Related
Disclaimer​
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
I have the Verizon LG G3 with build 12b installed (Was updated by the store when I purchased phone). Is there anyway to unlock the boot loader and root the device as is, or roll the device back to a previous build that is easily unlockable/rootable?
You should have posted in the q&a forum area.
Anyhow - if you want to root, and install a custom recovery (twrp), use the kdz method to get back to 10b:
http://forum.xda-developers.com/showthread.php?p=56484240
Then from this forum area install the bump/twrp from autoprime, and make sure to either freeze system updates or rename the two LGDMSClient files in /system/app. The freeze or rename is so new ota don't get pushed onto your phone after you get the custom recovery (twrp). Otherwise you'll needed the solution in the "stuck in custom recovery" thread:
http://forum.xda-developers.com/showthread.php?p=56061720
(It is handy to download the "stuck" zip onto your phone as a just-in-case. If you do get an ota, and your phone keeps booting to recovery, tell twrp to Install the zip to clear the ota files )
HTH!
I am trying that method now (actually before you replied) but the kdz file is taking for ever to download. Been running for 30 minutes and still showing 7 hours remaining. I have a really fast internet connection but that one file doesn't wanna download!
markfm said:
You should have posted in the q&a forum area.
Anyhow - if you want to root, and install a custom recovery (twrp), use the kdz method to get back to 10b:
http://forum.xda-developers.com/showthread.php?p=56484240
Then from this forum area install the bump/twrp from autoprime, and make sure to either freeze system updates or rename the two LGDMSClient files in /system/app. The freeze or rename is so new ota don't get pushed onto your phone after you get the custom recovery (twrp). Otherwise you'll needed the solution in the "stuck in custom recovery" thread:
http://forum.xda-developers.com/showthread.php?p=56061720
(It is handy to download the "stuck" zip onto your phone as a just-in-case. If you do get an ota, and your phone keeps booting to recovery, tell twrp to Install the zip to clear the ota files )
HTH!
Click to expand...
Click to collapse
Check post 150 in that thread. annoyingduck posted a second link
markfm said:
Check post 150 in that thread. annoyingduck posted a second link
Click to expand...
Click to collapse
I think I am in love with you, JK.....seriously though thanks a bunch....downloading the Mega link now and it seems to be going MUCH faster.
Did it work for you? I tried to downgrade, when phone said 100% it rebooted. I had a dark screen.... Went to the Verizon store, was told it was hard bricked. Haven't tried rooting my replacement yet.
Early adopter, got my phone in July, used the original ioroot, never had to revert.
The kdz method has had quite a few people who succeeded, based on what I read, no idea why it went bad for you. If you are gun shy, understandable, post 2 of annoying duck's thread has a link for the tot approach, supposed to be a slightly more pita way but not too exotic. Key is to flash any existing g3 drivers on your PC, install the proper things used by the tot method.
martinez5241 said:
Did it work for you? I tried to downgrade, when phone said 100% it rebooted. I had a dark screen.... Went to the Verizon store, was told it was hard bricked. Haven't tried rooting my replacement yet.
Click to expand...
Click to collapse
Anyway to downgrade without this happening? I want to run stock lollipop on my G3 but so far am stuck at the VS98512b update too
_AI_ said:
Anyway to downgrade without this happening? I want to run stock lollipop on my G3 but so far am stuck at the VS98512b update too
Click to expand...
Click to collapse
I did the kdz method. Omg you run the program and it starts don't click on any notifications, just let it run. Sorry about the late response.
So, its been a rough time with this phone. I received it rooted and im really a noob to any of this, its a verizon phone, its labeled outside, and when you remove the battery it says model VS985. But in the settings it says otherwise. I placed an att sim card in it, and it worked fine, i just had some errors on the rom that i have no idea how to fix, it all just seems like a hassle to me, so i decided to unroot it to the best of my ability. I managed to download everything and when i ran the lg flash tool, i selected the firmware i downloaded, the verizon one, but when i tried to run it, it would say "Device Model is different" "factory model check error" or something like that, it would identify the phone has D850, which is at&t version.
So i went ahead and said **** it, i downloaded that version and went with that, something messed up and it ended with factory reset status 2 instead of 3.
So i had to select BOARD instead of UPGRADE in the flash tool. and it reset everything, booted with att logo and everything, now the only problem is i don't get any signal, at all. Any help?
cedric182 said:
So, its been a rough time with this phone. I received it rooted and im really a noob to any of this, its a verizon phone, its labeled outside, and when you remove the battery it says model VS985. But in the settings it says otherwise. I placed an att sim card in it, and it worked fine, i just had some errors on the rom that i have no idea how to fix, it all just seems like a hassle to me, so i decided to unroot it to the best of my ability. I managed to download everything and when i ran the lg flash tool, i selected the firmware i downloaded, the verizon one, but when i tried to run it, it would say "Device Model is different" "factory model check error" or something like that, it would identify the phone has D850, which is at&t version.
So i went ahead and said **** it, i downloaded that version and went with that, something messed up and it ended with factory reset status 2 instead of 3.
So i had to select BOARD instead of UPGRADE in the flash tool. and it reset everything, booted with att logo and everything, now the only problem is i don't get any signal, at all. Any help?
Click to expand...
Click to collapse
Somewhere in the g3 forums is an unbranded DLL file. It is my understanding from reading about it previously, you need to use that to allow you to flash the proper firmware. The DLL file was made to fix this exact issue from what I read before.
bweN diorD said:
Somewhere in the g3 forums is an unbranded DLL file. It is my understanding from reading about it previously, you need to use that to allow you to flash the proper firmware. The DLL file was made to fix this exact issue from what I read before.
Click to expand...
Click to collapse
Really? any more info on how to find it?
cedric182 said:
Really? any more info on how to find it?
Click to expand...
Click to collapse
I wish I could point you right to it, unfortunately you may have to browse similar help threads to yours until you find it.
I have the exact same problem but mine is seen as a d855 when it is a vs985 if you can find that .dll file please tell me as well! I am going to search for it now
cedric182 said:
So, its been a rough time with this phone. I received it rooted and im really a noob to any of this, its a verizon phone, its labeled outside, and when you remove the battery it says model VS985. But in the settings it says otherwise. I placed an att sim card in it, and it worked fine, i just had some errors on the rom that i have no idea how to fix, it all just seems like a hassle to me, so i decided to unroot it to the best of my ability. I managed to download everything and when i ran the lg flash tool, i selected the firmware i downloaded, the verizon one, but when i tried to run it, it would say "Device Model is different" "factory model check error" or something like that, it would identify the phone has D850, which is at&t version.
So i went ahead and said **** it, i downloaded that version and went with that, something messed up and it ended with factory reset status 2 instead of 3.
So i had to select BOARD instead of UPGRADE in the flash tool. and it reset everything, booted with att logo and everything, now the only problem is i don't get any signal, at all. Any help?
Click to expand...
Click to collapse
If you are 100% sure you do in fact have the Verizon LG G3 (VS985), replace the Verizon DLL file with the Generic LG G3 DLL below. This error is most common if you have changed the Product Name, Product Model, Display ID, and/or Build ID entries in the build.prop
The generic dll file is on autoprime's site. It's named LGUP_8974.dll and can be found here- http://downloads.codefi.re/autoprime/LG/LG_G3 Use that along with the Verizon firmware Instead of the Verizon dll
Hawkswind thank you so much!! that worked for me now i am going to flash back the verizon .dll file
Thank you.
I'm in search of firmware for the S4 running 4.3 or 4.4. I haven't gotten this phone yet but verizon is selling it through Walmart on prepaid. I know the firmware isn't gonna be the same as if it was on contract verizon. I have the S3 right now and it's prepaid. Many argued that there wasn't a NF5 firmware but turns out there is and i used it many times to fix soft bricks on the S3 using Odin. So I'm pretty sure the prepaid side of the S4 will have different firmware then one on contract verizon would have. So that being said, does anyone have 4.3,4.4 or even 5.0 firmware they can share that will work with Odin? Not sure if the S4 got the 5.0 update. Just assuming it did. Any help is appreciated!
Anyone? Please?
If no one can then someone at least tell me how it direct me to where I can make a tar or md5 firmware out of adb pulls of the system an stuff?
bjf189 said:
If no one can then someone at least tell me how it direct me to where I can make a tar or md5 firmware out of adb pulls of the system an stuff?
Click to expand...
Click to collapse
OK never mind. I need 5.0.1 firmware. Not 4.3 or 4.4. Any help would be great
I can't think of any reason as to why post paid firmware would be different than prepaid. You can use the phone for either.
And you're posting jn the wrong forum, which is probably why nobody is helping you. Because you didn't bother to read the rules before posting.
Try the general section or Android development section. Click the search button and type firmware. I'm sure you'll find it faster than it took you to make all these posts. Good luck
still no help
sob372 said:
I can't think of any reason as to why post paid firmware would be different than prepaid. You can use the phone for either.
And you're posting jn the wrong forum, which is probably why nobody is helping you. Because you didn't bother to read the rules before posting.
Try the general section or Android development section. Click the search button and type firmware. I'm sure you'll find it faster than it took you to make all these posts. Good luck
Click to expand...
Click to collapse
still no help
I think what sob372 was saying is the hardware in the phone is the same as the contract so you can just follow the SCH-I545 stuff and it will work.
being that I just got this same phone S4 prepaid used I'll be playing with it to root it, install safestrap and probably downgrade it from Lollipop to Kitkat. So I'll let you know if you don't find more here by searching and I'm sure there are relevant posts if you dig around a bit.
BTW the S4 PP does have a SIM slot.
droidzer1 said:
BTW the S4 PP does have a SIM slot.
Click to expand...
Click to collapse
It just seems really sketchy to do with the contract firmware. Like I get the feeling that if I flash the firmware from contract, I'll lose any cell phone service under prepaid. I just don't want to end up with a big paper weight. The modules could be different. With the S3 I had which was prepaid also. I used safestrap and superlite rom was the best one I got to work with the prepaid version. The system always kept crashing but it would load if I put it under stock an not a rom slot. I had to get the i535pp module to fix the Wi-Fi problem but if I had no service cause of the sim issue then I didn't want it. Also I'm not sure but I think there is no safe strap for the s4 running lollipop. I believe the forum said it would cause bootloops if you tried. Just like you need to deodex for xposed cause of the changes in art
droidzer1 said:
BTW the S4 PP does have a SIM slot.
Click to expand...
Click to collapse
If you can confirm all is in working order with the contract firmware (can't remember what the build is) with the prepaid phone, I'll give it a go.
Update
A member already tried the OC1 postpaid firmware on the prepaid. They said all works but the camera and charging don't work. So that's out of the question
I been looking around on the net and best I've come up with is backing up the firmware. I tried using flash fire to get back ups of every partition. Then I used Odin package creator to try an make a firmware file to use with Odin but when I tried it out in Odin, it stopped at data so I took out my personal data then it stopped at something with number 3 at the end. Can't recall what it was. So if anyone can test more on this to have any luck. Maybe then we can get the firmware out to people in case sammobile decides not to or takes another year to release it
I've been trying a different approach to getting a copy of the OH7 firmware. I've been attempting to use Fiddler4 + the Verizon Wireless Software Upgrade Assistant tool that comes on my phone (Verizon Prepaid Galaxy S4 model SCHI-545KPP) to get a download link to the original rom file... I can't get the bloody link to download with Fiddler or an internet browser, as i get a 403 forbidden error. I'll keep trying, maybe I can find the downloaded file in my temp files while attempting to recover my phone? It will take some time but I'll keep trying.
*update* So I located where the Verizon Wireless Software Upgrade Assistant stores its files (compressed and extracted). The location is C:\Users\[username]\AppData\Roaming\Verizon_AR .
I unfortionally didn't figure this out until after I royally soft bricked my phone. Right now I have a OF1 recovery installed on the phone, and the assistant keeps trying to install the OF1 firmware (and it fails). If anyone could check that folder for the OH7 firmware, or post a backup of the OH7 recovery, you'd be doing me a huge favor. I think we'll have the OH7 firmware after this one way or another.
*edit* This is 100% confirmed now. C:\Users\[username]\AppData\Roaming\Verizon_AR\SCH-I545_I545VRUGOF1_FACTORY\decrypt produced a zip file that is 100% identical to the OF1 firmware zips out there. This decrypt subfolder didn't appear until after the file was completely downloaded, and the Software Repair Assistant had started to try and flash the rom. This data is deleted after the phone completes flashing (or fails to flash). If you select "delete" after this information is downloaded, the encypted rom file is deleted and you must start all over again.
If someone could check that folder who has used the Verizon Wireless Software Upgrade Assistant to recover their phone, using the tool on your phone again and you'll get the decrypt folder... if you zip/rar that folder, we'll finally have the backup files we can post somewhere.
the PP phone uses the same firmware as the normal one that guy that tried it
did something wrong
just flash the OF1 tar via odin and be done with it
TheXev said:
*update* So I located where the Verizon Wireless Software Upgrade Assistant stores its files (compressed and extracted). The location is C:\Users\[username]\AppData\Roaming\Verizon_AR .
I unfortionally didn't figure this out until after I royally soft bricked my phone. Right now I have a OF1 recovery installed on the phone, and the assistant keeps trying to install the OF1 firmware (and it fails). If anyone could check that folder for the OH7 firmware, or post a backup of the OH7 recovery, you'd be doing me a huge favor. I think we'll have the OH7 firmware after this one way or another.
*edit* This is 100% confirmed now. C:\Users\[username]\AppData\Roaming\Verizon_AR\SCH-I545_I545VRUGOF1_FACTORY\decrypt produced a zip file that is 100% identical to the OF1 firmware zips out there. This decrypt subfolder didn't appear until after the file was completely downloaded, and the Software Repair Assistant had started to try and flash the rom. This data is deleted after the phone completes flashing (or fails to flash). If you select "delete" after this information is downloaded, the encypted rom file is deleted and you must start all over again.
If someone could check that folder who has used the Verizon Wireless Software Upgrade Assistant to recover their phone, using the tool on your phone again and you'll get the decrypt folder... if you zip/rar that folder, we'll finally have the backup files we can post somewhere.
Click to expand...
Click to collapse
I'm trying out your idea. If i can get the file them I'll upload it. If not, I'll still be able to at least send you a back up of the oh7 recovery. Mines all still stock. Id hate to get stuck with a paperweight until the correct firmware is released. That's why I'm careful lol. The firmware is downloading right now. It says it's a enc4 file though. Maybe just cause its downloading at the moment. I'll just wait an see an I'll let you know
Legitsu said:
the PP phone uses the same firmware as the normal one that guy that tried it
did something wrong
just flash the OF1 tar via odin and be done with it
Click to expand...
Click to collapse
A few people who used of1 on the pp version had issues. Not one came out with no issues far as i know. So I'd rather be safe then sorry. Not saying your incorrect but I'm just trying to play it safe and careful. Appreciate the input though
bjf189 said:
I'm trying out your idea. If i can get the file them I'll upload it. If not, I'll still be able to at least send you a back up of the oh7 recovery. Mines all still stock. Id hate to get stuck with a paperweight until the correct firmware is released. That's why I'm careful lol. The firmware is downloading right now. It says it's a enc4 file though. Maybe just cause its downloading at the moment. I'll just wait an see an I'll let you know
Click to expand...
Click to collapse
Yes, while it is downloading it will be a .enc4 file. Even after downloading it will stay like that, but when you got to actually flash the file, it will decrypt and the encrypted version will appear in that /decrypt folder.
TheXev said:
Yes, while it is downloading it will be a .enc4 file. Even after downloading it will stay like that, but when you got to actually flash the file, it will decrypt and the encrypted version will appear in that /decrypt folder.
Click to expand...
Click to collapse
so im confused. do i need the encrypted or decrypted file for it to work with odin? i tried changing the file to zip format and open it with winrar after it downloaded in the software but it came up as an unknown archive or damaged. so im not sure what im doing wrong but ill keep trying
UPDATE: i have tried getting the file through verizons handy tool and i did get the decrypted folder along with the unzip folder during it was finishing up repairing my s4. i just copied the file from the decrypted folder and extracted it during the repair. so now im using odin 3.10.7 and testing it out now to see if it will flash successfully. if all goes well, i will make new thread with the firmware link inside it so users dont need to scroll through pages to find the link. first anyone know a good or popular upload storage i can use to upload the firmware to for others to use? i tried uploading onto here but i keep getting a connection timeout
UPDATE 2: ive got it! i made the firmware of OH7! finally. you can go ahead and head over to this thread TheXev. use it and youll be back to stock
http://forum.xda-developers.com/gal...nt/firmware-release-galaxy-s4-i545pp-t3365371
bjf189 said:
so im confused. do i need the encrypted or decrypted file for it to work with odin? i tried changing the file to zip format and open it with winrar after it downloaded in the software but it came up as an unknown archive or damaged. so im not sure what im doing wrong but ill keep trying
UPDATE: i have tried getting the file through verizons handy tool and i did get the decrypted folder along with the unzip folder during it was finishing up repairing my s4. i just copied the file from the decrypted folder and extracted it during the repair. so now im using odin 3.10.7 and testing it out now to see if it will flash successfully. if all goes well, i will make new thread with the firmware link inside it so users dont need to scroll through pages to find the link. first anyone know a good or popular upload storage i can use to upload the firmware to for others to use? i tried uploading onto here but i keep getting a connection timeout
UPDATE 2: ive got it! i made the firmware of OH7! finally. you can go ahead and head over to this thread TheXev. use it and youll be back to stock
http://forum.xda-developers.com/gal...nt/firmware-release-galaxy-s4-i545pp-t3365371
Click to expand...
Click to collapse
Thank you so much. I was close to taking this phone back and not getting another simply because I really need a phone to replace my S3 for tethering soon. But if you got the firmware, I can flash it back to working order, and hopefully get some deodexed roms (that way I can install Xposed framework). Thanks again!
Recently I Rooted My Sprint G3 Lolipop. Had no Issues there. Then I wanted to install TWRP, So I downloaded AutoRec, waited for the app to confirm everything and installed it. When I turned my phone off and tried to reboot into recovery, it Gives me a screen that has the LG Logo and it says Security Error and turns back off. I can still go into download mode but thats all I can do.
Ive read the other posts for this problem but i havent found one for my specific Phone.
Can anybody please help me with step by step Instructions?? Im still not super expirenced in rooting phones and the other phones I have rooted have always been successful..
Sprint LG G3 5.0.1
LS990ZVC
Heres a link to that same problem. The member experiencing the issue fixed it by flashing a .tot file from a previous ZV version he went from ZVA to ZV4 u should be able to do that i believe by using the 2014 lg flash tool, look it up. While i dont like flashing different ZV versions myself i think u might be safe for the most part.
Me personally think but might be wrong so dont quote me.. Lol but i would flash using a ZVB tot/kdz in the 2014 flash tool and i believe the lg support tool will then upgrade u back to ZVC if not the LGUPtool i mean your taking it from a noob but i think i stand correct here lol
http://forum.xda-developers.com/sprint-lg-g3/help/help-security-error-t3177905
Thanks. Actually didn't even waste my time on it. I still flash and do everything else with my phone. Found out it was a authentication code or something like that. Thanks for the reply back though!!!