This app changes the strings on ON/OFF switches to whatever you want. This is especially useful, when you use the language, that have the really long strings on those ON/OFF switches.
Xposed repo link: http://repo.xposed.info/module/si.kv1dr.slolanguagefixer
Source code: https://github.com/kv1dr/slo-language-fixer
Current version: 1.2.3
Changelog:
v1.2.3:
- Some changes reverted
- Added french translation(thanks to @Micks29)
v1.2.2:
- Added slovakian translation(thanks @Ja_som)
- Smaller apk size(Removed support library, because it was not needed at all. Thanks again @Ja_som for a suggestion)
- Some small changes
v1.2.1:
- Little bug fixed
v1.2:
- International release (the app is now avaliable to everyone, previously, it was limited to slovenian users only)
- New icon
- New app name
- Published on Google play
Reserved again
Hi, I want to try this on my Moto G, but Play Store link shows "Item not found", repo link is for " Slovenian Language Fixer".
In Xposed Installer I can't find "ON/OFF Switches Name Changer"
Installed apk from attachment, works fine, thank you.
Sent from my tablet./Odoslané z môjho tabletu.
Ja_som said:
Hi, I want to try this on my Moto G, but Play Store link shows "Item not found", repo link is for " Slovenian Language Fixer".
In Xposed Installer I can't find "ON/OFF Switches Name Changer"
Sent from my tablet./Odoslané z môjho tabletu.
Click to expand...
Click to collapse
Google need some time to publish the app. For the Xposed Installer, refresh the repo by clicking the button in the top right corner(Download section in Xposed Installer of course).
EDIT: I'm glad it works for you now.
App closes with an error at startup. But switches names are changed to Slovakian.
SergerDest said:
App closes with an error at startup. But switches names are changed to Slovakian.
Click to expand...
Click to collapse
Can you send me a logcat? Or, if you don't know how to do that, it's easier to install this app from Google play, run it to show the force close window, and then choose "Report". Thanks
kv1dr said:
Can you send me a logcat? Or, if you don't know how to do that, it's easier to install this app from Google play, run it to show the force close window, and then choose "Report". Thanks
Click to expand...
Click to collapse
Take a logcat.
SergerDest said:
Take a logcat.
Click to expand...
Click to collapse
Thank you. I will send you a new test version in a minute or two.
EDIT 2: The new version was also uploaded to Google Play and Xposed Repo now.
Hi, I sent pull request to your module for slovak language.
You also can delete "android-support-v4.jar" file from libs folder, so your app will be smaller after install (now it has ~1MB)
Can you please tell me what changes your module (e.g. which string in which apk) ?
Thank you.
Ja_som said:
Hi, I sent pull request to your module for slovak language.
You also can delete "android-support-v4.jar" file from libs folder, so your app will be smaller after install (now it has ~1MB)
Can you please tell me what changes your module (e.g. which string in which apk) ?
Thank you.
Click to expand...
Click to collapse
Thank you very much for translation.
As you can see here https://github.com/kv1dr/slo-langua...main/java/si/kv1dr/slolanguagefixer/main.java , it changes the string systemwide and not on single apk.
Code:
XResources.setSystemWideReplacement("android", "string", "capital_on", prefs.getString("switchon_text", "VKL."));
In this line, it changes string "capital_on" in whole android with "switchon_text" from preferences.
The support library is now deleted. I don't even know why it was there in the first place. The new release with smaller size and slovakian translation is comming soon.
The new version was released. The new apk is avaliable, as usually, on the Xposed Repo, on the first post of this thread, and on Google Play. On the Google Play, it needs some time for update to be avaliable.(not my fault, but Google's)
Doesn't change anything on my nexus 5 stock rooted...or have i misunderstood something and it is not compatible with italian language?
Doesn't change anything on my S4 with Mahdi
gian569 said:
Doesn't change anything on my nexus 5 stock rooted...or have i misunderstood something and it is not compatible with italian language?
Click to expand...
Click to collapse
MJD said:
Doesn't change anything on my S4 with Mahdi
Click to expand...
Click to collapse
Guys, do you have Xposed installed, this module activated and did you reboot afterwards?
kv1dr said:
Guys, do you have Xposed installed, this module activated and did you reboot afterwards?
Click to expand...
Click to collapse
Of course I have xposed installed and have rebooted 3 times trying it but there were no changes visible.
MJD said:
Of course I have xposed installed and have rebooted 3 times trying it but there were no changes visible.
Click to expand...
Click to collapse
Whoops, I did something stupid with latest release. Wait for next update.
kv1dr said:
Whoops, I did something stupid with latest release. Wait for next update.
Click to expand...
Click to collapse
French translation done !
Micks29 said:
French translation done !
Click to expand...
Click to collapse
Thank you. The fixed version was released including your translation. Please report back if it works for you.
kv1dr said:
Thank you. The fixed version was released including your translation. Please report back if it works for you.
Click to expand...
Click to collapse
Works fine, thanks!! :good:
Related
By popular demand, I have packaged my patched WVGA HTC_CIME Chinese Input (no longer dependent on HTC frameworks) into an update zip for applying on a ROM of your choice.
DOWNLOAD
Enjoy!
P
paulobrien said:
By popular demand, I have packaged my patched WVGA HTC_CIME Chinese Input (no longer dependent on HTC frameworks) into an update zip for applying on a ROM of your choice.
DOWNLOAD
Enjoy!
P
Click to expand...
Click to collapse
can't read chinese but thanks, paul and welcome back we miss yah
Is it too much to ask for an update to r21? .
I've been using Cyanogen because r21 got too buggy, but I love the sense ui.
An update to R21 will come... i'm looking over the new Asia Desire release now...
Patience!
P
paulobrien said:
An update to R21 will come... i'm looking over the new Asia Desire release now...
Patience!
P
Click to expand...
Click to collapse
You are the man! Man!
A light of hope is all I needed.
paulobrien said:
By popular demand, I have packaged my patched WVGA HTC_CIME Chinese Input (no longer dependent on HTC frameworks) into an update zip for applying on a ROM of your choice.
DOWNLOAD
Enjoy!
P
Click to expand...
Click to collapse
Hi Paul, is there a way to make it in .apk like jonasl does? thank you in advance!
Thanks so much, my hero
Thank you very much!!!
But the cime can only show tradition chinese, and it can't show both of simplified & tradition
Oh my gosh thank you so much paulobrien! I've been waiting for this! Will try out with enomther's ROM.
Thanks so much!!!
I tried to install into Desire r21 but unable to get it to work. Thanks.
heehee2001hk said:
Thank you very much!!!
But the cime can only show tradition chinese, and it can't show both of simplified & tradition
Click to expand...
Click to collapse
do you mean show or type? if type you can enable it from the setting...
Cheers,
Kiay
Hi it is possible to have a setting on keyboard to choose Trad/Simp Chinese?
I don't know if it is too much to ask for.
It is better 'cos I sms with TW/HK/PRC ppl always.
With Google Pinyin, they have it all shown together. Very difficult somethings to choose.
johnsin said:
I tried to install into Desire r21 but unable to get it to work. Thanks.
Click to expand...
Click to collapse
Some problem here! I got a small size keyboard and crash when I type.
(In Mocado Desire r21)
Unfortunately, very unstable at this point..Will be nice if you can make apk for it too...
Great work thou, will be cool if you can get it to work.
guess i'm kind of a newb when it comes to this stuff but how exactly do I install this?
i see an apk but there's a bunch of other stuff in the file as well that I don't know what to do with...
(i'm running CM)
The current version is a little buggy with enom 1.8.1, but I'm so happy that paulobrien has made it available for other ROM users like me. Thanks so much! Looking forward to an update~
Force Close
It works great after installed with default settings. But when I go to settings page show below it kept force close.
Touch Input Chinese -> Select Chinese input
or
Touch Input Chinese -> Chinese Input Settings -> Chinese mode
I have the newest HTC_IME installed as well.
any idea please??
iammcse said:
It works great after installed with default settings. But when I go to settings page show below it kept force close.
Touch Input Chinese -> Select Chinese input
or
Touch Input Chinese -> Chinese Input Settings -> Chinese mode
I have the newest HTC_IME installed as well.
any idea please??
Click to expand...
Click to collapse
You need to enter settings from the keyboard, not SETTINGS / language & keyboard... http://forum.xda-developers.com/showthread.php?p=6498609&highlight=cime#post6498609
skma said:
Hi it is possible to have a setting on keyboard to choose Trad/Simp Chinese?
I don't know if it is too much to ask for.
It is better 'cos I sms with TW/HK/PRC ppl always.
With Google Pinyin, they have it all shown together. Very difficult somethings to choose.
Click to expand...
Click to collapse
Long press the gear/中 key, then select "Touch Input Chinese", then "Chinese input settings", then "Traditional" or "Simplified". If you restart your phone, the default is always Traditional.
codington said:
Long press the gear/中 key, then select "Touch Input Chinese", then "Chinese input settings", then "Traditional" or "Simplified". If you restart your phone, the default is always Traditional.
Click to expand...
Click to collapse
You mean "Chiniese Mode" after selct "Chinese input settings", I get Force everytime.
Hi,there is a new MIUI 2.4.20 at the link below; if anyone can mirror it to us,i will be appreciated.My country forbid to access to 4shared
http://www.4shared.com/zip/8Lw4Mjve/MIUI_streak_2420_by_HARAM.html
whats the difference ? its the same Nitin is doing??
jitin02 said:
whats the difference ? its the same Nitin is doing??
Click to expand...
Click to collapse
I don't know all the differences but it is not same as the Nitin's miui; it includes something from Hpa and it includes volume plus.
I can't read Korean so i can't understand all the differences.
Testing.
Would you please mirror it to another file sharing server?
I can't access to 4shared
http://arleybarros.com/MIUI_streak_2.4.20_by_HARAM.zip
arleybarros said:
http://arleybarros.com/MIUI_streak_2.4.20_by_HARAM.zip
Click to expand...
Click to collapse
Thank you!
Did you flash it?
How is the results?
yes i did.
i really dont know much about miui roms, but it looks very stable so far.
Here's another link (to my dropbox) if needed:
http://dl.dropbox.com/u/43165183/MIUI_streak_2.4.20_by_HARAM.zip
Haven't tried it though.
Thanks to both of you!
Does it have US English language?
Agent5150 said:
Does it have US English language?
Click to expand...
Click to collapse
Yes,also the translation is perfect.
You could try editing build.prop i changed the entries ending in.
ko to en
KR to EN
I got this info from the another thread here, but cannot remember which one.
I'm guessing here but you could try US and us.
I have know idea if it will work.
pjg_pigeon said:
You could try editing build.prop i changed the entries ending in.
ko to en
KR to EN
I got this info from the another thread here, but cannot remember which one.
I'm guessing here but you could try US and us.
I have know idea if it will work.
Click to expand...
Click to collapse
Be sure,it will work.I tried these settings many times.
Seems to work fine. A few cool apps have been added. Overall looks nice.
English Language
This Rom already have EN language, Setting > System > Input and Language, certainly by Korean language in the firstboot. I don't know Korean but I remember position of setting button when I set up my DS.
This Rom's slower than the first 2.2.40 MIUI rom and non support Unicode font
I am running this since last night and extended MIUI settings app works. Battery life is perhaps the best I have seen on any of the MIUI versions I have used on my Streak so far....
sinan33 said:
Thanks to both of you!
Click to expand...
Click to collapse
Nice rom
Well, a short review after clean install of this ROM
FIXED/ENHANCEMENTS:
1) wifi issues
2) app drawer works
3) clear voice however loudness bug still exists
4) superSU instead of SU
5) Keyboard skin and customization
Bugs/broken:
1) DND mode force closes
2) Music player lyrics
3) LED notification still buggy
4) app drawer can't be enabled on boot
5) xiaomi passport backup still doesn't work
6) localization issues, not many languages supported
7) battery life seems to be better but may show different result after calibration
End result: uninstalled after 6 hrs of use, reverting to fake CM9
Sent from my DELL PHABLET using Tapatalk 2
awesome rom!
looks amazing...
themed it to ics
running well...
great tweaks here and there...
recommended!!!
Various tweaks for Package Installer.
Description
Basic description: http://repo.xposed.info/module/com.pyler.xinstaller
Advanced description of app and all module features: http://pyler.wen.ru/XInstaller/Help.html
Translations
https://crowdin.com/project/xinstaller
For detailed description read description and changelogs in Xposed repo.
Thanks
- @GermainZ, @M66B, @hamzahrmalik, @rovo89, @MohammadAG, @caspase, @moneytoo and others who help me with coding
- translators, contributors
Contributions
Module is open source. Check it here:
https://github.com/pylerSM/XInstaller
Donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=6NTYA2HMPQHVW
DOWNLOAD:
http://repo.xposed.info/module/com.pyler.xinstaller
This goes without saying, but this module is a huge security risk if always enabled. After using it for whatever you want to use it for, disable it and reboot.
Sent from my HTC One_M8 using Tapatalk
Yes, it should not be always enabled. Enable it only when you need it.
What risks?
Thx, useful to switch between DEBUG and RELEASE builds :good:
A feature like 'enable for 1 minute' would be nice.
A simple ui with justa checkbox for the enabling/disabling of the module would bê a good adition.but not sure if it's possible
For what? You can enable or disable module in Xposed Installer.
pyler said:
For what? You can enable or disable module in Xposed Installer.
Click to expand...
Click to collapse
But after enabling /disabling you need to reboot, witch is the same as you unistalling the original apk and installing the New one with diferente signature
The only difference being you would keep the data
But it's only my personal opinion .
Yes, hm. It sounds well. I will do it.
RSDamasceno said:
What risks?
Click to expand...
Click to collapse
Someone who modifies a trusted app like Google play store with malicious codes can install it over the real app which has an encrypted signature
@pyler can we get gingerbread support plz?
v1.1:
Changes:
- added settings to control APK signature check (just click on module in Xposed Installer to launch module settings)
- support for android 2.3
pyler said:
v1.1:
Changes:
- added settings to control APK signature check (just click on module in Xposed Installer to launch module settings)
- support for android 2.3
Click to expand...
Click to collapse
Thank you for this module, but the setting in app is invalid, whenever I checked or unchecked the box in app, I must reboot device to make it work successfully, just like enable/disable this module in xposed installer then reboot.
Actually, I want to toggle this function easily, just bypass the annoying reboot process. It it technically possible?
This app screwed up something on my Nexus 5. I'm running CM11 and when I rebooted it showed basically what it did when I first installed the ROM. I used the TWRP file manager to delete the apk and everything went back to normal. Any ideas?
Sent from my Nexus 5 using Tapatalk
Same to me. Running this in my Galaxy S4 CM11 4.4.3 and after reboot I've "lost" all applications other than system ones. Then disabled xposed through recovery and got everything back but all Accounts section was lost.
Funny, but some time ago I made a similar module for development purposes (XDisableAppSignCheck on github).
This is very handy in development. But you should never use it in production! Especially on devices with important data.
This module gives me bootloops. Galaxy s3 cm 4.4.3
btw, removed setting because it doesnt work (can't work in initZygote) - v1.2
I dont know why it bootloops on CyanogenMod.. I tested it on stock Android 4.4.3 & TouchWiz 4.2.2 and all works. logs?
pyler said:
btw, removed setting because it doesnt work (can't work in initZygote) - v1.2
I dont know why it bootloops on CyanogenMod.. I tested it on stock Android 4.4.3 & TouchWiz 4.2.2 and all works. logs?
Click to expand...
Click to collapse
First time posting logs. Hopefully they're what you need. https://mega.co.nz/#!UEUGSZwY!D-SQ6U_GwP9ULxNV7k7rsFOvs1iRwpKQ4oXOh4DPAVY
Or https://www.dropbox.com/s/1mnsxynjyz2sro7/2014-06-17_00.50.zip
Sent from my GT-I9300 using Tapatalk 2
This is a simple mod to fill request by @AquilaChill located here. It's an adaptation of the original mod done by @Mr.Its located here and also by @MassiveEffect located here.
It spoofs the version number that the app sends to Micro$oft's servers. The app has a preference screen, which is located in Xposed Installer->Modules (no launcher icon per request).
Make sure you have your preferred version of Skype installed first, then launch the module preferences at least once.
It should work with older (<= 3.x) and newer versions (>= 4.x) of the Skype app. Once you change the spoofed version, make sure you fully exit Skype (kill app) before restarting it.
Also available in the Xposed Repo
You'll need to have the Xposed Framework installed and working for this module to do anything.
Changelog
v1.0 - Initial release
v1.1 - Reworded preferences to add clarification to module intent
Added support for dual Skype installations in preferences
Added module icon for preference screen
v1.2 - Fixed dual app support
v1.2.1 - Added support for older Skype app (<= 2.x)
It appears that Microsoft has changed how it gets an authenticated session. @PiggyFlooper has figured out how to get older versions of Skype working with the help of Titanium Backup and this module:
PiggyFlooper said:
Got Skype inverted 4.0.0....modded by theo0so to work with module v.1_2_1 on ics 4.0.3!
Used custom version in skypeX as current version 5.0.0.52727
Downloaded Skype from Play Store.
I'm not sure if this had anything to do with it, but, in Xprivacy, blocked /proc, serial, and getString in ID, and getDeviceid in Phone. -- (XPrivacy may not be needed per @nardeeno here)
Opened Skype and signed in. Backed up Skype with Titanium B.
Uninstalled Skype, reinstalled inverted version. Restored Skype data only in T.B.
Opened Skype and puh pow!
Click to expand...
Click to collapse
agentdr8 said:
This is a simple mod to fill request by @AquilaChill located here. It's an adaptation of the original mod done by @theos0o located here.
It spoofs the version number that the app sends to Micro$oft's servers. The app has a preference screen, which is located in Xposed Installer->Modules (no launcher icon per request).
It should work with older (<= 3.x) and newer versions (>= 4.x) of the Skype app. Once you change the spoofed version, make sure you fully exit Skype (kill app) before restarting it.
Also available in the Xposed Repo
Click to expand...
Click to collapse
What advantages if any are there to using an older version of the Skype Android application?
thanhdoku said:
What advantages if any are there to using an older version of the Skype Android application?
Click to expand...
Click to collapse
There are modded dark versions of older Skype versions and they're not as annoying as the newest version.
Also there is still non dark version of the newest Skype version.
I love modules like this but I gotta say that the latest version of Skype works the best. It got best battery, push so messages almost always gets delivered and it syncs messages when logging in fast and seamless. You can even greenify skype while logged in and you will receive messages anyway due to push. Means absolute minimum battery/memory usage
After I installed Skype 3.2 and Skype X module, I try to connect, but " You cannot to sign at this time. Try yor settings connection bla bla bla ..." Why ?
cristicaras said:
After I installed Skype 3.2 and Skype X module, I try to connect, but " You cannot to sign at this time. Try yor settings connection bla bla bla ..." Why ?
Click to expand...
Click to collapse
Are you using a Microsoft login by chance? I ran into this when I was testing on the older versions, and it only let me connect if I used a Skype login.
agentdr8 said:
Are you using a Microsoft login by chance? I ran into this when I was testing on the older versions, and it only let me connect if I used a Skype login.
Click to expand...
Click to collapse
No, I used my Skype acount.
cristicaras said:
No, I used my Skype acount.
Click to expand...
Click to collapse
What version did you spoof? I tested Skype v3.2.x using the 5.0.x spoof and it let me login using the Skype account.
Also, did you run the mod preferences at least once after Skype was installed? It needs to grab the installed version and write it to the preferences file in order for the module to work.
agentdr8 said:
What version did you spoof? I tested Skype v3.2.x using the 5.0.x spoof and it let me login using the Skype account.
Also, did you run the mod preferences at least once after Skype was installed? It needs to grab the installed version and write it to the preferences file in order for the module to work.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=42426671&postcount=2941&nocache=1&z=8957994726952165
I try v.19.1 inverted ,with Microsoft acount, I select 3.2.0.06673 in Skype X module, but I can't sign in.0
cristicaras said:
http://forum.xda-developers.com/showpost.php?p=42426671&postcount=2941&nocache=1&z=8957994726952165
I try v.19.1 inverted ,with Microsoft acount, I select 3.2.0.06673 in Skype X module, but I can't sign in.0
Click to expand...
Click to collapse
Try using 5.0.0.49715 as the spoofed version.
Thank you
Thank you for making this, but seems have some things to debug, I'll send you a link of my whole xposed log
Tested on 4.0.0.17847 v20b inverted & not working, according to logs it seems to think I'm on skype <== 3 & throws some java errors after that, on my stock rooted TW 4.2.2 MF9 SGS4 SPH-L720.
But I'd like to point out that theos0o didn't spoof anything (other people posted spoofed versions of his great mod), theos0o moded skype to do things like video chat on more devices, selectable notification sounds, bluetooth tweaks & other nice things.
In the app its not clear whether to select the version your trying to spoof (installed) or what your trying to spoof it as (newer version that MS allows to connect).
AquilaChill said:
Thank you for making this, but seems have some things to debug, I'll send you a link of my whole xposed log
Tested on 4.0.0.17847 v20b inverted & not working, according to logs it seems to think I'm on skype <== 3 & throws some java errors after that, on my stock rooted TW 4.2.2 MF9 SGS4 SPH-L720.
But I'd like to point out that theos0o didn't spoof anything (other people posted spoofed versions of his great mod), theos0o moded skype to do things like video chat on more devices, selectable notification sounds, bluetooth tweaks & other nice things.
In the app its not clear whether to select the version your trying to spoof (installed) or what your trying to spoof it as (newer version that MS allows to connect).
Click to expand...
Click to collapse
It's possible that particular version of the Skype app uses a different getVersion() method (or d() method in the old <= 3.x).
I can add clarification to the preferences so that it's clearer regarding what exactly the module will do.
I try to keep 2 versions simultaneus. Latest version,for Wifi,and v.19.1,for 3G connection. For that I modified 19.1 package name in Androidmanifest.xml (com.skype_mod.ryder).That is the reason for I can't sign in,but in other device,only Skype 19.1,with your Skype X module,work fine. Thank you sir for your great work. It is possible keep two Skype versions in same device ? Skype 19.1 is more smooth for 3G connection. Thank you again, and sorry for my poor english. I'm romanian. Best regards.
cristicaras said:
I try to keep 2 versions simultaneus. Latest version,for Wifi,and v.19.1,for 3G connection. For that I modified 19.1 package name in Androidmanifest.xml (com.skype_mod.ryder).That is the reason for I can't sign in,but in other device,only Skype 19.1,with your Skype X module,work fine. Thank you sir for your great work. It is possible keep two Skype versions in same device ? Skype 19.1 is more smooth for 3G connection. Thank you again, and sorry for my poor english. I'm romanian. Best regards.
Click to expand...
Click to collapse
I can add a preference to allow you to type in a custom package name that you've altered in the manifest. Then it would apply the spoofed version to both the official com.skype.raider and com.skype_mod.ryder package.
AquilaChill said:
Tested on 4.0.0.17847 v20b inverted & not working, according to logs it seems to think I'm on skype <== 3 & throws some java errors after that, on my stock rooted TW 4.2.2 MF9 SGS4 SPH-L720.
Click to expand...
Click to collapse
I got your logs and downloaded the inverted v20 from theos0o's thread. When I tested it with the module, my log shows:
Code:
[2014-08-29 09:44:40] SkypeX: Installed Skype version is >= 4
[2014-08-29 09:44:40] SkypeX: setting version to 5.0.0.49715
And proceeds to log me in using my Skype login. Did you at some point have a 3.x version installed prior to the 4.x version? Try clearing data for the SkypeX module, which will wipe the preferences file. Open the module prefs and reselect your settings. Then try your Skype 4.0.0.17847 and see if it works.
Your preferences file located at /data/data/com.dr8.xposed.skypex/shared_prefs should resemble the following:
Code:
<?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<string name="skypever">4.0.0.17847</string>
<string name="manual_version"></string>
<string name="version">5.0.0.49715</string>
<boolean name="debug" value="true" />
</map>
agentdr8 said:
I can add a preference to allow you to type in a custom package name that you've altered in the manifest. Then it would apply the spoofed version to both the official com.skype.raider and com.skype_mod.ryder package.
Click to expand...
Click to collapse
Oooo !!! Thank you in advance. You are the best !
cristicaras said:
Oooo !!! Thank you in advance. You are the best !
Click to expand...
Click to collapse
Give the latest version a try and let me know if it works for you.
agentdr8 said:
Give the latest version a try and let me know if it works for you.
Click to expand...
Click to collapse
Thank you very much sir for your work. I installed SkypeX v1.1, but I can't sign in with Skype 19.1 modified. I don't know why. Other modification in Androidmanifest.xml ? I don't know. That is ! Your module is great. My gratitude for you . Best regards.
cristicaras said:
Thank you very much sir for your work. I installed SkypeX v1.1, but I can't sign in with Skype 19.1 modified. I don't know why. Other modification in Androidmanifest.xml ? I don't know. That is ! Your module is great. My gratitude for you . Best regards.
Click to expand...
Click to collapse
You enable the dual app mode, then type in the package name of your 2nd Skype app into the field below the switchbox. You said it was com.skype_custom.ryder or something of that sort? Can you enable debugging and send the xposed error.log to me?
your right I did have 3.2 & seems it did stick that in the prefs, perhaps have it check the installed version when you open the settings (orig thought it did) or a button to do so?
I need to reboot for v1.1, will test sooner or later
XShazamLite
With this lightweight module, You can add some Shazam features to Shazam-Lite app.
#Features
- Bypass Country-Limit
- Shazam Unlimited Songs (Default is 5)
- MakeItColorful! (Themer)
- Clear Matched Songs
- Cancel Pending Shazams
#Notes
- Long-Press menu button (Top-Right Corner) for XShazamLite's options.
- Only working with Shazam-Lite v1.1.0.
Thanks to @blunden, For the Idea
SourceCode
Download
Tested with last Shazam lite 1.1.0 and doesn't work, Shazam ask me to download the standard version or exit.
cioce said:
Tested with last Shazam lite 1.1.0 and doesn't work, Shazam ask me to download the standard version or exit.
Click to expand...
Click to collapse
Just updated the module. It's now support v1.1.0.
Good idea to make a module based on my hacked version. It might be worth pointing out that people shouldn't actually need to load this module more than once unless they need to register the app as it's seemingly a process that happens only on first start.
Btw. I updated my thread with an updated APK for those who don't have Xposed.
Very nice module, it worked here
New version v0.38 010717
- Added MakeItColorful (Themer)
works
drei.liter.milch said:
works
Click to expand...
Click to collapse
Glad to hear that :fingers-crossed:
doesnt work with v1.1.0-170321 on official nougat 7.0 xposed,it would be cool if you fixed it