[Q] GT-I9300 problem - Galaxy S III Q&A, Help & Troubleshooting

I was trying to root and install CWM, after install it crasched. I only had a "Downloading...." mode because Recovery didnt work.
I tried to install it by odin 3.09 1.87 and 3.08. When i turn on my phone he flashes Samsung logo since 2 hours. I can enter into Downloading mode but i dont know what to do. Please help me guys im depressed
PDA:
PDA_I9300XXUGNA8_ROOT_ODEX 21.01.2014 2372379
CSC:
CSC_I9300OXEGNA1_HOME_OXE_MULTI SER, SEK, RTL, SKZ, CAC
MODEM:
MODEM_I9300XXUGMK6
BOOTLOADER:
BOOTLOADER_I9300XXUGNA8

http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726

Im getting this error when im tryin to install stock rom using odin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
Click to expand...
Click to collapse

Related

Flashing JB on SIII

Hi
I have downloaded I9300XXDLIB_I9300OXFDLI1_XEO and flashed in windows XP with ODIN 3.07 all went smooth but now the phone and odin does not advance..
ODIN kept at hidden.img
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
and after 10 minutes does not finish flashing this rom...
I wonder if i must start the process again or what should I do?
i hope you can help me
Thanks in advance

[Q] Odin fail; Can't flash my S4, Please help me

Hi,
I tried to flash my Verizon Galaxy S4 but odin failed; I followed this guide, since I do not want to erase my pics.
http://forum.xda-developers.com/showthread.php?t=2301259
I couldn't check my build, so I tried all three factory images (VRUAMDK, VRUAME7,VRUDMI1)
I searched this forum and tried to change computer, cable, and usb port, but I still cannot flash.
Please help me to solve this problem.
FYI, here goes odin message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
newbie)Jay said:
Hi,
I tried to flash my Verizon Galaxy S4 but odin failed; I do not want to erase my pics, so I followed this guide.
http://forum.xda-developers.com/showthread.php?t=2301259
I couldn't check my build, so I tried all three factory images (VRUAMDK, VRUAME7,VRUDMI1)
I searched this forum and tried to change computer, cable, and usb port, but I still cannot flash.
Please help me to solve this problem.
FYI, here goes odin message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You probably need MK2: http://forum.xda-developers.com/showthread.php?t=2578209
Let me try
Oishikatta said:
You probably need MK2: http://forum.xda-developers.com/showthread.php?t=2578209
Click to expand...
Click to collapse
It worked!!! Thank you very much

[Q] Firmware upgrade encountered an issue

Mot sure what specs i need to list here. i have the sch-i545, 4.3 and MJ7.
Im trying to use odin to flash stock but i keep getting this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried another .tar and im now getting the firmware upgrade encountered an issue. please select recovery in kies & try again.
I am completely lost and activating my old droidx till this can be fixed.
Denots said:
Mot sure what specs i need to list here. i have the sch-i545, 4.3 and MJ7.
Im trying to use odin to flash stock but i keep getting this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried another .tar and im now getting the firmware upgrade encountered an issue. please select recovery in kies & try again.
I am completely lost and activating my old droidx till this can be fixed.
Click to expand...
Click to collapse
You're using an MDK Odin tar...you need to use an MJ7 Odin tar instead.
Sent from my SCH-I545 using XDA Premium 4 mobile app
I found this file
N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5
looks like same error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So where do i go from here?
Denots said:
I found this file
N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5
looks like same error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So where do i go from here?
Click to expand...
Click to collapse
Thats for the note 3. Here download this
I tried odin a few times on all of the tar's i have and continued to get the "succeed0/fail1" error but now i can boot up the phone to how i was before the "firmware upgrade error"
Waiting for the file you linked to finish downloading then giving it a try.
UPDATE
The file you linked worked, back on stock now time to get to rooting.
Denots said:
I tried odin a few times on all of the tar's i have and continued to get the "succeed0/fail1" error but now i can boot up the phone to how i was before the "firmware upgrade error"
Waiting for the file you linked to finish downloading then giving it a try.
UPDATE
The file you linked worked, back on stock now time to get to rooting.
Click to expand...
Click to collapse
You're welcome.
Sent from my SCH-I545 using XDA Premium 4 mobile app

[Q] Help! Samsung S3 GT-I9300 stuck on Download Mode, Failed in Odin

Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
zansan said:
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
Click to expand...
Click to collapse
Try flashing the latest TWRP through Odin. Download it from their website 2.8.6.1 in .tar format and flash. Then flash the stock firmware.

ODIN Fail

Hi All, I'm trying to update system in my galaxy s6 edge, but when odin ran the following message appear:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
any idea?
gera_conyers said:
Hi All, I'm trying to update system in my galaxy s6 edge, but when odin ran the following message appear:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
any idea?
Click to expand...
Click to collapse
Cable.
Reactivation lock is ON. It is shown in download mode whether on or off.
Sent from my GT-N7000
gera_conyers said:
Hi All, I'm trying to update system in my galaxy s6 edge, but when odin ran the following message appear:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
any idea?
Click to expand...
Click to collapse
Upgrade or downgrade?
I had the same issue with my S6. It fails if you try to downgrade.
And, are you "updating" to Marshmallow?[emoji106]
SOLVED
xEmre66 said:
Upgrade or downgrade?
I had the same issue with my S6. It fails if you try to downgrade.
And, are you "updating" to Marshmallow?[emoji106]
Click to expand...
Click to collapse
the problem was solved installing the right firmware for model sm-g925r6, unafortunatly marshmallos is not avilable for this model.

Categories

Resources