Hi!
Hi have bought the bluetooth headset Globalsat BT-808 (Mini Dolphin) and it is a great product! I use it with my Qtek 2020 to make and receive calls. I wanted to use it with my mobile computer as a headset audio device via BT. I paired the BTH-808 with my computer BT adapter (Microsoft XP SP2) as AUDIO DEVICE... but if I try to change the default audio device on my mobile computer (a Realtek AC'97 on the mainboard) and try to select another device, there isn't the BT headset... only realtek! How I can add the BT Audio Device from the BT paired devices among the PC Audio devices available???
Thank's
Cristian
First enable the audio gateway in the bluetooth application on your PC. After this it should be possible to choose the audio gateway as BT audio playback device.
You have to connect manually to hear the audio. The connection isn't made automatically.
Mark
markutah said:
First enable the audio gateway in the bluetooth application on your PC. After this it should be possible to choose the audio gateway as BT audio playback device.
You have to connect manually to hear the audio. The connection isn't made automatically.
Mark
Click to expand...
Click to collapse
And How to enable the Audio Gateway? Please tell me where I can find the option in BT Stack from Microsoft XP SP2 drivers...
Thank's
http://www.palowireless.com/infotooth/tutorial/profiles.asp
here is a list of the bluetooth profiles to get sereo audio to a bluetooth headset you require A2DP 0.95b Advanced Audio Distribution Profile
not sure if thats the same with mono audio
but i do think it rather likely that ms's default driver dont support many profiles at all
i would look into bluetooth software like vidcomm maybe you can install that it's bound to have more profiles then ms
ms dident invent bluetooth so they dont put a lot of efford into supporting it
[/quote]
Has anyone succeeded in a combination of these two with the Blue Angel device ?
If so, is the audio from the gps software also routed to your car stereo ? What bluetooth protocol would support this ? The parrot carkit supports both the Bluetooth Headset and Handsfree profile.
I think in the end, this would be the best future proof solution : buy a standard pda mount for the Blue Angel and share the parrot carkit between all bluetooth devices present in the car.
Any comments would be welcome !
Kristof
Ok,
I did a little bit of bluetooth research : in order to have MP3 playback using bluetooth, the device must support the bluetooth A2DP (Advanced Audio Distribution profile) profile. The A2DP profile was included in BT 1.2 spec.
I've read the thread on the HP MP3 headphones, and there they have a patch that will install the A2DP profile, though I'm not certain whether it is a HP specific implementation.
Some other interesting threads on this subject :
http://forum.xda-developers.com/viewtopic.php?t=12549
http://forum.xda-developers.com/viewtopic.php?t=10747
http://forum.xda-developers.com/viewtopic.php?t=7679
So I expect that sooner or later there is going to be a firmware upgrade or bluetooth stack upgrade from Broadcomm that includes this profile.
The next step would be the parrot : for what I know, it does not support the A2DP profile. I asked their sales department if they have any future products / firmware upgrades that will support this profile.
So once you enter your car, you would have to enable 3 (!) bluetooth connections :
Bluetooth headset profile -> mobile phone handsfree communication
Bluetooth A2DP profile -> regular audio coming from the device
Bluetooth Serial profile -> connection to gps
With all the bluetooth instabilities with the current protocol stack, I wonder if these three at the same time would ever be realistic. Does bluetooth support this kind of bandwith anyways ?
I have a Orange M2000 with the Parrott CK3300 (it has built in bluetooth GPS)- The bluetooth handsfree works fine as long as you update the handsfree kit to the latest firmware. Also you have to pair as a Windows CE device for it to connect whenever you get in the car.
The bluetooth GPS does work but I find I usually have to do a soft-reset and then launch tom tom which then connects to the GPS without a problem.
You do loose the GPS connection when you make or recieve a phone call, I'm not sure if this is a limitation of the handsfree kit or the M2000 though, I've only had if for 2 weeks so I'm still experimenting with it!
I can confirm that Bluetooth Dial-Up Networking (DUN) works after the 2.1 update using PDANet through my Sony VAIO on the Rogers Network.. yes! now I can fully take advantage of my 6GB data plan without wires!
Also, the PhoneBook Access Profile (PBAP) as well as pulling your recent calls list (not sure what profile that uses) works fine with Android 2.1 using my SE HBH-DS980 headset.
However, on an incoming call, the phone doesn't push the CallerID tag to the bluetooth device. The same goes for the MusicID tag when playing music. From my intuition, I don't think these 2 features require a specific bluetooth profile but will rather need to be implemented in the music or dialer applications to function. I'm not sure why SE is leaving this out on the 2.1 update as it is a huge selling feature for their MW600 headset. All SE phones powered by Symbian or part of the Walkman branding all had these features right out of the box, and the X1 running Windows Mobile had it as a 3rd party support (ie. smartwatchm). It would be nice if a developer can add these features for Android since SE won't.
It also doesn't have the Service Discovery Application Profile (SDAP) to be able to provide the list of available bluetooth services to the master device. This was tested using my SE X1a. So to actually find out what services are supported, you'll have to find out the hard way.
Can anyone tell me what other bluetooth profiles are available now?
Summary:
Confirmed Supported Bluetooth Profiles in 2.1 Update:
-Hands-free Profile (HFP)
-Headset Profile (HSP)
-Object Push Profile (OPP)
-Audio Video Remote Control Profile (AVCRP)
-Advanced Audio Distribution Profile (A2DP)
-PhoneBook Access Profile (PBAP)
Ok... i just found the supported bluetooth profiles in the X10
Advanced Audio Distribution Profile
Audio/Video Remote Control Profile
Generic Access Profile
Generic Object Exchange Profile
Handsfree Profile
Headset Profile
Object Push Profile
Phone Book Access Profile
Service Discovery Application Profile
Serial Port Emulation
Serial Port Profile
Source: http://developer.sonyericsson.com/cws/download/1/716/952/1284710360/DW-102192-X10_WP_6.pdf
i'm off to buy a gamepad now...
Ringtone over bluetooth
Hi there. i think this is a problem shared by many users:
i habe a Bluetooth Handfree, in this case, FIAT Blue&ME. When i connect for example a Nokia phone and the phone rings, the ring is transfered to the audio systems of the hands free. With my X10mini i hear only the default RING RING from the hands free :-(
Is there anyway to enable handfree transfer of the ringtone in Adroid?
there are persons that describe the same problem but not for android: for example at http://forum.xda-developers.com/showthread.php?t=634494
By the way also SMS messages cannot be transfered to my Hands free Blue&Me. Anyone have idea how to fix this?
I think a new application to solve ringtone transfer to handsfree would help ALOT of users.
Regards and thanks..
OpenWatch is an app that is downloadable from the Market that allows bluetooth devices (like SE MBW-200 Bluetooth watch with lcd screen) to receive call/SMS/alerts/music player controls/etc. It supports a couple of other devices as well.
see: http://www.smartmadsoft.com/
see: http://forum.xda-developers.com/showthread.php?t=554551
azian_advanced said:
I can confirm that Bluetooth Dial-Up Networking (DUN) works after the 2.1 update using PDANet through my Sony VAIO on the Rogers Network.. yes! now I can fully take advantage of my 6GB data plan without wires!
Also, the PhoneBook Access Profile (PBAP) as well as pulling your recent calls list (not sure what profile that uses) works fine with Android 2.1 using my SE HBH-DS980 headset.
However, on an incoming call, the phone doesn't push the CallerID tag to the bluetooth device. The same goes for the MusicID tag when playing music. From my intuition, I don't think these 2 features require a specific bluetooth profile but will rather need to be implemented in the music or dialer applications to function. I'm not sure why SE is leaving this out on the 2.1 update as it is a huge selling feature for their MW600 headset. All SE phones powered by Symbian or part of the Walkman branding all had these features right out of the box, and the X1 running Windows Mobile had it as a 3rd party support (ie. smartwatchm). It would be nice if a developer can add these features for Android since SE won't.
It also doesn't have the Service Discovery Application Profile (SDAP) to be able to provide the list of available bluetooth services to the master device. This was tested using my SE X1a. So to actually find out what services are supported, you'll have to find out the hard way.
Can anyone tell me what other bluetooth profiles are available now?
Summary:
Confirmed Supported Bluetooth Profiles in 2.1 Update:
-Hands-free Profile (HFP)
-Headset Profile (HSP)
-Object Push Profile (OPP)
-Audio Video Remote Control Profile (AVCRP)
-Advanced Audio Distribution Profile (A2DP)
-PhoneBook Access Profile (PBAP)
Click to expand...
Click to collapse
The "Audio Video Remote Control Profile (AVCRP)" is still at v1.0. We need a minimum of v1.3 to display track information on MW600.. :-(
I have a Jabra Clipper audio player to play my MP3's & streaming internet radio to my car stereo via 3.5mm jack. I also have my Moto BT headset that I use.
When I get a call the music is interrupted and I can answer the call with the Jabra Clipper and I can hear the call audio through the car speakers. The problem is my microphone on my phone is too far away on my car dock and people can't hear me.
So after answering the call I would have to go to settings, wireless, bluetooth and disconnect the Jabra and connect my Moto headset before I can take the call.
This is a pain and takes too long, is there a widget to swap paired BT devices? I cannot find anything in the marketplace.
Maybe a Tasker profile? I have Tasker but I haven't gotten any profiles to work yet.
I have a Droid X running Liberty 1.5.
Thanks.
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
PetRiLJoe said:
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
Click to expand...
Click to collapse
Thanks for your reply, what is CM7?
scramer said:
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Click to expand...
Click to collapse
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
ryant35 said:
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
Click to expand...
Click to collapse
Here is the link: http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Prior to the upgrade last week, the widget would only turn bluetooth on or off. With the update last week it added the option to have it open up the bluetooth (or wifi) options. This isn't automatic, you have to choose for it to do this in the options.
I don't know maybe the phone won't automatically connect with two items at once. It's a hassle to connect each time, but after the initial connection everything runs smoothly.
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
You saved me From buying a new stereo!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Thanks a ton! This $1.50 app saved me from having to purchase a new stereo!
Just to let you know, this solved the exact problem I was having, over five years later! Thanks!
ryant35 said:
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
Click to expand...
Click to collapse
Headphone Connect - One Click Audio is a really simple app that let's you connect / disconnect to your desired bluetooth headset.
You find it in the play store if you search for "Headphone connect - one click audio"
I realize this is an old post, but I recently released an app called ShortTooth: create customized single-click shortcuts to connect to any paired Bluetooth device.
I use it to disconnect from my home stereo when I get into the car (parked close enough to still be paired), and reconnect to my home stereo when I get back.
You could use it to create two shortcuts:
* Toggle Jabra
* Toggle Moto
Or you can create two rows:
* Connect Jabra | Discconnect Jabra
* Connect Moto | Discconnect Moto
It has a free 14-day trial.
Hi. I have a Galaxy S Wifi 3.6 (EU edition of Galaxy Player 3.6 - YP-GS1). I'm trying to stream audio to my Car Stereo (built-in Ford Fiesta audio). I have been able to pair my Galaxy to the Ford Audio bluetooth receiver doing this :
Enable BT discovery on my Galaxy
Search for devices
My Car Stereo gave me a pin and i entered it in my Galaxy
Now, i see a BT device named "Ford Audio" on the BT settings page, but it does show a phone icon. I don't know if this is right or not, as i don't have any other BT receiver to test. It shows as "paired" (even when i'm far from my car), but i havn't been able to get the Music from my Galaxy to the Car Stereo via A2DP so far.
I have installed a few different widgets from Google Play to control BT but no matter what Widget i try, i can't get the status to "connected" (for those Widgets that actually show a status). Also, when i try to use the menu of my Car Stereo, i can't see my Galaxy in the connected BT devices, whether i look into Phones or Audio / Bluetooth.
I guess i messed something up, but when searching on the net how to do this, it's always very simple : enable BT discovery, search and enter the PIN (which is exactly what i did). Then everything will work fine (actually, nothing works at al l )
EDIT : I should probably add i have Androïd 2.3.6 stock rom (non rooted). Version n° is GINGERBREAD.XXLD1.