Hi,
Like the title say I have the 'not registered on network' when I try to make a call or send a text but the 3G is working fine. I have read a lot of threads, and try a lot of things without any success, that's why I am coming to you to get some help. I have a rooted Samsung Galaxy SII 9100, and I am located in New Zealand with 2degrees.I have tried 3 different SIM card in the phone and none of them were working ( Vodafone, Telecom, 2degrees ). My 2degrees SIM card work on other phone, I have updated the phone via KIES and my IMEI is the same as the back of my phone.
PDA : I9100ZSMSA
Phone : I9100XXKG6
CSC : I9100ZSMSA
Android version : 4.1.2
Kernel : Siyah-s2-v6.0b5
Thanks
ANimonkeee said:
Hi,
Like the title say I have the 'not registered on network' when I try to make a call or send a text but the 3G is working fine. I have read a lot of threads, and try a lot of things without any success, that's why I am coming to you to get some help. I have a rooted Samsung Galaxy SII 9100, and I am located in New Zealand with 2degrees.I have tried 3 different SIM card in the phone and none of them were working ( Vodafone, Telecom, 2degrees ). My 2degrees SIM card work on other phone, I have updated the phone via KIES and my IMEI is the same as the back of my phone.
PDA : I9100ZSMSA
Phone : I9100XXKG6
CSC : I9100ZSMSA
Android version : 4.1.2
Kernel : Siyah-s2-v6.0b5
Thanks
Click to expand...
Click to collapse
Have a try at installing a different modem. There are xda links that contain many modems for the i9100. Try that first and if it doesn't work, we can assume that it is a rom issue.
Related
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
ProNewb said:
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
Click to expand...
Click to collapse
Check your APNs to see if they changed or got wiped out?
ctomgee said:
Check your APNs to see if they changed or got wiped out?
Click to expand...
Click to collapse
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2. I live in Rep. of Ireland.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
ProNewb said:
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Click to expand...
Click to collapse
sxi200 said:
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Click to expand...
Click to collapse
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
ctomgee said:
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
Click to expand...
Click to collapse
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
ProNewb said:
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
Click to expand...
Click to collapse
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
sxi200 said:
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
Click to expand...
Click to collapse
Well, i did go back and flash the jpkj2 2.3.5. and still no connection.
will try from an open place again later.
i have an issue with my internet connection too. i got an I9100(international version) and things were perfect till i switched to 4.0.3 and since then, my internet just refuses to connect although i have full signal strength and 3G or H displayed. but there is nothing going through.
it works again after i switch to airplane mode and back. i have no issues with wifi.
i have tried many modems and roms. i am currently using the KI4 rom and it still gives me issues.
please help.
update on situation
Hi guys,
just an update on my situation. Had the phone sent to Samsung twice for a check and bothe times it came back perfect with test sheets showing all was perfect. I decided to have another check done on the phone and it now says that the phone is blocked!! What the hell!. When i checked first weeks ago all was good and now it says it's blocked, but i'm getting 2g signal, surely i should be getting nothing if it's barred.
I have no idea who the origional service provider was of the phone, is there any way of finding out who the origional provider was or is there any way of removing this barring?
Thanks
Thanks to xda, i installed ICS succesfully on my Galaxy SII (originally UK Orange Mobile). But, the problem is that, in medium network coverage place, the mobile network doesn't work, message are sent/recieved easily but No phone call can be made. I installed ICS twice, once without wiping data, and later wiping data. But still, the problem is same. Please someone help me. My baseband version is
I9100XXLPQ, ANDROID VERSION 4.0.3, BUILD NUMBER IML74K.XXLPQ.
Thanks in advance. .
Try a different modem. You can download and flash them from rom manager if your rooted
Help me on choosing ROM
Can you please help Me on choosing perfect ROM for my mobile.
As i stated, IT's UK Orange Mobile, but now is used in Nepal (South Asia). On version information,
PDA is : I9100XXLPQ
PHONE : I9100XXLPQ
CSC : I91000XXLPD
I have rooted my mobile.
I'm using HyDrOG3NICS I think its great. You will have to try a few and make up your own mind though.
I have just bought a used O2 I9100P, O2 UK model.
When I connect with kies to update from GB 2.3.5 I get:
"your device does not support software upgrading via kies"
Anyone else had this problem?
My device is identified on Kies as... PDA:KJ4 PHONE:KI3 CSC:KJ2 (XXX)
On device info:
PDA : I9100PXXKJ4
PHONE : I9100PXXKI3
CSC : I9100PO2UKJ2
Further to this when I enter *2767*4387264636#
I get:
SELLOUT SMS
[1]Sellout SMS: OFF
[2]PCode:Not Active
[3]Moderod
I also have noticed the imei on about phone does not match the sticker inside the phone.
The phone seems to not be rooted. Could the previous owner have flashed a rom which changed the IMEI? I have no experience with rooting and flashing.
Any help with getting this phone back to stock GB or ICS and the correct IMEI would be greatly appreciated.
Sent from my GT-I9100P
Darius said:
I have just bought a used O2 I9100P, O2 UK model.
When I connect with kies to update from GB 2.3.5 I get:
"your device does not support software upgrading via kies"
Anyone else had this problem?
Thousands as per previous posts refrenced to firmare flashed on the phone non official .
My device is identified on Kies as... PDA:KJ4 PHONE:KI3 CSC:KJ2 (XXX)
On device info:
PDA : I9100PXXKJ4
PHONE : I9100PXXKI3
CSC : I9100PO2UKJ2
Thats an old O2 UK firmware .
I also have noticed the imei on about phone does not match the sticker inside the phone.
Phone should not work .
The phone seems to not be rooted. Could the previous owner have flashed a rom which changed the IMEI? I have no experience with rooting and flashing.
Any help with getting this phone back to stock GB or ICS and the correct IMEI would be greatly appreciated.
Firmware is probably not for P model and its rather old are you sure its P model .
IMEI probable service centre job .
Stock rom
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the reply and taking the time, the phone works perfectly and it is a Public model according to the about phone section, also it has nfc in settings and it works when I enable it.
Is your imei this one?
004999010640000
If so then you have my phone!
----------------------
GTI9100
HydrogenICS 12.05
fluxi xx.01_rc5
Take out the battery. The sticker on the backside of the phone should give you correct model no.
I have a I9100P and mine says that, on the sticker along with IMEI No & serial No.
Does the IMEI No match your phone," dial *#06#
Sent from my GT-I9100 using Tapatalk 2
bored_stupid said:
Take out the battery. The sticker on the backside of the phone should give you correct model no.
I have a I9100P and mine says that, on the sticker along with IMEI No & serial No.
Does the IMEI No match your phone," dial *#06#
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
The IMEI on the sticker inside the phone does not match the one that comes up when I dial *#06#
Also the IMEI appearing on screen is not the standard 004999010640000.
The one on screen ends 787 the one on the box ends 777.
Sound like your imei is corrupted.
Try this:-
http://forum.xda-developers.com/showthread.php?t=1264021
Hope it helps.
Sent from my GT-I9100 using Tapatalk 2
JJEgan said:
On device info:
PDA : I9100PXXKJ4
PHONE : I9100PXXKI3
CSC : I9100PO2UKJ2
Thats an old O2 UK firmware .
Firmware is probably not for P model and its rather old are you sure its P model .
jje
Click to expand...
Click to collapse
Just to follow up on this, The firmware is not old and is for the O2 P Model... found others with it on newer O2 NFC phones here:
http://forum.xda-developers.com/showpost.php?p=23878593&postcount=1
and here:
http://forum.xda-developers.com/showthread.php?p=25989432
If I flashed the official I9100P O2 ICS ROM using Odin, would my phone be fixed in terms of being able to recieve future updates from Kies or OTA?
Someone also had mentioned checking the boot display to see if I9100P or I9100 appears and it does appear as I9100P - see attached.
Thanks again.
If I flashed the official I9100P O2 ICS ROM using Odin, would my phone be fixed in terms of being able to recieve future updates from Kies or OTA?
Someone also had mentioned checking the boot display to see if I9100P or I9100 appears and it does appear as I9100P - see attached.
Thanks again.[/QUOTE]
yes you will be able to recieve updates from kies.
I have the Orange I9100P and yes thats what you get on the boot display, however if you flash the old bootloader, you will just get I9100 displayed instead. You will stll have all the NFC funtions though.
here is the 02 latest i9100p ICS firmware.
http://forum.xda-developers.com/showpost.php?p=26433044&postcount=11
Sent from my GT-I9100 using Tapatalk 2
Thanks for the link, I had been reading that thread and, I have went ahead and flashed ICS with Odin, it's working fine so far.
Hi Everyone,
I know there are a few thread around with the same purpose, but nothing helped me. I even did ping few members who claimed to have known the problem, to my bad, they are busy to reply me. So i thought i would start a new thread explaining my problem.
I got a new Galaxy GT I9300 Before 3months in Singapore, The shop is famous for selling smuggled phones, so i am not sure to which country mine belongs to. There was no network initially, so the shopkeeper offered his help, He gave the mobile to a nearby service centre and got it ready,
I am not sure what he did, but d phone had CWM and Super User. I already own a Galaxy S2 and i have done a lot of flashing Custom MOD's, So i wanted my Galaxy S3 to be original for a while. So i tried to restore by flashing a official firmware, To my surprise the phone didnt have any network in it after the ODIN flash. I tried an INDIAN firmware, then Singapore.
I tried CWM (which i am not a pro) but couldn get back the network. I went back to the service centre and he told some files are corrupted since i flashed the phone with official firmware.
He again flashed it, now the network works, voila ! I couldn figure out and he wouldn tel me. ****ing $40 !!! The phone had CWM and SuperUser installed in it again.
The phone had the following information after wat ever he did.
IMEI - 3531*********99 it is same in d board and in the phone information.
MODEL NUMBER - GTI9300
ANDROID VERSION - 4.0.4
BASEBAND VERSION - I9300DXLE9
KERNEL VERSION - 3.0.15-611327-USER SE [email protected] -71 #1SMP PREEMPT TUE MAY 22 21:54:17KST 2012
BUILD NUMBER - IMM76D.I9300XXALEF
NETWORK - SINGTEL
SERVICE STATE - IN SERVICE
MOBILE NETWORK STATE - DISCONNECTED
MY PHONE NUMBER - UNKNOWN
ERI VERSION - N/A
IMEI SV - 01
SERIAL NUMBER - 000000000000
DEVICE STATUS - MODIFIED
Can anyone please infer on what the service guy had done. so that i can update my phone to JB. I am sick and bored of the same firmware for over 4 months and i wanna change it. But i dont want to get struck in the same issue. Please help and advance thanks !
I am afraid you had bad luck
1. You should NEVER pay for stuff that does not work (and is not with original firmware).
2. You should also read this - it is almost certainly the same story (in your case SN 00000000 should also give a strong clue things are not what they should):
http://forum.xda-developers.com/showpost.php?p=34226179
3. Since whoever f***ed those things the first time on your phone did not make an efs image-backup you can never return to factory state!
4. You are basically stuck with a phone where you will have to apply a patched modem after each ROM upgrade.
when you say patched modem what do you mean.?
Patched modem ???
When u say patched modem, can u explain tat ? Is it possible to create one by ourself ?
xclub_101 said:
1. You should NEVER pay for stuff that does not work (and is not with original firmware).
2. You should also read this - it is almost certainly the same story (in your case SN 00000000 should also give a strong clue things are not what they should):
http://forum.xda-developers.com/showpost.php?p=34226179
3. Since whoever f***ed those things the first time on your phone did not make an efs image-backup you can never return to factory state!
4. You are basically stuck with a phone where you will have to apply a patched modem after each ROM upgrade.
Click to expand...
Click to collapse
Well ...
santhoshkcsk said:
When u say patched modem, can u explain tat ? Is it possible to create one by ourself ?
Click to expand...
Click to collapse
A patched modem apparently is modem code that does not check all the stuff in the efs partition (for instance when SN is 00..00) - I am currently using the one posted by ariza somewhere around. Patching one might be quite complex and for the moment I did not have the time to research that. The only problem that I see is that certain providers are said to be using very unusual modem code (since they have unusual settings in their own network) - and in that case you need to use a patched version of that specific modem version - but so far I have not seen that happening in a very repeatable way in posts from european networks.
The other problem is that when you install any full ROM (for instance 4.1.2) that will overwrite your modem - so you will have to re-install the old patched modem (so far ariza_v04.zip seems to work OK with 4.1.2 on my operator's network).
Serial no 000000...
Thousands of Thanks man, I have been facing the same problem from last few days after flashing cwm6 and UltraRom. hi can you please suggest me an modem for Samsung Galaxy s3 I9300 Indian version.
AP: I9300XXALE8
CP: I9300XXLE8
CSC: I9300DBTALE5
Hello Everyone,
I've tried searching for this issue in the forum, but nothing was close to what I was experiencing.
I have come across a used T-mobile galaxy s5 here in my country (Morocco), It's unlocked, but I don't know what kind of flashing operations this phone has undergone before falling into my hands.
The main issue is that the network connection is unstable, it drops every 15 minutes or so, and when I try to make calls I get the error message '' not registred to network "
The IMEI Number seems good, I'm running a stock t-mobile Rom (with all the software, and the t-mobile logo on boot) and I've update my firmware with samsung Kies. The issue is still there.
My main interrogation is what do I try now to make it work, it seems to me that the baseband needs to be patched or something like this to work with our local carrier (Itssalat al Maghrib) but I'm open to all of your suggestions.
Thank you very much for your help and time.
oussama.tali said:
Hello Everyone,
I've tried searching for this issue in the forum, but nothing was close to what I was experiencing.
I have come across a used T-mobile galaxy s5 here in my country (Morocco), It's unlocked, but I don't know what kind of flashing operations this phone has undergone before falling into my hands.
The main issue is that the network connection is unstable, it drops every 15 minutes or so, and when I try to make calls I get the error message '' not registred to network "
The IMEI Number seems good, I'm running a stock t-mobile Rom (with all the software, and the t-mobile logo on boot) and I've update my firmware with samsung Kies. The issue is still there.
My main interrogation is what do I try now to make it work, it seems to me that the baseband needs to be patched or something like this to work with our local carrier (Itssalat al Maghrib) but I'm open to all of your suggestions.
Thank you very much for your help and time.
Click to expand...
Click to collapse
What rom? I know stock rom, but what version? What modem? Need a little more info here....
AxAtAx said:
What rom? I know stock rom, but what version? What modem? Need a little more info here....
Click to expand...
Click to collapse
Product code : SM-G900FZKADTM
CSC CODE : DTM
Version number : LRX21T.G900FXXU1P0GC
Bootloader version : G900FXXU1P0GC
CSC version : G900FDTM1POG2
Baseband version : G900FXXU1POG1
Latest firmware : G900FXXU1POJ5/G900FDTM1POJ5/G900FXXU1BOJ1
Here are All the information I could gather about my phone, I think it's some kind of CSC issue. Also I've noticed that the IMEI I get in the device, is not the same i have behind the battery.
Thank you for your help