[q] XT910/safestrap 3.72/stock slot malfunction - Motorola Droid RAZR

Hi, i've faced the following issue:
Phone: RAZR XT910
Firmware: OTA ICS 4.0.4, 673.94.328.XT910.PSHAsiaRetail.en.03
Root
SS v.3.72
After installing SS, on first enter in SS was made full backup of stock ROM.
After that (have no idea why) reboot in stock slot caused animated M-logo loop.
Hard reboot allows to get in SS. Stock ROM backup was restored to slot 1 and booted successfully.
So the phone alive, but on slot 1, and stock slot seems to be unfunctional.
Tried to recover backup in stock slot, but it boots to the mentioned M-logo loop.
I want to get the stock slot back)
Should I try to reinstall SS (can mess slot 1 boot?), Or try stock recovery, or try to install custom ROM to the stock slot, or something else?
I would appreciate any advice.
Thanks..

eugene__o said:
Hi, i've faced the following issue:
Phone: RAZR XT910
Firmware: OTA ICS 4.0.4, 673.94.328.XT910.PSHAsiaRetail.en.03
Root
SS v.3.72
After installing SS, on first enter in SS was made full backup of stock ROM.
After that (have no idea why) reboot in stock slot caused animated M-logo loop.
Hard reboot allows to get in SS. Stock ROM backup was restored to slot 1 and booted successfully.
So the phone alive, but on slot 1, and stock slot seems to be unfunctional.
Tried to recover backup in stock slot, but it boots to the mentioned M-logo loop.
I want to get the stock slot back)
Should I try to reinstall SS (can mess slot 1 boot?), Or try stock recovery, or try to install custom ROM to the stock slot, or something else?
I would appreciate any advice.
Thanks..
Click to expand...
Click to collapse
I would recommend a clean slate. Flash to stock and start all over. Thats usually what I do.

desdecardo said:
I would recommend a clean slate. Flash to stock and start all over. Thats usually what I do.
Click to expand...
Click to collapse
Thanks for reply.
Do you mean flash using RSD lite?

eugene__o said:
Thanks for reply.
Do you mean flash using RSD lite?
Click to expand...
Click to collapse
Yes thats what to do. Anyway once you make a backup, create another slot and install a custom rom and use that slot

Thanks for reply. I think my problem is solved. I wiped stock rom slot and installed CN 11. It has booted successfully.

Related

RAZR XT910 cant run the stock

Hello everyone
That's my first message here and i'm a new user of android.
I installed CM9 rom on the stock using BBM and then I uninstalled the recovery, and installed SafeStrap 3.05 recovery in order to install D-Wiz on rom-slot. After installing it I couldnt open the stock. the stock is always stuck in the loading status ( with cat icon of CM9).
I installed SafeStrap and D-Wiz as it is mentioned in this forum but maybe (I dont remember correctly) I wiped cache, dalvik cache and factory reset of the stock.
D-Wiz rom works fine but I have this problem with the stock. If you think I'll have to wipe everything I dont have problem with that. I just want to have my stock working and that's all.
guys, if my english isn't understood so tell me and i'll fix it.
anyway I really need your help here.
AW: RAZR XT910 cant run the stock
When your Stock Rom is an CM9 based Rom you need BMM to boot it with 2nd-init. Your problem is, that you've uninstalled BMM and installed SS.
To boot your Stock System with Safestrap you have to run an Stock Rom or Stock based Custom Rom on it.
So Fastboot back to Stock by using RSD or try to uninstall SS and install BMM 0.3.2 while you're booted into your Rom Slot.
After this you should be able to boot your Stock System (CM9)
Charge your Battery and have your Fastboot Files ready, just in case it doesn't work.
Sent from my XT910
HSD-Pilot said:
When your Stock Rom is an CM9 based Rom you need BMM to boot it with 2nd-init. Your problem is, that you've uninstalled BMM and installed SS.
To boot your Stock System with Safestrap you have to run an Stock Rom or Stock based Custom Rom on it.
So Fastboot back to Stock by using RSD or try to uninstall SS and install BMM 0.3.2 while you're booted into your Rom Slot.
After this you should be able to boot your Stock System (CM9)
Charge your Battery and have your Fastboot Files ready, just in case it doesn't work.
Sent from my XT910
Click to expand...
Click to collapse
what are the fastboot files? please explain more clearly because i'm noob in this subject:crying:

[Q] Help with messed up XT910 MAXX

Hi friends,
Here's my situation, would be very happy if any of you can give me some advice on how to solve this.
1. My stock romslot can no longer boot. I also cannot restore Nandroid to it. Looks like /int is gone.
2. My 2nd romslot also won't boot DWiz JBX rom so I'm stuck with BBM
3. What I am trying to do is clean up stock romslot and 2nd romslot, then install retail China version on stock romslot and then maybe install a 2nd custom rom on system2 (2nd romslot). Haven't decided because it's so much trouble.
4. I've been using BMM all along. Didn't touch Fastboot, adb or Safestrap (in fact, I only know how to use BMM...)
Finally, any guide to restoring the whole phone back to the beginning? (unroot, restore kernel, rom etc)
Thanks!
atytse said:
Hi friends,
Here's my situation, would be very happy if any of you can give me some advice on how to solve this.
1. My stock romslot can no longer boot. I also cannot restore Nandroid to it. Looks like /int is gone.
2. My 2nd romslot also won't boot DWiz JBX rom so I'm stuck with BBM
3. What I am trying to do is clean up stock romslot and 2nd romslot, then install retail China version on stock romslot and then maybe install a 2nd custom rom on system2 (2nd romslot). Haven't decided because it's so much trouble.
4. I've been using BMM all along. Didn't touch Fastboot, adb or Safestrap (in fact, I only know how to use BMM...)
Finally, any guide to restoring the whole phone back to the beginning? (unroot, restore kernel, rom etc)
Thanks!
Click to expand...
Click to collapse
Use rsd lite to flash firmware and factory reset it in the stock recovery
Sent from my XT910 using xda premium

Razr xt910 boot problem

I need help asap.So,I was on ICS rooted and installed safestrap 3.05 and then updated to 3.73 but after update I had bootloop.But then performed factory reset and still the same but then accidentally I full wiped so now I cannot boot info safestrap nor rom!
I cann access fastboot.What should I do now?Thanks in advance
Well,I managed to bring my phone back to stock via original files.So after that,I rooted and installed newest safestrap.Then I entered recovery,created new rom slot and installed slimkat to that slot but now I am wondering where the hell is my stock rom!?When I activate stock slot and when I try to reboot it says that there is no rom installed,are you shure you want to reboot?I never wiped anything on stock slot so my question is: is this normal?Should stock rom be there so I can boot in it or it is gone forever??

How to install stock rom after root & safestrap

Hello All,
I rooted and installed safestrap. Then took a backup, installed open_gapps. I can not access my OS, as it's stuck in language selection screen in Google Wizard.
Is there anyway to roll back and install the stock rom again.
Thank you
Which Safestrap version do you have installed? Can you still access Safestrap recovery? Do you have the backup on the HDX?
If you have a backup of the stock slot, you should be able to restore it. Note that you MUST NOT restore a backup of a secondary slot to the stock slot! Would brick the device.
And don't wipe system in Safestrap, especially if you use Safestrap v3.7x!
mohzean said:
Hello All,
I rooted and installed safestrap. Then took a backup, installed open_gapps. I can not access my OS, as it's stuck in language selection screen in Google Wizard.
Is there anyway to roll back and install the stock rom again.
Click to expand...
Click to collapse
Cl4ncy said:
Which Safestrap version do you have installed? Can you still access Safestrap recovery? Do you have the backup on the HDX?
If you have a backup of the stock slot, you should be able to restore it. Note that you MUST NOT restore a backup of a secondary slot to the stock slot! Would brick the device.
And don't wipe system in Safestrap, especially if you use Safestrap v3.7x!
Click to expand...
Click to collapse
Resolved in this tread, posts 374-392.

Bricked from BMM

Hello all,
I need some help with this old phone. It's been sitting in a drawer for a while, and I haven't touched it for like a year at least. Apparently back then I had dual-booted stock and another ROM using BMM (Bootmenu Manager). Well now I need to use it and I thought the best thing to do would be fastboot flash the stock ROM, so I did that from the bootloader and it didn't change anything. So I went into BMM and deleted the second ROM (in slot 3), then did a factory reset on the stock ROM through fastboot.
Now I can't get any slots to work besides stock, and the stock ROM has zero bytes available for user data. meaning I can't install the BMM app to remove BMM.
When trying to use another slot, I can create the virtual partitions, but after a reboot it can't find them anymore...

Categories

Resources