I'm member of AOKP team and I decided to share my personal builds of AOKP ROM called AOKPK.
AOKPK is unofficial AOKP ROM compiled with KECI-SM 4.8.4 toolchain (thanks to Paul Beeler and Chet Kener) and with some other stuff.
This ROM was created for my personal needs. If you don't like some major part of it, don't ask to change, just use official AOKP builds. But, If you have some tips for minor patches and features, you can ask for it. Just attach link to github/gerrit.
AOKPK uses my fork of franco.Kernel with latest linux patches and O3 optimized.
So, what is inside?
So, what is inside?
All official features from AOKP (https://github.com/AOKP, http://gerrit.sudoservers.com/#/q/status:merged,n,z)
Compiled using KECI-SM 4.8.4 toolchain (https://github.com/kecinzer/GCC-UBER)
Included forked franco.Kernel (https://github.com/kecinzer/francoKernel_OPO) in-line builded with some added stuff
Removed AOSP Calendar
Removed Camera2 & Gallery2 and replaced with CameraNext & GalleryNext
ART compatible
Many usefull cherry picks from AOKP gerrit (http://gerrit.sudoservers.com/#/q/status:open,n,z)
I compile ROM at daily basis so consider it as daily builds.
All builds are available on romhive (http://this-is.romhive.com).
I recommand TWRP Recovery and ROM Installer.
Please don't ask about changelog, because I adding cherry picks often and it's very hard to keep trail with it. But I'll try to make changelog for "stable" builds.
And please don't expect much of support, because as it's been told - this ROM is primary dedicated for my own needs.
Gapps
I use PA-pico (it's also on provided web page).
If you like my builds you can buy me a beer by "Donate to me" button .
Donations
kjax - $25
mrbackdoor - $25
brandon fry - $20
tehSecret - $20
Gustave17 - $15
hazopoulis - $6
Thank you!
XDA:DevDB Information
AOKPK, ROM for the ONEPLUS ONE
Contributors
kecinzer
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOKP
Version Information
Status: Nightly
Created 2014-09-23
Last Updated 2014-09-23
Very nice, lets give it a go!
Always happy to see new ROM for bacon!
Having a nice dual boot environment with Robbie's Slim and this ROM. Thanks for your work!
I was wondering when you'd show up with a thread! Loved your rom on Hammerhead, and was looking at your Bacon folder on goo. Thanks for making these available!
Thank you for support guys, I will make download page also available in english (when I have some time ).
i give it a try
---------- Post added at 11:14 PM ---------- Previous post was at 11:09 PM ----------
is it possible to copy the softkey-features like longpress action on menu will show up the app-processes to the hardwarekey-features inside the aosp rom settings?
Hey Bro.You are the man!!!:good:
EasyGoingXD said:
i give it a try
---------- Post added at 11:14 PM ---------- Previous post was at 11:09 PM ----------
is it possible to copy the softkey-features like longpress action on menu will show up the app-processes to the hardwarekey-features inside the aosp rom settings?
Click to expand...
Click to collapse
Can you please be more specific? All custom features (most of them) are supposed to be in Rom Control, I don't want to move any settings to Stock android settings.
Awesome, will check it out.
kecinzer said:
Can you please be more specific? All custom features (most of them) are supposed to be in Rom Control, I don't want to move any settings to Stock android settings.
Click to expand...
Click to collapse
When you open up your Settings at:
Settings/ROM Controll/Navigation Bar/(and lets say...doesnt really mather)Home/Longe Action
There you can see that there are many actions what you can choose.
Same thing is at Mahdi Rom. He has ton of Action-Key-Features in his Rom.
Now my question....is it possible that you maybe copy all the Key-Action-Settings from Mahdi Rom into the Hardware-Key-Actions?:
Settings/ROM Controll/Hardwarekeys/
Because there are missing many great features what i do miss from Mahdi Rom...if its possible and i know that you might not be reactive to my wishes but it would be a cool feature in your Rom
Ah, you mean add more actions or possibilities into HW buttons righ?
May be I look at it, by honestly I don't use this so much.
kecinzer said:
Ah, you mean add more actions or possibilities into HW buttons righ?
May be I look at it, by honestly I don't use this so much.
Click to expand...
Click to collapse
More actions would be cool, but I found a bug.. I had recents panel set to long press home, but it wouldn't open, double tap (didn't change it from long press yet) opened the recents...
Sent from my One using XDA Premium 4 mobile app
This is daily builds?
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Hi everyone.
I'm experimenting in last days with F2FS and make ROM usable on both ext4/f2fs FS and I succeeded .
You can expect new build that will be compatible with both settings of /system, /data, /cache - if you have format it as ext4, it will use and installs as ext4, but if you have it on F2FS, installer will install and use it as F2FS.
Please be patient to upload new build - I have problems with connection to my hosting, but working to fix it.
New build is up from yesterday. Any responses?
would be possible to add more date formatting (on clock) ? (as on liquidsmooth, carbonrom, slim...)
thanks!
BHH
It can be possible, but I'm afraid that I will never use it .
kecinzer said:
New build is up from yesterday. Any responses?
Click to expand...
Click to collapse
NiceJob! Working great.I looked around is there an option to enable sound alert when connected to usb or charger?I know you dont take request on things if you wont personally use it -but,would you consider maybe adding an option to chooses custom recents such as slim recents?
Related
Attention Stock-based ROM users (Androwook, Energy, CleanROM, etc): You must downgrade from the 4.2.1 bootloader, otherwise this ROM will not work. This ROM requires the 4.1.1 bootloader.
Also, please read this entire post as well as post three if you plan to use Data2SD.
Finally, this ROM requires either my modified TWRP or namidairo's modified CWM Recovery. If you are already running kitkat based ROMs, you're fine.
ParanoidAndroid 4.5-BETA2
Current Stable Version: pa_tf201-4.5-BETA2-20140814And now, making it's long overdue debut on XDA... ParanoidAndroid for the TF201.
See post 2 for changelog..
Note: Data Wipe is required if coming from another ROM or PA version 3.99-RC2 or earlier. If you've been using the PA4.x beta versions, you *should* be okay, but try a data wipe if you have any FC's.
Data2SD mod now available. See installation instructions. See post three, "If you plan to use Data2SD" for formatting instructions and other notes.
Main Features:
1.Per-app DPI, layout, and color settings (configurable from Hybrid properties in Settings).
2.PIE, a new UI for Expanded Desktop (Immersive) mode. Drag your finger from the bottom of the screen while in expanded desktop mode to use it.
3.HOVER, a multi-tasking feature that opens apps in a floating window without closing your current app.
3.CyanogenMod's new theme engine
Starting with PA 4.x, the PA team have decided to re-write a lot of their core features from scratch, so some of the features above are missing.
Before flashing, make sure you are using Jellybean Bootloader version 4.1.1 and a compatible recovery, otherwise this ROM will not work. Stock-based ROM users must downgrade from the 4.2.1 bootloader. Also, this ROM requires either my modified TWRP or namidairo's modified CWM Recovery.
Installation Instructions:
1.Download the latest ROM from here.
-Optional Downloads:
Data2SD, framework-res.apk, ad OC kernels can be downloaded here.
Note: The latest ROM's, kernels and framework-res.apk's can also be found in the Downloads section at the top of the page.
2.Download pa gapps from here. Use the micro modular package.
3.Reboot to recovery. Make sure you are using either my modded TWRP or namidairo's modded CWM recovery. Stock-based ROM users: flash downgrade zip before proceeding beyond this point. Follow the instructions provided within the thread of whichever ROM you are using (Androwook, Energy, CleanROM, etc). You will then need to update to a later recovery version.
4.Nandroid (just in case).
5.Wipe Data/Factory Reset and wipe System if coming from a different ROM or PA version 3.99-RC2 or earlier. If you are already running PA 4.x, then no data wipe is necessary.
6.Wipe Cache/Dalvik Cache (Recommended regardless).
7.Flash the ROM and gapps (If you plan to use Data2SD, proceed to post three for additional information and instructions at this point).
8.Reboot.
Known Issues:
1. The Dock battery doesn't show up on the status bar
2. GPS is still broken
3. Multi-user is broken (causes bootloops).
4. Most likely other little things.
If anyone finds any bugs, don't send a bug report to the ParanoidAndroid Team, report them here since this is an unofficial build. I don't have any other testers, so there may be bugs I've missed/never encountered.
The team often posts status updates on their Google+ page. Check here for news/status updates.
Check here for the ParanoidAndroid changelog for official builds. I'll post any significant changes I make in post two.
Obligatory Disclaimer: I, nor the ParanoidAndroid team are responsible if this messes up your device. Also, I am not affiliated with the ParanoidAndroid team in any way. I built this for my own use and thought others might like it.
Credits, Thanks, and Sources:
The ParanoidAndroid Team for the ROM. Source.
Namidairo for the initial device tree, kernel, and vendor files.
The CyanogenMod Team for a few files.
Mistar Muffin for the Data2SD enhancements.
Device tree and kernel source can be found here.
XDA:DevDB Information
[ROM][UNOFFICIAL] ParanoidAndroid 4.5-BETA2 8/14/2014, ROM for the Asus Eee Pad Transformer Prime
Contributors
Voyager2k
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.5-BETA2
Stable Release Date: 2014-08-14
Beta Release Date: 2014-08-14
Created 2014-01-28
Last Updated 2014-10-12
Major Changes/Tweaks:
See my github page and the ParanoidAndroid github page for exact changes.
2/28/2013
Fixed SystemUI crash caused by adding certain tiles to the quick settings panel.
3/7/2013
Superuser is integrated into the ROM (SuperSU app is no longer needed). Accessed via Settings.
Circle Battery icon from CyanogenMod has been added.
HW Overlays are automatically disabled when PIE is active (fixes transparency and app sizing issues)
Reverted most SystemUI icons back to MDPI. Quick settings icons are still HDPI since the MDPI set is still causing FC's.
Removed 60 FPS cap in performance mode (my fault for accidentally setting it in the first place. Thought it was uncapped until I double checked).
3/11/2013
Added Performance Settings from CyanogenMod.
Fixed a string in PIE Settings. Trigger area no longer marks two options as default.
Added UK Keyboard layout.
3/25/2013
Updated to 3.15
_motley's OC kernel now included. (Per _motley's request, here's a link to his thread)
PA Prefs has been updated. Hybrid Properties can be accessed from the quick settings menu.
I've added the notification sounds from CyanogenMod. If they don't show up, go to Settings -> Apps -> All and clear the data for Settings.
3/27/2013
Found a fix for Quick Settings tiles not rearranging properly.
Bluetooth keyboards now work.
Available space for MicroSD card now appears in Settings -> Storage.
3/29/2013
Added a version of the ROM with the stock kernel since some 64GB models don't seem to like the OC kernel included.
4/08/2013
Ported "Long press back button to kill app" feature from CyanogenMod.
Fixed Settings FC caused by trying to change the USB connection type.
5/03/2013
Added goo.im OTA update support.
Reverted to stock kernel to keep OTA updates simple.
5/13/2013
Fixed a couple of bugs that found their way back in.
Added the cLock widget from Cyanogenmod (per Zasuk's suggestion)
Enabled read-only support for NTFS file systems. If you want to overclock, download and flash the updated OC Kernel.
6/11/2013
updated to version 3.60
HALO
dock battery icon styles
6/21/2013
Fix Hybrid properties not applying (My fault. Messed with something I shouldn't have).
Added Hotplug CPU Governor.
Added option to turn HALO off entirely (this may or may not stay, as I think the team have already taken it out of the main branch).
6/22/2013
Fix SD Cards not mounting.
7/16/2013
Update to 3.68
Option to change the size of HALO.
Various fixes. See PA's Google+ page for changes.
7/17/2013
Fixed menu icon not showing up in some apps.
7/27/2013
Update to 3.69
Built using official CyanogenMod device tree, with additional fixes.
Added full R/W support for NTFS and exFat file systems, courtesy of CyanogenMod.
Added discard option to fstab. Let's see if this helps or hurts performance.
10/29/2013
Update to 3.99-RC2
Update Android to 4.3.1
Added controls for CRT Animation. Still needs a little work, I think.
Advanced Settings got removed (again!) I'll re-add it in the next build.
11/11/2013
Re-added advanced settings and performance control.
Re-added cLock.
Fixed mass FC's caused by setting up a new user.
Added center clock and custom date display options for the status bar (Un-tested in TabletUI).
Added "Never" as a screen timeout option.
Switched over to HDPI icon set. Status bar icons no longer fill in completely when setting custom colors in PA Prefs (except for the dock battery icon).
12/15/2013
Switch to CyanogenMod performance settings.
Add Battery Bar.
Add Battery Icon styles.
Fixed Buletooth Tethering.
Added lulzactive and pegasusq CPU governors.
Added VR, BFQ, and SIO I/O schedulers.
Added a few tweaks from craigacgomez's old JB kernel.
Fix a few minor bugs in setings.
5/14/2014
After a long time in beta, updated to PA 4.3
ROM is now kitkat based (Android 4.4.2)
Lots of main features removed pending rewrites, i.e. Hybrid engine, HALO (soon to be Hover).
Battery Bar and additional Battery Icon styles, as well as clock styles and other little changes I've made have been removed due to major code rebase.
6/07/2014
Update to PA 4.4 BETA1
Update Android to 4.4.3
The theme engine from CyanogenMod has been ported over
Fixed Settings FC caused by trying to access Superuser menu
6/12/2014
Update to PA 4.4 RC1
Fix the data mounting issue some users were reporting
6/29/2014
Update PA to 4.4
Update Android to 4.4.4
HOVER has been added
7/22/2014
Update PA to 4.43
Added some changes from Namidairo's kernel
Power button and battery icon bugs seem to be fixed
8/14/2014
Update PA to 4.5-BETA2
Fixed Lightbulb app. Now uses camera LED as a flashlight like it should
Fixed App Privacy FC
Fixed inability to unmount SD Cards
Added a Dalvik memory tweak from the TF700
Data2SD Information and Archive Download Links
If you plan to use Data2SD:
Make sure your microSD card has two partitions, both set to Primary (or boot in linux). The first can be whatever you like, but the second must be ext4. I would recommend using at least 6GB minimum for the second partition since this is where all of your apps and internet downloads will go. Starting with PA 4.x, I'm introducing an Enhanced Data2SD kernel. This version will allow any app to read from and write to the internal storage, whether or not it has root access. Unfortunately, this version needs to be flashed in two files. One is the kernel, the other is a modified frameworks-res.apk. For the kernel, just download the latest version; it will work on any build. The frameworks-res.apk however, must be matched to the specific ROM version. The filenames for the ROM and framework zips include build dates. Make sure these match. For Data2SD, use the files marked "Data2SD". To revert, use the files marked "Stock". Download links can be found in post one.
To install:
1. Follow all the installation steps from post one up to and including step seven.
2. After you flash the ROM + Gapps, reboot, let the progress bar fill, then reboot back into recovery.
3. Flash the Data2SD kernel.
4. Flash the modified framework-res.apk.
5. Reboot and proceed as normal.
If you get an "Encryption Unsuccessful" error within android (it's hard to miss), it means you didn't format your microSD card correctly. Make sure both partitions are set to primary (or that the boot flag is checked in linux) and that the second partition is ext4. Also, make sure the partitions aren't part of an extended partition. They must be separate or you will get this error.
Archived Downloads:
ROMs
Kernels
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10 [UNOFFICIAL] 2/27/2013
Nice! Downloading now
Sent from my Transformer!
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10 [UNOFFICIAL] 2/27/2013
Nice to see that you got that post count up
Sent from my SGNote
so i use PA 3.0 on my phone, and my rom dev had us download a special PA-GAPPS. but this one just call for the standard cm10 ones. just wondering why that might be? i just figured it was cause PA was its own special deal lol
grats!
Couple of hours on this ROM, I would say it's a very smooth indeed. Minor bug on 'Custom Tiles', you can't add or delete additional tiles.
Gonna stay with this ROM for a while as I like PA on a tablet. Thanks Voyager2k !
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10 [UNOFFICIAL] 2/27/2013
Both adding and deleting tiles has been working for me, has been working since the latest version few days ago
Sent from my SGNote
how is it running, as compared to the CM 10.1 ports?? might have to give a flash...
Makrilli said:
Both adding and deleting tiles has been working for me, has been working since the latest version few days ago
Sent from my SGNote
Click to expand...
Click to collapse
Yes you're right, they can be deleted. But 'systemui' FC when I tried to add GPS. Anyway, maybe just me had too much to drink lol.
plutozz said:
Yes you're right, they can be deleted. But 'systemui' FC when I tried to add GPS. Anyway, maybe just me had too much to drink lol.
Click to expand...
Click to collapse
Found the problem. For some reason the MDPI icon set is incomplete, so the SystemUI couldn't load the proper icons. I've switched over to the HDPI icon set and it seems to be working fine. Icons are a little bigger, but personally, I kind of like it. I'll have a new build uploaded shortly.
Edit: Build is now live. Let me know if this fixes it for you.
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10r1 [UNOFFICIAL] 2/28/2013
Wonderful build. Flashed it with motleys kernel and this literally brought back life to my prime lol. I love PA. FYI pie is still a little borked. The snap points don't work as well as access to the notifications thru pie. No problem tho. Still lovin it. Thanks.
Sent from my Nexus 4 using xda premium
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10r1 [UNOFFICIAL] 2/28/2013
Both are working for me. Try this: drag your finger to the right, just past the solid arc to view notifications, or left, just past the dotted arc for the quick settings panel. For snap points, you need to drag your finger over to one of the + symbols and leave it there until PIE closes.
Sent from my Transformer Prime using XDA Premium HD app
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10r1 [UNOFFICIAL] 2/28/2013
Voyager posted on the earlier thread that if you set navbar size to 0% you can have both pie and statusbar
Sent from my SGNote
Voyager2k said:
Found the problem. For some reason the MDPI icon set is incomplete, so the SystemUI couldn't load the proper icons. I've switched over to the HDPI icon set and it seems to be working fine. Icons are a little bigger, but personally, I kind of like it. I'll have a new build uploaded shortly.
Edit: Build is now live. Let me know if this fixes it for you.
Click to expand...
Click to collapse
Dpwnloaded latest build and installed. SystemUI FC is FIXED on latest build. Thank you Voyager2k !
Installed last night with PA gapps. Had an issue with the play store at first, wouldnt sync. Had to delete and readd my google account, then it worked.
Also... i cant get PIE to work at all. I have turned off the dock... i have a tablet not a phone. Do i need dock on to have the pie feature?
Other than that, speedy and stable after letting it sit and cache for an hour or so.
Something i noticed though, id been running jellybeer previously, and whenever i did a jellybeer reinstall, it auto downloaded all my play store apps from the last build. I thought that was really cool. PA doesnt seem to do that, where is that feature from?
Good, but you have to fix color choosing in PA Settings and also fix clock widget on the lockscreen
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10r1 [UNOFFICIAL] 2/28/2013
Working great, even colour settings is working on my one. Just only had issues with theme changer, kept crashing even though I didn't even change anything. So I removed it and now it's good.
Great work!
Sent from my GT-N7100 using Tapatalk 2
Re: [ROM][JB Bootloader] ParanoidAndroid 3.10r1 [UNOFFICIAL] 2/28/2013
Super cool thanks brotha!
Sent from my Transformer Prime TF201 using xda premium
Disclaimer: SlimRoms and I are not responsible for any damages to your device.
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems. The entire project straight from Android Open Source Project (AOSP) source code. All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
Note
Since this is Beta build Bugs are bound to Happen.
SlimLP is the project name for SlimRoms based on Android 5.1.1 Lollipop and offers the following original features:
Original Features
RRO Layers Support
Doze (ambient display) timeout (selected devices only)
Options for battery icon and text
And many more
Unofficial Features
Android security patches to 2015-12-17
ToDo
Add music player
Installation Instructions
Download and install the latest TWRP recovery from here.
WIPE (Factory Reset)
Download and install the unofficial ROM through here. (md5sum: 3948aae6825bbbd86b46b9dce4eab5c4)
Download and install the latest GApps packages from this thread. (make sure you download 5.1)
XDAevDB Information
Unofficial SlimLP Nexus 7 2012 WiFi (grouper)
Contributors
ezbncs
Source Code: https://github.com/SlimRoms/
Credits
ezbncs (unofficial releases)
dexter93 (maintains the official releases)
Team SlimROM
ROM OS Version: 5.1.1 Lollipop
ROM Kernel: Linux 3.1.10 Slim_Grouper_1.1+
Based On: AOSP
Version Information
Status: Beta
Created 2015-12-17
Last Updated 2015-12-17
future stuff
last one
Looks coolio! Is there ALLF2FS support?
It has F2FS support but I have not tested it out yet.
Oh ok. I might try it later! ^^
KawaiiAurora said:
Oh ok. I might try it later! ^^
Click to expand...
Click to collapse
Tell me how it goes thank you and good luck.
It works just fine! I used your ROM, Opengapps pico and M kernel! My /data parition didn't get corrupted after reboot either (happened with other LP roms :/). Feels very fast! My only request is that you add the AOSP Lolipop Music player. Apart from that, awesome ROM! Very happy
KawaiiAurora said:
It works just fine! I used your ROM, Opengapps pico and M kernel! My /data parition didn't get corrupted after reboot either (happened with other LP roms :/). Feels very fast! My only request is that you add the AOSP Lolipop Music player. Apart from that, awesome ROM! Very happy
Click to expand...
Click to collapse
I will work on adding the music player in a future update glad it worked for you.
Layers also works perfectly! Playing music while installing apps and browsing is also flawless. I like the lower DPI (things are smaller so screen seems bigger) like other Slimroms. Amazing ROM. The browser is also very fast.
yea, works great thanks for that! will give more feedback in the next days (if neccessary).
Will there be a SlimMarsh update?
for those more experimental guys, the plain kernel of desolation rom also works on this rom. you can grab it here
KawaiiAurora said:
Will there be a SlimMarsh update?
Click to expand...
Click to collapse
I doubt there will be a slimmarsh update but it is something im looking into.
Great rom!! Any chance we could get an update with the Nexus security patches?
mh1983 said:
Great rom!! Any chance we could get an update with the Nexus security patches?
Click to expand...
Click to collapse
Glad you liked the rom, and an update should be coming soon.
Custom OxygenOS OneplusX - COSX ROM
Intro
First of, I'm not a developer. I'm just a guy who put a couple of things together. I'm a bit above noob-level, so dont excpect high end stuff like some prestigious developers. That being said, I have put this ROM together because of the lack of ROMS based on our original software for the OneplusX. Don't expect to much, the most things happen under the hood. So no shiny backgrounds or boot screens.
Disclaimer
You know the drill, flashing happens under own responsibility. I have tested everything on two devices, and will not put anything online that can possibily harm or damage our device in any way. This being said, if you need support, ask in this thread.
Open Source
The ROM i have created is for the community, which in my opinion also means it should be fully open source. You can edit everything you want. You can use it as base for whatever you like. No need to ask permission or give reference. Seeing the amount of customized original software, I would be happy to see more custom oos roms pop up. No need to put restrictions on anything. Please just don't bother me with antutu benchmark related complaints.
ROM
Now lets talk business
ROM details:
Android 5.1.1
Based on OxygenOS 2.2.X
Boeffla kernel 4.0
Pre-Rooted (SuperSU)
Xposed framework
Pre-installed Busybox
Deodexed
Theming support
Zipaligned
Removed software rendering
Heavliy debloated & super slim
Replaced some Google Apps with oneplus Apps
Snapdragon camera (compatible with custom HAL from SultanXDA)
Init.d script support
Some RAM, System and battery tweaks
Updated system Apps
Custom Hardware keys remap
perhaps more, cant remember everything
Instructions
1 Obtain Root access and Custom Recovery
2 Download zip file from link
3 Boot into recovery
4 Install zip from sdcard
5 Wipe data and cache
6 Reboot phone
7 Wait for system deodexing (+/- 10 min)
8 Restart phone again
Download
Link will be provided later on
Thanks
- Thanks to everyone buying this phone and making the community what it is today
- Thanks to everyone in the past learning me how to soup a rom together
- Special thanks to Boeffla for providing his kernel and support of integration in this ROM
- If I forgot someone, Thank-you:good:
XDA:DevDB Information
COSX ROM, ROM for the OnePlus X
Contributors
winesh
ROM OS Version: 5.1.x Lollipop
Based On: OxygenOS
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2016-04-04
Created 2016-04-04
Last Updated 2016-04-03
Notifications
- Link will follow in the evening
Changelog
-x-
What's next
- This is version V1. If you have wishes or requests for a future version, please reply. I will see if i can add it in version V2 or upcoming versions.
- Everything is confirmed working. If you by any chance run into bugs, please report them.
So what's different about this rom than stock OOS? I'd give this a shot!
Interesting, I am waiting for the download link and changelog / feature list to give it a go.
Finished compiling, link will be axailable within couple of hours.
@joey24z1 for difference see rom details
@batam for feature list see rom details
Deodexed
Click to expand...
Click to collapse
Could you please explain this to me ? I tried google but can't find what is it, and its benefits. Thank you !
By theming support you mean layers? Or what..?
namquang93 said:
Could you please explain this to me ? I tried google but can't find what is it, and its benefits. Thank you !
Click to expand...
Click to collapse
http://codeversed.com/deodexed-vs-odexed-rom/
Hi. @winesh...
I think placeholder threads are not allowed as per the rules...
However, thanks for your contribution ..looking for download link ASAP
Sent from my ONE E1003 using Tapatalk
I think OP managed to put most of the tweaks one can do to the Stock OOS and created a zip flash package.
IIRC, I did pretty much similar things on my Stock OOS before moving over to CM13.
Good Job OP saving a lot of time for those who want to enjoy the stock experience.
Coud you post a benchmark test?
solidwave643 said:
Coud you post a benchmark test?
Click to expand...
Click to collapse
Did you read the op? Flash the rom and run the test yourself....
Get the link..
winesh said:
ROM details:
Android 5.1.1
Based on OxygenOS 2.2.X
Boeffla kernel 4.0
Pre-Rooted (SuperSU)
Xposed framework
Pre-installed Busybox
Deodexed
Theming support
Zipaligned
Removed software rendering
Heavliy debloated & super slim
Replaced some Google Apps with oneplus Apps
Snapdragon camera (compatible with custom HAL from SultanXDA)
Init.d script support
Some RAM, System and battery tweaks
Updated system Apps
Custom Hardware keys remap
Click to expand...
Click to collapse
Good work :good: Might try this as I kinda liked OOS but I'm currently running Marshmallow and CM based crDroid, so also might not go back to Lollipop
Biggest issues I had with the stock OOS 2.2.0 were:
1. Camera in low light situations. I think it's fixed here with Snapdragon camera?
2. Random rebooting, sometimes few times a day, sometimes few days without. Mostly occurred when playing any game with stock ROM. Is this custom OOS more stable?
3. I could not assign Menu action to HW buttons e.g. long pressing and this led to situation where I had to install Xposed framework and some module to get Menu in Titanium Backup to change backup location to SD card. Is this fixed here with Custom Hardware keys remap?
I know I should test this ROM myself, just pointing out biggest issues I had with stock OOS.
can u include the stock camera which has manual focus, exposure and iso??? or atleast let me know can i implement the stock oos camera in ur rom cheers
coolasnju1993 said:
can u include the stock camera which has manual focus, exposure and iso??? or atleast let me know can i implement the stock oos camera in ur rom cheers
Click to expand...
Click to collapse
Same request here. :fingers-crossed:
Thanks for your work!
So proximity wake up ambient display works in this rom ?
And what type of themes are supported ? Layers or CM ?
Theme support
So OP, You have provided Layers or CM theme engine into rom?
Though Layers supported Stock OOS 2.2.0(Partially not all the themes were working) .
anshu goel said:
http://codeversed.com/deodexed-vs-odexed-rom/
Click to expand...
Click to collapse
I said that deodexed is slower than odex rom. So that means this rom is slower than original OOS right ? Please correct me if I'm wrong.
Waiting for download link...
Will give a shot today...
SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim9 is the project name for SlimRoms based on Android 9.0.0 Pie and offers the following original features:
TBC
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
Downloads - Slimify your device!
Installation instructions - Follow these steps if you want SlimRoms on your device.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Kernel Source - ocn kernel source.
Get in touch! - You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms u11, ROM for the HTC U11
Contributors
Flinny, Slimroms
Source Code: https://github.com/slimroms/device_htc_ocn
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Slimroms
Version Information
Status: Testing
Created 2018-10-16
Last Updated 2018-10-27
How to install.
You're likely to have to fully wipe and fully format the data partition again.
I have been using Open Gapps for testing (ARM64 pico variant)
If you don't follow the above I can't help you
What works
All of the main stuff.
Calls
Camera
GPS
Bluetooth
Wifi
NFC
What's still to do.
It's basically AOSP at the moment, there are no real customisations yet, they will come... but no ETA!
Gestures/Squeeze etc see above.
What doesn't work?
Probably lots of things I don't use... You tell me...
Changelog
Alpha 1
* Initial Release
Alpha 2
* Audio fixes
* USB tethering should work
* Started working over sepolicy
Alpha 3
* November security patch
* Selinux enforcing
* Probably other stuff...
Alpha 4
* December security patch
* fixed a couple of sepolicy denials (thanks The_Walking_Playground,ValKyre for testing)
Alpha 5
* Tweaked the auto brightness settigns (quicksettings bar should behave now)
* Disabled Interaction boost for now, there were some strange times it was sticking.
Alpha 6
Re-enabled interaction boost
Advanced reboot menu.
Alpha 7
January security patch
Switched to Tomascus's new kernel (non-EAS version)
Merged a big chunk of Tomascus's device tree changes. (see Here)
Alpha 8 *READ CAREFULLY*
Time has been short recently, so other than merging in the March security update basically all of the device updates and kernel updates are from Tomascus (unofficial lineage builds)
I had a strange issue dirty flashing this myself, It had been flashed over a couple of hundred times in testing... all of the settings categories were all jumbled up, no amount of clearing cache/deleting app data seemed to fix it. A clean flash did. It may have only been me, just be aware.
March security patch
Switched to Tomascus's EAS Kernel
Device tree updated with many of Tomascus's changes
Alpha 9
April security updates
Synced more stuff from Tomascus/updated kernel to latest see device tree etc.
Not sure if the settings issue going between alpha 6->7 is still there as I ended up wiping.
Downloads
Alpha 4
Alpha 5
Alpha 6
Alpha 7
Alpha 8
Alpha 9
I'm running this, but obviously, use at your own risk... (I still recommend a backup before flashing new versions)
I’ll use this post to note the reported bugs.
It helps when reporting bugs to follow the Bug Reporting steps:
https://slimroms.org/#/support/report-bugs
Make sure you have properly installed ADB
Plug your device to your Computer
Open up a command prompt on your Computer
Type the following (without the quotes): “adb logcat -d > logcat.txt”
Click to expand...
Click to collapse
Either attach it to your post or report it via the above link.
1. Android Auto – Blank screen when unlocking. No audio. Possibly relates to reported issues with Google Play Services and seems to relate to Android P, not this specific build. Fix is said to be incoming.
2. Issues with SIM2 – Flinny only has a single sim device. Please report these issues with logcat so they can be looked into.
3. Brightness slider – Works from 50-100% Under 50 shows no difference. Can confirm this, but at 50% it is at its lowest.
4. OK Google – For me, and many others obviously, OK google does not work or is grayed out. I flashed this https://androidfilehost.com/?fid=385035244224414620 in TWRP and it is back to working.
5. 3.5mm adapter – It appears it may be a kernel issue and is being looked into. Works a few times then requires reboot to fix.
6. Random reboots – I have just noticed that if adaptive brightness is turned off, it will freeze randomly. Sometimes its within minutes, sometimes an hour. Ill gather a log or two when I can.
7. Audio issues - Seems to be a codec issue. I use vlc without issue. Seems streaming services work fine.
miffymiffy said:
Different to what you sent me?
Click to expand...
Click to collapse
yes....
Great news flinny thx
But I can't seen to find pie ROM link ?
Link in second post don't seem to work?
spoonymoon said:
Great news flinny thx
But I can't seen to find pie ROM link ?
Click to expand...
Click to collapse
Needed a quick rebuild to change one last thing... the link will be in the 2nd post once I've tested it.
A build is up, see the 2nd post.
Works great, you are the best thanks
All the previous issues are fixed! Good job mate. I've been running it for a week and have not found anything rom related wrong. I am dual sim too.
miffymiffy said:
All the previous issues are fixed! Good job mate. I've been running it for a week and have not found anything rom related wrong. I am dual sim too.[/QUOTE
My stock ROM have mobile network standby cause battery drain , This 9.0 rom have too? I am dual sim too.
Click to expand...
Click to collapse
Kudos @Flinny. Will give this a whirl during the weekends as it requires full format data partitions. Awesome mews ??
Sent from my HTC U11 using Tapatalk
The dark theme isnt working for me. Other than that this rom flies!
Everything seemed to be working but dark theme and WiFi calling is not working on T-Mobile. You can turn it on but it doesn't do anything. Pretty snappy though, look forward to trying this full time when WiFi calling is working, that is if it ever works. =) Great job @Flinny
Volte not working
---------- Post added at 09:13 AM ---------- Previous post was at 08:40 AM ----------
Not supporting the quick charge
pradyumna2009 said:
Volte not working
---------- Post added at 09:13 AM ---------- Previous post was at 08:40 AM ----------
Not supporting the quick charge
Click to expand...
Click to collapse
It means slow charging?
Normal fast charging seems to work, Qualcomm quick charge on the other hand is the same as it was on my Oreo builds. HTC did something strange with it on stock...
Sent from my ocn using Tapatalk
How to activate the gesture?
Martinodanada79 said:
How to activate the gesture?
Click to expand...
Click to collapse
Read post number 2....
Sent from my ocn using Tapatalk
Flinny said:
Normal fast charging seems to work, Qualcomm quick charge on the other hand is the same as it was on my Oreo builds. HTC did something strange with it on stock...
Sent from my ocn using Tapatalk
Click to expand...
Click to collapse
What about volte ? Will later builds support volte?
Thanks for all your work.
The ROM feels great, but there's one problem:
The capacitive hardware navigation buttons won't react toward long press (including home button).
Which means I can't access Google assistant by home button, and can't split screen by recent button.
I'm using Buttons Remapper to solve it somehow.
COSP
Code:
**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****
Welcome to COSP, your new future Android Operating System.
Our goal is to have an Pixel-like android ROM that isn't spying on you and uses as few system space as possible. Also, we provide the option to go completely without GApps using MicroG support.
Why us?
We are focusing on stability and performance, having an debloated ROM is essential for that. Also, we want Users to decide what kind of Store they want to use, either F-Droid or the Play Store.
Also, we take User requests serious. To suggest something, contact us on telegram.
Features:
1) All systemUI tuning elements
2) An handy Network indicator
3) Charging Information
4) Lawnchair and Quickstep as default
5) Quick Settings mods
6) Signature spoofing
7) OP gestures
8) Navbar tuner
9) Rootless Substratum (with fixes to theme system correctly)
10) Screenshot/screenrecord tile
11) Advanced power menu
12) Double tap to sleep on statusbar
13) Option to disable quick settings/power menu on secure lockscreen
OTA Updating for official devices enables Users to get the newest version with ease.
DOWNLOADS:https://www.androidfilehost.com/?w=files&flid=290004
Sources:
ROM Source: https://github.com/cosp-project/
Kernel Source code: https://github.com/lineageos/android_kernel_google_marlin (Will be changed with my own kernel)
Device tree: https://github.com/bdashore3/android_device_google_marlin/tree/cosp
microG is fully supported on this rom. I use it myself. To get started, I'd recommend going to this telegram group
Mod Edit: Link Removed
KingKernel has now grown into King Development
Mod Edit: Link Removed
Please don't ask about sailfish builds because there are NO builds for sailfish. If someone wants to build for it, be my guest
And please don't spam saying that something doesn't work, I'll tell the developers or edit it myself
Known Issues:
Popup saying something is broken in device - fixed when I use kingkernel for the next build
Update!
Changelog (Probably not full because it's unofficial)
-Add system-wide dark theme
Download here: https://www.androidfilehost.com/?w=files&flid=290004
Enjoy!
Always god to have new ROM developers here! Good luck with your project! :good:
Cheers...
Just took it for a spin, it runs well and always happy to have a system wide dark mode! A couple of Questions / requests:
IS it possible to have a night / dark mode Option like stock with "automatically based on time", please...?
Is the kernel based on your King kernel?
Thanks for your good work on our device, cheers…!
venkatsrin said:
Just took it for a spin, it runs well and always happy to have a system wide dark mode! A couple of Questions / requests:
IS it possible to have a night / dark mode Option like stock with "automatically based on time", please...?
Is the kernel based on your King kernel?
Thanks for your good work on our device, cheers…!
Click to expand...
Click to collapse
I'll ask the devs about the timed thing, but you can ask in the telegram link in the OP. This doesn't use KingKernel because I'm still trying to figure out how to use custom clang and GCC toolchains to compile inline
kingbri said:
I'll ask the devs about the timed thing, but you can ask in the telegram link in the OP. This doesn't use KingKernel because I'm still trying to figure out how to use custom clang and GCC toolchains to compile inline
Click to expand...
Click to collapse
Just add the toolchain path to your BoardConfig.
Hi, I went from Los 16 on my marlin and wanted to try this rom,
but all I ever got was error message when setting it up saying that ” the downloader keeps crashing” ( perhaps not exact wording since I use Swedish on the phone. )
Where should I look for a solution, I still want to test Cosp?
I'm going to be "that" guy, but rom possible for the sailfish (pixel)? I'd love to run this rom, if anything I can download source and attempt to build it myself. Thanks in advance!
ztotherad said:
I'm going to be "that" guy, but rom possible for the sailfish (pixel)? I'd love to run this rom, if anything I can download source and attempt to build it myself. Thanks in advance!
Click to expand...
Click to collapse
Check the third post
Has the pop-up saying something is broken been fixed.
cyberbandit1998 said:
Has the pop-up saying something is broken been fixed.
Click to expand...
Click to collapse
Yes, it was the kernel not playing nice with verity, kingkernel builds will fix this
meonit said:
Hi, I went from Los 16 on my marlin and wanted to try this rom,
but all I ever got was error message when setting it up saying that ” the downloader keeps crashing” ( perhaps not exact wording since I use Swedish on the phone. )
Where should I look for a solution, I still want to test Cosp?
Click to expand...
Click to collapse
Must be the error described in the known errors
Since I am now developing for other things than just kernels, feel free to join the King Development Telegram chat
Mod Edit: Link Removed
Which gapps are supported?
So, this is dead? What a shame.