[Q] wifi and other issues in percy_g2' cm11 - Moto E Q&A, Help & Troubleshooting

does wifi work perfectly in this rom?? i'm still on stock rom,unrooted,,,, i want to flash this rom.but many users are saying that they are facing some wifi problem while using this rom,and i use wifi everyday.and is gps working?and which recovery is..recommended to flash this rom..for 1st time?
and one more q...some of the users are saying that theye are not facing any problem...how can this possible?same phone,same rom....and some are facing problem and some are not!!!!!!

dchatterjee172 said:
does wifi work perfectly in this rom?? i'm still on stock rom,unrooted,,,, i want to flash this rom.but many users are saying that they are facing some wifi problem while using this rom,and i use wifi everyday.and is gps working?and which recovery is..recommended to flash this rom..for 1st time?
and one more q...some of the users are saying that theye are not facing any problem...how can this possible?same phone,same rom....and some are facing problem and some are not!!!!!!
Click to expand...
Click to collapse
Dear friend, this ROM working flawlessly. I am using this since from first build , there were couple of hiccoughs like GPS & wi-fi. They are completely fixed.
Latest CM11 Nightly 11 is almost flawless except GPS ( my friend still facing problem & its fine with me. )
As far as recoveries its your prerogative. There is TWRP 2.7.1.0 touch recovery by cybojenix or Philz CWM Touch Recovery 6.57.9 by percy_g2 ( wiping of cache is bit slow ). Both of them are excellent.
Even if you face any problems after flashing , there are enough Senior members to help you.

This rom works great for me too. No bug or issues i have discovered till now.
Only thing that is letting it down is, inbuilt CPU control of cyanogenmod. It is not working at all for me.

Philz CWM Touch Recovery 6.57.9 by percy_g2
drishd said:
As far as recoveries its your prerogative. There is TWRP 2.7.1.0 touch recovery by cybojenix or Philz CWM Touch Recovery 6.57.9 by percy_g2 ( wiping of cache is bit slow ). Both of them are excellent.
Even if you face any problems after flashing , there are enough Senior members to help you.
Click to expand...
Click to collapse
is Philz CWM Touch Recovery 6.57.9 by percy_g2 working perfectly??? is there any bug????

Its bit slow while cleaning cache. Better go for TWRP.

drishd said:
Its bit slow while cleaning cache. Better go for TWRP.
Click to expand...
Click to collapse
which recovery do u use?
is there any type of problem???

TWRP It is best with no issues.

Related

[Q] error mounting /emmc/ .android_secure

I haven't had this error till today! I was flashing DarkRom 2.5 and following its procedure for flashing. When i tried to factory reset via CWM recovery I got this error " error mounting /emmc/ .android_secure " .
I searched Google for fixes. Many had recommended to format the internal memory but again many mentioned it is not safe to format internal SD.
I am using SlidingXP v9 stable.
Any suggestions?
Edit: it gets stuck at Sony logo if i flash DarkRom v2.5
reflash back to stock rom.. via flashtool if possible (not sure if it can be done on Xperia to prevent doing brick.. ujff)
me too i have seem problem
xperia P works fine but i cannot format emmc partition
BlackRainX said:
reflash back to stock rom.. via flashtool if possible (not sure if it can be done on Xperia to prevent doing brick.. ujff)
Click to expand...
Click to collapse
I did, many times!!
But this problem still exists!!
I am gonna try different kernel and see if iy helps!
edit: nope flashing another kernel didn't help.. i formatted my internal memory but that didn't help either..
Sent from my LT22i using Tapatalk 2
that's the kernel related problem bro even in Phantom and Sliding cause the CWM is the same!This is probably due the CWM problem.
Xperia_Fans said:
that's the kernel related problem bro even in Phantom and Sliding cause the CWM is the same!This is probably due the CWM problem.
Click to expand...
Click to collapse
Yea I finally figured it out! new version of CWM recovery gives this problem!
Thanks!
Sent from my LT22i using Tapatalk 2
i got the same problem with the sliding v9 kernel. i dont know how to fix this :/
SupaaRoxxa said:
i got the same problem with the sliding v9 kernel. i dont know how to fix this :/
Click to expand...
Click to collapse
This problem is caused my Phil's kernel. Flash the standard cwm kernel and you'll fix it! You can find it on dark rom 2.5 thread!!
Here flash the recovery mentioned here. This should fix the problem! http://forum.xda-developers.com/showthread.php?p=34812923
Sent from my LT22i using Tapatalk 2
AmG77 said:
This problem is caused my Phil's kernel. Flash the standard cwm kernel and you'll fix it! You can find it on dark rom 2.5 thread!!
Here flash the recovery mentioned here. This should fix the problem! http://forum.xda-developers.com/showthread.php?p=34812923
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
the link u have given is for ics rom. Wat about JB? I'm also facing this problem and another problem i'm facing is unable to play games like fifa14, sims..which have sd files. Games like subway surfers and temple run work fine.....can anyone help me please....
I had this problem in other kernels, but in latest Nemesis kernel 6.1 (6.2 released yesterday) I tend to relieve from the problem.

[Q] Wifi issue in Xperia U after updating custom rom eXperience v2.1

Dear all,
Pl help me I have just today installed custom rom eXperience V2.1 which works fine except one thing. I lost my wifi connection. Wifi could not getting started after this update.
Phone: Xperia U
Android ver: 4.0.4
Custom rom: experience V2.1
kernel version: 3.0.8-munjeni
Try reflashing the rom.......... sum times it happens @Chirag Soni
Chirag Soni said:
Dear all,
Pl help me I have just today installed custom rom eXperience V2.1 which works fine except one thing. I lost my wifi connection. Wifi could not getting started after this update.
Phone: Xperia U
Android ver: 4.0.4
Custom rom: experience V2.1
kernel version: 3.0.8-munjeni
Click to expand...
Click to collapse
after flashing the ROM V 2.1 reboot ur device then power off and go to recovery menu flash again munjeni's kernel.
Still wifi is not working
sarathxu said:
after flashing the ROM V 2.1 reboot ur device then power off and go to recovery menu flash again munjeni's kernel.
Click to expand...
Click to collapse
Tried the above but the wifi is still not working. Any solutions anyone. Or do i need to do the steps again from the begining.
tonan791 said:
Tried the above but the wifi is still not working. Any solutions anyone. Or do i need to do the steps again from the begining.
Click to expand...
Click to collapse
Ask the OP of the thread where you got the ROM.. He can help you more than anyone..
Try any other ROM if interested..
I think i found a solution
tonan791 said:
Tried the above but the wifi is still not working. Any solutions anyone. Or do i need to do the steps again from the begining.
Click to expand...
Click to collapse
So if you go back to the instructions page : http://forum.xda-developers.com/showthread.php?t=2163800
You would have downloaded memorytweak.zip and extracted the ftr file.
So what i did was
Went back to CWM
Chose install from SD card
Installed the memorytweak.zip
It fixes the wifi as well
So now Wifi, hotspot, GPS (never tested to see it had problems earlier) are all working fine now.
Reinstalling Memory_Tweak.zip in CWM works!
I had the same issue. After reinstalling Memory_Tweaks.zip in CWM WiFi works fine!
tonan791 said:
So if you go back to the instructions page : http://forum.xda-developers.com/showthread.php?t=2163800
You would have downloaded memorytweak.zip and extracted the ftr file.
So what i did was
Went back to CWM
Chose install from SD card
Installed the memorytweak.zip
It fixes the wifi as well
So now Wifi, hotspot, GPS (never tested to see it had problems earlier) are all working fine now.
Click to expand...
Click to collapse

[Q] [ROM][MIUI-INDIA] Canvas HD A116 3.10.25{Closed permanently}

I downloaded this rom(MIUI India-V 3.10.25)yesterday and flashed it via twrp.Once booted while unlocking the phone restarts itself.Pls look into this issue and provide a solution.
Update: The thread is closed
manojnagendra said:
I downloaded this rom(MIUI India-V 3.10.25)yesterday and flashed it via twrp.Once booted while unlocking the phone restarts itself.Pls look into this issue and provide a solution.
Click to expand...
Click to collapse
Hi Bro have you flashed the rom again pls check
If yes then flash your stock rom via SP tool and root your device again and then flash this rom again and then check it
sumit.gore21488 said:
Hi Bro have you flashed the rom again pls check
If yes then flash your stock rom via SP tool and root your device again and then flash this rom again and then check it
Click to expand...
Click to collapse
Thanks bro for the quick reply.But it doesn't work for me.I did flash stock rom via SP tool and rooted the device and flashed the recovery but the same thing happens.Did this rom work for you in your phone?I will appreciate if you give me a solution and pls check and tell whether is the rom buggy?
Answer:
manojnagendra said:
Thanks bro for the quick reply.But it doesn't work for me.I did flash stock rom via SP tool and rooted the device and flashed the recovery but the same thing happens.Did this rom work for you in your phone?I will appreciate if you give me a solution and pls check and tell whether is the rom buggy?
Click to expand...
Click to collapse
Hi,
I have used this rom for almost a day now. There are no bugs whatsoever. It is really stable. Didn't notice any battery drains either. best suitable for a daily driver.
About, the bootloop issue, try to reflash the rom again according to the instructions in the Rom Thread.
Wipe data, Wipe cache, Wipe dalvik, Format System and flash rom. Don't flash any patches provided in the thread. Since the rom is pre-rooted, i dont think you need to flash the stock rom using SP flash tools and then flash this rom.
P.S.: I used TWRP recovery to flash this. Not CWM. Try flashing the ROM using TWRP.
Cheers!
Nexus Almighty said:
Hi,
I have used this rom for almost a day now. There are no bugs whatsoever. It is really stable. Didn't notice any battery drains either. best suitable for a daily driver.
About, the bootloop issue, try to reflash the rom again according to the instructions in the Rom Thread.
Wipe data, Wipe cache, Wipe dalvik, Format System and flash rom. Don't flash any patches provided in the thread. Since the rom is pre-rooted, i dont think you need to flash the stock rom using SP flash tools and then flash this rom.
P.S.: I used TWRP recovery to flash this. Not CWM. Try flashing the ROM using TWRP.
Cheers!
Click to expand...
Click to collapse
Hi,
I followed the steps as mentioned in the thread.I tried flashing it through TWRp,CWM and Carliv Touch recovery.Nothing works and the same problem.I also tried to flash the stock firmware and reflash this rom but nothing works.Can you suggest me any other solution.
Thanks
manojnagendra said:
Hi,
I followed the steps as mentioned in the thread.I tried flashing it through TWRp,CWM and Carliv Touch recovery.Nothing works and the same problem.I also tried to flash the stock firmware and reflash this rom but nothing works.Can you suggest me any other solution.
Thanks
Click to expand...
Click to collapse
did u have any pin lock ?
Javajohn said:
did u have any pin lock ?
Click to expand...
Click to collapse
Yes I had a pin lock for the two sims(airtel) and phone password i.e., pin.But I tried to flash stock firmware and reflash the rom.Pls help me so that I can use this rom perfectly.
Thanks.
manojnagendra said:
Yes I had a pin lock for the two sims(airtel) and phone password i.e., pin.But I tried to flash stock firmware and reflash the rom.Pls help me so that I can use this rom perfectly.
Thanks.
Click to expand...
Click to collapse
disable pinlock ... it will work
as miui has issue with tempo so its major bug for ported roms
Javajohn said:
disable pinlock ... it will work
as miui has issue with tempo so its major bug for ported roms
Click to expand...
Click to collapse
Thank you very much Javajohn.It worked for me and I disabled the pin.I was trying since 3days.now it worked
manojnagendra said:
Thank you very much Javajohn.It worked for me and I disabled the pin.I was trying since 3days.now it worked
Click to expand...
Click to collapse
u r welcome
by the way that rom is build by me and here is its orignal thread
http://forum.xda-developers.com/showthread.php?t=2501688
if u posted this there then u dont have to wait for 3 days
Javajohn said:
u r welcome
by the way that rom is build by me and here is its orignal thread
http://forum.xda-developers.com/showthread.php?t=2501688
if u posted this there then u dont have to wait for 3 days
Click to expand...
Click to collapse
I was not able to post in the thread as xda restricted me by telling junior member less than 10 posts.I did not know that.
One more thing dev,gps is not working.pls look into this and provide a fix

[help] wifi wont work after any new rom

Hi every one
i run (cm-10.1-20130519-NIGHTLY) on my gt-i9100
and its work fine for me , when i update it with ota its work fine but the wifi cant find any thing .
yesterday i download
(Resurrection_Remix_KK_v5.0.4-20140227-i9100) with
CWM-KitKatCompatible-i9100 v 6.0.4.7,
and i have the same problem everything work fine but wifi found nothing
i try Siyah-s2-v6.0b5-CWM kernel but after the Siyah logo dim out nothing happen for about 90 min but the phone heat up .
after flash (Resurrection_Remix_KK_v5.0.4-20140227-i9100) again i flash gustavo kernel (kk-kernel-22-02-CWM) but nothing happen
i also try ( cm-11-20140301-NIGHTLY-i9100) and dirt unicorn ( du_i9100_20140218-0916)
with the same problem
any help please
tareq agha said:
Hi every one
i run (cm-10.1-20130519-NIGHTLY) on my gt-i9100
and its work fine for me , when i update it with ota its work fine but the wifi cant find any thing .
yesterday i download
(Resurrection_Remix_KK_v5.0.4-20140227-i9100) with
CWM-KitKatCompatible-i9100 v 6.0.4.7,
and i have the same problem everything work fine but wifi found nothing
i try Siyah-s2-v6.0b5-CWM kernel but after the Siyah logo dim out nothing happen for about 90 min but the phone heat up .
after flash (Resurrection_Remix_KK_v5.0.4-20140227-i9100) again i flash gustavo kernel (kk-kernel-22-02-CWM) but nothing happen
i also try ( cm-11-20140301-NIGHTLY-i9100) and dirt unicorn ( du_i9100_20140218-0916)
with the same problem
any help please
Click to expand...
Click to collapse
Flash kitkat roms only from cwm 6.0.4.3+ and other roms with lower version of recovery. This is a known prob with kitkat recoverys
bhavstech said:
Flash kitkat roms only from cwm 6.0.4.3+ and other roms with lower version of recovery. This is a known prob with kitkat recoverys
Click to expand...
Click to collapse
thank you for replay
but i previously use many cwm versions 6.0.1.3 and 5 v and 4.0.1.5 with the same problem .
but once when i flash Siyah-s2-v6.0b5 kernel , i use fix permission command from its recovery version and flash Resurrection_Remix_KK_v5.0.4-20140227-i9100 again , the wifi work for about 1 min and stop working.
whats the solution ?
tareq agha said:
thank you for replay
but i previously use many cwm versions 6.0.1.3 and 5 v and 4.0.1.5 with the same problem .
but once when i flash Siyah-s2-v6.0b5 kernel , i use fix permission command from its recovery version and flash Resurrection_Remix_KK_v5.0.4-20140227-i9100 again , the wifi work for about 1 min and stop working.
whats the solution ?
Click to expand...
Click to collapse
Kitkat roms have to be flashed from cwm 6.0.4.3 +
bhavstech said:
Kitkat roms have to be flashed from cwm 6.0.4.3 +
Click to expand...
Click to collapse
i use this version CWM-KitKatCompatible-i9100 v 6.0.4.7
and still not work
and thank u again
The two of you in this thread are talking about two separate things. Yes you need to flash KitKat using a CWM 6.0.4.3+.... But OP has stated he's done that, so that's fine. The flash worked fine, but wifi doesn't.
OP, first try using a static ip address. If that doesn't work, time for you to flash a stock ROM and test wifi. Flash it with Odin using the stickied guide at the top of this forum, or use Mobile Odin, up to you.
If wifi works on stock ROM, then that's good... No hardware fault. If it doesn't work on stock with a static ip, it could be your router. Else, it's hardware fault and time for a service centre.
Sent from a galaxy far, far away
thanks all for replay
the problem is fixed
i change the wi-fi region code and every thing work fine , just like that.
and again thanks all

Moto E almost dead

Hi Guys!
Today I need your help. My moto e runs perfectly on kitkat roms only. When I flash lp or mm roms, it's system ui starts force closing. This is how the problem started:
I was on cm13 nightly and I decided to update my twrp from play store. So, I downloaded the twrp manager app from play store and updated my recovery to 3.0.0. And the phone worked perfectly until the next day, when it started giving Fc's all of a sudden. I rebooted to recovery and made a full wipe including internal storage. Then I flashed cm11 and flashed gapps. The ROM booted up perfectly and had no fc's at all. So I decided to flash mm again. I flashed AOKP marshmallow but it again started giving me FC's. So, I reverted back to cm11and found no fc's again.
Here's the list of ROMs I tried and was unsuccessful each time:
AOKP(MM)
AOSP(MM and LP)
Cm13
Cm12.1
Blisspop(MM and LP)
Tesla ROM(LP)
Crdroid(MM)
ZephyrOS(MM)
AICP(MM)
Here's the list of ROMs I flashed and the device didn't give any fc's:
Cm11 nightly
Stock ROM Optimized
Stock ROM Full
CrDroid(kitkat)
Please guys I am in need of Deliberate help. Please do not post condolence comments like,"Strange issue mate, Sorry I don't know, Best of Luck". Please post only if you know the method or you have any links to the method.
In need of your help,
Regards,
PoseidonKing
I had the same issue with other MM roms. I got no fc error on CM13 and Resurrection Remix MM rom. Only these two mm Roms worked for me.
It's surely a device hardware issue. If only kitkat based roms work in your condor, then maybe it doesn't properly support art framework. So your last resort maybe going to service center
Sent from my Moto E
Try flashing factory image
Sent from my Moto E using Tapatalk
i think the problem is in the recovery. download cwm recovery img and flash it with fastboot and after that wipe everything including internal storage (do not reboot recovery at that tyme or before installing rom ) do not wipe ur sd card and then install rom without gapps and boot up after sucessful boot then again boot to recovery and install gapps... if problems remains same then try downloading other gapps package for 6.0 (preferred open gapps).
no need all of this, just record the logcat and post here, surely you'll get proper fix!
I think Twrp 3.0 is causing this revert to old 2.8 version.It is nothing to do with hardware if it is a hardware related problem then you can't even switch on phone.
Agreed! Custom recoveries known to, often cause these sort of problems.. Give the twrp 3.0.2 by magdoez or 2.8.7 a try.. These are the ones that work perfectly for me.
Try updating recovery from your current recovery itself & reboot.. Then try the aforementioned mm roms..
piku 123 said:
I think Twrp 3.0 is causing this revert to old 2.8 version.It is nothing to do with hardware if it is a hardware related problem then you can't even switch on phone.
Click to expand...
Click to collapse
Thanks bro, but the method ain't working. I am currently on TWRP 2.7.1.0 and I still face the same problem...
Adarsh1998 said:
no need all of this, just record the logcat and post here, surely you'll get proper fix!
Click to expand...
Click to collapse
Okay, thanks! But how the hell do I record a logcat??
PoseidonKing said:
Okay, thanks! But how the hell do I record a logcat??
Click to expand...
Click to collapse
Refer this thread: http://forum.xda-developers.com/showthread.php?t=1726238&page=28
Sent from my Moto E using Tapatalk
Hi guys,
Thank You everyone for your generous and quick help. My Moto E is fixed now. I flashed cyanpop mm and then tried the adopted sd option. Rebooted the device and now it is working perfectly. Though it wouldn't have been possible without my brother's help @Andy1911. Thank you once again to all of them who helped me.
Regards,
PoseidonKing.

Categories

Resources