Related
Let me start off by saying I DO know what I am doing when it comes to rooting and Odin. And yes I have searched and found nothing.
With that out of the way, for some reason when I go to root my tab, Odin recognizes it and everything goes smoothly until I click on PDA and try to locate the recovery file to flash cwm. I am running Widows 8 consumer preview and have had no other problems with it thus far except for finding the file. Any ideas? It doesn't matter how I extract the file, my comp will not find the file so I cannot achieve root.
UPDATE: So apparently you cannot use Odin from the Windows 8 Consumer Preview because it does not play nice with Windows Explorer to locate the recovery .tar file to flash CWM. All is well though, I used another laptop running Windows 7 and everything is good and now I can proceed with Flashing CM9
What file are you extracting?
Also to help you further what guide are you following?
I suggest the one in my signature by S0ckM0nk3y.
Edit: I figure you can't find this 'recovery.tar.md5" file. Which you want to use with Odin.
I also just noticed you were using Win 8 So I'm out of my comfort zone trying to help much.
Sorry for the interruption of your post.
no apology necessary, I appreciate any help I can get or any suggestions. I am going to try on a friends computer that is on Windows 7 and see if odin will be able to see the file that way, if not, i guess i am SOL. Here's hopin'
It's just my thinking but don't you tell the program you unzip with "where" to unzip to?
If so, can't you just remember that "place" when Odin pops up with a box to select a file and use "that place" you told it to unzip to?
Again sorry if I'm way off here, as I don't know what you are using to unzip the files. Just seems strange to me.
I do know that's exactly how it works in Win 7 with just about any prog you choose to unzip with you can tell it where so it's easy to find it from Odin.
In any case. Best of luck.
Yeah that is normally how it works with unzipping the file and then locating iit normally, and thats what I was doing, however Odin apparnetly does bot play nice with Windows 8 explorer when it comes to locating files. I just finished rooting the tab, but I had to do it from a windows 7 laptop instead of my windows 8. Whatever, i am happy and I appreciate you taking the time to throw something out there. I guess now I should update the first post as solved....sort of
Hi,
I'm actually trying to port Firefox OS 2.1 on the Nexus 7 2013 (aka "flo"), and after managed to download and compile the sources, I am facing a problem at the last step. Instead of flashing Firefox OS on my Nexus via the conventional method (using flash.sh), I would like to create a recovery-flashable zip file (as is often seen with custom ROMs). However, I have no idea how to build one, and the analysis of some zip files does not really helped me to understand which files to include and which script to write.
Here are the files generated by the build: http :// i.imgur.com / MgobUsp.png
If anyone could help me and explain me how to create that famous zip file ^^.
In advance,
thank you
Nobody? :-/
@cmbaughman was working on this in this thread: http://forum.xda-developers.com/showthread.php?t=2479192&page=6
ImCoKeMaN said:
@cmbaughman was working on this in this thread: http://forum.xda-developers.com/showthread.php?t=2479192&page=6
Click to expand...
Click to collapse
Due to a large project that came my way at work, I've been unable to work on this however I hope to in a few weeks after we demo our new apps. If you want to check mine out it's here http://goo.gl/gioiDv however the only real issue with mine which is quite fixable was that I used the wrong version of the Gaia, and webapps. You can use mine as a template really, here is how:
1. Build FF OS
2. Now when building ( I am going from memory here so ask if you ha e questions), pass the argument otapackage and you'll get a "flashable" update.zip in your out dir.
3. Find either a fully built version of ff for any device but make sure its the same version, OR build Gaia yourself, see the official docs for how to do that as they explain it very well.
4. From that you go through the output and find the webapps dir.
5. Copy webapps to your built otapckage at /system/b2g/webapps.
6. Now I'd use either my update script from the link I gave you (after looking through and updating anything that needs updated because mine is a few months old.) Make sure there is nothing in there about formatting data or anything (cause you don't want to lose that!) And after repackaging (use a kitchen or whatever method you prefer), you'll have a flashable Firefox zip.
Its a process so use a little trial and error and you'll overcome any issues you find. Any questions let me know.
ImCoKeMaN said:
@cmbaughman was working on this in this thread: http://forum.xda-developers.com/showthread.php?t=2479192&page=6
Click to expand...
Click to collapse
Due to a large project that came my way at work, I've been unable to work on this however I hope to in a few weeks after we demo our new apps. If you want to check mine out it's here http://goo.gl/gioiDv however the only real issue with mine which is quite fixable was that I used the wrong version of the Gaia, and webapps. You can use mine as a template really, here is how:
1. Build FF OS
2. Now
any progress on this im intrested in doing this
Don't waste your time creating such a zip file, just use fastboot to flash the various IMG compiled files.
Hi all,
to make it plain and short: I messed up.
I have a GT-S5830i which I unrooted according to the Sticky Note in the forum, installed CWM Recovery and then 'installed from ZIP' a CM9_cooperve_Beta_05.zip that I found in one of the posts in the forum. The installation went on without error message but since then the phone does not make it beyond the initial screen "Samsung Galaxy Ace GT-S5830i". I can start recovery mode and Download mode. In reovery mode I can format cache, data, sdcard, sd-ext but *not* system. Error Message: "E: format_volume: make_ext4fs failed on /dev/block/st19"
I have tried already several methods according to the forum, e.g.
1) 'install from ZIP' older Cyanogenmod
2) the tool ext4_formatter.zip
3) re-flash with ODIN with several tar-ROMs, all failed. Odin finds the phone (since I start Odin as Admin now), but after I hit 'start' it tries to establish a connection to the phone and ends after a while with 'Failed'
I'm basically lost now, don't know what else to do. Any advise is appreciated (it's my mom's phone, she is getting impatient )
Thx, cheers!
Xala
Hi @xalarsk , So you can't format your /system partition , which is required for installation of your rom ,, you need to try this method from here mate . Follow my instruction from the line @post#4 :"1. Download one of the newest ,,," to the end of the post and please do not use CM9 beta , because it is unstable and will wreak havoc with your system eventually . ( either cm7 or cm11 is the place you should go for CyanogenMod experience for cooperVe device ).
If you fail at any level please give us your logcat ( error massage ) for better support for your Odin process you mentioned .
Cygwin not working
Hi @ehsanotaku,
thank you for your quick reply, it's appreciated!
Unfortunately I couldn't get cygwin to install all necessary packets. The ZIP-test always failed. I have a Linux system running (Linux Mint 17) though, and hope that might help. In the meantime I tried to download the already split packages as described in another of your forum posts, but the website provides only exe-files instead of zip-files. Is there another location to download them?
#UPDATE: It seems there is a SplitFUS2 version for linux somewhere but couldn't find links to download. Anybody can help? I'll also PM Doky73
Cheers, Holger
xalarsk said:
Hi @ehsanotaku,
thank you for your quick reply, it's appreciated!
Unfortunately I couldn't get cygwin to install all necessary packets. The ZIP-test always failed. I have a Linux system running (Linux Mint 17) though, and hope that might help. In the meantime I tried to download the already split packages as described in another of your forum posts, but the website provides only exe-files instead of zip-files. Is there another location to download them?
#UPDATE: It seems there is a SplitFUS2 version for linux somewhere but couldn't find links to download. Anybody can help? I'll also PM Doky73
Cheers, Holger
Click to expand...
Click to collapse
Cygwin was meant for windows platform to get the native Linux environment/command line you already got there . You can create a virtual instance of the windows 7 inside virtualbox or any kind of apps you are preferring such as Vmware/Parallel etc etc to get the job done .
Splitfus2 only supports windows platform as far as i know mate,,, either vitalization as i said or the pre-made zip package ( which is clearly not .exe file ,, push the download now and get yourself a descent downland manager,, tested and zip packaged delivered ) from here is the feasible approach for your problem .
Ok, had all the files ready, just the Boot loader <DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.rar seems to be broken. I downloaded the link provided in your post #8 several times with several download managers, also uses 7-zip and several online unrar services..result always the same: The archive is broken. Is that possible? Would you mind to check yourself?
xalarsk said:
Ok, had all the files ready, just the Boot loader <DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.rar seems to be broken. I downloaded the link provided in your post #8 several times with several download managers, also uses 7-zip and several online unrar services..result always the same: The archive is broken. Is that possible? Would you mind to check yourself?
Click to expand...
Click to collapse
Another fellow had similar issue with my attachment that was corrected here @ post#27
Unbricked, SD card not recognized
Update: Phone has been unbricked, many thanks for that!
Currently I have still issues with the external SD card, which also holds the ZIP files. Phone won't recognize it, not even format it properly. Still working on that.
Cheers, Xala
xalarsk said:
Update: Phone has been unbricked, many thanks for that!
Currently I have still issues with the external SD card, which also holds the ZIP files. Phone won't recognize it, not even format it properly. Still working on that.
Cheers, Xala
Click to expand...
Click to collapse
Mostly this happened because of the bug inside CM9 beta you used . Study this topic mate i troubleshooted while ago for a sample of the symptoms external SD card would show after unstable ICS usage .
Also as an alternative to the method i instructed there , you can format/Re-partition your SD card by putting it inside card reader and using app such as free MiniTool Partition Wizard "Gparted" tool for Linux users Or "iPartiton" for Mac users etc etc ,, to get the job done . You can find several tutorials inside XDA for this matter mate.
Phone works with CM7.2, can I upgrade to CM9?
Hi again,
first of all, props to @ehsanotaku, I will hit the 'Thanks' buttons.
Now, this is a bit beyond the topic, but I'd like to ask anyway for recommendations of CM9 roms. The one I picked from a post inside this forum bricked my phone and made me start this thread, I don't want to go down this road again. So I'd be glad for any recommendation of a stable ROM that will put my phone beyond Android 4.0.
Cheers again,
Xala
So i have a similar issue. I used to have CM11 installed, but i figured thats too slow for me. Then i went back to stock rom (XXMJ2) which works fine. But now i have a problem.
Everytime i want to flash a stock based or cm7 based rom on my phone, it gets messed up. Today i wanted to flash this
http://forum.xda-developers.com/galaxy-ace/s5830i-develop/cm-7-2-kitkat-smart-r2-t3075267
i naturally downloaded clockwork mod recovery (5.0.2.6) and tried to flash it. Flashing was done pretty quickly (10 seconds or so) and when i rebooted, i obviously got stuck at sammy logo. Now booting back to the recovery (first e3 then cwm) i got bunch of error about partritions not being able to be mounted (happens the same if i want to manually mout them or format them)...
So, what to do ?
I have a suspicion, that flashing CM11 and the latest cwm recovery for it somehow messed up partritions.
hojnikb said:
So i have a similar issue. I used to have CM11 installed, but i figured thats too slow for me. Then i went back to stock rom (XXMJ2) which works fine. But now i have a problem.
Everytime i want to flash a stock based or cm7 based rom on my phone, it gets messed up. Today i wanted to flash this
http://forum.xda-developers.com/galaxy-ace/s5830i-develop/cm-7-2-kitkat-smart-r2-t3075267
i naturally downloaded clockwork mod recovery (5.0.2.6) and tried to flash it. Flashing was done pretty quickly (10 seconds or so) and when i rebooted, i obviously got stuck at sammy logo. Now booting back to the recovery (first e3 then cwm) i got bunch of error about partritions not being able to be mounted (happens the same if i want to manually mout them or format them)...
So, what to do ?
I have a suspicion, that flashing CM11 and the latest cwm recovery for it somehow messed up partritions.
Click to expand...
Click to collapse
ok not going to excruciating details of symptoms and explaining all of your errors for now just please read my advice @ post2 of this topic and follow the procedures accordingly and finished it with formatter tools and cm7 instructions you will find there ., after that you can install Kitkat Smart R2 like you are coming from another CM7 build instruction . btw some problem regarding super user privileges and play store 492-498 infamous bug was reported for this fairly new development .
Just saw this on the official Nubia page, appears to be android 5.0 with split partitions for Nubia Z7 mini dual sim:
http://www.nubia.cn/service.php?sid=5
(use translate)
Has anyone tried this? or seen it before?
I am rooted and gapped so I am a few versions behind as I lost OTA abilities, has anyone got this OTA? Would prefer to do it via this method than using their tool.
EDIT:
Looks like tomorrow is the day:
Dear Cowboys: Hello, everyone! Thank you very much for the concern and support of Nubia. We have been trying to improve the user experience of the system, but also endeavor to provide stable version, on Friday, we will publish Z7, Z7mini, Z7Max, the official version Z9mini and X6, the beta version Z9Max and subsequent versions will continue to update . We will soon open Z9Max, Z9mini recruiting closed beta, so stay tuned Oh! For nubia UI you have any questions and suggestions are welcome to nubia UI area or issue recommendations section exchanges. Once again, thank you for your patience. Nubian because you have more exciting! nubia team 2015-7-8
new stable Lollipop for mini's been officially released
link( in Chinese): http://pan.baidu.com/s/1hqGSezy (password:5mpy , MD5: 2651F3539381AA0B12A21B54729E2EBD )
Above rom can only be upgraded via official upgrade software: http://pan.baidu.com/s/1bnc0J1d (password: 2mua)
Be warned if u choose this one u must use the upgrade software I gave in the link, because there's some changes to the software, using old ones will cause boot loop.
Be warned using this method will lose all ur personal data and apps. U can only upgrade using this method if ur current rom is official 1.82 (4.4 Kitkat) or 2.03, 3.01 (5.0 Lollipop), if using other roms, CM or YIOS for example, the upgrade software will refuse to continue >_<. However, using MIUI6 is OK, because it is based on official 1.82.
recovery zip ROM: http://pan.baidu.com/s/1pJxaYM3 (passowrd:el1j, MD5: 4C409536B1124A86E65F1B66E94E0C2C)
This zip file can be flashed using both official and CM based recovery, provided ur current ROM is official 3.01, otherwise boot loop is also expected
As the files are too large, the only way to download them is by install a clound file management program issued by Baidu. Blame Nubia for not using cloud disk with English support
download link of Baidu cloud file manager:http://bcscdn.baidu.com/netdisk/BaiduYunGuanjia_5.2.7.exe
Just an FYI for other users lookign to upgrade.
My update went well. I installed 1.82 via custom reocvery method. This lost all data but thats what i wanted, to start fresh.
the I used the nubia updater tool to flash the 3.12 rom.
Once the rom is loaded, you will find a lot of junk chinese apps so you will want to clear those out and of course no root or google apps.
here is how to achieve this:
Root - download kingroot pak file from google, run it and you will have root. Its a bit bloaty, you can uninstall all the apps it creates except kinguser (this is the equivalent of superSu) - would be interested to now if anyone else has found a root method that works.
Install custom recovery:
https://mega.co.nz/#!fsMXSC6A!2Vpqy2SGIC_WbFAqNgzE6WgArW2vaWha-zwp_o7yvqE
Enable USB debugging
extract nx507j_twrp_2_8_5_0_NEW archive
connect phone via usb
run recovery.bat
(thanks to another xda user for this)
Boot into the recovery, and install:
pa_gapps-modular-mini-5.0.1-20150418-signed.zip
(google for that file, others may work but this is minimal and does what you need)
Once rebooted, open playstore, enter your gmail, then your contacts and calendar will be synced!
install an app like links2sd or root uninstall and start clearing out all of the garbage apps.
That should be enough to get you started. I will attempt to install xposed tomorrow.
Xposed:
see my other thread for xposed
So I seem to be stuck. I had used the nubia updater to get to 2.03 and rooted and dropped in TWRP. After that I did a TWRP backup. Next I did the usual steps and flashed CM12. Now I want to update again; but, my backup file of 2.03 is corrupted and won't boot. When I try to use the nubia update tool it doesn't see the phone even though it says the driver is installed correctly. I have also tried the steps that @rx1 posted on 7 May, but that hasn't worked yet. In my device manager settings it has Android Phone with a dropdown that says Android Composite ADB Interface and the driver is installed correctly. However, a little further in the list it says Other Devices and lists Android with the yellow exclamation. Despite what I try it won't find the driver for that one. It's confusing because one says it is correctly installed (as does the Qualcomm Drivers installer) and the other does not. Ohh, and when I look at my computer (sorry not a PC guy, borrowing from a friend) under Devices with Removable Storage, the phone shows as a DVD player. Any ideas or help out here?
Sorry, posted in wrong thread.
I think you wiped system when you installed CM 12 or later . Your phone has already merged partitions and you don't need Nubia Tools anymore.
- Go to TWRP
- Downlod form PC a 3.01 or 3.12 ROM , preferable rooted .
- install it after wipe only " factory reset " .
If your PC can't see the phone ( only as DVD ) ....try to re-install CM 12 from phone .
The only driver that works:
uninstall all existing items form your device manager, disconnect phone
download package: https://mega.co.nz/#!GN9GSQZL!F4ZMFAPPJKR8VBM0wqPWTaBB2Fuv6C1Go0bFl3fD6SM
run it and select option 1 install drivers
reconnect phone
(dont use this tool for anything other than dirvers on z7 mini.
Also agree with poster above you shouldn't be using nubia tool to flash a cm ROM. Use the instructions cm provide.
flamery said:
The only driver that works:
uninstall all existing items form your device manager, disconnect phone
download package: https://mega.co.nz/#!GN9GSQZL!F4ZMFAPPJKR8VBM0wqPWTaBB2Fuv6C1Go0bFl3fD6SM
run it and select option 1 install drivers
reconnect phone
(dont use this tool for anything other than dirvers on z7 mini.
Also agree with poster above you shouldn't be using nubia tool to flash a cm ROM. Use the instructions cm provide.
Click to expand...
Click to collapse
Thanks for your help. Although, I will say that I used TWRP to flash CM12, not the nubia updater. I do know that much. Maybe I'm misunderstanding, but it seems one of you is saying that I should use the update tool to get to 3.01 or 3.12 and the other seems to say flash it with TWRP; am I misunderstanding something here?
---------- Post added at 10:40 ---------- Previous post was at 10:35 ----------
The package says Z7Max? Is it actually for the mini?
Yes, as I said above only use this tool to install drivers. They are the same. Don't use it for anything else on a mini.
flamery said:
The only driver that works:
uninstall all existing items form your device manager, disconnect phone
download package: https://mega.co.nz/#!GN9GSQZL!F4ZMFAPPJKR8VBM0wqPWTaBB2Fuv6C1Go0bFl3fD6SM
run it and select option 1 install drivers
reconnect phone
(dont use this tool for anything other than dirvers on z7 mini.
Also agree with poster above you shouldn't be using nubia tool to flash a cm ROM. Use the instructions cm provide.
Click to expand...
Click to collapse
Thanks. That was my only problem. I had been using the wrong drivers. It worked quick and simple, just like it did before.
First of all hello everyone since this is my 1st post
I upgraded to official 3.01 Lollipop and I want to ask if it is possible to install playstore without root since I want to run an app that won't work if the phone is rooted and I can't find it anywhere else other than playstore, otherwise I would be just fine without all the google apps.
Alternatively would it work if I installed a pre rooted ROM and then unroot it, is that possible?
Hope this thread is suitable for these questions and thanx in advance to anyone that can help.
What app is it called? Maybe I can find it on play store then send you the apk install file.
It's called OTE TV GO but from what I've read even if you can find the apk it will not work unless you have downloaded it from your device.
Well I don't know how much luck you will have because it shows as incompatible with my device. (maybe because Im root?)
Anyways the way to do it is, either from chrome or firefrox install this extension on your PC
https://chrome.google.com/webstore/.../cgihflhdpokeobcfimliamffejfnmfii?hl=en&gl=VN
https://addons.mozilla.org/en-US/firefox/addon/apk-downloader/
go into the options and enter your device ID and email etc. then yeah just do as it says, go to the playstore then the extension will allow you to directly download the apk file then copy it and then install to your device.
Second option is, there is a app called "rootcloak" that will hide the fact you are rooted from any apps you choose to, so in theory the playstore and ota thing wont know you have root.
I tried the firefox extension but when I try to download any app I get "Cannot download this app.
Login session has expired or your email and device ID are incorrect/not activated on Google Play app"
Will try second option as soon as possible. Thanx anyway
Currently I run cataclysm rom on my nexus 5 (hammerhead).
I want to change to the latest CM rom, but:
1. I cant install oneclick.apk
2. cant download the latest rom (or any other file) to my phone not even with download managers
3. cant transfer any files to my phone (in both USB modes).
is this a windows 10 related problem?
abcdd said:
Currently I run cataclysm rom on my nexus 5 (hammerhead).
I want to change to the latest CM rom, but:
1. I cant install oneclick.apk
2. cant download the latest rom (or any other file) to my phone not even with download managers
3. cant transfer any files to my phone (in both USB modes).
is this a windows 10 related problem?
Click to expand...
Click to collapse
You'll find better results by asking here:
http://forum.xda-developers.com/google-nexus-5/help/help-thread-nexus-5-question-t2496506
Thanks posted it here (but more detailed aswell:
http://forum.xda-developers.com/google-nexus-5/help/help-thread-nexus-5-question-t2496506/page932