Hello guys.
I have a very big problem.
I used my galaxy s3 now a preety long time, especially with temaseks unofficial and was now some months with it and the last time i was with it on temaseks v124 since it was released and faced no problems, after time i got some problems and tried to dirty flash the 140 but didnt worked out well, then made a clean factory reset of all and flashed it with pa gaaps, but now i have the big problem that i tried 140 and 124 with many different pa gapps and everytime i flash only the rom it works normal out, but when i flash the gapps too then it freezes on the boot or when its on lockscreen after boot or after i unlocked it, i came nowhere near now to start any app.
But when i just flash the rom without gapps i get nothing, it works well then.
So what is the problem ?
Also to notice is that i flashed everything with just 7 % Battery, dont know if that helps..
Someone please help me !
Dude
I think pa gapps dont support temasek's ROM
better download gapps package from the ROM's main page!
Press thanks if it helped you
BFMSAND said:
Hello guys.
I have a very big problem.
I used my galaxy s3 now a preety long time, especially with temaseks unofficial and was now some months with it and the last time i was with it on temaseks v124 since it was released and faced no problems, after time i got some problems and tried to dirty flash the 140 but didnt worked out well, then made a clean factory reset of all and flashed it with pa gaaps, but now i have the big problem that i tried 140 and 124 with many different pa gapps and everytime i flash only the rom it works normal out, but when i flash the gapps too then it freezes on the boot or when its on lockscreen after boot or after i unlocked it, i came nowhere near now to start any app.
But when i just flash the rom without gapps i get nothing, it works well then.
So what is the problem ?
Also to notice is that i flashed everything with just 7 % Battery, dont know if that helps..
Someone please help me !
Click to expand...
Click to collapse
Look in the pagapps thread, there are others with the same issue. there's a file there to flash to give the developer more info.
FireBlazeGT said:
Dude
I think pa gapps dont support temasek's ROM
better download gapps package from the ROM's main page!
Press thanks if it helped you
Click to expand...
Click to collapse
Incorrect.
Related
Finally managed to get my phone working again...But can someone tell me what went wrong?
I was running JB NEATROM with SIYAH 4.1.5 Kernel. Strde I flashed GS2Wiper and then Dorimanx 9.42 kernel, then flashed CM 10.2. Booted and found all normal. went back and flashed Gapps system showing google maps , playstore error . Unable to use phone. Tried back flashing CM 10.2 and Slimbeam Rom working fine, but when flashing Gapps system gets stuck in booting logo.
Finally flashed old siyah kernel 4.1.5 and flashed NEATROM and to my big relief system operational. I want to update to JB 4.3 .Can someone please advice
are you doing a wipe and factory reset after all the different roms you are trying?
You can often avoid bootloops by following the developers ibstructions to the letter.
Then again, if certain ROM-Kernel combo is known for having this issue you could check that same custom ROM thread for support/fix.
That's pretty much how all of these flashing works.
Sent from the little guy
gastonw said:
You can often avoid bootloops by following the developers ibstructions to the letter.
Then again, if certain ROM-Kernel combo is known for having this issue you could check that same custom ROM thread for support/fix.
That's pretty much how all of these flashing works.
Sent from the little guy
Click to expand...
Click to collapse
Gaston, good to see you mate! Been stuck in another book for a few weeks?
@ OP: Beautiful summary by gastonw right here. Read the OP of the thread 2-3 times before flashing. You want to make sure it's compatible with your device, other mods/firmware, and that you know what you're doing during the install process.
Hey hopper, no, it's the UFC era now
Sent from the little guy
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
srchandran_72 said:
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
Click to expand...
Click to collapse
just flash the cm10.2 build if you've root n have installed cwm,
nasheich said:
just flash the cm10.2 build if you've root n have installed cwm,
Click to expand...
Click to collapse
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
srchandran_72 said:
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
Click to expand...
Click to collapse
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
nasheich said:
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
Click to expand...
Click to collapse
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
srchandran_72 said:
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
Click to expand...
Click to collapse
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
nasheich said:
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
Click to expand...
Click to collapse
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
srchandran_72 said:
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2
that should be the thread for your device
and for posting in a thread(speciallly in the dev thread), you must at least have more than 10 posting in whole xda thread
in general thread, you can post even you didn't have 10+ posting
please read the Rules of Xda for more detail about posting and everything
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Click to expand...
Click to collapse
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Darkened_Sky said:
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Click to expand...
Click to collapse
I tried with both stock and temasek once again and the touch screen still does not respond. I always used cwm for recovery though, and did a factory reset on the stock recovery once to see if that works. I can flash ultima as well I suppose but I am not sure if that will fix it.
Edit: I tried to flash ultima but the installation steps required the use of touch screen so I could not proceed.
Are you sure that you download Temasek's rom for I9300 not for another model? Because Temasek supports more devices.
And on Temasek's thread I didn't find any user complaining about touch screen issue after installing it,so I think that you flashed it for different model.
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Click to expand...
Click to collapse
Flash back to stock with odin if problem is still there then it is hardware issue....
I rechecked and it is temasek for I9300. I restocked ofc with odin and it is no use tbh. I mean it is weird as the first time I flashed stock rom the touch screen was not working for 30 seconds or sth than it started working so I was really happy for a second.. After another flash it was not working and I was like yea it will work soon, but it didnt. I tried with loads of roms and kernels and it is still no use.
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Darrier said:
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Click to expand...
Click to collapse
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Solution
Hey dude, I couldnt find any solution to that problem. What I did was to send it in for replacement but with warranty. For that you need to triangle away your phone and also install the official firmwares. I had to use a mouse in order to do that but you will need a usb to micro usb converter, which is not that hard to find( and also cheap). They couldnt tell that I installed unofficial firmware, I replaced my screen flawlessly. You can find how to triangle away your phone in this forum and also sammobile is the place to look for official firmware.
Cheers
wanerza77 said:
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
hey guys cynogenmod is almost perfectly working for our own togari.................................give it a try.
Here is the link
http://download.cyanogenmod.org/?device=togari&type=
Edit: Running the latest nightly for two straight days just aw************* buttery smooth and awesome battery life works like charm...............By the way i am a heavy user lot's of videos and net about camera it's you know ok....
awesome. good work man
been using it for the past few days and it's pretty much all good (apart from the camera)
I'd love someone to build an unofficial build with lockscreen notifications tho. i'd do it myself if i could ><
What's the difference ...
Whats the difference between the builds on the official CM site like these:
http://download.cyanogenmod.org/?device=togari&type=[/QUOTE]
And the FreeXperia builds from here:
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
Is it a different team? Same team just posting later? Or something else?
lkirkw said:
Whats the difference between the builds on the official CM site like these:
http://download.cyanogenmod.org/?device=togari&type=
Click to expand...
Click to collapse
I haven't tried any of the builds, but the FXP team collaborates with Sony.
Sent from my C6833 using Tapatalk
lkirkw said:
Whats the difference between the builds on the official CM site like these:
http://download.cyanogenmod.org/?device=togari&type=
Click to expand...
Click to collapse
And the FreeXperia builds from here:
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
Is it a different team? Same team just posting later? Or something else?[/QUOTE]
@lkirkw the FXP project release cm builds unofficially while these are the official cm builds....means get update on regular basis bug fixes on the go......
LordManhattan said:
I haven't tried any of the builds, but the FXP team collaborates with Sony.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
@LordManhattan ....MR.Manhattan what the hell man what are you doing .............................
Missing the awesomeness.............................
mathurmatt said:
@LordManhattan ....MR.Manhattan what the hell man what are you doing .............................
Missing the awesomeness.............................
Click to expand...
Click to collapse
I'm like the GPe ROM better. It's just so... bug free (running stock rooted now though)
Sent from my C6833 using Tapatalk
LordManhattan said:
I'm like the GPe ROM better. It's just so... bug free (running stock rooted now though)
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I normally flash all the roms as well but since I've flashed the gpe rom I haven't bothered with the others the GPe rom just works great have been on it for a month now
Sent from my C6806_GPe using XDA Premium HD app
I just get a bit loop no matter what I do. I've tried installing it a thousand different ways wiping this and that. I can even install the free xperia project one, but when I upgrade to the latest nightly out goes into a bit loop. I have up on it and installed Paranoid Android.
Sent from my Xperia Z Ultra using xda app-developers app
alphaandomega said:
I just get a bit loop no matter what I do. I've tried installing it a thousand different ways wiping this and that. I can even install the free xperia project one, but when I upgrade to the latest nightly out goes into a bit loop. I have up on it and installed Paranoid Android.
Sent from my Xperia Z Ultra using xda app-developers app
Click to expand...
Click to collapse
how did you flash exactly tell step by step cause flashed almost every nightly never had the problem
mathurmatt said:
how did you flash exactly tell step by step cause flashed almost every nightly never had the problem
Click to expand...
Click to collapse
You must have a C6833. I have a 02. I flashed every which way. From 4.3 and from 4.4, from BE ROM and from AOKP ROM, with wipe and without wipe, wiping dalvik and cache before, after and before and after. I spent an entire day. Flash boot.img and everything else I could think of. Nothing works. I just found out from another thread it's a common problem for the 02 model since February 12. It just keeps giving me the boot loop.
alphaandomega said:
I just get a bit loop no matter what I do. I've tried installing it a thousand different ways wiping this and that. I can even install the free xperia project one, but when I upgrade to the latest nightly out goes into a bit loop. I have up on it and installed Paranoid Android.
Sent from my Xperia Z Ultra using xda app-developers app
Click to expand...
Click to collapse
alphaandomega said:
You must have a C6833. I have a 02. I flashed every which way. From 4.3 and from 4.4, from BE ROM and from AOKP ROM, with wipe and without wipe, wiping dalvik and cache before, after and before and after. I spent an entire day. Flash boot.img and everything else I could think of. Nothing works. I just found out from another thread it's a common problem for the 02 model since February 12. It just keeps giving me the boot loop.
Click to expand...
Click to collapse
Well first of all i also have c6802 ............... It's not the issue with 33 or 02 ,06 nothing at all i can guarantee it....... let start from other rom as you said you flashed aokp rom ,,,, now put the cm rom into sdcard boot into recovery twrp preferred wipe check cache dalvick cache system data if you can back up your internal storage wipe data internal storage also(just do it one time as you suffered a lot).........After that reboot into recovery and simply power off the phone now extract the boot.img from cm zip.....put it anywhere opern flashtool connect your device into fastboot mode and flash your boot.img through it......... now boot straight to recovery and flash the rom...............done and about 99.9% sure it will go just fine ........:good:
mathurmatt said:
Well first of all i also have c6802 ............... It's not the issue with 33 or 02 ,06 nothing at all i can guarantee it....... let start from other rom as you said you flashed aokp rom ,,,, now put the cm rom into sdcard boot into recovery twrp preferred wipe check cache dalvick cache system data if you can back up your internal storage wipe data internal storage also(just do it one time as you suffered a lot).........After that reboot into recovery and simply power off the phone now extract the boot.img from cm zip.....put it anywhere opern flashtool connect your device into fastboot mode and flash your boot.img through it......... now boot straight to recovery and flash the rom...............done and about 99.9% sure it will go just fine ........:good:
Click to expand...
Click to collapse
OK, thanks for trying with me. I've done a nandroid backup and proceeded with the upgrade, using the latest boot.img. Same thing - boot loop. Which is weird. I've never had a problem with CM. I can install every other ROM without any problems - I don't understand why it's so difficult with CM this time. I have install the Free Xperia project version of CM and all goes well, I can boot into it. I've tried upgrading to the newer version - I see the "Android is upgrading..." message, then Finishing boot... and it stays of finishing boot for a long time then restarts and goes into a boot loop. SIGH. No more CyanogenMod for me, I guess. But thanks a lot for trying to help me here! Really appreciate you having spent your time. Cheers!
alphaandomega said:
OK, thanks for trying with me. I've done a nandroid backup and proceeded with the upgrade, using the latest boot.img. Same thing - boot loop. Which is weird. I've never had a problem with CM. I can install every other ROM without any problems - I don't understand why it's so difficult with CM this time. I have install the Free Xperia project version of CM and all goes well, I can boot into it. I've tried upgrading to the newer version - I see the "Android is upgrading..." message, then Finishing boot... and it stays of finishing boot for a long time then restarts and goes into a boot loop. SIGH. No more CyanogenMod for me, I guess. But thanks a lot for trying to help me here! Really appreciate you having spent your time. Cheers!
Click to expand...
Click to collapse
Well That was all i had Guess miscalculated by 0.01%.............
Hi guys, this is the latest Lollipop ROM rolled out by LG for the international G Pad 8.3.
It's the corean update but works just fine with mine and i hope also with your.
INFO:
1- You can flash it with the TWRP like every Rom out here, i used the bumped TWRP in the original devs thread;
2- The kernel is stock, i only set selinux to permissive because in my works for the G3 i've seen that it's the only way to avoid permission issues;
3- it's bumped so doesn't need nothing special, just flash it in TWRP like i said above;
4- You can dirty flash over the stock 4.4.2 ROM, i made it and had no issues at all.
5- If you are asking why you should flash this instead of the kdz, the answer is that with the "kdz way" you will upload your Bootloader too and you will lost the possibility to flash the twrp and any custom kernel since the new BL patch the exploit used by Bump.
DOWNLOAD
https://www.androidfilehost.com/?fid=95916177934553953
ROOT:
The rom is unrooted, to root it just flash this in recovery:
http://download.chainfire.eu/supersu
Credits:
- Team Codefire for the Bump exploit;
- Chainfire for the root stuff;
reserved
Thanks very much once again ?
Flashed this and everything seems ok so far. Supersu didnt work for me in the first flash with ROM, but when i got back into recovery the second flash worked. Root seems to be pretty strong thus far. I am going to run this for the next few days and see how stock Lollipop is working. Thanks again for this!
Ran for a couple minutes and noticed vibration doesn't work. Do I need to enable something? Pretty solid so far!
Edit: You have to reboot for vibration
Looking great for me so far ,no issues,though I have a lot of setting up to do still ?
Hello,
Very good rom
bye bye kit kat and external sd storage problems
Thank you very much for this rom
Fantastic! Thanks for the work and sharing.
Just flashed it dirty and seems to work flawless.
Major improvements over 4.4 are the "recents apps" button and being able to switch user without having to use hard power button.
Thank you for sharing this!
Can anybody answer me what's with battery, is it worse than on KitKat? And is gamma fixed?
Thank you one again! Cheers!
Sweet! Downloading right now, thank you!!
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
fazbender said:
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
Click to expand...
Click to collapse
Ok then
is it OK to flash over aosp 5.1? (with full wipes of course)
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
i think so, just take a backup in case something go wrong
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
I did. Full wipe worked fine.
Only issue I've noticed so far is the lockscreen weather doesn't seem to work.
I set it up as you would with the g3 but no luck.
Anyone managed to get it working?
For reference, I started with a completely wiped /formated tablet.
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
rom is running very smooth so far without any problems, living in germany. much faster as KK relase.
thank you dev!
Skin yoy are awsome!
Glad to see you here to.. Lg g3 owner mate congrats and keep doing your thing.... Thanks once again you great developer!!!!
renatohm said:
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
Click to expand...
Click to collapse
Yes.. Thats what i mean. But if you are on aosp rom you must wipe.
And with dirty flash you will not lose anything
Sent from my SM-N910F using XDA Free mobile app