there is a little issue on my phone i have searched it on the xda but its not help me so people solve my issue
i have common issue on my GT I9300 that camera faild to open only on any stock rom and works on the all custom rom ... i have tried everything bur not work i have clease cache factory reset head reset but camera is not working on the stock rom
i have not flashed the any custom kernel i just flashed the stock rom (Archi Beta ,s5 revolution, etc) but camera is not worked
please help me to solve this issue
thanks
Try with boeffla or reflashing stock kernel...you can download both from this page: http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16
Inviato dal mio GT-P3110 utilizzando Tapatalk
broken920 said:
Try with boeffla or reflashing stock kernel...you can download both from this page: http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16
Inviato dal mio GT-P3110 utilizzando Tapatalk
Click to expand...
Click to collapse
ok i am gonna try and report back
no brother is nots working ...its strange that the camera works fine on PA CM11 and all other custom rom but not work on the stock roms please help me
Have you ever done a deep clean before flashing stock or based on stock roms? It's very strange that camera works only AOSP rom.
Do a full wipe and format system and preload partitions before flashing ROM.
i have done deep clean brother many times i havce change the recovery many times but problem still there and now issue solved i have flashed the stock 4.3 firmware via odin and camera work now ..and now i will flash the archi port 4.4.2 beta1 rom and check that camera is work or not on that rom by the way thanks dear
And problem appear again when I flash archi port beta I thin the issue caused by archi port rom
Sent from my GT-I9300 using XDA Premium 4 mobile app
How to change the kernel of archi port that when I flash the rom the kernel flashed with the Ron instead of rom default kernel
Sent from my GT-I9300 using XDA Premium 4 mobile app
NOMIOMI said:
How to change the kernel of archi port that when I flash the rom the kernel flashed with the Ron instead of rom default kernel
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've never flashed Archiport so i dont't know how you can change kernel during flash.
Try NeatRom based on 4.3 or Imperium KK: you can install rom without kernel from aroma and flashing it after installation.
Other solution is:
1) wipe cache and dalvik
2) flash kernel
3) reboot and hope it works
its make me mad i have try every solution but not works and except you no one listen to me i have post on the archi port rom thread but i have got nothing form that thread the problem is in the rom i am sure i have replace the kernel form that rom and past the other kernel and flash but the problem still there
Related
I have installed the InteksKernel with my MIUI and now I'm getting a bootloop.
How can I fix this?
Thanks
Reflash.
Sent from my LT15i using XDA Premium
first reflash inteks kernel and wipe data in recovery then flash stock rom
princesupernoah said:
first reflash inteks kernel and wipe data in recovery then flash stock rom
Click to expand...
Click to collapse
Why stock if he using MIUI rom?
Sent from my MT15i using Tapatalk
i had this same bootloop problem about a month and a half ago, turned out i wasn't educated enough. Inteks kernel is not compatible with MIUI, that's why you're having a bootloop. Inteks kernel is for stock and SE.Tweaked, for MIUI use MIUI kernel.
for Neo, we must used kernel that given from custom ROM or we get boot loop.
Hey all
We were trying to flash stock rom on a friends i9100 mobile and stupidly we selected .pit file (yeah I know stupid ,,,,,) It was a mistake and now when we try to flash a rom, odin gets stuck at factory_fs.img. We have checked for brick sectors but everything seems fine.
By flashing a kernel we can boot into recovery, that is possible we have done this. if anyone can plz provide a nandroid backup for this mobile we can restore from that backup. I think that this will work. So please if anyone can help us plz
Regards
Bilal
Flash a custom kernel such as siyah or Dorimanx, boot in recovery, flash custom rom through recovery. Job done
Sent from my GT-I9100 using xda app-developers app
imlgl said:
Flash a custom kernel such as siyah or Dorimanx, boot in recovery, flash custom rom through recovery. Job done
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for you reply. I tried to help him flash Chameleon but it is not working. Any ROM that you would like to recommend, please ??
Maybe I am wrong but when we flashed earlier with the pit file, doesn't it mess up the partition ?? if that is the case will your method work ?? because all customs roms say ( if you are coming form this rom do this, coming from this rom do this and his mobile has nothing)
Thanks
solved, we flashed Resurrection rom and it worked then we flashed a stock rom.
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Yes you can, you're gonna have to root it tho.
Sent from my GT-I9100 using xda app-developers app
Thanks. Can I root present 2.3.6 Gingerbird and Install Custom Rom Omega v23 4.1.2 directly? Or I have to reinstall stock version 4.1.2 over current 2.3.6 Gingerbird?
Sent from my GT-I9100 using xda app-developers app
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am not getting it. Please spoon feed me. I will be in debt.
I tried following steps:
I download Omega V23 custom rom and kernel - PhilZ-cwm6-XWLSN-OXX-4.93.6-signed and placed it on SDCard. After going into stock recovery I applied Philz Kernel via Stock Recovery. But getting error in red-
E:Failed to verify whole file signature
E:Signature verification failed
Please give me any solution. I dont have enough previlage to post into Android Development Forum as I am newbee here.
Sent from my GT-I9100 using xda app-developers app
dg081081 said:
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
slimlo said:
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
Click to expand...
Click to collapse
Yepp..You are not getting it. System is running GingerBread with Stock Recovery. I can make backup in CWM recovery only. But right now my problem is that Philz Kernel is not installing. It will give me CWM Recovery and it will root the device. Any solution for above error??
Sent from my GT-I9100 using xda app-developers app
philz does not work on gingerbread ------------->>>> Philz
slimlo said:
philz does not work on gingerbread ------------->>>> Philz
Click to expand...
Click to collapse
Then I have to flash stock 4.1.2 firmware via Odin Am I right?
Sent from my GT-I9100 using xda app-developers app
No Service,After flashing Paranoid Rom.
I checked Baseband version.It shows Unknown.
So i flashed two 4.1.2 Baseband.But both did not work.
Then i flashed leaked JB 4.2.1 version ROM,Now All Service and Data Service working.
After that i rooted the stock rom and again i tried to flash PA rom.
This is also happening for CM rom.
But for other custom stock rom or temasek's UNOFFICIAL cm,it is working well.
Why?
Any solution?
I tried the same rom on another Galaxy S3.
Service was working well.
Mine and another s3 have same Baseband.
I did same steps to install for both headset.
Did you wipe your phone before installing the new rom?
Sent from my GT-I9300 using xda app-developers app
Wiped!
But no luck.
Sent from my GT-I9300 using xda app-developers app
svprm said:
Wiped!
But no luck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
same problem, reflashed stock from odin and bootlop
panicked then flashed slim bean 7 all fine. Trying reflash
_MirageX_ said:
same problem, reflashed stock from odin and bootlop
panicked then flashed slim bean 7 all fine. Trying reflash
Click to expand...
Click to collapse
I flashed stock rom.i tried to flash but no luck.
I think I need to completely reset my device.
For that do I need pit file?
Sent from my GT-I9300 using xda app-developers app
If you mess with Pit you are likely to have a brick .
Flash stock rom via Odin .
jje
don't mess with PIT, just reflash another working CM rom (like slim) and it should be fine. THen if you want re flash stock, but you should be fine anyway.
I'm with stock rom 4.3 (GNA8) and Boeffla Kernel 5.3 beta5
I want to test UltimaROM v17.0 Diablos BETA. The Boeffla Kernel for this rom is "Samsung JB 4.4.x kernel" version right?
Yes, use this one
http://forum.xda-developers.com/galaxy-s3/development/kernel-boeffla-kernel-5-2-27-03-2014-t1964572
Sent from my GT-I9300 using xda premium
Thank you.
Should I first install the kernel or the rom? Because I have a kernel for 4.3 and will install a rom 4.4.
You need V6 of Andi's kernel. First install the ROM and let it boot. There were issues with the cam when using a custom kernel without opening the cam with stock kernel one time after boot >> open cam one time, see if it works and then reboot to recovery and flash boeffla kernel. Then you are done.
Sent from my GT-I9300 using xda premium
Do you mean install a stock kernel, install ultimarom and then install the boeffla kernel v6? If so, what stock kernel do you suggest?
http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Series 6.x (JB 4.4.x)/6.0/
or beta
http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Test_jb44/
Andi is Lord Boeffla's real first Name
Stock kernel is the standard kernel which is included in UltimaRom and will be installed when you flash the ROM . Just install the ROM and let it boot after finishing.
Sent from my GT-I9300 using xda premium
Right
Wasn't a good combination for now. Crashes and excessive heat