Recently, i rooted my micromax a88 (Ver. 4.1.1) through kingo tool and after that i installed chainfire app. But after the reboot, it is stuck on the starting logo and nothing seems to be working. It is only showing the Recovery mode and the Factory mode when i start it with the volume up and down and power button pressed. I even did the factory reset, cleared cache but it still shows the start up logo and does not do anything beyond that.
I even tried connecting it to pc using USB cable but its not detecting my device but earlier it was showing up. On connecting it through USB cable its only charging the phone. Someone please help as i have tried searching the internet for resolution but it just not seems to be working.
amit12bara said:
Recently, i rooted my micromax a88 (Ver. 4.1.1) through kingo tool and after that i installed chainfire app. But after the reboot, it is stuck on the starting logo and nothing seems to be working. It is only showing the Recovery mode and the Factory mode when i start it with the volume up and down and power button pressed. I even did the factory reset, cleared cache but it still shows the start up logo and does not do anything beyond that.
I even tried connecting it to pc using USB cable but its not detecting my device but earlier it was showing up. On connecting it through USB cable its only charging the phone. Someone please help as i have tried searching the internet for resolution but it just not seems to be working.
Click to expand...
Click to collapse
Your device is softbricked ....[emoji13][emoji13][emoji13]
Flashing stock firmware is only The way to unbrick or restoring to working condition
So download stock firmware of your device
Bellow install drivers
Using flash tool flash firmware
Search in XDA for flashing guide.....am only giving you required files which is very hard to get
Links are overloaded and due to google limitations it may show download not available but keep trying you will get an opportunity to download for sure [emoji6]
Stock Firmware
https://docs.google.com/file/d/0B1Hf9FzDNVqDSEVLbWxMZGk4RG8/preview
Flashing Tool
http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A88/Tools/
Driver
https://drive.google.com/file/d/0B1Hf9FzDNVqDMlVGd3ZNUFFFYXc/edit?usp=sharing
If you need help using SP flash tool then you can see the video below
Related
So i post a lot of threads getting help of unblocking my phone, but the replies that is given won't work
[Heres all the info what i did with this phone]
My phone is an Lg p769 T-mobile(Bricked)V20H
All i did with this phone is rooted it, to get root access to moving files.
I have a Locked Boot loader.
I Accidentally installed chain fire 3d without knowing its not compatible with JellyBean.
So my problem is I'm stuck in boot loop.
when i turn it on its stuck on Lg logo. (No Security Error)
I am able to get into S/w upgrade mode but not Recovery mode.
My PC (Windows 7 Professional) won't detect my phone when in its in S/w upgrade mode. But it shows as LG modem
Device driver software shows my phone when connected as s/w upgrade mode as Unidentified Device - Unplugged
I installed the my phone driver from the Lg websites even the latest drivers 3.8
But still its not connected
I tried following guides to offline Flashing with lg mobile support tool to flash stock rom to my phone. but still my phone won't get detected
getting stuck on 15% when upgrading.
Adb also dosent detect my phone
all i need is to get anything to get my phone working even if i have to wipe everything.
i provided images to see what I'm getting when my phone is in s/w upgrade mode and connected to my pc
Sorry I'm for my bad english
Hey bro. Same deal happened with me. I got a bootloop with a root app. How i got it to work was through sw upgrade mode. You hold vol. up only, while plugging it in to your pc. Then you can do a recovery update, and it should work then. Message me if this doesn't work. Before this though, try a hard reset/wipe. That will wipe your phone, but so will the other solution i said. Hard wipe is vol -, power, home. Release after lg logo pops up.
Sent from my LG-P769 using XDA Free mobile app
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
dorian_nadaud said:
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
Click to expand...
Click to collapse
Flash this Stock recovery via odin : http://d-h.st/hcA
Instruction:
1) Put phone in download mode by powering off ,home button and volume down while plugging the phone into the computer(if don't and don't understand search google their are many guides and videos for it)
2) You should now see the first square in Odin turn yellow and say "Ready"
3) Click on the pda tab in Odin and select the Stock_Recovery_GT-I8552.tar you downloaded
4) Click start and wait for your phone to reboot
5) Done!
Well, I should have added that to the list of things that I have tried before. The only divergence to your methode is the fact that the keys to force start the downloading mode does not work so I only can acces it thrue a restart in downloading mode within CWM...
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
my GT-i8552 stuck in cwm boot looping
dorian_nadaud said:
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
Click to expand...
Click to collapse
I also have the same problem. I have read all threads from google about this matter, that say flash rom, clear whatever2, blaz bla
BUT, still for 3 days I cant fix it. when it stuck in boot looping or turn off, odin didnt recognise my phone
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Also: if Odin don't recognize your phone, try to change your usb cable
Changing PCs worked for me a while back.
not working
devesh9 said:
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
hi, i have install kies and odin. but with problem of cwm boot, pc/ odin/kies cant recognize my i8552 since it need to be turn on in normal mode. i have tried with another cable and port, as well as from pc to laptop, but still not recognize. pls help me
Does Odin recognize your phone when in download mode?
freitaz said:
Does Odin recognize your phone when in download mode?
Click to expand...
Click to collapse
not either. because my phone need to be turned on in normal mode when connect to my pc, then i need to choose the usb option whether to transfer files/camera/charging.
and only then Odin say "ready"
Do this: put your device in download mode and then you reflash firmware with Odin.
You can do this by turning your phone on pressing the buttons HOME, POWER and VOL DOWN. When your phone vibrates, release POWER and keep pressing ther other two. A screen with a warning will appear, and you press VOL UP to confirm. After that, you open Odin, plug your phone on computer and select the stock firmware by clicking on button "PDA" at Odin. And then it is just start and wait.
Same Problem
my samsung grand quattro get stuck at cwm too.. it keep booting to recovery mode when phone start up, I cant connect to Odin because I cant access to debugging setting.. HELP PLEASE :crying:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.
Hi,
My Samsung GT-N8000 was working perfectly a few months ago, then out of the blue I started it up to an error which says, "Encryption unsuccessful, encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset etc..." So naturally I tried entering into twrp recovery in bootup using the power button + volume down but for some reason I cannot access recovery, it just shows samsung galaxy logo TWICE and then proceeds to normal bootup which leads to the encryption unsuccessful message. (Download Mode still works tho...) So I tried using Odin to recover twrp but nooo ,Odin decides not to recognize my device.
I've tried every possible instructions I could find online but to no avail... So I've quickly created an account here just to post this query out of frustration. listed below are some the things I have already tried.
-Updated Samsung USB Drivers on my PC, Laptop and friends PC
- Using Odin on another PC
- Used 3 different USB Cords on my GT-n8000 but still the same.
-tried all the ports on my PC, Laptop and friends PC
PS I've flashed Lineage OS on my device and it was rooted.
Any help will be very much appreciated
Cheers! :good:
maybe get a keyboard and use the port on the keyboard insead
Archronin said:
Hi,
My Samsung GT-N8000 was working perfectly a few months ago, then out of the blue I started it up to an error which says, "Encryption unsuccessful, encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset etc..." So naturally I tried entering into twrp recovery in bootup using the power button + volume down but for some reason I cannot access recovery, it just shows samsung galaxy logo TWICE and then proceeds to normal bootup which leads to the encryption unsuccessful message. (Download Mode still works tho...) So I tried using Odin to recover twrp but nooo ,Odin decides not to recognize my device.
I've tried every possible instructions I could find online but to no avail... So I've quickly created an account here just to post this query out of frustration. listed below are some the things I have already tried.
-Updated Samsung USB Drivers on my PC, Laptop and friends PC
- Using Odin on another PC
- Used 3 different USB Cords on my GT-n8000 but still the same.
-tried all the ports on my PC, Laptop and friends PC
PS I've flashed Lineage OS on my device and it was rooted.
Any help will be very much appreciated
Cheers! :good:
Click to expand...
Click to collapse
release power button when the first galaxy logo pop up but keep Hold Volume down