hi .
i have the "Asus Transformer Pad TF103C" Tablet , and after i installed a game on in the tablet started to do reboot after reboot (with out being able to start).
since i can not start it , how can i factory restore it and make it start again ?
thx to all the helpers .
sagi_bb said:
hi .
i have the "Asus Transformer Pad TF103C" Tablet , and after i installed a game on in the tablet started to do reboot after reboot (with out being able to start).
since i can not start it , how can i factory restore it and make it start again ?
thx to all the helpers .
Click to expand...
Click to collapse
Hard to think that just a game would cause that to happen, but weirder things have happened...
I found this:
How to boot device into Safe Mode.
1. Press and hold the Volume - button and power button (while device is on).
2. When screen turns black release the power button, but remain holding the Volume - button.
Device should boot into safe mode.
If this works for you, then you should be able to boot the tablet with just the preinstalled apps available and then you should be able to uninstall the game in question and reboot normally.
es0tericcha0s said:
Hard to think that just a game would cause that to happen, but weirder things have happened...
I found this:
How to boot device into Safe Mode.
1. Press and hold the Volume - button and power button (while device is on).
2. When screen turns black release the power button, but remain holding the Volume - button.
Device should boot into safe mode.
If this works for you, then you should be able to boot the tablet with just the preinstalled apps available and then you should be able to uninstall the game in question and reboot normally.
Click to expand...
Click to collapse
it does not works.
should i press the volume up or down button ?
" Volume - " = " Volume down "
es0tericcha0s said:
" Volume - " = " Volume down "
Click to expand...
Click to collapse
maby i am doing somthing wrong but it does not work.
you understand that it does not start and is always in the loading screen .
http://forum.xda-developers.com/showpost.php?p=55074298&postcount=18
*shrug* Not sure what else to tell you... Doesn't the tablet restart itself after holding the power button for however long like every other tablet out there...?
es0tericcha0s said:
http://forum.xda-developers.com/showpost.php?p=55074298&postcount=18
*shrug* Not sure what else to tell you... Doesn't the tablet restart itself after holding the power button for however long like every other tablet out there...?
Click to expand...
Click to collapse
it does, but it want complete the reboot .
the reboot screen just keep reappearing over and over again .
sagi_bb said:
it does, but it want complete the reboot .
the reboot screen just keep reappearing over and over again .
Click to expand...
Click to collapse
this is how my bootload looks like . (volume up+power button when the tablet is off) .
as you can see there is no format or anything :crying:
Well I'm not sure what your bootloader screen, which you have to use the opposite Volume button to get to, has to do with getting into Safe Mode, but ok...
es0tericcha0s said:
Well I'm not sure what your bootloader screen, which you have to use the opposite Volume button to get to, has to do with getting into Safe Mode, but ok...
Click to expand...
Click to collapse
soory pic was added
sagi_bb said:
soory pic was added
Click to expand...
Click to collapse
Can you navigate to the Recovery option there? If so, your factory reset option should be there. I still think it would be able to boot into Safe Mode so you can just uninstall the offending app and not lose your data. But anyway, if those options don't work, you could try grabbing an update zip from Asus and see if applying that will get it going again.
http://www.asus.com/us/Tablets/ASUS_Transformer_Pad_TF103C/HelpDesk_Download/
What app did you install, by the way, so others might be warned against using it to avoid this situation...?
es0tericcha0s said:
Can you navigate to the Recovery option there? If so, your factory reset option should be there. I still think it would be able to boot into Safe Mode so you can just uninstall the offending app and not lose your data. But anyway, if those options don't work, you could try grabbing an update zip from Asus and see if applying that will get it going again.
http://www.asus.com/us/Tablets/ASUS_Transformer_Pad_TF103C/HelpDesk_Download/
What app did you install, by the way, so others might be warned against using it to avoid this situation...?
Click to expand...
Click to collapse
hi.
1) i dont remember the name of the game but it was some kind of flight simulator .
2) in the recovery screen i see an "open chest" droid with no options but a "no comand" massage .
3) i tried the safe mood again and it does not work . on the loading screen (the one with the asus logo in the middle and intel logo in the buttom) i press the volume - and the power button until the tablet shuts off the i keep pressing only the volume - and nothing hapen , after i release the volume button nothing hapen again .
4) i am not sure how to how to apply the update.zip from asus .
sagi_bb said:
hi.
1) i dont remember the name of the game but it was some kind of flight simulator .
2) in the recovery screen i see an "open chest" droid with no options but a "no comand" massage .
3) i tried the safe mood again and it does not work . on the loading screen (the one with the asus logo in the middle and intel logo in the buttom) i press the volume - and the power button until the tablet shuts off the i keep pressing only the volume - and nothing hapen , after i release the volume button nothing hapen again .
4) i am not sure how to how to apply the update.zip from asus .
Click to expand...
Click to collapse
Typically, in stock recoveries, when you see the Android guy there's usually a button combo to get the commands for reboot, reset, update, etc to pop up. Usually this would be like hitting the Volume keys together or some combo of Volume and Power buttons. Unfortunately, there isn't that much info about this particular Asus tablet as the TF300 and TF700 that I am more familiar with, so can't tell you with absolutely certainy how to do it.
es0tericcha0s said:
Typically, in stock recoveries, when you see the Android guy there's usually a button combo to get the commands for reboot, reset, update, etc to pop up. Usually this would be like hitting the Volume keys together or some combo of Volume and Power buttons. Unfortunately, there isn't that much info about this particular Asus tablet as the TF300 and TF700 that I am more familiar with, so can't tell you with absolutely certainy how to do it.
Click to expand...
Click to collapse
The OTA zip they supply doesn't appear to be able to installed via recovery, and they don't have a system.img for flashing. Here is my current thread on the issue.
http://forum.xda-developers.com/android/help/build-img-update-zip-ota-package-t2887847
Eclipse00 said:
The OTA zip they supply doesn't appear to be able to installed via recovery, and they don't have a system.img for flashing. Here is my current thread on the issue.
http://forum.xda-developers.com/android/help/build-img-update-zip-ota-package-t2887847
Click to expand...
Click to collapse
Sorry about the OTA zip, I didn't read it closely enough for the install instructions. I don't know why you think the system is gone seeing as how the stock recovery can't wipe that partition...?
es0tericcha0s said:
Sorry about the OTA zip, I didn't read it closely enough for the install instructions. I don't know why you think the system is gone seeing as how the stock recovery can't wipe that partition...?
Click to expand...
Click to collapse
i'm lost
Mash volume up and down and power when in recovery.
The options are there (I know as I have the same tab) but I can't remember the combination
You can try and sideload the zip via recovery (I couldn't get ghat to work, got the same error)
Factory Reset from the Asus Manual
Backup and Reset
Back up data, Wi-fi passwords,and other Google servers using your Asus Tablet.
To do this:
1. Go to Settings>Backup and reset
2. From the Backup and reset window, you can:
Factory data reset: Erases all data on the tablet
Press both volume buttons to access recovery commands, find reboot with volume keys, press power to select. Done
Power lead out, Power down, hold volume down and power on, release power on when "In search of the incredible" screen shows, use volume button to select "Recovery Mode".
When Android with open stomach shows and "No Command" press and hold volume up and power button for 3 - 5 seconds then use volume button to scroll to wipe cache / wipe data use power until to select.
If it doesn't work try again until it does.
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
Power lead out, Power down, hold volume down and power on, release power on when "In search of the incredible" screen shows, use volume button to select "Recovery Mode".
When Android with open stomach shows and "No Command" press and hold volume up and power button for 3 - 5 seconds then use volume button to scroll to wipe cache / wipe data use power until to select.
If it doesn't work try again until it does.
Related
Hi,
I'm new to xda, I was on CM10.1 nightly build 29th Dec, and I was just checking the dev options to see what was what. When I changed
the 'Simulate Secondary Display' settings the phone just froze. It's perfectly fine, everythings there, it's just that when I boot it, it shows the boot logo and when its about to show the home screen it freezes. I know its not bricked, and I know all I have to do is change the Dev Options. Could
someone plz tell me how? I actually have important messages and pictures that I don't want to lose.
Thanks in advance
meyou12345 said:
Hi,
I'm new to xda, I was on CM10.1 nightly build 29th Dec, and I was just checking the dev options to see what was what. When I changed
the 'Simulate Secondary Display' settings the phone just froze. It's perfectly fine, everythings there, it's just that when I boot it, it shows the boot logo and when its about to show the home screen it freezes. I know its not bricked, and I know all I have to do is change the Dev Options. Could
someone plz tell me how? I actually have important messages and pictures that I don't want to lose.
Thanks in advance
Click to expand...
Click to collapse
Simply re-flash the Rom once again without any wipes and see
Sun90 said:
Simply re-flash the Rom once again without any wipes and see
Click to expand...
Click to collapse
No luck It did the same thing again
meyou12345 said:
No luck It did the same thing again
Click to expand...
Click to collapse
I'm in the same situation. Anyone know of a solution?
inversechi said:
I'm in the same situation. Anyone know of a solution?
Click to expand...
Click to collapse
Flash a different rom like stock based custom rom and install cm10.1 again if you want to
Thankfully I had a fairly recent Titanium Backup so I only lost a small amount of data + time. I hope you manage to find a solution as you said you have important messages and all.
Wiping cache doesn't help. I'm still stuck. :crying:
--- Edited ---
My itchy hand touch that setting as well. Stuck at CM10.1 boot screen.
Solution: Just boot into recovery, wipe cache and reboot. Done and everything working as usual.
Same question
I wiped cache and davkit cache in recovery but no luck
I would like to know the function of this option
tltan86 said:
Wiping cache doesn't help. I'm still stuck. :crying:
--- Edited ---
My itchy hand touch that setting as well. Stuck at CM10.1 boot screen.
Solution: Just boot into recovery, wipe cache and reboot. Done and everything working as usual.
Click to expand...
Click to collapse
vioyrbr said:
Same question
I wiped cache and davkit cache in recovery but no luck
I would like to know the function of this option
Click to expand...
Click to collapse
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
lion0738 said:
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
Click to expand...
Click to collapse
thank you so much. this work for me
now can boot normal without wipe data
lion0738 said:
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
Click to expand...
Click to collapse
wow, it works, thank u so much! and for the first time I realise that android has a safe mode just like my windows ! feel shame for my poor knowledge
I couldn't enter safe mode. Presing Vol up+ Vol down should enter safe mode?
M3n0 said:
I couldn't enter safe mode. Presing Vol up+ Vol down should enter safe mode?
Click to expand...
Click to collapse
Yes. I just found this thread because i also locked my S2 activating "second display" and looked for a way to boot up in safe mode.
1. Turn off your phone by long pressing the Power button.
2. Press Up/Down Volume buttons (yes, both) and Power button at the same time.
3. Keep pressing all 3 buttons until boot-up image appears.
4. Release Power button while still pressing volume buttons (not sure if this is mandatory, but worked on my phone)
5. Phone will boot-up with "Safe-mode" badge in the lower-left corner of your screen.
Now go to Settings-Developer options and disable Second Display. After that, just reboot and you should be fine.
brotakul said:
Yes. I just found this thread because i also locked my S2 activating "second display" and looked for a way to boot up in safe mode.
1. Turn off your phone by long pressing the Power button.
2. Press Up/Down Volume buttons (yes, both) and Power button at the same time.
3. Keep pressing all 3 buttons until boot-up image appears.
4. Release Power button while still pressing volume buttons (not sure if this is mandatory, but worked on my phone)
5. Phone will boot-up with "Safe-mode" badge in the lower-left corner of your screen.
Now go to Settings-Developer options and disable Second Display. After that, just reboot and you should be fine.
Click to expand...
Click to collapse
amazing. i also didn't know you could boot into safemode. and i thought i was pretty well versed !
cheers to you sir
Dachozenwon said:
amazing. i also didn't know you could boot into safemode. and i thought i was pretty well versed !
cheers to you sir
Click to expand...
Click to collapse
confirmed dirty flash does NOT work
confirmed flash 10.1 nonofficial then re flash DOES work
anybody try a restore?? seemed to work for me except i only had an ancient one... plus the safe mode trick seems better unless you just made a backup
im on rezound infected 2.2 JB 4.2.2 by the way and safe mode didn't seem to work but i just read the part where you hold volume buttons after letting go of the power button. so that might work for rezounds still
lion0738 said:
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
Click to expand...
Click to collapse
I never realized safe mode existed before.. Thank you! I also changed simulate secondary display settings, and boot into safe mode solved it. Thanks again. Almost wiped my data..
Thank you
Thank you very much, you saved my life!
brotakul said:
1. Turn off your phone by long pressing the Power button.
2. Press Up/Down Volume buttons (yes, both) and Power button at the same time.
3. Keep pressing all 3 buttons until boot-up image appears.
4. Release Power button while still pressing volume buttons (not sure if this is mandatory, but worked on my phone)
5. Phone will boot-up with "Safe-mode" badge in the lower-left corner of your screen.
Click to expand...
Click to collapse
Seems not to work on HTC Desire Z. In a 3 seconds after holding volume buttons and power button, LED lights up in green and remains in this state. Using Jelly Baby 1.5.0.
Any other way?
EDIT: I found one. Turn on the phone and when on HTC logo, hold S button on QWERTY keyboard until home screen show up.
TheReduxPL said:
Seems not to work on HTC Desire Z. In a 3 seconds after holding volume buttons and power button, LED lights up in green and remains in this state. Using Jelly Baby 1.5.0.
Any other way?
EDIT: I found one. Turn on the phone and when on HTC logo, hold S button on QWERTY keyboard until home screen show up.
Click to expand...
Click to collapse
different phone, different method. the above applies to i9100.
glad you found a way for your HTC.
I wasn't able to boot into safe mode for some reason (HTC Evo with non-stock ROM). My solution was to use adb to edit the settings sqlite database.
Here is the guide I found: blog.jbit.net/2013/01/android-settings-reset-using-adb.html
So I tried rooting my alcatel t10 using this method http://forum.xda-developers.com/showthread.php?t=1886460 and after choosing normal, and the alcatel turned off, automatically turned back on, showed the logo now it's just a blank screen that's on, any help please?
Hi,
Can you enter stock recovery or bootloader ?
If you can,
did you try to clean cache or factory data/reset ?
XPACT123 said:
Hi,
Can you enter stock recovery or bootloader ?
If you can,
did you try to clean cache or factory data/reset ?
Click to expand...
Click to collapse
I'm very new with the Alcatel t10, can you tell me how to do any of those?
tails100 said:
I'm very new with the Alcatel t10, can you tell me how to do any of those?
Click to expand...
Click to collapse
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
XPACT123 said:
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
Click to expand...
Click to collapse
It doesn't appear, I tried looking for another method like sw update via sd card but I cannot find everywhere I look I cannot find the update.rar or something.
tails100 said:
It doesn't appear, I tried looking for another method like sw update via sd card but I cannot find everywhere I look I cannot find the update.rar or something.
Click to expand...
Click to collapse
Ok so phone was off, and holding power button + volume down (until that android appears or something) doesn't work ?
XPACT123 said:
Ok so phone was off, and holding power button + volume down (until that android appears or something) doesn't work ?
Click to expand...
Click to collapse
Yep it was off.
Edit: Tried it with - and the android with the belly showed up now I'm stuck at the android, pressing the - won't help, same goes for +.
Okay, after holding Vol down + Power while booting, you will see the android logo with damaged belly, during this time, press power and vol up at the same time, the menu shall appear.
tails100 said:
Yep it was off.
Edit: Tried it with - and the android with the belly showed up now I'm stuck at the android, pressing the - won't help, same goes for +.
Okay, after holding Vol down + Power while booting, you will see the android logo with damaged belly, during this time, press power and vol up at the same time, the menu shall appear.
Click to expand...
Click to collapse
Ok so did you clear cache ?
XPACT123 said:
Ok so did you clear cache ?
Click to expand...
Click to collapse
Didn't help, so I just did a factory reset.
XPACT123 said:
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
Click to expand...
Click to collapse
I tried following the instructions above but no android logo or icon is showing up. It only displays 'alcatel one touch' then 'loading' and then 'alcatel one touch' again. I was locked out of my device because of too many pattern attempts issue. I just want to hard reset my tab but i cant get to recovery mode. What else can i do? Need help pls.
---------- Post added at 03:17 PM ---------- Previous post was at 03:12 PM ----------
I know its off topic but i just need help to get to recovery mode/boot menu first
Good day!
I'm newbie here. I have a problem with my MSI Enjoy 7 tablet. It has been locked with too many patterns attempt and it asked me for my gmail account. After searching the web, the only solution I have is to flash my tablet. But I don't have any idea about that. How can I backup my ROM, Download the compatible firmware for my tablet and perform flash? Can anyone help me? Thank you!
Genue26 said:
Good day!
I'm newbie here. I have a problem with my MSI Enjoy 7 tablet. It has been locked with too many patterns attempt and it asked me for my gmail account. After searching the web, the only solution I have is to flash my tablet. But I don't have any idea about that. How can I backup my ROM, Download the compatible firmware for my tablet and perform flash? Can anyone help me? Thank you!
Click to expand...
Click to collapse
OK, I'm kinda new to these forums as well, although I do have a certain amount of experience with Android. The simplest way to unlock your device would be to factory reset it (this will erase all the data on your device though). Because you can't unlock the tablet to get to the Settings menu and do this the usual way, you'll need to do it from recovery. From a quick bit of Googling, this is how you get into recovery mode and factory reset from there on your device (note that I don't own an MSI Enjoy 7 so I can't verify this, but it's pretty standard stuff):
1. Make sure your device is completely switched off
2. Press power and volume down at the same time until an Android logo appears
3. Now release the two buttons before holding the power button and pressing the volume button ONCE (don't hold it) and a menu should appear
4. Release the power button and use the volume buttons to scroll to an option which goes something like this: "wipe data/factory reset"
5. Press power to choose this option and again use the volume buttons and power button to confirm (if it asks you).
6. Your device will be reset and unlocked! :good:
jackos2500 said:
OK, I'm kinda new to these forums as well, although I do have a certain amount of experience with Android. The simplest way to unlock your device would be to factory reset it (this will erase all the data on your device though). Because you can't unlock the tablet to get to the Settings menu and do this the usual way, you'll need to do it from recovery. From a quick bit of Googling, this is how you get into recovery mode and factory reset from there on your device (note that I don't own an MSI Enjoy 7 so I can't verify this, but it's pretty standard stuff):
1. Make sure your device is completely switched off
2. Press power and volume down at the same time until an Android logo appears
3. Now release the two buttons before holding the power button and pressing the volume button ONCE (don't hold it) and a menu should appear
4. Release the power button and use the volume buttons to scroll to an option which goes something like this: "wipe data/factory reset"
5. Press power to choose this option and again use the volume buttons and power button to confirm (if it asks you).
6. Your device will be reset and unlocked! :good:
Click to expand...
Click to collapse
Hi jackos2500! Thanks for the information about factory reset. But unfortunately my tablet has already no factory mode that's why I'm asking the other way (Backing up ROM, How to find compatible firmware and Android flash method). Much better if you can assist me on that!
Genue26 said:
Hi jackos2500! Thanks for the information about factory reset. But unfortunately my tablet has already no factory mode that's why I'm asking the other way (Backing up ROM, How to find compatible firmware and Android flash method). Much better if you can assist me on that!
Click to expand...
Click to collapse
Are you sure that there is no factory reset option in the stock recovery? There should be or else you wouldn't be able to factory reset it at all (even if you could unlock the device). Just to clarify, you don't need to be able to unlock the tablet to factory reset (at least that's the way it's been on every Android device I've ever used)
jackos2500 said:
Are you sure that there is no factory reset option in the stock recovery? There should be or else you wouldn't be able to factory reset it at all (even if you could unlock the device). Just to clarify, you don't need to be able to unlock the tablet to factory reset (at least that's the way it's been on every Android device I've ever used)
Click to expand...
Click to collapse
Alright man! Problem solved! After second attempt of web searching, I got the solution. You're right! I thought I lost my Factory Option because my tablet only display an Exclamation point inside a triangular shape with an android logo beside and no factory options to access. The web says that means the factory mode was already deleted and cannot be accessed anymore. But fortunately I got the true answer. I need to press again a combination of buttons in order to access the Factory Mode.
This is what I did:
a) Completely shut down the tablet first.
b) Press power button and volume up simultaneously and hold them for a while; then remove power button after 5 secs.
c) Wait for the green Android icon with a triangle and an exclamation mark to appear before removing the volume up.
d) Press the Power button and Volume up simultaneously for the Factory mode to appear. Remove both.
e) Here you are, the set up screen will appear, and you may proceed to do your selection.
Genue26 said:
Alright man! Problem solved! After second attempt of web searching, I got the solution. You're right! I thought I lost my Factory Option because my tablet only display an Exclamation point inside a triangular shape with an android logo beside and no factory options to access. The web says that means the factory mode was already deleted and cannot be accessed anymore. But fortunately I got the true answer. I need to press again a combination of buttons in order to access the Factory Mode.
This is what I did:
a) Completely shut down the tablet first.
b) Press power button and volume up simultaneously and hold them for a while; then remove power button after 5 secs.
c) Wait for the green Android icon with a triangle and an exclamation mark to appear before removing the volume up.
d) Press the Power button and Volume up simultaneously for the Factory mode to appear. Remove both.
e) Here you are, the set up screen will appear, and you may proceed to do your selection.
Click to expand...
Click to collapse
Nice, glad you got it sorted.
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset
Old LG G5 I had previously installed Lineage on. Was in a drawer until I decided to charge it up and let one of my kids play games on it. When I input the correct screen lock pattern, it goes black, then comes back to lock screen.
I am able to hold power button to then select power off, restart, etc. From power off, I power on and get the orange triangle recommending to lock the bootloader. But no combination of power and vol-down or power and vol-up will get me to TWRP. It just rolls right back in to Lineage.
Also, from power off, if I plug in to my Linux laptop, it will power on and go to fastboot.
Feels like USB debug got turned off and/or trust somehow got revoked, but I never had this laptop connected to it so probably doesn't matter. But like I said, my unlock pattern is working. I get different response with correct pattern versus incorrect.
I'm also able to see the phone from my https://google.com/android/devicemanager page. I tried to send a secure and erase thinking it might let me start from scratch, but I only see a notification that "Device Located" and it never does anything.
And finally, lsusb -v does see the phone, but adb devices never does.
My question is any idea how to get back to TWRP to wipe and push an updated image or even put an updated TWRP?
Try this ...
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Aimless Rambler said:
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Click to expand...
Click to collapse
That did the trick! Thanks a ton.
dwcasey said:
That did the trick! Thanks a ton.
Click to expand...
Click to collapse
Good to hear!