[Q] Wrong serial number after CM 11 install - Galaxy S III Q&A, Help & Troubleshooting

Hi everyone,
I just flashed my phone for the first time from 4.3 Stock to Cyanogenmod 11 (Snapshot M10) following these steps :
Using ClockWorkMod I backed up all my device.
In recovery mod I did a factory reset
I installed from sdcard the CM11 file
I installed from sdcard the GApps file
Reboot
After 1-2min, before I can do anything (reconfigurate my "new" phone"), I have to log on my phone via SIM's PIN.
Even with the right PIN, I have a "login on the network" screen and can't do anything.
At this point, I though it would be a network (modem ?) issue
I disconnected the SIM and rebooted the phone and here is what I figured out :
IMEI is OK (the same on both Stock and CM11)
Serial Number is broken (different from Stock)
I've searched on the forums but I couldn't find some people with the same problem : generally IMEI and Serial Number are both broken
I have no clue how to restore the serial number only.
Would a EFS restore do the trick ?
For information, I don't know if that's relevant : my device is a Samsung Galaxy SIII i-9300, and I live in France, using Orange as provider.
Thank you for your help
PS : I just restored my phone via the backup I did. All works fine (but I'm back on 4.3 :/ )

There are problems with the recent CM11. Try another CustomRom: AOKP-, Omni-or TW-based.

First flash full stock room with Odin, if serial not recovered then restore your efs backup.
Once it's all working again then start custom flash again.

Related

[Q] GT-i9300 Connectivity issues with baseband

Hi guys,
This is my first thread and I've just recently began rooting and flashing roms etc.
I'm sorry if this is a duplicate thread but I searched the forum and found nothing. Here's the thing:
I have a Samsung GT-i9300 ( international version ) and after the first flash I lost my efs folder.
Which did not only mess up my IMEI. It messed up bluetooth, connectivity, wifi adress and the phone lost it's identity.
I took it to a " technician " who said he could fix it. He restored my imei, but the network wouldn't work. So he put another IMEI and voilá!
The phone had connectivity and worked perfectly. So he told me that my phone's imei was reported as stolen because the network wouldn't let it connect. ( and I have had this phone since it first came out of the box and I never reported such a thing. )
He then said the police would have to be involved to verify if i'm the owner so I just told him to put a new imei on.
When I picked up the phone it was working fine. Full connectivity. Then I flashed a rom and lost my efs folder again.
Luckily I had a backup of the imei, wifi, serial and bluetooth adresses. Which were sucessfully restored.
But still, no connectivity. So I googled it and finally found a solution! The problem is with the Baseband.Basically the phone lost it's baseband files, without which the phone cannot connect to the network, and when the " technician " restored my imei, he copied the whole EFS file from the dead phone. Which then replaced the missing files and the phone worked. So my IMEI wasn't blocked, my EFS file was corrupted and the baseband files were missing.
I used the Ariza patch. And voilá, the connectivity is back. But after being turned on for about an hour, the phone has a pop up which says it's not registered in the network and it must restart with a valid sim. And it's a no option pop up, you are indeed forced to restart your cell phone which is annoying because it shuts off at night and operations that take more than an hour are impossible.
But still, after 2 days, the ariza patch stopped working. The phone is in Emergency Calls only now and it doesn't detect the sim. But it's not blocked, it connects to the network.I read that you could flash the modem files to fix this aswell. So I downloaded the modem file for my phone, from my carrier ( VODAFONE PORTUGAL ), from one of the threads here. It didn't work.
Now, this is the question:
Is it possible that it didn't work because my new EFS file is from a phone based in the UK and my phone is from Portugal?
Can it be a sim software problem?
Also, is there any solution found other than the obvious which I've already exhausted ( flash stock rom, wipe cache, etc )
Thank you an Advance guys!

[Q] IMEI null and SIM not recognized, nothing works

Hello,
My phone: GSMART Roma R2 (Rooted)
I know there are a lot of threads how to restore IMEI but none of them worked when I dial up *#06#, it shows message with two lines containing "null".
I was using MIUI rom for a while and suddenly after I rebooted phone SIM was no longer recognized (before reboot I was playing with SWAP couldn't make it work so I uninstalled BusyBox (could that cause the issue?))
I already tried:
Engineering Mode: Displays "AT command is failed to send"
Terminal Emulator: Doesn't work
MAUI 3G: Flashing new IMEI changed nothing.
MTK Droid Tool - Changing IMEI did nothing.
SN Writer: Writing new IMEI changed nothing BUT when I choosed to read IMEI it successfully displayed both IMEI in the textbox. (So it looks like the IMEI actually is registered on the phone but phone doesn't seem to use it)
Manually writing MP0B_001 to NVRAM: Nothing changed.
I have used backup in CWM recovery to stock ROM, didn't work, then I did factory reset, didn't work, flashed back the stock recovery and installed update from Gigabyte site, didn't work. So basicly now my phone has stock rom, stock recovery, factory reseted and is rooted.
Thank you very much for any answers because I just fell hopeless about fixing my phone
I fixed it using solution here: http://forum.xda-developers.com/showthread.php?t=2599459
Scroll down to post with NVRAM backup, I used that backup to fix it and then just changed the IMEI numbers to my IMEI numbers.

Problems with EFS and emergency calls only (have efs backup)

Hi
TL;DR section
My phone has message Emergency calls only after flashing a stock rom, even with IMEI number correct (I think it's correct, see below for more details), even after restoring /efs. Looking for a possible solution.
/tl;dr
Previously I had problems with IMEI 0049 and Emergency calls only, but a user from other forum corrected this with remote using of SamsungTool (because previously I didn't make efs backup)
After this my phone was working good and I made an efs backup using EFS Professional 2.1.80
Then I wanted to flash twrp (2.8.6.1) recovery (using Odin 3.09) and then flash Archidroid 1.7.18 (with modem update function included in this rom)
In twrp there was a message saying unable to mount /efs, I wiped data,cache etc and tried to flash Archidroid, but it stops with this error:
"Operation not supported on transport endpoint script aborted: set_metadata_recursive: some changes failed set_metadata_recursive: some changes failed Installer Error"
(full log in attachment)
Then i decided to go back to stock (I9300XXUGNG3_I9300XEOGNG1_I9300XXUGNA8_HOME.tar.md5) because previously on stock everything was OK
After flashing this rom with Odin, message Emergency calls only returned...
I asked my friend to use remote repair once again, and again it works - my S3 was able to make calls and Emergency calls only messagedissapeared).
I decided to try to flash Archi 1.7.18 once again, but first - flash I9300XXUGNG3_I9300XEOGNG1_I9300XXUGNA8_HOME.tar.md5 with Odin.
After done this, message Emergency calls only returns, even if I try to restore backup in EFS Pro, the message still appears
Imei no (*#06#) is correct
I tried to format EFS in EFS Pro, but get message "failed:Invalid argument (I was hoping to format, and then restore previously made backup)
Do you have any ideas what is causing Emergency calls only message (with correct IMEI number) and why it returns after flashing anything, even stock rom?
Message dissapears only when my friend remotely use Z3x and phone is working ok as long as I stay on stock rom
EDIT:
I think that it may be still problem with IMEI
Using *#06# it gives me correct IMEI number (same as on sticker), but when I enter service mode using *#197328640# (Version info -> Sw version -> Read IMEI) it displays: IMEI: Not supported
EDIT
Could this solution fix my problems?:
http://forum.xda-developers.com/galaxy-s3/help/emergency-calls-solved-t2748393
will try it when I get back from work

need help to restore my IMEI

hi Guys,
First, I apologize for that I'm doing the hundredth post on this topic
and secondly, I apologized for my "google translator english" (unfortunately I can not so good English because I am from Germany)
to my problem
I had the "Cyanogenmod 11 nightly" ROM on my Samsung Galaxy S 3. By the time the system was slow and I have flashed the latest CyanogenMod Rome via Odin on my phone. After the reboot, I had no connection to the mobile network, my serial number consisted entirely of zeros and my IMEI was not like it is in the battery compartment.
I have now spent several days trying to find a solution but for all IMEI Restore tutorials have not brought with me. Unfortunately, I did not know much about even before the Android system per se and the EFS folder and have therefore no backup.
I tried the IMEI
restore the NV_data.bin + NV_data.bin.md5 method​Result: IMEI was still so wrong seem right that my IMEI is no longer located in the System​
restore with the downgrade to a German MG6 Android version​Result: IMEI was still not right​restore using tools like QPST + nv ReaderWriter or EFS Professional​Result: EFS Professional -> Qualcomm NV Tools (after efsprofesional the mobile phone has put into the correct USB mode) -> connect to my phone broke off as soon as I wanted to read or write
QPST + nv ReaderWriter -> gave me appear not correct port on my phone
all the drivers I have installed clean and tidy. After further investigation, I found out that I need a special UARTcable this (and maybe a Z3X Box or something similar?)​
My question is
How can I get now establish a new nv_data.bin file that includes my right IMEI
or whether (if it is really expensive) someone is so net and created me such a file
my Hardware is Samung Galaxy s 3 (i9300) (unbranded) (may u need this too: i bought it in germany)
I only want my own IMEI and I do not think out a like or I like to personally via PN or so to sample photos (for example, a predetermined word from the person) and the battery compartment of the phone with the IMEI
for I illigalität knows that it is illegal but not his own restore its IMEI change, because you paid a lot of money for his mobile phone and the IMEI is jointly contain. Who's afraid these publicly to write here because this information could be misused can I enjoy writing via private message. I would be very happy
Now im trying again to solve my problem with this Tutorial -> https://www.youtube.com/watch?v=XT42ri37RBU
my preperations:
im installing now a fresh windows 7 on my Laptop​
i flashed I9300XXUGNG3_I9300DBTGNG2_I9300XXUGNA8_HOME.tar.md5 (SGS3 Stock Firmware DBT with android 4.3) downloaded with the SamFirm tool from http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647​
i rooted my phone with Odin3 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5​
i put the usb debugging on (settings > options > about device > [clicked 7 times on Buildnumber] that activates the developer menu and i put usb debugging on in settings > options > developer options > usb debugging)​
i´ll post the results
dont work for me becouse "ONLY for US variants. It DOES work on Qualcomm CPU and DOESN'T work on Galaxy International Version with Exinos CPU!"
someone maybe got antoher way to fix it?
@sLeCks:
1. Flash last firmware with Odin (again), go to recovery immediatly and do factory reset.
2. If 1. doesn't help, try Ariza patch.
3. If 2. doesn't help, let it repair by Samsung-service (cheap).
Firmware Update dont restored IMEI (got still 0049 imei)#
Ariza patch wont help it just restore the baseband (like written in the Thread "wont help if u goot a 0049 imei)
maybe it works if someone got a i9300 (intl) (exynos NOT Qualcomm) and a z3x-box or another. i send him my right imei-number he backup his efs folder and create the right nv_data.bin file for me. then he send it to me via email or he put it on uploadet in ecample. i download it in put it on my phone and restore my imei.
maybe i think is a full efs.img backup file better xD. if this way work it would be the best i think.
Ißve called some mobile reperature stations an mony of then dont do an imei-restore. i got one and go now to him maybe he can help. but if someone got a box and a old sgs3 i would be sooooooo happy if he could help me.

Samsung S6 (G920F) SIM Card Problem after custom ROM flash

Hi,
Recently I have upgraded my S6 from android 6 to 7 and after the flashing was complete, I got an error message with DRK. So I run into Youtube for some solutions and at last I could fix that with flashing a Root file (https://shell.boxwares.com/Download.aspx?L=5772). It worked but ran into this SIM Card problem. It cannot detect the SIM and always says EMERGENCY CALLS ONLY. I did no back up for EFS. but my phone shows the IMIE and dialing *#0011# in the first steak IMIE says NG. Baseband is G920FXXU6ERF6. Before I was flashing the device the binary version was 5. So I tried binary 5 but did not work. So, I had to Flash binary 6.
What would be the solution for this? Please Help....
All SIM-card related stuff is stored in /EFS.
jwoegerbauer said:
All SIM-card related stuff is stored in /EFS.
Click to expand...
Click to collapse
What Should I do now to solve the issue?

Categories

Resources