It would be good to write which cases can work with this charger.
example 1: I use this charger with that case (spigen, slimpack, puregear,...) and works perfectly
example 2: I try with that case (verus, tudia, caseology,...) and charging was bad
BrunoSlivar said:
It would be good to write which cases can work with this charger.
example 1: I use this charger with that case (spigen, slimpack, puregear,...) and works perfectly
example 2: I try with that case (verus, tudia, caseology,...) and charging was bad
Click to expand...
Click to collapse
Please search around there's another OP with the same question and answers.
I look but didn't found. I found for universal chargers but i ask for this one. Because i think to buy one and it is not cheap to test with my case.
BrunoSlivar said:
I look but didn't found. I found for universal chargers but i ask for this one. Because i think to buy one and it is not cheap to test with my case.
Click to expand...
Click to collapse
That is true, however there are quite a few posts regarding this charger in there.
Anyway I have the WCD-100 and it works well with my Cruzerlite cases. The Spigen slim armor is too thick and it charges very slow if at all. The same problem occurs with the Spigen ultra hybrid that I have. I would recommend a thin hard case or a TPU case. The qi standard is to charge from up to 7mm so you also have to account for the thickness of the charging stand and backplate. This leaves minimal room 3-4mm thickness for a case which isn't a lot.
I use slimpack case
http://youtu.be/VWnQClFQCVg
I think that it will be big problem to use this charger. Because case have two parts.
Someone else?
The Casemate Barely There case works well with the wcd-100
http://www.ebay.de/itm/251615373482...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I have this bumper but sell it because camera is not safe.
WDC-100 + Ringke Fusion - charging works, although it's slow charging mode
Related
Hi guys.
I currently have a case from mobile fun that has s-view and qi charging. it is good but the screen is scratched and has seemingly made scuff marks on the phone screen also. at least i have a screen protector on.
i dont really utilise the benefits of the s view like music from the home screen etc and as soon as it moves slighlty off centre the full screen shows below so i lose the s view screen.
so, i want a case, not just a replacement back that has qi charging but not a flip cover/s view.
do they do them and are there any recommenations?
Bump
marc.knuckle said:
Bump
Click to expand...
Click to collapse
Glad you had a screen protector.
For the case you're looking for, I don't think so. Most people on here are using Qi insert receivers. Mine works fine. Use what ever case you want.
SladeZero said:
Glad you had a screen protector.
For the case you're looking for, I don't think so. Most people on here are using Qi insert receivers. Mine works fine. Use what ever case you want.
Click to expand...
Click to collapse
It's it easy to use a qi insert? Which is a good one, i read a lot about over heading with them.
I like the spigen slim armour case, any experience with it?
Cheers for the help
marc.knuckle said:
It's it easy to use a qi insert? Which is a good one, i read a lot about over heading with them.
I like the spigen slim armour case, any experience with it?
Cheers for the help
Click to expand...
Click to collapse
This thread has a lot of info... a lot.
I never tried that case, I use an insert with the Spigen Neo hybrid... works well... The insert is ineffective 5mm away from the charge pad. 1mm is taken from the insert and the backcover of the pphone... that leaves you with 4mm. Your case needs to be less than 4mm thick. I think the slim armour meets this.
Happy hunting.
SladeZero said:
This thread has a lot of info... a lot.
I never tried that case, I use an insert with the Spigen Neo hybrid... works well... The insert is ineffective 5mm away from the charge pad. 1mm is taken from the insert and the backcover of the pphone... that leaves you with 4mm. Your case needs to be less than 4mm thick. I think the slim armour meets this.
Happy hunting.
Click to expand...
Click to collapse
thanks for this.
i will have a look at the neo hybrid as well.
any recommendations on which receiver? i have looked at this http://www.amazon.co.uk/Expower-Ult...1400697088&sr=1-1&keywords=qi+receiver+note+3
marc.knuckle said:
thanks for this.
i will have a look at the neo hybrid as well.
any recommendations on which receiver? i have looked at this http://www.amazon.co.uk/Expower-Ult...1400697088&sr=1-1&keywords=qi+receiver+note+3
Click to expand...
Click to collapse
Looks good to me...
This is the receiver i have:
http://www.amazon.co.uk/Ultra-thin-Wireless-Charging-Receiver-Samsung/dp/B00GFGL0XE/ref=pd_cp_ce_0
Not sure what the nfc does for the charger.
Check out the thread I posted earlier... and then you can make a decision on the charger. I got something cheap and stylish for my nightstand but works fine.
SladeZero said:
Looks good to me...
This is the receiver i have:
http://www.amazon.co.uk/Ultra-thin-Wireless-Charging-Receiver-Samsung/dp/B00GFGL0XE/ref=pd_cp_ce_0
Not sure what the nfc does for the charger.
Check out the thread I posted earlier... and then you can make a decision on the charger. I got something cheap and stylish for my nightstand but works fine.
Click to expand...
Click to collapse
Cheers mate
Self explanatory title.
I'm choosing a good protection case for LG that work with the LG WCD-100 charger.
I almost buy the Spigen Slim Armor, but then i read that it doesn't work it.
Can you indicate a good option to me??
Thanks
Its not a WiFi charger its a qi charger. The total distance that qi is rated for is 7mm so between the back of the phone, case and charger that's the maximum it can charge through going off the qi standard.
rafaelw said:
Self explanatory title.
I'm choosing a good protection case for LG that work with the LG WCD-100 wifi charger.
I almost buy the Spigen Slim Armor, but then i read that it doesn't work it.
Can you indicate a good option to me??
Thanks
Click to expand...
Click to collapse
See these websites
http://ausdroid.net/product/official-lg-g3-slim-hard-case-with-wireless-charging-black-2/
http://ausdroid.net/product/official-lg-g3-slim-hard-case-with-wireless-charging-burgundy/
press thanks if I helped you.
@SidDev said:
See these websites
http://ausdroid.net/product/official-lg-g3-slim-hard-case-with-wireless-charging-black-2/
http://ausdroid.net/product/official-lg-g3-slim-hard-case-with-wireless-charging-burgundy/
press thanks if I helped you.
Click to expand...
Click to collapse
thanks bro, i already saw these cases, but i'm looking for something like Ballistic Tough, Spigen Slim Armor, Case-Mate Tough, and others
I want to choose something beautiful and with strong protection, and with working qi charger
Pilz said:
Its not a WiFi charger its a qi charger. The total distance that qi is rated for is 7mm so between the back of the phone, case and charger that's the maximum it can charge through going off the qi standard.
Click to expand...
Click to collapse
thanks, corrected!
rafaelw said:
thanks, corrected!
Click to expand...
Click to collapse
No problem, I know it's hard to measure and know how far the qi coil is from the phone, so if the slim armor is too thick the odds are you will need a thinner protective case that will hold up just as well.
Ive been wireless charging my g3 with an otterbox defender on it for a week now
Using tylt vu charger
Sent from my LG-D851 using XDA Free mobile app
rafaelw said:
thanks bro, i already saw these cases, but i'm looking for something like Ballistic Tough, Spigen Slim Armor, Case-Mate Tough, and others
I want to choose something beautiful and with strong protection, and with working qi charger
Click to expand...
Click to collapse
oh I didn't knew you already seen these.
so I posted to help you on my side.
go some google search you may find it more easily than here
all the best.
@SidDev said:
oh I didn't knew you already seen these.
so I posted to help you on my side.
go some google search you may find it more easily than here
all the best.
Click to expand...
Click to collapse
And i dont know if im wrong,but what i see is that these cases from LG arent real cases, just back covers to chamge the original back cover (protecting the battery) with a more rugged back cover with qi support on it.
Let's talk about cases and wireless changing - what works and what doesn't:
For example
Works
Generic charging back and cheap gel case works with Tylt charger
Generic charging back and cheap gel case works with LG hockey puck charger
Otterbox defender works with the tylt vu and qi sticker
Nillkin bumper case works with the Tylt wireless charger
Slim Armor works with the Tylt Vu
Qi sticker chip with generic eBay hockey puck (Powerbot clone) and it charges with Seidio Surface
Qi sticker (from GB) on OEM backing with Quick Circle Case (without the built in inductive) works on both the Tylt Vu as well as the LG WCP-300 puck.
Ringke slim case and with the 3 Coil wireless pad+original LG USB cable+2A Samsung charger (links in post #21)
but
Doesn't work
slim armor DIDNT work with Nokia Dt910
Works partially
3rd party quick circle case with wireless charging I got off of Ebay and ordered the WCD-100. Although it worked I kept
getting the center phone correctly message every time I put it on.
Best Buy Insignia TPU case has some trouble with the Tylt Vu. Wireless charging notification pops up frequently
How about posting here what we know works - and what doesn't. I'll update here from your posts so please make my life easier and give me something that I can just cut and paste.
cb1111 said:
Let's talk about cases and wireless changing - what works and what doesn't:
For example
Generic charging back and cheap gel case works with Tylt charger
Generic charging back and cheap gel case works with LG hockey puck charger
but
Does the generic charging back and the Tylt work with the Otterbox Defender? How about the Seidio Surface?
How about posting here what we know works.
Click to expand...
Click to collapse
You forgot about the Qi sticker chips for those who purchased.
I have a Qi sticker chip with generic eBay hockey puck (Powerbot clone) and it charges with Seidio Surface.
Overall, I think wireless charging will work with any case so as long there is no interference such as magnets or something.
My otterbox defender works with the tylt vu and qi sticker
Sent from my LG-D851 using XDA Free mobile app
My slim armor DIDNT work with Nokia Dt910. Had the on off issue. Ordered a lg wcd100 will see what happens.
EDIT : forgot to add that i got the slow charging message when using the case.
I have a 3rd party quick circle case with wireless charging I got off of Ebay and ordered the WCD-100. Although it worked I kept
getting the center phone correctly message every time I put it on. Returned that to Amazon and ordered the Tylt. If I continue to have
problems with that one when I get it then I'll know it's the case that's the issue.
This thread will be hard to follow just like the "What wireless charger works best with the G3" thread. I had to read that thread over and over. lol A list in the OP would be nice but a little time consuming to make I guess.
Nillkin bumper case works with the Tylt wireless charger. I will test the Insignia case at some point.
sweets55 said:
This thread will be hard to follow just like the "What wireless charger works best with the G3" thread. I had to read that thread over and over. lol A list in the OP would be nice but a little time consuming to make I guess.
Nillkin bumper case works with the Tylt wireless charger. I will test the Insignia case at some point.
Click to expand...
Click to collapse
Good point. I'll update the firtst post every couple of days.
xlxcrossing said:
My slim armor DIDNT work with Nokia Dt910. Had the on off issue. Ordered a lg wcd100 will see what happens
Click to expand...
Click to collapse
Doesn't matter if you use no case, the Nokia DT910 will do that with this phone.
Gvndeb60 said:
Doesn't matter if you use no case, the Nokia DT910 will do that with this phone.
Click to expand...
Click to collapse
Could you let me know if the slim armor case work with the wcd-100 wireless charger?
Slim Armor works with the Tylt Vu.
Best Buy Insignia TPU case has some trouble with the Tylt Vu. Wireless charging notification pops up frequently.
sweets55 said:
This thread will be hard to follow just like the "What wireless charger works best with the G3" thread. I had to read that thread over and over. lol A list in the OP would be nice but a little time consuming to make I guess.
Nillkin bumper case works with the Tylt wireless charger. I will test the Insignia case at some point.
Click to expand...
Click to collapse
cb1111 said:
Good point. I'll update the firtst post every couple of days.
Click to expand...
Click to collapse
sweets55 giving the OP more work? LOL.
OP: have fun updating the post every so often. I've been in that position before. Lol. Also, you didnt update first post with my post in regards to Seidio Surface working.
iazybandit said:
sweets55 giving the OP more work? LOL.
OP: have fun updating the post every so often. I've been in that position before. Lol. Also, you didnt update first post with my post in regards to Seidio Surface working.
Click to expand...
Click to collapse
It should cut down on the same questions and not everyone has time to read a long thread. If OP didn't want to do it I could have done it
Maybe the OP also needs to add "a case and charger might work for someone and not another person. I guess depending on the sticker/placement".
j76ms said:
Best Buy Insignia TPU case has some trouble with the Tylt Vu. Wireless charging notification pops up frequently.
Click to expand...
Click to collapse
I have the same combo and seems to be working fine for me. I'll try another charge tonight.
iazybandit said:
sweets55 giving the OP more work? LOL.
OP: have fun updating the post every so often. I've been in that position before. Lol. Also, you didnt update first post with my post in regards to Seidio Surface working.
Click to expand...
Click to collapse
I apologize for not updating the first thread within microseconds of someone posting - sheesh.
In order to make this thread worthwhile, we really need more information on some of the more obscure combinations. Stickers, for example, can come from multiple vendors and each may be a different quality. I'd suggest adding a link for no-name products. I'll continue to update the first post every couple of days for a while until we have a good representation of products.
I am using this OEM rear plate.
I am also using the Best Buy Insignia TPU case.
The charger is the Tylt Vu.
The Tylt works fine without the case on the phone but has trouble with this case.
Slim Armor works with the Qi sticker and the Amazon Cheotech charger....
cb1111 said:
I apologize for not updating the first thread within microseconds of someone posting - sheesh.
In order to make this thread worthwhile, we really need more information on some of the more obscure combinations. Stickers, for example, can come from multiple vendors and each may be a different quality. I'd suggest adding a link for no-name products. I'll continue to update the first post every couple of days for a while until we have a good representation of products.
Click to expand...
Click to collapse
It was a joke. Calm down. And my comment about the Seidio was because you updated the original post with stuff that was posted after mine and thought you missed it.
As for the Qi sticker chips, there's only one source that makes them but obviously sold by many others.
Just got my official LG qi charger WCD-100. I really like it, it's stable, and charges quite fast for qi. I got it for a pretty good deal so I don't mind and this is my 3rd qi charger that i currently have and by far the best one. It's really nice because I can't place my phone on it the wrong way. You just put it on and you're done! No alignment bs like on my other ones.
Qi sticker (from GB) on OEM backing with Quick Circle Case (without the built in inductive) works on both the Tylt Vu as well as the LG WCP-300 puck.
Just got my ultra today. I also got 2 cases delivered. Both of these cases neither one of them has a cutout for the charging dock ports. i have the dock and obviously want to use a case that i can use on the dock.
can anyone recommend a hard or tpu type case that will meet my needs? no idea why these cases wouldn't have the proper cutouts
I've just bought an Incipio Watson case which also doesn't have a cut-out for the magnetic connector.
I plan to spend two minutes this evening with a craft knife fixing the problem!
Philip said:
I've just bought an Incipio Watson case which also doesn't have a cut-out for the magnetic connector.
I plan to spend two minutes this evening with a craft knife fixing the problem!
Click to expand...
Click to collapse
yeah, i was hoping it wouldn't come to that but i guess it may. it seems the only case i can find online with the proper holes ships from china.
can't get anything from amazon now with the proper holes shipped quickly, i bought what they had. sucks.
knives of ice said:
Just got my ultra today. I also got 2 cases delivered. Both of these cases neither one of them has a cutout for the charging dock ports. i have the dock and obviously want to use a case that i can use on the dock.
can anyone recommend a hard or tpu type case that will meet my needs? no idea why these cases wouldn't have the proper cutouts
Click to expand...
Click to collapse
I finally broke down and ordered one of these.
http://octilus.us/made-for-xperia-case-xperia-z-ultra-bimat-black.html
Have to order from overseas but it does have the dock/charger cutout.. I payed $21.11 shipped
kable said:
I finally broke down and ordered one of these.
http://octilus.us/made-for-xperia-case-xperia-z-ultra-bimat-black.html
Have to order from overseas but it does have the dock/charger cutout.. I payed $21.11 shipped
Click to expand...
Click to collapse
i ordered this, at least it sure looks to me like it has the correct cutouts based on the pics
http://www.amazon.com/gp/product/B00FGYT6WS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
You could try the Nillkin fresh series. I didn't really like the plastic back but what i like is the screen cover and that it has a cutout for the magnetic charging port.
Unfortunately, just because a case has the cutout, doesn't mean it works. this is the one I've got and while it fits in the DK30 dock (with the bigger inlay), the problem is that the dock has the phone sitting at an angle and I can't get the magnet to "grip".
I tried my best modding the thing to fit, didn't work out. So good luck with yours, please report back if you've been lucky enough to find something that works.
I also use the magnetic charging port for charging. I found the following TPU case. I purchased one in smoke, and liked it so much I then purchased another one in black. Works great. Highly recommended!
The item is: Black Matte TPU Silicone Gel Case Cover For Sony Xperia Z Ultra XL39h C6802 on eBay
Sold by mobilethink
(I'd list the direct link, but I am not allowed as someone who hasn't posted enough). I hope this helps.
just got my 4th case today. this is far and away the best i've gotten
http://www.ebay.com/itm/181400289992?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
has all the charging ports and the grip on the sides is awesome. i have the other cases recommended in this thread as well. i like this the best by far.
jb8von said:
I also use the magnetic charging port for charging. I found the following TPU case. I purchased one in smoke, and liked it so much I then purchased another one in black. Works great. Highly recommended!
The item is: Black Matte TPU Silicone Gel Case Cover For Sony Xperia Z Ultra XL39h C6802 on eBay
Sold by mobilethink
(I'd list the direct link, but I am not allowed as someone who hasn't posted enough). I hope this helps.
Click to expand...
Click to collapse
Thanks for the info on the case, I have the same case that I bought more by luck than judgement when I bought my Z ultra.
Please could you let us know if the case works with:
A.) The official magnetic dock
B.) A magnetic charging cable
C.) Both of the above
Cheers,
Rob
Rob, this case works with the charging cable. I'm not sure if it works with the charging dock as I don't own one. I hope this is (somewhat) helpful.
Good luck,
Josh
Thanks Josh, I'm going to order a cable for my shiny new toy
Cheers,
Rob
After dropping my beautiful phone and getting the corner peeled I decided to look for this exact combo; a case with a charging dock connection cut out that works with a magnetic cable. As you guys already know the charging port flap becomes pretty flimsy after a while and I did not want to risk it breaking.
After much trial and error I found a combination that works.
This cable:
http://www.aliexpress.com/item/Magn...agnetic-USB-cable-charger-for/1708094470.html
Works perfectly with this case:
http://www.ebay.com/itm/NILLKIN-Ult...Cell_Phone_PDA_Cases&var=&hash=item1e945842a2
The Nillkin case itself is pretty good but I'm also pretty sure that this cable will work with other cases that have a similar cutout. The magnetic connection from the cable is not that strong but gets the job done.
Thanks for post a working combo
R
knives of ice said:
just got my 4th case today. this is far and away the best i've gotten
http://www.ebay.com/itm/181400289992?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
has all the charging ports and the grip on the sides is awesome. i have the other cases recommended in this thread as well. i like this the best by far.
Click to expand...
Click to collapse
Looks better than the $2 ones. How much bend does this have? How soft vs rigid?
Merry Christmas everyone I got a Nexus 6 today as an early gift to celebrate Christmas and I love it. Are there any cases or charging pads that are powerful enough to be able to charge wirelessly with the case on?
What cases do you guys use? Also, I am a huge Buffalo Bills fan (they let me down on Sunday ) and are there any good custom cases that I can design the Bills logo on?
I have a unicorn beetle and it works on my moms ****ty verizon wireless charger. Not sure if its the chargers fault or the phones, but the charger sure looks cheap... It charges @ 500mA
scryan said:
I have a unicorn beetle and it works on my moms ****ty verizon wireless charger. Not sure if its the chargers fault or the phones, but the charger sure looks cheap... It charges @ 500mA
Click to expand...
Click to collapse
Is your case a unicorn beetle pro or premium?
reagan1998 said:
Is your case a unicorn beetle pro or premium?
Click to expand...
Click to collapse
Premium I guess... Just the normal one.
mine chargers fine on my cheap amazon wireless charger through the caseology case. nfc payments read ok too, not great but they work eventually.
What kind of caseology case? With the bumper?
I use a Spigen Ultra Hybrid case on mine - does everything I need (bumper surround to protect the phone, clear see-through back, slightly proud at the front to protect the screen when the phone is face down). I also use an IntelliArmor tempered glass screen protector.
The Spigen works fine with all my Qi chargers, both desk and car (I have quite a few, as I was trying lots of them when I first got the phone).
(Once you use Qi charging you'll never want to go back. I was all ready to buy a 6P, but the lack of wireless charging was a deal breaker for me).
Philip said:
I use a Spigen Ultra Hybrid case on mine - does everything I need (bumper surround to protect the phone, clear see-through back, slightly proud at the front to protect the screen when the phone is face down). I also use an IntelliArmor tempered glass screen protector.
The Spigen works fine with all my Qi chargers, both desk and car (I have quite a few, as I was trying lots of them when I first got the phone).
(Once you use Qi charging you'll never want to go back. I was all ready to buy a 6P, but the lack of wireless charging was a deal breaker for me).
Click to expand...
Click to collapse
I'll second this. I'm also using the Spigen Ultra Hybrid with my Nexus 6, and I have absolutely no issues with all three of my Qi chargers. To be perfectly honest, I've found that I prefer the convenience of my Qi chargers over the speed of my quick chargers. Don't get me wrong, I still use my quick chargers when I need a speedy boost, but I love just being able to set my phone down and not having to pick up a cord and plug it into my phone.
Verus Thor and slim
Sent from my Nexus 6 using Tapatalk
Wirelessly charge mine every night with this one http://www.amazon.com/gp/aw/d/B017O..._rd_t=36701&pf_rd_p=2068141862&pf_rd_i=mobile
I, too, have the Spigen Ultra Hybrid case.
I've used it so far with the CHOETECH Iron Qi stand, as well as the Spigen F300W Qi stand.
With both of them, Ampere reports that the phone is charging at 620 to 700ma.