Hi everyone. If anyone can help I would greatly appreciated. I cannot update to KITKAT whatsoever the only thing that runs is Jelly Bean 4.3 (JWR66Y) (with radio v.48 from older version android image (v S4.2.2 (JDQ39).Screen and digitizer was replaced from ebay) Here are the things I tried after 2 weeks of searching and trying things: I tried all the developer FACTORY images from v4.4--- AND-up with same result ===stuck on bootloop google animation. bubbles but not willing to boot into kitkat
-Fastboot flash-all.bat loaded flashed OKAY ---result: stuck on google kitkat bubble animation
-Wugs Nexus root toolkit will flash but ---------still stock on kitkat bootloop animation
-WorkClockMOd sideload also same results stuck still in bubble animation but doesn't load kitkat
Jelly Bean factory image v 4.3 works fine and stock 4.2 also OR WITH RADIO FROM v.4.2 will update to 4.3 but that is as far as I could go
I did this while rooted/unrooted and I think I tried everything with not much luck(still stuck on boot animation bubbles)
USB/sdk, platform tools and all the files necessary are operational so no issues on that side.
I SHOULD MENTION THAT ON V 4.3 THE OTA UPDATE TO 4.4 NOTIFICATION SHOWS UP BUT WHEN I TRY TO INSTALL IT, IT GIVES ME THE ERROR IN THE IMAGE I ATTACHED OR IT JUST LOADS HALF WAY AND THEN IT SHOWS ME THE ANDROID WITH RED EXCLAMATION MARK!
pls HELP
I took apart phone and realized that the proximity sensor was unplugged (forgot to plug it back in) that was causing the error. All OTA updates now work!
AttilaHun80 said:
Hi everyone. If anyone can help I would greatly appreciated. I cannot update to KITKAT whatsoever the only thing that runs is Jelly Bean 4.3 (JWR66Y) (with radio v.48 from older version android image (v S4.2.2 (JDQ39).Screen and digitizer was replaced from ebay) Here are the things I tried after 2 weeks of searching and trying things: I tried all the developer FACTORY images from v4.4--- AND-up with same result ===stuck on bootloop google animation. bubbles but not willing to boot into kitkat
-Fastboot flash-all.bat loaded flashed OKAY ---result: stuck on google kitkat bubble animation
-Wugs Nexus root toolkit will flash but ---------still stock on kitkat bootloop animation
-WorkClockMOd sideload also same results stuck still in bubble animation but doesn't load kitkat
Jelly Bean factory image v 4.3 works fine and stock 4.2 also OR WITH RADIO FROM v.4.2 will update to 4.3 but that is as far as I could go
I did this while rooted/unrooted and I think I tried everything with not much luck(still stuck on boot animation bubbles)
USB/sdk, platform tools and all the files necessary are operational so no issues on that side.
I SHOULD MENTION THAT ON V 4.3 THE OTA UPDATE TO 4.4 NOTIFICATION SHOWS UP BUT WHEN I TRY TO INSTALL IT, IT GIVES ME THE ERROR IN THE IMAGE I ATTACHED OR IT JUST LOADS HALF WAY AND THEN IT SHOWS ME THE ANDROID WITH RED EXCLAMATION MARK!
pls help.
Click to expand...
Click to collapse
I found with my Nexus that it worked much better to run the fastboot commands manually.
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312 - Check out "D" and the red text after it.
es0tericcha0s said:
I found with my Nexus that it worked much better to run the fastboot commands manually.
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312 - Check out "D" and the red text after it.
Click to expand...
Click to collapse
Thank you, I'll try this now.
AttilaHun80 said:
Thank you, I'll try this now.
Click to expand...
Click to collapse
when i took phone apart I forgot to plug the proximity sensor back in (while replacing screen) after I plugged it back in phone works fine all updates 4.4.4.
Related
hi ive got a droid razr with a problem it restarts every 4 minutes it just
-boots
-loads system
-apparently pick up signal (2 seconds)
-BAM! .. reboot
i did full wipe, restore with RSD (.211 ics) updated to .215 and nothing
it stills reboots, BUT, if i load the bootloader and enter in
BP HW DIAG & BOOT AP
it works perfectly, except for usb storage, i also changed the sim card (im using it on Mexico with GSM bands) and nothing, changed the microsd and nothing
then i installed a jb rom (compatible with ics kernel) "WIZZED BEAN RLS7" http://forum.xda-developers.com/showthread.php?t=1936084 and the phone doesnt rebooted but i cant send SMS texts and i dont get data
i tried another roms but nothing only WIZZED BEAN RLS7 rom "worked"
so i only can use the phone with:
1: BP HW DIAG & BOOT AP (but no usb connection, even for charge, nothing)
2: WIZZED BEAN RLS7 (but no sms and data)
i tried updating the phone to the JB OTA Leak but i always get this error
assert failed: motorola.motoflash("/tmp/bp.img")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation Aborted
--------------------------------------------------
I DONT KNOW WHAT TO DO! can anyone help me?
i attached some info i got from the phone (if yo need more just tell me)
wtf anyone cant help me? im the only who happens this?
JnX777 said:
wtf anyone cant help me? im the only who happens this?
Click to expand...
Click to collapse
Were you able to fix your phone. My phone is in the same situation and I need help. I dont want to throw this beauty out. I love it.
Same problem here
trsiddiqui1989 said:
Were you able to fix your phone. My phone is in the same situation and I need help. I dont want to throw this beauty out. I love it.
Click to expand...
Click to collapse
Hi.
I have same problem with stock rom on 4.1.2.
I use the phone on gsm network in Romania (VF).
My phone do same like above:
- boot
- load system
- in 80 % of cases, reboot after pick-up network signal
I manage to root my phone and to install safestrap on it and to try to install some custom roms.
All rom above 4.2.2 work on my phone. I have some issues with all rom (screen rotation is not working) but my phone works.
Is any way to make stock rom to work?
Thanks.
staycanuca said:
Hi.
I have same problem with stock rom on 4.1.2.
I use the phone on gsm network in Romania (VF).
My phone do same like above:
- boot
- load system
- in 80 % of cases, reboot after pick-up network signal
I manage to root my phone and to install safestrap on it and to try to install some custom roms.
All rom above 4.2.2 work on my phone. I have some issues with all rom (screen rotation is not working) but my phone works.
Is any way to make stock rom to work?
Thanks.
Click to expand...
Click to collapse
i have same problem as you guys..
may i know which custom rom did you use..?
i've tried Cyanogen 4.4.4 and 5.0.2 ROM but still no data service..
thanks..
I used some 4.2 custom roms and 4.3.
I tried some roms with all I picked up signal but all have various problem.
Hello everyone!
I'm having some trouble right now, My phone was updated with the AT&T update because my phone prompted me about the update. I updated my phone and successfully updated the phone. I installed all of my backup apps from Titanium back, but when I restarted my phone after the apps were installed my phone booted up but said that NFC stopped working dailer stopped working,basically everything was not working - i couldnt even do anything with the phone. What I did was I tried doing a factory reset via TWRP but it didn't work. I also cleared the Dalvik and Cache but didnt work either.
I locked my bootloader and thought I would flash the RUU for my device. everything went fine untill the RUU displayed an "unknown bootloader version". I tried downloading the RUU again but it didnt seem to work.
I installed Elegancia through ADB install went through perfectly untill I reboot into the phone the HTC screen with the white background does not go anywhere. I occasionally get a pop up that says "stopped responding would you like to stop the program". I downloaded the Mongoose custom rom for my phone, again install went fine no problems. but once again when I boot into the phone I still get stuck on the HTC white background. This time the phone has a black screen with the status bar with the icons of the battery time and an x on the signal icon then the phone restarts.
What is going on with my phone? How can I reinstall an OS and get my phone working again?
any help would be greatly appreciated!
Since you have done the update, you will have to flash the ROM of this thread, everything you need to know is in this post.
Lucky Thirteen said:
Since you have done the update, you will have to flash the ROM of this thread, everything you need to know is in this post.
Click to expand...
Click to collapse
Thank you so much it worked perfectly!!
Any reason why the other ROMS didn't work?
Glad it work!
Please edit your OP title and write : [Solved] Any way to bypass HTC setup screen? Stuck on HTC logo all white.
I have installed Android 4.3 from occam image downloaded from Google to my Google Nexus 4. The phone has been rooted and set up with TWCR.
The problem is that every week or so the phone thinks there is an OTA OS update from Google: a notification icon pops up telling that an "update to Android 4.3" has been downloaded (update size 1.8M). The update "installs" in a second, boots into TWCR which offer to repairs root access (and I do), and then boots normally. There is no that "optimizing app N of M" lengthy process as with a real OS upgrade.
I confirmed that the build incremental version in /system/build.prop does not change; in fact, the build fingerprint is not changed by this "update":
Code:
ro.build.fingerprint=google/occam/mako:4.3/JWR66V/737497:user/release-keys
Why does this happen and what may I try to do to prevent this?
same issue happened yesterday with my phone
andorkin said:
same issue happened yesterday with my phone
Click to expand...
Click to collapse
My wife's all stock Nexus 4 with Android 4.3 got an update notification today, and run an upgrade that did not change anything in the "About phone" page. Unlike mine, thought, it did the "Optimizing application X of Y" step after a reboot.
So maybe there was a systemic glitch which just coincided with my phone re-flash? This explanation would hold if I do not see any more of these "updates" coming in the next few weeks.
Hi kkm000
today I unroot my phone and flash stock recovery and then successfully installed the update.
version of the build changed from JWR66V to JWR66Y
After updating to the OTA 4.3 my S3 now has a glitch causing the screen to occasionally black out, mostly during phone calls but also after screen timeouts when i hit the power button to turn the screen back on it'll stay black for awhile, the menu and back buttons light up and the touch sensor still works even when black. it work flawlessly before the update. I tried to root and was successful at it using the saferoot method but because of the know being lock I can not install a custom rom or recovery and the problem was still there because I was still using the 4.3 rom. So I used odin3 vs3.07 and put the stock rom back on and unrooted and the problem is still there. does anyone know how to fix this glitch or does anyone know how i can go back to the 4.2.1 rom or install the 4.4.2 rom because 4.3 has been nothing but a headache for me.
johnwilliams-84 said:
After updating to the OTA 4.3 my S3 now has a glitch causing the screen to occasionally black out, mostly during phone calls but also after screen timeouts when i hit the power button to turn the screen back on it'll stay black for awhile, the menu and back buttons light up and the touch sensor still works even when black. it work flawlessly before the update. I tried to root and was successful at it using the saferoot method but because of the know being lock I can not install a custom rom or recovery and the problem was still there because I was still using the 4.3 rom. So I used odin3 vs3.07 and put the stock rom back on and unrooted and the problem is still there. does anyone know how to fix this glitch or does anyone know how i can go back to the 4.2.1 rom or install the 4.4.2 rom because 4.3 has been nothing but a headache for me.
Click to expand...
Click to collapse
Wrong forum my friend >> http://forum.xda-developers.com/galaxy-s3-verizon <<
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Did you manage to find a stock 4.4.2. ROM?
I'd need it as well cause my M7 came with 4.2.2 and i'd like to update it while I did not find any OTA update to the 4.4.2 release so far (don't know if OTA even works cause it says error connecting to the network even though it also says the system is uptodate).
Should you still need the stock 4.4 ROM, there are a couple of members in this thread http://forum.xda-developers.com/showthread.php?t=3089024 who got sent a 4.4 m7 firmware, you could try it out with a backup from them.
M7 flashing
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Hi,
I got X01 today...I would like to flash it ...but how to do it? How to switch the watch into flash mode? There is no volume buton as on ordinary mobile. And how to put the watch in recovery mode? Which button or how to switch the watch.
Thank you very much in advance for assistance..
Regards
Filik
I have a backup of stock room if neededfirst thing I did was take a nand backup