Hi All!
Since this is my first tutorial, I am asking xda-developers' seniors' permission to post this.
I managed to root and install ROM on my P780, and I notice that there is no simple tutorial to root or/and install CWM and ROMs, so I thought why don't I do my own simple tutorial, especially for beginners like me?
1. ROOTING
Actually, rooting is simple for this phone. I used Framaroot for my phone. Thanks to Alephzain (search Alephzain framaroot in xda-developers forum). Just download Framaroot 1.6.1 from his tutorial, install it, and follow the instruction. Simple.
2. CWM
I know there's a lot of easy ways out there, but I used Mobileuncle for mine. Open PlayStore, search for Mobileuncle MTK Tools, download, install. You can get many CWM 6.1 img type out there for P780 (sorry I'm denied to post links), put it inside your SDcard. Then, open Mobile uncle, tap Recovery update, find your img file name. To find out there's CWM installed, just reboot to CWM when finished, or press volume up + volume down + power button when phone turned off.
3. ROM
I managed to find many available roms in needrom site. Some use CWM and some use Flashtool. I don't know, but I failed all ROMs that use CWM, so I'll tell you how to use Flash tool.
First, download flashtool and MTK drivers on your PC (I use Windows 7). Then, download your desired ROMs or stock ROM. There are direct links in the needrom site. Just register to see the links.
Install MTK drivers first. Then run Flashtool. click scatter-loading. Find MT6589_Android_scatter_emmc.txt in the downloaded ROM folder. Make sure DA DL All With Check Sum box is checked. Click firmware upgrade. Turn off phone. Connect via USB.
Wait until finished. (Green Circle Pop Up Window). Done. Restart phone.
Hope it helps. Press thank if I helped.
zainal2adidin said:
Hi All!
Since this is my first tutorial, I am asking xda-developers' seniors' permission to post this.
I managed to root and install ROM on my P780, and I notice that there is no simple tutorial to root or/and install CWM and ROMs, so I thought why don't I do my own simple tutorial, especially for beginners like me?
1. ROOTING
Actually, rooting is simple for this phone. I used Framaroot for my phone. Thanks to Alephzain (search Alephzain framaroot in xda-developers forum). Just download Framaroot 1.6.1 from his tutorial, install it, and follow the instruction. Simple.
2. CWM
I know there's a lot of easy ways out there, but I used Mobileuncle for mine. Open PlayStore, search for Mobileuncle MTK Tools, download, install. You can get many CWM 6.1 img type out there for P780 (sorry I'm denied to post links), put it inside your SDcard. Then, open Mobile uncle, tap Recovery update, find your img file name. To find out there's CWM installed, just reboot to CWM when finished, or press volume up + volume down + power button when phone turned off.
3. ROM
I managed to find many available roms in needrom site. Some use CWM and some use Flashtool. I don't know, but I failed all ROMs that use CWM, so I'll tell you how to use Flash tool.
First, download flashtool and MTK drivers on your PC (I use Windows 7). Then, download your desired ROMs or stock ROM. There are direct links in the needrom site. Just register to see the links.
Install MTK drivers first. Then run Flashtool. click scatter-loading. Find MT6589_Android_scatter_emmc.txt in the downloaded ROM folder. Make sure DA DL All With Check Sum box is checked. Click firmware upgrade. Turn off phone. Connect via USB.
Wait until finished. (Green Circle Pop Up Window). Done. Restart phone.
Hope it helps. Press thank if I helped.
Click to expand...
Click to collapse
nice and deep explanation, thanks for your sharing
I really hope this smartphone gets developers attention
lenovo or some others gift reputed developers like ravi kiran cg a lenovo p 780. i really want to buy this phone but no developer support for it is a great bummer.
i am about to buy this phone...i do hope we could help each other out in improving this phone support
If u from malaysia and can read malay, u can copy all my P780 tuto's here
http://www.lepakspot.com/showthread.php?pid=3567#pid3567
More to come just need more support from P780 users
Edit: i only share the stable official ROW 119 (world) rom in it
ROM
Has somebody tried this
ht_tp://kitkatjellybeanj.blogkats.com/2013/09/upgradeupdate-lenovo-p780-to-44-kitkat.html
deepakanto said:
lenovo or some others gift reputed developers like ravi kiran cg a lenovo p 780. i really want to buy this phone but no developer support for it is a great bummer.
Click to expand...
Click to collapse
That's what I'm saying. It looks like the only long-use device with developer support are the MAXX line of devices from Motorola. But those are all Verizon exclusive, and I'm on T-Mobile here in the US. Also, the older devices use OMAP chips, which have also lost almost all support from everyone.
zainal2adidin said:
Hi All!
2. CWM
I know there's a lot of easy ways out there, but I used Mobileuncle for mine. Open PlayStore, search for Mobileuncle MTK Tools, download, install. You can get many CWM 6.1 img type out there for P780 (sorry I'm denied to post links), put it inside your SDcard. Then, open Mobile uncle, tap Recovery update, find your img file name. To find out there's CWM installed, just reboot to CWM when finished, or press volume up + volume down + power button when phone turned off.
Click to expand...
Click to collapse
Thank you for your tutorial !
I have a problem on Step 2, I open Mobileuncle, download the P780 CWM image, reboot, but everything is in Chinese :|
How can I find an english version ?
L.E. Found it here:
http://www.lepakspot.com/showthread.php?pid=3567#pid3567
encik_racun said:
If u from malaysia and can read malay, u can copy all my P780 tuto's here
http://www.lepakspot.com/showthread.php?pid=3567#pid3567
More to come just need more support from P780 users
Edit: i only share the stable official ROW 119 (world) rom in it
Click to expand...
Click to collapse
You have a great tutorial there, but if it's not too much to ask, can you post also an english version of it (google translate does a pretty poor job)?
I can offer support as P780 user
Hi Guys... Will it support Indian languages?
translation
zangaby said:
You have a great tutorial there, but if it's not too much to ask, can you post also an english version of it (google translate does a pretty poor job)?
I can offer support as P780 user
Click to expand...
Click to collapse
I just completed this guide's translation; simply follow the original link to the forum post on LepakSpot.com and locate it there.
encik_racun said:
Here u go hxxp_//www_dot_lepakspot.com/showthread....d=3567#pid3567
Click to expand...
Click to collapse
Hope this is helpful... :laugh:
Help with P780 bootloop
I realize this is long, but I thought it best to be as specific as possible....
A 'little' history:
I'm fairly used to working with Android but would only consider myself an intermediate user. That said, I'm an experienced PC/Linux user and am not afraid of terminals etc. All things considered, I made a pretty lame mistake while tired one evening.
I own a Lenove P780 and rooted it using Framaroot (because I was seriously tired of getting dangerously low on storage due to only 4 gb internal; 8gb not available in Indonesia). However, on this ROM version (P780_ROW_S115) there wasn't an option to install to extsd, so I needed a program to do so. I used Link2sd but needed to repartition my sd card first in order to do continue. I used Aparted to create a 1gb swap file (amazing what this did for my RAM usage), 4gb ext3 install partition and the rest simple storage formatted using FAT32 (it's a 32 gb Sandisk Extreme). Then, I moved almost all of my downloaded apps and a few included apps to the external sd ext3 partition. Sweet, no more space issues.
I then installed a CPU governor, can't remember the name off hand now. Set a number of parameters and found further performance benefits, especially battery usage. Following that, I then installed ROM Manager Lite. Nice tool. Now is the point when I really wanted to make a back up of my ROM, so I attempted to install CWM or TWRP recovery using ROM Manager Lite's update/download section to no avail. I ended up using MobileUncle to do the trick; found out the version of TWRP that many forums stated worked with the P780 (2.5.0.0 if I'm not mistaken), copied it to the root of the extsd card and installed with MobileUncle. All great so far...
Until I went to make a back up. When in the graphical interface of TWRP while ROM running there was the option to back up to internal or external, I ticked external. It then rebooted into the actual recovery UI, however eemc was the only option to back it up to and it stated the external sd had 0MB. I tried this many times and still the same issue; can't make back up and external not recognized. Google to the rescue. Found out that perhaps it could be an issue with improperly formatted storage cards. I had to assume since I have 3 partitions on the card, that it can't read the storage one. In order to test the theory, I was about to buy a new card, format it to FAT32 with that being the only partition on it and attempt a back up. However, before I had the chance to do that, I decided to try a provided Recovery in MobileUncle. I thought I had chosen a ROW version but I obviously hadn't and turns out it was a Chinese one... Man, if only I were a bit more patient (read: not so stupid)...
Anyway, of course you already know the scatterfile ect. is different from ROW and now I'm stuck in bootloop. I've studied my options and am going to use Flashtool but have a question before I do any more damage... He..he..he... Should I simply use the official ROM from Lenovo (I have ROW_s115 and can only find official ROW_s119 online; no OTA updates available prior to this mishap in Indonesia) and only tick the Recovery box in Flashtool, or can I simply load the s119recovery.img, tick the Recovery box and go for it? I assume that it would be better to use the full stock ROM instead of simply using the Recovery.img in Flashtool considering it may need to redo the filesystem as well... Not sure really. What do you think would be best? Also, would the recovery in the stock ROM P780_ROW_s119 be the same as the stock ROM s115?
Any expert (or any) advice would be very appreciated... Thanks in advance!
Michael
hi i have a problem with my p780
I followed step 1 was fine
Step 2 all right, then reset growth
and does not start, there is logo "Lenovo" stay 3-4 sec and disappears and then appears again and so dont start
I tried to volume up + volume down + power button and so dont start
I managed to get only in factory mode* just as it is in Chinese and fail
you can help Please
"sorry for my english or sorry my english"
Bulegila said:
I realize this is long, but I thought it best to be as specific as possible....
A 'little' history:
Any expert (or any) advice would be very appreciated... Thanks in advance!
Michael
Click to expand...
Click to collapse
I dont know if you are really "bule" or it's just a nickname, but if you are really a bule and as you said you live in Indonesia, i assume you know Bahasa Indo even just a little maybe you can check at
www.kaskus.co.id
and search keyword "Official Lounge Lenovo P780" or
on Facebook groups "Lenovo P780 Indonesia". You can get plenty stuff there.
Hit thanks if I helped you even just a slight.
Sent from my Lenovo P780_ROW
Does anyone have any functional utility to repartition internal storage for asia version (for Lenovo P780 / MTK6589)? For world version i know function utilities.
bulegila
anchaz_al_ayaz said:
I dont know if you are really "bule" or it's just a nickname, but if you are really a bule and as you said you live in Indonesia, i assume you know Bahasa Indo even just a little maybe you can check at
Xxx_kaskus_co_id
and search keyword "Official Lounge Lenovo P780" or
on Facebook groups "Lenovo P780 Indonesia". You can get plenty stuff there.
Hit thanks if I helped you even just a slight.
Sent from my Lenovo P780_ROW
Click to expand...
Click to collapse
Iya, saya memang bule yang tinggal di Indonesia dan situs Web itu akan tolong banyak, pasti. Terima kasih. Masalah P780 sudah akhirnya selesai dengan bantuan dari lepakspot.com yg tadi dalam post encik_racun. Saya udah translate guide dari bahasa Indo ke Inggris di website tersebut.
If anyone that is restricted to using English needs some help upgrading to ROW_119, the guide and it's translation can be found from the link in the following quote:
encik_racun said:
If u from malaysia and can read malay, u can copy all my P780 tuto's here
hXXpwww_lepakspot_com_showthread....d=3567#pid3567
More to come just need more support from P780 users
Edit: i only share the stable official ROW 119 (world) rom in it
Click to expand...
Click to collapse
Lenovo P780 8Gb custom rom
Links here
https://www.facebook.com/groups/229759483863558/
If somebody need good recovery, try this: http://d-h.st/5U4
It is Carliv Touch Recovery 2.2. - They have some function as TWRP, some as CWM (6044).
In this zip are two zip with different version of CTR. First is for asia base rom (as s135, s125, etotalk, etc.), second is for world base rom (s119, s110, etc.). I personaly ported/tested in my P780 with miui, lewa, viberom and Sxxx stock version.
---------- Post added at 12:12 AM ---------- Previous post was at 12:03 AM ----------
Bulegila said:
I realize this is long, but I thought it best to be as specific as possible....
A 'little' history:
I'm fairly used to working with Android but would only consider myself an intermediate user. That said, I'm an experienced PC/Linux user and am not afraid of terminals etc. All things considered, I made a pretty lame mistake while tired one evening.
I own a Lenove P780 and rooted it using Framaroot (because I was seriously tired of getting dangerously low on storage due to only 4 gb internal; 8gb not available in Indonesia). However, on this ROM version (P780_ROW_S115) there wasn't an option to install to extsd, so I needed a program to do so. I used Link2sd but needed to repartition my sd card first in order to do continue. I used Aparted to create a 1gb swap file (amazing what this did for my RAM usage), 4gb ext3 install partition and the rest simple storage formatted using FAT32 (it's a 32 gb Sandisk Extreme). Then, I moved almost all of my downloaded apps and a few included apps to the external sd ext3 partition. Sweet, no more space issues.
I then installed a CPU governor, can't remember the name off hand now. Set a number of parameters and found further performance benefits, especially battery usage. Following that, I then installed ROM Manager Lite. Nice tool. Now is the point when I really wanted to make a back up of my ROM, so I attempted to install CWM or TWRP recovery using ROM Manager Lite's update/download section to no avail. I ended up using MobileUncle to do the trick; found out the version of TWRP that many forums stated worked with the P780 (2.5.0.0 if I'm not mistaken), copied it to the root of the extsd card and installed with MobileUncle. All great so far...
Until I went to make a back up. When in the graphical interface of TWRP while ROM running there was the option to back up to internal or external, I ticked external. It then rebooted into the actual recovery UI, however eemc was the only option to back it up to and it stated the external sd had 0MB. I tried this many times and still the same issue; can't make back up and external not recognized. Google to the rescue. Found out that perhaps it could be an issue with improperly formatted storage cards. I had to assume since I have 3 partitions on the card, that it can't read the storage one. In order to test the theory, I was about to buy a new card, format it to FAT32 with that being the only partition on it and attempt a back up. However, before I had the chance to do that, I decided to try a provided Recovery in MobileUncle. I thought I had chosen a ROW version but I obviously hadn't and turns out it was a Chinese one... Man, if only I were a bit more patient (read: not so stupid)...
Anyway, of course you already know the scatterfile ect. is different from ROW and now I'm stuck in bootloop. I've studied my options and am going to use Flashtool but have a question before I do any more damage... He..he..he... Should I simply use the official ROM from Lenovo (I have ROW_s115 and can only find official ROW_s119 online; no OTA updates available prior to this mishap in Indonesia) and only tick the Recovery box in Flashtool, or can I simply load the s119recovery.img, tick the Recovery box and go for it? I assume that it would be better to use the full stock ROM instead of simply using the Recovery.img in Flashtool considering it may need to redo the filesystem as well... Not sure really. What do you think would be best? Also, would the recovery in the stock ROM P780_ROW_s119 be the same as the stock ROM s115?
Any expert (or any) advice would be very appreciated... Thanks in advance!
Michael
Click to expand...
Click to collapse
Is absolutely important!!! If you have Asian version rom on your phone (s135, s125, etotalk, etc), you must have the Asian recovery. If you have a world rom on your phone (s119, s110, etc), you must have the world recovery.
Try this recovery... http://d-h.st/5U4 (in this zip file is both version).
Hi, try this blog about lenovo p780, my be you find answers. http://lenovop780en.blogspot.ro/
Sorry for my english.
my experiences with this device
I will share my experience with this device.
I got it with a VIBEROM_V1.0_1347_3_ST_P780.
gives a good impression, most apps work very fine.
but
root wasn´t possible (see needrom thread, now there seems to a way how to root it)
my external bluetooth keyboard don´t work
that is a nogo - so I flashed
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
S123 worldwide rom --> no external keyborad
chinese rom S135 --> no external keyborad
within this rom there is offered an update to viberom VIBEROM_V1.0_1405
I did so: no multilanguage, no external keyboard
then http://www.needrom.com/mobile/lenovo-p780-2/
German ok, but no external keyboard.
--> I sold the device on evbay.
Don´t get me wrong. It a good device, good screen, good touch.
Hi all,
I need your help with the following tablet 9" GT90H with Allview A23 CPU/ chipset and android 4.2. I want to backup the ROM, to perform few modifications and to upload the modified image to the tablet, but I am stuck on the first phase (cannot dump the rom).
I tried several ways to do it (actually that I found) to dump/ backup the stock ROM but I was stuck on all of them. First I tried using the clockwork way, but unfortunately my tablet is not supported (and I could not find supported MOD). Then I tried with romdump, but unfortunately I was stuck because the tablet does not have /proc/mnt file. Finally I found a way using the rkdump method but I had non recognize image error (although I am not sure if I found the correct partition to back up - /dev/block/by-name/recovery ). I have doubts if this is the correct partition, because I did a binary copy using dd to a file, which ended up with size around 32 MB (which I found too small for a recovery image).
So that is why I decided to seek help from more advance users (this is my first tablet, and first android experience) and I believe this forum is the right place for that.
My first request is could someone guide how to make a proper ROM backup, that I would be able to restore later?
In addition I want to ask is it possible, once I backed up the ROM, to modify for example the home page (because on the current ROM the home page for all browsers that I install is http://www.baidu.com)?
Moreover I would like to to install the ROM on external memory card and to run the tablet from there (because the internal memory of this table is too low - 8GB but for the system partition I have only 500 mb, which are all occupied with pre installed software). Is this something that I can achieve (android as far as I know is *unix system, and in theory this should be possible)?
Thank you in advance.
For increase space you can use Terminal Emulator for market and must have root on tablet.
Open terminal , and run the commands :
pm get-install-location (this will show you where apps are installing in this moment)
Auto device install is 0 (the tablet chose auto where to install apps,usuale is chosing to internal memory,your 500mb )
internal memory is 1 (Tablet memory - your 500mb )
External memory is 2 this is where you want to instal apps - (your 8GB )
After run the comand and see the sistem is set to AUTO (0) you will run this :
pm set-install-location 2 - This will force apps to instal in your 8gb
to check if is ok , run again : pm-get-install-location
exit terminal emulator
Good luck ! Hope it help you
Problem with my GT90H
Hey Guys,
I have a Problem with my GT90H. It stops to boot at the screen: Tablet PC - Keep Moving Forward.
If i go in the recovery mode. I can reboot the system, but it stops at the same screen like I explained in my first sentence.
The Factory Reset doesn't work. So I read in some communitys that Tablets can be flashed with a new ROM (Android System) over the USB Port from the Computer.
So can anybody send me the Android 4.2.2 Image for my GT90H ?
It's very important. So thanks.
Thanks for your help.
Greetings from
TheGuardianTX
Hi,
so now I have an Firmware as an Image-File at my computer, but I don't know how I can flash my tablet via ADB.
So can someone help me ?
Thanks a lot.
Greetings
TheGuardianTX
Hi folks, first up, apologies for starting a new thread, but i am completely lost and couldn't find any solution online and wasn't sure which thread to post this in. So here is my situation
So, i upgraded my mediapad x1 to 7D-501u a week ago, and it was working well. While on it, i rooted it and did the following tweaks
1. to install google apps i did the tweak at the following link http://forum.xda-developers.com/showthread.php?t=2757537 (which is 1. Go to the following folder 2. / cust / channel / charm_china_u / xml / 3. You will find the file UNSTALL_APK.XML 4. Rename it to : UNSTALL_APK.XML.OLD)
2. I changed the DPI to 400 by changing build.prop
Then, i wanted to give the phone to my sister and did a full factory reset (without undoing the changes above). Now, none of the keyboards work after the reboot, (Huwaei keyboard is all messed up resolution wise, if i choose any of the other keyboards they FC). I tried reinstalling the rom itself, but it give me an error saying unable to mount update.app
Any ideas on how to proceed? I am stuck right now.
Install https://play.google.com/store/apps/details?id=org.pocketworkstation.pckeyboard&hl=en
this keyboard usually works on all dpi settings.
ashish1607 said:
Install https://play.google.com/store/apps/details?id=org.pocketworkstation.pckeyboard&hl=en
this keyboard usually works on all dpi settings.
Click to expand...
Click to collapse
Hi Ashish, thanks for that, but currently i am unable to type anything on the phone that has been factory reset, so i havent been able to setup my google id, havent been able to download anything in the play store etc. I was just wondering if there was a way to overcome that problem of the update.app not being mounted.
When i try to update, it gives me a message saying update file found, but cannot mount update.app
Hi,
Try to connect your x1 to your PC with Hisuite software installed on your PC. If your x1 can connect with Hisuite, you can then reflash your firmware again (I hope).
boysha8 said:
Hi Ashish, thanks for that, but currently i am unable to type anything on the phone that has been factory reset, so i havent been able to setup my google id, havent been able to download anything in the play store etc. I was just wondering if there was a way to overcome that problem of the update.app not being mounted.
When i try to update, it gives me a message saying update file found, but cannot mount update.app
Click to expand...
Click to collapse
Are you trying to reflash the firmware from within the OS? If yes, you are getting the error because you have rooted.
You will need to put update.app into a folder named 'dload' then put the folder at the root directory of your SD card, switch off the phone and force flash.
You can force flash by holding both the vol up and down, and the power on buttons concurrently, when you see the screen lit up, do not release the buttons yet, only let go of them when flashing starts.
At the end of the flash, you will / may be asked to removed the SD card (if you were not asked, pull the card out when the phone reboots, else it will attempt to flash again).
bthoven said:
Hi,
Try to connect your x1 to your PC with Hisuite software installed on your PC. If your x1 can connect with Hisuite, you can then reflash your firmware again (I hope).
Click to expand...
Click to collapse
Thanks a lot. I managed to install a new keyboard and adjust the resolution and stuff. But i am now not able to upgrade or install a different rom version. Once it enters recovery mode i keep getting this same message below.
ERROR:update_package_exist, /sdcard/dload/update.app not mounted
i tried updating using the sd card, i tried using the hisuite software etc. I undid the unstall_apk xml thing, and changed the resolution back, but still no luck. Any pointers will help
boysha8 said:
Thanks a lot. I managed to install a new keyboard and adjust the resolution and stuff. But i am now not able to upgrade or install a different rom version. Once it enters recovery mode i keep getting this same message below.
ERROR:update_package_exist, /sdcard/dload/update.app not mounted
i tried updating using the sd card, i tried using the hisuite software etc. I undid the unstall_apk xml thing, and changed the resolution back, but still no luck. Any pointers will help
Click to expand...
Click to collapse
Please Format your SD card as NTFS.AT unzip your ROM from Huawei website.(B010 version recommaded).and gointo systemupdate and selcet local
Hello everybody, I'm just new here. I need your wise help with a Lenovo S820e.
First of all, the story: Got a Lenovo S820e from a chinese guy. Received a smartphone with lots of chinese garbage on the rom including pornography and things like that, so I decided to look for some guides to reinstall an official ROM for this Lenovo. Honestly I'm a beginner with these things and took me a while after realizing how to do all the proccess.
After reading some basics and check some youtube videos, I went to NeedROM website and looked for this ROM:
***can I post a link?***
Realized that this is the only ROM version (some updates here) but finally the only one that I've found on the internet.
I followed the steps (took me some days, lol) to update via sdcard posted on that ROM link (here the steps):
Install ROM:
Need a memory card, create folder sdfuse and copy to install on this ROM (QSB tailed).
a) normal phone boot into Android OS, use a USB cable to connect PC, the pop-up screen, select USB mass storage devices, and turn on USB storage device;
b) New sdfuse folder, unzip the downloaded firmware, and copied file QSB to the phone sdfuse directory;
Note: Make sure before upgrading phone there is a certain amount of power
2. T card upgrade process
Long press VOLUP + POWER_KEY enter droidboot, a menu appears and select the fourth SDUPDATE, the bottom of the screen you can see the progress and status upgrade
See "SDCARD UPDATE SUCCESS!!!" Indicates a successful upgrade
After some tries, realized how to enter that droidboot (Volume down + power button... after seeing the lenovo logo release the power button). :good:
To shorten this story I finally got a "Lenovo S820e android 4.1.2" with an official ROM, rooted (to get rid of these chinese apps, no offense intended) and without google apps. Here is the part where I spent another few days to install gapps because didn't accomplish with adb loader, cwm recovery, etc.
So I found this guide (russian site, translated with google help) on how to install google apps without CWM, a something like a manual installing:
****????****
Installed the root explorer and copy-pasted the system files to the internal storage, permissions and rebooted the device.
But after boot I got a look-a-like, useless "Assistive touch-thing-app" ( I don't know exactly what is ) that I cannot find how to uninstall it. Note that this was after (at last) installing gapps (20121011 signed, hard to find the correct version for this Lenovo S820e )
Video: https: //youtu.be/ yhIwf3OHAUU
Can I post a youtube video please? I have uploaded a video with my problem. Help me please. Got denied access because I'm a NEW member here.
I need help, if someone have seen something like this "assistive touch-thing" and know how to uninstall / deactivate it will be great and I will pray for you :fingers-crossed:
I don't know i I'm too newbie.
Sorry if I have grammar errors or bad english. I'm not native.
Thank you in advance.
Best Regards.