First off id like to say thanks in advance to any replies and also apologize if this has been posted previously (i searched and could not find anything that was helpful) I lurked around these forums when i had my x1 and im hoping you guys can be as helpful for me as you are for everyone else. anyway onto the issue
I used the superboot method to root my ATT US Streak. My intentions were to update to 2.1 following the steps in the "eclair working on my u.s. unlocked streak!" thread (wont let me put a link since its my first post)
after using fastboot to root the phone will boot up and function fine but recovery and fastboot no longer work. i tried flashing Koush's custom recovery and other things that require fastboot and the terminal just says "sending..." nothing happens no errors or anything, the cmd prompt just sits there and i need to remove the battery to reboot the device.
i then downloaded the Rom Manager apk from the market and flashed the clockwork recovery from there (it said i did anyway). when i load the recovery from boot (volume keys + power and its the stock recovery) and chose option 2 to flash modaco custom rom or even the stock dell rom it just goes to a black screen and i once again need to remove the battery to reboot.
the phone itself is still functioning fine when it boots up and everything works the way it should other than the home, menu, and back button lights flash in random orders, thats just annoying though. again any help is appreciated
so what should i try next?
EDIT: woke up this morning and now the device will not turn on. i tried starting to fastboot and recovery but still nothing. plug it into my pc and i get the "found new hardware wizard" for a Qualcomm CDMA Technologies MSM.
first real brick? ha that would be my luck
EDIT 2: a kid just ran through my work, grabbed my phone and threw it on the ground. it screwed up the 30 pin connector on the phone and the charger. im going to hurt somebody. phone is booting again though... put sd card back in and still boots fine
SOLVED: Dont know the technical reasons behind it but i had to reinstall the drivers and switch usb ports for every fastboot and recovery procedure
removed SD card and its booting up normally. any thoughts?
I recently installed a gingerbread rom Lidroid. it was working ok till i realized i could not stand some bugs. I decided to try cyanogen that was released today. It looked like it installed fine but the phone is stuck trying to install clockwork recovey. it keeps going on and looping at the same screen. the last message it shows before it reboots off is "Replacing stock recovery with Clockworkmod" it just keeps looping doing the same thing. I have tried to get into download mode without success. I have been able to put my phone in download mode the past couple times i have run into trouble. Now i simply cant be able to do it. Any help?
I dont know how it happened but after trying for the past 5 hours, i have been able to get it to work. I took the battery out inserted it back in. I held the volume down button and the power button together. i immediately plugged the phone into USB cable while still holding Vol down and power button. After 10-15 seconds, it brought up the clockworkrecovery. I Wiped everything and the cache. I then tried to reinstall cyanogen(the one that brought all this in the first place) because it was the only one on my sd card. It installed and booted up and now i have CM 7. I can also successfully get into Download Mode
Am not sure what i did, but if anyone can run into such a problem you might try this.
hello, my name is shahrukh and i need some help. i downloaded animmod (from 4shared) and then i donwloaded busybox. then i pressed blur and then it asked me if i want to reboot it. i pressed yes. this is when the problem starts. It turned off and then it turned on half way and then it turned off. it kept doing that and then i just left it for the night. in the morning it was not doing anything. when i held the power button it turned off and on for like two times and then turned off. i cant even start it up so i have no idea what to do.
i don"t know what to do
please help!!!!
Okay, we need details, describe exactly when "halfway on" is. We need your full model number and rom version (if you know it). Have you tried plugging it in to charge? Does it show anything now that you try to boot it? try holding volume up and powering on to enter recovery menu.
details
ok so when it turns on it says samsung. then after like 10 seconds it turns off. it does that for a few times and then it just goes in a black screen. the model number is YP-G7OC/NAW. when i plug it in to charge it goes on and off two times and then off. if it has low battery it just shows the sign. as for the rom i don't think i have any. i just rooted it using superoneclick. if it goes to recovery mode what do i do?
thanks!
(you got me really fired up when i saw the recovery menu!)
If you can get to recovery menu, try a factory reset, and clear cache. I am not sure if there is a recovery rom for your device, you should check samfirmware.com
tried both of them...no luck. and i couldn't find a recovery rom on samfrimware.com.
Your device has capacitive or mechanical home button?
it has a capacitive home button...the usa version
shahrukhraza said:
it has a capacitive home button...the usa version
Click to expand...
Click to collapse
The phone boots in recovery?
If so, I can investigate a little more what's happening.
I'll try to post a return-to-stock image soon... The problem is that mine is cluttered with crap that the zergRush exploit added (it insisted on installing busybox instead of just rooting...)
(I'm not sure, but I think someone else already posted a stock zImage and system image...)
Here is the post about fixing capacitive buttons. A quick search of forum should have found it.
http://forum.xda-developers.com/showthread.php?t=1421797
Sent from my YP-G70 using Tapatalk
nooooooo!!! you guys have all got it wrong. first of all it doesnt boot in recovery. the only way to get in recovery mode is when it shows the battery sign i hold "up volume"+ power button.and the capaciative button is completely fine. im just stuck in a bootloop (i think) and it has nothing to do with a broken capacitive button! i will try to post a video today to show you guys exactly whats happening.
i kind of had the same problem, one time i thought i had entropy's kernel on and i had CWM well i didn't but i still thought i had so i tried rebooting into recovery using the terminal:
su
reboot recovery
then i turned off and went to this weird recovery menu it had four options, reboot system, apply update from SD card, wipe data partition, and power off and it had a ton of red letters and words saying like, couldn't access data partition or cache partition and couldn't access /data/media, or system, and then i just turned it off because i wouldn't let me choose an option, and then i got stuck in a loop but not during when it says SAMSUNG mine happened during the animation music part that look like fireworks and then SAMSUNG would light up blue then go through it again and 2 more times then go black and i tried flashing the US stock ROM in download mode but still would go through the loop and it doesn't even charge so i got nothing
so did you somehow fix yours? and i never got a recovery menu that showed something about shut down.:confused
Before brick
xxxxxxxxxxxxxxxxx
wait....are you asking me those questions? just to tell you im no developer or something. im just a 12 year old who has his galaxy player stuck in a boot loop. you have to make another thread if you have a problem.
sorry!
Ok. : ) You got it wrong. No problem. His case is different from mine. Just wanted to use her Brick in case. Nothing more. good luck.
I resolve my doubts alone. Nothing that Google does not respond. haha
At least before brick.
ok. let me ask google too xD
anyways..anyone have any idea of how to fix this boot loop?
im trying to do the Linux thing by running the ressurector ans the VM windows the forum is posted under development called hard brick recovery for galaxy 5.0
ok.(i have no idea what you are saying...just saying!)
So I flash another ROM to my tab last night (AOKP) and it was running great but I wanted to go back to Clean Rom. I flashed the new rom and wiped everything and anything as I always do with roms. After flashing Clean rom then wiping, I rebooted to a bootloop. I left it overnight and checked on it, and it was still in a bootloop.
I hooked up and started running Odin today to flash stock and Odin was stuck on recovery.img for 3 hours while I was at work. I came home and hit the power button on my tablet and within a few seconds it loads a screen "Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again" Kies does not work on my PC so I cannot use it. Hitting power+volume up doesn't get me into recovery. I know it can be fixed but, how? I have looked all over for this same issue and cannot find much that will help. Any ideas?
*nevermind* finally found something that worked.
You should post the solution you found. It may help others.
Sent from my amazing 10.1 galaxy tab
I tried updating my ROM (to CM11) and came across so many issues. For some reason, it kept rebooting and then at one point just got stuck at the animation screen. So I decided to just start everything from scratch again.
I tried to get into download mode to install CWM, but the phone kept shutting off as soon as I got in. After MANY tries, I finally got in and got it installed. When it finally worked, I tried to get into recovery mode and the same thing happened. Finally after many tries I was able to get in there too. I then installed my ROM and then when it finally loaded, the phone then shut off and tried rebooting but wouldn't get passed the animation screen again.
I did a lot of research and found that some people had their internal power button either get stuck or become defective. Mine clicks so I don't know if that's the problem, but the symptoms that others have mentioned have all happened to me.
Does this in fact sound like a button issue to anyone? Any help is appreciated.
moraha1287 said:
I tried updating my ROM (to CM11) and came across so many issues. For some reason, it kept rebooting and then at one point just got stuck at the animation screen. So I decided to just start everything from scratch again.
I tried to get into download mode to install CWM, but the phone kept shutting off as soon as I got in. After MANY tries, I finally got in and got it installed. When it finally worked, I tried to get into recovery mode and the same thing happened. Finally after many tries I was able to get in there too. I then installed my ROM and then when it finally loaded, the phone then shut off and tried rebooting but wouldn't get passed the animation screen again.
I did a lot of research and found that some people had their internal power button either get stuck or become defective. Mine clicks so I don't know if that's the problem, but the symptoms that others have mentioned have all happened to me.
Does this in fact sound like a button issue to anyone? Any help is appreciated.
Click to expand...
Click to collapse
Seems like your hardware button could be broken, I would all do in this order:
Download Philz Touch Recovery from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Official Firmware from here: http://www.sammobile.com/firmwares/3/?download=28378
Flash Philz touch through Odin
Reboot to Recovery, selct "Clean to install a new rom"
Wipe cache and dalvik cache
Go to downoad mode and flash the md5.tar file through odin