JUST THOUGHT I WOULD TOSS THIS UP IF ANYONE NEEDS IT, THERE IS A COPY IN BLOATWARE LISTS !!!
First what version of KIKAT are you on ? If you are on 4.4.4 NH7 or NK4 the latest upgrade then you can root with Chainfires CF-autoroot or his SuperSu v 1.94, v2.02 or 2.40 this will trip KNOX warranty. Towel Root will not work yet for NH7 or NK4. If you are still on 4.4.2 NC5 then you can use Towel Root to root your device, this will NOT trip KNOX warranty. If you root with Chainfires CF-autoroot or his SuperSu v 1.94 or v2.40 this will trip KNOX warranty on NC5. If you want odin flash a fresh copy of 4.3 NAB, 4.4.2 NC5, or 4.4.4 NH7 here is micmars link http://forum.xda-developers.com/showthread.php?t=2712205 or rpenrod23 [ odin ] (mirrors )http://forum.xda-developers.com/showthread.php?t=2522638 for NK4 and OC5 you will need to go here http://www.sammobile.com/firmwares/ . Make sure you have USB drivers installed on your PC here is the link http://www.mediafire.com/download/ti6xeoh2lx79zis/Samsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
How to flash a fresh copy of a stock OS
1. download the version of KitKat you want to the desktop of your PC.
2. extract zip file to the desktop of your PC it will turn it into a .tar file
3. you need to install Samsung drivers on your PC you can get them from here http://www.mediafire.com/download/ti6xeoh2lx79zis/Samsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
4. download odin to your desktop here is the link ( version 1.85 ) https://mega.co.nz/#!oA5xzTAL!LXoVWBVDWN_7SULGPIv6nWx1gCI3ZZlOMSWdRGVX6Uo ( version 3.07 ) http://www.mediafire.com/download/2uxt5u83qxhz6xr/Odin_v307.zip
5. completely power down device, reboot into download mode (hold power button, home button, and volume down button at the same time, then push the volume up button)
6. open odin on desktop, connect device to PC via USB cable COM: will light up in upper left corner of odin doesn't matter what color it is just shows a connection.
7. click the PDA button a box will open click on desktop then on KitKat file to open
8. now don't touch anything else and click start
9. it will take several minutes, then say pass, and automatically reboot device with new OS/ROM ( this will take 3 to 4 min. after you see Samsung logo )
10. Important !!! If the device was rooted or you are trying to downgrade from NH7 or NK4 back to NC5 the device may bootloop on the startup. ( you will know this when the Samsung logo is still on the screen after 6 to 7 min. )
11. to fix bootloop pull battery then reinstall, boot into download mode and use odin to flash the OS/ROM again it will take the second time and boot up.
Let's root the phone, there is a couple of ways. First if you are running NC5 4.4.2 you can download Towel Root directly to the device here is the link http://towelroot.org/ The second way if you are running any version of KitKKat is to use odin to flash the cf-autoroot .tar, just download cf-autoroot here is the link http://autoroot.chainfire.eu/ to your PC desktop and follow the same instructions listed above just use the root file in place of the rom .tar file. Remember to choose the right root file for the version of KitKat you running so you don't trip KNOX !!!
Recoveries, the two popular ones are TWRP and Philz CWM. INSTALLING A RECOVERY WILL TRIP KNOX WARRANTY!!! You need a recovery to flash roms so you need to make choice at this point ? Here is the link to Philz CWM latest version 6.48.4.tar http://forum.xda-developers.com/showthread.php?t=2201860 and TWRP here http://teamw.in/project/twrp2/201 download to desktop or downloads.
I run a stock rooted 4.4.2 NC5 with Philz custom recovery version 6.12.9 hltespr https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltespr/ . The device was rooted and warranty tripped the second day I owned it. I was in a Sprint corporate Store a couple of wks ago. Showed the tech my rooted note 3. He said I can't touch that, I said what if I unrooted the phone. He said no problem, now I can warranty the phone. He didn't care that the KNOX flag was tripped at all 0x1. Just can't be rooted when you bring it in for service. Sprint doesn't care about KNOX only Samsung cares about KNOX. What is KNOX, KNOX is a program that creates secure encrypted containerization of DATA so it can be sent to another location. So, when Samsung paid millions to the NSA to design the KNOX security containerization system, which apparently they won't warranty will work after the device is rooted, than maybe they care. Can you say track and spy on me !!!
Ok lets install a recovery !!!
1. you need Odin on the desktop of your PC here is the link ( version 1.85 ) https://mega.co.nz/#!oA5xzTAL!LXoVWBVDWN_7SULGPIv6nWx1gCI3ZZlOMSWdRGVX6Uo ( version 3.07 ) http://www.mediafire.com/download/2uxt5u83qxhz6xr/Odin_v307.zip
2. you need to install Samsung drivers on your PC you can get them from here http://www.mediafire.com/download/ti6xeoh2lx79zis/Samsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
3. completely power down your device, and boot into download mode (press and hold the power button, volume down button, and the home button at the same time) a new screen will popup then push the volume up button to get into download mode.
4. click on the Odin zip file and extract to desktop, right click and run as administrator
5. with your device in download mode connect it to your pc via usb cable, COM: will light up in the upper left hand corner of Odin doesn't matter what color or number just shows a connection has been made.
6. click PDA box in odin, a box will popup click where ever you have recovery file downloaded, once open it will show up in box next to PDA
7. click start wait till you see pass and success , then your custom recovery is installed.
After the recovery is installed, download a copy of SuperSu to your desktop here is the link http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip to version v2.40 and for SuperSU 2.46 go here http://forum.xda-developers.com/showthread.php?t=1538053 . Then copy and paste to sd card via USB cable. Now the next thing you are going to do is completely power down the device and boot into recovery. (press and hold the power button, volume up button, and home button at he same time) a menu will come up, click on Install Zip, then sd card to install zip and root device. Boot device and verify it is rooted, then power down, and boot into recovery. Click on backup, MAKE A BACKUP OF YOUR ROOTED ROM !!! Then make a backup of EFS file by its self it will show up in your backup file on the sd card or ext sd card depending on where you choose to put it. Copy and paste the efs file someplace safe.
With the Google Play Store download some type of root file manager like ES File Manager or Root Explorer (what I use). Then you can remove/freeze/delete some of the bloatware on your stock rooted rom. Check out this thread on Bloatware removal http://forum.xda-developers.com/showthread.php?t=2770729
OK lets flash a rom !!!
First, you CANNOT flash a rom that is based on an older version of rom you are currently running. EX: If you are on KK 4.4.2 NC5 you can flash a rom based on NAB or NC5 but you CANNOT use a rom based on mj4 or older read the OP thread carefully . You can run AOSP roms as long as they are based on 4.4+. If you are running a KK 4.4.4 based rom, you will need to odin flash a stock lollipop 5.1.1 OS. Then root the lollipop 5.1.1 OS, install a lollipop compatible recovery. Now you can flash a lollipop based rom.
1. install the new rom zip you want to flash on your sd card via usb cable from PC or download directly to device
2. power down phone completely and boot into recovery
3. from the menu find and wipe cache, delvik cache, and wipe system to install new rom, NOT FACTORY RESET !!!
4. go back to menu and click on install zip then click on where you have the zip ( i.e. sd card ) and install this will take a minute or two
5. back to main menu and reboot device this will take several minutes on the first boot of a new rom
6. enjoy your new rom !!!
Lets do a restore from a backup recovery file !!!
1. completely power down device and boot into recovery
2. go to main menu and click on wipe system to install new rom ( no need to mess with the caches on a restore )
3. back to the menu click on back up and restore, then click on the backup file location ( i.e. sd card )
4. now click on restore
5. when its completed reboot device this will install your original rooted stock rom you made a backup for
Eventually you will figure out that you can make several backups and they have really weird numbered time stamps to identify them.
If my instructions are hard to follow you can find root and recovery installation videos here http://galaxynote3root.com/ or http://qbking77.com/ both are excellent sites !!!
Malware in linked odin site
That odin site is complete malware. Its not where you should get odin.
juts said:
That odin site is complete malware. Its not where you should get odin.
Click to expand...
Click to collapse
Thanks, that just happened. Looks like the site has been hacked !!!
jimzweb1 said:
Thanks, that just happened. Looks like the site has been hacked !!!
Click to expand...
Click to collapse
I have a Note 3 locked to Sprint which announce "Invalid SIM card" everytime I get the sim in and of course it doesn't have network. So I have a question 4u that after flashing this ROM am I possible to use the SIM (I'm from VN) ?
3597dxta said:
I have a Note 3 locked to Sprint which announce "Invalid SIM card" everytime I get the sim in and of course it doesn't have network. So I have a question 4u that after flashing this ROM am I possible to use the SIM (I'm from VN) ?
Click to expand...
Click to collapse
No, it's my understanding the device has to be unlocked by sprint. There is an access code to do that, I have seen it just can't remember where. I will do a little searching.
Should make a noob tutorial since people are still confused.
asim.sidz said:
Should make a noob tutorial since people are still confused.
Click to expand...
Click to collapse
I guess if people are still confused, there are a lot of youtube videos that have walk-throughs as to how to root, install recovery, and flash a ROM. Maybe some people might be visual learners?
asim.sidz said:
Should make a noob tutorial since people are still confused.
Click to expand...
Click to collapse
If my instructions are hard to follow you can watch these videos http://galaxynote3root.com/ or http://qbking77.com/ both are excellent sites !!!
Great work Jimmy
Pretty lucid , these tutorials are
great stuff !!!
Cool!
jimzweb1 said:
If my instructions are hard to follow you can watch these videos http://galaxynote3root.com/ or http://qbking77.com/ both are excellent sites !!!
Click to expand...
Click to collapse
Thank you very much! I cannot imagine the process to get any easier than the way demonstrated in the ways that you directed me. Really appreciate it! Thanks again! Keep up the good work and support! :highfive:
I am on 4.4.4 NH7, how can i downgrade to 4.4.2 NC5?
i am facing gps fix issues...so wanted to give it a try. any ideas?
swapyworld said:
I am on 4.4.4 NH7, how can i downgrade to 4.4.2 NC5?
i am facing gps fix issues...so wanted to give it a try. any ideas?
Click to expand...
Click to collapse
You can't and you shouldn't . Flashing nc5 might brick your phone that's why we all believe one should always wait for a few weeks before jumping on a new ota as downgrade is not possible
Sent from my NOTE 3 .. size does matter .......
lord dredd said:
You can't and you shouldn't . Flashing nc5 might brick your phone that's why we all believe one should always wait for a few weeks before jumping on a new ota as downgrade is not possible
Sent from my NOTE 3 .. size does matter .......
Click to expand...
Click to collapse
My phone came with 4.4.4, that's the problem.. I was told it is possible by odin one click method by r wilco?
Sent from my SM-N900P using Tapatalk
swapyworld said:
My phone came with 4.4.4, that's the problem.. I was told it is possible by odin one click method by r wilco?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
First, if your device came with 4.4.4 NH7 it should be possible to down grade to 4.4.2 NC5. However, is the phone new and under warranty ? If so odin flashing back to NC5 won't trip the knox e-fuse, that happens when you install a custom recovery. Here we go, first BACK UP ALL YOUR DATA TO AN EXT SD CARD OR PC !!! ( i.e. pics, music, videos etc.) From my post here is the link for odin https://mega.co.nz/#!oA5xzTAL!LXoVWBVDWN_7SULGPIv6nWx1gCI3ZZlOMSWdRGVX6Uo download to PC desktop. Then go to micmars and download a copy of NC5 here is the link http://forum.xda-developers.com/showthread.php?t=2712205. It is a zip file so just right click and extract it to your desktop, that will change to a .tar file in a folder. Next extract the odin zip to your PC desktop, and open the odin file as administrator. Now connect your device to your PC via a USB cable. A box will light up in the upper left hand corner COM: doesn't matter what color it is just shows a connection. Now click on the PDA box a new window will open up click on desktop then click on the NC5.tar file to open. Then the file show up next to the PDA box don't touch anything else just click start. Sit back go get a coffee it is going to take few minutes.
Now here is the fun part, if your phone boots up GREAT !!! If it doesn't, and bootloops no problem this common when going back to NC5 it happened to me. Just pull the battery, then reinsert battery, and boot into your stock recovery ( hold the power button, volume up button, and menu button at he same time) once there navigate to factory reset with the volume button and click on factory reset with power button. Finally the phone should boot into NC5, now go to settings/general/about phone and see what version you have.
If you are still on NH7 no problem, it didn't stick go through the process again. Others have had the same thing happen to them, and it took the second time, in the end it's worth it.
I had all kinds of problems on NH7 and so have many others, I went back to NC5 and have had no problems, I'm going to stay here and wait till android 5.0 (lollipop) comes out. Enjoy !!!
Jimzweb1
You sent me here for the thread "How to root Galaxy Note 3".
Thing is, I know how to use CF Auto Root, but I'm pretty green even at that. Maybe a total of 10 phones for my family.
I took root off a Note 3 (sm-n900p) by upgrading to the new firmware (NK4). It was having issues and he wanted to go back to a stock. Now he needs root again and chainfire doesn't list a file for the NK4.
Chainfire says he needs a image file from the update to add to his list, but I do not have it. He also states that in most cases, root will work on the new firmware. But if does not, that's where things go black, what to expect and how to recover?
And from what I read, I can't go back to an early firmware?
Your help would be greatly appreciated, thanks.
btb601 said:
Jimzweb1
You sent me here for the thread "How to root Galaxy Note 3".
Thing is, I know how to use CF Auto Root, but I'm pretty green even at that. Maybe a total of 10 phones for my family.
I took root off a Note 3 (sm-n900p) by upgrading to the new firmware (NK4). It was having issues and he wanted to go back to a stock. Now he needs root again and chainfire doesn't list a file for the NK4.
Chainfire says he needs a image file from the update to add to his list, but I do not have it. He also states that in most cases, root will work on the new firmware. But if does not, that's where things go black, what to expect and how to recover?
And from what I read, I can't go back to an early firmware?
Your help would be greatly appreciated, thanks.
Click to expand...
Click to collapse
First you have a S5 not a note 3 but other than size they are basically the same. Read the post above yours, the same thing will probably happen to you don't panic !!! I have to go to work will be back tonite if you want to wait so I can help as you do it or you can try it yourself even you loop it (like what happened to me and most people ) don't panic just follow the instructions in post # 14. You need a clean copy of NE5 go here enter SM-G900P in search on right, you will have to register but its free , I don't see a XDA site for stock NE5 so here is the link http://www.sammobile.com/firmwares/ enjoy !!!
jimzweb1 said:
First you have a S5 not a note 3 but other than size they are basically the same. Read the post above yours, the same thing will probably happen to you don't panic !!! I have to go to work will be back tonite if you want to wait so I can help as you do it or you can try it yourself even you loop it (like what happened to me and most people ) don't panic just follow the instructions in post # 14. You need a clean copy of NE5 go here enter SM-G900P in search on right, you will have to register but its free , I don't see a XDA site for stock NE5 so here is the link http://www.sammobile.com/firmwares/ enjoy !!!
Click to expand...
Click to collapse
LOL, I know I'm getting old and senile. Been called all kind of mean names and all, but I do believe I know what phone I'm working on. And thanks for the help, maybe a rain check for now. It's not my phone and he's not here.
Have a happy new year, as for me, I'm old and tired and going to bed.
btb601 said:
LOL, I know I'm getting old and senile. Been called all kind of mean names and all, but I do believe I know what phone I'm working on. And thanks for the help, maybe a rain check for now. It's not my phone and he's not here.
Have a happy new year, as for me, I'm old and tired and going to bed.
Click to expand...
Click to collapse
Sorry about that, I'm no spring chicken either. I'm sure you know what phone you have, I only based my statement on the firmware name (NK4). If you want try in the future I would glad to try and help !!! You will find as I have that here on XDA there is always someone to lend a hand !!!
jimzweb1 said:
Sorry about that, I'm no spring chicken either. I'm sure you know what phone you have, I only based my statement on the firmware name (NK4). If you want try in the future I would glad to try and help !!! You will find as I have that here on XDA there is always someone to lend a hand !!!
Click to expand...
Click to collapse
Yeah, I kind of figured that, plus the the model number is one letter different too. I would only try it if you are sure I won't lock up his phone using CF Auto root. I've been at this since the 27th, even throw money at chainfire, although I doubted that would do anything. I needed to donate anyway to show some support for his work.
My other question, can I put it back to the firmware he was on? It's was 4.4.4 (NH7). Then I could root his phone if I can't do it as you said in post #14.
btb601 said:
Yeah, I kind of figured that, plus the the model number is one letter different too. I would only try it if you are sure I won't lock up his phone using CF Auto root. I've been at this since the 27th, even throw money at chainfire, although I doubted that would do anything. I needed to donate anyway to show some support for his work.
My other question, can I put it back to the firmware he was on? It's was 4.4.4 (NH7). Then I could root his phone if I can't do it as you said in post #14.
Click to expand...
Click to collapse
No guarantee it won't bootloop !!! I did on my note 3, you just have to take a step back and keep going. Let me give you an overview, but then you need to follow the individual steps in my first post for each part you need to do.
Ok, the first thing you are going to do is BACK UP ALL THE DATA ON THE DEVICE !!! I.E. music, pics, and videos. These are found on the internal sd card copy and paste them on the desktop of your PC.
Now download Odin to your desktop and extract it. (get the link in 1st post) Download a fresh copy of NH7 4.4.4 to your desktop (get the link in 1st post) and extract it. Now follow the instructions in the first post to flash a stock rom. Let it boot up, if it bootloops take off the back and pull the battery. Let it sit for two minutes, replace the battery and hold the power button, volume up button, and the menu button at the same time. It should boot into a stock recovery, if it DOES use the volume button to navigate to factory reset and push the power button. Let device reboot this will take a couple of minutes. Now go to settings/general/about device and see what version of KK you are running.
If it DOES NOT boot into a stock recovery, and goes back to your custom recovery or bootloops. No problem, pull the battery let it set for a couple of minutes reinstall battery then hold the power button, volume down button, and menu button at the same time and boot into download mode. Go to the first post and flash the rom again it will stick the second time.
Once you are back to bone stock 4.4.4 NH7 just follow the first post for rooting and recoveries. I know this is your friend's device and you don't want to mess it up. So before you try anything check here http://autoroot.chainfire.eu/ go to SM-G900P NK4 and try the CF-auto root for the s5. The s5 and note 3 are pretty much the same. You can try to flash the root through odin the worst that can happen is it will fail and not install. Then you are back to try and going back to 4.4.4 NH7.
Related
Hi,
I need help guys.
I have S4 and I was trying to mess with it and now I don't have it at all. (pic 1)
the Samsung logo and unlock lock icon are as far as my phone goes now, and after that u cant even power it off u have get battery out. (pic 2)
I am able to go to download mode (pic 3)
and I was able to get to there (up+menu+power key), but now I cant even go there. I get black screen when I am trying to do it. (pic 4)
Thanks for your time,
Ps. Help me
Did you flash a ROM? In you pictures it appears that you can still get to recovery, is that true? What steps did you take for root? We need more information.
answer
Eeiden said:
Did you flash a ROM? In you pictures it appears that you can still get to recovery, is that true? What steps did you take for root? We need more information.
Click to expand...
Click to collapse
I was trying to flash rom, I was trying to make in international phone so it could work in Europe with out any Verizon build in stuff, just pure Samsung.
I can go do download mode, I was able to go for recovery before. That why there is the 4th picture, in stead of regular recovery a had that "teamwin" screen. Now when I press up menu and power is saying its going to recovery boot but then it resets it self and going back to Samsung unlock icon screen and just stays there...
You hold volume down + power to get to download mode. Then connect to a pc and download the all in one tool found in the development thread. Ignore the messages about having your phone in USB debugging and tell it to flash twrp 2.6.0.0. If it doesn't take In download mode, try rebooting your phone while it tries to flash twrp.
If that doesn't work flash stock with Odin and re-root and unlock the phone.
Sent from my SCH-I545 using xda app-developers app
I'm having the exact same problems right now. I tried flashing a 4.3 i9505 rom and now I can't get back into recovery and I can't boot into the OS. I can get into download mode and use ODIN, but I don't know what to do from there. I tried using the All-In-One tool to install TWRP, but it just says Device Not Found. I also tried flashing the stock sch-i545 kernel in ODIN, and it completed successfully, rebooted, and its still doing the same thing. Is there some other way that I've missed to return to stock? I'm kinda bummin here.. but thats what comes with the territory I suppose. Any help you can offer would be greatly appreciated. Thanks.
Found the factory image thread. Going to follow instructions. Will report back.
it works but not completly
So guys going back to my problem I was trying to do everything like lahma69 was trying too...
in odin was error that device not found, all off that...
but what I did, I look more online and I found this one guy...
and what I did in download mode I use odin, and in PDA selection I use this file stockroms(dot)net/file/GalaxyS4/SCH-i545/VRUAMDK_NoWipe.tar.zip
now boom... its kinda works... I am back with my os, I got the android root.
but some things are not right... my phone is very hot, maybe because its charging its self for the first time in weeks.
more important is Whats is happening right now, in boot menu I get errors, no commands, it was not able to do factory reset until I went into os and did it over there... and I cant do software update from Verizon... it goes to root and its trying but then gets error and going back to os...
and I am worry about that file that I download...
so we got little progress and lahma69 I can at least operate os and I have back stock root...
but until we will not going to make it 100% hold on with what I did...
U cant flash a rom thats not made specifically for the verizon variant (i545). The i9505 is the international version of the phone. Hence your phone not booting. Youre going to have to flash the stock mdk firmware through odin and start over (reroot, etc).
SCH-I545 using Tapatalk 2
sannek, I actually got it back up and running doing the same thing you did. I flashed the factory image in this thread: http://forum.xda-developers.com/showthread.php?t=2301259
I haven't noticed any problems yet. I'm fixing to reroot and flash my nandroid. I will let you know if I run into any problems.
I know you can't typically flash a i9505 rom on a verizon gs4, but the author of a i9505 4.3 rom gave me some instructions to try in order to get it working. I'm inserting a 4.3 ramdisk into a 4.2 AOSP ktoonsez verizon gs4 kernel, and replacing the boot.img in the 4.3 i9505 rom. I now know that I had accidentally inserted the wrong version kernel, and thats what caused my problems.
lahma69 said:
sannek, I actually got it back up and running doing the same thing you did. I flashed the factory image in this thread: http://forum.xda-developers.com/showthread.php?t=2301259
I haven't noticed any problems yet. I'm fixing to reroot and flash my nandroid. I will let you know if I run into any problems.
I know you can't typically flash a i9505 rom on a verizon gs4, but the author of a i9505 4.3 rom gave me some instructions to try in order to get it working. I'm inserting a 4.3 ramdisk into a 4.2 AOSP ktoonsez verizon gs4 kernel, and replacing the boot.img in the 4.3 i9505 rom. I now know that I had accidentally inserted the wrong version kernel, and thats what caused my problems.
Click to expand...
Click to collapse
lahma69 were u able to do software upgrade on your phone?
and I am happy for you, mine still have same problems like I mentions up there, I still get error and no command in root and I cant get software update... as soon I will be able to figure this out that will mean that my phone is 100% able to go back to Verizon that's one thing but then I will now for future because really want to make this phone a Europe compatible phone...
SaNNeK said:
lahma69 were u able to do software upgrade on your phone?
and I am happy for you, mine still have same problems like I mentions up there, I still get error and no command in root and I cant get software update... as soon I will be able to figure this out that will mean that my phone is 100% able to go back to Verizon that's one thing but then I will now for future because really want to make this phone a Europe compatible phone...
Click to expand...
Click to collapse
My phone seems to be at 100%. I never do software updates through Verizon so I would not know if thats working or not. After I flashed the stock image in ODIN and rerooted my device, I immediately flashed TWRP through Goomanager and reflashed my nandroid (Eclipse TW rom.) Everything is running well and my phone isn't warm. Why are you trying to do a software update? I think there is an update now that can't be rooted, so you definitely don't want to do that...
I tried several things to get the i9505 4.3 rom running on my device. You can get an idea of what I did by reading this thread: http://forum.xda-developers.com/showthread.php?t=2253528&page=779 Scroll down to post #7785 and that is mine. I never did get it to boot... Let me know if you need anything else.
root problem and upgrate
So I did exactly how xda web site was saying about going back to stock and all of that.
It worked, I can run to os and I have original root.
Still have couple of problems,
1.when u in recovery I see error and no command right below android guy. also I see new info in yellow color, below regular blue recovery screen option. (pic1)
2. information in yellow color is follow: (pic 2)
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the csc-code:VZN
successfully applied multi-CSC.
never see in before, don't know what to do..
3. I cant do regular Verizon software update. S4 resets it self and goes to recovery where is trying to do update but ends um saying error and then is going back to os and its saying that update was not that and that there were no changes applied...(pic 3)
I still need your help guys...
SaNNeK said:
So I did exactly how xda web site was saying about going back to stock and all of that.
It worked, I can run to os and I have original root.
Still have couple of problems,
1.when u in recovery I see error and no command right below android guy. also I see new info in yellow color, below regular blue recovery screen option. (pic1)
2. information in yellow color is follow: (pic 2)
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the csc-code:VZN
successfully applied multi-CSC.
never see in before, don't know what to do..
3. I cant do regular Verizon software update. S4 resets it self and goes to recovery where is trying to do update but ends um saying error and then is going back to os and its saying that update was not that and that there were no changes applied...(pic 3)
I still need your help guys...
Click to expand...
Click to collapse
Did you see what I said about doing Samsung software updates? The rooting threads for the Verizon GS4 say that the new VRUAME7 OTA update can't be rooted. After flashing the stock image from oden, why don't you reroot your device according to http://forum.xda-developers.com/showthread.php?t=2290798 and then install Goomanager, click the menu key, click "Install open recovery script" and that will install TWRP recovery. From there, flash a verizon rom of your choice and all should be well, no? I only use TWRP so I can't give you any input on other recoveries. Make sure you didn't somehow get updated to VRUAME7.
township japinove
lahma69 said:
My phone seems to be at 100%. I never do software updates through Verizon so I would not know if thats working or not. After I flashed the stock image in ODIN and rerooted my device, I immediately flashed TWRP through Goomanager and reflashed my nandroid (Eclipse TW rom.) Everything is running well and my phone isn't warm. Why are you trying to do a software update? I think there is an update now that can't be rooted, so you definitely don't want to do that...
I tried several things to get the i9505 4.3 rom running on my device. You can get an idea of what I did by reading this thread: http://forum.xda-developers.com/showthread.php?t=2253528&page=779 Scroll down to post #7785 and that is mine. I never did get it to boot... Let me know if you need anything else.
Click to expand...
Click to collapse
Well I am not that good with all of it... I don't know a lot of meanings of all this like TWRP, Eclipse TW rom, or what you said u did on post #7785
so I am just trying to be able to make it run like new, and then if I do that I will try to work on my s3 and practice on that...
I am beginner in it... plus my English abilities are not that great, so I really don't know which root is the best or how to do it with out messing up entire phone. I love to dig into it, and my s4 was just laying broken for past month and I worked on in today with you guys and its almost working... I almost made claim from insurance for new phone but this one starts working today..
and looks like everything is fine with it
except root errors and no commands ,I cant wipe cash because its crashing and restarting and I cant do that software update, and I have that manual multi csc note in recovery system like I mention just on top with pictures...
SaNNeK said:
Well I am not that good with all of it... I don't know a lot of meanings of all this like TWRP, Eclipse TW rom, or what you said u did on post #7785
so I am just trying to be able to make it run like new, and then if I do that I will try to work on my s3 and practice on that...
I am beginner in it... plus my English abilities are not that great, so I really don't know which root is the best or how to do it with out messing up entire phone. I love to dig into it, and my s4 was just laying broken for past month and I worked on in today with you guys and its almost working... I almost made claim from insurance for new phone but this one starts working today..
and looks like everything is fine with it
except root errors and no commands ,I cant wipe cash because its crashing and restarting and I cant do that software update, and I have that manual multi csc note in recovery system like I mention just on top with pictures...
Click to expand...
Click to collapse
Whats your build number in Settings -> About Phone ?
lahma69 said:
whats your build number in settings -> about phone ?
Click to expand...
Click to collapse
jdq39.i545vruamdk
Working progress
SaNNeK said:
jdq39.i545vruamdk
Click to expand...
Click to collapse
so when I will learn how to fix my phone to 100%.
Then I will experiment with it and try to learn and install more roots if I will learn how to fix first... so I will not panic like I did this time... I was just completely lost, and I need to take is step by step... don't get me wrong... I love doing that kinda stuff I build my first pc when I was 10 years old... back on old good windows 95
SaNNeK said:
so when I will learn how to fix my phone to 100%.
Then I will experiment with it and try to learn and install more roots if I will learn how to fix first... so I will not panic like I did this time... I was just completely lost, and I need to take is step by step... don't get me wrong... I love doing that kinda stuff I build my first pc when I was 10 years old... back on old good windows 95
Click to expand...
Click to collapse
Do you currently have root? To check, you can run the "SuperUser" app. If you don't have it, download it from the Play store. After installing it, run it, and a box should pop up asking you for superuser permissions. Click "Grant." If a message pops up that says something like "Superuser has been granted superuser permissions," then you have root. If you don't have root, you need to get it. Follow the instructions at http://forum.xda-developers.com/showthread.php?t=2290798 . After performing those instructions, and verifying you have root, you need to download an application called "Goomanager" from the play store. After installing and opening it, click your "Menu" key (bottom left hand corner of your phone.) A menu will pop up. Click "Install open recovery script." Click Yes or Ok to all the pop up messages. After that completes, you will have TWRP recovery installed. Your recovery is what you boot your phone to in order to flash new roms, kernels, etc. In order to boot into recovery, turn off your phone completely, click and hold your volume up button, and power on your phone (while still holding volume up.) You should see some tiny blue text pop up in the top left hand corner of your screen that saying "Opening recovery" (or something to that effect.) Once you see that text, you can let go of volume up, and you will boot into TWRP. Let me know if you get this far...
And by the way, for the love of God, do not do any Samsung system updates.
lahma69 said:
And by the way,for the love of God, do not do any Samsung system updates.
Click to expand...
Click to collapse
And thats the most important part, because if you do you will lose root and your ability to customize your phone. In layman's terms? You will be re-VZ-navigated.
I am having a similar issue. Got the "Samsung Custom" boot screen with no boot to the OS after clean wipe and install of Hyperdrive 7. Since then I have been troubleshooting the issue and have tried many things including the "No-Wipe Factory Image". Once complete I am still getting the Samsung Custom boot screen and no loading of the OS.
Any ideas as to what I can try.
Thanks in advance,
Tony
lahma69 said:
Do you currently have root? To check, you can run the "SuperUser" app. If you don't have it, download it from the Play store. After installing it, run it, and a box should pop up asking you for superuser permissions. Click "Grant." If a message pops up that says something like "Superuser has been granted superuser permissions," then you have root. If you don't have root, you need to get it. Follow the instructions at http://forum.xda-developers.com/showthread.php?t=2290798 . After performing those instructions, and verifying you have root, you need to download an application called "Goomanager" from the play store. After installing and opening it, click your "Menu" key (bottom left hand corner of your phone.) A menu will pop up. Click "Install open recovery script." Click Yes or Ok to all the pop up messages. After that completes, you will have TWRP recovery installed. Your recovery is what you boot your phone to in order to flash new roms, kernels, etc. In order to boot into recovery, turn off your phone completely, click and hold your volume up button, and power on your phone (while still holding volume up.) You should see some tiny blue text pop up in the top left hand corner of your screen that saying "Opening recovery" (or something to that effect.) Once you see that text, you can let go of volume up, and you will boot into TWRP. Let me know if you get this far...
And by the way, for the love of God, do not do any Samsung system updates.
Click to expand...
Click to collapse
as my understanding its not.. I just did that no wipe recovery...
sorry I was out of town today... so I assume I will have to do root but which one is the best? there is so many different ones...
Greetings, fellow Mega-Maniacs!
I am currently working with dev Geohot to get us root access for the SGH-I527 with Baseband Version I527UCUBNE7. All known root methods have been tested and proven to not work with this version of android with this baseband, due to the extremely locked down nature of Samsung Knox on this device.
I, personally, have been throwing every exploit I can think of at this device, to no avail. As of the time and date of this post, we have a donor ready to help the cause (Special thanks to caguas56). That is why I'm proposing a bounty on root access for this phone (SGH-I527 AT&T US version only, although there is a high possibility that it'll work on the Sprint,T-Mo and VZW variant).
The first developer who can successfully get ROOT on KitKat with baseband I527UCUBNE7 and demonstrate this with a successful public test will be awarded the bounty. The bounty will be split equally between devs and donors willing to team up.
I'm in for $10 at the moment, and I'll piss away more if needed down the line.
Who else is in? LETS GET THIS DONE, PEEPS!
Please, only posts regarding root access on this thread. For firmware rollbacks to 4.2.2, see azpatterson3's thread located HERE
kmt5150 said:
Greetings, fellow Mega-Maniacs!
I am currently working with dev Geohot to get us root access for the SGH-I527 with Baseband Version I527UCUBNE7. All known root methods have been tested and proven to not work with this version of android with this baseband, due to the extremely locked down nature of Samsung Knox on this device.
I, personally, have been throwing every exploit I can think of at this device, to no avail. As of the time and date of this post, we have a donor ready to help the cause (Special thanks to caguas56). That is why I'm proposing a bounty on root access for this phone (SGH-I527 AT&T US version only, although there is a high possibility that it'll work on the Sprint,T-Mo and VZW variant).
The first developer who can successfully get ROOT on KitKat with baseband I527UCUBNE7 and demonstrate this with a successful public test will be awarded the bounty. The bounty will be split equally between devs and donors willing to team up.
I'm in for $10 at the moment, and I'll piss away more if needed down the line.
Who else is in? LETS GET THIS DONE, PEEPS!
Please, only posts regarding root access on this thread. For firmware rollbacks to 4.2.2, see azpatterson3's thread located HERE
Click to expand...
Click to collapse
In for at least $20.
Put me down for 2 bucks.
I know you stated you had tried it all but I have a couple questions for you.
#1. Are you able to odin and access the latest PhilZ Recovery on your Mega? I ask because I read other sections like the Note 2's, etc on AT&T and they are able to flash recovery fine and boot into recovery fine.
#2. If you have tried this method, did you try and flash the latest SuperSU v2.00 from Chainfire through PhilZ?
================
Below is a method I suggested to some in my OTA Update thread to NE4 ( KitKat ) for Rooting all my Galaxy phones on KitKat listed and not one has failed to gain root or to disable KNOX. Note this method will trip KNOX and void your warranty. Try this at your own risk....
================
1.Flash the latest Philz recovery ( Galaxy Mega (meliusltexx) ) .
1a) Be sure when flashing a custom recovery not to allow the device to reboot into the OS right after and instead go straight to the recovery first.
( Uncheck reboot device in Odin or if you forgot to uncheck the box after a successful flash of the Custom Recovery in Odin, quickly hold down vol+, Menu & Power Button or last resort pull the battery before it has time to reboot into the OS {again this is after the phone reboots from flashing the custom recovery and passes}).
The security will over write the custom recovery with the stock recovery and you will have to flash Philz or if available TWRP again. First boot into custom recovery will make it stick on after.
2. Once flashed and booted into recovery, you'll be on the main screen.
( Optional but recommended )
2a) At this point, and it is just a suggestion to you all, make a complete backup of the phone as it sits unmodded. I couldn't really tell you how many times I have read/seen of people post that they forgot to back up their phones after they had attempted to do something to their phones and had caused them to have problems..... well many would be surprised how often this happens and I have been guilty of it due to just being impatient. This way you will have a starting point fresh, stock and even unrooted to go back to. After your done proceed to step #3.
3. Tick on Philz settings.
4. Tick on Re-root System (Super SU).
5. You will then see the log scroll at the bottom and tell you to reboot and install SuperSU through the Playstore.
6. Reboot Device and once you have booted up, install SuperSU via Playstore or if you have the APK on hand, install it.
7. Once installed it will ask you that it needs to update binaries, do so. It will also detect KNOX and ask to attempt
to disable it, go ahead and it will attempt to do so. ( I have yet for it to say unsuccessful )
8. Enjoy being rooted afterwards.
=======================================
If after step #6 it fails to update binaries or for some chance the SuperSU APK failed to install properly or failed to provide Root Access, below is a link for the newer SuperSU v2.00 that is flashable in your Custom Recovery. Flash it by rebooting back into Recovery and flashing the ZIP file that's downloadable from the middle of the main page in the link below. Once flashed continue on from step #6 above.
Thank you @Chainfire
SuperSU v2.00 <------- click here
.
.
.
.
.
DarkAngel said:
I know you stated you had tried it all but I have a couple questions for you.
#1. Are you able to odin and access the latest PhilZ Recovery on your Mega? I ask because I read other sections like the Note 2's, etc on AT&T and they are able to flash recovery fine and boot into recovery fine.
#2. If you have tried this method, did you try and flash the latest SuperSU v2.00 from Chainfire through PhilZ?
================
Below is a method I suggested to some in my OTA Update thread to NE4 ( KitKat ) for Rooting all my Galaxy phones on KitKat listed and not one has failed to gain root or to disable KNOX. Note this method will trip KNOX and void your warranty. Try this at your own risk....
================
1.Flash the latest Philz recovery ( Galaxy Mega (meliusltexx) ) .
1a) Be sure when flashing a custom recovery not to allow the device to reboot into the OS right after and instead go straight to the recovery first.
( Uncheck reboot device in Odin or if you forgot to uncheck the box after a successful flash of the Custom Recovery in Odin, quickly hold down vol+, Menu & Power Button or last resort pull the battery before it has time to reboot into the OS {again this is after the phone reboots from flashing the custom recovery and passes}).
The security will over write the custom recovery with the stock recovery and you will have to flash Philz or if available TWRP again. First boot into custom recovery will make it stick on after.
2. Once flashed and booted into recovery, you'll be on the main screen.
( Optional but recommended )
2a) At this point, and it is just a suggestion to you all, make a complete backup of the phone as it sits unmodded. I couldn't really tell you how many times I have read/seen of people post that they forgot to back up their phones after they had attempted to do something to their phones and had caused them to have problems..... well many would be surprised how often this happens and I have been guilty of it due to just being impatient. This way you will have a starting point fresh, stock and even unrooted to go back to. After your done proceed to step #3.
3. Tick on Philz settings.
4. Tick on Re-root System (Super SU).
5. You will then see the log scroll at the bottom and tell you to reboot and install SuperSU through the Playstore.
6. Reboot Device and once you have booted up, install SuperSU via Playstore or if you have the APK on hand, install it.
7. Once installed it will ask you that it needs to update binaries, do so. It will also detect KNOX and ask to attempt
to disable it, go ahead and it will attempt to do so. ( I have yet for it to say unsuccessful )
8. Enjoy being rooted afterwards.
=======================================
If after step #6 it fails to update binaries or for some chance the SuperSU APK failed to install properly or failed to provide Root Access, below is a link for the newer SuperSU v2.00 that is flashable in your Custom Recovery. Flash it by rebooting back into Recovery and flashing the ZIP file that's downloadable from the middle of the main page in the link below. Once flashed continue on from step #6 above.
Thank you @Chainfire
SuperSU v2.00 <------- click here
.
.
.
.
.
Click to expand...
Click to collapse
Bootloader is locked
So no recovery flashing
Sent from my GT-I9205 using XDA Free mobile app
Grarak said:
Bootloader is locked
So no recovery flashing
Sent from my GT-I9205 using XDA Free mobile app
Click to expand...
Click to collapse
Well technically all bootloaders are locked (except for the few that aren't) but I take it AT&T is wanting/trying to join the band wagon with Verizon and locking the bootloaders indefinitely by encrypting them on all the devices they can now.
Sorry then, my method will not work straight forward. Good luck. :good:
DarkAngel said:
I know you stated you had tried it all but I have a couple questions for you.
#1. Are you able to odin and access the latest PhilZ Recovery on your Mega? I ask because I read other sections like the Note 2's, etc on AT&T and they are able to flash recovery fine and boot into recovery fine.
#2. If you have tried this method, did you try and flash the latest SuperSU v2.00 from Chainfire through PhilZ?
================
Below is a method I suggested to some in my OTA Update thread to NE4 ( KitKat ) for Rooting all my Galaxy phones on KitKat listed and not one has failed to gain root or to disable KNOX. Note this method will trip KNOX and void your warranty. Try this at your own risk....
================
1.Flash the latest Philz recovery ( Galaxy Mega (meliusltexx) ) .
1a) Be sure when flashing a custom recovery not to allow the device to reboot into the OS right after and instead go straight to the recovery first.
( Uncheck reboot device in Odin or if you forgot to uncheck the box after a successful flash of the Custom Recovery in Odin, quickly hold down vol+, Menu & Power Button or last resort pull the battery before it has time to reboot into the OS {again this is after the phone reboots from flashing the custom recovery and passes}).
The security will over write the custom recovery with the stock recovery and you will have to flash Philz or if available TWRP again. First boot into custom recovery will make it stick on after.
2. Once flashed and booted into recovery, you'll be on the main screen.
( Optional but recommended )
2a) At this point, and it is just a suggestion to you all, make a complete backup of the phone as it sits unmodded. I couldn't really tell you how many times I have read/seen of people post that they forgot to back up their phones after they had attempted to do something to their phones and had caused them to have problems..... well many would be surprised how often this happens and I have been guilty of it due to just being impatient. This way you will have a starting point fresh, stock and even unrooted to go back to. After your done proceed to step #3.
3. Tick on Philz settings.
4. Tick on Re-root System (Super SU).
5. You will then see the log scroll at the bottom and tell you to reboot and install SuperSU through the Playstore.
6. Reboot Device and once you have booted up, install SuperSU via Playstore or if you have the APK on hand, install it.
7. Once installed it will ask you that it needs to update binaries, do so. It will also detect KNOX and ask to attempt
to disable it, go ahead and it will attempt to do so. ( I have yet for it to say unsuccessful )
8. Enjoy being rooted afterwards.
=======================================
If after step #6 it fails to update binaries or for some chance the SuperSU APK failed to install properly or failed to provide Root Access, below is a link for the newer SuperSU v2.00 that is flashable in your Custom Recovery. Flash it by rebooting back into Recovery and flashing the ZIP file that's downloadable from the middle of the main page in the link below. Once flashed continue on from step #6 above.
Thank you @Chainfire
SuperSU v2.00 <------- click here
.
.
.
.
.
Click to expand...
Click to collapse
Believe me, we have tried it all. I have tried a process similar to this and when the phone got done with all the flashing and went to boot up, I got a prompt that said 'We have detected software not approved for use by AT&T. Please take your phone to an AT&T store for assistance.' It also says Secure Check Failed: Kernel. I had to send my phone to sammy to get it fixed since I tripped a few flags. Should be back by Friday the 10th.
Possible to use this method with 4.4 kernel from mega?
http://forum.xda-developers.com/showthread.php?t=2722073
I don't know much about this but my S4 active also has a locked bootloader, and I was able to achieve root on 4.4.2 using the above method. Thought it might be possible to adapt to your cause.
jstinger9489 said:
http://forum.xda-developers.com/showthread.php?t=2722073
I don't know much about this but my S4 active also has a locked bootloader, and I was able to achieve root on 4.4.2 using the above method. Thought it might be possible to adapt to your cause.
Click to expand...
Click to collapse
Will definitely try this again when my phone gets here tomorrow and post updates...
jstinger9489 said:
http://forum.xda-developers.com/showthread.php?t=2722073
I don't know much about this but my S4 active also has a locked bootloader, and I was able to achieve root on 4.4.2 using the above method. Thought it might be possible to adapt to your cause.
Click to expand...
Click to collapse
Tried and my device still won't act right, can only get into download mode. recovery is gone and when i attempt to power on, I get a msg about Secure fail: Kernel and then a yellow triangle with a ! says 'System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nesrest AT&T store for help."
UPDATE: A buddy of mine has a JTAG service and I'm going to send it to him for repair. UGH! I'm selling this sonofabitch. I should NOT have to go thru this much bull**** just do modify something I paid 500 bucks for without a contract.
kmt5150 said:
Tried and my device still won't act right, can only get into download mode. recovery is gone and when i attempt to power on, I get a msg about Secure fail: Kernel and then a yellow triangle with a ! says 'System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nesrest AT&T store for help."
UPDATE: A buddy of mine has a JTAG service and I'm going to send it to him for repair. UGH! I'm selling this sonofabitch. I should NOT have to go thru this much bull**** just do modify something I paid 500 bucks for without a contract.
Click to expand...
Click to collapse
Have you tried towel root
http://towelroot.com/
BarakOsama said:
Have you tried towel root
http://towelroot.com/
Click to expand...
Click to collapse
Have YOU tried towelroot?
Or have you not read any of the many theads on the subject?
Sorry, not trying to be rude, the same thing has been said so many times
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Can anyone send me boot.img of ATT KK rom?
captemo said:
Have YOU tried towelroot?
Or have you not read any of the many theads on the subject?
Sorry, not trying to be rude, the same thing has been said so many times
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
My bad..
Alright.
To summarize for people who haven't paid attention. Phone was bricked in a last ditch effort to flash back to 4.3 because the 4.4 update made my phone run like s#it. I also have an S4 Active and the service sucks harder than it already did. The 4.4 update makes the S4 drop out constantly and the battery life blows. Samsung told me to run kies in download mode to get it back to 4.3 I did and BOOM, now phone is fu©k!ng bricked and they won't fix it, claiming it's 'rooted' because the kernel says it's version 3 when it's supposed to be at 4 for kitkat. Fu©k!ng duh, you jerks made me flash it back. I am personally never buying another samsung product again because their customer service was horsesh!t. I happen to have a sammy tv, blu ray, home theater and 2 of their former 'top end' phones, but now I'm ditching them. They can lick my scrotum for all I care anymore.
end rant, back to music.
SCH-R960
I have the US Cellular Galaxy Mega SCH-R960 also updated to 4.4.2 out of the box. I am in for some bucks if you can apply this to my version also the baseband number is R960TYUBNF1, I will send you whatever info you need from the phone. Lets get this done! Thank you!
MeatHammer311 said:
I have the US Cellular Galaxy Mega SCH-R960 also updated to 4.4.2 out of the box. I am in for some bucks if you can apply this to my version also the baseband number is R960TYUBNF1, I will send you whatever info you need from the phone. Lets get this done! Thank you!
Click to expand...
Click to collapse
Can you make a complete firmware dump and compile a .PIT file?
No root.
I do not have root so I can not do those things. If there is a way without root please point me in that direction. Thanks
MeatHammer311 said:
I do not have root so I can not do those things. If there is a way without root please point me in that direction. Thanks
Click to expand...
Click to collapse
sure you can
use heimdall
and can anyone send me the boot.img now?
I don't even think you guys want root if you're not even trying to help
Grarak said:
sure you can
use heimdall
and can anyone send me the boot.img now?
I don't even think you guys want root if you're not even trying to help
Click to expand...
Click to collapse
tell me how to get it any you will have it 1 before 5pm today est.
also here is the pit file you asked for. I used it to unbvrick my phone a few times with odin.
ita for the at&t version
hi everyone
this is my first post in these web
a new massage yesterday showed from chinfire
A whole bunch of devices' CF-Auto-Roots have been updated from older firmware bases to 4.4.x firmware bases. Means these CFAR's work again on the latest bootloaders, primarily.
A large number of devices have been added as well. Together these total well over one hundred updates.
I've also made some small changes to the page, like adding base firmware version information and MD5s.
i find a new root phones and my verizone note 2 .I605VRUFND7 4.4.2
i hope that help us
you can download the root from the web site autorootcom
download it to your phone by odin
best regards
Root file Zip in attachment
Instructions
Extract (unzip) the root file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the root file to AP / PDA
Click the start button, sit back and wait
Mohammed Aledreesi said:
Root file Zip in attachment
Instructions
Extract (unzip) the root file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the root file to AP / PDA
Click the start button, sit back and wait
Click to expand...
Click to collapse
Will this unlock the bootloader?
Mohammed Aledreesi said:
Root file Zip in attachment
Instructions
Extract (unzip) the root file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the root file to AP / PDA
Click the start button, sit back and wait
Click to expand...
Click to collapse
@Mohammed Aledreesi
Can you confirm that you have successfully used this root method on a stock Verizon SCH-I605 running 4.4.2 ND7?
I looked at Chainfire's website HERE, and there are a couple of warnings that I thought should be noted....
"UNLOCK BOOTLOADERS
If you have locked bootloaders, flashing one of these will probably brick your device - with the exception of Nexus devices, which will usually automatically "OEM unlock" and wipe your data !"
"KNOX WARRANTY
If you have a KNOX-enabled device, using CF-Auto-Root will trip the KNOX WARRANTY VOID status !"
I figured since im looking for a Note 4 soon I had nothing to lose and gave it a try and it failed to even try and work. I ended up going back and redoing my phone and cleaning things up and using ghettoroot. So I couldn't do anything, maybe others have had success I wouldn't waste my time at this point with this.
Matttrix said:
I figured since im looking for a Note 4 soon I had nothing to lose and gave it a try and it failed to even try and work. I ended up going back and redoing my phone and cleaning things up and using ghettoroot. So I couldn't do anything, maybe others have had success I wouldn't waste my time at this point with this.
Click to expand...
Click to collapse
That's cool that you tried this and thanks for letting others know how it turned out. Too bad it didn't work, but good it didn't brick your phone. Do you know if it tripped your Knox status? It will be interesting to see if the OP provides any further clarification on his experience with this.
mattnmag said:
That's cool that you tried this and thanks for letting others know how it turned out. Too bad it didn't work, but good it didn't brick your phone. Do you know if it tripped your Knox status? It will be interesting to see if the OP provides any further clarification on his experience with this.
Click to expand...
Click to collapse
My knox status was already tripped and my phone is already out of warranty anyways from testing some other stuff a couple weeks ago. So it didn't really matter to me. I was able to boot back into the phone as if nothing happened after it failed from Odin on the CF Root, I just wanted to redo things as the newer updates for Ghettoroot seem to be a bit more stable in setup. As I still had the original and still had some force close issues but now things are smooth and everything is working 10000%.
Unfortunately, it doesn't work!
So Ghettoroot is working on 4.4.2 with ND7 baseband? I've visited that thread several times and it seems some have root with 4.4.2 update and some don't. Leaves it unclear to my mind.
AA far as I can tell, neither Chainfire or Adam Outler have working roots for this new update.
Sent from my Galaxy Note 2 using Tapatalk
jtsmall said:
So Ghettoroot is working on 4.4.2 with ND7 baseband? I've visited that thread several times and it seems some have root with 4.4.2 update and some don't. Leaves it unclear to my mind.
AA far as I can tell, neither Chainfire or Adam Outler have working roots for this new update.
Sent from my Galaxy Note 2 using Tapatalk
Click to expand...
Click to collapse
Just wanted to confirm that ghettoroot for indeed work
Thanks. I surely be elated with root once again. Last smartphone rooted was Droid OG. Too long!
Sent from my Galaxy Note 2 using Tapatalk
Update 11/9/14. I used the 15 Seconds ADB Installer rather than the full SDK. ADB devices cmd revealed the Note 2 finally, but unauthorized. Following a simple uncheck of USB debug followed by a recheck then authorization was immediate. I then used GhettoRoot, a one click version of TowelRoot.
Root with no hiccups a day later. Root enabled apps like Root Explorer and Titanium Backup working as is BusyBox. Android 4.4.2 baseband ND7 (Verizon).
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Hello guys, any ideas? Thanks!
jakeortega said:
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Click to expand...
Click to collapse
Hello guys, any ideas? Thanks!
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
es0tericcha0s said:
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
Click to expand...
Click to collapse
Thank you es0tericcha0s for this information.
What I'm trying to do right now is updating my SHV-e160s from 4.0.4 to 4.1.2 using Kies v2.6. Unfortunately, I'm getting this error "Failed to run firmware upgrade: unknown error.". Until now, I'm afraid to update my firmware manually as I don't have much knowledge to do that.
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Alright, I'll try these steps immediately and will comeback for the result. Thanks again.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Hello, sorry I forgot to ask, will this root my device? I'm afraid I might bricked it.
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
es0tericcha0s said:
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
Click to expand...
Click to collapse
Hello again es0tericcha0s, I haven't tried the instructions that you gave me yesterday as I'm still downloading the firmware, last night I encountered an issue after enabling my Bluetooth, something like "NFC Service has stopped." just keeps on popping up. So I turned off the bluetooth then restarted my phone, it went well for a while.
After that, I enabled my 3G Cellular Data to check what was NFC service error is, after a few minutes, I lost my signal, phone turned to No Service, then in Settings -> About Phone, I got an Unknown Baseband.
EDIT
I got No Service since last night up until now.
EDIT Oct. 13, 2015 9:49 AM +08:00 Manila Time
I manage to update my phone from ICS 4.0.4 to JB 4.1.2. But still, my baseband is Unknown and I have no signal.
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
es0tericcha0s said:
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
Click to expand...
Click to collapse
I also though of that, hopefully not.
When I first got the phone, my gf sent me our pictures via bluetooth , no issues occured. After a while, I noticed that there are so many photos of the previous owner (around 1000+) and mp3s (around 1000+ also). So I connected the phone via usb to my pc and deleted all those pictures and mp3s inside the My Computer -> SHV-E160S -> Phone (Computer\SHV-E160S\Phone). After doing so, I started to encouter some issues, when enabling the bluetooth, the phone hangs and reboots then the error 'NFC service has stopped' keeps on popping up, until it went Unknown Baseband.
Now, the phone keeps on rebooting similar to the symptoms that it gets when baseband version is unknown.
I'm looking for solutions to fix the unknown baseband and saw the Back up and Restore EFS, I just need to root the device to try this fix. Maybe I'll post an update whether if I manage to solve this problem or not, if it didn't fix the issue then maybe the problem is the baseband chip. what a crap!
This is my reference for the EFS Fix
http://techbeasts.com/2014/07/13/fix-samsung-galaxy-unknown-baseband-version-guide/
Thanks!
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
es0tericcha0s said:
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
Click to expand...
Click to collapse
So I need to install TWRP first before rooting the device? Also I'm planning to use a rooted stock firmware which is 4.1.2, I just don't know the difference between UH24 and MH2, I've read that UH24 is already old and it's better to use a MH2 build and what is the Recovery UH24/MH2?
EDIT:
I forgot, I cannot check my current Baseband since it is still unknown.
EDIT: 12:30PM +8:00
I managed to get my Build#, it is MH2, I'm currently looking for a rooted 4.1.2 MH2 download link.
Way faster and easier to use the method I outlined, but either way should work.
es0tericcha0s said:
Way faster and easier to use the method I outlined, but either way should work.
Click to expand...
Click to collapse
Sorry, I'm really a root virgin here. While following your advise, I'm also currently looking at this guide -> http://forum.xda-developers.com/showthread.php?t=1924535. I'm done downloading Tegrak for MH2, a small problem I encountered here is I don't have a folder named 'sdcard' in my phone, so I created one and copied the 'Kernel' .zip, also I copied it to usbStorage folder.
I'm about to flash the 'Recovery' .tar to my phone. Hoping a success result
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
es0tericcha0s said:
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
Click to expand...
Click to collapse
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
jakeortega said:
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
Click to expand...
Click to collapse
Finally! I'm done rooting my phone, though I encountered another issues again. My Menu Button and Back Button does not work.
UPDATE: 4:08PM +8:00GMT
I think I found the problem as to why my Menu button and Back button doesn't work. I'v check my Baseband and it is -> E160SKSJMH1 and my Build # is -> JZO54K.E160SKSJMH2. Am I using a wrong FW as supposed to what I should be using? Which build should I install, the MH1 or the MH2?
Also, the Tegrak Kernel I've used is Build 48 for SHV-E160S MH2. I've also tried factory resetting the phone but the issue still exists.
Thanks!
UPDATE: 4:41PM +8:00GMT
Managed to fixed the issue by updating my Touch Firmware. Cool!
trying to find a flashable nc5 file or higher while currently running on the old rooted mj4 with twrp. Trying to preserve my data that way I don't do to do a full reset. If anyone has a file that'll flash via zip from the twrp recovery, i'd greatly appreciate it. That and I don't really know what the proper steps are to do a proper update. Lots of info here, though it's usually starting off with something else and I'm confused.
Nothing, really? :-/
rcflyer40t said:
Nothing, really? :-/
Click to expand...
Click to collapse
I think I found something here http://www.rwilco12.com/downloads.p...msung Galaxy Note 3 (SM-N900P)/Stock ROMs/NC5 there is a nodata restore verison 2.11gb that I think is flashable through a recovery I need to download it first and I'm trying to contact Rwilco12 to ask him if it is falshable .
Woohoo! Hoping it is. Thank you Jim! I've been trying to find something newer as well in case it's btr.
Have you seen this going to NH7? Usable?
http://forum.xda-developers.com/showthread.php?t=2712205
And this
http://forum.xda-developers.com/note-3-sprint/help/question-upgrading-to-nc5-t2911173
rcflyer40t said:
Woohoo! Hoping it is. Thank you Jim! I've been trying to find something newer as well in case it's btr.
Have you seen this going to NH7? Usable?
http://forum.xda-developers.com/showthread.php?t=2712205
And this
http://forum.xda-developers.com/note-3-sprint/help/question-upgrading-to-nc5-t2911173
Click to expand...
Click to collapse
Basically they would both work but you lose all your data. Anytime you Odin flash a stock OS (rom) it takes you back to bone stock and removes all your data ( i.e. pics, music, apps, and texts ect. . . ) like when you just bought the phone.
So what we are trying to do is find a flashable stock version or as close to stock as possible that can be flashed through your custom recovery where you can choose what to wipe and what to save. In this case your NOT going to wipe data, just wipe cache, dalvik-cache, and system do a dirty flash and try to save your personal data.
Let me see if I can find a copy of NH7.
OK checked out NC5 from Rwilco12 took an hour to download and it was not a useable version, will keep looking.
I am not able to find anything, your best bet at this point is to make a choice to stay where you are rooted mj4 or upgrade by going back to stock.
If you upgrade, to save your data connect the device to your PC. Copy and paste the DCIM, download, music, and video files to the desktop of your PC. Write down your apps on some paper, you will find you need a different version of your apps to run on the upgraded OS anyway so you will have to get them from the play store. Then go to my rom flashing basics and follow the instructions and get the link to Sammobile. This way you can download the version of the OS to your desktop you want Sammobile has them all. Make sure when you Odin flash the OS, you need to give it time to boot up !
It takes 3-5 min to boot the first time and ( sometimes it doesn't boot up DON'T PANIC ) this is normal. If it is caught in a boot loop just pull the battery, reinstall battery boot into download mode and Odin flash the OS again. It will boot the second time. Even if it boots the first time stop, boot into download mode and Odin flash the OS again.
You should always Odin flash a stock OS (rom) TWICE so you get a good clean install. Then install the right version of TWRP for the stock OS you have installed, then root and install your personal data back in the device ( connect device to PC and copy and paste data back in internal storage ).
jimzweb1 said:
I am not able to find anything, your best bet at this point is to make a choice to stay where you are rooted mj4 or upgrade by going back to stock.
If you upgrade, to save your data connect the device to your PC. Copy and paste the DCIM, download, music, and video files to the desktop of your PC. Write down your apps on some paper, you will find you need a different version of your apps to run on the upgraded OS anyway so you will have to get them from the play store. Then go to my rom flashing basics and follow the instructions and get the link to Sammobile. This way you can download the version of the OS to your desktop you want Sammobile has them all. Make sure when you Odin flash the OS, you need to give it time to boot up !
It takes 3-5 min to boot the first time and ( sometimes it doesn't boot up DON'T PANIC ) this is normal. If it is caught in a boot loop just pull the battery, reinstall battery boot into download mode and Odin flash the OS again. It will boot the second time. Even if it boots the first time stop, boot into download mode and Odin flash the OS again.
You should always Odin flash a stock OS (rom) TWICE so you get a good clean install. Then install the right version of TWRP for the stock OS you have installed, then root and install your personal data back in the device ( connect device to PC and copy and paste data back in internal storage ).
Click to expand...
Click to collapse
Looking at your thread of "basics", it says twrp won't work. is that still current, or does it work now?
My understanding is if I want to go to the lastest OS (NC5 or NH7), download it, flash it, then flash it again and pretty much be done? Curious do I still get the hotspot mod back? (as I currently have it with rooted mj4)
gotta go back and find either of those two versions as rooted...
Can you check on your phone if you can download and install Hexo+ from the googleplay store? That's where I'm getting at. If it works under your 4.4.2 nc5 then maybe I don't need to go any higher unless I experience issues, then I'll upgrade again.
Thanks.
rcflyer40t said:
Looking at your thread of "basics", it says twrp won't work. is that still current, or does it work now?
My understanding is if I want to go to the lastest OS (NC5 or NH7), download it, flash it, then flash it again and pretty much be done? Curious do I still get the hotspot mod back? (as I currently have it with rooted mj4)
gotta go back and find either of those two versions as rooted...
Can you check on your phone if you can download and install Hexo+ from the googleplay store? That's where I'm getting at. If it works under your 4.4.2 nc5 then maybe I don't need to go any higher unless I experience issues, then I'll upgrade again.
Thanks.
Click to expand...
Click to collapse
Ok TWRP or Philz CWM will work for both NC5 or NH7 just make sure you have the right version i.e. (the version for mj4 you have now, will not work for NH7). What mod are you using to run the Hotspot? I'm sure you can get the hotspot working with the same mod on both NC5 and NH7 just a newer version once you get the new OS rooted.
I'm running 4.4.4 NK4 I downloaded Hexo+ and it opened no problem.
jimzweb1 said:
Ok TWRP or Philz CWM will work for both NC5 or NH7 just make sure you have the right version i.e. (the version for mj4 you have now, will not work for NH7). What mod are you using to run the Hotspot? I'm sure you can get the hotspot working with the same mod on both NC5 and NH7 just a newer version once you get the new OS rooted.
I'm running 4.4.4 NK4 I downloaded Hexo+ and it opened no problem.
Click to expand...
Click to collapse
awesome good to know.
.... geez, sadly I can't remember how or what I used for the mod. brain cells way too invested in other things that I can't remember. hahahaha damn it. oh fml...
In regards to the right version, I need the .zip file, not the img or img.tar, correct?
You said your os was running smooth and no issues, same with battery consumption (nk4)?
got the NK4 file downloaded, but I'm confused as I didn't find the rooted version on your page. I read "rooting the phone" section under towelroot, am I correct in that the towelroot apk will root the stock NK4 file I've just downloaded from http://forum.xda-developers.com/showthread.php?t=2522638?
This was how I did the hotspot mod... Will this get wiped out? I'm assuming yes.
http://forum.xda-developers.com/showthread.php?t=2505850