This seems to be a weird issue that I'm having, and I hope I'm not missing a step...
Anytime I install a custom rom past 4.1.2; I get no phone audio. I can load up web pages fine, SMS/MMS works to my knowledge, but there is no phone audio. I'll call my house phone, and it will ring the house phone, but I cannot hear myself through the other line. I've tried flashing radios/modems, different combination of ROMs and kernels, and the only way I'm able to keep an active phone, that is able to make phone calls, is to stick with a stock ROM.
My first thought is maybe it thinks it's an unlocked phone? And that's causing it to act up, but I've never had an issue like this before. Any help would be appreciated.
tricky_tee said:
This seems to be a weird issue that I'm having, and I hope I'm not missing a step...
Anytime I install a custom rom past 4.1.2; I get no phone audio. I can load up web pages fine, SMS/MMS works to my knowledge, but there is no phone audio. I'll call my house phone, and it will ring the house phone, but I cannot hear myself through the other line. I've tried flashing radios/modems, different combination of ROMs and kernels, and the only way I'm able to keep an active phone, that is able to make phone calls, is to stick with a stock ROM.
My first thought is maybe it thinks it's an unlocked phone? And that's causing it to act up, but I've never had an issue like this before. Any help would be appreciated.
Click to expand...
Click to collapse
I don't believe the kernal is problem
What is your specific device model?
What have you tried to flash exactly?
Who is your carrier?
Are you flashing clean with all wipes?
Are you letting rom settle?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
tricky_tee said:
This seems to be a weird issue that I'm having, and I hope I'm not missing a step...
Anytime I install a custom rom past 4.1.2; I get no phone audio. I can load up web pages fine, SMS/MMS works to my knowledge, but there is no phone audio. I'll call my house phone, and it will ring the house phone, but I cannot hear myself through the other line. I've tried flashing radios/modems, different combination of ROMs and kernels, and the only way I'm able to keep an active phone, that is able to make phone calls, is to stick with a stock ROM.
My first thought is maybe it thinks it's an unlocked phone? And that's causing it to act up, but I've never had an issue like this before. Any help would be appreciated.
Click to expand...
Click to collapse
After u answer captemos questions… let me ask u this. You say stock 4.1.2, do u mean you have actually odin'd the stock release from sammy?
Gil81 said:
After u answer captemos questions… let me ask u this. You say stock 4.1.2, do u mean you have actually odin'd the stock release from sammy?
Click to expand...
Click to collapse
Apologize for the delay - been busy at work. I guess I could've been clearer.
I am using the SGH-i717 on AT&T. By stock, I meant a Touchwiz-based rom (i.e., Padawan JB). I have no problems with making or receiving phone calls. Whenever I flash a ASOP-based rom, (i.e., LiquidSmooth, BeanStalk, etc.) I have intermittent phone issues. The phone issues I'm having is not having audio when making or receiving phone calls. I know that it is actually placing the call, but I cannot hear the person on the other end, nor can they hear me. Now if I go into network operators, and select an operator that I know isn't going to work (i.e, Verizon, or T-Mobile), and then use "Choose Automatically", sometimes that works for a little bit. However, that has been working less and less now.
My process of flashing includes flashing the rom of choice after a full wipe and reset (right now, it's LiquidSmooth 4.4), wiping the cache and dalvik a couple of times, installing Polluti0n's rom patch, wiping cache and dalvik a couple of times, then installing PA Stock 4.4 Gapp, and finishing the whole process by wiping cache and dalvik a few times more. This is all done through gimmeitorilltell's TWRP Recovery 2.8.0.0
As stated before; I have no issues with Touchwiz-Based roms. I can make and receive phone calls with no problems. Also, before I rooted the phone, i updated it through Kies; so I assume that would update it to the latest radio available. That would be my first suspect, but I'm having difficulty finding a flashable radio for the device.
There also might be a step I'm missing, since all my experience previously with rooting and flashing came on CDMA devices, so there was no issues with radios.
tricky_tee said:
Apologize for the delay - been busy at work. I guess I could've been clearer.
I am using the SGH-i717 on AT&T. By stock, I meant a Touchwiz-based rom (i.e., Padawan JB). I have no problems with making or receiving phone calls. Whenever I flash a ASOP-based rom, (i.e., LiquidSmooth, BeanStalk, etc.) I have intermittent phone issues. The phone issues I'm having is not having audio when making or receiving phone calls. I know that it is actually placing the call, but I cannot hear the person on the other end, nor can they hear me. Now if I go into network operators, and select an operator that I know isn't going to work (i.e, Verizon, or T-Mobile), and then use "Choose Automatically", sometimes that works for a little bit. However, that has been working less and less now.
My process of flashing includes flashing the rom of choice after a full wipe and reset (right now, it's LiquidSmooth 4.4), wiping the cache and dalvik a couple of times, installing Polluti0n's rom patch, wiping cache and dalvik a couple of times, then installing PA Stock 4.4 Gapp, and finishing the whole process by wiping cache and dalvik a few times more. This is all done through gimmeitorilltell's TWRP Recovery 2.8.0.0
As stated before; I have no issues with Touchwiz-Based roms. I can make and receive phone calls with no problems. Also, before I rooted the phone, i updated it through Kies; so I assume that would update it to the latest radio available. That would be my first suspect, but I'm having difficulty finding a flashable radio for the device.
There also might be a step I'm missing, since all my experience previously with rooting and flashing came on CDMA devices, so there was no issues with radios.
Click to expand...
Click to collapse
first off i would flash the rom like so.
1. Factory Data reset
2. Wipe Cache/Dalvik
3. Format System/Data
4. Install rom from Sdcard
5. Wipe Cache/Dalvik
6.Reboot device
7.boot back into recovery
8.Wipe Cache/Dalvik
9. Flash gapps
10.Wipe Cache/Dalvik
Check to see if all is well once the rom is flashed and only the rom. Seems like over kill but can help narrowing down the issue, but i do agree with you as kies being the culprit I never did use it let alone trust it to update the device. Odin would be a better choice and no need to update the device for the latest radio as we have flashable zips. Blazes ics modem is what I'm currently using and has been great, one last thing I'd recommend is to go here http://www.sammobile.com/firmwares/ and grab the JB update and flash it via odin if all else fails.
I experiencing a similar symptom. Intermittently, not one can her me no I can hear anyone. I'm currently on Slimkat 4.4.4 and I have to reboot in order to make the call. Never had this problem when on stock JB 4.1.2.
Can some one point me to how to downgrade to Stock 4.1.2. Thinking about going back, I need a reliable phone.
Upgrade Radio
You must get the best radio for your location:
http://forum.xda-developers.com/showthread.php?t=1693545
tricky_tee said:
Apologize for the delay - been busy at work. I guess I could've been clearer.
I am using the SGH-i717 on AT&T. By stock, I meant a Touchwiz-based rom (i.e., Padawan JB). I have no problems with making or receiving phone calls. Whenever I flash a ASOP-based rom, (i.e., LiquidSmooth, BeanStalk, etc.) I have intermittent phone issues. The phone issues I'm having is not having audio when making or receiving phone calls. I know that it is actually placing the call, but I cannot hear the person on the other end, nor can they hear me. Now if I go into network operators, and select an operator that I know isn't going to work (i.e, Verizon, or T-Mobile), and then use "Choose Automatically", sometimes that works for a little bit. However, that has been working less and less now.
My process of flashing includes flashing the rom of choice after a full wipe and reset (right now, it's LiquidSmooth 4.4), wiping the cache and dalvik a couple of times, installing Polluti0n's rom patch, wiping cache and dalvik a couple of times, then installing PA Stock 4.4 Gapp, and finishing the whole process by wiping cache and dalvik a few times more. This is all done through gimmeitorilltell's TWRP Recovery 2.8.0.0
As stated before; I have no issues with Touchwiz-Based roms. I can make and receive phone calls with no problems. Also, before I rooted the phone, i updated it through Kies; so I assume that would update it to the latest radio available. That would be my first suspect, but I'm having difficulty finding a flashable radio for the device.
There also might be a step I'm missing, since all my experience previously with rooting and flashing came on CDMA devices, so there was no issues with radios.
Click to expand...
Click to collapse
follow dzee advice for flashing...rock solid method..but i still would like to know if you were ever on stock unrooted jb 4.1.2
what version of android were you on when you rooted the device the first time.
---------- Post added at 06:19 PM ---------- Previous post was at 06:11 PM ----------
dodgy1 said:
I experiencing a similar symptom. Intermittently, not one can her me no I can hear anyone. I'm currently on Slimkat 4.4.4 and I have to reboot in order to make the call. Never had this problem when on stock JB 4.1.2.
Can some one point me to how to downgrade to Stock 4.1.2. Thinking about going back, I need a reliable phone.
Click to expand...
Click to collapse
follow the li.k above ur original post. dzee gives a li.k to sammobile. download the correct tar file and fladh via odin
Related
im helping my wife. and i got the problem described below.
When making or receiving phone calls from my
s3 some strange noise starts happening and
won’t stop, resulting in me or the person I am
talking to having to hang up an make the call
again. I have tried new modem. resetting back to stock. flashed new build. reinstalling the
operating system from the built in function and am still experiencing the problem.
If you've already factory reset and flashed a fresh stock 4.1.2 rom for your country then it can only be a hardware fault.
Maybe worth trying a mega wipe script first?
boomboomer said:
If you've already factory reset and flashed a fresh stock 4.1.2 rom for your country then it can only be a hardware fault.
Maybe worth trying a mega wipe script first?
Click to expand...
Click to collapse
already done that. viber and skype works perfect. and also the built in internet call service.
so i think it must be something else like operator(3 sweden) or something as i didnt have this issue a year ago. it started with the lastest update.
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Noypi14 said:
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Click to expand...
Click to collapse
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
es0tericcha0s said:
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
Click to expand...
Click to collapse
Thanks for your reply.
The current cyanogenmod is fine although i prefer the virgin rom. but i can go back to virgin once the problems have been rectified.
I agree that the signal issue has something to do with the modem so i tried different modems using odin but the XXUBMEA wouldnt change despite trying several modems and several times.
The phone is on three network (uk) with its current baseband 19505XXUBMEA.
The official rom i tried was on 4.3 and kies said it was the latest
Thanks again
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
es0tericcha0s said:
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
Click to expand...
Click to collapse
Thanks again for replying.
What i havent actually tried (which i'm reading at the moment) is the formatting of data under the advanced options on twrp. I dunno if it will make a difference say i try a new rom. I don't mind trying and starting from scratch. Like format data then install a new rom. Do u think this will make a difference? (will this be similar to formatting a dard drive on a pc before installing windows?)
What i suspect is there is nothing wrong with the roms i've tried but something in the installation got messed up and remains there even after wiping the data.
I think i have tried doing it twice only to find out that it didnt change the modem despite odin saying pass.
Should i format data then install a fresh rom?
Hard
but challeng refused
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
es0tericcha0s said:
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
Click to expand...
Click to collapse
Noypi14 said:
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
Click to expand...
Click to collapse
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
es0tericcha0s said:
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
Click to expand...
Click to collapse
thanks again for your interest.
the issue about the modem is somehow clear. thanks for clearing that up.
i think it is better to tackle the problems i have in my current setup rather than the previous problems. so, as previously mentioned, i am on cyanogenmod 11 (on 4.4.2). here are some of the problems i am aware of or rather, those that i have experienced:
1. calls - whenever i dial a number, the screen goes black as if the phone is next to my ear (could there be something wrong with the proximity sensor? i haven't done anything to rectify this yet though. when this happens, i can't do anything as the seems to hang although i could see the call timer working. during that call however, i can't hear a sound nor the person i just rang. same thing happens when someone calls me. my phone vibrates (because there is another problem with the sound which i will discuss next) and when i answer it, i hear no sound and the screen goes black and i couldn't do anything with the phone. i have to wait till the caller disconnects before the phone becomes useable again.
i tried calling using viber and the same thing happens.
2. sound - phone is muted even though all the volume controls are midway or almost 100%. i tried changing the ringing tone but i don't hear any sound at all. normally, when i switch to a different ringtone, it should give me a preview of what the chosen sound is like.
3. videos - it doesn't work. when i go to youtube, it opens up the site, opens the selected youtube clip, tries to play it but pauses then tries to play again then pauses until i get a message saying "there was a problem while playing. touch to retry."
so far these are the problems i have faced.
sorry for the long post again.
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
es0tericcha0s said:
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
Click to expand...
Click to collapse
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Noypi14 said:
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Click to expand...
Click to collapse
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
es0tericcha0s said:
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
Click to expand...
Click to collapse
I put the screen protector when i got the phone and i don't see any visible dirt so i wouldn't want to blame it either. Although i did read about the screen protectors causing problems. But the thing is, even youtube or any videos do not play. Even any sound.
I've tried the slimkat rom by following the developers' instructions and still no youtube, no sound, can't make a call as i can't hear the person i'm calling nor can that person hear me.
Any other suggestions on what to do? I don't mind going back to stock as long as i get all the features back. I went to official 4.3 before but had more severe issues. Or perhaps i did it wrong?
Thanks..
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
es0tericcha0s said:
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
Click to expand...
Click to collapse
Thanks.
Got hold of the official 4.4.2 and flashed it via odin. Failed. But tried again and now working fine. Sound is back, video is back as well as calls. Just the annoying google search failing all the time.
The baseband it has is I9505XXUFNC9. i didn't install any modem in odin though. Just flashed in the pda section the tar file
Now i don't know whether to root this again and try custom roms or leave it as it is. I saw knox by the way but haven't installed it. Or is it pre installed? I have little knowledge about knox
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Verilin said:
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Click to expand...
Click to collapse
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
topherk said:
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
Click to expand...
Click to collapse
No, didnt realize that i needed to do that. I'll do some research on it because i don't have any idea how to update the bootloader. If you have a link to a good tutorial that would be wonderful! Thanks!
Ok so i tried that, found this tutorial, followed it, no luck. Tried full wipe/reset after that to see if it would let me install the hltespr versions, still no dice. Same situation, mobile data works, calls don't. Will have to wait till daylight to try texting so i don't wake anyone up but i suspect that texting won't work either. Has anyone experienced this and fixed it? Lol i really didn't drop $100 on a phone to be saddled with all the Samsung and Sprint baloney that it comes with, don't wanna unroot....
Bump
Anyone have ideas on this? Have continued to try fooling around with the udater-script file to resolve the status 7 problem so I can install the hltespr variant, still no dice. Please someone help!
Bump!
Sorry, I typically don't have access to XDA forums on the weekend, so couldn't answer your question till now.
You flashed only the baseband/modem, not the Bootloader. If you want to update the Bootloader, you need to use ODIN to flash the Complete OTA NH7 Update.
In order to update the Bootloader, you need to make sure that you use the PC ODIN (not the mobile one) and that you completely power off the phone before you enter download mode (don't access download mode by using the extended power menu when shutting down the phone). I don't think you need to do the battery pull that Freeza had in his instructions (I didn't do it when I ODIN-flashed the NH7 OTA update), but it wouldn't hurt to do it.
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Verilin said:
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Click to expand...
Click to collapse
Well, I always recommend a full wipe (data, system, cache, dalvik) when flashing ROMs. I haven't wiped my internal storage or external storage since I got the phone, so that's not really necessary.
I don't think that unrooting your current ROM is necessary. Flashing the ODIN OTA update will automatically remove root access, so that's not an issue. Here's the steps I took when I updated to NH7 and installed my current ROM (see my sig):
Make a Nandroid backup.
I always do this just so I have a "record" of what I left behind. It also allows me to have all of my app data that I can restore via Titanium Backup (you have to buy the Pro version in order to restore specific apps from a Nandroid backup). I always store a copy on my ext. storage and on dropbox.
Do a full wipe
As I mentioned above, I always wipe data, system, and the caches when flashing ROMs. While I have to take some time to get the new ROM exactly as I like it, it minimizes any potential FCs and errors that some people get when dirty flashing.
Install NH7 all-in-one via ODIN
I installed the NH7 via ODIN. Please note that this is the fully stock, unrooted ROM and will also install the stock recovery.
Let the phone boot and connect to Sprint. Update Profile and PRL.
I do this periodically whenever I go back to stock (from AOSP). I rarely have connection issues, but updating the PRL an profile can help with those.
Install a custom recovery using ODIN.
My recovery of choice is TWRP, but others have found just as much success with CWM and Philz. Just make sure that you're installing the correct version of the recovery (4.4.X version, not the 4.2.X version). I always reboot to the main system after installing a recovery, but that's up to you. In the rest of this post, I'll say "TWRP," but I really mean "custom recovery."
[OPTIONAL] Make a Nandroid backup of the stock ROM
I always do this, but I recognize that it's not necessary, especially since we can just ODIN back to this image at any time. I just like having the option of having a stock backup on the device (in case catastrophe strikes while I'm away from a computer).
Use TWRP to flash your AOSP ROM of choice.
If you haven't installed any apps or messed around with the settings, you shouldn't have to wipe before flashing, but (in case you haven't noticed by now), I tend to err on the side of caution, specifically: wiping everything (data, system, and the caches) before I flash anything.
Set up the ROM how you like it and [OPTIONAL] make one last Nandroid Backup
Whenever I set up a new ROM to the exact way I like it (statusbar settings, accounts set up, apps installed and configured, etc), I make a nandroid backup of my device. This allows me to go back to that "fresh" image whenever something happens to the device and I don't have to muddle around fixing those minor tweaks. Again, I tend to err on the side of wiping the phone too often and taking too many backups, but I've rarely had issues with my phone and ROMs because of it (to the point where I can spend most of my XDA time helping others with their phones), so it might be prudent to follow the advice.
Anyways, that's how I upgraded to NH7 and installed a custom ROM. Others may take a less conservative approach and you're welcome to adjust any of the optional steps.
Hope this helps!
-Topher
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Verilin said:
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Click to expand...
Click to collapse
Dumb question but are you a Verizon customer or Sprint?
Sent from my SM-G900P using Tapatalk
Sprint, I've had big red before but when they did away with unlimited data it wasn't worth paying their high rates.
Bump!
Anyone have any ideas on this? I am just confounded as to why this continues even after being reset to stock.
Same Issue!!!
I have the exact same issue and have been trying to resolve it for the last 2 days... Did you find a solution?
I have the same problem on a Samsung Mega. LTE and 3G data work but phone won't dial if LTE is active. It WILL voice dial if only 3G is active. Sprint. CM11.
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
thanks forget the little things reset wifi and sprint cell extender
GAPO said:
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
Click to expand...
Click to collapse
Ok, i'm fairly new to this stuff but have successfully rooted and modified several of my devices over the years. I've been attempting to upgrade my vs985 to as close to stock 5.1.1 as i can and after much reading decided on jasmine. I was rooted on kk 4.4.2 12b and I had no problems. the main reason i wanted to upgrade was for compatibility with my android play car stereo. I didn't have twrp so first i downloaded flashify and quickboot then flashed twrp from flashify. All good so far. Next I downloaded jasmine 9.0 and 9.1 or at least i thought lol. As it so happened i mistakenly ended up with one of the files being just the kernel for 5.1.1 35b. Must of been a long day cause I mistakenly failed to backup my current system and proceeded wipe data, cache, dalvik, and flashed the kernel file. As you might imagine it didn't turn out very good. I was stuck in boot loop. Fortunately I could still get into download mode so I was able to use the lg flash tool and I brought it all the way back to 10b stock firmware. Then i grabbed stump and rooted and flashed twrp again. at some point i noticed my cell signal was all over the place, up, down , no signal and it roamed almost constantly if there was any signal. I've had this phone and service for well over a year and never had anything like this at all. I knew it was something I did. I checked the back cover to be sure it was on properly and had good connection with the antenna and all checked out. I decided to go ahead and do the upgrade to jasmine 9.1 hoping this would correct the issue. Well no dice. I did create a backup this time and proceeded to wipe everything and flash 9.0 reboot then wipe nothing and flash 9.1, i guess as you call it "dirty" then reboot again. Here is a link to where i got the zips and instructions
http://forum.xda-developers.com/showpost.php?p=63305722&postcount=4842
in the instructions it says "RESET factory from within ROM (in Settings) - REQUIRED" . this step seemed strange as why would i do a factory reset on my device and erase everything i just did? would it not return it to original? I wasn't even sure if that was what he meant so i skipped that. After all was finished my signal was still all over the place could hardly make a call. it was bad. So once again I used lg flash tool and returned it to stock 4.4.2 10b, this time I wiped the data, cache, delvik and system. To my complete surprise the signal had not improved, in fact it could have actually been worse. As I said waaaaaay at the top of this post before i started all this i was running 4.4.2 12b, not sure how i ended up with 12b as i don't remember any upgrades after i downgraded to 10b and rooted. I froze the ota's with titanium backup but maybe 12b was pushed before i was able to freeze them. Anyway I couldn't figure out how to get 12b back now so I just flashed the 4.4.2 12b modem instead, This time I wiped cache and delvik before and after the flash then rebooted. This fixed my signal, everything seems normal now. no roaming and good signal. my software build however still shows 10b, but I guess thats correct since I only flashed the modem.
I really want 5.1.1 on my G3 but I need my signal too lol. can any one help me figure out how to get this done, can I flash the 12b modem on 5.1.1 this is where i got the file
http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641 it is way down the bottom of the page. Sorry for the extremely long post i just wanted to make sure i didn't leave any details out.
Any help would be greatly appreciated,
thanks in advance
@Allen227
i dont know if jasmine flashes the L modem when you flash it, but if it doesnt, that would be why you are having issues after flashing the rom.
other than that, i dont know what would cause modem issues.
bweN diorD;4132606 [user=7106818 said:
@Allen227[/user]
i dont know if jasmine flashes the L modem when you flash it, but if it doesnt, that would be why you are having issues after flashing the rom.
other than that, i dont know what would cause modem issues.
Click to expand...
Click to collapse
@Allen227
TL;DR but yes, JasmineROM flashes the appropriate modem. v9.0 only flashes the 24B modem because it doesn't contain a fuller set of the necessary partitions to allow the 35B modem to work by simply replacing the 24B modem with the 35B one.
You can flash the 35B bootstack after flashing JasmineROM 9.0 and the 9.1 update, or SkyDragon 6.x, but you must not be on the 35B bootstack before flashing either UNLESS you also flash the 35B bootstack again after flashing the ROM.
For reasons why: http://forum.xda-developers.com/showthread.php?p=64064555
Edit: I meant to add, the 35B boostack contains the 35B modem and everything needed for it to work with JasmineROM 9.0/9.1.
Hi, anybody from bosses ,plz help, sorry for noob querry... using g3 stock rom 4.4.2 and want to upgrade to lollipop and find jasmine ROM most votes. rooted my device with king root and installed twrp 2.8.7.0 recovry. downloaded jasmin ROM9.0, back up my current rom.
can u please guide me steps,
have i too flash kernal before jasmine ROM? or my existing stock kernal will work fine with jasmine 9.1
placed downloaded ROM in my download folder in phone memory [not in sd Card] , when i would boot in recovry in wipe cache delvik etc will it erase this rom and phone data too???
what if something gone rom? in my g3 there is no option of adb , adb does not work on my g3 dont know why.....
if something gone wrong , can i recover phone?
please see attached pics for some clarification...
sorry for,long post, actualy want to be safe ,,, as i am new for these things ..
tAheEr73 said:
Hi, anybody from bosses ,plz help, sorry for noob querry... using g3 stock rom 4.4.2 and want to upgrade to lollipop and find jasmine ROM most votes. rooted my device with king root and installed twrp 2.8.7.0 recovry. downloaded jasmin ROM9.0, back up my current rom.
can u please guide me steps,
have i too flash kernal before jasmine ROM? or my existing stock kernal will work fine with jasmine 9.1
placed downloaded ROM in my download folder in phone memory [not in sd Card] , when i would boot in recovry in wipe cache delvik etc will it erase this rom and phone data too???
what if something gone rom? in my g3 there is no option of adb , adb does not work on my g3 dont know why.....
if something gone wrong , can i recover phone?
please see attached pics for some clarification...
sorry for,long post, actualy want to be safe ,,, as i am new for these things ..
Click to expand...
Click to collapse
In the future, please do not post the same thing in two different threads. This is against XDA's forum rules. Also, no reason to hijack an only partially related thread. I answered you in the JasmineROM thread.
Sorry for rule breaking, actually i did not aware of that. will avoid surely next time and thanks for reply. hats off to you.
Thanks for your help guys. Last night I figured out my phone was allowing me to send and receive text messages and make outgoing calls but was completely unable to receive any calls. Signal still terribly inconsistent, it would be on 4g one minute then you could watch as it dropped then no service. There'd be no service for 3 or 4 minutes then it would repeat that cycle again. If I switch from global to cdma/let in settings it would immediately regain full signal. Then the cycle of it dropping out would start again. I got to looking through about phone in settings and realized my imei number was missing, all zeros. I'm assuming that probably is the root of my problems. Not sure what to do, I doubt Verizon can help. Phones not insured or under warranty anymore. I haven't researched this New development on te forums yet it got to late last night. If anyone knows of this problem I could use your help. Thanks
Allen227 said:
Thanks for your help guys. Last night I figured out my phone was allowing me to send and receive text messages and make outgoing calls but was completely unable to receive any calls. Signal still terribly inconsistent, it would be on 4g one minute then you could watch as it dropped then no service. There'd be no service for 3 or 4 minutes then it would repeat that cycle again. If I switch from global to cdma/let in settings it would immediately regain full signal. Then the cycle of it dropping out would start again. I got to looking through about phone in settings and realized my imei number was missing, all zeros. I'm assuming that probably is the root of my problems. Not sure what to do, I doubt Verizon can help. Phones not insured or under warranty anymore. I haven't researched this New development on te forums yet it got to late last night. If anyone knows of this problem I could use your help. Thanks
Click to expand...
Click to collapse
If you go into the main Verizon G3 section or possibly the non-Verizon G3 section and use the search field to search for "IMEI" you'll probably find a helpful thread. I think it involves the QPST program on a Windows PC. You'll need the IMEI that it's supposed to have, so hopefully have that on the box or Verizon's website lists it.
Sometimes that's seemed to happen for some people when flashing TOTs, KDZs or ROMs. I've been lucky, it hasn't happened to me through all my flashing over the past year. Once you get it fixed, rooted and put TWRP on, you can back up the IMEI partition in TWRP. It's called something else in TWRP like EI or something - I forget.
Good luck!
roirraW "edor" ehT said:
If you go into the main Verizon G3 section or possibly the non-Verizon G3 section and use the search field to search for "IMEI" you'll probably find a helpful thread. I think it involves the QPST program on a Windows PC. You'll need the IMEI that it's supposed to have, so hopefully have that on the box or Verizon's website lists it.
Sometimes that's seemed to happen for some people when flashing TOTs, KDZs or ROMs. I've been lucky, it hasn't happened to me through all my flashing over the past year. Once you get it fixed, rooted and put TWRP on, you can back up the IMEI partition in TWRP. It's called something else in TWRP like EI or something - I forget.
Good luck!
Click to expand...
Click to collapse
Thanks again I will check that out now
Allen227 said:
Thanks again I will check that out now
Click to expand...
Click to collapse
I have spent sooooo many hours on this. The qpst apk wont see my phone I have done everything the tutorials suggest. the instructions are only applicable if there are no issues, in other words, in a perfect world. I'm sure its something stupid and very simple but I don't even have a place to start. First, its hard to believe this works on all OS's, but it doesn't state anywhere what it is and isn't compatible with. that info would be helpful. i have spent 4 hours a day for over a week trying to get this fixed and I'm no closer than i was when I started. Very frustrating. I'm still open to suggestions or any help that can be offered.
I currently have a lollipop rom version 5.1 (3.4.10-Nuk3rn3l) that has many quircks which make my DNA fairly unpleasant to use. I'd like to flash a build that is solidly reliable, even if it means downgrading.
What are my options? It is extremely daunting to wade through the endless posts of this development forum to find one that is stable.
What quirks are you having? Are you on the latest firmware and used the recommended recovery to flash? These HTC phones are very picky and can cause some undesired effects when flashing against recommendations of OP. I would assume you are running @santod040's GPE rom. His roms are pretty darn stable if installed correctly. If you did follow install procedure exactly as recommended and still have issues, try his nusense rom.
Yeah, I'd love to hear what instability issues("quirks") you might be having with my GPE port...I'm unaware of any.
Those who have issues and don't ask about them with logs or details, can't expect much.
You can always go back to a stock Kitkat Rom if the hard work of others isn't appreciated.
Sent from my HTC6525LVW using Tapatalk
santod040 said:
Yeah, I'd love to hear what instability issues("quirks") you might be having with my GPE port...I'm unaware of any.
Those who have issues and don't ask about them with logs or details, can't expect much.
You can always go back to a stock Kitkat Rom if the hard work of others isn't appreciated.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I appreciate all you do and it probably does have something to do with not having the most up to date software. I am experiencing a lot of little things that combine to be very frustrating in day to day use. In no particular order; I cannot send consecutive text messages without cycling airplane mode, the restart option when holding the power button has disappeared, every few days the phone will shut off and will be unable to be turned back on without plugging in a power cable (this has something to do with user input but I have yet to recognize the pattern that causes it), apps will frequently crash, the phone no longer automatically connects to wifi networks, and a few other things.
I don't know what info you would need, my kernel is 3.4.10-NuK3rn3l-dlx-GPE-Lollipop_v2.00 . Build number is LMY470.H6
I love that people are still developing for this phone, I just think a lot of this custom firmware business goes over my head.
Those issues sound like firmware outdated and some odd stuff that only an ruu can fix. Below is the most up to date ruu for this phone. Before you flash, be sure to back everything up to an external storage device (PC, USB otg, etc). After you ruu, flash the recommended recovery in the rom thread and then clean flash the rom (wipe data, cache, system). Do not restore the nandroid backup. It could be something software that is causing the app FCs.
http://forum.xda-developers.com/showthread.php?t=2935556
Edit: I know for a fact the Wi-Fi issue is because of outdated firmware, others might be wrong recovery, but to save the hassle, just ruu to be safe.
Do me a favor: Run "fastboot getvar all" and take a look at line three and six. I am having the exact same issues as you. My line 3 for baseband was version 1.02.01.0818, NOT the 1.02.01.0207 that the latest firmware thread stated it should be. My line 6 (version-main) was blank. After flashing the latest radio zip it now shows a 1.02.01.0207 for baseband and 4.09.605.1 for version-main. This isn't my main phone anymore so its not activated in a way that i can test it. However it may be a starting point for you. I'd be curious if you have the same radios that my phone did.