[Q] OTA Update Center and Existenz Ultimate Z2 ROM ver. 3 - Xperia Z2 Q&A, Help & Troubleshooting

Hi at all,
im very new to Android and Flashing a new Rom. I finally after some time came to decision to Flash my Phone.
This ROM is great love all the features and im very proud at my self to learn so much about Recovery, SoftBricks and allot more...
Now to topic:
Im having Issues that OTA Update Center tells me that - rom.ota.prop and kernel.ota.prop is missing
How can I fix this issue?
Rom im using is: Existenz Ultimate z2 ver. 3
Many Many thanks in advance
LordNIcon
EDIT: Forgot that i still use a locked bootloader

Read the thread. This has been answered many many times.
Sent from my D6503 using Tapatalk

Hi m8,
i have read the thread and on ROM Post it does not state that issue.
On the Posts ive went thru allot 20-30 Pages and used the search. No such issue has been found.
Thanks for the warm welcome....

LordNIcon said:
Hi m8,
i have read the thread and on ROM Post it does not state that issue.
On the Posts ive went thru allot 20-30 Pages and used the search. No such issue has been found.
Thanks for the warm welcome....
Click to expand...
Click to collapse
It states the issue a lot as everyone asks, no one searches. If you did read the thread you would know this is normal. The error will be fixed once athe first OTA update has been released. Up until now, no ota update has been released and that's why you see that message.
niaboc79 said:
...
Q: When I go in OTA Updater setting, I have an error message (Invalid ROM & device combo!)...
R: Don't worry, this is normal until the first OTA Update.
...
Click to expand...
Click to collapse
Thanks for reading and searching
Sent from my D6503 using Tapatalk

Hi,
i dont have that error...
Please read my O.P. - Thanks...

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The wording in the FAQ is not word for word but it's there. It would've been something else you didn't read. Trust me, I have answered your question.
Sent from my D6503 using Tapatalk

Then Thank you allot - o0 Matt 0o - for pulling up with me asking.
This means then wait for a ROM update from the Dev. Like this the OTA Updater works.
Got it - But still this is a great ROM

Flash EXISTENZ V3.1.5 and you'll get rid of that error...

HFidalgo said:
Flash EXISTENZ V3.1.5 and you'll get rid of that error...
Click to expand...
Click to collapse
Yup i noticed - Thanks m8

Related

[Q] Mainver 3.10.605.7 !!! opps

Hey my mainver was 3.10.605.07 because i downloaded a ROM with that
anyway I flashed a new rom and opened the android.text and changed it
accidentally to 3.10.605.7 .... so will i have to enter that for every ROM for a long, long time? or will the 3.10.605.13 flash over that when it becomes widely available
if not or anyways: Is there a way to change my phones mainver lower? or am i screwed till a RUU comes out past 3.10.605.7
Thanks in advance
P.S. thanks all Dev's i have flashed almost every ROM on the List
RoryHe said:
Hey my mainver was 3.10.605.07 because i downloaded a ROM with that
anyway I flashed a new rom and opened the android.text and changed it
accidentally to 3.10.605.7 .... so will i have to enter that for every ROM for a long, long time? or will the 3.10.605.13 flash over that when it becomes widely available
if not or anyways: Is there a way to change my phones mainver lower? or am i screwed till a RUU comes out past 3.10.605.7
Thanks in advance
P.S. thanks all Dev's i have flashed almost every ROM on the List
Click to expand...
Click to collapse
When it updates, yes, your mainver will update to the new one. Until then, though, you can use one of these fixes...
Fix 1
Fix 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
zetsumeikuro said:
Click to expand...
Click to collapse
Lololololol so true...
Sent from my ADR6425LVW using XDA App
I don't get why people don't just use the "edit the android.text file" fix EVERYTIME they hit a mainver error??
Seems to me that is by FAR the simplest fix, ALWAYS WORKS and it takes about five seconds.
I keep an extra android.text file on my card just in case I need it.
jmorton10 said:
I don't get why people don't just use the "edit the android.text file" fix EVERYTIME they hit a mainver error??
Seems to me that is by FAR the simplest fix, ALWAYS WORKS and it takes about five seconds.
I keep an extra android.text file on my card just in case I need it.
Click to expand...
Click to collapse
Hence the double face palm for the OP.
Or they could use that nifty new thing we have here, called a search button.
Sent from my ADR6425LVW using xda premium
EmerikL said:
Or they could use that nifty new thing we have here, called a search button.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
What is this search button you speak of? I thought it was just a mythical beast like dragons and unicorns

[Q] New member

Hey guys!
yesterday i have update my s2 from 4.0.1 ics to 4.1.2 jelly bean..i get the update from samsung-downloads.com.
it return there its official jb update, so i update using odin...
once i successfully update it,its reboot and its appear a C logo (Clara) after that only its shows samsung logo..
i was happy with the update but there are some unwanted app that cannot been uninstall..so i just hide the app's...
also there is a speech when i slide to next page..its really make me think that im using a toy phone :crying:
can anyone get me the real/OFFICIAL Jelly bean 4.1.2 or 4.2 or 4.3 update for my samsung galaxy s2?
Even you guys can email me if anything. * [email protected]
Much appreciate if anyone help me in this thing...
From Malaysia
[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
U have downloaded a branded official update i guess... Search for a UNBRANDED rom
For those crappy apps... Just disable them in application manager
Sent from my GT-I9100 using Tapatalk 2
doctor_droid said:
U have downloaded a branded official update i guess... Search for a UNBRANDED rom
For those crappy apps... Just disable them in application manager
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i have disabled those apps successfully but im still not happy with th C logo at the startup?
You don't post a thread in both Q&A and General about the same issue for starters :-/
MistahBungle said:
You don't post a thread in both Q&A and General about the same issue for starters :-/
Click to expand...
Click to collapse
sorry im new and i dont know to post in which thread so i post in both to get the best answer...by the way for my problem where should i post??
HemanAhtn said:
sorry im new and i dont know to post in which thread so i post in both to get the best answer...by the way for my problem where should i post??
Click to expand...
Click to collapse
Q&A Forum
Thread moved.
ApriliaM3 said:
Q&A Forum
Thread moved.
Click to expand...
Click to collapse
thank you mate
by the way any idea to solve my problem?
HemanAhtn said:
thank you mate
by the way any idea to solve my problem?
Click to expand...
Click to collapse
Well as I said flash an unbranded firmware ... thats it

Cannot connect to camera

I started off with omnirom then skydragon then cm11. All of them just didn't hit it for me. Then I stumble across pacman rom and I love it.
But every time I try to open the camera it gives error cannot connect to camera. I click OK and it just fcs.
I've spent days reading about it and how the boot.IMG may have something to do with it but every time I flash one my phone fails to boot.
Can someone pls help me out
Sent from my One using Tapatalk
S-off or s-on. If s-off run ruu. It should fix image issues. Was it working on stock or just when you rooted?
Sent from my Rezound running sense 5. S-OFF
I'm not sure if I'm s on or off. I've got twrp recovery and rooted blah blah. Lol if that helps.
Since I discovered the camera wasn't working on pacman ive flashed my previous ROMs and the camera has no problems. Its only on pacman... I've tried older nightlys and redownladed the ROM several times to make sure it wasn't a bunk dl
Sent from my One using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my One using Tapatalk
cameronmfjay said:
I'm not sure if I'm s on or off. I've got twrp recovery and rooted blah blah. Lol if that helps.
Since I discovered the camera wasn't working on pacman ive flashed my previous ROMs and the camera has no problems. Its only on pacman... I've tried older nightlys and redownladed the ROM several times to make sure it wasn't a bunk dl
Sent from my One using Tapatalk
Click to expand...
Click to collapse
It seems you've narrowed it down pretty good ...why not ask in the Pacman forum? It's clearly an issue with their rom
clsA said:
It seems you've narrowed it down pretty good ...why not ask in the Pacman forum? It's clearly an issue with their rom
Click to expand...
Click to collapse
I did a couple of days ago and the only help I got was "Mine works flawlessly."
...
Ha
Sent from my One using Tapatalk
cameronmfjay said:
I did a couple of days ago and the only help I got was "Mine works flawlessly."
...
Ha
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Well if they don't support their own rom whay are you using it ?
try ViperOne or InsertCoin or ARHD .. they have Great developers that support their work, not leave you hanging

Can't update SU Binery so I can root my GS3

Hi I'm new to this site so forgive any mistakes i make.
I'm trying torroot my Samsung galaxy s3 hhowever superuser
Keeps asking me to update SU Binery, I have the latest Twerp
Installed, my phone was rooted however I tried to remove it
So I could update my phone the legit way but it says iI have
A mod rom, I'm running jellybean 4.3 . Any help would be appreciated
mwelf74 said:
Hi I'm new to this site so forgive any mistakes i make.
I'm trying torroot my Samsung galaxy s3 hhowever superuser
Keeps asking me to update SU Binery, I have the latest Twerp
Installed, my phone was rooted however I tried to remove it
So I could update my phone the legit way but it says iI have
A mod rom, I'm running jellybean 4.3 . Any help would be appreciated
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can flash the SuperSU zip from TWRP to root your device.
___
v7
XDA Assist
Hi, firstly thanks for replying, secondly do you have any guidance for that
I read many posts on here I just find them confusing and
Always getting lost in something else I start reading about
mwelf74 said:
Hi, firstly thanks for replying, secondly do you have any guidance for that
I read many posts on here I just find them confusing and
Always getting lost in something else I start reading about
Click to expand...
Click to collapse
Here's the link to.
*[RECOVERY][i9300] TWRP 2.8.6.0 touch recovery
*SuperSU 2.46
*[GUIDE][GT-I9300] TWRP Flashing using Odin for GT-i9300
___
v7
XDA Assist
Thanks very much, I'll update you with the outcome layer.
Hi again, does this look right to you? Oh I was going to send you some screen shots but don't know how to upload photos. It gets worse
mwelf74 said:
Hi again, does this look right to you? Oh I was going to send you some screen shots but don't know how to upload photos. It gets worse
Click to expand...
Click to collapse
Visit the forum from Tapatalk/browser.You'll find an option to manage attachments.
___
v7
XDA Assist
I don'tssee any options . I think im going
To give up its ggiven me a headache
mwelf74 said:
I don'tssee any options . I think im going
To give up its ggiven me a headache
Click to expand...
Click to collapse
You can upload the pics to an image host and PM me the link.I'm happy to help
___
v7
XDA Assist
I really appreciate your help,however I'm just getting more
Confused, what's an image host? I'm realising I know absolutely
Nothing about phones
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[SURNIA & OTUS] CypherOS Q&A Help and Troubleshooting

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the Question & Answer thread for AOSCP CypherOS,
if you have any issues with anything
pertaining to this wonderful rom then feel free to post a comment
and we'll do our best to answer your question.
Please try to read through the posts on this thread after they've been left
so as to not waste our time by reiterating what's already
been discussed and therefore enabling us to tend to more inquiries that haven't been answered yet, thank you!!
#BeTheCypher #Surnia #Otus #Nougat #CypheriZeD!!!​
I am planning to flash from 3.1.1 to 3.1.3. Do I need to do anything different during flashing for this ROM? Eg. Gapps?
Hope there are enough people looking into this thread.
Sonel Prabhakaran said:
I am planning to flash from 3.1.1 to 3.1.3. Do I need to do anything different during flashing for this ROM? Eg. Gapps?
Hope there are enough people looking into this thread.
Click to expand...
Click to collapse
If 3.1.1 is based off AOSP 7.0 then yeah, you need to download the 7.1 variant of opengapps. Otherwise no. check you r about phone to see if it's 7.0 or 7.1
[SURNIA & OTUS] CypherOS Q&A Help and Troubleshooting
rushabshah32 said:
If 3.1.1 is based off AOSP 7.0 then yeah, you need to download the 7.1 variant of opengapps. Otherwise no. check you r about phone to see if it's 7.0 or 7.1
Click to expand...
Click to collapse
I was on 7.1. But never mind because the dirty flash was successful but I stumbled upon a major "bug". I had previously used a 6 x 6 pattern lock but this was disabled in 3.1.3. I was stuck with a 3 x 3 pattern lock that I didn't make and couldn't unlock the device. Had to clean flash the build.
Sent from my iPad using Tapatalk Pro
Volte works? What are the bugs as of now?
Anyone know where i can find the correct baseband for the virgin mobile (sprint)?
Thank you and sorry for my bad english.
Wifi error
I would like to know if at some point they are going to fix the error that happens when you teach the wifi and the mobile data? In the otus version
On 3.5.1 OTA works?
Alf_Doge said:
Anyone know where i can find the correct baseband for the virgin mobile (sprint)?
Thank you and sorry for my bad english.
Click to expand...
Click to collapse
Wrong thread but PM me and I'll send you there.

Categories

Resources