Related
Ok, So I've recently updated to stock gingerbread 2.3.3 with baseband .35. I rooted my phone with the SuperOneClick method. Root was successful (Finally).
I then wanted to install a custom ROM, so I installed ClockworkMod's ROM manager, flashed the clockwork recovery image and everything. I decided to make a backup image in case I didn't like the new ROM. I then selected the "Backup Current ROM" option, and left my phone to it's own devices. When I got back about 5 minutes later, I find that I have a hard reset on my hands :| To add to that, I don't even have a backup image!
I tried doing that a couple times more, once, I even held the POWER+VOL.DOWN+HOME combo and all. The same thing happened each time. The recovery backdrop and a sliding progress appeared, after about 4 seconds, the progress bar stopped moving, it shifted back to the LG boot logo. If I kept the combo pressed, it would go on and on for about 5 times, if I released it, it would just continue on to the boot and I would get another hard reset every time. I tried "Reboot into Recovery". Same thing. Once, I selected "Install ROM from SD card", with the backup option selected. Somehow or the other, due to the combo or something, I came to a screen that had four options.
1) Reboot
2) Install from SD card:update.zip
3) Wipe data
4) Wipe dalvik cache and cache
I was able to scroll up and down with the volume rocker, but the only other button that worked was the Home button, which toggled between the screen I mentioned above and a screen where all of the text was removed and there was just the recovery background. I finally popped out the battery and booted, and got yet ANOTHER hard reset.
HELP!
It seems Clockworkmod recovery was not flashed correctly. What you see is the stock android recovery. The recovery key mapping is:
volume rocker-up/down
menu (left most button)- select current option
back - go back
the behaviour you see when pressing the home button is normal.
After using Rom manager to install CWM recovery, it is not recommended to do further operations through rom manager, best uninstall it. Instead, boot into recovery using the three button combo and do operations from there.
I would suggest try again to re-flash CWM recovery.
mihir287 said:
After using Rom manager to install CWM recovery, it is not recommended to do further operations through rom manager, best uninstall it. Instead, boot into recovery using the three button combo and do operations from there.
I would suggest try again to re-flash CWM recovery.
Click to expand...
Click to collapse
Thanks, but do you have any idea WHY using ROM manager is a bad idea? Just curious.
snitch_95 said:
Thanks, but do you have any idea WHY using ROM manager is a bad idea? Just curious.
Click to expand...
Click to collapse
Well, one reason I've encountered is that while flashing cwm recovery, if the download fails for some reason, Rom mananger has flashed the incorrectly downloaded file without verification resulting in a fastboot semi-brick for many users.
Another reason is related to the way it operates the recovery. I'm not very sure about this point, but I've seen many people having problems with backups and flashing.
Thanks, you were brilliant. I flashed another recovery from ClockworkMod, this time with a WiFi connection, and everything worked great.
I was updating firmware of my LGP500 optimus one using kdz updater for 2.2 to 2.3.3...
battery level might be 40 to 50%.....
at the end i got an error and phone turn off.. now i tried to start it again but its not turning on....
any key combination is not working.. like home+down vol+ power_button or..
return+ up_vol+power_button,,,, what to do to get my phone turn on ??
even when i plugged in it to charger or USB cable .. it shows nothing on screen...
hardik.gcet said:
I was updating firmware of my LGP500 optimus one using kdz updater for 2.2 to 2.3.3...
battery level might be 40 to 50%.....
at the end i got an error and phone turn off.. now i tried to start it again but its not turning on....
any key combination is not working.. like home+down vol+ power_button or..
return+ up_vol+power_button,,,, what to do to get my phone turn on ??
even when i plugged in it to charger or USB cable .. it shows nothing on screen...
Click to expand...
Click to collapse
after the kdz method i think that u can do nothing, if u r under warranty then give your phone back and just say after trying to update through original lg software ur phone would not start at all. or try reading and asking in this thread
I am on 2.2.1 and I installed CWM recovery via ROM manager through wifi. Everything is perfect but whenever I go into recovery it just boots and resets my phone. Its my friends phone and I need help. I have tried other recoveries too but it is the same problem. Please help.
djdhruv said:
I am on 2.2.1 and I installed CWM recovery via ROM manager through wifi. Everything is perfect but whenever I go into recovery it just boots and resets my phone. Its my friends phone and I need help. I have tried other recoveries too but it is the same problem. Please help.
Click to expand...
Click to collapse
try to reflash recovery again and select reboot recovery from rom manager itself after flashing recovery
if still it doesnt work then flash recovery by below method
http://forum.xda-developers.com/showthread.php?t=1318750&highlight=recovery+through+lgdmp
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
huvikman said:
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
Click to expand...
Click to collapse
Keep the stock fw ready to be flashed using flashtool, enter into flashmode and flash it !
Sent from my Xperia U using xda app-developers app
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
huvikman said:
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
Click to expand...
Click to collapse
Its volume down key and Plug in USB, to enter flashmode
Not back button.
Or flash a kernel by fastboot mode, enter CWM and install the ROM (assuming you have the zip file in the SD card )
Sent from my Xperia U using xda app-developers app
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
huvikman said:
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
Click to expand...
Click to collapse
yes green LED it is,
i hope you had the flashing process ready at the PC right ?
First make sure your phone is shut down. long press power+vol up until you feel 3 vibrations.
From there you can try fastboot mode or flash mode.
Utensils vioment
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
huvikman said:
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
Click to expand...
Click to collapse
I recall I had that issue with wundows 7 at the beginning, what I did then was to boot my windows xp and managed to flash from there.
I have tried many things since, and if I am not mistaken it's installing flahtool drivers that fixed it finally.
I think there are 3 drivers there you need to install.
nifileb Naval
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
maknom66 said:
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
Click to expand...
Click to collapse
It was on JB stock. I'll check if I cano boot to CWM now or have to redo all that stuff and then try flashing Phantom Kernel and then Moonbreak. Will let you know
xperia p
huvikman said:
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
Click to expand...
Click to collapse
yup bl will always be unlocked regfardless of what rom you flash unless you relock it
yup if you have to install cwm again then if you want it and you have to first root it again as well
------------------------------------------------------------
Xperia P PAC rom jb 4.2.2 user
hit thanks if i helped
Thanks everyone for the input, issue resolved, kernel and rom flash was successful.
Stuck on boot
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
rocker55555 said:
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
Click to expand...
Click to collapse
The rom probably won't work if you delete /system so reflash stock JB first maybe this will help: http://forum.xda-developers.com/showthread.php?t=1849170
Facing exact same issue i think
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Hi
I think im facing a very similar issue, i m very new to this and therefore didnt understand the solution. I did visit the developer site for emma, but can you tell me the exact thing to do after starting Emma. I mean, when do i connect the phone and how, what commands to give. Below is explanation of how i got into this and what all ive tried.
OK i ve been trying to flash a new custom rom on my Xperia P, i looked at a number of guidelines and doing things step by step.
Since im very new to this i downloaded a few Roms. I was following the guide "http://droidors.com/2014/07/08/update-xperia-p-lt22i-to-android-4-4-4-kitkat-with-slimkat-custom-rom/2/" and everything was going fine. I reached the step to "fastboot flash boot boot.img", i did that and then went on the next step to boot in CWM Recovery and install the zip rom and the Gapps. During the Zip Rom install i got status 7 error.
Now, i noticed that i might have flashed the wrong Rom so rechecked the guide and installed the correct Rom which is mentioned in "http://forum.xda-developers.com/xperia-u/p-development/rom-slimkat-4-4-2-release-candidate-t2657795" . But now THE PROBLEM IS, AFTER I FLASHED THE INCORRECT IMG, MY PC IS NOT RECOGNISING THE XPERIA P SAYING IT DOESNOT RECOGNISE THE DRIVERS, therefore im not able to copy the ROM Zip on the SDcard, to then run it from CWM.
After sometime i tried the below
Ok, now i tried to flash the stock Rom through this link "http://forum.xda-developers.com/xperia-u/p-development/ftf-firmware-xperia-p-generic-world-t2322163", through flashtool to bring my phone back to life. I installed the drivers as per instructions from drivers folder, but for some reason the pc is just not accepting. I did install through this exact method yesterday night and it worked perfectly.
Please suggest. I hope im asking at the right place.
Urgent help please
I forgot to mention, after I flashed the SlimKat Rom, and things went out of hand ( till this point i could see Slimkat logo at boot and could also go in CWM Recovery ), I tried to restore through Nandroid Backup i had done. As soon i selected the restore option and then the backup file, within 2-3 seconds the phone went off, and then on boot all i can do is see "SONY" on screen. Nothing else happens.
I ve tried all this on a different machine, with different wires and different USB port, no luck
Kindly advise, im stuck with no spare phone.
Solved i guess
OK Brother,
I downloaded EMMA and am currently downloading the service. It is very self explanatory. What was amazing is when i recognised my phone "What a sight "
Flashtools wasnt able to do that, so i guess the manufacture tools are damn important ( i wasnt exactly of the opinion before )
Also it is downloading Android 4.0.4 Build 6.1.1.b.1.54, which first came on the device, which also makes me think may be i should have tried that rather than trying to flash with the JB Rom all this while.
Man, i was scared. Thanks for this thread Bro.
God Bless
Will inform once the phone is booted up to confirm it worked.
Emma Worked
OK guys, I can confirm its EMMA "Flash tool for Xperia" fixed the problem for me. It installed 4.0.4 on it.
Also there is a pdf in the Download which guides about the usage.
Sigh
Correction- it installed the latest stock ROM jb
Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
In download mode is the product number shown or a blank?
If it shows i9300 then you have a good chance of flashing either a full stock rom or a rescue firmware (see general forum) using odin. You will need to factory reset in recovery afterward, but your data is almost certainly unrecoverable.
If the product number is blank then you have partial SDS and require a new motherboard.
Sent from my GT-I9300 using Tapatalk
rachypoo said:
Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
Click to expand...
Click to collapse
Do has boomboomer said above but as a last resort before flashing back to stock or a rescue firmware if you flash PhilZ recovery in download mode with odin.You then have a Aroma option in PhilZ recovery to browse and copy phone files so you may be able to recover some data pictures etc.
Please read PhilZ thread >> http://forum.xda-developers.com/showthread.php?t=2201860 << and the special features thread about Aroma file manager in post #3
Please note use as a last resort to get your data back! and read everything! Also all this is presuming you can get into PhilZ recovery after flashing..
I'm having the same problem , been looking through lots of topics. When I switch on the phone it's not booting android guy lays on his back. Download mode and Android Recovery are in my range.
I've been trying to flash stock-firmware from sammobile.com with ODIN but no effect , I mean It all went OK in Odin Operation list than fially phone reset and PASS. But this android guy is still laying on his back and making fun of me xD
Before trying to get back to stock ROM, I've had rooted phone and installed RR with 4.4.2 for S3, now I don't have a clue what shall I do next ...
Any ideas ? (the noob[me] have asked )
Stuck on samsung logo
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Teamdaiwa said:
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Click to expand...
Click to collapse
You buggered the partitions .
Remove partition .
SOLVED >>
I have solved my problem with this lying android guy on his back , after trying to get back stock. So the thing was on my phone there have been left the kernel from Resurection Remix , I have updated it to Custom Kernel from this topic
http://forum.xda-developers.com/showthread.php?t=2563562
And my newest version of stock firmware is swimming very nice I hope This will help someone
Hello, Im here looking for some help with my Sony Go ST27i, yesterday I rooted it successfully, but then I tried to flash a better kernel via recovery and it went down, since that I cant turn it on, when I try it it blinks the battery light (red color), I've done some research and every website and every forum give the same solutions:
-use the keys combinations to do hard reset
-flash origianal ROM via fastboot
the problem is that none of this worked, I'm starting to get worried, cuz I think theres no way back (
I checked with that weird command *#*#.....#*#* and my device doesnt allow to enable bootloader.
vascoc said:
Hello, Im here looking for some help with my Sony Go ST27i, yesterday I rooted it successfully, but then I tried to flash a better kernel via recovery and it went down, since that I cant turn it on, when I try it it blinks the battery light (red color), I've done some research and every website and every forum give the same solutions:
-use the keys combinations to do hard reset
-flash origianal ROM via fastboot
the problem is that none of this worked, I'm starting to get worried, cuz I think theres no way back (
I checked with that weird command *#*#.....#*#* and my device doesnt allow to enable bootloader.
Click to expand...
Click to collapse
Alright. Plug your device into a wall charger. In all likelihood it will bootloop. Let it stay there for some time(preferably overnight). After that, try to get into fastboot. Once you're in fastboot, flash the stock kernel back.
For more help go here: http://forum.xda-developers.com/showthread.php?t=1849170
So here is what happened.
I have a Samsung S3 i9300 with android jellybean (4.3). I wanted to play Pokemon GO real bad (damn me ! ) so I tried rooting my phone and upgrading it to 4.4.
I used the kingoroot from PC and successfully rooted my phone. Then i downloaded the TWRP manager app in my phone and went to install recovery (i have no idea what that is but i went as per instructions given on TWRP website), chose my device, the latest image available and then selected "install". It ran and then gave me a pop up that it is not successful because either the image is not for my device or my phone's "something" is locked (i don't exactly remember what it was.. but i searched and found out that Samsung galaxy S3 i9300 has "that" feature always unlocked). Then it gave me an option to "Reboot Now" and i chose that, which hanged my phone. I pressed the home button and it went to the home page and the phone was working OK besides the TWRP manager app which was stuck. So what I did was that I restart my phone using the power button. My phone restarted and then I got a black screen and the LED which indicates the charging status was blue (with changing shades), It got me worried so I took out the battery. When i put it again it was DEAD
I tried the soft reset, hard reset but no luck.
When i connect it to my PC it does give that connected sound but nothing else.
same thing i also ttied to play pokemon go
Tomorrow i will try to use a jig mayba that can help me to get in to download mode
shujahatali92 said:
So here is what happened.
I have a Samsung S3 i9300 with android jellybean (4.3). I wanted to play Pokemon GO real bad (damn me ! ) so I tried rooting my phone and upgrading it to 4.4.
I used the kingoroot from PC and successfully rooted my phone. Then i downloaded the TWRP manager app in my phone and went to install recovery (i have no idea what that is but i went as per instructions given on TWRP website), chose my device, the latest image available and then selected "install". It ran and then gave me a pop up that it is not successful because either the image is not for my device or my phone's "something" is locked (i don't exactly remember what it was.. but i searched and found out that Samsung galaxy S3 i9300 has "that" feature always unlocked). Then it gave me an option to "Reboot Now" and i chose that, which hanged my phone. I pressed the home button and it went to the home page and the phone was working OK besides the TWRP manager app which was stuck. So what I did was that I restart my phone using the power button. My phone restarted and then I got a black screen and the LED which indicates the charging status was blue (with changing shades), It got me worried so I took out the battery. When i put it again it was DEAD
I tried the soft reset, hard reset but no luck.
When i connect it to my PC it does give that connected sound but nothing else.
Click to expand...
Click to collapse
fer4282 said:
Tomorrow i will try to use a jig mayba that can help me to get in to download mode
Click to expand...
Click to collapse
Best of luck ! I hope you succeed.