Dim mode is slightly too dark even in indoor lighting to glance at for the time, I know I could just choose a better watch face, but is there also anyway to adjust the brightness level of "dim mode" when the watch is set to "always on"? Thanks.
I was looking for this too. I'm guessing it's a kernel related thing so perhaps the custom kernel that was just released might be a good place to look
Related
I just installed Android 2.1 and rooted it. In the brightness setting there is no longer a selection to choose the Auto-brightness setting, just a slider for low and high brightness.
Also I noticed the Power Widget that has the brightness control switch lets you switch between low, auto, and high, but while in Auto (the dimmer setting while the button is ON), the sensitivity is very poor and will only brighten the display by about 10% while moving from a very dark environment to a very bright environment.
Yup, i agree. This sucks. Although i had forgoten how nice everything looks with the brightness turned up. All the same id like to have it back.
Sent from my X10i using XDA App
cant expect everything in 2.1 to be perfect. Yes it has taken them a while but i wouldnt expect it to be without any flaws!
At least we got it finally. WOOOOOOOOOOOOOOOT
azian_advanced said:
I just installed Android 2.1 and rooted it. In the brightness setting there is no longer a selection to choose the Auto-brightness setting, just a slider for low and high brightness.
Also I noticed the Power Widget that has the brightness control switch lets you switch between low, auto, and high, but while in Auto (the dimmer setting while the button is ON), the sensitivity is very poor and will only brighten the display by about 10% while moving from a very dark environment to a very bright environment.
Click to expand...
Click to collapse
I thought this today too but the Auto Brighten IS there and still working, just a bit differently.
Initially you choose the 3 levels of brightness on the quick select from the 5 widget icons. This is the brightest it will go, but if you go from a dark or light room it DOES indeed still adjust.
I noticed this after a bit today just standing in the kitchen watching the movers do their thing at my old place. The sun was ducking in and out of the clouds and the auto function was working fine. I tried it in all 3 modes, the only one it doesn't do anything in is the least bright mode...the one I noticed it most is the middle bright mode.
So YES, it is indeed working, just differently.
The auto Brightness sucked in 1.6 anyway. It was never that good for me. I use a brightness widget to adjust it.
I much prefer the way it works now. Seems to be a lot more user friendly tbh
have you tried the setting in spare parts (from the market)?
I've not tried it myself, but I know the auto setting is there.
Auto birghtness
Hmm. I have the 2.1 update and I have set the brightness to the low setting in the power widget. The brightness still adjusts automatically, and I don't want it to. I want it to stay at a low level all the time to save my battery. How?!
Is there a way to add the Auto Adjust Screen Power setting to roms that do not have this setting? I would like to use some of these great roms but they are too dim for me. To see what I am talking about, if you have this setting, check mark it and you will see all the apps become very dim and for some reason all the roms that do not have this setting have it have this set by default with no way to uncheck it. It would be great if this could be added to all our roms cause my vision cannot take the strain of the dim screen.
Any devs listening?
I read in another phone thread there was a screen xml that controlled the level of auto brightness and could increase the level over 100% so you could see the screen better in daylight.
So it is possible but I have no skill or clue.
Auto brightness... What happened? It used to just work. You know, automatically. If you adjusted the slider it would snap out of Auto mode and lock to what ever you set it at. Going back to full auto was a s simple as selecting the checkbox again in the quick settings.
I don't know if it's part of Marshmallow or TouchWiz but now the brightness slider controls the automatic-ness of the brightness. So its more like a auto "range selector" or "sensitivity selector" it seems. Its more of a semi-automatic mode.
If you set it to ~50% the brightness will adjust +/- 10% around that setting. But it doesn't seem to just automatically do 0-100% on its own anymore.
Set it near 100% and it'll practically refuse to dim in low indoor lighting.
It also seems to respond to whether or not you're holding the phone. It'll get brighter no matter what (thankfully), but it will not lower the screen brightness until you put it down on a horizontal surface... Kind of annoying if you're reading and happen to walk in to a dim room and you're being blinded by your phone until you put it down and then pick it back up. I have Smart Stay turned off so that's not it.
I definitely prefer the plain old, dumb, just works, auto-brightness that I could snap on and off if I needed. Now its...complicated. Why "fix" what isn't broken. Was it confusing some people?
I tried Lux Brightness control app but I'm not sure it's really what I'm looking for. It's too much. I just want "set it and forget it" Automatic (0-100%) brightness like it used to be.
It's a feature. The brightness slider will now bias the automatic setting toward higher or lower brightness while still maintaining the automatic adjustment functionality. Turn off the automatic setting check-box to accomplish full manual control.
What ever happened to just plain Automatic? I don't want to have to mess with a slider. It adjusted the brightness fine before. I find that now it's either too bright or too dim for many situations and I'm constantly messing with the slider. Whereas before, auto was just auto.
Same problem here... It is very annoying
Sent from my SM-G925F using XDA-Developers mobile app
Interestingly, with my old s3 and now my current s6, when looking at battery usage, the screen was always about 15% and usually the second item in the list of things that use the most battery power. It was what I always loved about amoled. Now, screen is number one and comes in at ~50% after the marshmallow update. I wonder if it's because it's always so bright now? Or perhaps they've changed how battery usage is measured. Not much I can do about it. Just an a interesting observation.
The minimum brightness level on this phone is quite a bit higher than other phones with OLED panels. Is there any way to change this? Using power saving mode with the screen at minimum brightness makes the screen a bit dimmer and so does inactivity so we know the screen definitely has the capability to go darker. Anyone know how we can make the brightness darker?
P.S no screen filter suggestions pls
I use Lux Auto Brightness, screen can go significantly darker
Out Of Code said:
I use Lux Auto Brightness, screen can go significantly darker
Click to expand...
Click to collapse
And that would work for me but the only issue is the software buttons at the bottom don't dim with the screen and it's really weird looking. That's why I said no screen filters, please.
ethanscooter said:
And that would work for me but the only issue is the software buttons at the bottom don't dim with the screen and it's really weird looking. That's why I said no screen filters, please.
Click to expand...
Click to collapse
It's not a screen filter, what would even make you think that? Plus it does dim the software buttons. Maybe it's because you don't have root?
If you on 7.0, try "Night Mode Enabler" from the PlayStore.
On my Z Play, the Lux app does not dim the buttons either. I don't have root. OTOH I don't recall seeing in the Lux documentation that it uses root for anything?
Also, I'm 90%+ certain that Lux *is* a screen filter. I say that because it differentiates between two ranges of brightness: "above zero" and "below zero". It seems likely that the "below zero" settings (which are necessary to get the display very dim at all) are modifying the display data rather than the system brightness setting. Of course, on an AMOLED screen this should be just as good... except for those darn buttons!!
BTW, all of this "night mode" stuff has, unfortunately, just confused the issue for those of us who need to preserve our night vision while using our phones. "Night mode" has come to mean "make the color temperature redder" because that seems to avoid some of the ill health effects of blue light at night. But it doesn't do squat to preserve night vision---for that you need to get the brightness way, way down. If you're trying to use your phone at the telescope, you're just as screwed as before, only now, the google search terms are more polluted, making it harder to find an actual solution.
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
I use an app called Lux. Tons of options with it.
todd3835 said:
I use an app called Lux. Tons of options with it.
Click to expand...
Click to collapse
It doesn't actually lower the brightness some sort of overlay , no?
lowspeed said:
It doesn't actually lower the brightness some sort of overlay , no?
Click to expand...
Click to collapse
Hmmmm, Im not sure how it works but it does have an auto mode which you can tweak on the fly.
I have noticed that also. It also jacks up the contrast to make it easier to see.
It makes pics you took look terrible when viewing them outside. I had to learn to NOT delete them until I check them indoors. I assumed some pics I took were crap at first, but it was just the jacked screen contrast that made them look bad.
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
bandit_knight said:
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
Click to expand...
Click to collapse
That's exactly what happens to me. Also if you slide the screen you can see how it the colors are totally distorted.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
sourabh.note said:
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
Click to expand...
Click to collapse
Did you read what the problem is? outdoors it snaps to max no matter what. (Unless not in auto mode)
Any solution for this problem?
Turn off auto brightness when outdoors..
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brightness mode or shine a led light at the sensor when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time?
haircut123 said:
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brighmess mode or shine a led light at the sending when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time
Click to expand...
Click to collapse
Never had a screen burn in on a Samsung phone. Don't worry
Guys, idk if this is a S10 only feature (or Android Pie), but when I'm on that situation, if I lower the brightness slider and leave it there for a second or two, the brightness will actually stay down and not jump back up again. Worth a try.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
After the S9+'s update to Pie some of the old settings get copied to the new OS, but if you don't go into the settings and check, things might not be configured correctly - I had to choose a different setting and then choose again what was previously selected to ensure that it was written into the Settings correctly.
With the new update the "Automatic Brightness" applies to the AOD - see here in this screenshot, my search of the Settings for the word "auto brightness", see what comes up in attachment #1.
What you need to do is go to the "Adaptive Brightness" and turn it on, then manually adjust your brightness under a few different conditions (EG: Indoors lights off, outside and overcast, and bright sunny day). Now your phone will understand what setting you want for different conditions and automatically adjust the brightness based on lighting conditions, see attachment #2.
The "auto brightness" is now used for the AOD, and has nothing to do with brightness when unlocked. The reason it "auto snaps to full brightness" is likely because previous settings were just copied over after the update and you haven't setup (and trained) the new "Adaptive Brightness" for various light levels. The AOD has both "Auto Brightness" and double-tap the clock to adjust AOD brightness.