Hello XDA,
An quick poll here regarding the finger rest dimple on Nexus 6 and how cases address the issue.
Would you prefer that your case had a hole for the finger rest on the back, covered it, or had a dimple in the case without making a hole that served a similar purpose?
Poll closes in 24 hours. If you look at Moto X cases for comparison you can see how different case manufacturers addressed this issue.
My opinion is that I do not use that location to rest my index finger, especially on a phone this large, so it should be covered. Having a hole leaves a place for dust/dirt/debris to enter into the back of the case and potentially scratch the phone. Making a good dimple in the case itself is probably only possible on a thicker case, on a thinner case youd end up with a very shallow dimple. If the material gets too thin it can easily warp.
Personally I would have it covered. I agree when you say that having it exposed could lead to debris being caught up inside and then scratch the back of the phone, and I second the option for a dimple. Can't wait to see the cases you guys have to offer
Covered
yeah i think a shallow one would be good i hate those cases with a little hole for example with iphones dirt always ends up in them not to mention how showy off they look
Shallow would be best!
I would like a very shallow dimple built into the case. Although on a phone this massive, it probably won't make much of a difference because you're going to use it with two hands.
Covered for sure
brinsons5 said:
Covered for sure
Click to expand...
Click to collapse
A good way to see is to view Moto X 2014 cases to see whats out there.
I have a 6 inch device now, a One Max, and I can tell you that your finger CAN'T rest in that dimple most of the time. Your thumb would need to be twice as long lol.
Go with closed. Really awesome for you to come on XDA and ask by the way.
Closed
Sent from my SM-N900T using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Judging by the poll results, you might have to design 2 cases.
Well I guess I don't have to ask if there will be a Diztronic case for this thing
Thanks everyone. The likely course of action will be that we'll do both a covered case and one with a dimple.
Our regular TPU will be full matte (not matte back like our nexus 5 case, full matte like our OnePlus case) and have no dimple, it will just cover that area same as our Moto X 2nd Gen case does. Customers seem to of been very happy with our Moto X case thus far.
Then our 2nd case, which will essentially be the Voyeur case like we made for Nexus 5, except it will not have the window. When we make this style without the window we call it our "Ultra TPU Case". We made the Ultra for GS5 and LG G3. It's a slightly thicker
case than our normal TPU, and has reinforced corners. I really like it myself, and this is the case that I use on my own phone. This one will also be full matte, no glossy lip like before. Since this case is a bit thicker, we have more room to work with as far as creating
a dimple on the back of it. I'll try and make just a slight concave area on the back of the case in the same spot that Motorola did on their Nexus 6.
So in short, we will have a solution for both camps. It seems no one wants a hole on the back of their case, so I'm glad I asked. I've seen competitors do it so I thought maybe it was worth trying, but apparently not!
Going to get the ball rolling on these ASAP so we can be ready for release day or close to it. We definitely wont have them ready by the day pre-ordering for Nexus 6 starts, but hopefully we will have them ready by the time the phone actually gets to customers hands.
-Clay
OneStepAhead said:
Thanks everyone. The likely course of action will be that we'll do both a covered case and one with a dimple.
Our regular TPU will be full matte (not matte back like our nexus 5 case, full matte like our OnePlus case) and have no dimple, it will just cover that area same as our Moto X 2nd Gen case does. Customers seem to of been very happy with our Moto X case thus far.
Then our 2nd case, which will essentially be the Voyeur case like we made for Nexus 5, except it will not have the window. When we make this style without the window we call it our "Ultra TPU Case". We made the Ultra for GS5 and LG G3. It's a slightly thicker
case than our normal TPU, and has reinforced corners. I really like it myself, and this is the case that I use on my own phone. This one will also be full matte, no glossy lip like before. Since this case is a bit thicker, we have more room to work with as far as creating
a dimple on the back of it. I'll try and make just a slight concave area on the back of the case in the same spot that Motorola did on their Nexus 6.
So in short, we will have a solution for both camps. It seems no one wants a hole on the back of their case, so I'm glad I asked. I've seen competitors do it so I thought maybe it was worth trying, but apparently not!
Going to get the ball rolling on these ASAP so we can be ready for release day or close to it. We definitely wont have them ready by the day pre-ordering for Nexus 6 starts, but hopefully we will have them ready by the time the phone actually gets to customers hands.
-Clay
Click to expand...
Click to collapse
loveeeeee diztronic cases
Stupid question, what is a dimple in this case? And, yes, I had to laugh when the device has a dimple.
Silly question maybe, but I have the matte black for my nexus 5 and I love it. What is the difference between full matte and matt black that you mentioned? Is it just a color thing? I want the same feel as the one on the nexus 5 ideally. I googled oneplus and diztronic case, but I am only seeing full matte black...
OneStepAhead said:
Thanks everyone. The likely course of action will be that we'll do both a covered case and one with a dimple.
Our regular TPU will be full matte (not matte back like our nexus 5 case, full matte like our OnePlus case) and have no dimple, it will just cover that area same as our Moto X 2nd Gen case does. Customers seem to of been very happy with our Moto X case thus far.
Then our 2nd case, which will essentially be the Voyeur case like we made for Nexus 5, except it will not have the window. When we make this style without the window we call it our "Ultra TPU Case". We made the Ultra for GS5 and LG G3. It's a slightly thicker
case than our normal TPU, and has reinforced corners. I really like it myself, and this is the case that I use on my own phone. This one will also be full matte, no glossy lip like before. Since this case is a bit thicker, we have more room to work with as far as creating
a dimple on the back of it. I'll try and make just a slight concave area on the back of the case in the same spot that Motorola did on their Nexus 6.
So in short, we will have a solution for both camps. It seems no one wants a hole on the back of their case, so I'm glad I asked. I've seen competitors do it so I thought maybe it was worth trying, but apparently not!
Going to get the ball rolling on these ASAP so we can be ready for release day or close to it. We definitely wont have them ready by the day pre-ordering for Nexus 6 starts, but hopefully we will have them ready by the time the phone actually gets to customers hands.
-Clay
Click to expand...
Click to collapse
frigidazzi said:
Silly question maybe, but I have the matte black for my nexus 5 and I love it. What is the difference between full matte and matt black that you mentioned? Is it just a color thing? I want the same feel as the one on the nexus 5 ideally. I googled oneplus and diztronic case, but I am only seeing full matte black...
Click to expand...
Click to collapse
I did the same thing. Only matte black..no full matte.
OneStepAhead said:
Then our 2nd case, which will essentially be the Voyeur case like we made for Nexus 5, except it will not have the window. When we make this style without the window we call it our "Ultra TPU Case". We made the Ultra for GS5 and LG G3. It's a slightly thicker
case than our normal TPU, and has reinforced corners. I really like it myself, and this is the case that I use on my own phone. This one will also be full matte, no glossy lip like before. Since this case is a bit thicker, we have more room to work with as far as creating
a dimple on the back of it. I'll try and make just a slight concave area on the back of the case in the same spot that Motorola did on their Nexus 6.
Click to expand...
Click to collapse
Glad to hear you guys will be making the Ultra TPU case for it, I'll be buying one as soon as you let me!
Please make a case as thin as the Spigen Air case for the new iPhones!
http://www.spigen.com/brands/apple/iphone/iphone-6/iphone-6-plus/iphone-6-plus-case-air-skin.html
I have yet to find a case for any phone (other than apple) that caters to those who don't want to put stickers on their phone and are not concerned with drop protection.
I just want something that I don't have to worry about when I set it down and get micro-scratches on the back.
Phone manufacturers spend a significant time on design, I'd like to feel that as close to original without going caseless.
-Thin as can be, just a layer
-Soft touch, fingerprints are gross on glossy
-Clearly not worried about drop protection
Related
I've seen quite a few reviews / post on the SGP NeoHybrid series cases but nothing on the Linear Color series, thus I figured I'd post some quick photos and share my comments.
After several reviews on how the NeoHybrid series sags after while I decided to stay away from that model and try the Linear Color series. I found out the frame is of the same material as the NeoHybrid, just the back is different / hard plastic. I wanted a two-tone look, thus ended up ordering 2 cases, one in Silver and one in Black. First let me say I absolutely LOVE these cases. I think the look is absolutely gorgeous and the fit is spot on. I read reviews about the back being loose on the international version of the SG2 but this is not the case with our model. There is absolutely no movement of the back case. The cases are also a little different between the Black and Silver. The Black has a high gloss while the Silver has a bit of a flat texture to it. This works well with the combo of the cases as you don't have a full slippery phone with the all black and you have nice break in the texture with introducing the gloss black to the silver case. Overall I would highly recommend this case. The picture I have do not do the cases justice. Additionally these cases include the Ultra Crystal screen protector which is installed in the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for the review. Can you confirm if the case covers the top mic? Also, how well does the side piece fit the phone? Is a youtube review it looked like the side piece was bowing out a bit so every time the buttons were pressed, the case would clearly flex.
Wow those cases look sweet. Thanks for the info.
Sent from my SAMSUNG-SGH-I777 using XDA App
tboooe said:
Thank you for the review. Can you confirm if the case covers the top mic? Also, how well does the side piece fit the phone? Is a youtube review it looked like the side piece was bowing out a bit so every time the buttons were pressed, the case would clearly flex.
Click to expand...
Click to collapse
The case does indeed cover the top mic, however I believe it can easily be fixed by some of the methods described in this forum (hot nail, small drill, etc). I plan to give it a shot on mine this weekend. Will try to post some update pictures with a better camera when I do. As far as the case, there is absolutely no bowing / flexing taking place. If it's the same youtube video I saw, they mentioned they had attempted to put the case on with one of those skins on and that make the case bulge a bit as they forced it on. The two I have fit like a glove and again have no movement of the back plate as described for the international version.
Case
I like the pics, and I am in the market for a case. I am definitely going to check these out.
I got my Linear case today and I must say I like it alot! I go Soul Black which has a glossy finish to it which I prefer. Because of this glossiness, the case can be slippery though but i dont mind. The case has a nice lip on front side so laying the phone face down is no problem. The fit is well done too. With a 3 piece case, I was worried how snug it would fit together. Rest assured, everything feels nice and snug. I also verified my phone, wifi, and gps signals are not negatively impacted by this case , unlike my CaseMate Barely There Aluminum which I also like the look of but could not deal with the greatly degraded gps signal.
My only complaint, and this definitely more of a preference, I wish the lip on the front side was a not so high. Swiping from edge to edge, my finger hits the edge. Its not a big deal though.
Overall, I would recommend this case!
I would get one, but I'm thinking about taking my SGS II back next week for the LG Nitro HD when it comes out. It's nice to know there are some good, reasonably priced cases for this phone, though.
Sent from my SAMSUNG-SGH-I777 using xda premium
tboooe said:
I got my Linear case today and I must say I like it alot! I go Soul Black which has a glossy finish to it which I prefer. Because of this glossiness, the case can be slippery though but i dont mind. The case has a nice lip on front side so laying the phone face down is no problem. The fit is well done too. With a 3 piece case, I was worried how snug it would fit together. Rest assured, everything feels nice and snug. I also verified my phone, wifi, and gps signals are not negatively impacted by this case , unlike my CaseMate Barely There Aluminum which I also like the look of but could not deal with the greatly degraded gps signal.
My only complaint, and this definitely more of a preference, I wish the lip on the front side was a not so high. Swiping from edge to edge, my finger hits the edge. Its not a big deal though.
Overall, I would recommend this case!
Click to expand...
Click to collapse
Hmm...I like my Neo Hybrid case but it's a pain whenever I want to remove it to access the microsd card or when I had to peel off an old screen protector and place a new one one. Been thinking about this case and was wondering if you could post or PM me pics? (Probably gonna go with soul black as well since I don't want to buy a white & black to keep my stormtrooper look -- unless someone's willing to buy the black shell with white backing?)
Thanks!
DefTaker said:
Hmm...I like my Neo Hybrid case but it's a pain whenever I want to remove it to access the microsd card or when I had to peel off an old screen protector and place a new one one. Been thinking about this case and was wondering if you could post or PM me pics? (Probably gonna go with soul black as well since I don't want to buy a white & black to keep my stormtrooper look -- unless someone's willing to buy the black shell with white backing?)
Thanks!
Click to expand...
Click to collapse
Alright I will post some pics later. I will say that removing this case is pretty easy however, I dont think I would advise doing it too many times. There are little clips that attaches the bottom part to the frame. I imagine these clips could wear over time if the case is removed too many times.
tboooe said:
Alright I will post some pics later. I will say that removing this case is pretty easy however, I dont think I would advise doing it too many times. There are little clips that attaches the bottom part to the frame. I imagine these clips could wear over time if the case is removed too many times.
Click to expand...
Click to collapse
Thanks! Yeah, I don't plan on removing the case too often but I'd also like it NOT to be such a PITA when I want to take it off. It's really the only negative thing I ahve to say about the Neo Hybrid case. I wish they offered a white shell w/black backing instead of having to buy 2 different color cases though since they offer the white shell with pink, turquoise, etc. <-- NO black backing, ReaLLY?
are there 2 different versions of this case? galaxy 2 att and international?
cwilliams1983 said:
are there 2 different versions of this case? galaxy 2 att and international?
Click to expand...
Click to collapse
I believe it's the same case - the only difference is that you'll get the correct Steinheil screen protector without the home button cutout that comes with the i9100 (aka international) version. The case itself fits either although since the i9100 is a bit slimmer, the back supposedly wiggles whereas it should fit flush on the i777.
Ugh...so I went ahead decided to get the Infinity White Linear case and got it today...
Sux, it doesn't fit right. The bottom part won't clip into the rest; only one side clips in properly as if the width is not right. I've emailed SGP's customer service so they can RMA and get me a new case (I'm going to be pissed though if they try to charge me for shipping & handling).
I'm really surprised that it doesn't fit. I hope I just got one from a bad batch.
I sent an SGP neohybrid case back on the 14th of november and still waiting on my refund. had to pay for the shipping back.
Jamlx1 said:
I sent an SGP neohybrid case back on the 14th of november and still waiting on my refund. had to pay for the shipping back.
Click to expand...
Click to collapse
Was the product defective (my Neo Hybrid fits fine but I wanted the Linear case for easier access to my microsd card and battery)?
If it was defective, then you shouldn't have to pay to ship it back.
I'll just have to wait and see...don't know what case to get if they don't RMA and send me a Linear case to fit...(thought about the Taurus but don't want the metal case to interfere with GPS).
sent back due to wrong screen protector being sent, and had also read about how the rubber back saged over time. i bought one of the s line cases off ebay for like $5 and it fits perfect and didnt increase the size much.
Jamlx1 said:
sent back due to wrong screen protector being sent, and had also read about how the rubber back saged over time. i bought one of the s line cases off ebay for like $5 and it fits perfect and didnt increase the size much.
Click to expand...
Click to collapse
Ok, then yes it would make sense that they charge you for shipping. But in my situation, the bottom part of the case doesn't fit properly. I'll look at the S line case you mentioned and see how that is. Thanks.
does anyone with the samsung 2000mah battery using with this case WITH the backing on?
Hi Gang,
I tried submitting this to Supcase itself on the product page of their website, but they have reCaptcha issues, I couldn't so it - So I was able to submit to them via the form for contacting them, which didn't have the same issue.
I figured that it could also be used here. Link to product (get through Amazon though, cheaper) and review I typed up:
http://www.supcase.com/google-nexus-6-unicorn-beetle-clear-bumper-protective-case.html
"New Nexus 6, and wanted a good looking case to go with it. Over at XDA Developers, the discussion drifted towards several, however the Supcase Hybrid jumped out at a lot of us besides myself.
I cannot speak to actual protection, nor do I really want to find out, however the case arrived 1 day before the phone, and my thoughts follow after 2 days of use (I have the Frosted Black):
Awesome aesthetics! - From the bevels on the front edges of the lips at the screen edge to the overall looks and integration of the outer PC ring to the TPU shell, it just looks fantastic. It doesn't, in my opinion, add any real size to the phone itself. The ridges give it some grip, and the TPU seems to be grippy enough for me (especially if you have a little sweat as you are getting used to handling this beast).
The cutouts work well, I only noticed a slight misalignment of the microphone hole on the back, that could be just due to the phone, or manufacturing, but overall it is not a deal breaker, enough of it is there to make it only noticeable as if one is writing a review, in operation no one would be able to tell (there are those who would just drill it out a bit and issue solved, I don't feel it necessary.)
Having the dimple for the Motorola symbol and the camera cutout make great reference points for using your hand holding it if not taking a pic/video, the phone is well balanced and once you have had it a couple of days you know what you can and shouldn't do with it in that regard. (I use Voice to text a lot, so I do not feel the urge to do one handed typing).
The power button and volume rocker are tight - in a good way - meaning you definitely have a solid feel to both. While others feel that the power button should have a different feel, or ridges on it to separate it from the rocker, my feeling on this is that for this phone, you only have the power and volume rocker, is it really that hard to know what you have slid your finger onto? (Realistically I would have preferred if Moto had placed the volume rocker on the other side as like my old Galaxy Nexus, that accomplished separation, plus if Supcase had made one like this for that phone, each side would lend to give leverage to the other when pressing, I'm saying those buttons are solid, and that's what you want.
I chose the frosted over the black/black, because I want to see the nexus logo, and they didn't disappoint, the phone I have is blue however the frosted areas give it a grey tone even in direct sunlight, and it complements the black outer PC ring. Outstanding.
The only negativity I can find is that on my unit after two days, the upper PC lip seems to be slightly "up" from the phone, this is, I feel, due to me having taken the case off a couple of times, my method was to push te top of the screen up and then corners over to then slide off, it may be that it should be set and forget, but this is not a deal breaker either, it has to give a bit to get onto and off the phone, but it is on, and on good, it's not going anywhere.
That's it for my review - If you want a minimal case to use with the phone that looks great, this is the one to get, as stated I cant say how well it would protect your phone, I've only dropped a phone once, and don't want to try this one, but for the cost they offer for it, you get every penny."
Marc
Nice ?
This is my favorite case so far on this phone. I use the clear one on my white N6 and it looks awesome.
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
bob2300nx said:
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
Click to expand...
Click to collapse
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
pony182 said:
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
Click to expand...
Click to collapse
Thats what I was afraid of based off of the stock pictures. Thanks
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
p3dr0maz said:
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
Click to expand...
Click to collapse
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Thx for the fast response. Those were nice but I wanted skinnier. I ordered Ringke slim gunmetal. Ok, no? It's not for major drop protection I mainly just want to minimize case scratches.
bill3508 said:
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Click to expand...
Click to collapse
For the people who want to see how this case looks with a skin -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not the best pics but give a pretty good idea what the skin looks behind the case. Hope this helps!
RW-1 said:
If you want a minimal case to use with the phone that looks great, this is the one to get
Click to expand...
Click to collapse
I saw this case and immediately ordered it. It'll get here before my N6 will . :crying:
I'm kind of a case whore though, and will probably buy several others before all is said and done. With my Nexus 5, I had 13 cases. Nice little review, thanks.
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
First impressions, it is a really nice premium case. It feels good in the hands, buttons are nice to press on (not as nice as Ringke Fusion but better than Spigen Ultra Hybrid). Doesn't add much bulk, plays nice with my tempered glass protector, cutouts are perfect. The dimple is properly aligned with the case. So far I'm pretty impressed and this is probably the best case in my opinion that shows off the back of the phone.
The camera cutout could be further in but is deep enough to withstand a drop if the phone was to be dropped. The phone with the case inside feel good in the hands.
zephiK said:
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
Click to expand...
Click to collapse
Yea same here, kind of surprising, had never seen free one day shipping before. But ordered yesterday and got it today.
So far, love it. I also ordered a ringke slim and a spigen slim armor. The ringke is easily the smallest case as it is really slim, but it also feels like a cheapish piece of plastic. The spigen was good, but a little bit hefty and the buttons on it were terrible.
This is inbetween in size. Small enough that the added bulk doesn't make the phone seem too big, but enough to feel it offers some food protection. It feels good in the hand and looks great. The buttons are a bit stuff but pretty good.
The only real downside is the small microphone? hole near the bottom of the back is slightly misaligned, as the op said.
Can you guys please compare to the ringe fusion?
Also interested in the difference in bulk between this and the fusion
Supcase feels a little thicker but I think its more that the material is harder. It definitely feels slightly bulkier than the fusion.
Just received mine. First case for my nexus as I just received it today too but damn does it feel good. Buttons feel nice and love the clear back to show off the white. Deff slim and love the way its perfectly designed for the nexus with the indent on the back.
I have the PRO SERIES an man is it good! I've had it on since a week after I got the phone. Only complaint is the camera hole is to long (all the way to the Moto symbol). But the protection is there, feel is good, grip is excellent, all cutouts are lined up great! Add the fact that our N6's are water resistant! I'm feeling safe!
Dachank said:
Also interested in the difference in bulk between this and the fusion
Click to expand...
Click to collapse
There's a difference, but it's not a bad difference. It's bulkier than the Fusion but still very much slim and easy to hold in 1 hand.
bob2300nx said:
Can you guys please compare to the ringe fusion?
Click to expand...
Click to collapse
Major comparisons:
1. Buttons on the Ringke Fusion is a lot better, it's clicky. But by no means that the Supcase buttons are bad, they're actually pretty good and nice to press but Fusion is clicky.
2. The Ringke Fusion back is prone to scratches very easily and depending on what color you get. Crystal View may become "yellowish" over time.
3. The dust covers aren't on the Supcase which is a ++++. Yeah you can cut it off but that's kinda cheap.
4. The Nexus 6 "dimple" is present on the Supcase which is really cool, makes the N6 easier to hold on.
5. Supcase has more grip and feels better in the hands. It is slightly more bulky but doesn't add much bulk when compared to a Spigen Slim Armor or something. Very easy to type with one hand and hold with excellent grip.
I love the look of this case (always have) but I'm concerned with the amount of protection it provides vs the Diztronic Ultra I ended up buying on release back at the end of Nov or beginning of Dec (whenever it came out.. Can't remember).
I've been doing some digging around. So far there are a lot of holster cases and phone carrying cases out there but I am more of a minimalist so I have kept searching. In the past 24 hours, I did see the following cases which caught my eye:
Black Case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clear Frosted Cased
I like the black case overall, but the fact that the Clear Frosted case has 'Idol' engraved on it gives it extra appeal. Personally I'm hoping that a bumper is released soon so that I can show off the fancy back to the Idol 3
I usually go naked nowadays, but I was eyeing the official Alcatel clear shell. Looks pretty thin, and only $12.
arampapaz said:
I usually go naked nowadays, but I was eyeing the official Alcatel clear shell. Looks pretty thin, and only $12.
Click to expand...
Click to collapse
Yeah I liked that one a lot. I hope that they release some more pics of it closer to the release just to be sure.
I have gone without a case here and there but a few reviewers have mentioned the phone can feel slippery at times and so I don't want to risk it.
Going naked with this one. That's the great thing about it being cheap! I did tweet Slick Wraps if they had any plans about supporting this phone. They said they will see how popular it is and they will decide. Imagine black leather on the back of this!
Ever since I got into less expensive unlocked phones I don't use cases much. I get to enjoy the phones as they were meant to be. I have been using a HUAWEI Ascend Mate 2, ZTE ZMAX, and LG L90, all without cases or screen protectors.
arampapaz said:
Ever since I got into less expensive unlocked phones I don't use cases much. I get to enjoy the phones as they were meant to be. I have been using a HUAWEI Ascend Mate 2, ZTE ZMAX, and LG L90, all without cases or screen protectors.
Click to expand...
Click to collapse
I do think that screen protectors are the biggest scam unless you buy a phone with the intention of reselling it every time.
macallik said:
I do think that screen protectors are the biggest scam unless you buy a phone with the intention of reselling it every time.
Click to expand...
Click to collapse
Seriously? When I buy a used phone, the condition of the screen is the single biggest factor to me! Not to mention that some devices feel better to the finger with a tempered glass protector installed. It seems a very logical investment in $5-$10 to get a good screen protector right away.
---------- Post added at 05:03 PM ---------- Previous post was at 04:46 PM ----------
To your original question, I'm going to at least put on a cheap TPU case on the new Idol 3 (if indeed I end up keeping it). Since it's slippery and already thin, a slim case will be a helpful, unobtrusive addition. But there's not much out there just yet.
zhamilton05 said:
Seriously? When I buy a used phone, the condition of the screen is the single biggest factor to me! Not to mention that some devices feel better to the finger with a tempered glass protector installed. It seems a very logical investment in $5-$10 to get a good screen protector right away.
Click to expand...
Click to collapse
That is the point I am making. For me, the only purpose of a screen protector imo is for resale value. Outside of that I feel like it is a detriment to the aesthetics/user experience.
macallik said:
I've been doing some digging around. So far there are a lot of holster cases and phone carrying cases out there but I am more of a minimalist so I have kept searching. In the past 24 hours, I did see the following cases which caught my eye:
Black Case
Clear Frosted Cased
I like the black case overall, but the fact that the Clear Frosted case has 'Idol' engraved on it gives it extra appeal. Personally I'm hoping that a bumper is released soon so that I can show off the fancy back to the Idol 3
Click to expand...
Click to collapse
Idol is not engraved, but rather "showing" through from the back of phone. Check the other pictures and you will see no engraving. I have ordered this; going to check the fit with the case in my Seidio SURFACE Holster for Samsung Galaxy Note 3. Currently using this holster for my OPO with a Diztronic Full Matte Black Flexible TPU Case for OnePlus One and it is a good fit. I find the 5.5." display phones (I didn't say phablet on purpose!) do better in a holster rather than my pocket. Just a preference thing I guess.
naked all the way, the idol 3 is really thin and I'd like to keep it that way. I've had the moto g naked and just a few small scratches. the idol 3 has dragontail glass which should prevent scratches anyway
HughJanus said:
naked all the way, the idol 3 is really thin and I'd like to keep it that way. I've had the moto g naked and just a few small scratches. the idol 3 has dragontail glass which should prevent scratches anyway
Click to expand...
Click to collapse
Dragontail should prevent scratches, I'm more concerned about drops because the backing of the phone is a tad bit slippery based on a few reviews.
that case don"t look that bad,,how about tempered glass?
Ended up buying a cheapo case from eBay as well as the official case from Alcatel's website. The weird thing about the website is that it doesn't allow you to put anything into your shopping cart until you create an account.
Very good
macallik said:
Ended up buying a cheapo case from eBay as well as the official case from Alcatel's website. The weird thing about the website is that it doesn't allow you to put anything into your shopping cart until you create an account.
Click to expand...
Click to collapse
Don't suppose you'd share which case you purchased and was it from overseas? I'm trying to find a cheap transparent hard back case but would consider others....I'm trying to avoid having to wait 30+ days for a case from overseas when my phone should be here in a week or so.
Also does anyone have suggestions for a rugged leather belt holster? I'm unsure what other model phone's have a similar enough footprint as there don't appear to be any out for the idol 3 yet.
famewolf said:
Don't suppose you'd share which case you purchased and was it from overseas? I'm trying to find a cheap transparent hard back case but would consider others....I'm trying to avoid having to wait 30+ days for a case from overseas when my phone should be here in a week or so.
Also does anyone have suggestions for a rugged leather belt holster? I'm unsure what other model phone's have a similar enough footprint as there don't appear to be any out for the idol 3 yet.
Click to expand...
Click to collapse
My original post has a link to the eBay purchase from overseas (China) that I made. Other than that, I got the translucent hard case directly from Alcatel. Neither have arrived yet. If you are in a hurry, the original post I made (LK case from Amazon) apparently ships quickly. I saw a few people on reddit/slickdeals who said that they have received their cases already. Also, I'd dig deeper into Amazon if you are interested in a belt holster. I may have seen one or two of those on there but I didn't post it up since I don't wear belt holsters.
My $3.99 eBay case came in the mail yesterday (7 days after placing my order). I might cancel my $11 official shell case order from Alcatel because this looks like it'll do the trick. Gotta get the phone and see how it feels first I suppose, but I like the feel of the matte on the back as well as how the translucent sides contrast the matte back. Makes it look less cheap than a completely translucent model. Also, no company labeling on the case which is something that turned me off of the LK cases on Amazon.
The dual layer lightning knight or whatever one doesn't fit right for me.
I'm happy w/ the frosted clear Lightning King case. The fit is perfect, and the buttons function very well. TPU cases I'e had on old phones always made actuating the buttons difficult, but not this one.
I'd really like a transparent TPU case, but I think the official Alcatel one plastic rather than TPU, since it's a "shell".
Amazon cacnceled official case order
I had pre-ordered the official Alcatel transparent case from Amazon, today got notice from Amazon that they have to cancel the order. Amazon status now shows not available. Anyone actually manage to get one of these cases, from Amazon or direct from Alcatel?
Hi all,
Now I've had a few more cases come through the door, I thought this would be the opportune moment to start a new thread up and take any questions. I'll be adding the case reviews/thoughts as they come through!
Before I start, you can check out the reviews which were done at the start of the month on the cases that came through first here:
OnePlus 5 Official Protective Cases (Karbon, Sandstone, Ebony Wood)
OnePlus 5 Otterbox & Silicone Protective Case (w/ Orzly/OnePlus TGSP TEST)
OnePlus 5 Orzly FlexiCase & Wallet Case First Look and Review
OnePlus 5 SLEO Hard Case
Spigen Rugged Armor
I'm still awaiting Spigen to put up for sale the rest of their case line in the UK, so for now, the Rugged Armor is the only case I've managed to grab from them. It's very similar to the OnePlus 3 version in pretty much every way!
The Rugged Armor is one large TPU case, it adds a reasonable level of bulk, but also provides a reasonable level of protection. One of my favourite cases so far!
Orzly SlimStand Case
This was a case I bought effectively so I could review it for you guys, however I've found myself using it A LOT. The case itself feels premium, well designed and thing but at the same time I'm happy that it'll provide some impact protection. If it were just the case, I'd be happy- but Orzly have gone a step further and added a stand on to the back of it.
The ringstand on the back of the case, seems to be stuck on well (I've shaken it quite a fair bit) and you can rotate it so you can stand the phone up in multiple different ways. I like it, and I like it even more at the moment as they seem to be selling it for £$4.99
Tudia MERGE Case
Another case that I reviewed last year on the OnePlus 3! As with Spigen & Orzly, I've got other cases on order but Tudia's shipping isn't it's strong point. It took them almost a month to get this case to me, so I'm holding out very little hope that the OMNIX I ordered will be delivered any time soon.
That being said, the case itself is sold, made of two different parts and will provide an adequate level of protection to most people. Be aware that if you've got a skin on your phone, it'll likely rip it off as you remove the case!
MY FAVOURITE: ORZLY FUSION BUMPER
I'll be adding to this post over the next month as more cases arrive!
Amazing.
Waiting spigen neo hybrid case
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
I've just got the silm stand case and I'm actually loving it.
It sounds stupid but it so slim! It's like a protective skin!
The Orzly Fusion case came through today, unfortunately my video camera seems to have given up the ghost. Whilst I try and find some sort of replacement; I've grabbed some photos so you can take a look.
This is absolutely my FAVOURITE case so far. Absolutely worth the purchase in my view!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great idea for a thread! Im loving my flexicases and the slim case I have. Awaiting on my fusion bumper, but seeing as you got yours I should have it soon! Can't wait. The images look great!!
DarkExistence said:
Great idea for a thread! Im loving my flexicases and the slim case I have. Awaiting on my fusion bumper, but seeing as you got yours I should have it soon! Can't wait. The images look great!!
Click to expand...
Click to collapse
After using it for a further day, it's cemented in my mind as my favourite case so far!
niijonodhg said:
After using it for a further day, it's cemented in my mind as my favourite case so far!
Click to expand...
Click to collapse
Great to hear! Would you mind telling me exactly how grippy it is? I see little bits sticking out where your hand would usually rest. I take a lot of photos so if it's grippy that's a win win!
DarkExistence said:
Great to hear! Would you mind telling me exactly how grippy it is? I see little bits sticking out where your hand would usually rest. I take a lot of photos so if it's grippy that's a win win!
Click to expand...
Click to collapse
While I'm not Jono I could answer this.
The zones with extra grip on them are really grippy. I can basically shake my phone with minimal pressure from my hands and it will stay in place. It was a smart idea to put that extra grip where you hand would rest
A Guy Called Revive said:
While I'm not Jono I could answer this.
The zones with extra grip on them are really grippy. I can basically shake my phone with minimal pressure from my hands and it will stay in place. It was a smart idea to put that extra grip where you hand would rest
Click to expand...
Click to collapse
Thanks. How comfortable are the grippy bits? grips van go either way. While I much prefer a phone case to be grippy instead of slippy, in my experience there are different types of grip depending on how soft they are. (grippy bits made of harder plastic materials can sort of stick into your hand and get uncomfortable after a while, but the more softer rubbery types of grip tend to grip well in a way that is really comfortable). Being as you've actually used one of these, which of the two types would you say these are?
They look like the nice soft type in the photos, but I always prefer to hear from hands on experience.
Thanks.
I have the original Bumper Case but my only concern with it is the camera lens on the back. This case is so slim it doesn't raise any protection agains't lens scratches.
Looking at these videos, I like the raised protection on the camera lens of the Spigen case. Sure it is bulky but I rather that and have a good protection.
A Guy Called Revive said:
While I'm not Jono I could answer this.
The zones with extra grip on them are really grippy. I can basically shake my phone with minimal pressure from my hands and it will stay in place. It was a smart idea to put that extra grip where you hand would rest
Click to expand...
Click to collapse
Thanks! No more worrying about doing landscape photography then
AnabolicAndroidz said:
Thanks. How comfortable are the grippy bits? grips van go either way. While I much prefer a phone case to be grippy instead of slippy, in my experience there are different types of grip depending on how soft they are. (grippy bits made of harder plastic materials can sort of stick into your hand and get uncomfortable after a while, but the more softer rubbery types of grip tend to grip well in a way that is really comfortable). Being as you've actually used one of these, which of the two types would you say these are?
They look like the nice soft type in the photos, but I always prefer to hear from hands on experience.
Thanks.
Click to expand...
Click to collapse
I want to say a mixture of the two? The grippy bits are hard but feel like the rest its made of soft touch like the rest of the case. Definitely doesn't get uncomfortable in the hand.
I upgraded to the OP5 from the OnePlus 2, which endured a TON of drops thanks to it's variation of the Spigen Rugged case. I got the OP5 variation soon after buying it, hoping for a similar experience, and I'm glad to say that it's given me just that. Great case, great design and doesn't add a whole lot of weight either.
A Guy Called Revive said:
I want to say a mixture of the two? The grippy bits are hard but feel like the rest its made of soft touch like the rest of the case. Definitely doesn't get uncomfortable in the hand.
Click to expand...
Click to collapse
Yeah, that's the main thing.
On a side note, just an amusing after thought...
Anyone just catching the last sentence hearing us go on about how grippy hard and soft it is might wonder what in the hell we were talking about if they heard that out of context!! (so just for the record, we're talking about the Orzly Fusion case) ......honest!!
AnabolicAndroidz said:
Yeah, that's the main thing.
On a side note, just an amusing after thought...
Anyone just catching the last sentence hearing us go on about how grippy hard and soft it is might wonder what in the hell we were talking about if they heard that out of context!! (so just for the record, we're talking about the Orzly Fusion case) ......honest!!
Click to expand...
Click to collapse
Yeah.... *Looks around* Totally...
Honestly, just talking about the Orzly fusion case.
move along people
I JUST SAID MOVE ALONG
Hey just wanted to give my two cents on the Spigen Tough Armor case.
I am a long term Spigen user and have yet to find a case from them that has disappointed, this one certainly keeps that reputation going!
For its price the quality is unbeatable, all the ports are cut accurately and generous enough to accept standard chargers and headphones. The buttons still have that awesome pixel tactile feeling as well. The only con I would give it is I wish the material of the initial layer would be a bit more rubbery to better absorb impacts, it feels closer to a hard plastic than a rubber.
With the two part construction and beefy corners protection is certainly up there with the best, keep in mind it is not minimalistic case and will add a decent amount of bulk, there are drawbacks to protection but I feel this case is a good medium ground between keeping the sleek look of the phone while maximizing durability.
ALSO; the kickstand is an awesome bonus that I never knew I can't live without. It stands the phone in the horizontal position at two different angles.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
T-frizzy said:
Hey just wanted to give my two cents on the Spigen Tough Armor case.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
Click to expand...
Click to collapse
Thanks. Here's the US link.
T-frizzy said:
Hey just wanted to give my two cents on the Spigen Tough Armor case.
I am a long term Spigen user and have yet to find a case from them that has disappointed, this one certainly keeps that reputation going!
For its price the quality is unbeatable, all the ports are cut accurately and generous enough to accept standard chargers and headphones. The buttons still have that awesome pixel tactile feeling as well. The only con I would give it is I wish the material of the initial layer would be a bit more rubbery to better absorb impacts, it feels closer to a hard plastic than a rubber.
With the two part construction and beefy corners protection is certainly up there with the best, keep in mind it is not minimalistic case and will add a decent amount of bulk, there are drawbacks to protection but I feel this case is a good medium ground between keeping the sleek look of the phone while maximizing durability.
ALSO; the kickstand is an awesome bonus that I never knew I can't live without. It stands the phone in the horizontal position at two different angles.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
Click to expand...
Click to collapse
Plus one. I had the tough armor for my v30. I was so happy with it I bought the pixel 3a xl version. I'm happy.
Since I got the purple-ish phone I wanted a clear case. The spigen liquid crystal is really nice. I normally hate cases, but I would rather be safe than sorry lately. So, using that and the LK branded screen protectors. Both work brilliantly together to offer great protection!
frozeninferno said:
Since I got the purple-ish phone I wanted a clear case. The spigen liquid crystal is really nice. I normally hate cases, but I would rather be safe than sorry lately. So, using that and the LK branded screen protectors. Both work brilliantly together to offer great protection!
Click to expand...
Click to collapse
I just received mine this weekend--crystal clear. I really like it. I normally just use a skin to give it grip but decided to try this one even though it took about 2 wks to arrive. My son got the "rugged" version and is very happy with it. On both (and maybe any case), we get a more accurate first-time fingerprint read . I really missed the back-reader when I went to MOTO Z3 P, so looked forward to this one. Being a little smaller, it doesn't seem to read as easily as the N5X or N6P, but these cases seem to put the finger where its needed.
The Spigen liquid crystal presents a nice fit--no gaps--esp around the headphone jack as other clear covers I'd tried in the past. It's easy to get on/off but still sturdy with a cushiony feel. I'm sure this isn't a case for "droppers." We still haven't settled on a screen protector.
ritchea said:
I just received mine this weekend--crystal clear. I really like it. I normally just use a skin to give it grip but decided to try this one even though it took about 2 wks to arrive. My son got the "rugged" version and is very happy with it. On both (and maybe any case), we get a more accurate first-time fingerprint read . I really missed the back-reader when I went to MOTO Z3 P, so looked forward to this one. Being a little smaller, it doesn't seem to read as easily as the N5X or N6P, but these cases seem to put the finger where its needed.
The Spigen liquid crystal presents a nice fit--no gaps--esp around the headphone jack as other clear covers I'd tried in the past. It's easy to get on/off but still sturdy with a cushiony feel. I'm sure this isn't a case for "droppers." We still haven't settled on a screen protector.
Click to expand...
Click to collapse
Oh trust me, you can drop your phone with this and it will be very well protected. I have used the "rugged" they call on the Pixel before and even that was plenty of cushion for quite a few drops on my S8+ (for the S8+, it was not called the rugged case). Don't be too worried, all of their cases are very protective and that is why I trust them. Wife and I both use Spigen, she always has iPhones and I have Androids and we have never had issues. Fitment is always amazing and protection is great as well.
If you can, get the LK screen protectors. Got mine from Amazon. They fit nicely and do not go too far out to the edges, "case safe." It was also pretty easy to install and it comes in a pack of 3.
Edit: if you ordered from either Spigen or Amazon, these cases had to be put in stock as this is a new phone. Normally it does not take long to receive items at all. I prefer ordering through Amazon because you get the Spigen items at a huge discount.
Have this case as well. I initially got a very cheap (less than 5 bucks) case while waiting for this to become available. I've stuck with Spigen ever since my Galaxy S5 and they never disappoint. These are always tough, sleek with a non-obnoxious design, and don't ruin the ability to easily get the phone in and out of your pocket.
This case is great! It's the one I am using.
I bought 3 cases for the P3aXL.
Spigen Tough Armor
Incipio
NiuBox Armor Slim Fit Dual Layer
Spigen was very good. Didn't like the feel of the buttons.
Incipio was a POS fingerprint magnet. Sucked
NiuBox is great!.I love the buttons and the textured feel of the case! It has chrome buttons that look really nice. They really stick out a lot and are so easy to use. The fingerprint reader is angled slightly down. I like it this way. Kept this case and returned the other 2.
Case currently not installed. Waiting on a sim card from Tello.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Got the sim card in. I love the way this case feels in my hand! Feels like there is no case on. Buttons are the best! Funny it has a 30 day warranty. We will see
Here updated pics with phone in case:
These are clickable images for high rez images:
;
This is what I purchased for mine.. Pixel 3a/ 3a XL | Spigen® [Rugged Armor] Matte Black Shockproof Slim Case Cover. I personally would have purchased a Tech21, I think they are great as well.. Had one for the Note4 back in the day. But Spigen will be my first ever from them.. So far nice easy to put on and fits like a glove.. The way a case should fit.
I get the wanting a case design that you're used to - in my case. it's the SUPCASE UNICORN BEETLE PRO. I have one for the Galaxy S7 Snapdragon (that my incoming 3a XL will replace); naturally, I'll be getting one for the 3a XL. In addition to being a tank of a case at a reasonable price (even on Amazon, it's under $20USD - and that includes the clip-on belt-loop holster) the only lack is a screen-protector (which - for me - is no lack). It also can hide a color choice that you got *stuck* with. (In the case of the S7, it is an ex-Verizon Bold Gold model - complete with the Verizon logo - rather ignominious since the phone itself has T-Mobile firmware in it; therefore I went with Basic (almost "Batman") Black then - I'm sticking with the same color choice for the 3a XL - which will actually match the phone's Just Black.) The S7 is the only cell phone I've ever owned that *wasn't* black (the first cell phone I ever owned was pre-Android - a black Samsung SCH prepaid I bought at Radio Shack; the first Android phone I ever owned was a passed-down Galaxy Nexus in black) - in other words, I don't buy black phones to buck trends - in my case, buying black phones IS the trend.
I just ordered this case. Looks like it has great rubber protection just like the case I had for a Nexus 6. Dropped that N6 a quite a few time times.
https://www.amazon.com/gp/product/B07T95NS28/
.
Dixon Butz said:
I just ordered this case. Looks like it has great rubber protection just like the case I had for a Nexus 6. Dropped that N6 a quite a few time times.
https://www.amazon.com/gp/product/B07T95NS28/
.
Click to expand...
Click to collapse
It is not soft rubber. I don't like that case. Hate the volume buttons. Did not put it on.
Still my favorite! :
https://forum.xda-developers.com/showpost.php?p=79808697&postcount=10
https://www.amazon.com/gp/product/B07SH8TKF9/
.
I grabbed one as well for my 3a XL, love this case. The only con I can think of is it's hard to find the volume buttons sometimes. The power button is textured which makes it easy to feel it.
I had an Axon 7 for the past 3 years, used nothing but the cheapest cases with a kick stand. This Spigen case feels a lot more premium and looks great.