Hey guys,
I know many are after a decent case for the Z3 and I have these 2 which I've covered in a review I posted up recently on Neowin: http://www.neowin.net/news/case-mate-barely-there-for-xperia-z3-review
Hopefully the info helps make up a decision for some of you!
Thank you for thevreview, I have just ordered one of these cases.
Appreciate the review!
Thanks for doing this review, I was kinda concerned if the case-mate barely there for the Xperia Z3 would be compatible with the official dock.
I'll be getting this case but the clear version, as I got the Xperia Z3 in mint silver on 02 and it looks so nice!
I want the clear version too just to be able to see the shiny rear glass
robbiekhan said:
Hey guys,
I know many are after a decent case for the Z3 and I have these 2 which I've covered in a review I posted up recently on Neowin
Hopefully the info helps make up a decision for some of you!
Click to expand...
Click to collapse
I noticed a commenter on the review mentioned how much he disliked cases without symmetry...I feel like I might be the same way, but I'm not sure and would really like a case that could work with the dock. So do you feel like it's not really a big deal? Still comfortable to hold on to? Should I just get over it and get the case? Haha
JBDX1319 said:
I noticed a commenter on the review mentioned how much he disliked cases without symmetry...I feel like I might be the same way, but I'm not sure and would really like a case that could work with the dock. So do you feel like it's not really a big deal? Still comfortable to hold on to? Should I just get over it and get the case? Haha
Click to expand...
Click to collapse
Aye I really don't think it's a big deal. It's slim enough and it's black so doesn't really stand out as a distraction.
I bought a charging dock, and the case, and they should both be here by Tuesday.
I received the Nillkin today and unfortunately the Magnector X charging cable does not fit. I managed to trim a little bit on the sides though and now it works! Good to know before you order
Ah that's good to know cheers!
robbiekhan said:
I want the clear version too just to be able to see the shiny rear glass
Click to expand...
Click to collapse
I know right + it feels so nice in the hand
I actually prefer without the case! Phone feels amazing metal and glass but a case just takes away that feel
I'll just be careful
I like to feel the glass back as well and didn't want to put a case. I am using a bumper to cover the sides to offer some grip
fatalus said:
I received the Nillkin today and unfortunately the Magnector X charging cable does not fit. I managed to trim a little bit on the sides though and now it works! Good to know before you order
Click to expand...
Click to collapse
Did you trim the magnetorx cable? If so where I have this case, and have the cable on the way.
Sent from my Xperia Z3
russell664 said:
Did you trim the magnetorx cable? If so where I have this case, and have the cable on the way.
Sent from my Xperia Z3
Click to expand...
Click to collapse
No, not the cable of course! I trimmed a little bit of the case where the lower part of the magnetic connector touches. You will see it when you receive both the case and the case.
Can anyone verify that the MagnectorX magnetic cable will fit alright with the Case Mate? I just ordered it up as it doesn't fit with my current case. It looks like it will be good to go, but just want to be sure.
It's all open side that end on the Barely There so yeah shouldn't be a problem.
The MagnectorX connector adapter will fit with the Case Mate Barely There, but it is not a completely secure connection. It will charge fine, but moving the phone while it is connected could dislodge it. The angle of the connector is very steep and leaves the cord very close to the case. On this thread http://forum.xda-developers.com/z3/accessories/magtrons-magnector-x202-cable-adapter-t2919541 it appears that the Magnector cable has more clearance. From those pics, it will fit with the case with trouble. The Barely There case works fine with the Z2 dock DK36, however. I purchased that dock since the price was lower than the dock for the Z3.
I also have a Sony XSP-N1BT receiver in my car (basically a dock which turns the phone into the face plate of the receiver and it has the magnetic pins to charge the Xperia phones) and with a little bit of fiddling, the phone will charge with the Barely There.
like the barely there case because of its slim design. but still would prefer a case that covers all the edge as well. maybe the casemate slim tough will be more suitable?
Since barely there is hard plastic, will it cause scratches to the phone eventually?
is The clear's finish is it the same as the black?
Related
Hey,
I was actually thinking about buying one of these. Is there anyone here, who uses one and can give me a short review about the pros and cons? I'm just looking for some case, which doesn't add too much bulkness, but still protects the phone.
Cheers
Sent from my X10i using XDA App
I'm also interested !
Here you can buy them cheap :
http://cgi.benl.ebay.be/HOT-Capdase...736349?pt=PDA_Accessories&hash=item20b4690a9d
I think it is hard to open the mini usb plastic ?
CoopZor said:
I'm also interested !
Here you can buy them cheap :
http://cgi.benl.ebay.be/HOT-Capdase...736349?pt=PDA_Accessories&hash=item20b4690a9d
I think it is hard to open the mini usb plastic ?
Click to expand...
Click to collapse
I use some silicone case atm, but it feels very bulky and not that safe. As of now, it isn't hard to access the usb-port, but I dunno bout the alumor case though.
I've been using a Capdase Alumor case since I got my X10 so I can't compare with anything else, but I think it's a great case.
It adds a bit of weight (as you'd expect from an all metal/rubber case) but I like that because it makes the phone feel more solid. Phone's been dropped from '8 year old daughter' height, and survived with no damage to the phone and only a slight scrape on the back of the case.
It's fairly easy to get the phone in and out of the case if you need to, but there's no real need. All of the X10's buttons are covered with rubber, but they all work fine. You have unrestricted access to the USB socket. Access to the 3.5 mm jack socket is very slightly restricted because the rubber has a bevel around the hole for some reason (strength I guess), but this is only an issue if you have a really thick plastic bit on your headphone jacks (my Sennheiser CX300s fit fine )
I was concerned about the rubber coming away from the metal on one part of the case, but it's not got any worse since I got it, so I guess it's ok. Rubber seems to be holding up well to regular 'in and out of pocket' use.
All in all, I'd recommend this case (and no I don't work for Capdase ). I got mine from Mobilefun in the UK and they're great (no, I don't work for them either!). They seem very cheap in that link above - watch out for fakes!!!
EDIT: Oh, and no problem opening the USB plastic cap (no harder than it is anyway, that is)
That thing looks pretty thick !!
I dont know if u like your phone looking and feeling thick, bc i got this clear plastic case and it makes the phone feel really chunky in my hand and not to mention the metal casing in the ebay picture looks thicker then my plastic case. but the case looks good tho just letting u know u might not like the feel.
LOL , It's almost an Otterbox clone HA HA HA HA
How do you know if its fake? I'm currently using one.
Sent from my X10i using XDA App
EphraimD said:
How do you know if its fake? I'm currently using one
Click to expand...
Click to collapse
No idea, but the cases in the link above are <$5 and the one I bought was ~£15.
Now, maybe I got screwed on price, but if they're that cheap it would make me suspicious.
At the end of the day, I guess it doesn't really matter as long as the case is good quality and protects the phone. If you get it for $5, then you're a winner
Allright I'll take a shot. We'll see where I buy it from, but still being aware of possible fakes I'll probably buy on Mobilefun. Well as for the bulk and phone feeling thick, I'll see that once it arrives, the weight doesn't matter to me as long as it's protected.
Review!
Give us a review of the case if u get it thnks!! i would like to find a better case since i really cant find many in local stores.
nvana said:
Give us a review of the case if u get it thnks!! i would like to find a better case since i really cant find many in local stores.
Click to expand...
Click to collapse
Will do.
Sent from my xperia using XDA App
CoopZor said:
I'm also interested !
Here you can buy them cheap :
http://cgi.benl.ebay.be/HOT-Capdase...736349?pt=PDA_Accessories&hash=item20b4690a9d
I think it is hard to open the mini usb plastic ?
Click to expand...
Click to collapse
I have one of them, they look really good. I use it for two months.. No Problems yet
Sent from my [email protected] using XDA App
Sorry to bring up a fairly old topic, but I figured its still better than to make a new one.
Can anyone post some pictures of this case fitting on their x10?
All the images on the internet were just sample images, I could not tell how it looks like in real.
I'm looking to buy a white one to put on my black X10, really would like to know how that would look, thanks
Alumor pictures
I have had this case since 12/2010. The one piece aluminium case wraps the sides & bottom & is completely lined with rubber extending to include the retaining rim. The case goes on & off very easily. The seal is very tight on the phone. I carry the phone on construction jobs with alot of dust, but no damage to the phone. All buttons press easily & 3.5 jack, USB , speaker, camera lens all have cutouts.
I have had to superglue some of the rubber along the edges once but not since & the case back is more slick than the phone back, making it tough to palm, but with pinky finger practice (supporting bottom of phone) is easily overcome. The metal case is very durable & takes drops well. The case does add bulk but is minimal for the metal protection & still goes in&out of pocket well. I still use the phone both with and without the case.
I paid $25.11 US including shipping from Hong kong to Ohio, USA.
Sent from my X10a using XDA App
Thanks for the review and photos, I am sure you are the first to post the photos of the product in so many angles. It's helpful to some of us.
Capdase is actually one of some reliable companies here in SEA.
I am using their flip-top leather case, thinking of getting alumor metal whenever I want to travel light.
i bought this case last friday in hk for HKD 98 (ie USD 12.6002)
it's a great case but i felt a bit bulky
so i remove the backcover of x10
and my phone is as slim as before!!!
this morning i received the case, is very beautiful.
cool! looking forward to get one!
I agree with prior post. Remove the back cover for a thinner phone. Case is still tight also.
Sent from my X10a using XDA App
i would like to see someone drop their x10 in that
http://youtu.be/Plg_bd-lcjY
For the price it's hard to beat. The Poetic cases are a minimum $20 so this is a bargain.
This tablet is fantastic, it's a real shame it isn't getting the type of publicity or recognition as ipads or nexus devices.
I have a Note 3, Nexus 1st gen, and Nexus FHD. The build quality on this Xperia is superb and tops compared to all those devices.
That was a really fast review. Should have mentioned if you can charge it with the case on.
Anyway. I bought one so I'll find it out soon.
perri.etb said:
That was a really fast review. Should have mentioned if you can charge it with the case on.
Anyway. I bought one so I'll find it out soon.
Click to expand...
Click to collapse
Yes, you can charge it, while in the case. I tend to keep everything short and to the point because there's plenty of 10 minutes and longer review videos on youtube.
Also, there are cut outs for the IR blaster in the plastic case. I tested it as my TV remote with the case on and it worked great.
Does the auto wake and sleep feature works your case?
Mine doesn't and there's another person on Amazon which has this problem too.
Am I missing something?
perri.etb said:
Does the auto wake and sleep feature works your case?
Mine doesn't and there's another person on Amazon which has this problem too.
Am I missing something?
Click to expand...
Click to collapse
Hi i got the jisoncase slim case, it looks exactly the same as the labato slim case. only thing different is the logo and the stitching... Anyway i was having issues of tablet not turning on when case is opened.. Try this hold the right side of the case down and lift the left corner, so you see the corner of the screen.... the screen when lifted it should turn on ? if not try Vice versa the screen should turn on ?
if it don't turn on, get a magnet remove the case and see if there is a magnet in the flip part of the case... And remember do NOT take the magnet near the tablet you will damage the display or other sensitive components of the tablet..
seoulbrova said:
http://youtu.be/Plg_bd-lcjY
For the price it's hard to beat. The Poetic cases are a minimum $20 so this is a bargain.
This tablet is fantastic, it's a real shame it isn't getting the type of publicity or recognition as ipads or nexus devices.
I have a Note 3, Nexus 1st gen, and Nexus FHD. The build quality on this Xperia is superb and tops compared to all those devices.
Click to expand...
Click to collapse
Any chance of a link to where you bought this case? Thanks mate!
bramgg said:
Any chance of a link to where you bought this case? Thanks mate!
Click to expand...
Click to collapse
http://www.amazon.com/Labato-Xperia...&qid=1388299504&sr=8-3&keywords=xperia+labato
I actually just received my Labato case yesterday and I really like it. It seems very well made especially for the price. My only issue is that the case doesnt stay closed with the magnet, so while moving the tablet around, the cover flaps open and keeps waking/sleeping the tablet. While that is my only complaint, its very annoying. If it had a strap or something to keep it closed, it would be the perfect case.
N1NJATH3ORY said:
Hi i got the jisoncase slim case, it looks exactly the same as the labato slim case. only thing different is the logo and the stitching... Anyway i was having issues of tablet not turning on when case is opened.. Try this hold the right side of the case down and lift the left corner, so you see the corner of the screen.... the screen when lifted it should turn on ? if not try Vice versa the screen should turn on ?
if it don't turn on, get a magnet remove the case and see if there is a magnet in the flip part of the case... And remember do NOT take the magnet near the tablet you will damage the display or other sensitive components of the tablet..
Click to expand...
Click to collapse
What I did is looking by the side to know if the screen turned off when I closed it.
What I've noticed is that the auto turning off doesn't work well but the turning on does almost the time.
Also I checked where the magnet is whith the cellphone and it's placed correctly (maybe it's not the most accurate tool but I couldn't feel it).
I concluded that the magnet might not be very strong so that's why it fails some times.
I must that the case is wonderful and price is pretty low. I've seen the case on Amazon and Ebay for those interested in it.
Thanks for help
pretty nice. any case for Sony Z2 tablet from them?
I just received my labato case yesterday.
Build quality is excellent and the magnet isn't powerful enough to mess with the display like my old case.
One negative however is that it doesn't stand very well, the base of the stand isn't really adequate I think, it falls backwards a lot especially on uneven surfaces.
I got one of those Labato cases ) Good quality and tablet wakes up like a charm )... Nice price! Recommend!
I just got this case and have the same problem with the smart cover not working 100% of the time. If I had known, I would have just paid less for the case without the smart cover. It's a great case otherwise though.
Update: After using the case for a week, the "smart" cover now works 0% of the time.
blackassassinuk said:
I just received my labato case yesterday.
Build quality is excellent and the magnet isn't powerful enough to mess with the display like my old case.
One negative however is that it doesn't stand very well, the base of the stand isn't really adequate I think, it falls backwards a lot especially on uneven surfaces.
Click to expand...
Click to collapse
I second this. And some times the flip doesn't close properly to turn off the screen. You also need to put a lil more effort to have the tablet stands stably.
planning to buy the red labato case, is it better than the black one since its $2 more expensive than the black one @ aliexpress ?
Or are both build wise and quality wise the same ?
nitin_ko said:
planning to buy the red labato case, is it better than the black one since its $2 more expensive than the black one @ aliexpress ?
Or are both build wise and quality wise the same ?
Click to expand...
Click to collapse
I have red one and the quality is very good. Only thing is sometimes have problems with screen off.
datas0ft said:
I have red one and the quality is very good. Only thing is sometimes have problems with screen off.
Click to expand...
Click to collapse
thanks.
labato @ aliexpress gave me additional 10% discount ($16.99) on the red one. I also bargained for a screen protector along with it. lets see how fast it reaches me.
http://www.aliexpress.com/snapshot/6072938066.html
Just got my ultra today. I also got 2 cases delivered. Both of these cases neither one of them has a cutout for the charging dock ports. i have the dock and obviously want to use a case that i can use on the dock.
can anyone recommend a hard or tpu type case that will meet my needs? no idea why these cases wouldn't have the proper cutouts
I've just bought an Incipio Watson case which also doesn't have a cut-out for the magnetic connector.
I plan to spend two minutes this evening with a craft knife fixing the problem!
Philip said:
I've just bought an Incipio Watson case which also doesn't have a cut-out for the magnetic connector.
I plan to spend two minutes this evening with a craft knife fixing the problem!
Click to expand...
Click to collapse
yeah, i was hoping it wouldn't come to that but i guess it may. it seems the only case i can find online with the proper holes ships from china.
can't get anything from amazon now with the proper holes shipped quickly, i bought what they had. sucks.
knives of ice said:
Just got my ultra today. I also got 2 cases delivered. Both of these cases neither one of them has a cutout for the charging dock ports. i have the dock and obviously want to use a case that i can use on the dock.
can anyone recommend a hard or tpu type case that will meet my needs? no idea why these cases wouldn't have the proper cutouts
Click to expand...
Click to collapse
I finally broke down and ordered one of these.
http://octilus.us/made-for-xperia-case-xperia-z-ultra-bimat-black.html
Have to order from overseas but it does have the dock/charger cutout.. I payed $21.11 shipped
kable said:
I finally broke down and ordered one of these.
http://octilus.us/made-for-xperia-case-xperia-z-ultra-bimat-black.html
Have to order from overseas but it does have the dock/charger cutout.. I payed $21.11 shipped
Click to expand...
Click to collapse
i ordered this, at least it sure looks to me like it has the correct cutouts based on the pics
http://www.amazon.com/gp/product/B00FGYT6WS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
You could try the Nillkin fresh series. I didn't really like the plastic back but what i like is the screen cover and that it has a cutout for the magnetic charging port.
Unfortunately, just because a case has the cutout, doesn't mean it works. this is the one I've got and while it fits in the DK30 dock (with the bigger inlay), the problem is that the dock has the phone sitting at an angle and I can't get the magnet to "grip".
I tried my best modding the thing to fit, didn't work out. So good luck with yours, please report back if you've been lucky enough to find something that works.
I also use the magnetic charging port for charging. I found the following TPU case. I purchased one in smoke, and liked it so much I then purchased another one in black. Works great. Highly recommended!
The item is: Black Matte TPU Silicone Gel Case Cover For Sony Xperia Z Ultra XL39h C6802 on eBay
Sold by mobilethink
(I'd list the direct link, but I am not allowed as someone who hasn't posted enough). I hope this helps.
just got my 4th case today. this is far and away the best i've gotten
http://www.ebay.com/itm/181400289992?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
has all the charging ports and the grip on the sides is awesome. i have the other cases recommended in this thread as well. i like this the best by far.
jb8von said:
I also use the magnetic charging port for charging. I found the following TPU case. I purchased one in smoke, and liked it so much I then purchased another one in black. Works great. Highly recommended!
The item is: Black Matte TPU Silicone Gel Case Cover For Sony Xperia Z Ultra XL39h C6802 on eBay
Sold by mobilethink
(I'd list the direct link, but I am not allowed as someone who hasn't posted enough). I hope this helps.
Click to expand...
Click to collapse
Thanks for the info on the case, I have the same case that I bought more by luck than judgement when I bought my Z ultra.
Please could you let us know if the case works with:
A.) The official magnetic dock
B.) A magnetic charging cable
C.) Both of the above
Cheers,
Rob
Rob, this case works with the charging cable. I'm not sure if it works with the charging dock as I don't own one. I hope this is (somewhat) helpful.
Good luck,
Josh
Thanks Josh, I'm going to order a cable for my shiny new toy
Cheers,
Rob
After dropping my beautiful phone and getting the corner peeled I decided to look for this exact combo; a case with a charging dock connection cut out that works with a magnetic cable. As you guys already know the charging port flap becomes pretty flimsy after a while and I did not want to risk it breaking.
After much trial and error I found a combination that works.
This cable:
http://www.aliexpress.com/item/Magn...agnetic-USB-cable-charger-for/1708094470.html
Works perfectly with this case:
http://www.ebay.com/itm/NILLKIN-Ult...Cell_Phone_PDA_Cases&var=&hash=item1e945842a2
The Nillkin case itself is pretty good but I'm also pretty sure that this cable will work with other cases that have a similar cutout. The magnetic connection from the cable is not that strong but gets the job done.
Thanks for post a working combo
R
knives of ice said:
just got my 4th case today. this is far and away the best i've gotten
http://www.ebay.com/itm/181400289992?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
has all the charging ports and the grip on the sides is awesome. i have the other cases recommended in this thread as well. i like this the best by far.
Click to expand...
Click to collapse
Looks better than the $2 ones. How much bend does this have? How soft vs rigid?
Hi there,
Would like to find out if anyone has tried and proven good covers/cases/bumpers that are dock-friendly?
Thought this would be a good place to start and share.
Thanks,
Chester
Case-Mate Barely There is dock friendly, just use the 45B plate for the dock will do.
AKK03 said:
Case-Mate Barely There is dock friendly, just use the 45B plate for the dock will do.
Click to expand...
Click to collapse
none of the docks work for me and I have a casemate barely there case.
im using the dock without any of the adapters.
Shudder123 said:
none of the docks work for me and I have a casemate barely there case.
im using the dock without any of the adapters.
Click to expand...
Click to collapse
Case-Mate Barely There works with the official dock DK48, just make sure you use the 45B plate.
AKK03 said:
Case-Mate Barely There works with the official dock DK48, just make sure you use the 45B plate.
Click to expand...
Click to collapse
i have it and can't fit in any of the plates. charging without the plates works though
no it doesn't....
AKK03 said:
Case-Mate Barely There works with the official dock DK48, just make sure you use the 45B plate.
Click to expand...
Click to collapse
I have the Case-Mate Barely There and I can confirm that IT DOES NOT fit with the official Sony magnetic dock using either 45A or 45B inserts. I haven't found a single case that does fit as yet... and charging without using an insert isn't ideal as the slightly knock causes the connection to be lost....
DrWig said:
I have the Case-Mate Barely There and I can confirm that IT DOES NOT fit with the official Sony magnetic dock using either 45A or 45B inserts. I haven't found a single case that does fit as yet... and charging without using an insert isn't ideal as the slightly knock causes the connection to be lost....
Click to expand...
Click to collapse
although, just to argue with myself, I've contacted Case-mate and they state that it should fit the magnetic dock. So either I'm being really thick, or my inserts for the DK48 aren't correct, or both......I'm going to recheck tonight!
cheers
DrWig
The DK36 works with the Case Mate Barely there and the wider of the two inserts included in the packaging. It was about $20 on Amazon. It charges pretty quickly as well.
DrWig said:
I have the Case-Mate Barely There and I can confirm that IT DOES NOT fit with the official Sony magnetic dock using either 45A or 45B inserts. I haven't found a single case that does fit as yet... and charging without using an insert isn't ideal as the slightly knock causes the connection to be lost....
Click to expand...
Click to collapse
It will fit with 45B insert, unless you have glass screen protector on. The glass will cause 45B to be not fit.
AKK03 said:
It will fit with 45B insert, unless you have glass screen protector on. The glass will cause 45B to be not fit.
Click to expand...
Click to collapse
This definitely isn't the case for mine - doesn't fit and I don't have a glass screen protector. However, I've found that it does fit with one of the inserts for the Z3 Compact - 35B, I think it's called - I'd always assumed this insert would be smaller so stupidly hadn't tried it, but perhaps the Z3 Compact is slightly fatter.
I'm not sure whether my case, or the dock is at fault here....
cheers
DrWig
I've done a short review of the Smart window style cover (dock friendly) in this thread.
http://forum.xda-developers.com/showthread.php?p=56541197
chesterchen said:
Hi there,
Would like to find out if anyone has tried and proven good covers/cases/bumpers that are dock-friendly?
Thought this would be a good place to start and share.
Chester
Click to expand...
Click to collapse
I know this isn't the answer to your question, exactly.. but... I went and looked at the dimensions of the Z3/Z2 and their respective docks and the extra thickness of the Z2 means its dock is just a tiny bit deeper... so I bought one and it accommodates a Z3 with a snap-on shell case *so* much better than the Z3 dock, even with the adapter. The TPU cases still don't fit without struggling to get it in and out though. The Z2 dock is also around half the price (or less).
No doubt Xperia Z3 is a beautiful design and most of the owners are inclined to show its curves, shape and color (specially the copper version) to others. I have been looking for many transparent cases around from different brands. In order to check their reviews, I looked at the reviews for xperia z2 cases by all of them.
My findings: Cheaper options available like yousave are not as transparent as they claim. The gel and silicon based cases are not at all transparent. Most of the transparent cases are susceptible to scratches. I have read good reviews about the tough naked case by CaseMate but the case does not protect the front. Then there is Spigen's case (which is not yet available yet) which has good reviews but the side bumper is made of TPU which is not totally transparent and looks a cheap look. The best reviews I found was for Ringke Fusion case however one really bad thing i have read about it is that if the phone falls, the sides of the case scratch the color off the phone. The case claims to have shock absorption but I fail to understand how they claim it.
If anyone among you have used any case before, please guide and recommend and review.
I was looking for a transparent slim case like this, but I can't find any for the Z3 only the Z3c.
http://www.ebay.com.au/itm/ULTRA-Sl...bilePhoneAccessories&var=&hash=item4187d2b0d6
I bought this one, still wanting for it to arrive here.
http://www.ebay.com/itm/Afan-Ultrat...t=US_Cell_Phone_PDA_Cases&hash=item27eb71f4e7
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
I ordered the Case-Mate Barely There case. It looks and feels OK, although protection is minimal as you'd expect. The cut out on the left is rather large as you can see, to allow the official dock to be used.
The case scratches rather easily. I marked the back by sliding my phone a few centimeters across the desk within an hour of using the case.
Overall, I wouldn't recommend it, due to how easily it scratches.
I'd be really interested to see if anyone handsome photos ofnthe Ringke Fusion case.
Sent from my SGP511 using XDA Free mobile app
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Yes I have also read that case mate barely there scratches easily. I have high hopes from ringke fusion. fingers crossed
heara said:
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Click to expand...
Click to collapse
Is the one from Brando that clear kinda sticky plastic "gel" material?
jhun80 said:
Anybody tried ringke?
cache=83468607623d9aec8d410b1e55df0e93&pi=SY200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1[/url]
Click to expand...
Click to collapse
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
joe198219 said:
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
Click to expand...
Click to collapse
Same. I'm hoping it'll fit the magnetic charger and my front and back tempered glass protectors...
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
se1000 said:
Is the one from Brando that clear kinda sticky plastic "gel" material?
Click to expand...
Click to collapse
well its more like a protector film very thin
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
erasat said:
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
Click to expand...
Click to collapse
The review left by the user wasn't too positive. I ordered this today on Amazon and cancelled it. :/
I finally got mine about 10 days ago, I really love it and to me it looks great, they thought of everything, it even fits the Dual Sim D6633, the left side flap fits perfectly on it, plus they thought of all the Magnetic chargers and even adapters out there so I kind of think that this is the most universal cover for our z3.
BUT, I left them a negative feedback on eBay simply because that's no way of working on the Customer service side, no responses to emails for weeks and after offering me a 15% discount if I kept the order active, I'm still waiting for them to rely to the email I sent dating yes and asking about how was I suppose to receive the credit.
EDIT: SOLD!!
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
danw_oz said:
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
Click to expand...
Click to collapse
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Rinke fusion case
android_fury said:
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Click to expand...
Click to collapse
True! When i got mine, i wondered why it's not as clear as I'd expected it. So i tried wiping it with my handkerchief to see if it's just some dirt or leftover adhesive from the protective film. To my shock, what i was wiping was a scratch already, and i made it even worse by rubbing it. Good thing i have the white z3 compact act so it's not too noticeable. But really disappointed with it's quality. I waited two months for this cause i live in the Philippines. Sigh. Rinke's Fusion case isn't as nice as it advertises.
UPDATE: apologies, there was a sticker on the rear panel. That's why it wasn't as clear and it easily "scratched". my phone looks okay now. Haha
You should take a look at http://aliexpress.com - it might takes 3-4 weeks to ship, but you will find literally a ton of transparent cases from 2$ (incl. shipping).
Got mine also from there - took 3.5 weeks.