Q&A for [ROM] RK3188 Tab V88 by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
the display orientation is wrong.
Click to expand...
Click to collapse
Download fix for Vido mini one zz from RK3188: V88 by Oma – KitKat 4.4.4 Edition (Sry this is my first post. I can't use links)
I have one problem. In Vido N80RK (rom: RK3188: V88 by Oma – KitKat 4.4.4 Edition ) WIFI not working. Why. I have Fix for Vido n80rk from Omnirom 4.4.4 and fix for Vido mini one zz.
Chuwi V88
You'll do android 5.0 on Chuwi V88 and if so, when. Thank you
Maybe chuwi itself provide 5.0 update
chuwi v88 quad
Hello. Can you tell me where I can install on my root Chuwi V88 quad? Thanks
Any chance of running the WiFi Chuwi 1st edition v88?
Hi oma.
in the woxter nimbus 98q does not work the wiffi and rotation in CM11, omnirom and lollipop. Can you help.
Thank you.
dmesg: https://mega.co.nz/#!fBA23TrK!VKQ9VEBYJP2ZZNunXSuv0nbyHUk5xRYXWcmbwuPsUT4
unknown clone RK3188 firmware selection
Please help me decide which firmware should I flash to clone that matches V88HD i guess.
The tablet has only two buttons, BACK and POWER. I already rooted and install CWM recovery following instruction in the head post.
CWM recovery is working great with gestures. I haven't seen that before.
Now I'm selecting ROM to FLASH for the first time on this device and a little nervous about it.
I need to change ROM, because of huge instability of WLAN. I hope it is ROM issue.
Tablet is sold in Bulgaria under with manufacturer AKKRON. Model is called qr10a16bt
Technical/Marketing SPECS
Touch Screen Size 9.7'' (4:3) Multi touch Retina panel
Density 320dpi
Resolution 2548 X 1536
Multi-touch support 10 finger multi-touch support
Casing Material Metal rear panel
Dimensions 242 x 189 x 9.9mm
Weight 0.64 Kgs
Chipset, CPU
chipset solution Rockchip 3188, cortex A9 Quad Core
processor speed 1.8 GHz
Memory
RAM 2 GB DDR3
NAND Flash 16 GB
Micro SD Card slot Support up to 32GB Micro SD
Camera
Front and Rear cameras 0.3 Mpix Front and 5.0 Mpix Rear
Interfaces
WIFI 802.11 b/g/n
Bluetooth Bluetooth v2.1
USB 1x USB
Micro SD card 1x Micro SD card slot (up to 32GB)
HDMI (Full HD) 1x HDMI, HD Video decoder support 1080p and 2160p
OTG Yes
supports external keyboard Yes
Earphone Out 1x Stereo Earphone Out
Audio output Speaker 1W
System
Operating system Android 4.2
Menu Language Bulgarian/English/Russian/German/Spanish/French ...
Support Flash player Flash 11
Support Office software Word, Excel, PDF, TXT ect.
Messenger MSN, Skype, Facebook, Twitter, Google talk, E-mail, ect.
E-Book Yes
Game support Yes
Video AVI, MKV, RM, RMVB, MPEG1/2/4, ect.
Audio MP3, WMA, AC3, WAV ect.
Audio / Video Recording Yes
3D by internal Hardware Yes
G Sensor Yes, 4 sides G-sensor
Power
power supply Aadaptor: 100v~240v, 50hz-60hz, 5V 1.5A
Battery 8000 mAh Rechargeable Lithium Polymer
Battery workimg time 8-16 Hours
Accessory
USB Cable for computer 1x
USB cable for USB disk 1x
User Manaul 1x
Adaptor 1x
Packaging
Box Dimensions (H?W?D)mm 302 x 200 x 76
Box Weight (Net/ Gross)
0.72 / 1.36 Kgs
this is device dmesg. Strangely it begins from 9.4 sec?
<6>[ 9.449500] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.449530] Bluetooth: RFCOMM ver 1.11
<6>[ 9.449552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.449585] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.449713] NET: Registered protocol family 35
<6>[ 9.449861] [BT_RFKILL]: Enter rfkill_rk_init
<6>[ 9.449959] [BT_RFKILL]: Failed to get bt_default_reset gpio.
<4>[ 9.449998] rfkill_rk: probe of rfkill_rk failed with error -1
<6>[ 9.696096] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<3>[ 9.696264] rk_cam_cif(3093):rk3066b-camera version: v0.3.9 Zoom by ipp
<5>[ 9.696293] Registering SWP/SWPB emulation handler
<6>[ 9.697534] ddrfreq: verion 2.4 20130427
<6>[ 9.697610] ddrfreq: normal 528MHz video 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 300MHz
<6>[ 9.699432] ddrfreq: change freq to 528 MHz when normal
<6>[ 9.700842] i2c i2c-0: sensor_probe: gs_mma8452,0xde60ca00
<4>[ 9.701212] sensor_chip_init:gs_mma8452:devid=0x2a,ops=0xc0e48dc8
<6>[ 9.703501] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-001d/input/input2
<4>[ 9.704043] sensor_irq_init:use irq=175
<4>[ 9.704341] sensor_misc_device_register:miscdevice: mma8452_daemon
<4>[ 9.704424] sensor_probe:initialized ok,sensor name:mma8452,type:1,id=14
<4>[ 9.704447]
<6>[ 9.704565] i2c i2c-0: sensor_probe: gs_lis3dh,0xde60cc00
<3>[ 9.704919] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 2...
<3>[ 9.705317] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 1...
<3>[ 9.705681] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 0...
<3>[ 9.706044] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 2...
<3>[ 9.706410] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 1...
<3>[ 9.706775] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 0...
<3>[ 9.707145] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 2...
<3>[ 9.707510] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 1...
<3>[ 9.707875] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 0...
<4>[ 9.707982] sensor_chip_init:fail to read gs_lis3dh devid:0xff
<3>[ 9.708058] i2c i2c-0: sensor_probe failed -11
<3>[ 9.708075]
<4>[ 9.708150] sensors: probe of 0-0019 failed with error -11
<6>[ 9.708331] sensor_init: Probe name sensors
<4>[ 9.708415] sensor-dev.c v1.3 add sensor debug support 2013-3-15
<6>[ 9.709575] rtc_hym8563 1-0051: setting system clock to 2014-11-20 13:40:30 UTC (1416490830)
<6>[ 9.714097] asoc: rk-hdmi-i2s-hifi <-> rk29_i2s.1 mapping ok
<6>[ 9.716488] Freeing init memory: 3240K
<4>[ 9.744345] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[ 9.937499] keychord: using input dev rk29-keypad for fevent
<3>[ 9.937689] init: cannot open '/initlogo.rle'
<4>[ 10.285675] min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
<4>[ 10.298449] gp_rknand_info = : 0xdd48d000
<4>[ 10.298516] rk30_chip_set:1
<4>[ 10.298565] request IRQ_NANDC irq , ret=0.........
<4>[ 10.298596] FTL INFO:Version = 438,Date = 20130620
<4>[ 10.298658] FlashCopyProgBuf1=0xc17ca000
<4>[ 10.298697] ATime: 40 ns AHB: 140 timming: 1081
<4>[ 10.298721] No.1 FLASH INFO:ad de 94 da 74
<4>[ 10.298746] No.3 FLASH INFO:ad de 94 da 74
<4>[ 10.299143] ATime: 32 ns AHB: 140 timming: 1061
<4>[ 10.299353] ATime: 32 ns AHB: 140 timming: 1061
<4>[ 10.299373] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00a9a8
<4>[ 10.402590] totalLogicBlkRaw = 3946
<4>[ 10.402617] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[ 10.402645] rknand_buffer.c version: 4.38 20121130!
<5>[ 10.402744] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[ 10.402773] Creating 10 MTD partitions on "rk29xxnand":
<5>[ 10.402803] 0x000000400000-0x000000800000 : "misc"
<5>[ 10.403530] 0x000000800000-0x000001800000 : "kernel"
<5>[ 10.404162] 0x000001800000-0x000002800000 : "boot"
<5>[ 10.404758] 0x000002800000-0x000004800000 : "recovery"
<5>[ 10.405422] 0x000004800000-0x000008800000 : "backup"
<5>[ 10.406091] 0x000008800000-0x000010800000 : "cache"
<5>[ 10.406792] 0x000010800000-0x000050800000 : "userdata"
<5>[ 10.407962] 0x000050800000-0x000050c00000 : "kpanic"
<6>[ 10.409439] apanic: Bound to mtd partition 'kpanic'
<6>[ 10.409462] apanic: No panic data available
<5>[ 10.409590] 0x000050c00000-0x000070c00000 : "system"
<5>[ 10.410501] 0x000070c00000-0x0003da800000 : "user"
<4>[ 10.418466] startBlk = 44 sysProtAddr = 43
<6>[ 10.523689] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[ 10.588011] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[ 10.701857] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>[ 10.875180] Probe ov5640_back_3 success
<3>[ 12.015221] camera 33-1-nt99340_back_4: Probe nt99340_back_4 failed
<3>[ 13.155202] camera 33-2-gc0328_front_5: Probe gc0328_front_5 failed
<4>[ 13.745940] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480
<4>[ 14.315213] Probe gc0308_front_6 success
<3>[ 14.905641] i2c i2c-3: 1 i2c clients have been registered at 0x3cmin_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200
<3>[ 14.946197] gc2035_front_7(rk_cam_sensor:677): error: mismatched pid = 0x0
<3>[ 14.946223]
<6>[ 15.265195] DWC_OTG: dwc_otg_hcd_enable, disable host controller
<3>[ 15.495228] camera 33-4-gc2035_front_7: Probe gc2035_front_7 failed
<4>[ 15.495588] UMP: Using dedicated memory backend
<4>[ 15.495653] UMP: Requesting dedicated memory: 0x86800000, size: 268435456
<4>[ 15.495852] UMP: UMP device driver loaded
<4>[ 15.528458] Mali: Mali400 inside of rk3188!
<4>[ 15.528491] Mali: mali freq table num : 6
<4>[ 15.528514] Mali: mali freq table :Mali: 128,Mali: 198,Mali: 256,Mali: 297,Mali: 384,Mali: 594,Mali:
<4>[ 15.528573] Mali: init mali clock success
<4>[ 15.534174] Mali: [MENTION=5839521 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION][/MENTION]@Mali device driver loaded success [MENTION=5839521 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION][/MENTION]@
<4>[ 15.539838] mirroring: Unknown symbol video_data_to_mirroring (err 0)
<4>[ 15.539895] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
<4>[ 15.542228] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 15.543039] ipp irq 47
<4>[ 15.543308] IPP init, version rk30-ipp 1.003
<3>[ 15.605465] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
<3>[ 15.706706] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[ 15.726673] init: cannot find '/system/bin/jellyservice', disabling 'jelly'
<3>[ 15.726750] init: cannot find '/system/bin/mtvmfservice', disabling 'mtvmf'
<3>[ 15.728971] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
<3>[ 15.734750] VPU_SERVICE: failed on clk_get pd_video
<4>[ 15.734794] vpu: power on
<6>[ 15.734843] VPU_SERVICE: checking hw id 4831
<4>[ 15.735579] vpu: power off...done
<6>[ 15.735616] VPU_SERVICE: init success
<3>[ 15.799970] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<3>[ 15.800037] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<3>[ 15.800332] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
<3>[ 16.046970] android_usb: already disabled
<3>[ 16.047154] android_usb: already disabled
<6>[ 16.055763] adb_open
<4>[ 16.193743] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[ 16.193790] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY
<4>[ 16.193831] [rknand_sys_storage_ioctl:365] return ret = 0
<6>[ 16.276041] .428.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
<6>[ 16.276077] .459.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
<4>[ 16.777532] rk fb use 3 buffers
<6>[ 16.813409] lcdc0 win1 open,atv layer:2
<6>[ 16.815193] lcdc0 win1 closed,atv layer:1
<6>[ 16.957703] rk30-lcdc rk30-lcdc.0: blank mode:0
<3>[ 17.092382] ov5640_back_3(rk_cam_sensor:1140): generic_sensor_ioctl cmd(0x3) is unknown !
<3>[ 17.092391]
<3>[ 17.092671] gc0308_front_6(rk_cam_sensor:1140): generic_sensor_ioctl cmd(0x3) is unknown !
<3>[ 17.092679]
<6>[ 23.095170] DWC_OTG: ********vbus detect*********************************************
<6>[ 23.321140] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 23.327139] DWC_OTG: USB SUSPEND
<6>[ 23.450279] DWC_OTG: USB RESET
<6>[ 23.538606] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 23.542829] DWC_OTG: USB RESET
<6>[ 23.659870] android_usb gadget: high speed config #1: android
<6>[ 23.660030] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 25.460147] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[ 40.576548] request_suspend_state: wakeup (3->0) at 40521400256 (2014-11-20 13:41:01.358672629 UTC)
<4>[ 41.125827] initRssiHistory.
<4>[ 41.125861] =======================================================
<4>[ 41.125911] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 41.125949] =======================================================
<4>[ 41.125989] MT5931 SDIO WiFi driver (Powered by Rockchip,Ver 3.12) init.
<4>[ 41.126029] ## Calling platform_driver_register
<4>[ 41.126121] ## wifi_probe
<4>[ 41.126245] wifi_set_power = 1
<6>[ 41.126270] rk29sdk_wifi_power: 1
<6>[ 41.239065] acc_open
<6>[ 41.239113] acc_release
<6>[ 41.423877] wifi turn on power
<4>[ 41.475210] wifi_set_carddetect = 1
<6>[ 41.475242] rk29sdk_wifi_set_carddetect:1
<6>[ 41.475291] mmc1: slot status change detected(0-1)
<4>[ 41.475828] wl_android_wifictrl_func_add success.
<6>[ 41.675227]
<6>[ 41.675234] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
<6>[ 41.719148]
<6>[ 41.719157] mmc_attach_sdio..808.. ===== Begin to identify card as SDIO-card. [mmc1]
<6>[ 41.749674] rk29_sdmmc_change_clk_div..1961.. newDiv=0, newCLK=24000Khz [sdio]
<6>[ 41.752956] mmc1: new high speed SDIO card at address 0001
<6>[ 43.497995] mmc_rescan_try_freq..1675.. ===== Initialize SDIO successfully. [mmc1]
<4>[ 43.588606] Current WiFi chip is MT5931.
<4>[ 43.588759] p2p Launch
<4>[ 43.588781] glRegisterP2P
<4>[ 43.589077] Launch success, fgIsP2PRegistered TRUE.
<6>[ 45.785453] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 46.563847] initRssiHistory.
<6>[ 46.573200] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 49.511009] --> mtk_cfg80211_testmode_cmd()
<4>[ 49.515282] --> mtk_cfg80211_testmode_sw_cmd()
<4>[ 49.519261] --> mtk_cfg80211_testmode_cmd()
<4>[ 49.519295] --> mtk_cfg80211_testmode_sw_cmd()
<4>[ 49.519530] --> mtk_cfg80211_testmode_cmd()
<4>[ 49.519560] --> mtk_cfg80211_testmode_sw_cmd()
<4>[ 49.519835] --> mtk_cfg80211_testmode_cmd()
<4>[ 49.519880] --> mtk_cfg80211_testmode_sw_cmd()
<4>[ 49.520126] --> mtk_cfg80211_testmode_cmd()
<4>[ 49.520155] --> mtk_cfg80211_testmode_sw_cmd()
<4>[ 49.520365] --> mtk_cfg80211_testmode_cmd()
<4>[ 49.520418] --> mtk_cfg80211_testmode_sw_cmd()
<7>[ 56.955207] p2p0: no IPv6 routers present
<7>[ 57.335174] wlan0: no IPv6 routers present
<3>[ 64.074180] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>[ 74.725928] rk30-lcdc rk30-lcdc.0: blank mode:4
<6>[ 74.726411] request_suspend_state: sleep (0->3) at 74671267635 (2014-11-20
13:41:35.508540758 UTC)
<6>[ 74.726823] *********wlanP2P_early_suspend************
<6>[ 74.726865] *********p2pEarlySuspend************
<6>[ 74.726907] ip is not avaliable.
<4>[ 74.774951] rk3188 lcdc0 clk disable...
<6>[ 74.875759] ddrfreq: change auto self refresh to 1 when suspend
<6>[ 74.877214] ddrfreq: change freq to 198 MHz when suspend
<6>[ 86.091258] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<6>[ 86.109331] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<6>[ 86.122414] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<6>[ 86.246748] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<6>[ 86.278212] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<6>[ 86.293196] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<6>[ 138.888253] binder: 996:1005 refcount change on invalid ref 20
<6>[ 141.867881] binder: 996:1976 refcount change on invalid ref 20
<6>[ 141.867999] binder: 996:1976 refcount change on invalid ref 20
<3>[ 141.868081] binder: transaction release 39126 bad handle 20
<6>[ 142.600188] binder: 996:1005 refcount change on invalid ref 34
<6>[ 142.660651] binder: 996:1976 refcount change on invalid ref 34
<6>[ 142.660727] binder: 996:1976 refcount change on invalid ref 34
<3>[ 142.660815] binder: transaction release 41115 bad handle 34
<6>[ 143.318846] binder: 996:1005 refcount change on invalid ref 49
<6>[ 143.392551] binder: 996:1976 refcount change on invalid ref 49
<6>[ 143.392621] binder: 996:1976 refcount change on invalid ref 49
<3>[ 143.392706] binder: transaction release 41474 bad handle 49
<6>[ 148.157154] binder: 996:1005 refcount change on invalid ref 52
<6>[ 148.168317] binder: 996:1976 refcount change on invalid ref 52
<6>[ 148.168420] binder: 996:1976 refcount change on invalid ref 52
<3>[ 148.168512] binder: transaction release 41590 bad handle 52
<6>[ 148.643682] binder: 996:1005 refcount change on invalid ref 56
<6>[ 148.723361] binder: 996:1976 refcount change on invalid ref 56
<6>[ 148.723432] binder: 996:1976 refcount change on invalid ref 56
<3>[ 148.723539] binder: transaction release 41842 bad handle 56
<6>[ 149.471020] binder: 996:1005 refcount change on invalid ref 61
<6>[ 149.549887] binder: 996:1976 refcount change on invalid ref 61
<6>[ 149.549954] binder: 996:1976 refcount change on invalid ref 61
<3>[ 149.550049] binder: transaction release 41985 bad handle 61
<6>[ 150.021855] binder: 996:1005 refcount change on invalid ref 71
<6>[ 150.168615] binder: 996:1976 refcount change on invalid ref 71
<6>[ 150.168698] binder: 996:1976 refcount change on invalid ref 71
<3>[ 150.168798] binder: transaction release 42218 bad handle 71
<6>[ 150.702339] binder: 996:1005 refcount change on invalid ref 19
<6>[ 150.860922] binder: 996:1976 refcount change on invalid ref 19
<6>[ 150.860997] binder: 996:1976 refcount change on invalid ref 19
<3>[ 150.861079] binder: transaction release 42458 bad handle 19
<6>[ 150.988430] binder: 996:1005 refcount change on invalid ref 25
<6>[ 151.085705] binder: 996:1976 refcount change on invalid ref 25
<6>[ 151.085796] binder: 996:1976 refcount change on invalid ref 25
<3>[ 151.085880] binder: transaction release 42645 bad handle 25
<6>[ 151.270773] binder: 996:1005 refcount change on invalid ref 32
<6>[ 151.292002] binder: 996:1976 refcount change on invalid ref 32
<6>[ 151.292104] binder: 996:1976 refcount change on invalid ref 32
<3>[ 151.292193] binder: transaction release 42764 bad handle 32
<6>[ 152.081414] binder: 996:1005 refcount change on invalid ref 48
<6>[ 152.085394] binder: 996:1976 refcount change on invalid ref 48
<6>[ 152.085454] binder: 996:1976 refcount change on invalid ref 48
<3>[ 152.085525] binder: transaction release 43122 bad handle 48
<6>[ 152.595570] binder: 996:1005 refcount change on invalid ref 51
<6>[ 152.689596] binder: 996:1976 refcount change on invalid ref 51
<6>[ 152.689679] binder: 996:1976 refcount change on invalid ref 51
<3>[ 152.689782] binder: transaction release 43373 bad handle 51
<6>[ 152.885724] binder: 996:1005 refcount change on invalid ref 61
<6>[ 152.972118] binder: 996:1976 refcount change on invalid ref 61
<6>[ 152.972187] binder: 996:1976 refcount change on invalid ref 61
<3>[ 152.972272] binder: transaction release 43514 bad handle 61
<6>[ 153.152154] binder: 996:1005 refcount change on invalid ref 66
<6>[ 153.159417] binder: 996:1976 refcount change on invalid ref 66
<6>[ 153.160579] binder: 996:1976 refcount change on invalid ref 66
<3>[ 153.160644] binder: transaction release 43630 bad handle 66
<4>[ 161.744214] standby rt5631
[email protected]:/ #
screenshot of About tab
I'm attaching screenshot of About tab
full dmesg
Last dmesg was cut from cmd.exe history buffer.
Here is full the dmesg
current best Rom
I just bought a xtreme x81 tab, and i would like to know what is the current best ROM.
I have installed the kitkat v2.4, and Antutu scores are lower than stock, and system sometimes freezes.
Many thanks in advance.
Hi oma.
in the woxter nimbus 98q does not work the wiffi and rotation in CM11, omnirom and lollipop. Can you help.
Thank you.
dmesg: https://mega.co.nz/#!fBA23TrK!VKQ9VEBYJP2ZZNunXSuv0nbyHUk5xRYXWcmbwuP sUT4
Request Rom for Qilive 9.7r
Goodmorning.
I am searching for a working Rom, stable as possible, for my Qilive 9.7r. 6 months ago you suggested this rom:
IRON by CrewRKTablets KK 4.4.2 v1.1 (from your website)
Can i use it or there is something new that can i use??
Thx a lots for your work!!!
chuwi v88s rom
hi,
im new in this procedure. I have bought the chuwi v88s tablet and it seems to stuck a lot. it really does.
I want to try a new rom and i want to ask if the procure u give in the video is still ok or have any updated ones i should follow.
Thanx a lot for your time
Rockchip Developers Please Help ME
I Have a Rockchip Tablet PCB V8_RK618_MV3.0_20130910
it named Gamma GA-TAB MINI
Screen : 7.9 inch
Internal : 16 GB
RAM : 2GB
Proccessor Type : RK3188-T
Processor Freq. : 1.6 Ghz Quad-Core
Touch IC : CT362
other info in the pics
the official site have no firmware download links.
i need a stock or custom firmware please i missed and flashed a boot.img with the recovery.img so the tablet now black screened
i have tried about 3 firmwares with no luck
Can Any One Help Me Please?
.:::Thanks:::.
Odys Ieos Quad
BT and Wifi still broken for the Ieos Quad?
Any way to fix that?
Does anyone know if Oma rom works for other Rockchip 3188 devices besides Chuwi v88? I have a fnf iFive x2 tablet with the same Rockchip chipset and quad core and want to install the "multi window edition" on it. If so, which version should I use? Thank you in advance for any help here!
bogarty said:
Does anyone know if Oma rom works for other Rockchip 3188 devices besides Chuwi v88? I have a fnf iFive x2 tablet with the same Rockchip chipset and quad core and want to install the "multi window edition" on it. If so, which version should I use? Thank you in advance for any help here!
Click to expand...
Click to collapse
It happened to me too. You forgot to choose your tablet kernel instead oma's kernel. Download it from kernel archive and try again. @Oma7144 I installed your OmniRom 1.4.1 in my pipo s1pro and it works very well, but i have some problems.
Rotation is not working, is there any fix?
HDMI is working only when i touch the screen and not at 1080p. If i play a movie i get a green screen.
Camera is rotated 90 degrees, but working.
I hope you can help me. Do you need a log? Thanks a lot.
djkail said:
It happened to me too. You forgot to choose your tablet kernel instead oma's kernel. Download it from kernel archive and try again. @Oma7144 I installed your OmniRom 1.4.1 in my pipo s1pro and it works very well, but i have some problems.
Rotation is not working, is there any fix?
HDMI is working only when i touch the screen and not at 1080p. If i play a movie i get a green screen.
Camera is rotated 90 degrees, but working.
I hope you can help me. Do you need a log? Thanks a lot.
Click to expand...
Click to collapse
I tried this fix for my S1Pro, and it worked a bit.
"CrewRKTablets KK Omni V1.4.1 Model Fix Pipo S3pro"
http://crewrktablets.arctablet.com/?wpfb_dl=2263
HDMI is now working perfectly!!
Rotation started to work, but its 90º turned to the right
Frontal camera is ok, but rear camera is 180º rotated
USB OTG is working too.
I hope you can help me. Thanks a lot.
Oma roms on Pipo M9 Max with 1x16Gb Nand flash
Can I use Oma rom on my Modecom freetab 1014 ips x4+ (PIPO M9 Max) ?
These roms are for Chuwi V88 with 2x 8Gb Nand chips. My tablet has only one chip. 1x16Gb (29f128g08cfaba)
Related
Hey there, please someone run a tcpdump while the OTA update on the mini and send me the log. Because now my phone is still sending, but maybe i'm able to work on further till the phone arrives
Thanks
Bin4ry
X10 mini PRO comes out of the store with the latest firmware 1.1.А.0.8.
and can't be udated Over-the-air :-(
But X10 mini (may be) comes with 1.0.А.1.036
Any idea how to force update Over-the-air, if firmware already latest?
May be tcpdump of update over PcCompanion can help?
yep i know, but i we can crossflash X10 mini firmware to X10 mini pro (keyboard will not work). But now i'm searching for a x10 mini user who is making a tcpdump until i get the device to do it on my own
The faster someone helps the faster you get root
Regards
EDIT:
No way to force the update :/
SE is always using ssl-sha1 crypting in their communication with fota servers. We already tryed to guess the right chat but no luck. For now we can only dump the mainpath to fota.package and then we know it for all firmwares
PC-Comp. won't help, cause i'm working on dmclient. I think i have found the key to root a few hours ago. Now we need fota and firmware dump to roll back to the rom where fota updates from
Ок.
I already found the way to revert my firmware to previous 1.0.A.1.36 firmware.
1.1.А.0.8 -> 1.0.A.1.36 = completed
But now it's UK firmware and loose my Russian Warranty
But OTA update not available im my region :'(
OTA over WLAN is always available, because it only knows firmware version.
Hmm if not it weird.
So you are now on UK firmware?
Try to go into OTA Settings -> Networks -> WLAN Only
Then search again, if you got it:
tcpdump -D
-> you will get interfaces
tcpdump -w dump.log -I *INTERFACENUMBER*
Thanks
Bin4ry
NO!
I think it looks at SIM card, operator or IMEI.
OTA update not available :-(
Yes it now UK firmware – Google Voice works perfectly (it can't works in my country).
Phone Software version:
1235-3408_1.0.A.1.36
GENERIC - user
File System Version:
WORLD-1-8_1.0.A.1.36
S1 Boot version
1229-3593 R8A026
ETS Software version
1234-7269_1S_18
Customization version
1237-0392_R6A
Memory card
1236-3496_R9A
Content version
PA12
Type Number
AAD-3880069-BV
Click to expand...
Click to collapse
Way to revert:
Use debranding procedure.
And quick copy 2 files between SEUS download firmware from SE and load it to phone.
UPD: But SEUS says now that Update available!
UPD2: OTA can't find network without SIM installed!
hmmm, okay thanks for trying. Then we have to find somebody who is willing to do and for whom OTA is available :/
But many thanks for trying
Regards
Bin4ry
How to do that
Hi, I guess I may do what you ask for. I've tried udpated the phone using OTA. It told me I already have the latest software installed, so it OTA should be available by my guess.
What is the exact way to get the dump. I have no idea where tu put the commands in. I've left Win Mobile a few days ago (after 6 years) and I'm very new to Android
Regards,
Radek
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
If you got this message there is not OTA for you :/
Some people here claimed that there is OTA, thats because it requested someone of them to capture it with tcpdump.
Regards
Bin4ry
Darkbidule said:
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
Click to expand...
Click to collapse
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
I created a new thread to request this informations .... Maybe this time the right users answer
Regards
Bin4ry
MarylandCookie said:
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
Click to expand...
Click to collapse
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
May be this will help: device booting log
<5>[ 0.000000] Linux version 2.6.29 ([email protected]) (gcc version 4.2.1)
#1 PREEMPT Sun Apr 25 11:26:30 2010
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: QCT MSM7x27 SURF
<6>[ 0.000000] Partition (from atag) system -- Offset:160 Size:670
<6>[ 0.000000] Partition (from atag) cache -- Offset:7d0 Size:190
<6>[ 0.000000] Partition (from atag) appslog -- Offset:ffe Size:2
<6>[ 0.000000] Partition (from atag) userdata -- Offset:960 Size:69e
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 55296
<7>[ 0.000000] free_area_init_node: node 0, pgdat 804de1c8, node_mem_map 805fb000
<7>[ 0.000000] Normal zone: 432 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 54864 pages, LIFO batch:15
<6>[ 0.000000] allocating 524288 bytes at 80800000 (a00000 physical) for kernel ebi1 pmem arena
<6>[ 0.000000] allocating 15159296 bytes at 80eac000 (10ac000 physical) for mdp pmem arena
<6>[ 0.000000] allocating 8880128 bytes at 81d21000 (1f21000 physical) for adsp pmem arena
<6>[ 0.000000] allocating 16777216 bytes at 82599000 (2799000 physical) for gpu1 pmem arena
<6>[ 0.000000] allocating 1048576 bytes at 83599000 (3799000 physical) for fb
<6>[ 0.000000] allocating 2097152 bytes at 83700000 (3900000 physical) for KGSL
<6>[ 0.000000] L210 cache controller enabled
<4>[ 0.000000]
<4>[ 0.000000] [KDUMP] Successfully reserved Crashk Memory
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54864
<5>[ 0.000000] Kernel command line: mem=216M androidboot.hardware=delta
msm_hsusb.pid=0x3137 console=ttyMSM2 serialno=xxxxx console=ttyMSM0 startup=0x00000001
<3>[ 0.000000] Unknown boot option `androidboot.hardware=delta': ignoring
<6>[ 0.000000] USB serial number: xxxxx
<7>[ 0.000000] startup_reason_setup: 0x1
<4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000280] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000920] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.016915] Memory: 216MB = 216MB total
<5>[ 0.016948] Memory: 168704KB available (4628K code, 1296K data, 140K init)
<6>[ 0.017291] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<4>[ 0.230310] Mount-cache hash table entries: 512
<6>[ 0.230871] CPU: Testing write buffer coherency: ok
<6>[ 0.233743] net_namespace: 296 bytes
<6>[ 0.234665] NET: Registered protocol family 16
<6>[ 0.236738] socinfo_init: v3, id=43, ver=0.0, raw_id=0, raw_ver=0, hw_plat=0
<6>[ 0.236760] acpu_clock_init()
<6>[ 0.236925] L val: PLL0: 50, PLL1: 12, PLL2: 62
<6>[ 0.237055] ACPU running at 600000 KHz
<6>[ 0.237071] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[ 0.237098] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
<6>[ 0.237123] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
<6>[ 0.237150] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
<6>[ 0.237175] 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
<6>[ 0.237200] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
<6>[ 0.237225] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
<6>[ 0.237250] 6 400000 2 3 133333 3 160000 5 4 3 7 -1 8
<6>[ 0.237276] 7 480000 0 2 160000 3 160000 5 4 6 -1 -1 8
<6>[ 0.237301] 8 600000 2 2 200000 3 200000 7 -1 6 -1 -1 -1
<6>[ 0.237320] Shared PLL control available.
<6>[ 0.237333] 5 scaling frequencies supported.
<7>[ 0.274038] msm_mddi_hitachi_display_device_init
<7>[ 0.274426] msm_mddi_samsung_display_device_init
<7>[ 0.274635] msm_mddi_toshiba_display_device_init
<6>[ 0.275236] console [oops-1] enabled
<4>[ 0.291785] bio: create slab <bio-0> at 0
<6>[ 0.293121] msm_i2c_probe
<6>[ 0.293233] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.296706] Bluetooth: Core ver 2.15
<6>[ 0.297058] NET: Registered protocol family 31
<6>[ 0.297075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.297096] Bluetooth: HCI socket layer initialized
<6>[ 0.299913] NET: Registered protocol family 2
<6>[ 0.300103] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<7>[ 0.300196] Switched to high resolution mode on CPU 0
<6>[ 0.300596] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.300911] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.301081] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.301100] TCP reno registered
<6>[ 0.301290] NET: Registered protocol family 1
<6>[ 0.301893] checking if image is initramfs... it is
<6>[ 0.593413] Freeing initrd memory: 684K
<6>[ 0.595695] smd probe
<6>[ 0.595718] smd_core_init()
<6>[ 0.595801] smd_core_init() done
<6>[ 0.596068] smd_alloc_channel: cid 0 fifo found; size = 8192
<6>[ 0.596091] smd_alloc_channel() 'DS' cid=0
<6>[ 0.597035] smd_alloc_channel: cid 1 fifo found; size = 8192
<6>[ 0.597060] smd_alloc_channel() 'DIAG' cid=1
<6>[ 0.597440] smd_alloc_channel: cid 2 fifo found; size = 8192
<6>[ 0.597465] smd_alloc_channel() 'RPCCALL' cid=2
<6>[ 0.597868] smd_alloc_channel: cid 7 fifo found; size = 32768
<6>[ 0.597891] smd_alloc_channel() 'DATA1' cid=7
<6>[ 0.598321] smd_alloc_channel: cid 8 fifo found; size = 8192
<6>[ 0.598343] smd_alloc_channel() 'DATA2' cid=8
<6>[ 0.598766] smd_alloc_channel: cid 9 fifo found; size = 8192
<6>[ 0.598788] smd_alloc_channel() 'DATA3' cid=9
<6>[ 0.599191] smd_alloc_channel: cid 10 fifo found; size = 8192
<6>[ 0.599215] smd_alloc_channel() 'DATA4' cid=10
<6>[ 0.599628] smd_alloc_channel: cid 11 fifo found; size = 32768
<6>[ 0.599651] smd_alloc_channel() 'DATA5' cid=11
<6>[ 0.600021] smd_alloc_channel: cid 12 fifo found; size = 32768
<6>[ 0.600045] smd_alloc_channel() 'DATA6' cid=12
<6>[ 0.600485] smd_alloc_channel: cid 13 fifo found; size = 32768
<6>[ 0.600506] smd_alloc_channel() 'DATA7' cid=13
<6>[ 0.600940] smd_alloc_channel: cid 17 fifo found; size = 8192
<6>[ 0.600963] smd_alloc_channel() 'DATA11' cid=17
<3>[ 0.601380] smd_alloc_channel: cid 38 does not exist
<6>[ 0.601401] smd_alloc_channel: cid 39 fifo found; size = 8192
<6>[ 0.601421] smd_alloc_channel() 'DAL00' cid=39
<6>[ 0.601813] smd_alloc_channel: cid 40 fifo found; size = 8192
<6>[ 0.601835] smd_alloc_channel() 'DATA5_CNTL' cid=40
<6>[ 0.602243] smd_alloc_channel: cid 41 fifo found; size = 8192
<6>[ 0.602265] smd_alloc_channel() 'DATA6_CNTL' cid=41
<6>[ 0.602646] smd_alloc_channel: cid 42 fifo found; size = 8192
<6>[ 0.602670] smd_alloc_channel() 'DATA7_CNTL' cid=42
<6>[ 0.603630] SMD Control Port Driver Initialized.
<6>[ 0.604486] SMD: ch 2 CLOSED -> OPENING
<6>[ 0.604610] SMD: ch 2 OPENING -> OPENED
<3>[ 0.605335] Using very old AMSS modem firmware.
<3>[ 0.605383] Using very old AMSS modem firmware.
<6>[ 0.605916] [adsp:adsp.c:adsp_init] rs3000000a:00010000 -- 0
<6>[ 0.609846] [msm-audio:audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.609876] [msm-audio:audpp.c:audpp_probe] Number of concurrency supported 7
<6>[ 0.609903] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.609921] [msm-audio:audpp.c:audpp_probe] queueid:13
<6>[ 0.609936] [msm-audio:audpp.c:audpp_probe] decid:0
<6>[ 0.609953] [msm-audio:audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.609970] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.609991] [msm-audio:audpp.c:audpp_probe] queueid:14
<6>[ 0.610006] [msm-audio:audpp.c:audpp_probe] decid:1
<6>[ 0.610021] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610038] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.610055] [msm-audio:audpp.c:audpp_probe] queueid:15
<6>[ 0.610071] [msm-audio:audpp.c:audpp_probe] decid:2
<6>[ 0.610086] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610106] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.610125] [msm-audio:audpp.c:audpp_probe] queueid:16
<6>[ 0.610140] [msm-audio:audpp.c:audpp_probe] decid:3
<6>[ 0.611198] [msm-audio:audpp.c:audpp_probe] nr_codec_support:4
<6>[ 0.611218] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.611241] [msm-audio:audpp.c:audpp_probe] queueid:17
<6>[ 0.611256] [msm-audio:audpp.c:audpp_probe] decid:4
<6>[ 0.611271] [msm-audio:audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.627273] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.627285] tick = 161731
<6>[ 0.627290] stamp = 18371725
<4>[ 0.627323] /home/hudsonslave/root/workspace/offbuild_param_deckard1_0_release_caf_matrix/
HUDSON_PRODUCT/robyn/HUDSON_VARIANT/user/label/
BUILDNODE/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.628021] proximity-sensor: proximity_probe called.
<6>[ 0.628586] Registered semc device: proximity-sensor
<6>[ 0.628605] proximity-sensor: driver installation succeeded
<6>[ 0.641741] ashmem: initialized
<6>[ 0.643300] fuse init (API version 7.11)
<4>[ 0.643923] yaffs May 12 2010 22:12:25 Installing.
<6>[ 0.643985] msgmni has been set to 331
<6>[ 0.644051] io scheduler noop registered
<6>[ 0.644066] io scheduler anticipatory registered (default)
<6>[ 0.644856] msm_fb_probe: phy_Addr = 0x3799000 virt = 0x8e200000
<6>[ 0.646640] MDP HW Base phy_Address = 0xaa200000 virt = 0x8e100000
<6>[ 0.647323] primary mddi base phy_addr = 0xaa600000 virt = 0x8e00c000
<6>[ 0.659028] MDDI: Hitachi: Found display with cell ID = 0xfd, module ID = 0x2,
revision ID = 0x20, driver ID = 0x13
<6>[ 0.662831] FrameBuffer[0] 240x320 size=307200 bytes is registered successfully!
<6>[ 0.663513] Registered led device: lcd-backlight
<6>[ 0.684138] diagfwd initializing ..
<6>[ 0.684456] SMD: ch 1 CLOSED -> OPENING
<6>[ 0.684475] diag opened SMD port; r = 0
<6>[ 0.684560] SMD: ch 1 OPENING -> OPENED
<6>[ 0.684825] diagchar initializing ..
<6>[ 0.685311] diagchar initialized
<6>[ 0.685545] [drm] Initialized drm 1.1.0 20060810
<6>[ 0.685633] msm_serial: detected port #2
<6>[ 0.685736] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>[ 0.685855] msm_serial: console setup on port #2
<6>[ 0.685880] console [ttyMSM2] enabled
<6>[ 1.533379] msm_serial: driver initialized
<6>[ 1.535949] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 1.544018] msm_serial_hs module loaded
<6>[ 1.551528] brd: module loaded
<6>[ 1.555713] loop: module loaded
<6>[ 1.556083] pmem: 1 init
<6>[ 1.557169] pmem_adsp: 0 init
<6>[ 1.559469] pmem_gpu1: 0 init
<3>[ 1.563249] pmic-lightsensor: registered.
<6>[ 1.566681] SEMC_Systemconnector: Successfully initialized.
<6>[ 1.573843] Registered semc device: vibrator
<6>[ 1.575488] msm_pmic_vibrator version 0.1 loaded
<6>[ 1.580086] semc_power: Loading...
<6>[ 1.583503] bq24180: Setting up HW
<6>[ 1.586909] bq24180: Probing
<6>[ 1.589724] bq24180: Starting watchdog reset
<6>[ 1.594721] bq24180: BQ24180 not initialized by boot SW
<6>[ 1.599184] bq24180: Stopping watchdog reset
<6>[ 1.603738] bq24180: Found HW BQ24180 revision 0x01.
<6>[ 1.609509] bq24180: Set init values
<6>[ 1.611966] bq24180: Setting charger voltage to 0 mV
<6>[ 1.616998] bq24180: Setting charger current to 0 mA
<6>[ 1.621856] bq24180: Disable charger
<6>[ 1.625506] bq24180: Set safety timer to 0 minutes
<6>[ 1.630826] semc_pwr_pltf: Setting up platform
<3>[ 1.635348] power_supply battery: driver failed to report `status' property
<3>[ 1.642773] bq24180: Charger Ready
<6>[ 1.655369] PPP generic driver version 2.4.2
<6>[ 1.655963] PPP Deflate Compression module registered
<6>[ 1.659039] PPP BSD Compression module registered
<6>[ 1.663778] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256)
(6 bit encapsulation enabled).
<6>[ 1.673376] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.681729] rmnet0 (): not using net_device_ops yet
<6>[ 1.686136] rmnet1 (): not using net_device_ops yet
<6>[ 1.691033] rmnet2 (): not using net_device_ops yet
<6>[ 1.695803] Linux video capture interface: v2.00
<7>[ 1.813333] msm_camdrv: <<<<<<<<<< Camera vendor [0] >>>>>>>>>>>
<7>[ 1.813353] msm_camdrv: <<<<<<<<<< Camera revision[12307] >>>>>>>>>>>
<3>[ 1.930343] bq24180: Charger Ready
<6>[ 2.272261] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[ 2.272399] allocated dma buffer at ffa1d000, dma_addr ccaf000
<6>[ 2.277611] status: e00020
<6>[ 2.280014] nandid: 5510bc20 maker 20 device bc
<6>[ 2.284563] ONFI probe : Found an ONFI compliant device NANDCBR4N9BZBC5
<6>[ 2.291658] Found a supported NAND device
<6>[ 2.295636] NAND Id : 0x5510bc20
<6>[ 2.298936] Buswidth : 16 Bits
<6>[ 2.302074] Density : 512 MByte
<6>[ 2.305273] Pagesize : 2048 Bytes
<6>[ 2.308571] Erasesize: 131072 Bytes
<6>[ 2.312053] Oobsize : 64 Bytes
<6>[ 2.315168] 2nd_bbm : 0
<6>[ 2.317686] CFG0 Init : 0xa85408c0
<6>[ 2.321254] CFG1 Init : 0x0004745e
<6>[ 2.324803] ECCBUFCFG : 0x00000203
<5>[ 2.328374] Creating 4 MTD partitions on "msm_nand":
<5>[ 2.333329] 0x000002c00000-0x00000fa00000 : "system"
<5>[ 2.339611] 0x00000fa00000-0x000012c00000 : "cache"
<5>[ 2.344109] 0x00001ffc0000-0x000020000000 : "appslog"
<5>[ 2.349089] 0x000012c00000-0x00001ffc0000 : "userdata"
<6>[ 2.354544] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<3>[ 2.359533] msm_chg_rpc_connect: connect compatible failed
<6>[ 2.365201] usb_set_composition: composition set to product id = 3137
<6>[ 2.371554] phy info257)
<6>[ 2.374684] usb_probe() io=8e01a000, irq=47, dma=ffa1e000(cca4000)
<6>[ 2.380594] Created the sysfs entry successfully
<6>[ 2.385101] Created the functions sysfs entry successfully
<6>[ 2.391774] usb_function_register: name = 'adb', map = 1
<6>[ 2.396276] usb_function_register: name = 'mass_storage', map = 4
<6>[ 2.402186] usb_set_composition: composition set to product id = 3137
<3>[ 2.409271] msm_hsusb_is_serial_num_null: rpc call success
<3>[ 2.414694] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[ 2.421243] msm_hsusb_send_productID: rpc call success
<6>[ 2.425584] msm_hsusb: functions bound. starting.
<6>[ 2.430314] usb_bind_func() (mass_storage)
<3>[ 2.434568] usb_start: pm_app_rpc connect failed
<6>[ 2.439526] usb_function_register: name = 'diag', map = 0
<6>[ 2.444514] msm_hsusb_phy_reset
<6>[ 2.448373] usb_function_register: name = 'modem', map = 2
<6>[ 2.453144] usb_function_register: name = 'nmea', map = 3
<6>[ 2.458578] usb_function_register: name = 'ethernet', map = 5
<6>[ 2.465061] synaptics_load_rmi4_func_regs: Func:f11_2D Query_Base:0x7a Cmd_Base:0x59 Ctrl_Base:0x26 Data_Base:0x18
<6>[ 2.475183] synaptics_load_rmi4_func_regs: Func:f08_BIST Query_Base:0x78 Cmd_Base:0x58 Ctrl_Base:0x20 Data_Base:0x15
<6>[ 2.485694] synaptics_load_rmi4_func_regs: Func:f01_RMI Query_Base:0x63 Cmd_Base:0x57 Ctrl_Base:0x1e Data_Base:0x13
<6>[ 2.601839] synaptics_ts_probe: nbr_panels:1 nbr_fingers:1 data_size:5
<6>[ 2.602733] synaptics_ts_probe: fw_rev:17 max_x:1632 max_y:2156
<6>[ 2.608656] synaptics_ts_probe: max_x 1632, max_y 2156
<6>[ 2.613771] synaptics_ts_probe: inactive_x 0 0, inactive_y 0 0
<6>[ 2.619574] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 2.625904] input: synaptics-rmi-touchscreen as /devices/virtual/input/input0
<6>[ 2.633146] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<6>[ 2.641888] GPIO Matrix Keypad Driver: Start keypad matrix for robyn_keypad in interrupt mode
<6>[ 2.650031] input: robyn_keypad as /devices/virtual/input/input1
<7>[ 2.656608] RTC Registering with rs30000048:00010000
<7>[ 2.657676] msm_rtc: dev (254:0)
<6>[ 2.657724] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<7>[ 2.664044] msm_rtc_secure: dev (254:1)
<6>[ 2.664064] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
<6>[ 2.672664] i2c /dev entries driver
<6>[ 2.677203] input: compass as /devices/virtual/input/input2
<6>[ 2.730606] Bosch Sensortec Device detected!
<6>[ 2.730618] BMA150/SMB380 registered I2C driver!
<6>[ 2.733861] register_chrdev
<6>[ 2.736793] class_create ok
<6>[ 2.739681] BMA150 device create ok
<6>[ 2.743949] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.747311] Bluetooth: HCI H4 protocol initialized
<6>[ 2.752108] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.757029] Bluetooth: HCILL protocol initialized
<7>[ 2.761731] bluetooth_power_init
<7>[ 2.761814] bt_power_probe
<6>[ 2.763421] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
<6>[ 2.768574] mmc0: 8 bit data mode disabled
<6>[ 2.772693] mmc0: 4 bit data mode enabled
<6>[ 2.776648] mmc0: polling status mode disabled
<6>[ 2.781116] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 2.787411] mmc0: Slot eject status = 0
<6>[ 2.791244] mmc0: Power save feature enable = 1
<6>[ 2.795749] mmc0: DM non-cached buffer at ffa20000, dma_addr 0x0cddc000
<6>[ 2.802356] mmc0: DM cmd busaddr 0x0cddc000, cmdptr busaddr 0x0cddc300
<6>[ 2.809724] lm3530 probing
<6>[ 2.815201] Registered semc device: lm3530-led
<6>[ 2.815973] lm3530 0-0036: version 0.1 loaded
<6>[ 2.820609] Adding I2C driver for LM35300)
<6>[ 2.824564] msm_pmic_flash_led probing
<6>[ 2.832014] Registered semc device: spotlight
<6>[ 2.832858] Registered semc device: flashled
<6>[ 2.836891] msm_pmic_flash_led version 0.1 loaded
<6>[ 2.845868] logger: created 64K log 'log_main'
<6>[ 2.846371] logger: created 256K log 'log_events'
<6>[ 2.856069] logger: created 64K log 'log_radio'
<6>[ 2.862094] Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[ 2.868554] No device for DAI CODEC_DAI
<4>[ 2.868644] No device for DAI CPU_DAI
<3>[ 2.875876] msm_soc: create pcms
<6>[ 2.876268] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[ 2.878413] msm_soc: ALSA MSM Mixer Setting
<6>[ 2.884941] ALSA device list:
<6>[ 2.885529] #0: msm-audio (MSM-CARD)
<6>[ 2.889313] TCP cubic registered
<6>[ 2.892486] NET: Registered protocol family 17
<6>[ 2.896921] Bluetooth: L2CAP ver 2.13
<6>[ 2.900586] Bluetooth: L2CAP socket layer initialized
<6>[ 2.905568] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.910071] Bluetooth: SCO socket layer initialized
<6>[ 2.917104] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.920104] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.924936] Bluetooth: RFCOMM ver 1.11
<6>[ 2.928651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.933988] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.939153] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.945766] RPC: Registered udp transport module.
<6>[ 2.949766] RPC: Registered tcp transport module.
<6>[ 2.954894] clock_late_init() disabled 15 unused clocks
<6>[ 2.960904] input: 7k_handset as /devices/virtual/input/input3
<6>[ 2.967043] smsm_entry 7, new intr_mask 0
<6>[ 2.969453] smsm_entry 6, new intr_mask 0
<6>[ 2.973643] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.994258] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
<6>[ 2.994918] msm_v4l2: msm_v4l2_init
<6>[ 2.998974] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:05 UTC (1277532365)
<6>[ 3.008203] Freeing init memory: 140K
<6>[ 3.120511] usb_lpm_enter: usb in low power mode
<6>[ 3.120628] hsusb: IDLE -> OFFLINE
<3>[ 3.171403] init: /init.rc: 218: invalid option 'busybox'
<3>[ 3.172109] init: /init.delta.rc: 74: ignored duplicate definition of service 'qmuxd'
<4>[ 3.233606] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 3.236084] mmc0: new SD card at address aaaa
<6>[ 3.250378] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
<6>[ 3.250734] mmcblk0: p1
<6>[ 3.363538] yaffs: dev is 32505856 name is "mtdblock0"
<6>[ 3.363658] yaffs: passed flags ""
<4>[ 3.366456] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>[ 3.476239] yaffs: restored from checkpoint
<4>[ 3.476386] yaffs_read_super: isCheckpointed 1
<6>[ 3.479724] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 3.484386] yaffs: passed flags ""
<4>[ 3.487751] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 3.573716] yaffs: restored from checkpoint
<4>[ 3.585258] yaffs_read_super: isCheckpointed 0
<6>[ 3.591041] yaffs: dev is 32505857 name is "mtdblock1"
<6>[ 3.591156] yaffs: passed flags ""
<4>[ 3.593948] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[ 3.601418] yaffs: restored from checkpoint
<4>[ 3.603759] yaffs_read_super: isCheckpointed 1
<3>[ 3.635841] init: execve /sbin/checkabortedflash
<3>[ 3.653221] init: waitpid return (PID = 1051)
<3>[ 3.653339] init: child process exited normally
<3>[ 3.741036] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>[ 3.772914] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[ 3.894298] SMD: ch 40 CLOSED -> OPENING
<6>[ 3.894483] SMD: ch 40 OPENING -> OPENED
<6>[ 3.897733] SMD: ch 41 CLOSED -> OPENING
<6>[ 3.900471] SMD: ch 41 OPENING -> OPENED
<6>[ 3.905264] SMD: ch 42 CLOSED -> OPENING
<6>[ 3.908278] SMD: ch 42 OPENING -> OPENED
<6>[ 4.492636] bq24180: Set charger safety limit voltage to 4200 mV
<6>[ 4.494706] bq24180: Set charger safety limit current to 650 mA
<6>[ 4.496751] bq24180: Set charge current termination to 200 mA
<6>[ 4.504173] proximity-sensor (th_set): threshold=27
<6>[ 4.509206] proximity-sensor (hyst_set): hysteresis=8
<6>[ 5.448834] [msm-audio:snd.c:snd_ioctl] snd_agc_ctl 1
<6>[ 5.456164] warning: `Mixer Thread fo' uses 32-bit capabilities (legacy support in use)
<6>[ 5.458816] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 1
<6>[ 5.468999] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 0
<6>[ 5.477079] [msm-audio:snd.c:snd_ioctl] snd_set_volume 26 0 7
<6>[ 5.477841] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 7
<6>[ 5.480276] [msm-audio:snd.c:snd_ioctl] snd_set_volume 28 0 7
<6>[ 5.481043] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 5.481694] [msm-audio:snd.c:snd_ioctl] snd_set_volume 30 0 7
<6>[ 5.482381] [msm-audio:snd.c:snd_ioctl] snd_set_volume 31 0 7
<6>[ 5.483063] [msm-audio:snd.c:snd_ioctl] snd_set_volume 32 0 7
<6>[ 5.483968] [msm-audio:snd.c:snd_ioctl] snd_set_volume 33 0 7
<6>[ 5.484656] [msm-audio:snd.c:snd_ioctl] snd_set_volume 34 0 7
<6>[ 5.485271] [msm-audio:snd.c:snd_ioctl] snd_set_volume 35 0 7
<6>[ 5.485914] [msm-audio:snd.c:snd_ioctl] snd_set_volume 36 0 7
<6>[ 5.486613] [msm-audio:snd.c:snd_ioctl] snd_set_volume 37 0 7
<6>[ 5.487503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 56 0 7
<6>[ 5.488218] [msm-audio:snd.c:snd_ioctl] snd_set_volume 38 0 7
<6>[ 5.488899] [msm-audio:snd.c:snd_ioctl] snd_set_volume 39 0 7
<6>[ 5.489566] [msm-audio:snd.c:snd_ioctl] snd_set_volume 40 0 7
<6>[ 5.490268] [msm-audio:snd.c:snd_ioctl] snd_set_volume 41 0 7
<6>[ 5.491174] [msm-audio:snd.c:snd_ioctl] snd_set_volume 42 0 7
<6>[ 5.491911] [msm-audio:snd.c:snd_ioctl] snd_set_volume 43 0 7
<6>[ 5.492576] [msm-audio:snd.c:snd_ioctl] snd_set_volume 44 0 7
<6>[ 5.493266] [msm-audio:snd.c:snd_ioctl] snd_set_volume 45 0 7
<6>[ 5.493894] [msm-audio:snd.c:snd_ioctl] snd_set_volume 46 0 7
<6>[ 5.494801] [msm-audio:snd.c:snd_ioctl] snd_set_volume 47 0 7
<6>[ 5.495534] [msm-audio:snd.c:snd_ioctl] snd_set_volume 48 0 7
<6>[ 5.496211] [msm-audio:snd.c:snd_ioctl] snd_set_volume 49 0 7
<6>[ 5.496873] [msm-audio:snd.c:snd_ioctl] snd_set_volume 50 0 7
<6>[ 5.497539] [msm-audio:snd.c:snd_ioctl] snd_set_volume 51 0 7
<6>[ 5.498448] [msm-audio:snd.c:snd_ioctl] snd_set_volume 52 0 7
<6>[ 5.499248] [msm-audio:snd.c:snd_ioctl] snd_set_volume 53 0 7
<6>[ 5.499889] [msm-audio:snd.c:snd_ioctl] snd_set_volume 54 0 7
<6>[ 5.500524] [msm-audio:snd.c:snd_ioctl] snd_set_volume 55 0 7
<6>[ 10.442193] pmem: successful request for physical address of pmem region id 3,
offset 41521152, len 4194304
<6>[ 10.500393] misc kgsl: firmware: requesting yamato_pm4.fw
<6>[ 10.510956] misc kgsl: firmware: requesting yamato_pfp.fw
<3>[ 10.512303] init: untracked pid 1153 exited
<3>[ 10.516329] init: untracked pid 1156 exited
<6>[ 33.928733] request_suspend_state: wakeup (3->0) at 33928558408
(2010-06-26 06:06:36.429746690 UTC)
<6>[ 35.140503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 5
<6>[ 35.340956] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 36.830411] bq24180: Strange HW behaviour. Got safety timer fault but HW timer is disabled.
<3>[ 36.830448] bq24180: Charger Ready
<3>[ 37.130403] bq24180: Charger Ready
<6>[ 37.960528] input: systemconnector as /devices/virtual/input/input4
<7>[ 38.090198] SEMC_PHF (Interrupt handler) Status changed. Headset is not inserted
<6>[ 38.090639] semc_power: Disabling DCOUT. Current: 1000
<6>[ 52.121653] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 52.121664] tick = 1932058
<6>[ 52.121671] stamp = 50413832199208961
<6>[ 52.130404] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:54 UTC (1277532414)
<3>[ 57.796259] binder: release proc 1527, transaction 6042, not freed
<6>[ 143.176619] [msm-audio:audmgr.c:audmgr_rpc_thread] start
<6>[ 143.184273] [msm-audio:audio_out.c:audio_enable]
<6>[ 143.184304] [msm-audio:audmgr.c:audmgr_enable] session 0x80532ca0
<6>[ 143.185274] [msm-audio:audmgr.crocess_audmgr_callback] rpc READY handle=0x00000000
<6>[ 143.185678] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<6>[ 143.237589] [msm-audio:audmgr.crocess_audmgr_callback] rpc CODEC_CONFIG
volume=0x00000406
<6>[ 143.239933] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] INIT_INFO Event
<6>[ 143.240533] [adsp:adsp.c:msm_adsp_get] opening module AUDPPTASK
<6>[ 143.241208] [adsp:adsp.c:msm_adsp_get] module AUDPPTASK has been registered
<6>[ 143.241234] [adsp:adsp.c:msm_adsp_enable] enable 'AUDPPTASK'state[0] id[17227122]
<6>[ 143.242614] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] rpc event=0, proc_id=2,
module=17227122, image=0
<6>[ 143.243199] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] module AUDPPTASK: READY
<6>[ 143.244721] [msm-audio:audpp.c:audpp_dsp_event] ENABLE
<6>[ 143.244749] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG ENABLE
<3>[ 143.244831] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<3>[ 143.244886] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<6>[ 146.284549] [msm-audio:audio_out.c:audio_dsp_event] PCMDMAMISSED 32
<6>[ 149.222186] [msm-audio:audio_out.c:audio_disable]
<6>[ 149.222828] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG DISABLE
<6>[ 149.222931] [msm-audio:audpp.c:audpp_dsp_event] DISABLE
<6>[ 149.223009] [msm-audio:audpp.c:audpp_disable] Received CFG_MSG_DISABLE from ADSP
<6>[ 149.223061] [adsp:adsp.c:msm_adsp_disable] disable 'AUDPPTASK'
<6>[ 149.226809] [adsp:adsp.c:msm_adsp_disable_locked] disable interrupt
<6>[ 149.226864] [adsp:adsp.c:msm_adsp_put] closing module AUDPPTASK
<6>[ 149.226948] [msm-audio:audmgr.c:audmgr_disable] session 0x80532ca0
<6>[ 149.230789] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<3>[ 149.241483] [msm-audio:audmgr.crocess_audmgr_callback] DISABLED
Bin4ry said:
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
Click to expand...
Click to collapse
I take it he has a generic handset or does he have a provider handset?
*edit*
Just tried with no luck
*double post*
No OTA in Spain as well
Tried with Movistar, but it was already in 11A08 and said "already in latest version"; debranded to 10A136 and tried again but no luck,same message trought OTA. Update detected in SEUS from 10A136 to 11A08, updated succefully to debranded version.
Could it be that OTA examines both the Fyle System Version and Software Version? I entered service menu and the data was:
Phone Software Version
1235-3408_1.0.A.1.36
GENERIC - user
File System Version
WORLD-1-8_1.1A.0.8
So it seems that the software version was downgraded, but it kept the 11A08 in file system. Checking it in Settings-> About the Phone it was still marked as 11A08 Compilation.
Sorry for the long post, maybe it's all a nonsense, but just trying to get the OTA info I stepped into this and seemed curious... I'll keep checking.
Good luck for everybody!!
So I've seen plenty of topics about other phones but had a difficult time finding anything regarding the HTC legend. I've already soldered my USB to micro USB and took a blade to a micro usb charger cord.
What I'm unsure about is how to tell if I went into USB host mode or not using the micro usb input I've got. It didn't have any noticable resistor on it, this is from a wall to phone charger if that matters.
I'm using Cyanogenmod 7.0 RC2
From what it looks like there's only the solder points for that + and - wires
Picture of micro usb input: http://i42.tinypic.com/116i493.jpg
Everything in one happy picture(do not click if bad soldering makes you cry): http://i41.tinypic.com/2ykxbtu.jpg
When I connected a mouse I don't use to see if the light would come on but that wasn't promising. I removed the micro usb when the little skateboarding startup logo showed and waited for the phone to start, when I plugged in my device dmesg only showed some ALS lines, which from short searching revealed it was something regarding GSM, but nothing regarding a mouse or anything about device.
Now I'm not expecting to use a USB mouse I want to use a USB keyboard(roll-up ) I just don't have a USB keyboard right now to really test.
Thanks for your time.
I compiled the kernel ver 2.6.25 for htc legend (cyanogen 7.2 rom), applied the hack from Sven Killing, hacked a home made cable for usb host mode and tested keyboard and mouse and both work fine!
I made some changes on the kernel (Kconfig and ehci-msm7201.c / .h), if somebody need it i can upload my kernel.
my kernel dmesg:
...
<6>[ 0.260314] [DISP]mdp_probe: initialized
<6>[ 0.260986] usbcore: registered new interface driver usbfs
<6>[ 0.261322] usbcore: registered new interface driver hub
<6>[ 0.261688] usbcore: registered new device driver usb
<6>[ 0.262207] msm_i2c_probe
<6>[ 0.262542] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.264587] Bluetooth: Core ver 2.15
<6>[ 0.264862] NET: Registered protocol family 31
<6>[ 0.265075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.265441] Bluetooth: HCI socket layer initialized
<6>[ 0.265838] Switching to clocksource gp_timer
<6>[ 0.267547] NET: Registered protocol family 2
<6>[ 0.267944] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.268798] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.269531] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.270294] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.270507] TCP reno registered
<6>[ 0.270874] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.271087] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.271697] NET: Registered protocol family 1
<6>[ 0.272155] Unpacking initramfs...
<6>[ 0.291229] Freeing initrd memory: 144K
...
<6>[ 0.692687] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.692871] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.694946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 0.695343] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
<7>[ 0.695678] usb_hcd_msm7201_probe()
<7>[ 0.695861] initializing MSM7201/QSD8X50/MSM7227 USB Controller
<6>[ 0.716461] msm_hsusb msm_hsusb: Qualcomm MSM7201/QSD8X50/MSM7227 On-Chip EHCI Host Controller
<6>[ 0.716888] msm_hsusb msm_hsusb: new USB bus registered, assigned bus number 1
<7>[ 0.717132] msm_hsusb msm_hsusb: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>[ 0.717620] msm_hsusb msm_hsusb: park 0
<7>[ 0.717834] msm_hsusb msm_hsusb: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 0.718261] msm_hsusb msm_hsusb: irq 47, io mem 0xa0800000
<6>[ 0.737243] hub 1-0:1.0: USB hub found
<6>[ 0.737457] hub 1-0:1.0: 1 port detected
<4>[ 0.738037] ------------[ cut here ]------------
<4>[ 0.738433] WARNING: at kernel/irq/manage.c:290 enable_irq+0x5c/0xb4()
<4>[ 0.738616] Unbalanced enable for IRQ 47
<4>[ 0.738983] Modules linked in:
<4>[ 0.739410] [<c00359e8>] (unwind_backtrace+0x0/0xf0) from [<c0072068>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.739807] [<c0072068>] (warn_slowpath_common+0x4c/0x64) from [<c0072100>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.740203] [<c0072100>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00aa6a4>] (enable_irq+0x5c/0xb4)
<4>[ 0.740417] [<c00aa6a4>] (enable_irq+0x5c/0xb4) from [<c0275714>] (usb_hcd_msm7201_probe+0x25c/0x30c)
<4>[ 0.740814] [<c0275714>] (usb_hcd_msm7201_probe+0x25c/0x30c) from [<c0245e44>] (platform_drv_probe+0x18/0x1c)
<4>[ 0.741210] [<c0245e44>] (platform_drv_probe+0x18/0x1c) from [<c0244fb8>] (driver_probe_device+0xa8/0x158)
<4>[ 0.741607] [<c0244fb8>] (driver_probe_device+0xa8/0x158) from [<c02450c8>] (__driver_attach+0x60/0x84)
<4>[ 0.741973] [<c02450c8>] (__driver_attach+0x60/0x84) from [<c024480c>] (bus_for_each_dev+0x48/0x84)
<4>[ 0.742370] [<c024480c>] (bus_for_each_dev+0x48/0x84) from [<c0244144>] (bus_add_driver+0x9c/0x21c)
<4>[ 0.742584] [<c0244144>] (bus_add_driver+0x9c/0x21c) from [<c0245398>] (driver_register+0xa8/0x138)
<4>[ 0.742980] [<c0245398>] (driver_register+0xa8/0x138) from [<c0019938>] (ehci_hcd_init+0xac/0x108)
<4>[ 0.743377] [<c0019938>] (ehci_hcd_init+0xac/0x108) from [<c0030384>] (do_one_initcall+0x5c/0x1b0)
<4>[ 0.743743] [<c0030384>] (do_one_initcall+0x5c/0x1b0) from [<c0008410>] (kernel_init+0xb0/0x16c)
<4>[ 0.744140] [<c0008410>] (kernel_init+0xb0/0x16c) from [<c00318a8>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.744384] ---[ end trace a88e7bb8f2db6923 ]---
<6>[ 0.745025] android init
<6>[ 0.745269] android_probe pdata: c0537a70
<6>[ 0.745635] f_adb init
<6>[ 0.745819] android_register_function adb
<6>[ 0.746032] f_mass_storage init
<6>[ 0.746276] fsg_probe pdev: c0537bd8, pdata: c05383bc
<6>[ 0.746795] android_register_function usb_mass_storage
<6>[ 0.746978] f_rndis init
<6>[ 0.747314] android_register_function rndis
<6>[ 0.747650] f_accessory init
<6>[ 0.747863] android_register_function accessory
<3>[ 0.748626] msm_i2c msm_i2c.0: error, status c8 (20,E4,00)(20,F4,00)(cnt:1,pos:0)
<3>[ 0.749053] msm_i2c msm_i2c.0: Error during data xfer (-5) (20,E4,00)
<6>[ 0.856872] synaptics_ts_probe: Product Major Version 1
<6>[ 0.857421] synaptics_ts_probe: Product Minor Version 3
<6>[ 0.857940] synaptics_ts_probe: product property 2
<6>[ 0.858642] synaptics_ts_probe: device control 81
<6>[ 0.859191] synaptics_ts_probe: interrupt enable 1
<6>[ 0.877288] synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0
<6>[ 0.896911] synaptics_ts_probe: Sensor properties 701
<6>[ 0.976715] synaptics_ts_probe: max_x 3668, max_y 5460
<6>[ 0.976928] synaptics_ts_probe: inactive_x -11 -11, inactive_y -11 -11
<6>[ 0.977294] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 0.977508] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right: 0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 0.977874] synaptics_ts_probe: ts_raw_width: 3646, ts_raw_height: 5438
....
<6>[ 2.079620] [KEY] GPIO Matrix Keypad Driver: Start keypad matrix for legend-keypad in interrupt mode
<6>[ 2.080291] [KEY] GPIO Input Driver: Start gpio inputs for legend-keypad in interrupt mode
<6>[ 2.081024] input: legend-keypad as /devices/virtual/input/input3
<6>[ 2.082214] input: lightsensor-level as /devices/virtual/input/input4
<6>[ 2.082977] [LS][CM3602] set_ls_kvalue: ALS calibrated als_kadc=0x6da50053
<6>[ 2.083160] [LS][CM3602] set_ls_kvalue: als_kadc=0x53, als_gadc=0xc0
<6>[ 2.083374] [LS][CM3602] ls_table: data[0] , data[0] = 0, 0
<6>[ 2.083740] [LS][CM3602] ls_table: data[1] , data[1] = 0, e
<6>[ 2.083953] [LS][CM3602] ls_table: data[2] , data[2] = 0, 21
<6>[ 2.084320] [LS][CM3602] ls_table: data[3] , data[3] = 0, 5f
<6>[ 2.084503] [LS][CM3602] ls_table: data[4] , data[4] = 0, 85
<6>[ 2.084869] [LS][CM3602] ls_table: data[5] , data[5] = 0, ab
<6>[ 2.085083] [LS][CM3602] ls_table: data[6] , data[6] = 0, d1
<6>[ 2.085449] [LS][CM3602] ls_table: data[7] , data[7] = 1, 2d
<6>[ 2.085632] [LS][CM3602] ls_table: data[8] , data[8] = 1, 73
<6>[ 2.086029] [KEY] gpio_keys_scan_keys: key 1-116, 0 (20) changed to 0
<6>[ 2.086242] [LS][CM3602] ls_table: data[9] , data[9] = 3, ff
<7>[ 2.088623] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 2.089141] using input dev h2w headset for key reset
<6>[ 2.089538] using input dev legend-keypad for key reset
<6>[ 2.090332] input: curcial-oj as /devices/virtual/input/input5
<6>[ 2.090881] using input dev curcial-oj for key reset
<3>[ 2.092376] curcial_oj_poweronJower status ok
<6>[ 2.140625] OpticalJoystick Device ID: 0d
<6>[ 2.143493] OJ Driver: Revision : 02
<6>[ 2.146240] OJ: driver loaded
<6>[ 2.147460] using rtc device, msm_rtc, for alarms
<6>[ 2.147857] rs30000048:00010004 rs30000048:00010004: rtc core: registered msm_rtc as rtc0
<6>[ 2.148468] AKM8973 compass driver: init
<6>[ 2.149536] input: compass as /devices/virtual/input/input6
<6>[ 2.150421] [FLT]adp1650 Led Flash driver: init
<4>[ 2.150848] [CAM]s5k4e1gx_init
<4>[ 2.151123] [CAM]__s5k4e1gx_probe
<6>[ 2.151336] [CAM]s5k4e1gx_vreg_enable camera vreg on
<3>[ 2.151672] [CAM]sensor platform_data didnt register
<3>[ 2.151885] [CAM]__s5k4e1gx_probe fail sensor power on error
<6>[ 2.152404] [CAM]sctrl.node 0
<4>[ 2.152587] [CAM]s5k4e1gx_sensor_probe()
<6>[ 2.152832] [CAM]s5k4e1gx_probe called!
<6>[ 2.203308] [CAM]s5k4e1gx_probe successed! rc = 0
<6>[ 2.203552] [CAM]s5k4e1gx s->node 0
<6>[ 2.249176] [CAM]s5k4e1gx_sensor_init(): reseting sensor.
<6>[ 2.250305] [CAM]sensor_lc_disable=0
<4>[ 2.334533] [CAM]sensor evt version : 0x10
<4>[ 2.334716] [CAM]use analog_settings_evt3
<6>[ 2.345367] s5k4e1gx_sysfs_init : kobject_create_and_add
<6>[ 2.345581] s5k4e1gx_sysfs_init : sysfs_create_file
<6>[ 2.346893] device-mapper: uevent: version 1.0.3
<6>[ 2.347534] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
<6>[ 2.348144] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.348358] Bluetooth: HCI H4 protocol initialized
<6>[ 2.348724] Bluetooth: HCILL protocol initialized
<7>[ 2.349731] msmsdcc_platform_status_irq: 102
<6>[ 2.349945] mmc0: Slot status change detected (0 -> 1)
<4>[ 2.350402] legend_sdslot_switchvdd::vdd=00000000 sdslot_vdd=ffffffff
<6>[ 2.350769] legend_sdslot_switchvdd: Disabling SD slot power
<4>[ 2.350982] off:MCI_Power=00000000
<4>[ 2.351165] off:MCI_Power=00000000
<6>[ 2.353820] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,102 dma 8
<6>[ 2.354003] mmc0: Platform slot type: SD
<6>[ 2.354370] mmc0: 4 bit data mode enabled
<6>[ 2.354583] mmc0: 8 bit data mode disabled
<6>[ 2.354766] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 100000000 Hz
<6>[ 2.355133] mmc0: Slot eject status = 0
<6>[ 2.355346] mmc0: Power save feature enable = 1
<6>[ 2.355712] mmc0: DM non-cached buffer at ffa4a000, dma_addr 0x25669000
<6>[ 2.355895] mmc0: DM cmd busaddr 0x25669000, cmdptr busaddr 0x25669300
<7>[ 2.356689] Registered led device: amber
<7>[ 2.357055] Registered led device: green
<7>[ 2.357360] Registered led device: button-backlight
<6>[ 2.357757] microp_led_probe: succeeded
<6>[ 2.358612] usbcore: registered new interface driver usbhid
<6>[ 2.359008] usbhid: USB HID core driver
<6>[ 2.359741] logger: created 64K log 'log_main'
<6>[ 2.360076] logger: created 256K log 'log_events'
<6>[ 2.360565] logger: created 64K log 'log_radio'
<6>[ 2.360900] logger: created 64K log 'log_system'
<6>[ 2.361511] GACT probability NOT on
<6>[ 2.361724] Mirror/redirect action on
<6>[ 2.361938] u32 classifier
<6>[ 2.362121] Actions configured
<6>[ 2.362487] Netfilter messages via NETLINK v0.30.
<6>[ 2.362792] nf_conntrack version 0.5.0 (4653 buckets, 18612 max)
<4>[ 2.363464] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 2.363677] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 2.364044] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 2.364654] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.365112] xt_time: kernel timezone is -0000
<6>[ 2.365661] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.366210] arp_tables: (C) 2002 David S. Miller
<6>[ 2.366485] TCP cubic registered
<6>[ 2.367309] NET: Registered protocol family 10
<6>[ 2.368255] lo: Disabled Privacy Extensions
<6>[ 2.369659] Mobile IPv6
<6>[ 2.370025] IPv6 over IPv4 tunneling driver
<6>[ 2.370910] sit0: Disabled Privacy Extensions
<6>[ 2.371887] ip6tnl0: Disabled Privacy Extensions
<6>[ 2.372406] NET: Registered protocol family 17
<6>[ 2.372650] NET: Registered protocol family 15
<6>[ 2.373229] Bluetooth: L2CAP ver 2.14
<6>[ 2.373413] Bluetooth: L2CAP socket layer initialized
<6>[ 2.373626] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.373992] Bluetooth: SCO socket layer initialized
<6>[ 2.374328] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.374694] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.374877] Bluetooth: RFCOMM ver 1.11
<6>[ 2.375091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.375457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.376251] clock_late_init() disabled 20 unused clocks
<6>[ 2.376617] [Port list] init()
<6>[ 2.376892] [Port list] Virtual Address for port_list: [f8185a38]
<6>[ 2.377258] [Port list] Physical Address for port_list: [185A38]
<4>[ 2.378417] legend_wifi_init: start
<6>[ 2.379028] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.381317] rs30000048:00010004 rs30000048:00010004: setting system clock to 2012-07-25 19:15:10 UTC (1343243710)
<4>[ 2.381774] Warning: unable to open an initial console.
<6>[ 2.382202] Freeing init memory: 160K
<3>[ 2.386505] init: /init.legend.rc: 1: invalid command 'device'
<4>[ 2.447052] legend_sdslot_switchvdd::vdd=00000011 sdslot_vdd=00000000
<6>[ 2.447509] legend_sdslot_switchvdd: Setting level to 2900
<4>[ 2.452728] on:MCI_Power=00000042
<4>[ 2.458099] on:MCI_Power=00000043
<6>[ 2.508544] yaffs: dev is 32505859 name is "mtdblock3" rw
<6>[ 2.508758] yaffs: passed flags ""
<7>[ 2.509155] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
<4>[ 2.546569] legend_sdslot_switchvdd::vdd=00000010 sdslot_vdd=00000011
<6>[ 2.546936] legend_sdslot_switchvdd: Setting level to 2850
<7>[ 2.692291] yaffs: restored from checkpoint
<7>[ 2.693237] yaffs_read_super: isCheckpointed 1
<6>[ 2.697631] yaffs: dev is 32505861 name is "mtdblock5" rw
<6>[ 2.698059] yaffs: passed flags ""
<7>[ 2.698272] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
<4>[ 2.756988] mmc0: high speed mode but max_dtr = 50000000
<4>[ 2.757629] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 2.758026] mmc0: new high speed SDHC card at address 80e6
<6>[ 2.758819] mmcblk0: mmc0:80e6 SU08G 7.40 GiB
<6>[ 2.759674] mmcblk0: p1
<7>[ 2.856689] block 195 is bad
<7>[ 2.889587] block 408 is bad
<7>[ 2.995269] block 1089 is bad
<7>[ 4.499725] yaffs_read_super: isCheckpointed 0
<6>[ 4.500366] yaffs: dev is 32505860 name is "mtdblock4" rw
<6>[ 4.500579] yaffs: passed flags ""
<7>[ 4.500915] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<7>[ 4.594360] yaffs_read_super: isCheckpointed 0
<3>[ 5.087188] init: service 'console' requires console
<6>[ 5.102844] [Port list] Add port [5555]
<6>[ 5.103179] [Port list] [1] = 5555
<6>[ 5.295257] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[ 5.380798] [SMD]SMD: ch 0 0 -> 1
<6>[ 5.381103] [SMD]SMD: ch 0 1 -> 2
<6>[ 5.389373] [SMD]SMD: ch 39 0 -> 1
<6>[ 5.389648] [SMD]SMD: ch 39 1 -> 2
<6>[ 5.389862] qmi: smd opened
<6>[ 5.390686] qmi: ctl: wds use client_id 0x01
<6>[ 5.391693] [SMD]SMD: ch 40 0 -> 1
<6>[ 5.391937] [SMD]SMD: ch 41 0 -> 1
<6>[ 5.392150] [SMD]SMD: ch 40 1 -> 2
<6>[ 5.392486] qmi: smd opened
<6>[ 5.392700] [SMD]SMD: ch 41 1 -> 2
<6>[ 5.392913] qmi: smd opened
<6>[ 5.393707] qmi: ctl: wds use client_id 0x01
<6>[ 5.393920] qmi: ctl: wds use client_id 0x01
<6>[ 6.343536] [AUD][snd.c:snd_ioctl] snd_set_device 1 1 1
<6>[ 6.344940] [AUD][snd.c:snd_rpc_thread] snd_rpc_thread() start
<6>[ 6.345306] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 6.347076] [AUD][snd.c:snd_ioctl] snd_set_volume 256 0 5
<6>[ 6.348754] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 12.975891] [DISP]msmfb: pan_update in state(1)
<6>[ 12.975891] [DISP]msmfb: full update starting
<6>[ 13.022674] [DISP]msmfb: full update completed
<6>[ 13.022918] [DISP]msmfb: turning on panel
<6>[ 13.023132] [DISP]lcdc_unblank: ()
<7>[ 13.023498] oled_panel_unblank type 0
<7>[ 13.023681] already unblank
<6>[ 13.158996] msm_kgsl: initilized dev=1 mmu=on
<7>[ 13.230957] [LS][CM3602] lightsensor_ioctl: get enabled status: 0
<6>[ 13.231597] [PS][CM3602] capella_cm3602_disable
<7>[ 13.231964] [PS][CM3602] capella_cm3602_disable: already disabled
<6>[ 13.232177] [PS][CM3602] capella_cm3602_disable
<7>[ 13.232360] [PS][CM3602] capella_cm3602_disable: already disabled
<2>[ 13.481384] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.481872] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.482208] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<3>[ 13.489410] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.496582] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.497070] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.497467] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0004924b
<3>[ 13.498870] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.569274] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.569671] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0002724b
<3>[ 13.570648] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.756134] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.756591] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<3>[ 13.756927] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<6>[ 20.758483] [BATT] SMEM_BATT: get_batt_info: batt_id=4, batt_vol=3704, batt_temp=347, batt_current=1, eval_current=0, level=34, charging_source=0, charging_enabled=0, full_bat=1300000, over_vchg=0 hv_enabled=0 at 20751727586 (2012-07-25 19:15:28.862563728 UTC)
<6>[ 20.759552] [BATT] SMEM_BATT: get_batt_info: batt_id=4, batt_vol=3704, batt_temp=347, batt_current=1, eval_current=0, level=34, charging_source=0, charging_enabled=0, full_bat=1300000, over_vchg=0 hv_enabled=0 at 20752795701 (2012-07-25 19:15:28.863631844 UTC)
<6>[ 20.813812] [VIB] er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 21.683471] [AUD][snd.c:snd_ioctl] snd_set_volume 256 0 4
<6>[ 21.685272] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 22.412597] [VIB] er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 22.425964] [VIB] Thread-43(parent:zygote): vibrates 1 msec
<6>[ 22.427124] [ATS][set_vibration][successful]
<6>[ 22.427368] [VIB]vibrator_timer_func
<7>[ 22.432891] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 22.432922] [LS][CM3602] lightsensor_enable
<6>[ 22.436004] request_suspend_state: wakeup (3->0) at 22428485397 (2012-07-25 19:15:30.540084479 UTC)
<4>[ 22.442443] set_backlight_level:11
<6>[ 22.448455] [VIB] Thread-43(parent:zygote): vibrates 21 msec
<6>[ 22.450683] [ATS][set_vibration][successful]
<6>[ 22.469848] [VIB]vibrator_timer_func
<6>[ 22.764556] [LS][CM3602] ALS value: 0x0, level: 1 #
<6>[ 24.199127] [GSNR] Gsensor enable
<4>[ 24.610534] set_backlight_level:27
<6>[ 31.914062] [CAM]led_ril_status_value = 0
<6>[ 31.914398] phone_call_status_store: phone_call_status 0
<6>[ 31.914672] [CAM]led_ril_status_value = 0
<6>[ 31.915069] phone_call_status_store: phone_call_status 0
<6>[ 33.601135] [email protected], 4102
<6>[ 33.606445] [VIB] WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 33.638183] [VIB] Thread-60(parent:zygote): vibrates 10 msec
<6>[ 33.639495] [ATS][set_vibration][successful]
<6>[ 33.648406] [VIB]vibrator_timer_func
<6>[ 33.668975] [VIB] Thread-60(parent:zygote): vibrates 30 msec
<6>[ 33.670318] [ATS][set_vibration][successful]
<6>[ 33.699432] [VIB]vibrator_timer_func
<6>[ 33.785430] [email protected], 3759
<6>[ 34.171966] [VIB] WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 34.184417] [VIB] Thread-61(parent:zygote): vibrates 10 msec
<6>[ 34.185485] [ATS][set_vibration][successful]
<6>[ 34.194824] [VIB]vibrator_timer_func
<6>[ 34.215423] [VIB] Thread-61(parent:zygote): vibrates 30 msec
<6>[ 34.216613] [ATS][set_vibration][successful]
<6>[ 34.245849] [VIB]vibrator_timer_func
<6>[ 46.455596] [KEY] gpiomatrix: key 158, 2-0 (33-42) changed to 1
<6>[ 46.455993] [ATS][press_back][complete]
<6>[ 46.695861] [KEY] gpiomatrix: key 158, 2-0 (33-42) changed to 0
<6>[ 60.297607] Release 'boot-time' no_halt_lock
<7>[ 83.004089] msm_hsusb msm_hsusb: GetStatus port 1 status 8c001002 POWER sig=se0 CSC
<7>[ 83.077819] msm_hsusb msm_hsusb: GetStatus port 1 status 84001403 POWER sig=k CSC CONNECT
<6>[ 83.357788] usb 1-1: new low speed USB device using msm_hsusb and address 2
<7>[ 83.417724] msm_hsusb msm_hsusb: port 1 high speed
<7>[ 83.418640] msm_hsusb msm_hsusb: GetStatus port 1 status 84001405 POWER sig=k PE CONNECT
<6>[ 83.541931] input: USB-compliant keyboard as /devices/platform/msm_hsusb/usb1/1-1/1-1:1.0/input/input7
<7>[ 83.543029] usb 1-1: link qh8-0601/c61abca0 start 1 [1/2 us]
<6>[ 83.547912] using input dev USB-compliant keyboard for key reset
<6>[ 83.628845] generic-usb 0003:062A:0201.0001: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-msm_hsusb-1/input0
<6>[ 83.720245] input: USB-compliant keyboard as /devices/platform/msm_hsusb/usb1/1-1/1-1:1.1/input/input8
<7>[ 83.725402] usb 1-1: link qh8-0601/c8fdf520 start 2 [1/2 us]
<6>[ 83.725982] using input dev USB-compliant keyboard for key reset
<6>[ 83.753570] generic-usb 0003:062A:0201.0002: input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-msm_hsusb-1/input1
<6>[ 84.002807] [BATT] M2A_RPC: cable_update: USB at 83995563030 (2012-07-25 19:16:32.106887454 UTC)
<6>[ 84.003417] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 84.003631] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 157.127685] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 157.346679] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
<6>[ 165.024993] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 165.180328] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
<6>[ 202.730560] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 202.885864] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
Hi,
I have a HK version Streak 5, wanna to upgrade it to stock 360.
The upgrade process is successful, but the wifi shows "error" after boot.
Then I revert it to stock 318, the wifi works again.
Here is one part of the bootlog with 360
==from 360 bootlog==
<4>[ 196.603672] dhd_module_init: sdio_register_driver failed
<4>[ 198.190332] dhd_bus_start failed bus is not ready
I guess that is reason, but I don get how to overcome it.
Code:
<4>[ 193.240389] BootLog, +dhd_module_init
<4>[ 193.240407] HW rev:#22
<4>[ 193.395788] WLAN init: bt pulse start **************
<4>[ 193.507750] WLAN init: bt pulse done ***************
<4>[ 193.610019]
<4>[ 193.610026] Dongle Host Driver, version 4.217.63.0
<4>[ 193.610045]
<4>[ 193.610048] Dongle Host Driver, version 4.217.63.0
<4>[ 193.610061] BootLog, -dhd_module_init, ret=0
<7>[ 193.672594] mmc1: queuing CIS tuple 0x80 length 7
<7>[ 193.675755] mmc1: queuing CIS tuple 0x80 length 2
<7>[ 193.684456] mmc1: queuing CIS tuple 0x80 length 9
<7>[ 193.702528] mmc1: queuing CIS tuple 0x80 length 21
<6>[ 193.714406] mmc1: new SDIO card at address 0001
<4>[ 193.726534] DHD: dongle ram size is set to 393216(orig 393216)
<4>[ 196.603672] dhd_module_init: sdio_register_driver failed
<4>[ 196.603749] module dhd is loaded by WifiService(240)
<4>[ 198.190332] dhd_bus_start failed bus is not ready
<4>[ 198.196259] eth0: Broadcom Dongle Host Driver mac=00:00:00:00:00:00
<4>[ 198.451144] Binder Thread #(296) sends SIGKILL to id.partnersetup(594)
<4>[ 205.735104] oid.setupwizard(313) sends SIGKILL to oid.setupwizard(313)
<6>[ 205.743517] binder: 155:155 transaction failed 29189, size 52-0
<4>[ 206.909914] ActivityManager(171) sends SIGKILL to enetworksetting(575)
<4>[ 208.031582] Binder Thread #(296) sends SIGKILL to com.android.mms(536)
<4>[ 208.042856] Binder Thread #(297) sends SIGKILL to d.apps.uploader(617)
<4>[ 211.839349] Binder Thread #(159) sends SIGKILL to oid.voicedialer(588)
<4>[ 211.850506] Binder Thread #(297) sends SIGKILL to com.svox.pico(627)
<4>[ 216.520099] Binder Thread #(295) sends SIGKILL to .cooliris.media(608)
<4>[ 217.033596] Binder Thread #(295) sends SIGKILL to d.process.media(405)
<6>[ 219.436029] mmc1: card 0001 removed
<4>[ 219.440976] module dhd is unloaded by WifiService(240)
I have two question
1. Should I upgrade other mbns with stock 360 ?? (I already flash dps1 & amss)
2. How to disable the auto upgrade system check ?? (At least I don want the upgrade information if I need to use it with stock 318)
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Suddenly after taking my phone out on a rainy day, my wifi stopped working. I am sure water never went it. I have tried multiple things to make it work like factory reset, changing the ROM to jelly bean and currently running the kernel 3.0.31-siyah-s2-v5.0, model GT-I9100 android version 4.1.2
Kindly Help.I am seeing the dmesg terminal logs as attached and snippet below.
<4>[ 104.060063] ## wifi_probe
<4>[ 104.060090] wifi_set_power = 1
<6>[ 104.060111] ------------------------------------------------
<6>[ 104.060145] ------------------------------------------------
<6>[ 104.060188] brcm_wlan_power Enter: power on
<6>[ 104.060215] gpio_table = [2]
<7>[ 104.060442] WLAN: GPIO_WLAN_EN = 1
<6>[ 104.094096] mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 104.120714] mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 104.170090] mif: usb_port_resume: 1283, 4
<6>[ 104.249999] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
<4>[ 104.265090] wifi_set_carddetect = 1
<6>[ 104.265114] gpio_table = [6]
<6>[ 104.265343] Test logs pdev : c0ccd110 s3c_device_hsmmc3 c0ccd110
<6>[ 104.265378] Test logs notify_func = hsmmc3_notify_func: c083e75c
<6>[ 104.265416] mmc2: card inserted.
<6>[ 104.495446] mmc2: cmd 52 command timeout error
<6>[ 104.495936] mmc2: cmd 52 command timeout error
<6>[ 104.499846] mmc2: cmd 8 command timeout error
<4>[ 104.511333] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 104.513886] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
<6>[ 104.573970] mmc2: new high speed SDIO card at address 0001
<4>[ 104.785592] alloc static buf at e3a00000!
<4>[ 104.786022] dhdsdio_probe : no mutex held. set lock
<6>[ 105.007466] set_gps_uart_op: off
<6>[ 105.433663] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
<6>[ 106.011099] mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 106.040827] mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 106.090112] mif: usb_port_resume: 1283, 4
<3>[ 106.158197] binder: release proc 13734, transaction 52072, not freed
<3>[ 106.158236] binder: release proc 13734, transaction 52103, not freed
<3>[ 106.296134] mmc2: cmd 53 data timeout error
<4>[ 106.296964] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92F1 signature read
@0x18000000=0xffffffff
<3>[ 107.808869] mmc2: cmd 53 data timeout error
<4>[ 107.809040] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92dhdsdio_probe_attach: si_attach
failed!
<4>[ 107.809193] dhdsdio_probe: dhdsdio_probe_attach failed
<4>[ 107.809284] dhdsdio_probe : the lock is released.
<4>[ 107.816772] dhd_module_init: sdio_register_driver fail
<4>[ 107.816919] bcmsdh_sdmmc: bcmsdh_sdmmc_remove Enter
<4>[ 107.824497] ## wifi_remove
<4>[ 107.824549] wifi_set_power = 0
<6>[ 107.824599] ------------------------------------------------
<6>[ 107.824676] ------------------------------------------------
<6>[ 107.824761] brcm_wlan_power Enter: power off
<6>[ 107.824828] gpio_table = [2]
<7>[ 107.824887] WLAN: GPIO_WLAN_EN = 0
<4>[ 107.925157] wifi_set_carddetect = 0
<6>[ 107.925225] gpio_table = [6]
<6>[ 107.925503] Test logs pdev : c0ccd110 s3c_device_hsmmc3 c0ccd110
<6>[ 107.925589] Test logs notify_func = hsmmc3_notify_func: c083e75c
<6>[ 107.925678] mmc2: card inserted.
<6>[ 107.965872] mif: link_pm_irq_handler: gpio [HWK] get [0]
<6>[ 107.995841] mif: link_pm_irq_handler: gpio [HWK] get [1]
<6>[ 108.045163] mif: usb_port_resume: 1283, 4
<6>[ 108.125196] mmc2: cmd 7 command timeout error
<6>[ 108.125256] mmc2: cmd 7 command timeout error
<6>[ 108.125307] mmc2: cmd 7 command timeout error
<6>[ 108.125356] mmc2: cmd 7 command timeout error
<6>[ 108.136243] mmc2: card 0001 removed
<6>[ 108.170596] mmc2: cmd 52 command timeout error
<6>[ 108.171186] mmc2: cmd 52 command timeout error
<6>[ 108.174766] mmc2: cmd 8 command timeout error
<6>[ 108.175114] mmc2: cmd 5 command timeout error
<6>[ 108.175443] mmc2: cmd 5 command timeout error
<6>[ 108.175773] mmc2: cmd 5 command timeout error
<6>[ 108.176101] mmc2: cmd 5 command timeout error
<6>[ 108.176500] mmc2: cmd 55 command timeout error
<6>[ 1
Hello
SKotreboval by som apoň originál firmware z vašich tabletov kto má tento. Na stránkach MyAudio
EN: I need original Firmware(ROM) from this tablet. On product website
Code:
ht tp:// slovensky. myaudioworld. com/mysupport/firmware/series-1016-dcc/
SK:som nasiel nejake "firmware" ktoré sú vo forme 5001.img a 5002.img avšak zverejnený oficiálny návod nefunguje (vám fungoval? ako ste postupovali?)
EN: i find some Firmware, but they are as 5001.img - but official instructions for use is bad ( was good for you? sa me how to pls)
SK:nejakým spôsobom som moj odpalil a nepomaha ani recovery.(trochu som sa hral a nemal som zalohu)
EN: I damaged original fimware(ROM), and recovery is not functional (I have no backup)
SKrípadne ak sa niekto hral s firmware a má nejaký funkčný inštalovateľný z SD a pod.....
EN: If someone has good firmware(ROM) fully functional, instalable from SD an so on. send me please.
SK:Možno by mi pomohol jednoduchý príkaz cez terminál
EN: Maybe will help command from terminal
Code:
ht tps:// docs .google. com/file/d/0BxgPttaVjg4gdklzN0tINlRCZWs/edit?usp=sharing
SK: a poslat mi komplet čo vypísal
EN: send me please what it show
Code:
dmesg
SK: Neni treba root.
EN: Root is not needed
SK: Ak chete root :
EN: If you want root:
Code:
ht tps:// docs. google. com/file/d/0BxgPttaVjg4gdl83TFdCb0h4WWc/edit?usp=sharing
SK: Ak ho máte rootnutý tak skusiť
EN: If you have it rooted please try
ROM DUMP
Code:
htt ps:// docs. google. com/file/d/0BxgPttaVjg4gVV9nLUNnWmtDMVk/edit?usp=sharing
SK: a poslať mi vzniknutý priečinok.
EN: and send me created output folder
SK: A teraz dôvod prečo to potrebujem
Vadil mi na tablete gtalk tak som ho zmazal a spôsobilo to že už som na nom nenaštartoval system.
tak som hladal nejaku možnosť preinštalovania nakolko mi ani recovery nepomohol.
Vyskúšal som tieto Firmware alebo ROm či jak to nazvať
EN: Why i need it?
I delete Gtalk and android crashed
I try those Firmawares(ROMs) :
Code:
ht tps:// docs. google. com/file/d/0BxgPttaVjg4gSnBsNjBScnZ5X0k/edit?usp=sharing
https://docs. google. com/file/d/0BxgPttaVjg4gZEdjTjJYQUJTT1k/edit?usp=sharing
SK:systém nabehol
dokonca aj android jelly bean
ale nefunguje dotykovka... nejak zlý ovládač alebo zle zdetekovanie.
EN: System is going, (jelly bean too) , BUT touch screen is not functional, bad driver or bad detected.
SK:Z mojho dmesg je zjavne že dotykovka proste nenabehne.. preto by možno stačil aj dmesg výpis a skúsil by som nastaviť tu inštalačku ROm tak aby nainštaloval správny ovládač.. ale neviem sa pohnúť. ak je niekto viac znalý v problematike tak prosím help.
moj dmesg vypíše:
EN: From my dmesg we see that touch screen has problems. Is there someone who can help what to do? maybe edit tryed ROMs will help.
My dmesg:
<1>[ 5.492059] wmt.sd2.param = 0:0
<1>[ 5.495873] Default wmt.sd3.param = 0:0
<1>[ 5.500390] do not have set uboot enviroment: wmt.init.rc
<7>[ 5.505914] Registered led device: lcd-backlight
<6>[ 5.510061] usbcore: registered new interface driver usbhid
<6>[ 5.515545] usbhid: USB HID core driver
<6>[ 5.520424] log enable:FF, setting:FF
<6>[ 5.524161] logger: created 256K log 'log_main'
<6>[ 5.528718] logger: created 256K log 'log_events'
<6>[ 5.533440] logger: created 64K log 'log_radio'
<6>[ 5.538052] GPS: mt3326_gps_power: Switching GPS device on
<6>[ 5.543461] GPS: mt3326_gps_power: ignore power control: 1
<6>[ 5.548913] GPS: mt3326_gps_probe: Registering chardev
<6>[ 5.554118] GPS: mt3326_gps_probe: major: 246, minor: 0
<6>[ 5.559465] GPS: mt3326_gps_probe: Done
<6>[ 5.563251] BTHWCTL: alloc bthwctl: 245:0
<6>[ 5.567733] BTHWCTL: Bluetooth hardware control driver initialized
<6>[ 5.574718] usbcore: registered new interface driver snd-usb-audio
<6>[ 5.588430] WMT_SOC: dai_name=i2s, codec_name=vt1603
<4>[ 5.596553] wmt_pdm_init: pcm_clk_src=73500
<4>[ 5.596559]
<6>[ 5.602926] VT1602: vt1602 string not found
<6>[ 5.607548] wmt.audio.i2s = vt1603:0
<6>[ 5.615507] WMT_SOC: create WMT-HWDEP 0 success
<6>[ 5.619993] mount_thread
<6>[ 5.625106] asoc: VT1603 <-> wmt-i2s.0 mapping ok
<4>[ 5.690401] buf_area = ffde0000, buf_addr = 32810000buf_area = ffd3c000, b
uf_addr = 32814000
<6>[ 5.698569] asoc: HWDAC <-> wmt-pdm.0 mapping ok
<6>[ 5.705486] ALSA device list:
<6>[ 5.708381] #0: WMT_SOC
<4>[ 5.711731] default disable oprofile
<6>[ 5.715477] nf_conntrack version 0.5.0 (12987 buckets, 51948 max)
<6>[ 5.723649] NF_TPROXY: Transparent proxy support initialized, version 4.1.
0
<6>[ 5.730528] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 5.737621] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.742955] TCP cubic registered
<6>[ 5.746714] NET: Registered protocol family 10
<6>[ 5.751925] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.757353] IPv6 over IPv4 tunneling driver
<6>[ 5.761834] NET: Registered protocol family 17
<6>[ 5.766607] NET: Registered protocol family 15
<6>[ 5.771622] Bluetooth: RFCOMM TTY layer initialized
<6>[ 5.778068] Bluetooth: RFCOMM socket layer initialized
<6>[ 5.783324] Bluetooth: RFCOMM ver 1.11
<6>[ 5.786987] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 5.792273] Bluetooth: BNEP filters: protocol multicast
<6>[ 5.797472] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 5.805831] L2TP core driver, V2.0
<6>[ 5.809370] PPPoL2TP kernel driver, V2.0
<6>[ 5.813204] L2TP IP encapsulation support (L2TPv3)
<6>[ 5.818205] L2TP netlink interface
<6>[ 5.821558] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 5.828702] L2TP debugfs support
<6>[ 5.832419] lib80211: common routines for IEEE802.11 drivers
<7>[ 5.838542] lib80211_crypt: registered algorithm 'NULL'
<6>[ 5.838552] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t 9 rev 3
<6>[ 5.847145] ThumbEE CPU extension supported.
<5>[ 5.851866] Registering SWP/SWPB emulation handler
<6>[ 5.858031] input: kpadPower as /devices/virtual/input/input0
<4>[ 5.865118] [wmt_pm_init] id = 0x0, act = 0x1, bitmap = 0x6, ctl = 0xfe110
042, oc = 0xfe110082, od = 0xfe1100c2
<4>[ 5.875889] [wmt_pm_init] var define var_wake_en=1 var_wake_param=408001
<4>[ 5.882677] [wmt_pm_init] battery_used = 3
<6>[ 5.887464] PMC: WonderMedia Power Management driver
<4>[ 5.892537] PMC: Power button is configured as soft power
<4>[ 5.898238] [wmt_pm_init] power_on = 100 resume = 100 power_up = 100
<6>[ 5.905367] Can not find uboot env wmt.misc.param
<4>[ 5.910110] SD0 Host Clock 382812Hz
<6>[ 5.914246] Mali DRM initialize, driver name: mali_drm, version 2.1
<6>[ 5.920710] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
<4>[ 5.927980] Vt1609 touchscreen driver disabled.
<6>[ 5.934359] wmt-rtc wmt-rtc.0: setting system clock to 2013-03-06 13:51:31
UTC (1362577891)
<6>[ 5.943968] Freeing init memory: 180K
<4>[ 5.951254] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oo
m_score_adj instead.
<6>[ 6.043877] yaffs: dev is 32505866 name is "mtdblock10" rw
<6>[ 6.049288] yaffs: passed flags ""
<7>[ 6.052655] yaffs: yaffs: Attempting MTD mount of 31.10,"mtdblock10"
<7>[ 6.120439] yaffs: yaffs_read_super: is_checkpointed 1
<6>[ 6.120743] yaffs: dev is 32505868 name is "mtdblock12" rw
<6>[ 6.126153] yaffs: passed flags ""
<7>[ 6.129521] yaffs: yaffs: Attempting MTD mount of 31.12,"mtdblock12"
<7>[ 6.213933] yaffs: block 191 is bad
<7>[ 6.763771] yaffs: yaffs_read_super: is_checkpointed 0
<6>[ 6.763954] yaffs: dev is 32505867 name is "mtdblock11" rw
<6>[ 6.769369] yaffs: passed flags ""
<7>[ 6.772737] yaffs: yaffs: Attempting MTD mount of 31.11,"mtdblock11"
<7>[ 6.776632] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 6.801544] Uncor Ecc Err 0_th, on page 0x13828 fail., cur_try_time=-1
<4>[ 6.809506] Uncor Ecc Err 1_th, on page 0x13828 fail., cur_try_time=0
<4>[ 6.817395] read retry PASS cur_try_times=1
<4>[ 6.825528] Uncor Ecc Err 0_th, on page 0x13827 fail., cur_try_time=1
<4>[ 6.833413] read retry PASS cur_try_times=2
<4>[ 6.841893] Uncor Ecc Err 0_th, on page 0x1382a fail., cur_try_time=2
<4>[ 6.849840] Uncor Ecc Err 1_th, on page 0x1382a fail., cur_try_time=3
<4>[ 6.856956] read retry PASS cur_try_times=4
<4>[ 6.890837] UMP: UMP device driver loaded
<4>[ 6.934001] Mali: Mali device driver loaded
<6>[ 7.075362] [wmt-vd] WonderMedia HW decoder driver inited
<6>[ 7.084773] [wmt-lock] init ok, major=242, minor=1
<6>[ 7.097948] [wmt-vd] jdec Request IRQ 64 Ok.
<6>[ 7.102145] [wmt-vd] jdec registered major 236 minor 1
<6>[ 7.111142] [wmt-vd] mpeg2 registered major 236 minor 2
<6>[ 7.120189] [wmt-vd] mpeg4 registered major 236 minor 3
<6>[ 7.129287] [wmt-vd] divx registered major 236 minor 4
<6>[ 7.138294] [wmt-vd] h263 registered major 236 minor 8
<6>[ 7.167623] [wmt-vd] h264 registered major 236 minor 5
<6>[ 7.175695] [wmt-vd] vc1 registered major 236 minor 7
<6>[ 7.183105] [wmt-vd] rv registered major 236 minor 6
<6>[ 7.206193] [wmt-vd] vpx Request IRQ 88 Ok.
<6>[ 7.210310] [wmt-vd] vpx registered major 236 minor 9
<7>[ 7.221249] [wmt-ve] videoencoder_init: create video encoder proc
<4>[ 7.221261] start register videoencoder_driver
<4>[ 7.225967] *****NOW start videoencoder probe function!!*****
<6>[ 7.231852] [wmt-ve] veinfo.prdt_virt =0xffd00000,veinfo.prdt_phys =0x32a6
0000
<6>[ 7.238998] [wmt-ve] prob /dev/wmt-ve major 236, minor 0, prdt ffd00000/32
a60000, size 100 KB
<4>[ 7.247486] register videoencoder_driver done
<6>[ 7.251805] [wmt-ve] WonderMedia HW encoder driver inited
<6>[ 7.264022] [wmt-ve] encoder->irq_num = 87,encoder->isr = 0xbf0a62a8
<6>[ 7.270413] [wmt-ve] wmt-h264enc Request IRQ 87 Ok.
<6>[ 7.275237] [wmt-ve] wmt-h264enc registered major 236 minor 18
<4>[ 7.318073] wmt_vid_i2c_probe()
<3>[ 7.325354] WonderMedia CMOS camera register OK
<4>[ 7.657136] Uncor Ecc Err 0_th, on page 0x27ff0 fail., cur_try_time=4
<4>[ 7.665092] read retry PASS cur_try_times=5
<4>[ 7.689184] Uncor Ecc Err 0_th, on page 0x27fee fail., cur_try_time=5
<4>[ 7.697484] Uncor Ecc Err 1_th, on page 0x27fee fail., cur_try_time=6
<4>[ 7.705109] read retry PASS cur_try_times=-1
<3>[ 7.717347] init: try to config ril modem type...
<3>[ 7.721823] init: ril is not enable...Uncor Ecc Err 0_th, on page 0x2573c
fail., cur_try_time=-1
<4>[ 7.769700] Uncor Ecc Err 1_th, on page 0x2573c fail., cur_try_time=0
<4>[ 7.777596] read retry PASS cur_try_times=1
<3>[ 7.989003] init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
<3>[ 8.233007] init: cannot find '/system/etc/init.sh', disabling 'system_ini
t'
<3>[ 8.350094] android_usb: already disabled
<6>[ 8.354709] adb_bind_config
<6>[ 8.357444] usb_ep_autoconfig try to find ep1in-bulk
<6>[ 8.362447] usb_ep_autoconfig found ep1in-bulk
<6>[ 8.366953] usb_ep_autoconfig try to find ep2out-bulk
<6>[ 8.372070] usb_ep_autoconfig found ep2out-bulk
<6>[ 8.376846] udc: gri wmt_pullup()
<6>[ 8.380088] udc: gri pullup_enable()
<6>[ 8.385135] warning: `adbd' uses 32-bit capabilities (legacy support in us
e)
<6>[ 8.392382] adb_open
<6>[ 8.555107] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 8.638176] android_usb gadget: high speed config #1: android
<6>[ 8.643884] rndis ooooo 24
<6>[ 8.646556] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 8.906307] rndis xxxxx 24
<6>[ 9.350776] usbcore: registered new interface driver cdc_acm
<6>[ 9.356380] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
<6>[ 9.469677] USB Serial support registered for GSM modem (1-port)
<6>[ 9.475907] usbcore: registered new interface driver option
<6>[ 9.481418] option: v0.7.2:USB Driver for GSM modems
<1>[ 9.535094] [is_mc32x0]: Find mc3230(mCube g-sensor).
<6>[ 9.542536] input: g-sensor as /devices/virtual/input/input1
<4>[ 9.567353] offser gain = 482 474 418 528 256 688======================
<4>[ 9.567361]
<4>[ 9.567364] ft5406-touch reslx=600, resly=1024, Interrupt GP1, bit1, Rese
t GP0, bit4
<6>[ 9.768922] input: ft5406-touch as /devices/virtual/input/input2
<4>[ 9.793322] ERR:ft5x0x_i2c_rxdata_67:msg i2c read error: -5
<4>[ 9.798824] ERR:ft5x0x_read_data_157:read_data i2c_rxdata failed: -5
<1>[ 9.986959] [dump_kpad_devinfo]: =========================================
==========
<1>[ 9.994639] [dump_kpad_devinfo]: kpad id:baseboard devnum:1
<1>[ 10.000172] [dump_kpad_devinfo]: dev[0] type:rc_1
<1>[ 10.005104] [dump_kpad_devinfo]:
<1>[ 10.008390] [dump_kpad_devinfo]: key number:5
<1>[ 10.012810] [dump_kpad_devinfo]: key0:9e(158),
<1>[ 10.017152] [dump_kpad_devinfo]: key1:8b(139),
<1>[ 10.021655] [dump_kpad_devinfo]: key2:73(115),
<1>[ 10.026157] [dump_kpad_devinfo]: key3:72(114),
<1>[ 10.030666] [dump_kpad_devinfo]: key4:66(102),
<1>[ 10.035167] [dump_kpad_devinfo]:
<1>[ 10.038638] [dump_kpad_devinfo]: longkey num:0
<1>[ 10.043142] [dump_kpad_devinfo]: =========================================
==========
<6>[ 10.053519] input: keypad as /devices/virtual/input/input3
<4>[ 10.430673] fan GEIO_STOP_LOGO
<6>[ 10.433659] [Boot Animation] animation_stop
<4>[ 10.776949] [VPP] rx user pid 0x55
<4>[ 12.439302] mc_write:3--0
<4>[ 12.442012] mc_write:3--0
<4>[ 12.520929] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.527775] cmos_init_gc0308 2560 1936
<4>[ 12.626609] cmos_release()
<4>[ 12.629423] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.659689] cmos_init_yacd511 2560 1936
<4>[ 12.663553] cmos_release()
<6>[ 12.932817] [INFO] VPU Firmware Version =>
<6>[ 12.932823] product : | version : 0002.0000.00000008
<6>[ 12.932829]
<6>[ 12.947243] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 12.954723] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 13.060117] mc_write:3--5
<6>[ 13.064871] [INFO] VPU Firmware Version =>
<6>[ 13.064877] product : | version : 0002.0000.00000008
<6>[ 13.064883]
<6>[ 13.079297] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 13.086704] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 22.439434] Uncor Ecc Err 0_th, on page 0x2567e fail., cur_try_time=1
<4>[ 22.447430] Uncor Ecc Err 1_th, on page 0x2567e fail., cur_try_time=2
<4>[ 22.455322] read retry PASS cur_try_times=3
<1>[ 33.393832] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<4>[ 33.399504] skip adjust backlight at the first time
<4>[ 33.404539] mc_write:1--0
<6>[ 33.419512] request_suspend_state: wakeup (3->0) at 33849036002 (2013-03-0
6 13:51:58.986161334 UTC)
<1>[ 33.430339] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 154
<4>[ 33.440196] mc_write:1--60
<6>[ 34.008832] acc_open
<6>[ 34.011157] acc_release
<4>[ 34.303820] Uncor Ecc Err 0_th, on page 0x25800 fail., cur_try_time=3
<4>[ 34.310838] read retry PASS cur_try_times=4
<4>[ 40.754027] mc_write:3--0
<3>[ 40.778421] binder: release proc 162, transaction 90, not freed
<3>[ 40.784294] binder: release proc 162, transaction 5047, not freed
<6>[ 40.884850] yaffs: dev is 32505869 name is "mtdblock13" rw
<6>[ 40.890290] yaffs: passed flags ""
<7>[ 40.893639] yaffs: yaffs: Attempting MTD mount of 31.13,"mtdblock13"
<7>[ 41.008158] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 44.126783] Uncor Ecc Err 0_th, on page 0x27fbc fail., cur_try_time=4
<4>[ 44.275513] read retry PASS cur_try_times=5
<4>[ 44.493885] Uncor Ecc Err 0_th, on page 0x27fbe fail., cur_try_time=5
<4>[ 44.524878] Uncor Ecc Err 1_th, on page 0x27fbe fail., cur_try_time=6
<4>[ 44.533376] read retry PASS cur_try_times=-1
<4>[ 46.592229] Uncor Ecc Err 0_th, on page 0x43944 fail., cur_try_time=-1
<4>[ 46.610250] Uncor Ecc Err 1_th, on page 0x43944 fail., cur_try_time=0
<4>[ 46.630067] read retry PASS cur_try_times=1
<4>[ 46.910741] Uncor Ecc Err 0_th, on page 0x43946 fail., cur_try_time=1
<4>[ 46.918700] Uncor Ecc Err 1_th, on page 0x43946 fail., cur_try_time=2
<4>[ 46.926723] read retry PASS cur_try_times=3
<4>[ 48.368608] Uncor Ecc Err 0_th, on page 0x25900 fail., cur_try_time=3
<4>[ 48.376529] read retry PASS cur_try_times=4
<4>[ 333.801387] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=4
<4>[ 333.809262] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=5
<4>[ 333.817127] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=6
<4>[ 333.824996] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=-1
<4>[ 333.832908] read retry PASS cur_try_times=0
<4>[ 333.840808] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=0
<4>[ 333.848720] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=1
<4>[ 333.856625] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=2
<4>[ 333.864500] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=3
<4>[ 333.871615] read retry PASS cur_try_times=4
<1>[ 633.830513] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 150
<4>[ 633.836406] mc_write:1--58
<1>[ 633.846984] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 147
<4>[ 633.852891] mc_write:1--57
<1>[ 633.866863] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 144
<4>[ 633.872757] mc_write:1--56
<1>[ 633.886870] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 141
<4>[ 633.894230] mc_write:1--55
<1>[ 633.903615] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 138
<4>[ 633.909819] mc_write:1--54
<1>[ 633.920203] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 135
<4>[ 633.926096] mc_write:1--52
<1>[ 633.936835] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 132
<4>[ 633.942719] mc_write:1--51
<1>[ 633.953646] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 129
<4>[ 633.959562] mc_write:1--50
<1>[ 633.970201] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 126
<4>[ 633.976094] mc_write:1--49
<1>[ 633.986882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 123
<4>[ 633.992769] mc_write:1--48
<1>[ 634.006991] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 120
<4>[ 634.013487] mc_write:1--47
<1>[ 634.026882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 117
<4>[ 634.032772] mc_write:1--45
<1>[ 634.046842] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 114
<4>[ 634.054196] mc_write:1--44
<1>[ 634.063611] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 111
<4>[ 634.069806] mc_write:1--43
<1>[ 634.080537] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 108
<4>[ 634.086431] mc_write:1--42
<1>[ 634.096848] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 105
<4>[ 634.102729] mc_write:1--41
<1>[ 634.113656] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 102
<4>[ 634.119662] mc_write:1--40
<1>[ 634.130198] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 100
<4>[ 634.136083] mc_write:1--39
<1>[ 641.271927] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<1>[ 641.277631] [lcd_brightness]lcd turn off <--
<4>[ 641.283652] mc_write:1--0
<6>[ 641.292736] request_suspend_state: sleep (0->3) at 641722369336 (2013-03-0
6 14:02:06.859382668 UTC)
<4>[ 641.405636] -------------> do auto suspend
<3>[ 2132.167123] init: untracked pid 1061 exited
[email protected]:/ $
Click to expand...
Click to collapse
SK:dikes
ENG:thank you
ROM
SK:
Dnes som nasiel origo ROM
Ale nepodarilo sa mi to nahodit ani podla instrukcii
ENG: Today I find original shipped ROM. But, I have problem with upgrade it by the instructions.
Anyone knowns how to make jelly bean working?
Any one?..