Ok so, I'm bumped and this morning my screen cracked, and became unresponsive to touch, but was acting as if I was making selections. (as in Pandora started playing on its own because I had the widget on my homescreen and I couldn't get it to stop without a battery pull). I have insurance on the phone so I can get a replacement, but its on backorder.
Now before I send it in for a replacement, I'm wondering if anyone has any ideas as to how to remove the bumped TWRP, and go back to stock recovery, without a touchscreen lol. I can't even unlock my phone on my own...sometimes it will do it itself, but that's only if I'm lucky :/ I think right now as it is, I'm stuck. But I'd really like to send it back without it being bumped, in case of voided warranty purposes and me not getting a phone, or even worse, them finding the method to achieve the bumped unlock, and then them end up patching it!!
What do you guys think? Any ideas or feedback would be greatly appreciated! Thank you!
You're going to have to try and do this blind, but how about tot city to reflash everything to stock?
Here's a link: http://forum.xda-developers.com/verizon-lg-g3/development/tot-vs985-10b-share-t2832488
There are instructions on how to go into download mode on the flash tool by using your volume & power key. The flash tool will probably tell you when/if you have a connection. Just make sure you have the lg drivers installed and you should be able to flash the tot file and get your phone back to stock. Good luck
startswithPendswithOOH said:
You're going to have to try and do this blind, but how about tot city to reflash everything to stock?
Here's a link: http://forum.xda-developers.com/verizon-lg-g3/development/tot-vs985-10b-share-t2832488
There are instructions on how to go into download mode on the flash tool by using your volume & power key. The flash tool will probably tell you when/if you have a connection. Just make sure you have the lg drivers installed and you should be able to flash the tot file and get your phone back to stock. Good luck
Click to expand...
Click to collapse
Thank you so much for that suggestion! I'll be sure to give that a shot in a bit and see how it goes! No screen selections will have to be made in the process, other than signing in once its up and running, correct?
Yes. It should just flash once you get it connected and hit a button on the flash tool.
Take a look at this link as well just in case the other link doesn't help. It has good visuals to help you out some more:
http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html
FYI- at step 2, hold your vol up button for @ 5 sec and then plug in your USB - it should vibrate when it connects... I believe. Doing it blind sucks but I'm sure you'll get it.
startswithPendswithOOH said:
Yes. It should just flash once you get it connected and hit a button on the flash tool.
Take a look at this link as well just in case the other link doesn't help. It has good visuals to help you out some more:
http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html
FYI- at step 2, hold your vol up button for @ 5 sec and then plug in your USB - it should vibrate when it connects... I believe. Doing it blind sucks but I'm sure you'll get it.
Click to expand...
Click to collapse
Man thanks again for that suggestion!!! I knew about it but figured since I had an unresponsive screen, that I wouldn't be able to complete the process and because I've never had to reset this particular phone before, I just wasn't 100% sure it would work. Thankfully to your suggestion it did and is now sitting on the starting screen. Just what I needed.:good::good::highfive::victory:
nlysurferdude03 said:
Ok so, I'm bumped and this morning my screen cracked, and became unresponsive to touch, but was acting as if I was making selections. (as in Pandora started playing on its own because I had the widget on my homescreen and I couldn't get it to stop without a battery pull). I have insurance on the phone so I can get a replacement, but its on backorder.
Now before I send it in for a replacement, I'm wondering if anyone has any ideas as to how to remove the bumped TWRP, and go back to stock recovery, without a touchscreen lol. I can't even unlock my phone on my own...sometimes it will do it itself, but that's only if I'm lucky :/ I think right now as it is, I'm stuck. But I'd really like to send it back without it being bumped, in case of voided warranty purposes and me not getting a phone, or even worse, them finding the method to achieve the bumped unlock, and then them end up patching it!!
What do you guys think? Any ideas or feedback would be greatly appreciated! Thank you!
Click to expand...
Click to collapse
If you have insurance then your G3 being bump'd should not make a bit of difference. I have returned several unlocked and rooted phones to Asurion with no problem. You're paying for insurance mainly for physical damage. Your screen is obviously cracked and damaged due to that so there should be no worries. Also, if your insurance provider wanted to try and figure out how the Bump method works they could easily get their own G3 and Bump it. Having your Bump'd phone is not going to give them any more of an inside look into Bump than if they got their own device and did what everyone else has done.
acparker18 said:
If you have insurance then your G3 being bump'd should not make a bit of difference. I have returned several unlocked and rooted phones to Asurion with no problem. You're paying for insurance mainly for physical damage. Your screen is obviously cracked and damaged due to that so there should be no worries. Also, if your insurance provider wanted to try and figure out how the Bump method works they could easily get their own G3 and Bump it. Having your Bump'd phone is not going to give them any more of an inside look into Bump than if they got their own device and did what everyone else has done.
Click to expand...
Click to collapse
Ahhh thank you for that bit of info that would have been great to know earlier (for my own sanity's sake lol) but at the very least, I have wiped all my data clean which I would have preferred to do anyways before sending it back
I've returned 3 Samsung captivate phones to att that still had Cyanogenmod or MIUI on them, same with the 7 or 8 Samsung Galaxy S 3 phones I brought back on my insurance plan with Best Buy Mobile. They request it be stock, but if the screens broke they can't check it until the screen is fixed, at which point they will just flash it anyway.
Sent from my VS985 4G using XDA Free mobile app
Doesn't the insurance cover it, if it's lost or stolen? Sounds to me like you lost it.
It's good to know that they accept devices with 3rd party/modified software. I was never sure if the insurance companies did or not. If you send it to a factory service center they'll tell you your warranty is void for sure. Its all about finding a way to charge you $.
But I do think it's wise to wipe your device if you can. I used to do phone repairs for a large anonymous Korean company and I've seen a lot of amateur porn, credit card info, social security #'s and other personal info that really shouldn't be out there. People forget what is on their phones a lot of the time. Definitely take the time to wipe your device before you send it somewhere. Its ok to be a little paranoid sometimes
Related
The problem: I flashed a radio to my device that is (obviously) incompatible with my device (if you really want the details, its embarassing, but I'll post if necessary). My phone freezes on bootup, and never initializes the Radio/ROM (and for good reason).
This is what happens now: If my phone is off, I can turn it on, but I only get the first boot up screen, and the red numbers in the bottom right-hand corner never appear. At that point, I cannot turn off my phone without taking out the battery. If I take out the battery and put it back in, and attach the phone to a charger (or USB cable), the light on the phone will "breathe", as if its charging. However, if I then disconnect the phone, the light will CONTINUE breathing.
I also cannot turn on the phone while its connected to either the charger or USB cable.
My phone is Hard-SPL'ed and Security Unlocked. But the real issue I'm having is that I can't get into Bootloader to flash something else. Apparently, I've corrupted the Bootloader. When I turn the phone on, and press the reset button while holding Vol-down, the phone just goes black.
I might be okay getting a warranty exchange if not for this: I can still hard reset my phone. It doesn't make any sense to me, but when I turn it on, I can do the soft-reset-button, Vol-down, Action button combo, and my phone flashes through Bootloader to give the the hard reset menu. It flashes that screen just long enough to see that my phone has 1.90Olinex as the SPL. So, I think I may be screwed, unless someone here can help.
My wife is very . . . upset . . . about this, and is worried that we'll have to spend money because of my continuous "tinkering" with my phone.
Any help anyone can offer is greatly appreciated.
I know this is my own stupid fault, and I should've known better, but it would be nice to get confirmation from the experts here that I'm just going to have to chalk one up in the "L" column at this point.
Q
Have you tried to flash from the SD card?
Hi Captain_Throwback,
Try copying Raph Radio 1.11.25.01 to the root of a FAT32 SD Card ... you'll need to rename the .NBH to RAPHIMG.NBH.
Pull the SIM out of the phone and power it back on as per usual; I've noticed that the phone "blacks out" for a bit but then switches to flash mode.
Good luck.
PS: suggest getting the large carry-on with the wheels for the guilt trip - heaven knows it's come in handy for me
That's a bummer, man. You gotta at least 'fess up part of the story to prevent someone else from falling into the same trap (however unlikely that may be). And maybe, just maybe, it will help someone else figure out how to fix your problem.
What radio did you try and flash.
Hopefully it wasn't the new Rhodium radio? Or a Rose radio?
I have done this a few times on my tilt, all I did was put it into the boot loader, it worked from hard reset screen as well, and flashed the rom via activesync. I am assuming that you are not able to get a sync, or have you tried yet? I know my fize will also sync [to flash] from bootloadr.
Captain_Throwback said:
The problem: I flashed a radio to my device that is (obviously) incompatible with my device (if you really want the details, its embarassing, but I'll post if necessary). My phone freezes on bootup, and never initializes the Radio/ROM (and for good reason).
This is what happens now: If my phone is off, I can turn it on, but I only get the first boot up screen, and the red numbers in the bottom right-hand corner never appear. At that point, I cannot turn off my phone without taking out the battery. If I take out the battery and put it back in, and attach the phone to a charger (or USB cable), the light on the phone will "breathe", as if its charging. However, if I then disconnect the phone, the light will CONTINUE breathing.
I also cannot turn on the phone while its connected to either the charger or USB cable.
My phone is Hard-SPL'ed and Security Unlocked. But the real issue I'm having is that I can't get into Bootloader to flash something else. Apparently, I've corrupted the Bootloader. When I turn the phone on, and press the reset button while holding Vol-down, the phone just goes black.
I might be okay getting a warranty exchange if not for this: I can still hard reset my phone. It doesn't make any sense to me, but when I turn it on, I can do the soft-reset-button, Vol-down, Action button combo, and my phone flashes through Bootloader to give the the hard reset menu. It flashes that screen just long enough to see that my phone has 1.90Olinex as the SPL. So, I think I may be screwed, unless someone here can help.
My wife is very . . . upset . . . about this, and is worried that we'll have to spend money because of my continuous "tinkering" with my phone.
Any help anyone can offer is greatly appreciated.
I know this is my own stupid fault, and I should've known better, but it would be nice to get confirmation from the experts here that I'm just going to have to chalk one up in the "L" column at this point.
Click to expand...
Click to collapse
Damn I'm sorry to hear about your issue and i feel for ya because I did some stupid **** myself a lil' while back if you remember. Your advice to reflash the oem rom worked for me 100%. Have you tried hard resetting and then trying to get into bootloader mode?
AllTheWay said:
What radio did you try and flash.
Hopefully it wasn't the new Rhodium radio? Or a Rose radio?
Click to expand...
Click to collapse
Ok, I'll tell you . . . it wasn't a Rose radio (I know P1Tater bricked his phone that way) . . . but I figured, the Rhodium, its got the same hardware, right? I mean, T-Mobile is a GSM carrier . . . If I patch it for Raph, it may work . . . even though the radio number is so much different . . . I should still be able to get into Bootloader if it doesn't work, because I'm HardSPL'ed . . .
But no. I can't get into Bootloader. Believe me, I've tried. Every time I try, the phone just goes black. And I have a nice stock AT&T ROM on my Storage Card ready to flash, if only I could get it onto the phone.
I tried plugging into the computer, but it won't recognize the phone at all.
I wish it was REALLY bricked, but the fact that I can still hard reset it is very disappointing.
Captain_Throwback said:
Ok, I'll tell you . . . it wasn't a Rose radio (I know P1Tater bricked his phone that way) . . . but I figured, the Rhodium, its got the same hardware, right? I mean, T-Mobile is a GSM carrier . . . If I patch it for Raph, it may work . . . even though the radio number is so much different . . . I should still be able to get into Bootloader if it doesn't work, because I'm HardSPL'ed . . .
But no. I can't get into Bootloader. Believe me, I've tried. Every time I try, the phone just goes black. And I have a nice stock AT&T ROM on my Storage Card ready to flash, if only I could get it onto the phone.
I tried plugging into the computer, but it won't recognize the phone at all.
I wish it was REALLY bricked, but the fact that I can still hard reset it is very disappointing.
Click to expand...
Click to collapse
This happened to me (sort of.) I flashed a diamond radio to my fuze... without security unlocking it first. Symptom wise, Exact same thing happened. I was able to (after days of tinkering) get it into bootloader from the hard reset screen. I just kept pressing the Hard rest sequence over and over while connected to USB. I noticed, one time, I got the USB at the bottom. Don't know how, don't know why, it just happened, I was then able to flash the Stock Cing ROM. Wierd stuff, But lucky. Hope you get it back on board. Is it insured? Because it would really suck if someone stole your bricked fuze.
Intertrochanterica said:
This happened to me (sort of.) I flashed a diamond radio to my fuze... without security unlocking it first. Symptom wise, Exact same thing happened. I was able to (after days of tinkering) get it into bootloader from the hard reset screen. I just kept pressing the Hard rest sequence over and over while connected to USB. I noticed, one time, I got the USB at the bottom. Don't know how, don't know why, it just happened, I was then able to flash the Stock Cing ROM. Wierd stuff, But lucky. Hope you get it back on board. Is it insured? Because it would really suck if someone stole your bricked fuze.
Click to expand...
Click to collapse
It is insured, and paying $125 is better than having to buy a brand new phone, but if I can avoid spending money, my wife would be much happier .
I can hard reset just fine . . . if only the phone would stay on the bootloader screen when doing that . . . but it doesn't. I assume the bootloader has been corrupted, which is why the phone blacks out when trying to enter bootloader mode. I'll keep trying, I guess. I can't make it any worse. Actually, if I could, I'd be better off, so that way they can't find out my phone is Hard-SPL'ed.
Captain_Throwback said:
I can hard reset just fine . . . if only the phone would stay on the bootloader screen when doing that . . . but it doesn't. I assume the bootloader has been corrupted, which is why the phone blacks out when trying to enter bootloader mode. I'll keep trying, I guess. I can't make it any worse. Actually, if I could, I'd be better off, so that way they can't find out my phone is Hard-SPL'ed.
Click to expand...
Click to collapse
Try plugging it into a car battery, or something like that, and fry the sucker. That's my only piece of advice.
Captain_Throwback said:
I can't make it any worse. Actually, if I could, I'd be better off, so that way they can't find out my phone is Hard-SPL'ed.
Click to expand...
Click to collapse
You could make it worse if you get the white sticker wet and make it turn pink, but that would be very bad for you.
You are at the point to where you cant move beyond your current predicament in wither way. Im afraid I see no other alternative than to pay the $125.
Maybe you could sell your Fuze on Ebay for 125 to cover your insurance cost and you could make a notation on the Ebay site saying something like 'PARTIALLY USED FUZE' like that Carfax commercial does.
update
My phone is still bricked, but I'm taking it to a repair shop after work, where I'll find out whether I'll be getting a free warranty replacement, or paying $125 for an insurance replacement. At least I've been able to successfully determine that a Rhodium radio cannot be flashed to a Raphael. So no one else has to try it .
Keep us updated dude. Also, if you slip the guy $50 he may do the free warranty replacement for you... it might save you $75 and you wont have to use up one of your insurance claims.
Captain_Throwback said:
My phone is still bricked, but I'm taking it to a repair shop after work, where I'll find out whether I'll be getting a free warranty replacement, or paying $125 for an insurance replacement. At least I've been able to successfully determine that a Rhodium radio cannot be flashed to a Raphael. So no one else has to try it .
Click to expand...
Click to collapse
Crap, sorry to hear that. HAAH, just walk into the ATT store and say," I tried turning the phone on and this is what happened." And that you have never heard of XDA forums, roms, and though a radio was only for people in trucks or that wear camo.
iceman4357 said:
Crap, sorry to hear that. HAAH, just walk into the ATT store and say," I tried turning the phone on and this is what happened." And that you have never heard of XDA forums, roms, and though a radio was only for people in trucks or that wear camo.
Click to expand...
Click to collapse
That might work, if I hadn't bought the phone from my best friend, who just happens to manage an AT&T store. He actually knows that I had a custom ROM on my phone, and called ahead to the repair shop to let them know I was coming, and he said hopefully they won't notice the SPL in my bootloader if they try and hard reset it. So it is possible they'll just give the phone a cursory look to make sure its really not working, and then go ahead with a warranty replacement. I'll be sure to let everyone know what happens. In the meantime, the word of the day is "dumbass", LOL.
Farmer Ted said:
Try plugging it into a car battery, or something like that, and fry the sucker. That's my only piece of advice.
Click to expand...
Click to collapse
That's what I would do.
Captain_Throwback said:
My phone is still bricked, but I'm taking it to a repair shop after work, where I'll find out whether I'll be getting a free warranty replacement, or paying $125 for an insurance replacement. At least I've been able to successfully determine that a Rhodium radio cannot be flashed to a Raphael. So no one else has to try it .
Click to expand...
Click to collapse
Honestly I would not take it to the repair shop.
Here is what I would do. Call the warranty replacement department at AT&T. 1-800-801-1101. Tell them that you woke up and now your phone won't turn on. Once you go through all the steps they have to do to fix it, then they will ship you a replacement Fuze right away. The refurbished Fuze will have everything except for a battery and a back cover. Typically when I did this I received a new one the next day that I called.
Now take your battery out of your phone and your SIM card and microSD card. Put your phone in the microwave for 2 seconds. Walla. Now it's bricked and AT&T will have no way to tell if you have HardSPL or a cooked ROM on your phone. Trust me. It will work.
When you get your new phone just send the phone back in packing material that they provide to you and you won't have to spend any money to get a new phone or spend money to fix a phone.
Just do what I told you about. I promise it will work. Just trust me. I've done it before and it worked like a charm. No worries. Trust me, I'm not trying to lead you down the wrong path. I'm trying to get you a replacement just like I got when I bricked my last fuze trying out different radios. And use the phone number that AllTheWay posted just above me once you do what I told you.
P1Tater said:
Just do what I told you about. I promise it will work. Just trust me. I've done it before and it worked like a charm. No worries. Trust me, I'm not trying to lead you down the wrong path. I'm trying to get you a replacement just like I got when I bricked my last fuze trying out different radios. And use the phone number that AllTheWay posted just above me once you do what I told you.
Click to expand...
Click to collapse
I'm curious what it is you told him, in case i'm in a similar position at any point !!
Lemme kno please here or PM is cool!
Thx
JFlitt
AllTheWay said:
That's what I would do.
Honestly I would not take it to the repair shop.
Here is what I would do. Call the warranty replacement department at AT&T. 1-800-801-1101. Tell them that you woke up and now your phone won't turn on. Once you go through all the steps they have to do to fix it, then they will ship you a replacement Fuze right away. The refurbished Fuze will have everything except for a battery and a back cover. Typically when I did this I received a new one the next day that I called.
Now take your battery out of your phone and your SIM card and microSD card. Put your phone in the microwave for 2 seconds. Walla. Now it's bricked and AT&T will have no way to tell if you have HardSPL or a cooked ROM on your phone. Trust me. It will work.
When you get your new phone just send the phone back in packing material that they provide to you and you won't have to spend any money to get a new phone or spend money to fix a phone.
Click to expand...
Click to collapse
Agree with this. If your friend works at the store and knows what you have done, I wouldnt go there. Call the number, fry the damn phone and get a new one. We need you back on your feet to help solve ROM issues my friend.
My dad's Optimus T supposedly can't boot up after he took out the battery and the device has been never rooted or anything(stock). I can't take a look at the phone to see whats wrong, but I'm preparing for the worst and want to know how to flash stock rom with kdz to maybe get it back up and running. I found the KDZ file and I am wondering what else I would need besides that? I've never done this before and looking for advice. Also, my parents never bought warranty so do you think TMO will replace it because it was never rooted and it also has the dust problem. So would they replace it since it is defective product, but then again it's been a few months since we bought it.
Thanks.
Feeshie said:
My dad's Optimus T supposedly can't boot up after he took out the battery and the device has been never rooted or anything(stock). I can't take a look at the phone to see whats wrong, but I'm preparing for the worst and want to know how to flash stock rom with kdz to maybe get it back up and running. I found the KDZ file and I am wondering what else I would need besides that? I've never done this before and looking for advice. Also, my parents never bought warranty so do you think TMO will replace it because it was never rooted and it also has the dust problem. So would they replace it since it is defective product, but then again it's been a few months since we bought it.
Thanks.
Click to expand...
Click to collapse
well to be frankily honest with you, get yourself a job and start buying your own phones so that you can get warranties and insurance on your phone's also yes check with TMO about replacing the phone, no sense in using a utility like KDZ if you know nothing about it, I cant help you with KDZ, ive never had to use it and never will, but Im pretty sure there are tons of threads that can point you in the right direction
Jrhodes85 said:
well to be frankily honest with you, get yourself a job and start buying your own phones so that you can get warranties and insurance on your phone's also yes check with TMO about replacing the phone, no sense in using a utility like KDZ if you know nothing about it, I cant help you with KDZ, ive never had to use it and never will, but Im pretty sure there are tons of threads that can point you in the right direction
Click to expand...
Click to collapse
It wasn't my decision to buy warranty or not and this isn't my phone. I'm using KDZ as a last resort so I'm not 100% set on it. Going to see what TMO can do first, but I don't have any hopes that they will do anything.
Feeshie said:
It wasn't my decision to buy warranty or not and this isn't my phone. I'm using KDZ as a last resort so I'm not 100% set on it. Going to see what TMO can do first, but I don't have any hopes that they will do anything.
Click to expand...
Click to collapse
well good luck to you on that, if you need any help, let me know and Ill try to get some info for you on w/e you need, keep me updated as to how KDZ works for you, I have no need for it but Im to damn lazy to actually do the research for a tool I wont use, the only problem I had was one phone I "accidently" semi-bricked, but was under warranty so I got it replaced and now my second phone is rooted, customed recovery and CM7 rom on it
If you haven't had a chance to take a look at the phone yet, then maybe you can start with that and trying something simple like taking out the battery, putting it back in, connecting the charger, and trying to turn on the phone? Then you can see what's going on. Maybe you'll want to try holding Power + Vol. down + Home to go into recovery from a turned off state. Keep in mind that stock recovery immediately begins its restore which (I think - custom recoveries spoil us) wipes user content.
Jrhodes85 said:
well good luck to you on that, if you need any help, let me know and Ill try to get some info for you on w/e you need, keep me updated as to how KDZ works for you, I have no need for it but Im to damn lazy to actually do the research for a tool I wont use, the only problem I had was one phone I "accidently" semi-bricked, but was under warranty so I got it replaced and now my second phone is rooted, customed recovery and CM7 rom on it
Click to expand...
Click to collapse
Well, it's strange how it happened because this phone is completely stock and my dad or I never did anything to change anything to it. I really don't think it would get bricked just by removing the battery out.. I'll just have to wait until he gets back with the phone.
UPDATE: All phones have a 1 year warranty if something wrong with the phone so TMO took the phone in and sending a new one on the way.
Wait, so did you get a chance to look at it, or did someone else take it to TMO?
maip said:
Wait, so did you get a chance to look at it, or did someone else take it to TMO?
Click to expand...
Click to collapse
I tried to turn it on and it stays stuck at LG logo with the 4 buttons blinking. My dad took it to T-Mobile and gave him a replacement
Sent from my LG-P500 using XDA App
Hi,
I read and followed lots of excellent threads on here and successfully rooted my S2. I then flashed it with the Revolution ROM which worked fine, later tried the VK + Siyah which also ran fine.
Today I decided to try WajkIUI but after flashing and rebooting, the phone reset, the button lights came on and then it hung. Now I can't get a thing out of it, no booting, no recovery mode and no sign of it in ODIN.
It sounds completely hard-bricked but I don't really understand how it can be.
Any ideas?
Have tried soft and hard resetting but nothing.
Cheers
Without recovery mode your last best (remote) chance before you send it to Samsung would be a jig.
That's what I was thinking but why would it hard brick if the flash had worked?
And if I send if back to Samsung the warranty will be void anyway won't it?
Unfortunately that one's like asking how long a piece of string is (in other words, who knows ?). If it's a case of the NAND being stuffed as a result of the flash, a JTAG repair may fix it, but you won't know that until/unless you send it to a JTAG repairer.
It may be a hardware issue, cpu might have carked it or something.
Yeah, you've pretty much voided the warranty by putting non-stock firmware on it, but at the end of the day if Samsung can't tell it's been messed with you might get away with a warranty repair/replacement.
You'll only know that if you send it in to them to be looked at. So I guess you've got two choices to consider (not including the remote chance of the jig getting you into download mode).
I guess you could try another battery. Always the possibility it might have died.
Crap. Well, I'll give a jig a go and if that doesn't work then send it back and see what happens.
@ op
did you tried the key press combination to get into download mode? the things you have done has a very less possibility of hard brick.
That's what I thought, but no combination seems to work.
Was the battery full when you flashed?
Sent from my GT-I9100 using Tapatalk
Think it was about 96%.
You never know, it might just be a completely knackered battery. If you're planning on getting it fixed come what may, spending 20 bucks or whatever they cost in your country on another battery won't be the waste of money you might initially think.
If it doesn't fix this problem, at least you'll have a 2nd battery when you do get it fixed. I know I've found having a 2nd battery a godsend since I got mine a month ago, has come in really handy on trips where I've been away for more than a day and has meant I haven't had to worry bout bringing a charger along.
Could a battery just die like that? Seems a bit of coincidence.
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
mraquinn said:
Could a battery just die like that? Seems a bit of coincidence.
Click to expand...
Click to collapse
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
MistahBungle said:
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
Click to expand...
Click to collapse
On that note....if I wanted to upgrade to ICS, how would that be done without rooting - ie. would the counter look the same? (Long shot)
Yeah if you're going to get it fixed, chances are you'll end up flashing/rooting it again, so the jig will come in handy.
I guess that's something you'll need to decide when you get it back/get a new one. What happened to you isn't the norm tho. The large majority of flashes go smoothly for most people. But the reality is, every time you do it, you do run that small risk of it barfing for any number of a gazillion reasons (which are normally impossible to discover once it's happened). That's the risk people like us who frequent sites like this take.
Yeah if they/Samsung can't tell what happened to it, you'll possibly get away with it. And the fact you rooted it isn't information you have to volunteer to them by any means As to exactly what you should tell them, that's up to you.
Edit to add - Let us know how you get on once you have it sorted. Always useful to have people's experiences on here to give other people it happens to some kind of idea of how it might go down.
mraquinn said:
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
Click to expand...
Click to collapse
Well, according to the boffins online I have to go into a store to see if they can repair it. Hopefully they won't be able to check whether it's been rooted or not instore. In fact, if they can't power it on, I don't see how they could.
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
mraquinn said:
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
Click to expand...
Click to collapse
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Is that a bit of a flaw, for circumstances just like this?
And, does this mean that the USB jig has no chance of working - or is that the exact reason it might work?
JJEgan said:
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Click to expand...
Click to collapse
i thing jig can solve the problem
Hi
I recently bought a broken Galaxy S2 with a non-working display/screen off a swiss auction portal (smiliar to eBay) for very little money.
The seller stated that the display broke after he dropped it, the rest of the phone should be fine. Effectively, only the LCD is broken, the glass is intact, but the screen doesn't show anything when I try to turn on the phone.
The first few times I tried to turn on the phone, nothing happened, no boot sound or touch buttons glowing. After trying several combinations of pressing buttons (hard reset, soft reset, download mode, recovery etc.) I heard the boot sound and saw the buttons glowing, but only once and I dont know how I exactly managed it to start. But, nevertheless, I can't really see what the phone is doing, if it is booting, if its in download mode, etc.
Does anyone have an idea, what I can/should do to make sure, the phone itself is working and its only the display which is broken? I just don't want to spend over $100 for a new display, if im not sure if the rest works...any suggestions?
Thanks very much for your help guys!
Greetings from Switzerland!
nkb88
How can anyone answer if the phone is going to be worth the cost of a new screen.It could be water damaged or blacklisted,or faulty.
Did you not foresee these things.What did you expect to happen.You must have trusted the seller,but all of a sudden you have doubts.Why didnt the seller replace the screen.
You probably think youve scored,when in fact it could work out more expensive than buying a working phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
How can anyone answer if the phone is going to be worth the cost of a new screen.It could be water damaged or blacklisted,or faulty.
Did you not foresee these things.What did you expect to happen.You must have trusted the seller,but all of a sudden you have doubts.Why didnt the seller replace the screen.
You probably think youve scored,when in fact it could work out more expensive than buying a working phone.
Click to expand...
Click to collapse
First of all, the mentioned auction platform is very small and not quite comparable to eBay, maybe it was my fault to make the comparison to eBay. Its much smaller, only people from Switzerland and people much trustworthier than on eBay. I talked to the seller even before I commited my bid on the phone, and he told me he already bought another one and the place, where he first wanted to repair it, told him, it would be more than $200, which wasnt an option for him...
The phone was very cheap, only about $25 - due to the fact that the sellar put it in a wrong category (mobile accessoires but not mobile devices itself) so almost nobody beside me bidded for the auction. There are several other Galaxy S2s with broken displays for sale, which sell at least for $50-70, rather between $100-150.
So to put it straight: I just bid for the phone because its cheap and, if the display is replaced and the phone is fully working again, the potential selling price is much higher than what I payed for the phone and the display together.
Now, I was just wondering, if there is a possibility to tell, if the phone boots normally and to be sure that the display is the only faulty part...
If you know what network it's on, and you can find a way to get it switched on, you can put a compatible sim card into it and call it....if the phone rings (provided the volume is set right) you can assume it's good.........
That is.....assuming there's charge in the battery.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Ok I see now.
All you need to do then is to relist the phone on that auction site you said....in the proper area/listing....and you could make a profit without risk.
You could put it in dl mode and see if it is ready to take a flash.Or see if someone could hook up a screen to test,or see if you can borrow one/get sale or return.
And people on here help with tech problems,not get rich quick schemes......LOL
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Ok I see now.
All you need to do then is to relist the phone on that auction site you said....in the proper area/listing....and you could make a profit without risk.
You could put it in dl mode and see if it is ready to take a flash.Or see if someone could hook up a screen to test,or see if you can borrow one/get sale or return.
And people on here help with tech problems,not get rich quick schemes......LOL
Click to expand...
Click to collapse
Actually I could have bought the phone and relisted it in the proper category, you are right on that BUT I acually don't have any interest in making money with this phone, if it is fully working again, I probably will give it to my GF cause her crappy iFone will probalby be moving to the bin soon... You really probably missunderstood me in this case...
But thanks for you help! I'll see this evening if I can put it in download mode...
keithross39 said:
If you know what network it's on, and you can find a way to get it switched on, you can put a compatible sim card into it and call it....if the phone rings (provided the volume is set right) you can assume it's good.........
That is.....assuming there's charge in the battery.......
Click to expand...
Click to collapse
Thats also a good idea BUT afaik you need to enter a PIN code before the phone actually connects to the carrier/provider, isn't that correct?
Not necessarily......unless the phone has been set up that way post purchase.....as I said, you need to know what carrier the phone was with before, and simply go and get a sim card (pay as you go) for that carrier and put it in the phone....job done.
It's not necessary to enter a pin code here in the UK.....I don't know how the mobile operators operare with respect to that in Switzerland though......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
How about if you cant "borrow' a screen,just buy one off eBay from a seller that takes it back with a small restocking fee.
Then hook it up(without fixing it permanently) and see if any problems me/keith mentioned.
Look near the end of this video in this thread.
http://forum.xda-developers.com/showthread.php?p=25438587
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Okay, i managed to connect the phone to my computer and it shows up in KIES! *yay*
Unfortunately, KIES shows: "The connected device is locked..."
But, as far as this looks like, the phone is working! Am I right on this?
I dont know much about kies as I dont use it.Maybe its not an unbranded phone and youve put in a different sim its not used to.
Unless someone has a better idea,I think buying the screen under the conditions I said earlier is the way to go.It may only lose you £15 at the worst.
Check the online imei checket first though to see if it throws amything up.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
I dont know much about kies as I dont use it.Maybe its not an unbranded phone and youve put in a different sim its not used to.
Unless someone has a better idea,I think buying the screen under the conditions I said earlier is the way to go.It may only lose you £15 at the worst.
Check the online imei checket first though to see if it throws amything up.
Click to expand...
Click to collapse
I haven't put in a SIM at all, as it is not neccesary to be able to use the phone.
I will buy a screen anyway, if I can't use it myself, I will give it to a frend who has also got a smashed S2.
Another question: Is it possible to hard reset the phone, without a working screen? Afaik you have to boot into recovery and select the reset from a menu, which is not really possible without having a working display... Any suggestions?
Thanks!
Someone has just posted this utility.
http://forum.xda-developers.com/showthread.php?p=43448133
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Someone has just posted this utility.
http://forum.xda-developers.com/showthread.php?p=43448133
Click to expand...
Click to collapse
Thanks, but with the phone being locked, i cannot do anything, also not install any apps...
How can I reset the phone without the screen? Or can someone tell me which buttons to press in recovery menu to do a wipe/reset?
Thanks!
That in itself could cause you issues. You have to get the number of and order of presses exactly right otherwise you could end up formatting the system partition (os)
Aaaaand.....you don't know whether you're running 4.0.4 in which case, doing a wipe *may* permanently kill your phone (search emmc brickbug for the why/how)......
Realistically the only option is to obtain a screen......have you thought of taking the phone to an unofficial repairer, explaining the situation and asking for the temporary instore use of a screen? (You could even offer to pay a small fee.....just as a sweetener)
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
nkb88 said:
Thanks, but with the phone being locked, i cannot do anything, also not install any apps...
How can I reset the phone without the screen? Or can someone tell me which buttons to press in recovery menu to do a wipe/reset?
Thanks!
Click to expand...
Click to collapse
That mymobiler didnt look like an app to me.The other thing that was mentioned was an app that needed root.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
keithross39 said:
That in itself could cause you issues. You have to get the number of and order of presses exactly right otherwise you could end up formatting the system partition (os)
Aaaaand.....you don't know whether you're running 4.0.4 in which case, doing a wipe *may* permanently kill your phone (search emmc brickbug for the why/how)......
Realistically the only option is to obtain a screen......have you thought of taking the phone to an unofficial repairer, explaining the situation and asking for the temporary instore use of a screen? (You could even offer to pay a small fee.....just as a sweetener)
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
You are right - thats really too risky. As I said, i'm going to order a screen now and we'll see how things work out! Thanks for your help! I'll keep this thread updated with my progess.
Cheers! :good:
nkb88 said:
You are right - thats really too risky. As I said, i'm going to order a screen now and we'll see how things work out! Thanks for your help! I'll keep this thread updated with my progess.
Cheers! :good:
Click to expand...
Click to collapse
Got a new screen and everything is working smoothly!
Thanks for your support! :good:
PS: Any recommendable, FAST rom without too much bloatware?
Cheerio!
Lol....not gonna recommend a specific ROM as that's against XDAs rules......but if you want the stability of stock without the bloat, try one of the hybrid ROMs. Look for "samsung based" in the ROM sticky thread.....or do what I've done. ....stay with your stock firmware, but root it and debloat it.......
My Wife says I'm a phone geek.....
I'd have to agree.....
Pardon the pun but I have hit a brick wall with my LG e970. Last night I followed this guide to root and unlock the boot loader and everything appered to go fine. Today I recieved my code to do a sim unlock and, this is where everything sarted to go wrong. After entering the code the phone tried to do an automatic reboot and hung on the LG logo screen. After doing some research and getting the phone into download mode I tried to unbrick it using this guide. After I finished flashing it I tried to reboot and to my dismay nothing happened, I mean nothing. My phone no longer even turns on and when I try to boot into download mode I get a QHSUSB download prompt on my pc. Is my phone toast? Is there any last resort actions I can take? Can anyone tell me what exactly happened?
Thanks in advance for any information.
-dubrewski
following your links, your demise was the second guide you used. That guide is for the INTERNATIONAL VERSION of the optimus G, you have the AT&T variant, thus ending up with a nice brick(phones are completely different). Sorry to say but as far as i know there has been no progress on the QHSUSB mode front ( http://forum.xda-developers.com/showthread.php?t=2458139&page=2). Looks like JTAG is your only option right now, might as well google about it.
wow, I'm not quite sure how I feel right now. That's what I get for becoming frustrated and impatient. Should have gone to bed and dealt with it in the morning. What exactly is QHSUSB? Is there any chance this is something at&t would deal with? I would rather pay a repair few then have to buy a new phone.
Thanks
-dubrewski
dubrewski said:
wow, I'm not quite sure how I feel right now. That's what I get for becoming frustrated and impatient. Should have gone to bed and dealt with it in the morning. What exactly is QHSUSB? Is there any chance this is something at&t would deal with? I would rather pay a repair few then have to buy a new phone.
Thanks
-dubrewski
Click to expand...
Click to collapse
Don't really know much about QHSUSB, just enough to know that when you get it you are hard bricked. Wouldn't know if at&t would deal with it(if it is under warranty you might as well give it a shot), otherwise go for jtag.
dubrewski said:
wow, I'm not quite sure how I feel right now. That's what I get for becoming frustrated and impatient. Should have gone to bed and dealt with it in the morning. What exactly is QHSUSB? Is there any chance this is something at&t would deal with? I would rather pay a repair few then have to buy a new phone.
Thanks
-dubrewski
Click to expand...
Click to collapse
AT&T may try to charge full price if they decide warranty is void, or that could be just a myth. LG has a one year manufacturer warranty, I don't know their policy for covered repairs.
Link for JTAG service. http://mobiletechvideos.mybigcommerce.com/lg-optimus-g-jtag-brick-repair/