[Q&A] DuOS-M Discussion - Android Q&A, Help & Troubleshooting

Q&A for DuOS-M Discussion
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for DuOS-M Discussion. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

I've only tried the 32-bit beta on a Venue 8 Pro. Minus some graphical glitches in some places, it performs much better than any other Android virtualization software I've tried. However, it won't connect to the internet and there's no navbar (minus some button that opens recent apps at the bottom), which makes it extremely unusable. Besides that, it's amazing. If the later betas fix these issues then I'll buy the full version.

I tested DuOS 32-Bit on my Dell Venue 8 Pro recently. Here are my findings:
1.) I tried installing this on my Dell Venue 8 Pro tablet running Windows 8.1 32-bit edition but on run it says "Unknow Exception occured (-1027). Kindly contact support for help." I've tried running as an Administrator and removing/re-installing with no success. I submitted a bug report about this issue and several days later they responded with an updated version which fixed this issue for me.
2.) DuOS doens't run full screen on devices with less than 3GB of RAM, there's a work-around by editing the config.xml as described here (Note: running the DuOS Configuration Tool and saving changes will revert the full screen work-around) :
http://amiduos.com/support/knowledg...is-not-launching-in-full-screen-mode-on-my-pc
3.) The navigation bar was also just a black strip for me, I'm submitting a bug report about it now.
Two solution exists:
A.) Set the dpi to 120 via the DuOS configuration tool or by editing the config.xml.
B.) Use an app to provide on screen home/back/menu functions:
Virtual Button Bar (I tested using the trial version):
Trial: https://play.google.com/store/apps/details?id=opotech.virtualbuttonbartrial
Full Version: https://play.google.com/store/apps/details?id=opotech.virtualbuttonbar
Button Savior (I've only tested the root version):
Root Version: https://play.google.com/store/apps/details?id=com.smart.swkey
Non-Root Version: https://play.google.com/store/apps/details?id=com.smart.swkey.nonroot
4.) Internet access works fine for me but doesn't always auto connect. It's not intuitive but sometimes you have to go to settings within your Android virtual machine and in the WiFi portion manually connect to one of the listed networks.
5.) My Dell Venue 8 Pro 32GB has limited disk space free and DuOS seems to refuse to start if I have less than 1GB disk space free, another frustration is that DuOS seems to create massive log files in "C:\ProgramData\AMI\DuOS\DuOS\Logs" (512MB worth when I last checked). Deleting these log files seems to have no ill effect.
6.) Doesn't seem to support Venue 8 Pro's built in accelerometer so I have to use DuOS's on screen rotate button to use apps/games in portrait mode.
7.) The camera app doesn't support Venue 8 Pro's built-in camera.
8.) DuOS tends to lockup/freeze when waking up the Venue 8 Pro from sleep (via the power button).

Copy & Paste
How do you copy information form the PC (host) to android (DuOS-M) like a word file?

Anggelos said:
How do you copy information form the PC (host) to android (DuOS-M) like a word file?
Click to expand...
Click to collapse
You can simply use copy paste for copying text from windows to android(DuOS-m).
For word(or other documents) files use shared folders, it will allow you to access word file from android.

Copy paste in DuOS-M
Anggelos said:
How do you copy information form the PC (host) to android (DuOS-M) like a word file?
Click to expand...
Click to collapse
1)Just copy the text in Windows
2)Give a long press ,where you want to paste it.
3)it will a give a Paste Option ,paste it.

Does anyone know how to insert files into DuOS?
Like bluestacks?
Thanks.

Are you trying to load apks or just share files?
Sent from my A0001 using Tapatalk

aaron5015 said:
Does anyone know how to insert files into DuOS?
Like bluestacks?
Thanks.
Click to expand...
Click to collapse
go to setting\devices\duos configuration tool under Duos and you can select the folders that will be shared between duos and windows.... just put any files onto those folders and it will be available under both OS. you can put apks there and install manually under Duos...

I installed this on a Voyo Winpad A1 Mini (Chinese Tablet, similar to a Dell Venue Pro 8). Installed without problems and GAPPS also works. I haven't tested Other features like the cameras but the Touchscreen responds smoothly and I could install application without problems.
By default it will launch on a Window but you can enable the Full screen mode in the configuration tool and works correctly.

chrome can install ,but once opened, it closes immediately
same with photoshop express
vsco cam is not compatible. installing apk says "App not installed". Trick using Market App Helper, it says "Missing shared library" when installing.
My No.1 required app is vsco cam, how unfortunate

huge bummer
My FX 8350 can't handle it apparently...

windows 8.1 nextbook tablet 2in1
Hi my name is chris & I have a new win8.1 nextbook tab & wanted to be able to dual boot android software on it from a sdcard or flashdrive but can't figure out how to do it this software also comes with secure boot on it but i cant figure out if theres away to shut it off its even possible & I tried to download the duos m android software everytime I do it says its not enough space to do so but I still have 11 gigs of space left on the tablet & it runs off 1 gig of ram but I modded it so that its quicker… sorry for all the questions but do you have any ideas that will help me I tried looking up tutorial & things like that on booting from sdcard or usb but its to not be any info on how to do so & when im on boot screen my usb doesnt show up

here are shortcuts to keys

I tried run as admin / login Administrator account, but both of them got the same problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OS: Windows 8.1 Pro (x64) with Update and all hotfix.

no it is imposible dude you have to buy a graphic card

I have an ASUS TF300T tablet that ran regular Android for about 1 1/2 yrs then I rooted and reflashed with cyanogen..
Currently I am on my HP Spectre x2 which folds into a tablet. Works pretty good that way.
I loaded AMIDuOS lollypop yesterday and found it runs as good as my ASUS - so far..
Only problem I'm having is loading Play Store.
Haven't tried the HP in tablet form running DuOS yet- - but will soon.....

i'm having issues with this emulator.
the DuoVMHeadless.exe process is dying all the time, thus Duo-M isn't able to work at all.
can anyone help??
AMD PhenommII 965 BE
8GB OCZ Ram
Asus Crosshair V Formula
Nvidia 285 GTX
---------- Post added at 04:43 PM ---------- Previous post was at 04:43 PM ----------
Windows 7 64Bit

Amiduos not support for AMD cpu :crying:

Anyone tried installing Xposed on lollipop version of AmiDuos?

Related

[DEV] PSXPeria 2.0 for Sony Tablet

I've posted here: http://forum.xda-developers.com/showthread.php?t=1365680 but I feel like I can get some more Tablet S audience here.
To summarize what this tool does, it basically extracts the emulator data from Crash Bandicoot, patches it, and allows you to load any PSX game that you rip to run on your device.
Check the link above for more information and download links.
Here's my request to you tablet users:
First of all, I need people to test this as I do not own a Sony Tablet. More importantly, I need different APKs from people. Currently, the only APK of crash bandicoot I have for the Tablet S is one with a CRC32 checksum of 6c7c966b (NCEA00344.apk). If you have a version that has a different checksum (I'm looking for the US version especially), please PM me with a copy of it. I need to manually patch each version of the game to support it with the tool.
Again, I do not own a Tablet, so development will not be as fast as it is for the Play. Therefore, it is up to beta testers like you to help me get it working. If anything goes wrong, I need psxperia.log found in the folder you extracted the files to and android's logcat if you can get it. It would also be nice if a developer for this device can take care of supporting it. Or, if anyone's feeling generous, get me a tablet (I can also look into unlocking it, I have a couple of ideas), but I know that's asking too much.
I just got one today. How can I help?
I pledge $30 to get you the tablet. Don't even have time to convert images for your new beta as i still have them working on my previous version on xperia play with the older firmware but admire your dedication to keeping this project alive. I can donate this money straight away if you want - i just hope you get the tablet soon.
Sent from my Sony Tablet S using Tapatalk
I have HK version of Tablet S, but I do not know how to extract the apk from it as there is no root for Tablet. Please advise. Thanks.
I've Medievil and Destruction Derbi from store in a Sony Tablet S, where i can find that files?
When i try to install a game converted with this software i get an error from table ("Not installed"), maybe is Android version (Android 3.2.1).
i didnt think of ttrying the psxperia on my tablet, i will get on this today, and let you know what i find! since im still waiting for FedEX to deliver my Xperia Play.
EDIT: got the .apk for you. Mine is NCUA94900, not sure about the check sum, but im about to pm you about it.
I'd be happy to test things out as I'm keen to try Driver 2 ISO which I'd found - excuse my ignorance, but without ROOT, how is it possible for me to obtain the Crash Bandicoot APK file and I assume it is "NCUC80631_T1_1_01.zpak" required from the Android/Data...... folder
Thanks.
SWFlyerUK said:
I'd be happy to test things out as I'm keen to try Driver 2 ISO which I'd found - excuse my ignorance, but without ROOT, how is it possible for me to obtain the Crash Bandicoot APK file and I assume it is "NCUC80631_T1_1_01.zpak" required from the Android/Data...... folder
Thanks.
Click to expand...
Click to collapse
There are a few different ways to do it. Without root, I used Astro to browse up to the root and then I could freely browse the system partitions (you just cant write to it). You could always try ADB as well, if you've got that working..
And I've just sent through my APK from my Tablet S. Thanks!
Just created my first APK with PSXPeria 1.0 as 2.0 doesn't work with me and there is no error log showing - the APK doesn't work, it installs but bounces back to the homescreen, the data files are in the correct places.
With 2.0, it just hangs at "Checking files...."
Any ideas please?
Just had some kind help from a forum member, the APK compiles when using the Xperia APK, but doesn't install on my Sony Tablet. Using the CrashBandicoot APK from the Sony Tablet, produces an error in the JAVA program.
I assume the develop is no-longer monitoring this thread, rendering my feedback and determination to run my PS1 games useless
SWFlyerUK said:
Just had some kind help from a forum member, the APK compiles when using the Xperia APK, but doesn't install on my Sony Tablet. Using the CrashBandicoot APK from the Sony Tablet, produces an error in the JAVA program.
I assume the develop is no-longer monitoring this thread, rendering my feedback and determination to run my PS1 games useless
Click to expand...
Click to collapse
Have you tried FPSE? almost flawless IMO
its paid but more than worth it
When trying to extract in PSXPeria it says "CAN NOT EXTRACT APK! JAVA SAYS CAN NOT FIND CONFIG FOR THIS APK CRC32: D1EEDC9F". Can anyone help me out on this? Can somebody also upload their APK file of Crash for me too? Thanks.
SWFlyerUK said:
Just had some kind help from a forum member, the APK compiles when using the Xperia APK, but doesn't install on my Sony Tablet. Using the CrashBandicoot APK from the Sony Tablet, produces an error in the JAVA program.
I assume the develop is no-longer monitoring this thread, rendering my feedback and determination to run my PS1 games useless
Click to expand...
Click to collapse
Could you post the errors log to the thread he has on the xperia play forum - I wonder if compiling using data from the other games from ps store would work - I had no time or know how to update my xperia play to 2.3.4 yet so staying on psxperia version 1 (on 2.3.3 experia play) for now which is not compatible with tablet s. Thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://visionkore.net/images/errorscreen.jpg
error message posted in image above
That error in the above post means the dev hasn't included the patch for that particular APK in this version of PSXPeria. Try PM'ing the OP with a link to a copy of your apk and ask if he might be able to include it in the next release. It's all detailed in the first post of this thread. Read there.
If we keep adding APK's we might get better results across all the Tablets
Anyone know if this works? I tried to install an apk I made for my Xperia play onto the Sony tablet S. I installed it the exact same way, where I tossed the folder into Android/data/, and had the apk in the root. It wouldn't even let me install lol.
I'm guessing i'd have to rip the current Crash, and the data, and then see what I could do. I was hoping someone may have already tried this.
What would be truly legendary is if one of the emulators made managed to emulate multiplayer somehow. The only one I can see being possible in the short term is a gameboy link cable emulation via bluetooth or wifi.
Otherwise for the likes of PSX games, potentially something where a device syncs like a bluetooth controller to a "host" device. Then the host device would broadcast whats on screen to the other device and go from there (perhaps in split screen cutting the image down the middle and scretch to fit screen what remains, so you only see your player ) Pretty sure we'd have to wait for quadcore or better devices for that though haha
Alright an update on what I was testing. I got the exact same error that Cypherwolf got. I even tried to rename the apk and zpak. The oddest part is the fact that the folder of the zpak is labeled NCUA94900_T. Where as my xperia play phone has the zpak as just NCUA94900.
Though again renaming didn't seem to do jack. Not sure if its an issue with the software conversion or this "T" version of the zpak is somehow encrypted. I'll see if I can use the 1.0 version of the software and if there's any diff.
Need DEV Help
So after playing with the files from my Tablet S and messing around inside PSXperiaTool.jar with WinRAR, I added my own CRC32 to the \resources\patches. After studying the layouts of the files in the other patch folders and help from yifanlu's GitHub page, I put together a seemingly working config.xml, filelist.txt and stringReplacements.txt. I then used the game-patch.bin & libjava-activity.so.jbpatch from GitHub for the last two patch files.
Now when I run the extract on my NCUA94900.apk, I don't get any errors at all. However, I have run into a problem. When I click Convert in the convert section, the words "Checking to make sure all files are there." appear, but nothing happens.
I've tried using versions 1 and 2 of the program and both just hang there. I've also tried editing the config.xml to not patch the libjava-activity_NCUA94900_T_1.so file in \lib\armeabi, but I still have the problem.
Anyone else working on this and have gotten as far or farther?
Nope I haven't even been able to extract tnhe zpak properly it says that its not recognized. If I ignore that and continue it has the same error as above. I did find something in system/app zpackdownloader.apk, not sure what that entitles. I have a feeling that when installing something from say xperia play, something like an apk prevents it from being installed.

Viewpad 7" VB734

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.1mid.net/?p=1083
I just got myself a Viewpad VB734 from China, but strangely this model is not found anyway on the Viewsonic Official Website.
The price is about USD110.
It have a Cortex-A8 RK2918 CPU @ 1GHz, 512MB DDR3 Ram, 7" screen with 5 point touch panel. running on gingerbread with honeycomb interface. surprisingly smooth playing 3d games. but certain games is not supported.
wondering any idea how to root it? it this have the same rooting procedure as 7e or 7x?
Thanks.
Looks like a clone - no real Viewpad...
ok, i found the official website
http://www.viewmate.com.cn/2011VB734/
it is from Viewmate, the ViewSonic company in China.
And this product is officialy claim that it will be support Android 4.0.
wondering when it will have ICS.
chchia, have you tried any roms on this yet? I just saw a shop here with a Viewsonic VB734 and VB734Pro.
Please let me know if you find a site that has upgraded ice cream sandwich roms. I've got this viewpad97a tablet for my children it works great but I would really like to upgrade the rom. I think I'm the only 1 on the entire in that bought this model there's not any information for it anywhere.
Sent from my ViewPad97a using XDA App
If it's running gingerbread (2.3) then you can root vie SuperOneClick or ''Gingerbreak'' as I did on my VIEWPAD 7
AntiNSA said:
Please let me know if you find a site that has upgraded ice cream sandwich roms. I've got this viewpad97a tablet for my children it works great but I would really like to upgrade the rom. I think I'm the only 1 on the entire in that bought this model there's not any information for it anywhere.
Sent from my ViewPad97a using XDA App
Click to expand...
Click to collapse
Viewpad97a is definitely not the same tablet of this thread!
Well, I made some search and VB means ViewBook. It can be updated by pc using a software you can download from their site:
http://www.viewmate.com.cn/index.php?c=list&cs=download-center&
The software needs to install on your pc some drivers for Fuzhuo Rockchip (RK29 device), then you can update or restore using Rockchip batch tool (and using google translate for the install notes included)
Now I can just restore with the update.img provided in the cd coming with the tablet.
I was able to root this tablet with SuperOneClick over the original Gingerbread... Is there nobody that can tell us how to install CWM and ICS rom?
Maybe this tablet has other model number (and manifacturer) outside China?
I'm trying to write down in chinese :-o to Viewsonic to know when they're going to release the promised ICS version...
ICS for VB734Pro ect.
I'm testing the official version coming from the manifacturer*.
As soon as I get some result, I'll keep you posted.
*They have beta versions for all products from ViewMate aka Viewsonic
ICS for VB734Pro
I'm testing, since my last post here, the official beta version for Viewmate (viewsonic) VB734Pro.
Nice one, is working fine with some little setback:
- first, you can't root this: connecting it to my pc with windows, there's no way to see the tablet as an android device. It's just a linux hard drive on my device manager. So, debug mode doesn't work at all;
- second, using the usb connection makes the tablet a little unstable and, after you disconnect, you can see a message saying SDcard damaged, It's not true, but it's just necessary to reboot the VB734Pro;
- booting takes time, about two minutes...
- some app won't install from Google Play (ie. Chrome) and Google Books won't update because of signature conflict (there's a 2.2.1 version as system app!).
Finding a way to root it should give me the chance to reduce booting time, but also to correct Google Books conflict, use any app that needs rooting and... make complete backups with titanium if necessary.
VB734Pro with ICS and rooted!!!
Thanks to picchiopc and his blog I was able to root this tablet using a pc with Linux Ubuntu 12.04 installed.
I wasn't able to see the tablet using Windows 7: maybe because both Linux and Android share the same code from Unix I had the chance to implement the adb service otherwise not usable with Windows.
The procedure is quite complex: first you need to install correctly AndroidSDK, second you need to properly connect the device using 2207 as [VENDOR ID] and 0000 as [PRODUCT ID], third you need to create the file adb_usb.ini inside the directory .android in your root. This file must contain just "0x2207" without quotes as text inside it.
Then use this script to root your tablet VB734Pro with ICS installed.
FYI: Mediacom 840I and Viewsonic VB734Pro have the same motherboard, processor, etc.
BE CAREFUL: connecting the tablet to your pc with Windows can create instability to the VB734Pro, mainly because the internal sd card is unreadable (and inaccessible) to the pc. So expect the screen of your tablet start scrambling a lot when you attempt to connect to your pc via usb cable.
One workaround is to turn off your tablet, unmount your external sd card and then connect it directly to the pc using an adapter or card reader, or try to use Airdroid on the same wifi network.
UPDATE: The only good reason to root this tablet is to use Root Uninstaller, Clean Master and also Root Explorer: I was able to clean up some unnecessary apps and take a look to Google Now, that is not working fine... in this tablet.
I don't recommend the use of any sd booster, like Sd Increase or Sd-booster: it doesn't make any difference at all.
I don't recommend the use of Link2sd: it simply doubles the time when you turn on the tablet!
ViewSonic VB737
tanx dude,, i have bought a viewsonic VB737 just a moment ago.. but i couldnt find anything that related to this tablet as u - with searching anywhere about viewsonic vp tablets!!
do u think that this model that i have is same as ur model? i mean can i root my tablet just as u or what? appriciate ur concerning
O have rooted my ViewPad 7e whit GingerBreak app. Maybe it works in your tablet.
This is the one I used GingerBreak-v1.20.apk. Search whit Google.
Sent from my ViewPad7e using xda app-developers app
tanx dude
but that was not my answer
amir2pa said:
tanx dude,, i have bought a viewsonic VB737 just a moment ago.. but i couldnt find anything that related to this tablet as u - with searching anywhere about viewsonic vp tablets!!
do u think that this model that i have is same as ur model? i mean can i root my tablet just as u or what? appriciate ur concerning
Click to expand...
Click to collapse
I don't think so. VB737 is different from VB734PRO.
After some search, I found that VB734 has the same motherboard of that Mediacom model quoted before.
I suggest to see if you find analogies with another tablet: Viewsonic is a chinese brand, in other words they are assemblers, putting their brand on their products.
Still working, I'm amazed with this little, heavy, book and video viewer!
Definitely Videwpad tablets only give headaches. I bought one of the latest models and finding your Rom is a titanic task.

Android on tablet Trekstor Surftab Wintron 7.0

Hi everyone,
i have a Trekstor Surftab Wintron 7.0 which mounts an Intel Atom Z3735G and 1GB ram and runs Windows 10 Home 32bit. it works quite good for just 50€ that i spent to buy it, but i think that it can do more, specially because apps from the Microsoft Store are not so much, and using the tablet without the "tablet mode" is quite difficult because the screen is too small and buttons hard to press.
Standing at the specs I can see it has the same hardware of the Trekstor SurfTab xintron i 7.0, but it comes with Android on it.
What i want to do is to get the image of the internal flash of a Xintron and write it in my Wintron.
Thanks to xblax i have the following partitions img files in different files:
-boot
-bootloader
-fastboot
-oem
-recovery
-system
After many attemps i was able to boot the Ubuntu Live USB and using the DISK application, I formatted the disk according to the partition table always from xblax and i flashed the partitions IMG files.
Anyway now I am stuck because because the bootloadet.img seems to have a 64bit bootloader in it.
The Intel Atom Z3735G processor is 64bit, but I am pretty sure the UEFI is locked to boot only 32 bit systems.
any hint please?
Can anybody help me? I'm not a Linux expert, so I just want to know how to write an IMG partition taken from a device on another device (that is basically the same) and boot it.
I am pretty sure it could boot so i think i just need some basic info
Niddu85 said:
Nobody can help me? I don't am not a Linux expert, so I just want to know how to write an IMG partition taken from a device on another device (that is basically the same) and boot it.
I am pretty sure it can be booted so i think i just need to know some basic info
Click to expand...
Click to collapse
why didn't you buy the android version instead?
toma94 said:
why didn't you buy the android version instead?
Click to expand...
Click to collapse
i couldn't find it in Italy it seems to be available only in Germany, and my final objective is to have a dual boot Win10/Android
Have you tried Refind Boot manager?
Not yet, i'll give it a try and let you know
So, i tried the flashdrive IMG but in the boot menu I don't see any choice.
But after a few tries I found that if I rename the bootx64.efi file in bootia32.efi refind finds something
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but if I try to start it says
This may just be the solution:
http://www.xda-developers.com/remix-os-for-pc-exits-alpha-enters-beta-brings-exciting-news-with-it/
Yep!! I'm waiting for it!
Let's see if it will work!
Finally the Beta came, it looks great but... I am experiencing some hardware issues.
First of all the touchscreen. It works, but seems that it is not calibrated properly, making it impossible to use without a mouse. Than also the audio, Bluetooth, battery monitor and many other things are not working at all
I read that there should be the possibility to calibrate the touchscreen but I didn't find any solution...
Suggestions?
Hello Niddu,
I am also intersted in running android on the wintron 7.
Did yout get success in running the Xintron images on the Wintron, or have you got some other Solution?
Thanks and greetings from Germany.
Hi, unfortunately i had no clue because of my lack of knowledge in Linux.
Anyway I suggest you to spend some time on trying to make RemixOS Beta 32bit working.
I actually don't know how to compile a kernel, but if you can do it you can try to integrate the missing drivers.
With the official release the touch screen is working but is not calibrated properly and that's the main problem because without it you need to connect an external mouse/keyboard without the possibilty to keep the tablet in charge.
Anyway sound, bluetooth, battery management and power and volume keys are not working.
If somebody is able to make it work I'll be glad to help them!!
Now i had Success in running Android x86 4.4 on it.
The Touchscreen is working very well, but the three soft buttons for back home and recent are not working?
Bluetooth, adjust screen lightning and sound are not working
Great! Can you link the release are you using? If someone could explain how to add drivers to an existing android image that could be a good starting point!
I just tested the version that I guess you are using but I have the same result on the touch I had using remix OS.
I'll try to explain you better with images.
Keeping the tablet in portrait mode lets analyse first of all the Y axis.
Clicking on the upper part of the screen it results aligned on the 0 of the y axis.
But if I click in the lower part it not calibrated
Analysing the X, the left side of the screen is not really aligned
While on the right it is almost OK.
Last one is the "windows" key. When I press it, a touch is simulated on the screen in an area that is not covered by the touchscreen
Is there anyone able to guide me in the calibration of the screen?
Hello Niddu,
i used android-x86-4.4-r5 : ....android-x86.org/releases/releasenote-4-4-r5...
It themes that there are different Versions of the Tablet out there.
I have the ST70416-6 / Windows 10 Version.
When i start the Android Live image, the Calibration screen appeares automatically and after Calibration it workes like i saied befor.
I also have a ST70416-6 Win 10, but when i launch the live Image of the same version of your it does not ask me for touch calibration. Can you post me a picture of how this calibration is?
android on wintron 7.0
Hello guys, I also have a ST70416-6, trying to find a way to install android on it. Did u get lucky?
Thanks,
G.
Trekstor Wintron 7 touchscreen driver
Hello everybody,
I had success building a touchscreen driver for the ST70416-6 version. The driver that is used in Android x86 is the gsl-firmware: github.com/onitake/gsl-firmware
I used the original driver from Trekstor (SileadTouch.fw) to build a Linux driver using the firmware tool:
./unscramble SileadTouch.fw firmware.fw
./fwtool -c firmware.fw -m 1680 -w 900 -h 600 -t 5 -f track silead_ts.fw.
After that I pasted the silead_ts.fw in system/lib/firmware in Android x86 that i have installed on my sdcard. Now the Touchscreen works quite good.
The Android x86 version I used is the latest android-x86_64-6.0-rc1.iso.
Unfortunately sound, battery, camera and bluetooth are still not working. The sound chip seems to be a ALC5642 which is still not supported by Linux.
The gyrosensor is working but the axis are inverted so that it is unusable. Has anyone an idea how to swap the axis of the gyro.
Link to firmware: dropbox.com/s/bce8bc6zu3gc0g4/silead_ts.fw?dl=0
Unfortunately I´m not allowed to post a link because I´m a new member , so you have to paste a http www before the two links.
Hello, im back
Sry for the long time, i got my second son and many, many positive trouble with family and so on
Sry nidu for not sharing that screenshots.
I tried Merlins guide to build an own driver and it is working.... thank you very much
I tried it with Android x86 6.0 rc and maybe with a very slow usb drive touch is working but all react very slow, i will try it with android 4.4 and other usb drive tomorrow.

Virus / trojan / malware in the official Zopo Speed 7 / 7+ ROM from 2016-09-21

Some weeks ago, a virus appeared a second time on my Speed 7, which is not removable and at the end requires a full re-flash of the device.
Symptoms: every couple of hours two apps with the name "Settings" are getting installed. The virus scanner (I used "Sophos") detect the viruses which belong to the "Triada" class; I can remove them, but after a while they reappear again.
To find out if the malware comes from "outside" (for example by installing a malicious app) or is already pre-installed in the ROM I performed the following investigation:
1) Downloaded the latest ROM for Speed 7 (from 2016-09-21, MD5 sum 8dfa789e1e795f285b4c6a9a65433943) to a Linux PC
2) Unzipped the file, converted "system.img" to a raw image file (with simg2img)
3) mounted the raw image file
4) uploaded the file system/priv-app/System-UI/SystemUI.apk (MD5 sum 55169441bfb82af77f2187614e5d2c1c) to virustotal.com
13 of 59 virus scanners detect a problem:
AegisLab: Android.Troj.Ztorg!c
Arcabit: Android.Trojan.Ztorg.GC
BitDefender: Android.Trojan.Ztorg.GC
ClamAV: Java.Malware.Agent-6331114-0
Emsisoft: Android.Trojan.Ztorg.GC (B)
GData: Android.Trojan.Ztorg.GC
K7GW: Trojan ( 0001140e1 )
MAX: malware (ai score=81)
McAfee: Artemis!55169441BFB8
Qihoo-360: Trojan.Android.Gen
Sophos AV: Andr/Dropr-FY
TrendMicro-HouseCall: Suspicious_GEN.F47V1015
WhiteArmor: Malware.HighConfidence
Conclusion: the latest ROM image for the Speed 7 is infected by a virus / trojan that can not be removed from the system. The purpose of this virus is not obvious to me, but it installs other trojans of the "Triada" class (using the camouflage name "Settings"). In my opinion it is a very serious problem affecting the integrity of private user data and credentials. I also checked the latest ROM images of the Speed 7 plus and Speed 7C models, they are also infected.
Second investigation:
I rooted the phone and installed afwall+, hoping that the firewall will block downloading of additional virus components (beside the already installed system app SystemUI). The log file entries of afwall+ show that SystemUI tries to connect to two different servers, usually several times per minute:
First: 54.169.134.231:80 (name "ec2-54-169-134-231.ap-southeast-1.compute.amazonaws.com")
Since port 80 is HTTP protocol I opened the web page in a browser. It simply shows a page with one single word: "prabat". Maybe a password to access other malware???
Second: 221.130.182.169:80 (no nameserver entry)
Opening this address shows a page with chinese letters only and several links, which are always the same and point to an Android app named NanoLauncher.apk"
Downloading the APK and uploading it to virustotal.com shows that 10 of 62 scanners detect
a virus. Here is the list (only positives):
AegisLab: SUSPICIOUS
AVware: Trojan.AndroidOS.Generic.A
CAT-QuickHeal: Android.Cooee.Ee670 (PUP)
Cyren: AndroidOS/GenPua.185A3C66!Olympus
ESET-NOD32: a variant of Android/Cooee.E potentially unsafe
Fortinet: Riskware/Cooee_E!Android
Ikarus: AdWare.AndroidOS.Cooee
McAfee: Artemis!185A3C66DFD3
McAfee-GW-Edition: Artemis
Symantec Mobile Insight: AppRisk:Generisk
This confirms that the system app SystemUI of the latest official ROM is infected by a severe virus.
I posted my finding also on the ZOPO forum, but after several posts they do not accept messages any more claiming that they will be checked by the moderator.
I also recevied an email by ZOPO with the following answer:
Dear User
As we have told you before, if you flashed the software from our website, then it is ok.
Before we published, we would do full test, and it is no problem.
Thank you.
If you also can not accept this situation, please contact "[email protected]" and request a virus-free image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes, I found this
https://photos.app.goo.gl/NYz1VRMQrZXOWDIj1
Thanks a lot for the useful hint!
I also checked my /system/lib/libandroid_runtime.so (directly from my phone) with virustotal.com: 18 of 59 engines detect a virus of the Triada class.
Then I checked the same file from the Speed 7 system image (from 2016-09-21). The file on the ROM image and on my phone are identical, so it has not been modified "from outside" (maybe by another malware). So the virus is definitely pre-installed on the latest ROM image on a system library level (which makes things even worse)!
BTW: which virus scanner did you use to get your results? None of the ones I used up to now detected the problem in libandroid_runstime.so
Dr web or Norton. I have my own port now. Zopo stock is not safe
Zopo Speed 7 / 7+ ROM from 2016-09-21
two installations will always appear after a while "youtube stopped working"
complete blocking of your mobile. I installed Zopo Speed 7+ ROM Ghost45 here is OK.
This is also quite funny: beside the latest ROM images for the Zopo 7 / 7+ / 7C, also the Forum App provided on zopomobile.com is infected with malware!
If the APK file (ZOPO-Forum_APP.apk) is scanned with virustotal.com, 12 of 62 engines detect malware.
After complaining about this on the zopomobile.com forum, all my threads located there were removed and they removed my permission to post anything.
My conclusions for the future: I will never buy ZOPO products again. I will think twice before I will buy a cheap chinaphone again.
si1 said:
This is also quite funny: beside the latest ROM images for the Zopo 7 / 7+ / 7C, also the Forum App provided on zopomobile.com is infected with malware!
If the APK file (ZOPO-Forum_APP.apk) is scanned with virustotal.com, 12 of 62 engines detect malware.
After complaining about this on the zopomobile.com forum, all my threads located there were removed and they removed my permission to post anything.
My conclusions for the future: I will never buy ZOPO products again. I will think twice before I will buy a cheap chinaphone again.
Click to expand...
Click to collapse
Hi, never ever buy ZOPO!
They remove again all posts frome zopo forum
Try my PORT, https://forum.xda-developers.com/sp...t-port-umi-touch-speed7-t3704343/post74498536
mstdzw said:
Hi, never ever buy ZOPO!
They remove again all posts frome zopo forum
Try my PORT, https://forum.xda-developers.com/sp...t-port-umi-touch-speed7-t3704343/post74498536
Click to expand...
Click to collapse
Dear mstdzw,
thanks a lot for the offer! Your port is for the Speed 7+ (ZP952), I own a Speed 7 (ZP951). Can I also install your port on the ZP951 without problems or does one have to modify the ROM image?
Thanks in advance!
si1 said:
Dear mstdzw,
thanks a lot for the offer! Your port is for the Speed 7+ (ZP952), I own a Speed 7 (ZP951). Can I also install your port on the ZP951 without problems or does one have to modify the ROM image?
Thanks in advance!
Click to expand...
Click to collapse
I think this should work. Added zip with zp951 kernel.
mstdzw said:
I think this should work. Added zip with zp951 kernel.
Click to expand...
Click to collapse
Thanks a lot - I will give it a try during the next weeks!
Did it work? My ZP951 is still stock, what is this android version?
thanks

Android POS machine H10-1 made by Citaq? Can I reuse it for personal touch tablet?

Hey All
Its been a while since I got to play with anything these days but I recently found one of these POS 10in touchscreen units in the dumpster and it fires up into a menu running android. So I was hoping I could reflash this and use it like a tablet given it's also got a small thermal printer in it, so maybe try and save it from e-waste
I searched online for more details and came across this HERE which is identical to what I have so hoping I can root it and flash it with a clean android?
I would love to repurposed this to use as a touch screen tablet or similar, since it's got a GSM module and can take an SDCard too as I opened it up and took some pictures and I managed to get it in a recovery mode as well - from the PIX its using a rockchip RK3368
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not sure if the mini usb port is a OTG port to try and use ADB but I have not been able to do much with it and hoping someone can guide me through to possibly a reflash or ways to unlook root and add in another bootloader/rom
I've downloaded the files from citaq website but so far not been successful to do much with it, has anyone played with these and turned them into something more practical for the home?
Here's hoping for some tips - Apology if this is in the wrong section, move as needed :good:
Cheers
Kosti
@Kostiz
Device actually is running Android 5.1.1. It seems it has only 1GB RAM what is far too little to run a full fledged Android.
As long as you don't replace device's Stock Recovery by TWRP or similar recoveries, after a successful rooting don't install Magisk and/or Xposed Framework, you're on the safe side to play with, IMHO.
As 1st step check whether device is accessable by means of both ADB and Fastboot.
jwoegerbauer said:
@Kostiz
Device actually is running Android 5.1.1. It seems it has only 1GB RAM what is far too little to run a full fledged Android.
As long as you don't replace device's Stock Recovery by TWRP or similar recoveries, after a successful rooting don't install Magisk and/or Xposed Framework, you're on the safe side to play with, IMHO.
As 1st step check whether device is accessable by means of both ADB and Fastboot.
Click to expand...
Click to collapse
Hey, Thanks for chiming in!
So in order to get ADB and or Fastboot its suggested to enable USB debugging in the device system settings, but I am not sure on how to do this, would it be safe to assume this is already USB debug is already enabled?
Could I back up the original stock recovery
I'm a little green on the whole process hence looking thought I'd ask here, I don't think I even have an OTG cable handy
I will see if I can load ADB on a windows box and try and talk to this unit
Cheers
Kosti
@Kostiz
An OTG-cable isn't needed, because the recovery menu
doesn't give you the opportunity to load something from an USB-device
OK, some success!
I went back and connected a mini USB straight to the PC and ADB driver installed detected the android device.
Ran ADB in windows powershell
So whats the best method to backup the entire ROM, and recovery files in the event I stuff this up?
Do I use just ADB for this or someother tools?
I did try one tool here from the vendors website but stuck as not sure what the Chinese characters mean..
Is the fact that this is only 1G i couldn't run Android at all and needs to be stripped down?
Cheers
Kosti
@Kostiz
Android Oreo Go Edition is a lightweight distribution of Android that runs better than normal Android on devices with <= 1 GB of RAM
How to backup device's Stock ROM is eplained here.
Thanks again mate!
Seem I have to do a lot of reading and thankfully everything is here, just got to spend time to read and have a go!
BTW how do I go about using volume rockers and power button to move around the menu in recovery when there is none but only the two buttons as shown the reset and recovery buttons on the main board?
BTW, the current ROM installed boots into a special menu, all other settings are hidden, would there be a way to enable seeing all the items and when getting the the settings (gear icon) that pops up in the corner, only takes me to the standard wifi menu to choose a wifi, so it seems everything else is hidden, if by enabling these I could potentially not need to do anything other than stop the default application from starting up - if that makes any sense
Could I just get back into a adb shell and try
adb shell
su
pm enable applicationname
I have to read up on rooting first I assume before I do much more, this is getting exciting, LOL :good:
Kostiz said:
BTW how do I go about using volume rockers and power button to move around the menu in recovery when there is none but only the two buttons as shown the reset and recovery buttons on the main board?
Click to expand...
Click to collapse
You use Android's HOME button to navigate within the Recovery menu, use POWER button to select option.
Hi, fellas! Please help me with one of these Citaq H10 POS. All we have is bootloop with some custom ROM showing vendor's logo.
Forcing it into recovery gives me some dead android screen with "No command" text.
Please guide me through this challenge, cause I have no other option but to ressurect it somehow.
Good news is that I have another one that is working fine, so we could try cloning it or something. Please help!
Yet I can't attach pics, cause of few posts, but if needed I can PM some.
citaq h10-2
I am also stuck with this machine citaq h10-2 , i did use a wireless kb to move up/down and not the 2 buttons on the motherboard , i can talk with it with ADB but all you can do is put it in sideload to upload new firmware and put it in fastboot but in fastboot you only get a black screen , what I have don is > opened up developer mode but you have no OEM UNLOCK tick box in side so running any bootloader unlock dose not work and i have run them all, if you google this machine for flashing new firmware you only get XDA this forum, unless any body knows another place to get the info from please let us know as i do think this would make a nice tablet with printer, the firmware is 5.1.1 and would love to put 6.0 or above on it but. i did download some firmware and used sideload to install it but it come up with error , i did try and make a backup but cannot do it ?, I think the firmware was from a galaxy s5 , I am not into all this firmware flashing so I am learning as I go along and if I brick it up well it was for free any way as the takeaway was shutting down and he gave it to me so no loss, if any body knows how we can get 6.0 or above on this machine please let us know.
A big thank you to all that can help put android 6.0 or above on this tablet.
Did you guys take a look at the solution here ? It worked for me ! All with a 2k ohm resistor...
Hola, alguien tiene la Rom de este dispositivo?

Categories

Resources