[Q] PLEASE HELP, HTC Sensation!!! - Android Q&A, Help & Troubleshooting

PLEASE HELP...
I don't know the correct RUU to use. I Don't where to find the correct, HTC Sensation official stock ROM.
The device won't boot up, it only turns on when I hold the volume down and power button, but when I do that I get:
****LOCKED****
Pyramid PVT SHIP S-ON RL
HBOOT-1.27.0000
Radio-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
When I try to flash a boot.img or a recovery.img, it says:
sending 'boot' <3752 KB>...
or
sending 'recovery' <5352 KB>...
<bootloader> signature checking...
FAILED <remote: signature verify fail>
finished. total time: 2.356s
I have my CID and MID if that helps..
CID: HTC__001
MID: PG5813000
What do I do? PLEASE HELP ME!!!
Thank You in advance.

Related

[Q] flashing hboot problem

I am currently
S-OFF through juniperbear
with a 1.58 hboot
using smooth criminal rom.
I try to flash a hboot and this is what I get:
Code:
C:\Users\sfuga_000\Desktop>fastboot flash zip jb_hboot.zip
sending 'zip' (355 KB)...
OKAY [ 0.272s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 1.790s
I also tried with PG86IMG but got a CID error.
Any help would be appreciated.
Thanks.
__________________________________
Solved: I just fixed mine with going in the PG86IMG and open android-info.txt and changing it to the correct CID it said SPCS_001
but my CID was SPCS_002
Any help would be appreciated please..

help with flashing custom recovery (signature verify fail)

Hi,
I’m following the steps listed in this wiki for the HTC One T-mobile. I’m on the 2nd step “Flash a custom recovery.” I downloaded koush’s recovery (link provided on Install_CM_for_m7tmo of cyanogenmod wiki), and when I run fastboot on it, I get these results.
$ ./fastboot-mac flash recovery ./recovery-clockwork-touch-6.0.3.1-m7.img
sending 'recovery' (7270 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
So I tried another image I found, but same results.
$ ./fastboot-mac flash recovery ./recovery-clockwork-6.0.4.3-m7tmo.img
sending 'recovery' (8830 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
I’m in FASTBOOT w/ the USB cable hooked up and that screen shows these details:
*** RELOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.17.3250.20
OpenDSP-v31.120.274.0617
eMCC-boot
Any help much appreciated.
rrlangly said:
Hi,
I’m following the steps listed in this wiki for the HTC One T-mobile. I’m on the 2nd step “Flash a custom recovery.” I downloaded koush’s recovery (link provided on Install_CM_for_m7tmo of cyanogenmod wiki), and when I run fastboot on it, I get these results.
$ ./fastboot-mac flash recovery ./recovery-clockwork-touch-6.0.3.1-m7.img
sending 'recovery' (7270 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
So I tried another image I found, but same results.
$ ./fastboot-mac flash recovery ./recovery-clockwork-6.0.4.3-m7tmo.img
sending 'recovery' (8830 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
I’m in FASTBOOT w/ the USB cable hooked up and that screen shows these details:
*** RELOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.17.3250.20
OpenDSP-v31.120.274.0617
eMCC-boot
Any help much appreciated.
Click to expand...
Click to collapse
You need to unlock the bootloader first. That's what the 'relocked' you see in Fastboot refers to - your boatloader is re-locked.
Sent from my HTC One using Tapatalk

[Q] problem with droid dna after jtaged

hi
A few days ago my phone hard breaked
and i repaired boot with riff jtag box.now phone powerd on and run android but after 2-3 min system errored (process system isn't responding do you want to close it) and rebooted and repeated
phone info
getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.33.0001
INFOversion-baseband: 3A.32.306.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.13.401.4
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA2BPS507022
INFOimei: 3596910********
INFOmeid: 00000000000000
INFOproduct: monarudo
INFOplatform: HBOOT-8064
INFOmodelid: PL8320000
INFOcidnum: VZW__001
INFObattery-status: good
INFObattery-voltage: 4208mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 041a62aa
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
im cant flashing any thing stock recovery hboot radio rom...
fastboot flash recovery recovery.img
sending 'recovery' (11464 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
im try to flashed any thing , the error is writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
try to unlock with htc dev but error
Error Code: 160.
Error Reason: MID Not Allowed.
please help me :crying:
thx
guitarr said:
hi
A few days ago my phone hard breaked
and i repaired boot with riff jtag box.now phone powerd on and run android but after 2-3 min system errored (process system isn't responding do you want to close it) and rebooted and repeated
phone info
getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.33.0001
INFOversion-baseband: 3A.32.306.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.13.401.4
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA2BPS507022
INFOimei: 3596910********
INFOmeid: 00000000000000
INFOproduct: monarudo
INFOplatform: HBOOT-8064
INFOmodelid: PL8320000
INFOcidnum: VZW__001
INFObattery-status: good
INFObattery-voltage: 4208mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 041a62aa
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
im cant flashing any thing stock recovery hboot radio rom...
fastboot flash recovery recovery.img
sending 'recovery' (11464 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
im try to flashed any thing , the error is writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
try to unlock with htc dev but error
Error Code: 160.
Error Reason: MID Not Allowed.
please help me :crying:
thx
Click to expand...
Click to collapse
Try using rumrunner or moonshine to get soff and your bootloader unlocked then flash a custom recovery and new ROM.
Jaggar345 said:
Try using rumrunner or moonshine to get soff and your bootloader unlocked then flash a custom recovery and new ROM.
Click to expand...
Click to collapse
ican worked only in fast boot
info moonshine
Ok?
(Yes/No)
Yes
!! Do NOT for any reason touch, unplug, lick or maim your device !!
Checking for updates......
Please wait....
..........
ERROR: run distiller again and READ
any budy hear?
anybody can help me?
When using rum runner, disable all of your antivirus and malware software. Turn off your Firewall as well.
Sent from my HTC6525LVW using Tapatalk
I do the same
ThePunisher said:
When using rum runner, disable all of your antivirus and malware software. Turn off your Firewall as well.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I do the same
i run phone in fastboot mode and later run runner

Help please! I bricked hboot. I changed CID

Hi guys, I read thousands of post and didn't found a similar case to mine. This is what happened (sorry for my english, i speak spanish )
I bought my HTC One X+ on eBay believing it was the international version because they sold me unlocked and cleaned, but after flashing a wrong firmware version (thousands of times) I realized that my phone is the AT&T or Telus (evitare_ul) version :crying:
I was so desperate that even I changed the CID (I was S-off). At the beginning had SuperCID, now I have HTC__001 and the worst of all is that I changed the android-info.txt file from these kernels https www androidfilehost (dot) com / ?w=files & flid = 32755 and i flashed.. PUM hboot bricked, I know I'm a fool my fault, i didn't read the warnings.. :crying:
- I trying different RUU for my wrong combination of CID (HTC__001) and modelid: PM631**** and I didn't found.
- I downloaded the source code from htcdev (dot) com / devcenter/ downloads but I don't know what combination i have to do. I need some extra help to build a new firmware for my rare combination of CID, hboot, baseband version and modelid
I need your help please!
I will make a donation through Paypal to the person to help me with this. :fingers-crossed:
Summarize:
Code:
version-bootloader: 1.72.0000
version-baseband: 3.1204.171.33 (for my country we use GSM and UMTS 850/1900 Mhz)
version-main: 1.15.502.9
serialno: HT2BRW302088
product: evitare_ul
platform: HBOOT-T30S
modelid: PM631****
cidnum: HTC__001
battery-status: low
battery-voltage: 3598mV
devpower: 6
partition-layout: None
security: on
build-mode: SHIP
boot-mode: RUU
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Let me know if you need anything else.
Any help would be greatly appreciated.
Thanks!
jcaballero said:
Hi guys, I read thousands of post and didn't found a similar case to mine. This is what happened (sorry for my english, i speak spanish )
I bought my HTC One X+ on eBay believing it was the international version because they sold me unlocked and cleaned, but after flashing a wrong firmware version (thousands of times) I realized that my phone is the AT&T or Telus (evitare_ul) version :crying:
I was so desperate that even I changed the CID (I was S-off). At the beginning had SuperCID, now I have HTC__001 and the worst of all is that I changed the android-info.txt file from those kernel https www androidfilehost (dot) com / ?w=files & flid = 32755 and i flashed.. PUM hboot bricked, I know I'm a fool my fault, i didn't read the warnings.. :crying:
- I trying different RUU for my wrong combination of CID (HTC__001) and modelid: PM631**** and I didn't found.
- I downloaded the source code from htcdev (dot) com / devcenter/ downloads but I don't know what combination i have to do. I need some extra help to build a new firmware for my rare combination of CID, hboot, baseband version and modelid
I need your help please!
I will make a donation through Paypal to the person to help me with this. :fingers-crossed:
Summarize:
Code:
version-bootloader: 1.72.0000
version-baseband: 3.1204.171.33 (for my country we use GSM and UMTS 850/1900 Mhz)
version-main: 1.15.502.9
serialno: HT2BRW302088
product: evitare_ul
platform: HBOOT-T30S
modelid: PM631****
cidnum: HTC__001
battery-status: low
battery-voltage: 3598mV
devpower: 6
partition-layout: None
security: on
build-mode: SHIP
boot-mode: RUU
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Let me know if you need anything else.
Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
Breathe...
first up you need to charge the device, once you've done that grab one of the EVITAREUL the AT&T rom's and recoveries and flash them.
Sorted.
FAILED (remote: 12 signature verify fail)
Thanks for response, I charged my phone and I tried flashing these firmware (from forum.xda-developers com / showthread.php?t=2235248) but i got an error
Code:
C:\adb>fastboot flash zip RUU_EVITARE_UL_JB_45_Cingular_US_1.19.502.1_Odexed.zip
sending 'zip' (609633 KB)...
OKAY [ 77.719s]
writing 'zip'...
(bootloader) signature checking...
[B]FAILED (remote: 12 signature verify fail)[/B]
finished. total time: 104.810s
Code:
C:\adb>fastboot flash zip RUU_EVITARE_UL_JB_45_Telus_WWE_1.20.661.1_Odexed.zip
sending 'zip' (588120 KB)...
OKAY [ 71.639s]
writing 'zip'...
(bootloader) signature checking...
[B]FAILED (remote: 12 signature verify fail)[/B]
finished. total time: 97.739s
Wouldn't it be because my CID is HTC__001 = WWE and mi modelid: PM631****?
Is there a way to change the build.prop from these zip files to match my CID or another info?
Remember: I'm stuck in boot-mode: RUU, can't go to the recovery to unlock and change my CID (like before)
Thanks!:good:
jcaballero said:
Thanks for response, I charged my phone and I tried flashing these firmware (from forum.xda-developers com / showthread.php?t=2235248) but i got an error
Code:
C:\adb>fastboot flash zip RUU_EVITARE_UL_JB_45_Cingular_US_1.19.502.1_Odexed.zip
sending 'zip' (609633 KB)...
OKAY [ 77.719s]
writing 'zip'...
(bootloader) signature checking...
[B]FAILED (remote: 12 signature verify fail)[/B]
finished. total time: 104.810s
Code:
C:\adb>fastboot flash zip RUU_EVITARE_UL_JB_45_Telus_WWE_1.20.661.1_Odexed.zip
sending 'zip' (588120 KB)...
OKAY [ 71.639s]
writing 'zip'...
(bootloader) signature checking...
[B]FAILED (remote: 12 signature verify fail)[/B]
finished. total time: 97.739s
Wouldn't it be because my CID is HTC__001 = WWE and mi modelid: PM631****?
Is there a way to change the build.prop from these zip files to match my CID or another info?
Remember: I'm stuck in boot-mode: RUU, can't go to the recovery to unlock and change my CID (like before)
Thanks!:good:
Click to expand...
Click to collapse
If you can issue fastboot commands, you can issue fastboot flash recovery recovery.img >
Select hboot (ignore the crap that shows up)
Select recovery
You CANNOT flash the modified sense rom's in fastboot as the MD5's or whatever the hboot looks for are wrong, hence the wrong signature.
I tried with two original recovery.img from AT&T, but i get: FAILED (remote: not allowed)
Code:
C:\adb>fastboot flash recovery recovery_signed.img
sending 'recovery' (7500 KB)...
OKAY [ 0.926s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.960s
Code:
C:\adb>fastboot flash recovery ATTrecovery.img
sending 'recovery' (8224 KB)...
OKAY [ 1.019s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.040s
I can't flash anything because i'm S-ON, I'm stuck in RUU mode and I think that the only way to revive my phone is with an original RUU.exe (that doesn't exist because i changed my CID) I tried with all these RUU (www androidruu com / ?developer=EvitaRE) and i get the same error about the signature or wrong model.
I don't know if compiling from the source code (www htcdev com / devcenter / downloads) with my requirements would work, but I will pay the person who do that and makes a zip signed or encrypted firmware capable to flash in my phone...
I'm about to buy an used board to replace my f***g bricked HOX+
I don't know what to do. I'm about to give up :crying:
I extracted the rom.zip from this RUU RUU_EVITARE_UL_JB_50_S_Cingular_US_2.15.502.1_Radio_2.21.5517.15_18.27.11.35L_release_341689_signed_0220.exe
Code:
C:\adb>fastboot flash zip rom_01.zip
sending 'zip' (33584 KB)...
OKAY [ 4.109s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) Your memory size = 59640MB, choose rawpt_64g.img
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 6.627s
I want to edit the android-file.txt from the .zip to put my CID HTC_001 (that i changed for fool) but i need to resign or encrypt the zip before flashing again. Is there a tool that do that? I think i'm screwed :crying:
Also, i can't do the same step with this RUU_EVITARE_UL_JB_45_TELUS_WWE_1.15.661.11_Radio_1.09.55.17_18.20.95.55L_release_290307_signed because the zip is corrupted, i downloaded several times
Code:
C:\adb>fastboot flash zip rom.zip
sending 'zip' (669207 KB)...
OKAY [ 81.936s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) time: 4018
(bootloader) rom parsing finish ...
(bootloader) Your memory size = 59640MB, choose rawpt_64g.img
(bootloader) Read zipped android_info fail!
Anyone have the version not corrupted of this RUU? I downloaded the corrupted from www.androidruu.com/?developer=EvitaRE
Thanks!
Are there no other WWE evita ruus you can find? I agree you are probably out of luck, but that would be the only way to fix things that I can think of.
I think, though, you've learned why it's a very bad idea to go back to s-on after modifying your phone. There is no good reason to ever do it, and the risks are large. You changed around a whole bunch of basic settings and firmware, and then locked them down before determining if your phone was stable.
If the ruus don't work, a repair shop with jtag might be able to fix it by flashing the motherboard directly.
Okay, lets just recap.
So you flashed a kernel that was not supported by your model and now the device wont boot. So you tried to flash a ruu, but couldnt find one with your cid. So you changed your cid and re-applied s-on?
So no ruu flash occured?
Just the bad kernel flash?
Then how about this for a plan.
1. htcdev unlock the bootloader.
2. Flash a compatiable custom recovery from your device specific section.
3. Flash a compatiable custom rom for your device, thus making it boot again.
If your hboot has not been damaged ie wrong hboot flashed then a htcdev unlock should work fine. No ruu needed, not that they will work without the mid and cid matching.
Sent from my LG-D802 using Tapatalk
Edited to remove irrelevant data.
Jtag, my last chance
Hi guys, thanks for your help
iElvis, you right, I did things that I didn't know what it was about, I was so desperate.
I'll send my phone to a repair center where use the JTAG. Thanks for the info, I didn't know there was such thing :good:
heavy_metal_man
Yeah, that's the summary of what I did.. but.. I can't go back to the recovery (hboot don't work), i'm stuck in ruu mode (black screen with htc logo), So, I can't unlock de bootloader because I can't go in fastboot mode, I'm S-ON and everything I've tried I get this error: FAILED (remote: not allowed) :crying:
If you know someone (an oriental guy hahaha) that know how to encrypt a modified zip RUU to flash in ruu mode, please let me know
Thanks for everything :good:
Cheers.
jcaballero said:
Hi guys, thanks for your help
iElvis, you right, I did things that I didn't know what it was about, I was so desperate.
I'll send my phone to a repair center where use the JTAG. Thanks for the info, I didn't know there was such thing :good:
heavy_metal_man
Yeah, that's the summary of what I did.. but.. I can't go back to the recovery (hboot don't work), i'm stuck in ruu mode (black screen with htc logo), So, I can't unlock de bootloader because I can't go in fastboot mode, I'm S-ON and everything I've tried I get this error: FAILED (remote: not allowed) :crying:
If you know someone (an oriental guy hahaha) that know how to encrypt a modified zip RUU to flash in ruu mode, please let me know
Thanks for everything :good:
Cheers.
Click to expand...
Click to collapse
Try the command
fastboot reboot-bootloader
To get out of ruu mode.
Sent from my LG-D802 using Tapatalk
heavy_metal_man said:
Try the command
fastboot reboot-bootloader
To get out of ruu mode.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
No man, It brings me back to the ruu mode, i damaged my hboot
Guys, I will try this tool to encrypt the ruu.zip with the modified CID, i'm installing a linux virtual machine.. I will keep you informed...
http://forum.xda-developers.com/showthread.php?t=2199638
Bad news
I re-encrypted a ROM, but I have the same issue about the signature..
"The leading 256 bytes is the signature of the zip file, you'll need to disregard it. There's no way we can sign the zip correctly without HTC's private key"
https://github.com/kmdm/ruuveal/issues/8
Sending to a Jtag repair center...
Cheers

HTC Desire 609d (CDMA \ GSM) Firmware

Good day dear specialists, friends etc.
Please assist with my HTC 609d which not working well. When pushing PWR button, my device make 7 vibrations and stay in HTC logo with white background. In a case of click PWR + VOL-, device load FASTBOOT menu. Any items don`t work - recovery, reset etc, we may get HBOOT meny, only.
Bootloader - UNLOCKED
VIA ADV \ FASTBOOT from Win7:
c:\Android>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.03.0001
INFOversion-baseband: 1.02.10.0917
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HC3CTMR02037
INFOimei: 355195000000017
INFOmeid:
INFOproduct: cp3dcg
INFOplatform: HBOOT-8x25Q
INFOmodelid: PO4710000
INFOcidnum: HTCCN702
INFObattery-status: good
INFObattery-voltage: 3840mV
INFOpartition-layout: HTC
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-a87dbd86
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
When try to flash anythink get FAILED
c:\Android>fastboot flash recovery recovery.img
sending 'recovery' (6910 KB)... OKAY
writing 'recovery'... FAILED (remote: image update error)
c:\Android>fastboot flash boot boot.img
sending 'boot' (4508 KB)... OKAY
writing 'boot'... FAILED (remote: image update error)
Also, can not RELOCK bootloader:
c:\Android>fastboot oem lock
... INFOLock failed!
FAILED (status read failed (No such file or directory))
HBOOT-1.03.0001
RADIO-1.02.10.0917
OS-
eMMC-boot
Oct 18 2013,22:38:27.0
Please help to found:
- ROM for my CID CN0702 (for install via SD card or RUU)
- flashable recovery \ boot \ system
- other
Thanks in advance.
Friends, hello.
Have You any customs ROMs (Android 5.x and higher) for this device?

Categories

Resources