My partner recently dropped her SGS3 from about 2 feet onto the floor. It was in a rubber case (ZeroLemon battery case) but the screen is now black. It's not cracked at all and the digitizer still works fine and the phone rings and if you touch the screen in the right place you can answer calls etc.
For a few days prior to this there were occasional lines on the screen and I suspected a loose connection at the time. After the drop and the screen going black I took it apart and sure enough the ribbon cable to the screen had popped off. I have put the cable back on but the screen is still black. When turning the phone off and on, the backlight does flicker on for a split second but there is no graphics on the screen visible. Even booting into download or recovery mode nothing is visible on the screen.
It was running CWM recovery (I can't remember which version) and CyanogenMod 10 (unsure of the exact version) and we desperately need to access some data from the phone, particularly the contacts and text messages. Is there a way we can recover this or gain remote control of the phone from a computer at all? I've seen several posts about using the SDK and ADB to do this but USB debugging is disabled so this wouldn't be an option. I've also read that it's possible to get an adb shell to enable debugging from CWM but can't seem to find any clear instructions on how to do this, I've booted into CWM and tried the adb tools but it does not list the phone.
Can anyone advise why the screen wouldn't work after plugging it in again? Or is there any other way to control the phone from a computer without usb debugging being enabled? My partner is desperately trying to access her google account and this phone is the only device that's logged in and is her only hope to recover the account.
Related
My Vibrant fell this morning face down flat on the screen, I picked it up and was happy to see that the gorilla screen was perfect, not a scratch on it, but that turned to disappointment when I went to turn on the phone and saw a purple hue across my screen, but things were still visible but barely.
About 30 mins later, the screen is now not visible at all except for a small line near the bottom that is very bright (almost seems like the entire image of the screen is squished into this thin line).
Here is the problem. I need some of the stuff that is on my phone but have a pattern lock-screen on it and I cannot see the screen to put the pattern in, I have tried numerous times and get nothing. I was thinking if I can get it hooked up to a PC I can copy everything off. Is there some other way to maybe boot the phone in a mode to connect to a PC?
Other alternative is to buy just a screen and replace it with my broken one. Does anyone know where I can buy just a screen? I don't want to spend too much because I am a couple weeks away from getting the new Galaxy S II when it releases on T-Mobile Oct. 12th, I don't care to completely fix this Vibrant, I just want my data/apps off of it.
Thanks for any help.
mgiusto
I just need instructions on how to boot into ADB mode without being able to see the screen at all. Can someone please help?
Thanks!
Assuming your phone is rooted and have USB debugging enabled you can always try using "Droid Explorer" for windows. Within this program you can copy files without having to mount your sd card...you just need to have USB debugging enabled though otherwise it will not work. You can also access an emulator within this program called android screencast which will basically emulate your phone allowing you to navigate through your phone with ease. Your best option will be to download this Droid Explorer program for windows or you can also try adb but I don't know the commands so sorry.
Yesterday I dropped my Galaxy S3 GT-I9300 softly on the floor, but immediately I noticed that there was a problem with the screen: the glass was not broken, but colours were abnormally green, with a horizontal white line at the top of the screen, and a little circular dead zone in the upper left corner. I could still use it. But a few hours later, the light intensity of the screen had progressively and drastically decreased, and the phone could no longer be used. Today, the screen is totally black…
All data was saved on the external card, and I thought that Gmail synchronization would have saved my agenda. So initially, it did not seem like a too big problem, except for the cost of screen replacement, but when I realized that my calendar synchronization had not been not properly configured, the problem suddenly became more serious! My main problem is now data, not screen!
When the phone is on, and connected to my PC via an USB cable, I can only access two folders on the phone: “Card” and “Phone” (the external card is still in the phone). I have the original ROM, the phone is not rooted.
Do you think that my calendar data is there somewhere? I don’t know where to find it.
I’m afraid that all data will be lost if I send back my phone to the reseller's after sales service.
Alternatively, is there a mean, with an HDMI adapter and an external screen, to use the phone anyway: only the display does not work, the rest of the phone seems OK. The touch screen still worked fine yesterday, when I could still see something. Will I see anything on the TV when touching the phone screen? It would be wonderful if I could just reconfigure my synchronization, in spite of that black screen, and thus recover my agenda data via my Gmail account, before sending the phone to the after sales service.
Any suggestions are welcome.
Search exact same question been asked before and i believe a workaround was found .
jje
You can use ADB to make a backup of all your apps + data. However USB Debugging must be enabled for this to work. Is it enabled on your device?
If yes, there are a lot of guides on how to backup your phone`s content such as Apps + Data.
One such guide is this: http://www.thesuperusersguide.com/adb-backup--restore.html
No, I had not activated "ADB debugging" and without screen, it seems a little bit difficult to do it now, thus precluding "ADB" use. That's why I was wondering if there was a possibility to use the phone with an external screen via a MHL-HDMI adapter, assuming the touch screen still works… Any idea?
yes, just do that. you can also access adb from recovery without having to enable anything
I am now pretty sure that touch screen is OK. Even if I don't see anything, swiping the screen to unlock it produces the usual sound. So I won’t do anything until I get a MHL HDMI adapter. I think it is the simplest way, if that works… I keep you informed in a few days. Many thanks
So I've been searching Google all day and still can't find a way around all this...
Phone (Nexus 5) got the black screen of death, where a connector on the motherboard gives up due to heat/old age. It only then works by applying pressure to the connection. The digitizer would sometimes play up and I'd have to press on the spot to write emails and texts. My phone got the the point where it became unusable and the digitizer started spazzing out, in that, the flight mode button got pushed, now the screen doesn't work at all.
So heres my dilemma..
Since I flashed Android 7.1 the USB debugging mode has never stayed on through a reboot and is currently off. That ruins my Vysor option to control the phone via usb. Theres a post about a guy who turned on USB debugging via Cerberus which I have, but with flight mode on that rules that out. I've managed to find my way into recovery and ADB works but I have plenty of issues, maybe because I had to use SUhide atc after 7.1 decided to clamp down on rooted devices with banking apps, snapchat etc. My Slimport hdmi adapter isn't working well but I guess thats a cheap fix and will allow me to at least see the screen, (no digitizer though). Other option is to use usb otg to connect a mouse and try things blind.
So are there any other ideas out there? ADB still may work, I got Boot.img onto my computer, but had trouble unpacking it.
Hi guys,
My screen recently died. Before fixing it at a specialized shop, I want to retrieve the data from the phone. Sadly the phone is pattern-locked and until I unlock it I can't access the data when I connect it to my PC. The screen is essentially dead. The image is almost totally black except for small layer in left top corner and the touch sensor is unresponsive, but other than that the phone works and receives notifications and so on.
USB Debugging mode isn't active on the phone and thus I can't replicate the screen of the phone on my PC through software alone, when I connect it via micro-USB. I also didn't think of this problem in advance and I'm not registered on Sony's FindMyMobile or any similar apps.
I tried using a HDMI-MHL adapter and I confirmed that the phone is indeed working because I'm able to get the phone screen's image on my TV. The problem is I can't actually interact with the phone because as I said earlier the touch sensor is not working.
The HDMI-MHL adapter I've used also seems to have a micro-USB port but that seems to work for power only. If I connect a USB-OTG cable on it and connect a USB mouse to it I get image but no mouse. If I connect the USB-OTG and the mouse, alone, I get a mouse cursor but I can't see what I'm doing (phone vibrates as I 'try' and draw the unlock-pattern blindly).
So, Sony Xperia Z3 Compact screen is dead, I wanna connect my Xperia to my TV via HDMI AND use a mouse at the same time to control my phone. Is this possible_
I also thought of another option... go to recovery mode and flash a zip that removes lock. I thought of trying step by step (switch keyboard and TV al the time just to get at point where I can find zip file and flash it). Unfortunately in recovery mode the phone does not allow to stream to TV. It only works when phone is after SIM lock.
Two additions: by removing and re-installing ADB on my laptop my phone is unauthorized. Only a matter of clicking on yes/allow on phone but that's not possible and TWRP 3.1.1-0 is installed.
Anyone any clue? I know I ask a lot but I'm searching the internetz for 2 days now and I'm devistated.
THNX a great bunch!!!
ciao
Valentijm
PS Copy/paste a part of the text from a guy from the internet who had exactly the same problem as I did but his thread ended a few months ago without result.
Just 30 minutes after my post I magically had all the dots correct and that blind!!! So turned on USB debugging and got rid of lock pattern. It was a nice three days of my life Guess there was no solution than getting lucky like I did or screen replacement and getting all your data removed.
ciao
Ever since a few days ago, my LG G5 became very unresponsive. I can only turn off my phone by taking out the battery (which is probably not good) and when I turn on my phone, it only stays responsive for about 10 seconds before I cannot do anything; I can't turn off the phone using the power button (nor hold it down for a hard power off), I can't turn up or down the volume, I can't touch my screen anywhere. At first I thought this might be a hardware problem, and it might still be, but when I turn on the phone it stays perfectly responsive for 10 seconds. No problem turning on and off the phone, volume works and I can touch the screen. Then the phone freezes. The screen is still on and working as notifications are popping up and the wifi and service bars are still going up and down. All I am trying to do is turn on file transfer to send all my photos and videos to my computer. My phone is cracked pretty badly at the top and I do get a static line through my phone but giving the fact that it works for the 10 seconds, I wasn't sure if it had to do anything with the screen and power button becoming unresponsive.
P.S. I am getting a new phone but I would really like to get the photos and videos off this phone. If there is a way to turn on file transfer without using the screen then please let me know too.
EDIT: I think that there are some spots on the screen that are ghost touching as the pull down menu seems to shake and the phone occasionally turns off on its own (double tapping same spot)
Hi, if you have TWRP installed (or USB debugging already enabled) you can use the ADB PULL command to retrieve the photos from the phone. You can also simply use the MTP transfer by just connecting the phone to the PC with the cable.
If you have an OTG USB adapter you can connect a mouse to the phone and use it instead of the touchscreen to do what you want.
Then, when you have retrieved you photos, you may try to factory reset the phone by booting in stock recovery (if you don't have TWRP) or wiping system partition and reinstalling the ROM (if you have TWRP), to check if the unresponsiveness is caused by the broken touchscreen or maybe by some virus.
tremalnaik said:
Hi, if you have TWRP installed (or USB debugging already enabled) you can use the ADB PULL command to retrieve the photos from the phone. You can also simply use the MTP transfer by just connecting the phone to the PC with the cable.
If you have an OTG USB adapter you can connect a mouse to the phone and use it instead of the touchscreen to do what you want.
Then, when you have retrieved you photos, you may try to factory reset the phone by booting in stock recovery (if you don't have TWRP) or wiping system partition and reinstalling the ROM (if you have TWRP), to check if the unresponsiveness is caused by the broken touchscreen or maybe by some virus.
Click to expand...
Click to collapse
So I did figure out a way to connect my phone to my computer by using Vysor. Because Charging only was enabled, I couldn't transfer my files. So when using Vysor I turned on File Transfer which then got the phone to be able to transfer files. Fast forward to today I remembered that I also need to save my contacts so I tried using Vysor again but now because the phone is on File Transfer only I can't use it. Do you know of a way to switch back to original settings?
Davidkm8 said:
So I did figure out a way to connect my phone to my computer by using Vysor. Because Charging only was enabled, I couldn't transfer my files. So when using Vysor I turned on File Transfer which then got the phone to be able to transfer files. Fast forward to today I remembered that I also need to save my contacts so I tried using Vysor again but now because the phone is on File Transfer only I can't use it. Do you know of a way to switch back to original settings?
Click to expand...
Click to collapse
Maybe the contacts are saved in Google Contacts, try logging into the website and see what shows up.