hi. iI have a problem in my phone USB when I connect it to my pc the phone just charge and the pc dosen't recognise the phone . I tried on many computer .change USB cable even* i unrooted and formated my phone but nothing changed!!!!! My phone is general mobile discovery ...jelly bean 4.2.1.
Please some help
Thanks
it sounds like the usb-port is damaged. I dunno what phone you have, but USB-ports can be replaced/repaired on some phones - e.g. S2
http://www.youtube.com/watch?v=q4e-5xkhvHA
Related
hi guys..
my (rooted GS2 running on stock 2.3.5) do nothing but charging when connected to usb cable
1-tried many cables
2-usb debugging on/off
3-*#7428# method
4-turning on,off ,removing SD card
5-tried different usb ports,different pc, laptops
all don't work (
SOS please..i can't connect the phone to pc ,only by wifi maybe but i wanna use my usb for God's sake ?!
FYI ...I found many people suffering from same issue without answer..help me..help them ..thx
Try different USB ports; use a mainboard (powered) port on the PC/laptop itself, and don't use a hub, not even if it's powered. Also try uninstalling Kies, rebooting, re-downloading it, reinstalling it & rebooting again. You need the drivers, might be a problem around those.
go to some friends with Windows 7 with network access, plug in your phone and see if it recognised by Windows and Windows attempt to install drivers.
I found this at work, i was plugging my phone into a monitor usb which is not directly into the desktop, i found i had to plug it into the pc itself. I believe it to be the power/speed of the port
yeah I've had the same problem, my pc doesn't detect the fact that I've plugged my phone in on any port, front or back and my phone doesn't detect that it's been plugged in, but it still charges, I'm currently using Resurrection Remix 2.4 on the latest Siyah
TIA
Beans
Sent From My Resurrected I9100
did it work for
bbeanss said:
yeah I've had the same problem, my pc doesn't detect the fact that I've plugged my phone in on any port, front or back and my phone doesn't detect that it's been plugged in, but it still charges, I'm currently using Resurrection Remix 2.4 on the latest Siyah
TIA
Beans
Sent From My Resurrected I9100
Click to expand...
Click to collapse
did u solve the issue then mate ?
i also got the same issue with my S2..had to replace the usb in the phone....but thankfully it was in warrenty so did not pay a penny
Hi all,
Recently after flashing my S2 with aokp rom , i have no more acces to my phone as usb storage, it charges only and moreover i can no more have access to odin (it shows driver not found). I tried differenent solution like :
1- change cable (th same cable is ok for samsung mini)
2- hard reset
3-reinstalling drivers with kies and samsung drivers
4- going to drivers et uninstalling them (the pc dont show nothing at all like my phone its not plugged)
Somtimes it worked like 2 on 10 attempts but after 2 days no more
Also i noticed somthing in download mode it shows that i cant recognise the device, a bootloader problem maybe(correct me if i am wrong)
Thanks if you have already a problem like that , i googlied the problem but no one have a solution hhhhh
rethanks all
Try to check the advance settings in settings>storage
Sent from my GT-I9100 using XDA
Download mode should work regardless off your rom type.
Try different USB port, or try different computer
U really should try to clean the Micro USB port in first place, i read a lot of cases that phone was not recognized or it just didnt appear to connect to computer just because the port was oxyded... after cleaning (maybe with a very little screw and cotton) try to connect, if it dont, try on another computer, if it still happens its a problem on ur phone, then u will need to flash something, but lets wait till u test all this first ! keep us informed !
Dont forget to try to borrow a usb cable from a friend ! Doenst matter if urs works on another phone...
Hi thanks , for testing another computer i have three at home , same problem.
For cleaning usb port , it is not dangerous?? do you know is there a clean way to do it.
PS: i ll try tonight cleaning it a little:fingers-crossed:
Unfortunately i have the EXACT same problem.. tried everything "changing storage, re installing drivers, cleaning the usb port, trying different pcs and cables". Nothing works :S .. it also works at random times and then stops. Really annoying.
Well i clenaed the usb port with a needle and cotton but no detection, but i noticed that if my phone is off he is detected as unkown device
@HiNd0rZ: did you noticed the same thing
Well maybe it's not a hardware problem, i found that bootloader is related to driver usb detection, a bootloader problem maybe (correct me if i am wrong ) hhh
I have the exact same problem, the only difference is my sgs is still not rooted or flashed,
the last thing I did is update from gb to ics
what I has tried is hard reset, clean the usb port and try with another pc (2 notebook, 1 pc) and with 3 different cable
still not recognized....
No it's starting to bother me , after i full charge it acts like it charges but it's not plugged i think my usb port is caput , i'll try to take it to someone no guaratantee to send it back
Well finally i changed the usb flex cable and it worked but be carefull at testing the phone when you send it to repair the usb flex cable have also the micro so ba aware at testing the phone
Thanks for all and good luck for others
Well, the day before it occurred to me that I'd like to install a custom ROM, therefore I went on to plug my phone into my PC and for my surprise, the phone didn't pop that MTP warning and the PC did not recognize it.
So I went around and changed USB ports, cables and PCs, same thing.
Decided to try Mass Storage mode, when I press the START button and put in the cable it goes back into the main start screen.
So I went on and tried that *#7284# trick people used since apparently 4.0.3 bugged some crap stuff in the phone, no success either.
Strangely enough I can connect the "pendrive dongle" and it will map pendrives.
Well, I don't have my phone rooted or with SU so that means CWM from app store won't be able to install the recovery module, and I can't install... you get the picture.
Nor ODIN nor HEIMDALL will recognize my phone in recovery mode, wich suggests that the data lanes on my phone went somewhat dead.
Finally, any cable I plug in the phone says it's charging my device, wich leads me to belive that the usb port is dead.
Anyone had this issue?
Anyone can confirm me I'll have to take it to Sammy's assistance?
Sure looks like the USB is dead/dying.
Sent from my digital submersible hovercraft.
So I got one more question, can I root and/or install CWM so I do not stay dependent of the USB to update it or I do need to plug in the USB to install CWM through ODIN?
Several problems
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Angelkom said:
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Click to expand...
Click to collapse
Warranty has already expired.
Kies was installed on the PC, ODIN gives no info @ COM port.
I wanted to connect it just to root and install CWM so I can swap ROMs as much as I want.
Thing is, the customer service wants 1 week to assess the issue and probably 100USD to fix it.
So for some god-knows-why reason my phone decided to conect to MTP while charging, I quickly restarted it into revocery mode and flashed CF_Root w/ CWM5.5.
Successful!
Bloody USB thingy!
Now I can start messing around with the phone.
Anyone has a n00blet guide on ROMs?
I was thinking about moving to CM 10.1, one of those nightlies running 4.2.2.
This is the one I used >> CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5
Can anyone suggest actions?
For future you should change your USB-Port. Here we get one for about 15 € (about 20 $) in ebay. It's very simple to change and then you have a full working phone again. Just watch the Videos on Youtube and everyone can do this. Hope I could help!
hallo guys, i really need your help on this:
my sgs3 stopped working after running the official update (4.3)
its starts off well with the initial logo but doesnt start up beyond that.
Now my main problem is that the usb hub is broken so i have no other
means to connect the phone to the pc and sort it out through kies
or ordin.
im able to dismantle the phone completely so my question would be
are there places in the phone that i can connect the usb wires (naked wires) after
opening up the phone so that i can bypass the hub issue and have it connected to the pc?
im aware there are four important wires in the usb plug
another thing, i've tried installing firmwares from the sd card but they all
got rejected by the phone for signature reasons.
kindly help, thank you
Factory reset in recovery first, without a usb connection you can't do much.
Sent from my GT-I9300 using Tapatalk
Hi
i have installed xperia rom on Samsung galaxy s3 i9300 and it works so good except one thing
when i want plug my phone cable to the laptop . the laptop doesnt feel the phone at all or show me the mass storage , i tried to active
delevoper option and usb debugging it is same . Although when i restore my phone to original belly jea,, it works my usb very well
i like this rom xperia but i dont know how i should fix this