Does anyone know how to root micromax bolt a46.pls help......
Simplest way to root micromax a46
rahulsuresh said:
Does anyone know how to root micromax bolt a46.pls help......
Click to expand...
Click to collapse
Steps of the method:
1.- Download SRS Root
2.- Install the app SRS Root in your PC.
3.- Make sure that this enabled the resources of other platforms are google play. I can look at the following path: Menu> Settings> Unknown sources (ON)
4.- Put your phone on USB Debugging mode (activate checkbox on Settings>Development options>USB debugging or Settings>Applications>Development>USB debugging).
5.- Make sure the Android drivers for your phone are installed in your pc. If not, you can find some drivers in this page.
6.- Connect your device to your PC via USB cable.
7.- Run SRS Root in your PC.
8.- Click on one of the ROOT options in this software, and wait till it’s finished.
9.- If you want to check if you are already root or superuser in your Android phone or tablet you can download HowToRoot app from Google Play Store and click over the padlock in the top-right of the screen. It will show you a message about if your device is rooted or not.
NOTE : you must root your device at your own risk.
Root Micromax A46 simply.
You need to download framaroot 1.6.1 apk and install it and then open up the framaroot app and click to boomir button. So your phone is rooted by this method easily.
Bro,I have Cwm ready for Micromax Bolt A45 Msg me if you want
Sent from my Micromax A46 using XDA Forums PRO
Related
Recently i've been seeing ALOT of queries about how to root the Softwiner EVB Android Tablet
I have one myself and found a way and have tried and successfully completed the process myself.
This is an easy 6 step process. Basically this is what you do.
1. Back your tablet up, probably to your PC, laptop or whatever.
2. Factory reset it so everything is wiped, it should restart
3. It should be rooted after its restart!
4. Restore everything so you can get your apps back
5. Download a root check app from Google Play (it should confirm your device's root) or use SuperOneClick as a fake attempt to re-root your tablet, when it is about to start rooting your tablet a message should pop up saying that your device is already rooted
6. That's it! Have fun and buy a root beer or something
If this helped please click the "Thanks" button, i'll do the same if you just ask me, it's only one click and would mean a lot to me
if you need me for more Softwiner EVB information or information about any android devices (and blackberry devices but i don't know what will bring you here but just in case): follow me on Twitter and DM me @LordwinOfficial
Rooting nuclear softwinerevb
Not working for me. There is no superuser soft or icon after factory reset.
My Tablet is
Manufacturer: unknown
Model: SoftwinerEvb
Android Version: 4.1.1
Build ID: nuclear_evb-eng 4.1.1 JRO03C 20130504 test-keys
Board ID: nuclear
Chipset Platform: exDroid
I tried to root it using SRS Root software. It says that my tablet is root and have superuser icon.
But that superuser irself didn't have a root access.
Is there any ideas how to completely root it.
Thank you
mrlee2k said:
Not working for me. There is no superuser soft or icon after factory reset.
My Tablet is
Manufacturer: unknown
Model: SoftwinerEvb
Android Version: 4.1.1
Build ID: nuclear_evb-eng 4.1.1 JRO03C 20130504 test-keys
Board ID: nuclear
Chipset Platform: exDroid
I tried to root it using SRS Root software. It says that my tablet is root and have superuser icon.
But that superuser irself didn't have a root access.
Is there any ideas how to completely root it.
Thank you
Click to expand...
Click to collapse
Same here
Problem Solve
My problem solved.
I found out that SRSRoot software really did root my tablet. the problem is the Superuser.
So when I update superuser (apk and binary) from 3.0.3.2 to 3.1.1 manually using adb push, the Superuser
thing works fine.
I'm a ahppy man now....
Good luck tou you all
Cheers
[ROOT][GUIDE] How to root non-prerooted SoftwinerEvb Tablet
This is a Root Tool for Android 4.0/4.1 devices.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.
ADB Driver universal
Do I need to worry about "unknown publisher"? Thank you.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.[/QUOTE]
No you don't.
Sent from my SAMSUNG-SGH-I317 using xda premium
Custom Recovery
Is there a custom recovery for the softwinerevb yet? I have one that came with 4.1 this tablet needs a downgrade bad. Very slow. Not happy wit it at all so far. I have root using Bin4ry method. It worked very well. The bad thing is that the creator has posted the file on a site that never lets you download it. You can find it other places tho.
Kingroot worked as well
Sent from my Nexus 5X using XDA-Developers mobile app
Hi,
I've just bought a chinese mobile ISA A19Q and I can't get root. It has MTK6589 and Android 4.2.1
I've tested:
* MTK Droid tools v2.4.3 , the phone asks me to restore , I accept and it starts restoring, it finishes in about 1 second and MTK Droid tools progress bar cycles for hours with no result.
* Root_with_Restore_by_Bin4ry_v25 with the same result, tries to restore the phone but it can't get root
* Flashtool with a recovery ROM from CWM with no result, in the beginning I could flash some images with no effect in the factory menu (booting with vol - and power) but since I restarted the software with the factory menu I can't.
Don't know if this menu has any option, to be root, I post a photo here: http : / / s11.postimg.org / draewjm2b / IMG_20130403_132418.jpg
Thanks in advance.
Got it
Finally rooted it! I've spent hours with this phone. I'll tell the process here soon.
Sweet, I've been trying to root my Alps MTK6589 but same problem. Eagerly awaiting your post about how you've done it!
Narathan said:
Sweet, I've been trying to root my Alps MTK6589 but same problem. Eagerly awaiting your post about how you've done it!
Click to expand...
Click to collapse
I also look forward to a description of root Alps MTK6589
I need root this phone too
blakeyed said:
Finally rooted it! I've spent hours with this phone. I'll tell the process here soon.
Click to expand...
Click to collapse
expect news and tell us how you did it
I have posted it in http://forum.xda-developers.com/showthread.php?p=40059065
I have found a better way to root any mtk6589 based phone,i ll make a thread soon!
Easy auto root method isa a19q
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
tijsh111 said:
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
Click to expand...
Click to collapse
Thank you!:good::good::good:
Worked with my ASK SP581 HD
Rooted thl w100
tijsh111 said:
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
Click to expand...
Click to collapse
done smoothly like a butter for THL W10..THANKS VERY MUCH
Thank-you
tijsh111 said:
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
Click to expand...
Click to collapse
Thank-you so much, you've helped me greatly
Recovery
Very usefull guide, thank you!
But how can I install TWRP or Clockworkmod recovery??
thanks again
Root the Lava ETab Xtron
The ETab Xtron is a budget Android tablet marketed by Indian mobile phone maker Lava Mobiles. It features a 7-inch display (1024 x 600), a 1.5GHz Cortex A9 processor coupled with 1GB of RAM, 8GB of Internal Storage plus a microSD card slot for expansion, 2MP front facing camera, and Android 4.1.1 Jelly Bean on board. If you've been looking for an easy root method for this device, you can refer to our step by step guide below. Root is required to gain access to system files, which can then be modified replaced to open up additional functionality or tweak the system performance. It is also required to run certain specialized apps which read/write to your core file system like SetCPU or Titanium Backup. This root method is based on XDA Recognized Developer CLShortFuse's Universal Super One-Click Root tool.
Downloads:
Super One-Click Tool -shortfuse.org :good:
Microsoft .NET framework 2.0 or higher
Instruction:
How to Root the Lava ETab Xtron
Download the Super-One Click Root package. Unzip the package to your desktop
On your device, go to Settings > Developer Options and enable USB Debugging
Also go to Settings > Storage > Options > USB Computer connection and change it from MTP to Mass Storage
Remove the external SD card on your device, if you've added one
Connect your phone to your PC via the OEM supplied USB cable. Wait till Windows finishes setting up the drivers
Right-click the Super one-click Root exe file in the SuperOneClick folder you extracted in Step 2, and select Run as Administrator
Click the Driver Check button in SuperOneClick. You should ideally get a No Issues Found response. If not, you need to check whether you have installed the drivers correctly
Click the Root button and sit back and relax while the tool does its thing
Follow on-screen instructions as an when they come up in the SuperOneClick window, and click Yes to all the prompts
Your device may reboot multiple times during the rooting process. Do not touch or interrupt anything
Once Super One-click has finished rooting the device, you will see the status in the tool window & you can disconnect your phone and reboot it.
Install root checker and click verify.(it will show congratulation you have root access)
That's it. You now have full root access on your Lava ETab Xtron tablet. Enjoy your rooted device and may the force be with you .!
HIT LIKE :good: :good: :good: :good:
I bought this Tab recently. But I cant find drivers for this tab.
I tried connecting the Tab to my laptop with USB debugging on, but the windows doesnt install the drivers automatically.
It searches but fails to identify f the drivers for the device.
Can somebody you help me out with the drivers please...
shane582 said:
I bought this Tab recently. But I cant find drivers for this tab.
I tried connecting the Tab to my laptop with USB debugging on, but the windows doesnt install the drivers automatically.
It searches but fails to identify f the drivers for the device.
Can somebody you help me out with the drivers please...
Click to expand...
Click to collapse
Install moborobo in your laptop and connect tab and the driver will be automatically installed. (Internet required)
helloansuman said:
Install moborobo in your laptop and connect tab and the driver will be automatically installed. (Internet required)
Click to expand...
Click to collapse
Did anyone tried it with positive result??
Anthrax said:
Did anyone tried it with positive result??
Click to expand...
Click to collapse
Yes bro successfully done by me. or you can try Wondershare MobileGo or use MobileEdit or use any android PC suite.
the root with one click application gets not responded....
Anthrax said:
the root with one click application gets not responded....
Click to expand...
Click to collapse
Same here..
root for lava xtron plus
Please tell me how to root lava xtron plus..
Nand Storage
My lava etab xtron+ recognizes nand flash as sd , how can i make it to use the sd card to install apps and not the nand flash without root.
Please please please tell me how to root lava xtron +
It is 4.2.2 jellybean
rooting LAVA E-TAB XTRON+
gwenmillett said:
Please please please tell me how to root lava xtron +
It is 4.2.2 jellybean
Click to expand...
Click to collapse
first of all , I am not responsible if it bricks your device.
to root lava etab xtron+ , you will have to have its drivers
1) Install moborobo and it will download the required drivers for you.
2)In your tablet go to in Settings , find developers option and turn it on and enable USB Debugging.
3)before connecting it to your PC( it works only windows ) go into the tab's settings again and click on storage.In it you will find 3 dots in top right hand corner.Click on it and USB computer connection will be there.In it select the storage to Mass storage.
4)Connect it to your PC and let moborobo download the drivers.
5)Now install the software from the attached file given in this post.
6)It is a Chinese software so click yes on all prompts during installation.
7)after it is installed it will open.
8)wait for it to detect your device and then there will be a window on the right hand side showing the statistics of your device.
9)in last statistic it should look like this: Root?? ON>>nE .
10)then click on option ??Root.
11)It will have a prompt showing a tick mark in the center and 3 rectangles below of the colour of blue , red and green.Click on the green box.
12)Then the tool will start its work.DO NOT INTERRUPT ANYTHING AND CLICK YES( green colour means yes ) TO EVERY PROMP IF IT ASKS YOU.
13)It will restart your device and an app called superuser will be pre-installed.I recommend you downloading another superuser.
14)download root checker to check whether the root was successful otr not.
Worked on my LAVA ETAB XTRON+
Noteo not turn on usb connection.
Note:Remove your external SD card before rooting.
Note:If your device detects Nand flash as sd card then no need to disconnect it.
Click like if I helped you
rooting LAVA E-TAB XTRON+
gwenmillett said:
Please tell me how to root lava xtron plus..
Click to expand...
Click to collapse
Hi gwenmillett , i am going to tell u the method i used for rooting my lava etab xtron+
Before starting i would say that i am not responsible if it bricks ur device ( it should not happen at all if u follow all steps properly )
Now , first u should install all the drivers needed to root this device.
For this,
1)Download and install moborobo
2)Before plugging ur device into the PC using a usb cable configure the device in following ways:
a)go in settings>storage>click on 3 dots in top right hand corner adn open that section and select "mass storage".
b)go in settings>developer options>turn usb debugging on.
now back to installing drivers,
3)now plug ur device and force install the driver moborobo is providing.
Now ur "device" is ready to be rooted.
Configuring the PC:
1)download and install the given software ( sorry for not being able to provide screenshots for installing ).
2)when it detects ur device there will be something written like this in the bottom right corner : ??ROOT : ONE or whatever but it must be in green colour.That means that ur device can be rooted.
3)now on the center of the software it will be written root of green or blue colour. Click on that.
4)Now click the bottom right corner of the software ( green means yes and any yes button should be on right side ).
5)now it should start rooting ur device.
6)after 5 mins or so ur device will restart and it will be rooted.
NoteO "NOT" TURN USB STORAGE "ON".
Note:IT MAY INSTALL SOME USELESS SOFTWARE ON UR PC AND TAB , BUT IT CAN BE UNINSTALLED.
Note:IT WILL INSTALL SUPERUSER , WHICH IS OUTDATED BUT BEFORE DOWNLOADING OTHER SUPERUSER APP , USE THE ONE PRE-INSTALLED TO UPDATE SU BINARY.
Worked for lava xtron+ jb7+
Mohd.Anas said:
Hi gwenmillett , i am going to tell u the method i used for rooting my lava etab xtron+
Before starting i would say that i am not responsible if it bricks ur device ( it should not happen at all if u follow all steps properly )
Now , first u should install all the drivers needed to root this device.
For this,
1)Download and install moborobo
2)Before plugging ur device into the PC using a usb cable configure the device in following ways:
a)go in settings>storage>click on 3 dots in top right hand corner adn open that section and select "mass storage".
b)go in settings>developer options>turn usb debugging on.
now back to installing drivers,
3)now plug ur device and force install the driver moborobo is providing.
Now ur "device" is ready to be rooted.
Configuring the PC:
1)download and install the given software ( sorry for not being able to provide screenshots for installing ).
2)when it detects ur device there will be something written like this in the bottom right corner : ??ROOT : ONE or whatever but it must be in green colour.That means that ur device can be rooted.
3)now on the center of the software it will be written root of green or blue colour. Click on that.
4)Now click the bottom right corner of the software ( green means yes and any yes button should be on right side ).
5)now it should start rooting ur device.
6)after 5 mins or so ur device will restart and it will be rooted.
NoteO "NOT" TURN USB STORAGE "ON".
Note:IT MAY INSTALL SOME USELESS SOFTWARE ON UR PC AND TAB , BUT IT CAN BE UNINSTALLED.
Note:IT WILL INSTALL SUPERUSER , WHICH IS OUTDATED BUT BEFORE DOWNLOADING OTHER SUPERUSER APP , USE THE ONE PRE-INSTALLED TO UPDATE SU BINARY.
Click to expand...
Click to collapse
Thanks working, very easy to do:good::good::good::good::good::good:
Will this method work for lava mg7 tab?
dalemayson said:
Will this method work for lava mg7 tab?
Click to expand...
Click to collapse
i got a genric cwm recovery on internet for rockchip 3066 . i have flashed it to my lava xtron plus tab from rk flash tool after that my device is not starting ... not turning on ... is this a hardware problem
---------- Post added at 06:27 AM ---------- Previous post was at 06:23 AM ----------
plz reply anyone ... if i have to go to service center or any other because my device is not going even in bootloop .... is my device have a hardware problem ... i have tried all method of turning on ... even it is not going in recovery mode ... i have using reily rom but now my device is tottaly dead
Roo lava xtron plus
U CAN root lava etab xtron plus easily via rootmaster app , just search it on google and run , your tablet will b rooted , i have tried succesfully , without any hard work
i got adb , but got stuck on verifying root compatability in one click root
Mohd.Anas said:
first of all , I am not responsible if it bricks your device.
to root lava etab xtron+ , you will have to have its drivers
1) Install moborobo and it will download the required drivers for you.
2)In your tablet go to in Settings , find developers option and turn it on and enable USB Debugging.
3)before connecting it to your PC( it works only windows ) go into the tab's settings again and click on storage.In it you will find 3 dots in top right hand corner.Click on it and USB computer connection will be there.In it select the storage to Mass storage.
4)Connect it to your PC and let moborobo download the drivers.
5)Now install the software from the attached file given in this post.
6)It is a Chinese software so click yes on all prompts during installation.
7)after it is installed it will open.
8)wait for it to detect your device and then there will be a window on the right hand side showing the statistics of your device.
9)in last statistic it should look like this: Root?? ON>>nE .
10)then click on option ??Root.
11)It will have a prompt showing a tick mark in the center and 3 rectangles below of the colour of blue , red and green.Click on the green box.
12)Then the tool will start its work.DO NOT INTERRUPT ANYTHING AND CLICK YES( green colour means yes ) TO EVERY PROMP IF IT ASKS YOU.
13)It will restart your device and an app called superuser will be pre-installed.I recommend you downloading another superuser.
14)download root checker to check whether the root was successful otr not.
Worked on my LAVA ETAB XTRON+
Noteo not turn on usb connection.
Note:Remove your external SD card before rooting.
Note:If your device detects Nand flash as sd card then no need to disconnect it.
Click like if I helped you
Click to expand...
Click to collapse
Adb installed
finally rooted
thnxs guys finally i had rooted it .
Zds setup is awesome
Now please help me to install the best rom and cwm for xtron plus
Thank u so much
Please help with super user ,rom and cwm also.
Please tell me what to do next . . . New to this
I want to install rom,cwm . . . .
Please help
Please help to install cwm
Please help me to install cwm on jb7+. I had some problems after rooting .some games are lagging which played wonderfully b4 rooting. . . . .
Please help me guys . . . . . . . .
PLZ HELP
mine show this what should i do??
How to root Hitech Amaze S200 (2.3.5/4.0.1) Kernell 2.6.35.7
By Pijush Kanti Sen,XDA developers
WARNING!! Do at your own risk!
Chinese Superuser app.
NEED:
1.usb cable
2.computer
3.Hitech Amaze S200 (your phone)
4.presence of mind..
Preparation:
1.Enable Application>Development>USB Debugging
2.Enable Application>Unknown Sources
FILEs NEDDED (download this and install to pc)
1.Download ADB drivers for your device installed on your pc (I used Win7 You may use Win 8/Vista or the Linux distro of your choice)
2.Download and Extract Vroot.
3.Moboro for pc..(Optional)
STEPS:
1. Run adb driver connect ur phone to pc then click install ....
2.Connect ur phone...wait for auto install drivers..
3. OPTIONAL Run moboro .. connect ur phone..then minimize it!
4. Run > Vroot > Root.exe -Connect ur phone!!
(You'll see some chinese text)
A. turn off ur phone..and wait for vibrate.. unplug phone
B. go to recovery mode by long press power button + volume up.. wait for recovery mod .. connect with ur PC/Laptop
C. Run Vroot -- Click the large button on the lower Right...
5. Phone will restart. (Do not unplug the phone to pc)
Congratulations! You are now rooted.:good:
You will see a Chinese superuser app installed.
to make sure .. download root checker from playstore
If you like this!
pls ... like this!!!
I worth it
*******#####******** Don't copy this thread***********####**********
help
pijushsen94 said:
How to root Hitech Amaze S200 (2.3.5/4.0.1) Kernell 2.6.35.7
By Pijush Kanti Sen,XDA developers
WARNING!! Do at your own risk!
Chinese Superuser app.
NEED:
1.usb cable
2.computer
3.Hitech Amaze S200 (your phone)
4.presence of mind..
Preparation:
1.Enable Application>Development>USB Debugging
2.Enable Application>Unknown Sources
FILEs NEDDED (download this and install to pc)
1.Download ADB drivers for your device installed on your pc (I used Win7 You may use Win 8/Vista or the Linux distro of your choice)
2.Download and Extract Vroot.
3.Moboro for pc..(Optional)
STEPS:
1. Run adb driver connect ur phone to pc then click install ....
2.Connect ur phone...wait for auto install drivers..
3. OPTIONAL Run moboro .. connect ur phone..then minimize it!
4. Run > Vroot > Root.exe -Connect ur phone!!
(You'll see some chinese text)
A. turn off ur phone..and wait for vibrate.. unplug phone
B. go to recovery mode by long press power button + volume up.. wait for recovery mod .. connect with ur PC/Laptop
C. Run Vroot -- Click the large button on the lower Right...
5. Phone will restart. (Do not unplug the phone to pc)
Congratulations! You are now rooted.:good:
You will see a Chinese superuser app installed.
to make sure .. download root checker from playstore
If you like this!
pls ... like this!!!
I worth it
*******#####******** Don't copy this thread***********####**********
Click to expand...
Click to collapse
Please can you explain it briefly.
Where and how to download adb drivers,vroot and moboro and for pc or mobile?
Same question here...plz provide link for the above apps
Need Root Method for Hitech Amaze S3 Kitkat
Sir,
Please share a method to root the Hitech Amaze S3 Android Mobile Phone....
Please see the beow link...
http://www.hitech-mobiles.com/s3/
Thanks in advance....
If you have kitkat os then try out towelroot. In case of jellybean try framaroot. Barahir exploit.
guys this is sai teja
the most simplest way of rooting is here
firstly download unlock root
moborobo
and perfectly install all the drivers
now next step connect ur mob in usb debugging mode
thts it
open unlock root
click on root
select ur device and wait few seconds
after rebooting device the mob is rooted
credits : to me for exploring and descovering rooting guide
unlock root devs for making a nice application
and moborobo