Q&A for [ROM][LB/UB]Envi-Rom Stock+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LB/UB]Envi-Rom Stock+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
If coming from existenz with unlocked boot loader can I just wipe and flash and still have root and recovery?
bikenerd101 said:
If coming from existenz with unlocked boot loader can I just wipe and flash and still have root and recovery?
Click to expand...
Click to collapse
Yes if you follow the installation steps correctly !
To avoid bootloops and that kind of jokes.
bikenerd101 said:
If coming from existenz with unlocked boot loader can I just wipe and flash and still have root and recovery?
Click to expand...
Click to collapse
Root is a system thing, my rom is Pre-Rooted (sometimes fails)
Recovery, this depends on how you installed Recovery, you may have to reinstall the Nut's Dual Recovery if you used that
wipe Cache and Dalvik when installing, nothing else is needed to be wiped, if you bootloop then wipe data
Hi Envious. Thanks for all the hard work and contributions.
I have. 314 stock rooted on D6903 n SGP521. I'm sure D6903 will work flawlessly with your rom. If I want to flash it on SGP521, any considerations or it can't be done?
fribriz said:
Hi Envious. Thanks for all the hard work and contributions.
I have. 314 stock rooted on D6903 n SGP521. I'm sure D6903 will work flawlessly with your rom. If I want to flash it on SGP521, any considerations or it can't be done?
Click to expand...
Click to collapse
this Rom will only Work on D6503 and D6502, no other devices at this current point in time
Apologies. My device is D6503 . Must be the early morning commute that muddled my reply. So it won't work on SGP521. Thank you.
Rom on D6502
Hi. Can i flashed this Rom on D6502 model?
FanFM said:
Hi. Can i flashed this Rom on D6502 model?
Click to expand...
Click to collapse
If you can find a modem flashable zip for D6502 then flash that after flashing this rom
If not then this rom will only work on D6503 model
flash ligt
Hello the of torgeincrease /flash light,how it works?
Best Sebastian
I cannot install Xposed on the ROM, I installed a root checker app and it says I have root but no apps with root access can mount system as writable. And I tried flashing an app to system (Cerberus app) via recovery and it's not installed.
How to I check if I have a full working root?
lywyn said:
I cannot install Xposed on the ROM, I installed a root checker app and it says I have root but no apps with root access can mount system as writable. And I tried flashing an app to system (Cerberus app) via recovery and it's not installed.
How to I check if I have a full working root?
Click to expand...
Click to collapse
Not sure, i recoment reflashing root after flashing this rom, it seems to fail to work by its self
Envious_Data said:
Not sure, i recoment reflashing root after flashing this rom, it seems to fail to work by its self
Click to expand...
Click to collapse
Done that with plain CWM (via NDR utils). Titanium Backup works but Xposed fails to mount. That said Titanium will only do certain things, it cannot remove system apps which may be mounting issue. I'm on V1PRE2
---------- Post added at 11:19 AM ---------- Previous post was at 10:47 AM ----------
lywyn said:
I cannot install Xposed on the ROM, I installed a root checker app and it says I have root but no apps with root access can mount system as writable. And I tried flashing an app to system (Cerberus app) via recovery and it's not installed.
How to I check if I have a full working root?
Click to expand...
Click to collapse
SONY RIC killer solved it. Was mention in one of the Envi ROM threads. ROM working great now, hats off for the speed and smoothness it brilliant!
Im on 4.4.4 stock, so what i have to do to install this rom. I have done nothing, its completely stock. I havent unlcoked any bootloaders or done anything.
EDIT: i get bootloop, when i flash .314 , but when i revert flash to .167 everythings allright.
i can confirm that after instaling V1 version whitch is 3.12 based ,the battery drain is normal and actualy better than .167...the only think that bothers me is the update notification anythinig else is smooth and silky.i had 98 percent battery and i played 2-3 hours of fruit ninja and made some calls and was surfing the internet with wifi connected and after 22 hours of on battery i have 63 percent remaining so i can say that battery drain is not a issue for me...also im using this rom now for 5 days since is released and its very good.i think that ppl should use rom atleast for few days and than see if battery drain is happening..as i know the battery has to be calibrated after instaling fresh rom. cheers guys
cocagenda2 said:
i can confirm that after instaling V1 version whitch is 3.12 based ,the battery drain is normal and actualy better than .167...the only think that bothers me is the update notification anythinig else is smooth and silky.i had 98 percent battery and i played 2-3 hours of fruit ninja and made some calls and was surfing the internet with wifi connected and after 22 hours of on battery i have 63 percent remaining so i can say that battery drain is not a issue for me...also im using this rom now for 5 days since is released and its very good.i think that ppl should use rom atleast for few days and than see if battery drain is happening..as i know the battery has to be calibrated after instaling fresh rom. cheers guys
Click to expand...
Click to collapse
As said it depends on your region/mobile carrier
i installed V1PRE-RELEASE but i miss the FM radio. is there any original Xperia FM radio app or flashable (to flash in recovery) that works under V1PRE-RELEASE ?
What does "removed Viper4Android libs " mean in the changelog of V2? I have Viper4Android installed since V1 will flashing V2.2 affect the app whatsoever? Thanks and great rom btw keep up the good work!
Avaensis said:
What does "removed Viper4Android libs " mean in the changelog of V2? I have Viper4Android installed since V1 will flashing V2.2 affect the app whatsoever? Thanks and great rom btw keep up the good work!
Click to expand...
Click to collapse
You have 3 options when you install viperfx4android so i removed the Libs n binarys n all for ViperFX so you can choose what install you want to use
Battery savng, etc, etc etc etc
fastest stock based rom
well the title says it all...i have used this rom for many times even the older versions and as far as i know i can confirm that even after few weeks usage the rom is stable and fluid...actualy i can say ,that is definetly as fast as the aosp , becouse i tryed every rom possible for z2 and yes this one is really the best at speed and stability compairing to stock rom or other custom ones .and also im very alergic to lags and stuff like that so yea i know when i say fast its fast
Related
Im using the stock rom GINGERBREAD.ZSKF4 and i have rooted my phone without flashing any roms.
1. If i flash other roms will i lose my root access?
2. i have deleted some useless apk files like AP mobile that sort of things by using rootexplorer, will it appear again if i use another rom?
3. recently my market doesnt seem to work it keeps saying download unsuccessful whenever i update or download sth! any ideas?
and what is the most updated version of litening rom?
Helpppp guysssss
anyone here to help?
hkgdllm said:
Im using the stock rom GINGERBREAD.ZSKF4 and i have rooted my phone without flashing any roms.
1. If i flash other roms will i lose my root access?
2. i have deleted some useless apk files like AP mobile that sort of things by using rootexplorer, will it appear again if i use another rom?
3. recently my market doesnt seem to work it keeps saying download unsuccessful whenever i update or download sth! any ideas?
Click to expand...
Click to collapse
slow down it takes tym to gt a reply..
anyhow i m here
1) All custom roms are rooted so u will not loose ur root access..
2)All rom developers have listed the samsung apps deleted by them,and they usually give it as an addon pack if some people want.
See it what apps they have removed , if the app u want is deleted good for u or u have to deleted it manually as u have done in the past..
Alternatively u can delete it from the rom before flashing too... if u are experienced.
3)This is a kernel related issue try changing/flashing a new kernel the problem should get solved..
i want to flash the litening rom, what is the newest version available?
my kernel is KF4 but most of the roms i found are for other kernel versions, how do i solve this?
The latest version of litening ROM is here:
http://forum.xda-developers.com/showthread.php?t=1095274
but can i suggest Cognition as i have used both and i do prefer cognition:
http://forum.xda-developers.com/showthread.php?t=1124396
Your kernel doesnt matter - each ROM usually includes their own kernel and when you flash the new rom the kernel from that ROM will also be applied to your phone at the same time
Is cyanogenmod for gs2 released?
And whar is the difference btwn different ketnrls? say ke7 is better or kf4 is better?
hkgdllm said:
Is cyanogenmod for gs2 released?
Click to expand...
Click to collapse
Yes but no fully functional. The team has done a great job though and hats off to them.
Dear reader,
I've currently been using Cyanomod for 2.3.7 Gingerbread.
My phone is rooted and everything (which took a little while )
Everything is running perfectly fine, but i would like to update my phone to android 4.0+ (whatever the lastest compatible version might be)
How should i go about this?
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
TJ007 said:
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do i need to re-root my phone when i install a new Rom? Or should i just install it through recovery?
Rom's are pre rooted (expect stock, stock BASED roms ARE pre-rooted), once you've installed the rom through cwm, it will be rooted and ready.
cashtecz said:
Dear reader,
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
mikii100297 said:
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
Click to expand...
Click to collapse
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
nh1402 said:
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
Click to expand...
Click to collapse
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
sarangkunte05 said:
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
cashtecz said:
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
Click to expand...
Click to collapse
The fastest way to flash a kernel is to use the program called flashtool, click on the lightening bolt, select Fastboot mode, then select kernel to flash find the kernel you want to flash and it should be done within literally 2 seconds. once Flashtool gives you the all clear, disconnect your phone from usb, restart phone, and there you go, the old kernel will be overwritten, and so will that kernel's cwm version, with the one from the new kernel.
Try FXP138
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
i would also suggest you to try FXP138 which is CM9.1 Android 4.0.4, Its pretty smooth and the brightness bug seems to be resolved:laugh: in FXP138 here's the link http://forum.xda-developers.com/showthread.php?t=1409053
Also here is a link for ROM comparison - http://forum.xda-developers.com/showthread.php?t=1843741
Hope this helps!
FXP138-cm-9-20120916-UNOFFICIAL-urushi
cashtecz said:
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
Click to expand...
Click to collapse
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
ramakrishnanjk said:
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
Click to expand...
Click to collapse
Nevermind, i figured it out!
cashtecz said:
Nevermind, i figured it out!
Click to expand...
Click to collapse
Hey,
Everything is installed and running, however i am wondering about just one thing.
Whenever i reboot my phone i get, right after imputting my sim code, a Unlock Network SIM message.
What is this and how can i solve it?
Regards,
(oops just realized i made a double post, apologies!)
Hi guys, this is the latest Lollipop ROM rolled out by LG for the international G Pad 8.3.
It's the corean update but works just fine with mine and i hope also with your.
INFO:
1- You can flash it with the TWRP like every Rom out here, i used the bumped TWRP in the original devs thread;
2- The kernel is stock, i only set selinux to permissive because in my works for the G3 i've seen that it's the only way to avoid permission issues;
3- it's bumped so doesn't need nothing special, just flash it in TWRP like i said above;
4- You can dirty flash over the stock 4.4.2 ROM, i made it and had no issues at all.
5- If you are asking why you should flash this instead of the kdz, the answer is that with the "kdz way" you will upload your Bootloader too and you will lost the possibility to flash the twrp and any custom kernel since the new BL patch the exploit used by Bump.
DOWNLOAD
https://www.androidfilehost.com/?fid=95916177934553953
ROOT:
The rom is unrooted, to root it just flash this in recovery:
http://download.chainfire.eu/supersu
Credits:
- Team Codefire for the Bump exploit;
- Chainfire for the root stuff;
reserved
Thanks very much once again ?
Flashed this and everything seems ok so far. Supersu didnt work for me in the first flash with ROM, but when i got back into recovery the second flash worked. Root seems to be pretty strong thus far. I am going to run this for the next few days and see how stock Lollipop is working. Thanks again for this!
Ran for a couple minutes and noticed vibration doesn't work. Do I need to enable something? Pretty solid so far!
Edit: You have to reboot for vibration
Looking great for me so far ,no issues,though I have a lot of setting up to do still ?
Hello,
Very good rom
bye bye kit kat and external sd storage problems
Thank you very much for this rom
Fantastic! Thanks for the work and sharing.
Just flashed it dirty and seems to work flawless.
Major improvements over 4.4 are the "recents apps" button and being able to switch user without having to use hard power button.
Thank you for sharing this!
Can anybody answer me what's with battery, is it worse than on KitKat? And is gamma fixed?
Thank you one again! Cheers!
Sweet! Downloading right now, thank you!!
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
fazbender said:
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
Click to expand...
Click to collapse
Ok then
is it OK to flash over aosp 5.1? (with full wipes of course)
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
i think so, just take a backup in case something go wrong
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
I did. Full wipe worked fine.
Only issue I've noticed so far is the lockscreen weather doesn't seem to work.
I set it up as you would with the g3 but no luck.
Anyone managed to get it working?
For reference, I started with a completely wiped /formated tablet.
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
rom is running very smooth so far without any problems, living in germany. much faster as KK relase.
thank you dev!
Skin yoy are awsome!
Glad to see you here to.. Lg g3 owner mate congrats and keep doing your thing.... Thanks once again you great developer!!!!
renatohm said:
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
Click to expand...
Click to collapse
Yes.. Thats what i mean. But if you are on aosp rom you must wipe.
And with dirty flash you will not lose anything
Sent from my SM-N910F using XDA Free mobile app
so I got this galaxy s5 (free) to replace the S4 I had.. I'm on AT&T and the S5 is a T-Mobile device.. I unlocked and am currently using on AT&T without any issues.. I tried Cyanogenmod 12 on it.. had way too many Bluetooth music issues.. so I switched back to a rooted t-mobile stock.. which is terrible.. bluetooth music works great but everything is is painfully slow.. so I want to find a good fast custom rom (that also has proper bluetooth music support).. With so many device versions and so many custom roms I'm just a bit perplexed.. I found some that are debloated stock roms which seem like that would be good. but I'm just a bit confused on what parts I need to have as "t-mobile g900t" and which parts I don't have to have that way? so yeah this is a bit of a newbie question (even though I have run 4 or 5 custom roms in the past (original galaxy s and my s4 both had custom roms). .but those were always at&t devices on at&t network.. so was an easier choice..
at any rate.. looking for some tips on how to best find the right rom.. Would love to do this today/tomorrow.. avoid messing with the phone during the work week..
Thanks in advance!!
Gary
Try the latest stock ROM for the phone. Many of us were having issues with lag with prior 5.1.1 ROMS. The latest ROM has fixed all these issues. Very snappy.
i feel like i remember seeing bluetooth/audio fixes & updates in the CM13 nightly changelogs, you also didnt specify which CM 12 you installed... the last 12.1 snapshot from october or the last nightly from december?
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
much improved deep sleep battery means crap & full of bugs? i'm over a week behind on nightlies & there arent that many bugs... http://www.cmxlog.com/13/klte/ things are improving all the time, only CM 12.1 is stuck... but the last december nightly isnt buggy either
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
gpinkham said:
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
Click to expand...
Click to collapse
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Click to expand...
Click to collapse
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
gpinkham said:
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
Click to expand...
Click to collapse
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....]
Click to expand...
Click to collapse
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
gpinkham said:
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
Click to expand...
Click to collapse
Get any phone info app and check and see if your bootloader ends in pe1 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using XDA-Developers mobile app
S.N [user=2501176 said:
@.k.[/user]3;67525688]Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using
I'm sorry you are correct I meant pe1 pe3 is for the Note 4. I've been working with a friends note 4 past few days. Thanks for catching my error . Hate giving wrong advice... original post edited...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.[/URL]
Click to expand...
Click to collapse
thanks for sticking with me on the all the newbie questions.. bootloader version reported as G900TUV1FOG6.. later in the list it shows Latest Firmware: G900TUVUGPE1/G900TTMBGPE1/G900TUVU1GPE1.. so at first I was thinking I was ok.. but that second entry had me wondering.. (dang.. just noticed this was never submitted (from 6/28).. oh well)..
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
gpinkham said:
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
Click to expand...
Click to collapse
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Click to expand...
Click to collapse
OK.. you may be right.. I downgraded TWRP to 3.0.0 and the install started working fine.. but now the reboot into Phoenix has been going for about 35 mins.. I know it can take some time but that seems extreme.. will wait a bit longer and if it doesn't work I'll try the steps you listed above..
thanks again
Gary
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware.
Click to expand...
Click to collapse
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
gpinkham said:
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
Click to expand...
Click to collapse
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
gpinkham said:
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
Click to expand...
Click to collapse
Gary look in this general section for the post that instructs you how to install factory mm. Follow the guide. Google to see how to install factory tar files using Lunix . I'm guessing my instructional writing skills leave something to be desired lol . Once you have the factory mm up and running install Twrp flash superuser reboot. Than reboot into recovery flash phoenix rom. Good good
Sent from my SM-G935F using XDA-Developers mobile app
I performed a TWRP installation.
Now my phone is stuck on MI.com unlocked state
any way I can do something?
same here
Never mind, I installed the AOSP rom and it finally came up. I also installed the lazy flasher which might have fixed the issue
Never mind, lets close this Thread, I fixed the issue by installing the lazy flasher, Tried OREO roms, AOSP roms, DotOne, but no luck, all roms are unstable right now.
Restored MIUI back living with high Ram usage and lots of bloatware
viikram.siingh said:
Never mind, lets close this Thread, I fixed the issue by installing the lazy flasher, Tried OREO roms, AOSP roms, DotOne, but no luck, all roms are unstable right now.
Restored MIUI back living with high Ram usage and lots of bloatware
Click to expand...
Click to collapse
How you restored Miui please tell me the steps? thanks alot
Mohamedselim said:
How you restored Miui please tell me the steps? thanks alot
Click to expand...
Click to collapse
Just download official rom. Zip znd flash it from twrp… that way u keep twrp… u can aslso use mi flasher but u xill loose twrp