Related
Few months ago, there was a post on XDA:
http://forum.xda-developers.com/showthread.php?t=718952
and a link to:
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
They explain how to install and run Ubuntu on Nexus One.
But a lot of people got problems when running script bootubuntu and ubuntu.sh, and I was one of them.
After Cyanogen Mod 6.0 was released, I could successfully run Ubuntu according to given instructions, but later I discovered the two scripts (ubuntu.sh and bootubuntu) don't always work, and I found them very complex and unnecessary statements can be removed.
Since few months ago I've been refining the two scripts to make them able to boot Ubuntu with less likelihood to get error. I thought I would like to share my findings to everyone interested.
Here are some reasons why it's useful to have Ubuntu on Nexus One
1. Fully functional web browser Firefox
2. Fully functional office suite OpenOffice
3. Fully functional Linux terminal with lots of ultilities
4. Fully functional image manipulation tool Gimp
5. Ability to run lots of useful native Linux programs
6. Python, gcc, g++..
I'll talk about my findings in next few posts.
Post #2: simplify ubuntu.sh, remove unnecessary script files
Post #3: simplify bootubuntu, forcibly umount
Post #4: how to shutdown Ubuntu properly if terminal application was closed by Android
Post #5: a little script which should be run before exiting from Ubuntu
Post #6: how to start GNOME desktop (instead of LXDE) and get correct keyboard mapping
Post #7: a possible solution to loop device's "resource or device busy" error
About my Nexus One:
bought on 2nd March
Cyanogen Mod 6.0
IntersectRaven HAVS CM CFS 1020 kernel
Busybox 1.17
Radio 5.0.8
Gapps hdpi 20101020.1
Please don't hesitate to tell me if I made any mistake, I'm a Linux beginner because I taught myself Linux, my University will teach Unix next semester.
Attachment: ubuntu_scripts.zip
contains all modified scripts.
Finding #1:
In original Zip package, there are five scripts, but only two of them are actually used to install and boot up Ubuntu.
fsrw, mountonly, unionfs are not necessary to install and boot ubuntu, thus their reference can be removed from ubuntu.sh
Here is my simplified version of ubuntu.sh
#-------------------------------
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
rm -f /system/bin/bootubuntu
rm -r -f /data/local/ubuntu
cp -f bootubuntu /system/bin
cd /
echo "Type 'bootubuntu' to boot Ubuntu"
#-------------------------------
Simplified ubuntu.sh removed unnecessary statements to reduce risk of error.
Also I discovered:
Files in /sdcard/ubuntu can not be chmod, and it's unnecessary to chmod 4777 to them.
chmod 4777 /system/bin/* will cause some Android softwares to malfunction (e.g. Orbot), also it *possibly* cause some roms to fail to boot up next time (CM6.0)
Finding #2:
Here's my simplified bootubuntu script, there are minor changes to script flow and removed all unnecessary statements:
#-------------------------------
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
echo "SETTING VARIABLES"
export bin=/system/bin
export mnt=/data/local/ubuntu
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
if [ ! -d /data/local/ubuntu ]
then
mkdir /data/local/ubuntu
fi
echo "SETTING UP LOOP DEVICE"
losetup /dev/block/loop1 /sdcard/ubuntu/ubuntu.img
echo "MOUNTING"
mount -t ext2 /dev/block/loop1 /data/local/ubuntu
mount -t devpts devpts $mnt/dev/pts
mount -t proc proc $mnt/proc
mount -t sysfs sysfs $mnt/sys
echo "SETTING UP NETWORK"
sysctl -w net.ipv4.ip_forward=1
echo "nameserver 208.67.222.222" > $mnt/etc/resolv.conf
echo "nameserver 208.67.220.220" >> $mnt/etc/resolv.conf
echo "127.0.0.1 localhost" > $mnt/etc/hosts
echo "Brought to you by NexusOneHacks.net and the open source community! "
chroot $mnt /bin/bash
echo "UMOUNTING"
umount -lfr $mnt/dev/pts
umount -lfr $mnt/proc
umount -lfr $mnt/sys
umount -lfr $mnt
losetup -d /dev/block/loop1
#-------------------------------
and it forcibly,lazily,read-only-if-failed umount $mnt, thus losetup -d will less likely to fail and eliminate the problem when booting ubuntu second time.
Finding #3:
If terminal application is terminated automatically by Android system, in this situation, the Ubuntu is not properly umounted.
Thus we change ubuntu.sh into:
#------------------------------
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
rm -f /system/bin/bootubuntu
rm -f /system/bin/exitu
rm -r -f /data/local/ubuntu
cp -f bootubuntu /system/bin
cp -f exitu /system/bin
cd /
echo "Type 'bootubuntu' to boot Ubuntu"
#------------------------------
and we create a new script named "exitu" in sdcard/ubuntu directory:
#------------------------------
export mnt=/data/local/ubuntu
echo "UMOUNTING"
umount -lfr $mnt/dev/pts
umount -lfr $mnt/proc
umount -lfr $mnt/sys
umount -lfr $mnt
losetup -d /dev/block/loop1
#------------------------------
remember to run "sh ./ubuntu.sh" to copy new exitu script into /system/bin.
Then whenever you went back to terminal, found Ubuntu terminal is gone, simply type exitu (remember to be su first) to exit ubuntu, then bootubuntu again to enter ubuntu terminal. It's harmless to execute exitu multiple times to ensure $mnt is umounted successfully.
Sometimes exitu still can not successfully remove loop1 assignment with /sdcard/ubuntu/ubuntu.img, but seems like it doesn't really matter, ubuntu still can boot up successful even loop1 was not unassigned successfully
Finding #4:
To reduce likelihood of getting "device or resource busy" error when removing loop device assignment, it's good to have this script in your Ubuntu, and run the script before exiting from Ubuntu:
#-------------------
export USER=root
vncserver -kill :1
vncserver -kill :2
sudo reboot
sudo halt
#-------------------
(remember, the script should be in your Ubuntu's file system, not your android's file system!)
run the script before you exiting from Ubuntu, this will greatly reduce likelihood of getting device or resource busy error when exiting.
Finding #5:
For those of you who prefer to enter GNOME desktop manually (no automatically start-up), this script may help, also this script should be able to fix androidVNC keyboard mapping problem:
(this script should be in Ubuntu)
#--------------------
cd /
rm -r -f tmp
mkdir tmp
cd /
export USER=root
export XKL_XMODMAP_DISABLE=1
vncserver -geometry 800x600
#--------------------
regarding the guide:
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
if you would like to enter gnome and not to autostart desktop environment, please don't follow its instruction on making change to /root/.vnc/xstartup and /root/.bashrc
instead, create a script as I mentioned above, and run the script to bring up VNC server, and you will get GNOME desktop in VNC with correct keyboard mapping
Finding #6
If you're constantly getting "device or resource busy" error when mounting loop1 to /data/local/ubuntu, the reason might be caused by Android App2SD (Froyo version), if you have any software installed on SD card, it may cause all loop devices to be busy all the time (even newly created loop device!) And busy loop device can not be mounted, thus generates "device or resource busy" error message.
Most people had the same problem few months ago, when they execute bootubuntu, they get an error saying loop device is busy, and even changing loop device wouldn't help.
Now I think the reason is determined. After uninstalled all applications which are on SD card (or move all of them from SD card to internal storage), the Ubuntu can boot successfully without getting "device or resource busy" error when mounting loop device.
Edit 2010-11-04:
If bootubuntu gets executed before Android loads all app2sd applications, it is possible solves the loop device busy error even with App2SD applications installed. It requires a very perfect timing, today after few experiments on my phone, I worked out a process which can always boot up Ubuntu on my phone:
1. Reboot phone
2. as soon as you enter lock screen, unlock screen
3. quickly go to terminal emulator
4. become su by typing su and enter
5. type bootubuntu and wait (type it fast... practice )
-------------
1-5 must be done before SD "Checking for errors" notification disappears, if you fail to do so.. reboot and try again
------------
6. as soon as SD "Checking for errors" notification disappears, hit enter IMMEDIATELY
Now you should be able to enter Ubuntu terminal.
Do NOT exit from your Android terminal (don't press back or home button), wait 1-2 minutes for Android to load applications on SD card.
Once you reboot your phone, you'll need to repeat the above procedure again to enter Ubuntu successfully.
Also chmod 4777 is horrible from a security point of view. It makes all the system bin files writable by anyone and run with root privileges (setuid root).
Sent from my Nexus One using XDA App
houzuoguo said:
Finding #6
If you're constantly getting "device or resource busy" error when mounting loop1 to /data/local/ubuntu, the reason might be caused by Android App2SD (Froyo version), if you have any software installed on SD card, it may cause all loop devices to be busy all the time, thus loop device can not be mounted to /data/local/ubuntu anymore.
Most people had the same problem few months ago, when they execute bootubuntu, they get an error saying loop device is busy, and even changing loop device wouldn't help.
Now I think the reason is determined. After uninstalled all applications which are on SD card (or move all of them from SD card to internal storage), the Ubuntu can boot successfully without getting "device or resource busy" error when mounting loop device.
Click to expand...
Click to collapse
This is because with Froyo apps to SD android creates an encrypted loopback device for each app on the SD card, so depending on the number of apps on your SD card loop0-7 may be in use. I solve this by using a high loop number with losetup - loop99.
Sent from my Nexus One using XDA App
Use a higher loop device, the best option
It worked for me on loop7, but to be on the safe side, decided to use a higher loop number as suggested, but it requires to create the loop device as it doesn't exists, use mknod:
Code:
echo "SETTING UP LOOP DEVICE"
mknod /dev/block/loop99 b 7 99
losetup /dev/block/loop99 /sdcard/ubuntu/ubuntu.img
Now is working on loop99 too!. The clean up section for both bootubuntu and exitu scripts:
Code:
echo "UMOUNTING"
umount -f $mnt/dev/pts
umount -f $mnt/proc
umount -f $mnt/sys
umount -f $mnt
losetup -d /dev/block/loop99
rm /dev/block/loop99
I'm not sure about how I am cleaning up the new node, rm erases it... but is this the best method? rebooting the phone will erase the node anyway so maybe an if clause to test for the node loop99 before creating it will be better.
fralacos said:
It worked for me on loop7, but to be on the safe side, decided to use a higher loop number as suggested, but it requires to create the loop device as it doesn't exists, use mknod:
Code:
echo "SETTING UP LOOP DEVICE"
mknod /dev/block/loop99 b 7 99
losetup /dev/block/loop99 /sdcard/ubuntu/ubuntu.img
Now is working on loop99 too!. The clean up section for both bootubuntu and exitu scripts:
Code:
echo "UMOUNTING"
umount -f $mnt/dev/pts
umount -f $mnt/proc
umount -f $mnt/sys
umount -f $mnt
losetup -d /dev/block/loop99
rm /dev/block/loop99
I'm not sure about how I am cleaning up the new node, rm erases it... but is this the best method? rebooting the phone will erase the node anyway so maybe an if clause to test for the node loop99 before creating it will be better.
Click to expand...
Click to collapse
thanks a lot
I tried this idea already but it seems doesn't work under CM6.0...
and the problem was, every newly created loop device will always be busy, if app2sd is used. (Don't know why)
I'm going to try a different approach, I try to mount loop device to /data/local/ubuntu before Android mounts all app2sd applications
mathrock said:
This is because with Froyo apps to SD android creates an encrypted loopback device for each app on the SD card, so depending on the number of apps on your SD card loop0-7 may be in use. I solve this by using a high loop number with losetup - loop99.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
thanks.
my finding is, Android froyo app2sd uses dm-xx loop devices for sd applications, for example, now I have three games on sd card, by entering mount in terminal, i read that
/dev/block/dm-0,dm-1,dm-2 are used.
After I removed all SD applications and reboot system, all of those dm-xxx devices are not mounted anymore.
Also the only difference between mount result with app2sd and mount result without app2sd is usage of dm-xx devices.
Finally I've found solution to the "device or resource busy" error
but it seems like people are now less interested in running Ubuntu on Nexus One
the original post got more than 35k hits and more than 200 replies
Hi houzuoguo!!
I'm trying to type bootubuntu when enter in system, but i think i'm not fast enough or that not work for me. Everytime i get:
# bootubuntu
SETTING VARIABLES
SETTING UP LOOP DEVICE
losetup: /dev/block/loop1
MOUNTING
mount: mounting /dev/block/loop1 on /data/local/ubuntu failed: Device or resource busy
mount: mounting devpts on /data/local/ubuntu/dev/pts failed: No such file or directory
mount: mounting proc on /data/local/ubuntu/proc failed: No such file or directory
mount: mounting sysfs on /data/local/ubuntu/sys failed: No such file or directory
SETTING UP NETWORK
net.ipv4.ip_forward = 1
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexistent
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexistent
bootubuntu: cannot create /data/local/ubuntu/etc/hosts: directory nonexistent
Brought to you by NexusOneHacks.net and the open source community!
chroot: can't execute '/bin/bash': No such file or directory
UMOUNTING
umount: can't forcibly umount /data/local/ubuntu/dev/pts: No such file or directory
umount: can't forcibly umount /data/local/ubuntu/proc: No such file or directory
umount: can't forcibly umount /data/local/ubuntu/sys: No such file or directory
umount: can't forcibly umount /data/local/ubuntu: Invalid argument
losetup: /dev/block/loop1: Device or resource busy
#
Whats the problem then?¿?
Thanks in advance.
devex said:
Hi houzuoguo!!
I'm trying to type bootubuntu when enter in system, but i think i'm not fast enough or that not work for me. Everytime i get:
# bootubuntu
SETTING VARIABLES
SETTING UP LOOP DEVICE
losetup: /dev/block/loop1
MOUNTING
mount: mounting /dev/block/loop1 on /data/local/ubuntu failed: Device or resource busy
mount: mounting devpts on /data/local/ubuntu/dev/pts failed: No such file or directory
mount: mounting proc on /data/local/ubuntu/proc failed: No such file or directory
mount: mounting sysfs on /data/local/ubuntu/sys failed: No such file or directory
SETTING UP NETWORK
net.ipv4.ip_forward = 1
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexistent
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexistent
bootubuntu: cannot create /data/local/ubuntu/etc/hosts: directory nonexistent
Brought to you by NexusOneHacks.net and the open source community!
chroot: can't execute '/bin/bash': No such file or directory
UMOUNTING
umount: can't forcibly umount /data/local/ubuntu/dev/pts: No such file or directory
umount: can't forcibly umount /data/local/ubuntu/proc: No such file or directory
umount: can't forcibly umount /data/local/ubuntu/sys: No such file or directory
umount: can't forcibly umount /data/local/ubuntu: Invalid argument
losetup: /dev/block/loop1: Device or resource busy
#
Whats the problem then?¿?
Thanks in advance.
Click to expand...
Click to collapse
I worked on that problem for few weeks and finally I discovered, once I moved all SD applications back to Internal storage, loop1 no longer be busy.
Are you using Froyo app2sd?
houzuoguo said:
thanks a lot
I tried this idea already but it seems doesn't work under CM6.0...
and the problem was, every newly created loop device will always be busy, if app2sd is used. (Don't know why)
I'm going to try a different approach, I try to mount loop device to /data/local/ubuntu before Android mounts all app2sd applications
Click to expand...
Click to collapse
Some of us are still interested in this info but ubuntu runs pretty slow on the nexus. I say it would be nice to have the newest ubuntu (10.10) installed on the nexus one. Possibly the netbook remix version.
Lou2serious said:
Some of us are still interested in this info but ubuntu runs pretty slow on the nexus. I say it would be nice to have the newest ubuntu (10.10) installed on the nexus one. Possibly the netbook remix version.
Click to expand...
Click to collapse
thanks haha, good to hear that I'm not the only one still interested in running Ubuntu on Nexus One.
I'm thinking, if Nexus Two can be overclocked to 1.4Ghz, together with top class SD card, the speed will be enough to run Ubuntu fluently.
Hi! Thanx for ur work! It helped me.....
Now i´m having another issue....i´m triying either to resize the ubuntu.img to make it bigger so i can install the stuff i want ( clean install has 100 mb left) or (preffered option) mounting my sdcard so i can install the native programs from there...any ideas?¿
I think the simple way is just to create another file bigger.
funkatiko said:
Hi! Thanx for ur work! It helped me.....
Now i´m having another issue....i´m triying either to resize the ubuntu.img to make it bigger so i can install the stuff i want ( clean install has 100 mb left) or (preffered option) mounting my sdcard so i can install the native programs from there...any ideas?¿
Click to expand...
Click to collapse
You might want to build your own rootfs - check this site out - it worked great for me.
https://wiki.ubuntu.com/ARM/RootfsFromScratch
DISCLAIMER: You know the risks, bricking, breaking etc. I'm not, nor is anyone else responsible if something goes wrong with your device, especially should it turn into a cave troll and bludgeon someone to death.
You will have to be rooted for this to work.
Update 1/5/11
Changed the install and loader scripts re-compressed and uploaded, new download link. Stream lined the installation process (removed 5 steps)
Update 1/4/11
reflect changes to ubuntu.sh and bootubuntu scripts and streamlining the process. Added screenshots
_________________________
I was over at nexusonehacks.net and looking at the ubuntu on nexus one hack and was thinking that this could be ported to the nook color. The idea is to run ubuntu from an img on the sd card.
The following is a modified version of the "how to" orginally posted here
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
Credits
The guys at NexusOneHacks
xda user munday who has modified the scripts to work for the nook color
Devs at XDA Developer for the Ubuntu ARM image for HTC HD2
Saurik (Jay Freeman) for the Debian G1 script, which was hacked for Ubuntu on Nexus One! and then re-hacked for the Nook Color by munday
Here we go:
1) Go download the ubuntu file here: http://www.megaupload.com/?d=67BU4Y3T
2) Extract the contents using 7zip http://www.7-zip.org/download.html
3) Copy the extracted folder "ubuntu" to the root of your SD card
4) Unmount the nook from your pc, go into the app NookColor Tools (if you don't have it download it here courtesy of Ben 74 and click All Settings->Development then uncheck Auto Mount. This will prevent the SD card from being mounted automatically when plugged into the PC
5) Plug the Nook back into your pc and open a command line then navigate to your android sdk folder ie C:\android-sdk or wherever you have it and type
Code:
adb devices
Hit enter and make sure that the nook color comes up (should be the SN of your Nook)
Note: This can also be done from terminal emulator instead of adb...but it is kind of a pain
6) Now we want to go into the command line on the nook so type
Code:
adb shell
Hit enter and this should bring up a "#" sign.
7) Type
Code:
su
hit enter (I do this just as a force of habit)
8) Now we navigate to the ubuntu folder we just copied to our sd card by entering
Code:
cd /sdcard/ubuntu
hit enter. To confirm you are where you want to be you can type
Code:
ls
and it should list the contents of the ubuntu folder.
9) Run the setup script ubuntu.sh by entering the following:
Code:
sh ./ubuntu.sh
hit enter
10) Now type
Code:
bootubuntu
and hit enter
11) So now we have ubuntu command line up and running which should look like:
Code:
[email protected]:/#
We will need to get some packages to run a gui and then connect to it via VNC client. So we need to update a few things first. Type:
Code:
apt-get update
then
Code:
apt-get install tightvncserver
now we need the gui elements so enter this:
Code:
apt-get install lxde
12) Type the following:
Code:
export USER=root
vncserver -geometry 1024×600
this sets the resolution...you can change it to play around, but the native resolution for the nook is 1024x600. This is also where you will set the password for your vnc server...make sure to remember it
13) Next, we are going to add the following to /root/.vnc/xstartup file using cat command: (hit enter after each line and ignore the fact that it looks like it does it twice)
Code:
cat > /root/.vnc/xstartup
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
icewm &
lxsession
After hitting enter after the last line press "Ctrl+D" twice then press enter
14) We need the vnc server to start every time we start ubuntu, type this:
Code:
cat > front
export USER=root
cd /
rm -r -f tmp
mkdir tmp
cd /
vncserver -geometry 1024×600
Same as before, hit enter after each line then after hitting enter for the last line press "Ctrl+D" twice then press enter.
15) Enter this
Code:
cat front /root/.bashrc > temp
Then
Code:
cp temp /root/.bashrc
16) Now on the nook open up your vnc viewer app (android vnc viewer or PocketCloud...or whatever you use)
Use the following settings:
Host Address: 127.0.0.1 (some don't require this)
Password: the password you set up in step 16
Port: 5901
Save and then click connect and you should be up and running on ubuntu! To leave ubuntu type exit from adb. This should kill ubuntu. Exit adb and then you can disconnect the nook from your pc.
To start ubuntu from the nook open up a terminal emulater and type:
Code:
bootubuntu
Hit enter, this should bring up the [email protected], hhen press "Home" key and open up your vnc app. Now you are ready to rock your Linux tablet!
You could also use gscript lite to automate the process of starting ubuntu so you don't have to type it in the terminal everytime. You can get gscript lite from the market or download the file I have attached.
It does seem a little laggy..just a little...for now anyway
To exit ubuntu: Disconnect the vnc client then hold the "Home" key (I use button savior which brings up a nice little task manager) and click the Terminal emulator when it pops up under running tasks. Once you are back in the terminal you can type:
Code:
exit
to shut down ubuntu.
Enjoy and make sure you thank munday and the guys at nexusonehacks and all the devs who helped make it possible.
-devastator
EDIT:
I noticed that after rebooting the nook would hang at the "Future of reading" screen....if this happens turn the device off remove the sd card the turn the nook back on. It should boot fine. After it's finished you can return the sd card and mount it. This is strange and I'm looking into it. I'm not sure if this is limited to me or if it is universal to all nooks. It also still fails at shutting ubuntu down for some reason. I'm still looking into this.g into this.
I got it going, just needed a few "busybox"-es here and there . It needs some work, right now to get X you have to use VNC.
It's sluggish but a bit more work might just yield something a bit more usable. I'll play more tomorrow night.
Here's my scripts:
ubuntu.sh
Code:
mount -o remount,rw /dev/block/mmcblk0p5 /system
busybox modprobe ext2
rm -f /data/local/bin/fsrw
rm -f /data/local/bin/bootubuntu
rm -f /data/local/bin/unionfs
rm -f /data/local/bin/installer.sh
rm -f /data/local/bin/mountonly
mkdir /data/local/mnt
#busybox clear
rm /system/bin/fsrw
rm /system/bin/bootubuntu
rm /system/bin/unionfs
rm -/system/bin/mountonly
busybox cp -f fsrw /system/bin
busybox cp -f bootubuntu /system/bin
busybox cp -f unionfs /system/bin
busybox cp -f mountonly /system/bin
cd /sdcard/ubuntu
busybox chmod 4777 *
cd /system/bin/
busybox chmod 4777 *
cd /
#busybox clear
echo " "
echo "Ubuntu Chroot Bootloader v0.1"
echo "Ubuntu Bootloader is now installed!"
echo "This process does NOT damage Android OS!"
echo " "
echo "Original Installer by Charan Singh"
echo "Modified for Ubuntu Chroot by Max Lee at NexusOneHacks.net"
echo " "
echo "To enter the Debian Linux console just type 'bootubuntu'"
bootubuntu
Code:
mount -o remount,rw /dev/block/mmcblk0p5 /system
export kit=/sdcard/ubuntu
export bin=/system/bin
export mnt=/data/local/mnt
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
busybox mknod /dev/loop2 b 7 0
mount -o loop,noatime -t ext2 $kit/ubuntu.img $mnt
mount -t devpts devpts $mnt/dev/pts
mount -t proc proc $mnt/proc
mount -t sysfs sysfs $mnt/sys
busybox sysctl -w net.ipv4.ip_forward=1
echo "Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4"
echo "nameserver 8.8.8.8" > $mnt/etc/resolv.conf
echo "nameserver 8.8.4.4" >> $mnt/etc/resolv.conf
echo "Setting localhost on /etc/hosts "
echo "127.0.0.1 localhost" > $mnt/etc/hosts
echo "READY TO ROCK AND ROLL BABY! "
echo "Brought to you by NexusOneHacks.net and the open source community! "
echo " "
busybox chroot $mnt /bin/bash
#After exit command is executed clear it all up
echo " "
echo "Shutting down Ubuntu"
umount $mnt/dev/pts
umount $mnt/proc
umount $mnt/sys
umount $mnt
Then just followed the instructions at nexusonehacks.
note: to run bootubuntu i had to use sh and the use the full path:
Code:
# sh /system/bin/bootubuntu
other note: I was using adb not a term app on the nook.
Obligatory video
I can't post links yet so check: youtube.com/watch?v=TnXfZ6aagn8 for a really boring video
EDIT: switched the names, DOH!
I also had to use sh and the full path also. Thanks for the update on the script...gonna try it in the morning (it's 2am here) will also see if I can help to get it running smoother. What class SD card are you using? I imagine a class 4 or higher would yeild better results as far as responsiveness goes.
The sd is a class 2 that came in one of my dev phones. I'll pick up a faster one tomorrow after work and test it out.
It's just about 3am here now, we must be in the same time zone.
I'm going to bed now, but first here's a modded version of the script you had originally posted that also works now.
bootubuntu
Code:
#!/bin/sh
mount -o remount,rw /dev/block/mmcblk0p5 /system
export kit=/sdcard/ubuntu
export bin=/system/bin
busybox [ ! -d /data/local/ubuntu ] && mkdir /data/local/ubuntu
export mnt=/data/local/ubuntu
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
busybox mknod /dev/loop1 b 7 0
busybox losetup /dev/block/loop1 /sdcard/ubuntu/ubuntu.img
mount -t ext2 /dev/block/loop1 /data/local/ubuntu
#mount -o loop,noatime -t ext2 $kit/ubuntu.img $mnt
mount -t devpts devpts $mnt/dev/pts
mount -t proc proc $mnt/proc
mount -t sysfs sysfs $mnt/sys
busybox sysctl -w net.ipv4.ip_forward=1
echo "Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4"
echo "nameserver 8.8.8.8" > $mnt/etc/resolv.conf
echo "nameserver 8.8.4.4" >> $mnt/etc/resolv.conf
echo "Setting localhost on /etc/hosts "
echo "127.0.0.1 localhost" > $mnt/etc/hosts
echo "READY TO ROCK AND ROLL BABY! "
echo "Brought to you by NexusOneHacks.net and the open source community! "
echo " "
busybox chroot $mnt /bin/bash
#After exit command is executed clear it all up
echo " "
echo "Shutting down Ubuntu"
umount $mnt/dev/pts
umount $mnt/proc
umount $mnt/sys
umount $mnt
busybox losetup -d /dev/loop1
#unregistering the loopback device just seems to die. need to fix or remove.
I'll look at the N1 formus tomorrow too and see if they have made progress in getting X to run fast or without need for VNC.
Nice work, I am addicted in seeing the crazy crap people are doing everyday.
Couldn't sleep so I'm messing around with it now...I'm using a class 4 and have it up and running. It does seem to be a little laggy, but I don't have a class 2 to compare it to. Let me know what you find out, I'll keep playing with it also to see if I can get it to be more responsive...but we are definately on our way to having a great little linux tablet in addition to android. You should also be able to use this for other builds of linux also by just changing out the .img file to a flavor of your choosing. I'm excited
I have also updated the OP with the how to and credits. Really appreciate your help munday.
I noticed that after rebooting the nook would hang at the "Future of reading" screen....if this happens turn the device off remove the sd card the turn the nook back on. It should boot fine. After it's finished you can return the sd card and mount it. This is strange and I'm looking into it. I'm not sure if this is limited to me or if it is universal to all nooks.
Edit:
Running into some strange occurrences...it appears that when you type exit from the terminal to kill ubuntu, I believe ubuntu stays running...anyway, I'm going to bed and will work on it more tomorrow.
devastatorx said:
You should also be able to use this for other builds of linux also by just changing out the .img file to a flavor of your choosing. I'm excited
Click to expand...
Click to collapse
Are there any increased risks with changing the version you use?
Well, you will want to make sure that the build supports ARM based devices.
munday said:
Then just followed the instructions at nexusonehacks.
note: to run bootubuntu i had to use sh and the use the full path:
Code:
# sh /system/bin/bootubuntu
Click to expand...
Click to collapse
I fixed this, the scripts were backwards, I have updated the OP to reflect the changes and bootubuntu now works
devastatorx said:
I fixed this, the scripts were backwards, I have updated the OP to reflect the changes and bootubuntu now works
Click to expand...
Click to collapse
sweet, i can't wait to get home to play more!!!
I've tried running ubuntu.sh from the terminal emulator (With su) and from ADB, and have not had success with either.
The readout is:
Code:
': File existste '/system/bin
': File existste '/system/bin
': File existste '/system/bin
: not found
: not found
cd: can't cd to /sdcard/ubuntu
: not found
: No such file or directory
: not found
cd: can't cd to /system/bin
: not found
: No such file or directory
: not found
cd: can't cd to /
: not found
: not found
Ubuntu Chroot Bootloader v0.1
Ubuntu Bootloader is now installed!
etc., etc.
Is there a problem with how I copied the script? I assume the first part about the file existing is due to this being the third or fourth time I've tried running the script (Unsuccessfully), but I've no idea how to interpret the rest.
Thanks
munday said:
sweet, i can't wait to get home to play more!!!
Click to expand...
Click to collapse
I sent you a message
Link3737 said:
I've tried running ubuntu.sh from the terminal emulator (With su) and from ADB, and have not had success with either.
The readout is:
Code:
': File existste '/system/bin
': File existste '/system/bin
': File existste '/system/bin
: not found
: not found
cd: can't cd to /sdcard/ubuntu
: not found
: No such file or directory
: not found
cd: can't cd to /system/bin
: not found
: No such file or directory
: not found
cd: can't cd to /
: not found
: not found
Ubuntu Chroot Bootloader v0.1
Ubuntu Bootloader is now installed!
etc., etc.
Is there a problem with how I copied the script? I assume the first part about the file existing is due to this being the third or fourth time I've tried running the script (Unsuccessfully), but I've no idea how to interpret the rest.
Thanks
Click to expand...
Click to collapse
Try using these, just unrar and then copy them in your ubuntu folder, if it asks to overwrite just click yes...also you have autmounting of the sd card turnned off in nook color tools settings right?
Yeah, it must have been an error on my end. Using the updated scripts you posted worked like a charm.
Thanks!
Link3737 said:
Yeah, it must have been an error on my end. Using the updated scripts you posted worked like a charm.
Thanks!
Click to expand...
Click to collapse
Good to hear!
I'm currently working on making this a port to the SD card so that with the sd card in it boots into ubuntu from power off, and with the sd card out it boots to android then you replace the sd and use it for storage like normal. It will also run a lot snappier....well that's the idea anyway.
devastatorx said:
Good to hear!
I'm currently working on making this a port to the SD card so that with the sd card in it boots into android from power off, and with the sd card out it boots to android then you replace the sd and use it for storage like normal. It will also run a lot snappier....well that's the idea anyway.
Click to expand...
Click to collapse
Booting from SD in the same fashion as Nookie Froyo? That sounds like it would give a huge performance boost over the current method, I can't wait to see what you come up with.
This should be acheivable using the method mentioned in this topic:
http://forum.xda-developers.com/showthread.php?t=873243 thanks to clockworx.
Currently looking into this
devastatorx said:
This should be acheivable using the method mentioned in this topic:
http://forum.xda-developers.com/showthread.php?t=873243 thanks to clockworx.
Currently looking into this
Click to expand...
Click to collapse
I was thinking the exact same thing, the nook seems to like booting from sd, so we should be able to set up the partitions like the foryo sd and edit the init.rc and env.txt to boot ubuntu instead of android. Just a theory though. It's my plan for tonight anyway.
munday said:
I was thinking the exact same thing, the nook seems to like booting from sd, so we should be able to set up the partitions like the foryo sd and edit the init.rc and env.txt to boot ubuntu instead of android. Just a theory though. It's my plan for tonight anyway.
Click to expand...
Click to collapse
I also stumbled across this: http://androix.org/ Which talks about a native android xserver which does a way with the vnc aspect altogether. I downloaded and attempted to install but I get the error "There is a problem parsing the package" and I haven't had any luck plus there isn't much documentation.
Let me know how it goes munday, I'll be working on the same thing later (have to take the fiance out for dinner)
question
I was just curious, after installing ubuntu can we install flash as we would had we booted linux from netbook?
All right... I guess it's time to "ask the experts". My linux background has not been very much help here... ARGH!
Okay, I have two script that I have written that are supposed to mount /system as RO and RW respectively. Very simple:
To mount rw:
Code:
#!/system/bin/sh
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
To mount ro:
Code:
#!/system/bin/sh
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
I manually ran the mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system command and adb pushed them to /system/xbin as mountro and mountrw and chmod both to 755.
In ADB I try to execute:
Code:
/system/xbin/mountrw
and get an error stating:
Code:
/system/xbin/mountrw: not found
I even try:
Code:
/system/bin/sh /system/xbin/mountrw
and I get this error:
Code:
mount: No such file or directory
Okay, so I figured out that it is having a problem trying to find the mount command, so I modify the script to:
Code:
#!/system/bin/sh
/system/bin/mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
I then re-run this:
Code:
/system/bin/sh /system/xbin/mountrw
and I'm still getting this friggin' error message!
Code:
mount: No such file or directory
When I run it through Script Manager I get the same error:
Code:
mount: No such file or directory
This should just friggin' work damn it! (Sorry, very frustrated.)
Also, it would be nice NOT to have to type the path to the script. I can run ZepplinRox V6_SuperCharger script from the ADB command line just by typing from the directory I have it in:
Code:
sh V6_SuperCharger_for_Android-update9_RC3.2.sh
No absolute path, no ./ path... WTF? ARGH!
Okay, I KNOW this is friggin' possible just by the fact that I can run Zep's script in ADB...
So, any takers? Thanks in advanced...
Friggin' Ciao.
[EDIT]
Okay, I figured out a work around for this... I probably should not work on this after working at work all day... But, that is another story...
I have heavily modified the script files I have created. They are still called mountrw and mountro and the contents are as follows:
mountrw:
Code:
#!/system/bin/sh
# This mounts the /system file system as Read Write in order to modify or add
# files to the /system file system.
busybox mount -o remount,rw / 2>/dev/null
busybox mount -o remount,rw rootfs 2>/dev/null
busybox mount -o remount,rw /system 2>/dev/null
mountro:
Code:
#!/system/bin/sh
# This mounts the /system file system as Read Only which is the default when
# Android is booted.
busybox mount -o remount,ro / 2>/dev/null
busybox mount -o remount,ro rootfs 2>/dev/null
busybox mount -o remount,ro /system 2>/dev/null
So, after poking around in ZepplinRox's V6_SuperCharger script, I found those values repeated several times, so that helped point me in the right direction. The next problem I had was getting the scripts to "run from anywhere". I still haven't figured that one out yet, and the VERY MESSY solution to that is to put the two scripts in /. I know, I know, I know... that is the most dangerous place to put it.
So, when I first log into the ADB shell all I have to type is
Code:
sh mountrw
and when I'm done, type
Code:
sh mountro
So, As the work around, this works. I really don't recommend anyone else doing this because of the data security risks that you open your phone up to... Yes, I'm aware of them and that is why I am asking now for some help in having the ability to run a script globally, from anywhere in the android file structure. I don't mind typing the "sh" in front of the script since I sometimes must do that in linux. I have noticed that the $PATH of Android doesn't allow scripts to be executed unless you type the absolute path to the script, or are in the same directory as the script.
Okay, so again to ask: Is there any way to execute a script without having to type the absolute path to it? Thanks!
Ciao! (MUCH calmer now then when I first wrote this post...)
[/EDIT]
I don't use adb much at all.
Usually I move stuff around with root explorer and use terminal emulator a lot.
I assume you ran everything as superuser as I sometimes forget to type su first
Maybe the sh command work on the supercharger script because it has the .sh extention.
You can try typing "bash mountrw" since that works when I install the script to /system/xbin/V6
But after reading your post I looked and saw I forgot about permissions so I did chmod 755 and now this works...
su
V6
heh..
I don't have tp type "bash V6" anymore
zeppelinrox said:
I don't use adb much at all.
Usually I move stuff around with root explorer and use terminal emulator a lot.
I assume you ran everything as superuser as I sometimes forget to type su first
Maybe the sh command work on the supercharger script because it has the .sh extention.
You can try typing "bash mountrw" since that works when I install the script to /system/xbin/V6
But after reading your post I looked and saw I forgot about permissions so I did chmod 755 and now this works...
su
V6
heh..
I don't have tp type "bash V6" anymore
Click to expand...
Click to collapse
Yes, I ran everything as su. (I'm a linux admin guy, so su and sudo is next to natural for me...)
Okay, so you put the mountrw script in /system/xbin/V6/ ??
Also, it is an sh script. I identify that in the first line of
Code:
#!/system/bin/sh
I have changed it to bash and same problem. Oh well. I think I can live with the scripts at /
Thanks though!
Ciao!
I learned about this here... http://fieldeffect.info/w/NativeCompileSDK
You can install an i386/x86_64 chroot within your existing Debian chroot using qemu-user-static to run the Android SDK on your Android phone/tablet/phablet.
1.
Get yourself a debian chroot, I recommend at least 2gb. I use DebianKit from market.
2.
You will need a X11 desktop environment and a VNC client on your device. I use androidVNC from market.
Here is my working example...
Start your Debian chroot/environment and do...
apt-get install openbox openbox-themes obmenu obconf menu menu-xdg xdg-utils xfonts-base xfonts-terminus* nautilus terminator lxappearance gmrun leafpad man-db hicolor-icon-theme tightvncserver tint2
That gives you a window manager, fonts, filebrowser, terminal emulator, text editor, theme manager, taskbar, and a VNC server.
Now lets get some GTK engines and libraries....
apt-get install gtk2-engines-auroa gtk2-engines-murrine gtk2-engines-oxygen gtk2-engines-pixbuf libgtk2.0-bin gtk3-engines-oxygen gtk3-engines-unico libgtk-3-bin
Now 7zip to handle zips and archives comfortably(put non-free in your apt sources.list)...
apt-get install p7zip p7zip-full p7zip-rar zip unzip
##The Android SDK manager, qemu, and multistrap##
apt-get install ant file openjdk-6-jre openjdk-6-jdk qemu-user-static libswt-gtk-3-java libswt-cairo-gtk-3-jni
3.
Now we can build a small x86_64 rootfs using multistrap
multistrap can use a config, have mine...
http://db.tt/hS5j3wg
Copy multistrap.conf straight into your working(pwd) directory....
cp /sdcard/Download/multistrap.conf .
Do this to avoid multistrap complaining later...
cat multistrap.conf >mstrap
mkdir /data/mnt
Determine size of rootfs for loop image..
du -hs /data/mnt/
Now make an image for x86_64 chroot
dd if=/dev/zero of=/sdcard/64bit.img bs=$(( 0x100000 )) count=YOUR IMAGE SIZE
That byte size makes your image slightly larger than the count value in Mb, for example count=78 will write 82Mb image.
mkfs.ext2 /sdcard/64bit.img
tune2fs -c0 /sdcard/64bit.img
mkdir /data/tmp
busybox mount -o loop /sdcard/64bit.img /data/tmp/
cp -r /data/mnt/* /data/tmp/
umount /data/tmp
rm -r /data/tmp/
rm -r /data/mnt/
mkdir /data/mnt
busybox mount -o loop /sdcard/64bit.img /data/mnt/
5.
Now the environment is set up and mounted, at this point install the SDK
Aim your browser to http://developer.android.com/sdk/index.html
Select "Linux" from "SDK Tools Only", thats the last thing at the bottom of the list.
cp /sdcard/Download/android-sdk_r21.0.1-linux.tgz .
7z x android-sdk_r21.0.1-linux.tgz russosv
7z x android-sdk_r21.0.1-linux.tar
Now we need a couple goodies from http://fieldeffect.info/w/NativeCompileAPK ##--Thanks to russosv from FeildEffect
These are edited from original....
#!/bin/bash
QEMU=/usr/bin/qemu-x86_64-static
64CHROOT=/data/mnt/
case "$1" in
mklinks)
if [ ! -e "./64BIT" ]; then
mkdir ./64BIT
fi
for i in $(file ./* | grep "ELF 32" | awk '{print $1}' | sed s/://g | sed s/[./]//g); do
echo "Moving $i..."
mv $i ./64BIT
ln -s ~/bin/run-64-link $i
done-
;;
*)
$QEMU $64CHROOT/lib64/ld-linux-x86_64.so.2 --library-path $64CHROOT/lib:$64CHROOT/usr/lib:$64CHROOT/usr/share/perl/5.12.4/unicore/lib:$64CHROOT/var/lib:$64CHROOT/lib/x86_64-linux-gnu:$64CHROOT/usr/lib/x86_64-linux-gnu [email protected]
;;
esac
Copy that to run-64, then...
chmod 755 run64
cp run-64 /usr/bin/
One more...
echo $(dirname $0)/64BIT/$(basename $0) [email protected]
/usr/bin/run-i386 $(dirname $0)/64BIT/$(basename $0) [email protected]
Make that run-64-link
chmod 755 run-64-link
cp run-64-link /usr/bin/
5b.
Now launch VNC server
tightvncpasswd
tightvncserver
killall Xtightvnc
cat >.vnc/xstartup<<EOF
tint2 &
terminator &
openbox-session
EOF
tightvncserver
export DISPLAY=:1
6.
Now launch the VNC client I mentioned earlier, should connect with 127.0.0.1:5901 and your password you set.
Go back to terminal or use the one launched on X11 to do...
sh android-sdk-linux/tools/android
Install at least one api.
If all went well you can now go around "debugging" yours and your friends Android devices over wifi now.
For an example, and to see it work do....
svc wifi disable(or enable) ##this turns off/on wifi
setprop service.adb.tcp.port 5555(or -1) ##this turns on/off adb over network
stop adbd
start adbd
adb connect 127.0.0.1(yours) or any other adbd addy listening on your network,
Have fun
Never did a "how to" before, go easy and I'll make corrections and answer things. Thanks for reading. Leave feedback.
Potential necro post but I believe the information is still currently valid and not readily available on searches. I've looked variations of this up for years with no luck until I hit the right search terms.
bump, and thanks.
can't believe there's no comments.
I know it's a slower than real-64-bit-pc method but not all of us have access to new hardware... or pc's. Maybe a novelty, still cool and useful if you've got the time to let the slower hardware compile.
you have preserved the scripts, original link is dead.
here is the Internet Wayback Machine cache of the original circa 2012 for reference.
http://web.archive.org/web/20120502044700/http://fieldeffect.info/w/NativeCompileAPK
appreciate you sharing.
Hi all,
I've been looking around to solve my /cache problem of it being only 17MB.
Found a temporary fix but that needed to be implemented or executed every boot up.
And since I am to lazy or stupid to remember that every boot I search for another solution ...
Combined a script from someone else with some stuf I found somewhere else...
Descriptions are in the code....
This code works on my samsung I9000 with Full Advance Rom final 6.0.1:good::good:
Code:
#!/system/bin/sh
# stratosk - 27/07/2011
# Modified by Dutchpatriot 26/06/2017
# Works on Full advance Rom with I9000
# Change params
# Check your partitions name /cache
# Need to be root via ADB or root via device
# with the command : mount
# This fix is only needed when /cache has arround 17mb!!!
# run this command as root in ADB shell as root
# To be able to execute this you need to change file system from read-only to rewritable
# as root exec this command: mount -o rw,remount /system
# Paste this text in a file called cachefix.sh
# command : vi cachefix.sh
# If you like me, and arn't that good with vi
# I will attach a cachefix.sh to this post as
# cachefix.txt rename it to cachefix.sh
# give the cachefix.sh the right permissions
# chmod 777 cachefix.sh
# Run this once!
# sh /LOCATION_OF_SCRIPT/cachefix.sh
# or
# ./LOCATION_OF_SCRIPT/cachefix.sh
#
# when ran once the /data/local
# and all went well has a
# cache.img file
# This is now mounted as /cache
# command to see or verfy: mount
# /cache is now as big as you made it under
# CREATE A FILE 500mb
# Every time you reboot the 99Tcachefix script in /etc/init.d/ will be executed!
#
# adb root
# adb shell
# remount / and /system writable
mount -o rw,remount /
mount -o rw,remount /system
# EDIT the right old cache partitio /dev/block/mtdblock3 to fit yours!!!
# Makes script in /etc/init.d named 99Tcachefix so it will be executed on boot
echo "#!/system/bin/sh \n umount /dev/block/mtdblock3 \n losetup /dev/block/loop7 /data/local/cache.img \n mount -t ext4 /dev/block/loop7 /cache \n chown system.cache /cache \n chmod 770 /cache" >> /system/etc/init.d/99Tcachefix
# assign the right permissions to be executed as root but not edited
#There is a very neat trick in every Linux which will allow you to do so. It is called the SetUI bit.
#Keep in mind that you will need to have the permissions locked down tight in this file for this to be secure.
#Make the file owned by root and group root:
#sudo chown root.root <my script>
#Now set the SetUID bit, make it executable for all and writable only by root:
#sudo chmod 4755 <my script>
# Keep in mind if this script will allow any input or editing of files, this will also be done as root.
# source https://askubuntu.com/questions/167847/how-to-run-bash-script-as-root-with-no-password
# Leave as is!
chown root.root /system/etc/init.d/99Tcachefix
chmod 4755 /system/etc/init.d/99Tcachefix
# Check if dir is there else Create Dir LEAVE AS IS
if [ -d "/data/local" ]; then
echo "directory /data/local already there!"
echo "Showing dir /data/local"
sleep 3
ls "/data/local"
sleep 2
else
# create dir
mkdir /data/local
echo "Directory /data/local created"
fi
# create a file 500mb (change if you like count=XXXXXX)
dd if=/dev/zero of=/data/local/cache.img bs=1024 count=500000
# create ext4 filesystem LEAVE AS IS!!
mke2fs -F -T ext4 /data/local/cache.img
# my cache partition is called /dev/block/mtdblock3 see whats yours is called and
# change this to yours!!!
umount /dev/block/mtdblock3
# mount LEAVE AS IS!!!
losetup /dev/block/loop7 /data/local/cache.img
mount -t ext4 /dev/block/loop7 /cache
chown system.cache /cache
chmod 770 /cache
# Remount / and /system as read-only again
mount -o ro,remount /system
mount -o ro,remount /
sleep 3
echo "Now after reboot this (cache) partition will be back!"
sleep 10
echo "All done, if there where no errors you can now delete cachefix.sh"
echo "If your new /cache partition is mounted with the given size than all is good"
echo "These are the configurations now"
# exec df command to show config now
df
sleep 10
exit
With this your /cache will be changed to whatever values you give in the code...
For safety remove the cachefix.sh afterwards...
Added cachefix.txt, download and rename to cachefix.sh
Greets,
Dutchpatriot