Hi All,
I find a bug on CM11 Edition III, I think it's an issue with UMS process. When I plug my phone by using USB with UMS selected, I can see the SD card (F: / accessible) but not the external sd card (G: / not accessible).. when I disconnected the usb cable, the external SD can't mount automaticly I have to reboot the phone or remove the ext sdcard it plug it.
The second question is, is it possible to have the callbar verticaly by slide or button?
Thanks in advance for you help
Related
Hi guys,
I have had an Atrix since a few months, and everything has been working fine. However, since the last few days when I connect the phone to my computer over USB, the external 16 Gig SD card shows up as a drive, but when I click on the other drive which is supposed to be the internal SD card, it says "Please insert a disk into Removable Disk (D" in Windows.
Phone: Sim-unlocked AT&T Atrix, rooted, Gingerblur 4.5
Computer: Windows 7 (x64) with drivers installed
It has worked many many times in the past, and I haven't made any recent changes to the phone which are related to this in any way.
I have tried:
1. Changing USB connection mode between all 4 options, include USB Mass Storage
2. Restarting the computer
3. Restarting the phone
4. Switching on/off USB Debugging mode
5. Manually unmounting the "Settings" -> "SD card & phone storage settings" -> "Unmount internal phone storage"
6. Reinstalling the drivers - got it from here because the gitbrew link seems down
In fact I am able to view both /sdcard and /sdcard-ext using Root Explorer on the phone, so I don't think the internal memory is corrupt in anyway.
I've searched both xda and atrixforums, but not found a working answer to it.
Any suggestions? This is very frustrating.
Regards,
Varun
My phone has done this on occasion but a phone reboot fixed it.
Tried many reboots, but not working. Are there any filesystem integrity checks I could do via adb?
varunj said:
5. Manually unmounting the "Settings" -> "SD card & phone storage settings" -> "Unmount internal phone storage"
Click to expand...
Click to collapse
This may seem a silly question, but you don't mention doing it. Did you mount the internal sdcard after you unmounted it? Did you unmount while connected to your computer or when not connected?
Were you accessing your internal sdcard with any apps, or did you have it open in root explorer for example when you connected it to your computer? This can mess up the umounting procedure when you plug into USB.
Have you tried on another computer?
Hi,
I'd like to know if there is any way of selecting mass storage mode only for external sd_card. When I conect to a PC or any other device, if I select mass storage mode, both internal and external storage connects, but I would like to connect only external one (the sd_card itself). Is that possible?
Just for the record, I'm using CM9 now, but I haven't found this option on any of the roms I've tested.
Thank you.
Just remove the sdcard from microSD slot and insert it to card reader ._.
przemcio510 said:
Just remove the sdcard from microSD slot and insert it to card reader ._.
Click to expand...
Click to collapse
I'm sorry, maybe I didn't explained it correctly... Of course, this is a way to access the sdcard, and I know there are some other solutions, but it's not what I was asking. I don't want to remove the battery cover each time I want to access the sdcard. I don't want to wear with me a card reader always...
There are some cases in which I'd like to use this feature. For example, my car stereo has an USB port. In case I connect the SGS2, both storage units connects to the stereo, but it only detects one of them, in this case, the first one (internal Storage). This has 2 problems, the first one is that I use the external sdcard for music storage, and the second one is that some applications that stores data in the internal sdcard stops working.
I know there are many other ways of doing things (using a usb drive, removing sdcard...) but I just wanted to know if selecting only external storage was possible.
Thank you.
I`m interested into this too...
Phone forgets ringtones selection when they are stored on internal card after card disconnected from PC
Is there any way to mount only external SD card?
SII i9100
latest JellyBam
latest Siyah kernel
- First of all I admit it's my fault I wasn't paying attention..
- Second, I'm not sure if this is the right section to post this here, So pardon me..
- I was connecting my SGSII using the internal SD card as a USB mass storage.. a the same time I was connecting my Kingston USB flash drive.
- I wanted to format the Kingston flash drive and because I wasn't paying attention,and By mistake I right clicked on the SGSII internal SD card-> format->changed the file System from FAT32 to NTFS -> pressed start.
- It didn't take me long before I realized what I just did and more stupidly pressed the cancel button and unplugged the phone immediately.
- Now phone works fine but won't detect the internal SD card
- Phone used to auto-mount the SD cards automatically when connected to PC
-When connect it to the PC , It detects and mounts the external SD card and I can access it normally , But not the corrupted internal SD card appears as Drive ( J ) but when I click it, I get ( please insert a disk into removable Disk (J
- I'm unable to format or detect the internal SD card except it is shown as Drive (J) on the PC
- tried to re-mount it using CWM in recovery mode but no joy as well..
- Please skip the blaming part on how stupid I was and please advise if there is any possible way to fix this, make the Internal SD card detectable and mountable again.. then I worry about recovering the files..
try this, go to settings> more> USB utilities> click 'connect storage to pc'> click ok > connect USB cable> then click turn on. this should mount it hopefully and you will be able to reformat it to fat 32..hopefully!
Thanks for your reply, I've already tried that with no success
- However Issue is now resolved
- I tried again with CWM in the recovery mode, I tried random things such as try to re-partition the SD card..
- And when started the phone and tried to connect to the PC, got notification that SD card is corrupted and was able to format it
- Although now data is lost but now SD is detectable again..
- Now I worry on how to recover the lost data
I'm working on a tablet for a friend, running Android 4.1.1, just got it rooted, Link2SD running, SD card properly partitioned. Everything is good... except before installing Link2SD and partitioning the card, when I would connect the tablet to my PC by USB, and turn on USB Storage on the tablet, my PC would mount the tablet's internal storage from /mnt/sdcard and the tablet's micro SD card ... now that I'm using Link2SD when I enable USB Storage, it mounts the regular fat32 portion of the micro SD and the ext2 partition of the micro SD card created for Link2SD. Any idea why this is and how to correct it? I'm hoping there's a system setting somewhere that I can list which locations to share when turning on USB Storage mode on the tablet.
hi all
i just installed AospExtended-v7.0-vince-20200311-1907-OFFICIAL.
when i plug my phone via usb to my PC (windows 10) i cannot access the internal storage or the sd card.
when i tap on the option to enable it i cannot press anything it stuck on "no data transfer"
i tried to stop debug mod but still nothing.
thanks