[Q] Futuristic swipe to other device over WiFi Direct - C++ or Other Android Development Languages

Hi there,
I imagine an application that lets you swipe pictures or other media directly to a nearby device.
The file is sent and displayed so quickly on the other device, so it looks as it would magically float over to the other screen.
I want to use WiFi Direct, which is said to achieve up to 40Mbit/s:
Search for "Superbeam" in Play Store
The connection could be established as soon as the devices are near each other and help up all the time.
Do you think this is possible? Do you think it is possible to send and display an image in about 0.1s ?
Thank you for your replies
andi545

Well if you are going to make an app like that, it's possible. Well, it will need that app runs in both devices, but you will have to make it on your own way, creativity.

Related

Barcode data transfer idea

Hello XDA-Developers!
I had an idea this morning.
Current Transfer Tech:
Bluetooth - Requires the user of both devices to enable their bluetooth devices, then they have to go about pairing the devices to allow file tansfer (this is not always the case though). then the, shall we call him "sender" has to select a file and attempt to bluetooth the file to the, shall we say "reciever", who in turn has to accept the data and then the transfer starts.
Wifi - not used very often but files can be transferred through an app or through an ftp server etc from one device to another. this however requires a little, if not more, skill to complete and can be fustrating looking for ip addresses etc.
NFC - this is an emerging technology that is being implemented in more and more devices such as the Galaxy Nexus. This is a very efficient and fast way to transfer data from one NFC enabled device to another NFC enabled device, however like most of the android community, my phone does not have this capability.
My Idea:
This is just an idea and you may say what you like about it but i thought i would write it down here, the first place that came into my mind where i thought that someone could take this idea further.
Now my friend uses a blackberry, and i know that that word is almost taboo on this forum but hear me out. He uses his blackberry for a service called BBM (Blackberry Messenger), i am sure you are all familiar, and to add a friend of his so that he can contact them using the service, he simply uses his blackberrys camera to scan a 2D Barcode on his friends device and all his BBM Pin and other data is transfered through the phones camera so that they can communicate on the service.
I though that this could be used more on android devices. This could be used to transfer small files from one device to another such as contact information, websites (already a reality), even larger files such as word documents and other reletavely small documents. Now i know that these files cannot be displayed on a single 2D barcode but maybe they can be send using not one barode but a series, the barcodes could be in an animation on the device screen, showing one barcode after another all and the "reciever" could simply hold his device's camera over the animation and it could read the series of barcodes and then compile all of the data to create a single document.
Now i realise that this could be a silly idea as the ammount of data that can be transferred through a 2D barcode is not huge, al lot of barcodes would be needed to transfer a larger file than someones contact details.
Let me know what you think, and you are free to do what you want with my idea, i wont hold it against you
hazzahex
Hello
I know it's a little late (only 3 years lol), but I just wanted you to know that I've implemented a system similar to the one you describe
It was my college's final project
hazzahex said:
Hello XDA-Developers!
I had an idea this morning.
Current Transfer Tech:
Bluetooth - Requires the user of both devices to enable their bluetooth devices, then they have to go about pairing the devices to allow file tansfer (this is not always the case though). then the, shall we call him "sender" has to select a file and attempt to bluetooth the file to the, shall we say "reciever", who in turn has to accept the data and then the transfer starts.
Wifi - not used very often but files can be transferred through an app or through an ftp server etc from one device to another. this however requires a little, if not more, skill to complete and can be fustrating looking for ip addresses etc.
NFC - this is an emerging technology that is being implemented in more and more devices such as the Galaxy Nexus. This is a very efficient and fast way to transfer data from one NFC enabled device to another NFC enabled device, however like most of the android community, my phone does not have this capability.
My Idea:
This is just an idea and you may say what you like about it but i thought i would write it down here, the first place that came into my mind where i thought that someone could take this idea further.
Now my friend uses a blackberry, and i know that that word is almost taboo on this forum but hear me out. He uses his blackberry for a service called BBM (Blackberry Messenger), i am sure you are all familiar, and to add a friend of his so that he can contact them using the service, he simply uses his blackberrys camera to scan a 2D Barcode on his friends device and all his BBM Pin and other data is transfered through the phones camera so that they can communicate on the service.
I though that this could be used more on android devices. This could be used to transfer small files from one device to another such as contact information, websites (already a reality), even larger files such as word documents and other reletavely small documents. Now i know that these files cannot be displayed on a single 2D barcode but maybe they can be send using not one barode but a series, the barcodes could be in an animation on the device screen, showing one barcode after another all and the "reciever" could simply hold his device's camera over the animation and it could read the series of barcodes and then compile all of the data to create a single document.
Now i realise that this could be a silly idea as the ammount of data that can be transferred through a 2D barcode is not huge, al lot of barcodes would be needed to transfer a larger file than someones contact details.
Let me know what you think, and you are free to do what you want with my idea, i wont hold it against you
hazzahex
Click to expand...
Click to collapse

[Q] Father of special needs kid needs help with android setup

Hi,
This is a pretty special use case, and I hope you guys can help me put together a solution, that will help my family.
My daughter is severely autistic, but loves music. We have worked with CD's for years, but they get destroyed by herself, and are a constant source for conflict for a variety of reasons - because we need to control her access to them (music-time vs. sleep-time for instance) and control the volume. I have to think, I could come up with a technical solution, so we could avoid physical media altogether.
Here is what I would like:
Take our Nexus 7, fill it up with music (maybe google music), mount it on the wall in her room, hook speakers up to it and let her control it as she likes. However, we need to be able to override, ie. lock her out of it if necessary, control the volume etc. I also do not want her to be able to screw up the Nexus by doing other stuff on it, so I would like to be able to lock it to just the music app, unless myself or my wife unlock it to do some sort of maintenance.
To sum up:
- Nexus 7
- Control volume / lock remotely - from pc or another android phone
- Music software
- Access restricted to limited list of apps (music app first and foremost)
How could this be done on Android? What software should I use?
I hope you guys have some good suggestions, so I can get a nice solution to this. Thanks in advance.
Hi
Never really tried to do anything like this but maybe you could create another user profile that has limited functions, I don't know how limited you can be with this but any nexus seven model should allow for a second profile, only allow her to use this one
And in this profile use a launcher that allows you to hide apps if Google won't remove enough for you.
On this profile and the one you create for yourself have a lockscreen password of sorts as well
There may even be an app or launcher in the market to do something this similar.
As for remotely controlling it, I've never tried this, I know you can if it is wired... Actually if you have an adb shell opened on a PC and connect wirelessly to that PC with adb then you could use the PC to turn it off but it would disconnect at this point
Hope you find a working solution, feel free to bounce ideas or questions off me, best of luck!
Sent from my Nexus 4 using XDA Premium 4 mobile app
peanutsy said:
Hi,
This is a pretty special use case, and I hope you guys can help me put together a solution, that will help my family.
My daughter is severely autistic, but loves music. We have worked with CD's for years, but they get destroyed by herself, and are a constant source for conflict for a variety of reasons - because we need to control her access to them (music-time vs. sleep-time for instance) and control the volume. I have to think, I could come up with a technical solution, so we could avoid physical media altogether.
Here is what I would like:
Take our Nexus 7, fill it up with music (maybe google music), mount it on the wall in her room, hook speakers up to it and let her control it as she likes. However, we need to be able to override, ie. lock her out of it if necessary, control the volume etc. I also do not want her to be able to screw up the Nexus by doing other stuff on it, so I would like to be able to lock it to just the music app, unless myself or my wife unlock it to do some sort of maintenance.
To sum up:
- Nexus 7
- Control volume / lock remotely - from pc or another android phone
- Music software
- Access restricted to limited list of apps (music app first and foremost)
How could this be done on Android? What software should I use?
I hope you guys have some good suggestions, so I can get a nice solution to this. Thanks in advance.
Click to expand...
Click to collapse
I may have a working solution for you, But just bare with me whilst i gather it together to make sure it works like i think it will, I'm heading off to sleep now for work but when i get out i'll be right back at it again and hopefully will be able to deliver a working solution for you tomorrow.
Thanks, look forward to what you have come up with.
peanutsy said:
Hi,
This is a pretty special use case, and I hope you guys can help me put together a solution, that will help my family.
My daughter is severely autistic, but loves music. We have worked with CD's for years, but they get destroyed by herself, and are a constant source for conflict for a variety of reasons - because we need to control her access to them (music-time vs. sleep-time for instance) and control the volume. I have to think, I could come up with a technical solution, so we could avoid physical media altogether.
Here is what I would like:
Take our Nexus 7, fill it up with music (maybe google music), mount it on the wall in her room, hook speakers up to it and let her control it as she likes. However, we need to be able to override, ie. lock her out of it if necessary, control the volume etc. I also do not want her to be able to screw up the Nexus by doing other stuff on it, so I would like to be able to lock it to just the music app, unless myself or my wife unlock it to do some sort of maintenance.
To sum up:
- Nexus 7
- Control volume / lock remotely - from pc or another android phone
- Music software
- Access restricted to limited list of apps (music app first and foremost)
How could this be done on Android? What software should I use?
I hope you guys have some good suggestions, so I can get a nice solution to this. Thanks in advance.
Click to expand...
Click to collapse
Well i hope you can bascially connect the nexus to the speakers and use a app locker just sure u wont lock the music app then it would lock other apps and through it you can allow or deny access to other apps and check these links to remotely use the nexus via ur pc http://drippler.com/google/nexus_7#!766313
http://www.yumapk.com/how-to-control-your-nexus-7-on-pc-with-airdroid.html
Hope it might help!
Best of luck
Hit thanks button if i helped
After finally getting root on the device, I hours trying to get a VNC server to work - with no luck at all.
Airdroid works, and while it is pretty damn clever piece of software, it does not really allow me meet any of my requirements. Yes, I can lock the device, but I cannot turn off the sound or exit a running application.
Limiting a profile to just a few apps seems doable, but if we cannot control volume and access to the device remotely, I cannot wall-mount it and prevent her taking it and damaging or losing it. Having a connected to a PC permanently becomes to complicated.
I am considering maybe just putting all her music on a mediaserver, installing an app for it on the nexus (like Plex) - and then creating a kill-switch for the mediaserver. That way there is no local music on the device, and I am able to cut the connection to the music, which I think eliminates the requirement to remote control the device itself.
Did you try setting up adb wirelessly? This would at least allow you to kill the app or turn off device, I don't know if you could change volume though.
Looking through the app store their are many child lock apps, maybe dig around there a bit and see if there is something that has more controls that can be done remotely
Sent from my Nexus 4 using XDA Premium 4 mobile app
If I may, the style of music makes a difference too. Easy listening gospel being the best and the Lord being the very top, He listens and His yoke is light.
peanutsy said:
I am considering maybe just putting all her music on a mediaserver, installing an app for it on the nexus (like Plex) - and then creating a kill-switch for the mediaserver. That way there is no local music on the device, and I am able to cut the connection to the music, which I think eliminates the requirement to remote control the device itself.
Click to expand...
Click to collapse
I have now set up plex with a specific section for her music, shared that folder with a user account I logged in with on the Android Plex App - and she can now see her music collection and play it. I have not yet found an elegant (read: wife friendly) way to "unshare" her music library - without taking down all plex server sharing. But I will figure something out.
I have also managed to limit the user profile on her nexus 7 to just the plex media player. However, there are many options for her to mess with in the player itself, that I am unable to lock down. I am also unable to let her use the youtube app, as it does not run on "restricted profiles" - but that was just a "nice to have", not a "need to have".
Input and ideas are still welcome.
peanutsy said:
I have now set up plex with a specific section for her music, shared that folder with a user account I logged in with on the Android Plex App - and she can now see her music collection and play it. I have not yet found an elegant (read: wife friendly) way to "unshare" her music library - without taking down all plex server sharing. But I will figure something out.
I have also managed to limit the user profile on her nexus 7 to just the plex media player. However, there are many options for her to mess with in the player itself, that I am unable to lock down. I am also unable to let her use the youtube app, as it does not run on "restricted profiles" - but that was just a "nice to have", not a "need to have".
Input and ideas are still welcome.
Click to expand...
Click to collapse
try applocker it might let you active apps you need and deactive apps you dont and i dont have a solution for the music app thingy which has less settings.. Still working on it.. Ill let you know as soon as i find something. Till then try this one "Songbird Music App"
Please hit thanks if i helped!
Good Luck!

Torque Pro OBD app and data logging

So i got myself an OBD bluetooth scanner and the Torque app...bloody brilliant.
So much information!
anyway, i cant seem to get it to upload data logs to the web viewer?
i have my account created and setup correctly but nothing in the web viewer when i log in.
Does anyone use the app and have any ideas on how to get this to work?
Secondary i have e-mailed myself some data logs and cant get them to open properly?
I cant seem to get Track Recorder to work with Torque Sync software, it stucks at Searching for Torque
Valiceemo said:
So i got myself an OBD bluetooth scanner and the Torque app...bloody brilliant.
So much information!
anyway, i cant seem to get it to upload data logs to the web viewer?
i have my account created and setup correctly but nothing in the web viewer when i log in.
Does anyone use the app and have any ideas on how to get this to work?
Secondary i have e-mailed myself some data logs and cant get them to open properly?
Click to expand...
Click to collapse
I imagine the particular posters have found answers to their problems seeing as this thread
dates from 2014 but I thought it might be worthwhile answering all the same as I ran in to the same niggles when I began using this app so if anyone searching these issues subsequently may find some worth from my reply.
First of all as a far as experience and knowledge is concerned. Firstly with cars;fixing,modifying, engine management tuning, obd2, diagnostics. Basically my auto knowledge is extremely wide and extensive from approx 35 years of obsession and getting stuck in an the deep end whereas my knowledge and experience of computers and smart phone tech is on much, much shakier ground
In fact, for those of my vintage. i.e late 30s,early 40s remember when we were kids. and programmable VCRs were the height of cutting edga technology. Well I'm like the way our parents and grand parents were then. i.e pretty much baffled by it and even following the instructions it was hit and miss whether you actually managed to record that film rhat was on at 4am lol.
So for the second issue brought up by the OP it doesn't matter whether you email yourself the log file or not (I found the few times i tried it that the file wouldn't attach and when it did the problem was the same anyway) you need Microsoft Office or any other type of office suite to view the files. On the pc i have Microsoft office but had to download an app to my phone to view. csv files. Again an office suite that not only displays. csv files but puts them into a spreadsheet format is required.
As for the first issue it's preferable in every way to view the site. on a pc because on the phone display the actual box to sign into is off screen and takes a little bit of zooming out and seaching to find, the same goes after you have signed in when another box appears with a list of the logs files recorded and the tab to choose it. This is where my lack of fundamental computer/web knowledge comes in. I can't tell you why it doesn't sit nicely inti an easily accessible mobile format but it doesn't. Once you've found the first sign in box/pop up it becomes simple, annoying but simple.
As for there being nothing after signing into the webview site successfully all I can assume is either you've no log files to view which you should have if it's all been set up correctly, including choosing which PIDs to send to logfile or the pop up/window where you click on your logfiles is right off screen and has to be looked for. Of course you don't get that problem if accessed using your desktop.

[APP] Standalone navigation app for Wear OS!

I made a standalone navigation app for Wear OS! Here's the link to the app: https://play.google.com/store/apps/details?id=uk.co.onibaku.standalonewearmap
Here's the full description on the app so you can get a glance at the features:
Users can type in a location, or long press on the map to input a destination. They can choose to travel via walking, cycling or car.
The app will navigate the user from their current location to the destination using turn-by-turn navigation. Each step is highlighted on the path, with text to show you what action to take, and how long until you reach that step. The map rotates along with the device, so will follow the forward-facing direction of the watch.
The app only needs an internet connection for the initial retrieval of the directions. After that, it solely relies on GPS until the user arrives at the destination.
This (obviously) only works on watches that have GPS.
If you have any suggestions at all, I'd love to know them.
The next feature I plan to implement is importing a GPX file in from Google Drive, so you can navigate a more unorthodox/scenic route, which would suits cyclists. I initially developed this for when I go cycling, as we don't usually want to take the fastest route somewhere.
Let me know if there any burning features that are needed in this, and I'll do my best to deliver. This is a small side-project, so I don't have too much time to work on it, but I find it quite useful personally, and I hope others will, too.
Someone suggested I release a demo version so people can try it and see if they wish to buy it. I have released one here
It only has the dropped pin functionality, and only allows walking as a navigation mode. The zoom is also locked.
Gentatsu said:
I made a standalone navigation app for Wear OS! Here's the link to the app: https://play.google.com/store/apps/details?id=uk.co.onibaku.standalonewearmap
Here's the full description on the app so you can get a glance at the features:
Users can type in a location, or long press on the map to input a destination. They can choose to travel via walking, cycling or car.
The app will navigate the user from their current location to the destination using turn-by-turn navigation. Each step is highlighted on the path, with text to show you what action to take, and how long until you reach that step. The map rotates along with the device, so will follow the forward-facing direction of the watch.
The app only needs an internet connection for the initial retrieval of the directions. After that, it solely relies on GPS until the user arrives at the destination.
This (obviously) only works on watches that have GPS.
If you have any suggestions at all, I'd love to know them.
The next feature I plan to implement is importing a GPX file in from Google Drive, so you can navigate a more unorthodox/scenic route, which would suits cyclists. I initially developed this for when I go cycling, as we don't usually want to take the fastest route somewhere.
Let me know if there any burning features that are needed in this, and I'll do my best to deliver. This is a small side-project, so I don't have too much time to work on it, but I find it quite useful personally, and I hope others will, too.
Someone suggested I release a demo version so people can try it and see if they wish to buy it. I have released one here
It only has the dropped pin functionality, and only allows walking as a navigation mode. The zoom is also locked.
Click to expand...
Click to collapse
This is looking really good. I want true standalone navigation on my Huawei Watch 2 4G. It has a sim so loads the route standalone and seems to be able to do everything expected...i'm trying the demo version now.
One question though...unless i'm missing something..how do you exit the app? I'm currently having to force close it.
(And as a side note have you checked out the Wear OS app Ghostracer? You can import a gpx file and follow your progress on a map on the watch. Maps are downloadable to the watch, although ive never tried that. My watch has a sim so updates the map as im riding using the watches data. Heavy on the battery though.)
ruggs1234 said:
This is looking really good. I want true standalone navigation on my Huawei Watch 2 4G. It has a sim so loads the route standalone and seems to be able to do everything expected...i'm trying the demo version now.
One question though...unless i'm missing something..how do you exit the app? I'm currently having to force close it.
(And as a side note have you checked out the Wear OS app Ghostracer? You can import a gpx file and follow your progress on a map on the watch. Maps are downloadable to the watch, although ive never tried that. My watch has a sim so updates the map as im riding using the watches data. Heavy on the battery though.)
Click to expand...
Click to collapse
I had not realised that the app does not cease to use GPS whilst it is in sleep mode, so I have added a button to exit the app properly when you drag down. I've just released it now.
I have had a look at it, but it doesn't seem to work unless you have an android phone. I am currently looking into offline maps and importing GPX files. Do you know if it does that via the android app, and how it imports it? I was looking to use Google drive, as that seems to be the only viable storage solution supported on Wear atm.
Gentatsu said:
I had not realised that the app does not cease to use GPS whilst it is in sleep mode, so I have added a button to exit the app properly when you drag down. I've just released it now.
I have had a look at it, but it doesn't seem to work unless you have an android phone. I am currently looking into offline maps and importing GPX files. Do you know if it does that via the android app, and how it imports it? I was looking to use Google drive, as that seems to be the only viable storage solution supported on Wear atm.
Click to expand...
Click to collapse
Thankyou for the exit button, works great. Having tested the demo app i'm happy, and I will purchase. One further comment, the battery drain is heavy, as expected. Any chance of an ambient mode while the map is running to save battery? I may be pushing my luck, but I can only ask!
Ghostracer does indeed need a companion Android app on the phone. The gpx file is loaded into the app on the phone (using a file manager) then passed to the Ghostracer app on the watch. Maps are treated the same, but I just use the data from my sim in the watch to load maps as I ride when needed. You can follow a gpx route standalone on the watch in a similar way to following the route on your app. I am not connected to Ghostracer in any way, I just think its a wonderful app for cyclists and runners (within the watches battery limitations). And the free version allows you to test all its features. It might not be right for you, but it was worth a mention based on what you said earlier. (And the map screen has an ambient mode.... )
ruggs1234 said:
Thankyou for the exit button, works great. Having tested the demo app i'm happy, and I will purchase. One further comment, the battery drain is heavy, as expected. Any chance of an ambient mode while the map is running to save battery? I may be pushing my luck, but I can only ask!
Ghostracer does indeed need a companion Android app on the phone. The gpx file is loaded into the app on the phone (using a file manager) then passed to the Ghostracer app on the watch. Maps are treated the same, but I just use the data from my sim in the watch to load maps as I ride when needed. You can follow a gpx route standalone on the watch in a similar way to following the route on your app. I am not connected to Ghostracer in any way, I just think its a wonderful app for cyclists and runners (within the watches battery limitations). And the free version allows you to test all its features. It might not be right for you, but it was worth a mention based on what you said earlier. (And the map screen has an ambient mode.... )
Click to expand...
Click to collapse
Great . I did play around with the ambient mode, but it was just the same as the standard google maps ambient mode. It takes away the turn-by-turn, location, and path. If I could persist these, and set the GPS to update every 30 secs - 1 minute, I'd probably keep it, but I'm not sure how. I'd like to stick in options to set the GPS update frequency, or have the screen turn back on only for upcoming turns.
That's really cool! That's essentially what I would have liked on my watch but standalone. I really don't like the idea that you HAVE to use a companion app, especially when it's not available for iOS. I know they're competing watches, but I love the price point of android watches compared to Apple's, and their features shouldn't pale in comparison by way of hardware.
How does their ambient map work, if you don't mind me asking? I'd like to look into it. What does their paid version allow you to do? I only had a paid version before someone mentioned to put the free one on, just to give people a flavour of it. I tried to emphasise the main bit, which was the turn-by-turn navigation. The search and other transportation modes were secondary.
Cheers for the feedback and suggestions, though! I really do appreciate it! Let me know if there's anything else you'd like.
Gentatsu said:
Great . I did play around with the ambient mode, but it was just the same as the standard google maps ambient mode. It takes away the turn-by-turn, location, and path. If I could persist these, and set the GPS to update every 30 secs - 1 minute, I'd probably keep it, but I'm not sure how. I'd like to stick in options to set the GPS update frequency, or have the screen turn back on only for upcoming turns.
That's really cool! That's essentially what I would have liked on my watch but standalone. I really don't like the idea that you HAVE to use a companion app, especially when it's not available for iOS. I know they're competing watches, but I love the price point of android watches compared to Apple's, and their features shouldn't pale in comparison by way of hardware.
How does their ambient map work, if you don't mind me asking? I'd like to look into it. What does their paid version allow you to do? I only had a paid version before someone mentioned to put the free one on, just to give people a flavour of it. I tried to emphasise the main bit, which was the turn-by-turn navigation. The search and other transportation modes were secondary.
Cheers for the feedback and suggestions, though! I really do appreciate it! Let me know if there's anything else you'd like.
Click to expand...
Click to collapse
Ghostracers ambient map is black background with white markings until you lift your wrist...but that might not work when using your app while driving (watch off the wrist?).
I've now purchased your app (Google made that hard work!)...all still good. One question...when I zoom the map in the map un-zooms straight back. Any way to make the zoom stick?
ruggs1234 said:
Ghostracers ambient map is black background with white markings until you lift your wrist...but that might not work when using your app while driving (watch off the wrist?).
I've now purchased your app (Google made that hard work!)...all still good. One question...when I zoom the map in the map un-zooms straight back. Any way to make the zoom stick?
Click to expand...
Click to collapse
Do the markings include the path/trail? I've used the black background one before, and the building outlines are (kinda) white. Yeah, I do have my watch affixed to my handlebars on my bicycle.
Great - Thanks! It's much appreciated! How come it was hard work, if you don't mind me asking? Ah, yep. That was one of the first things I forgot to change! I completely forgot about it! I've made it so that if you zoom/pan, it'll stick unless you press the "my location" button again.
Huawei watch 2 built-in GPS not working anymore
ruggs1234 said:
Thankyou for the exit button, works great. Having tested the demo app i'm happy, and I will purchase. One further comment, the battery drain is heavy, as expected. Any chance of an ambient mode while the map is running to save battery? I may be pushing my luck, but I can only ask!
Ghostracer does indeed need a companion Android app on the phone. The gpx file is loaded into the app on the phone (using a file manager) then passed to the Ghostracer app on the watch. Maps are treated the same, but I just use the data from my sim in the watch to load maps as I ride when needed. You can follow a gpx route standalone on the watch in a similar way to following the route on your app. I am not connected to Ghostracer in any way, I just think its a wonderful app for cyclists and runners (within the watches battery limitations). And the free version allows you to test all its features. It might not be right for you, but it was worth a mention based on what you said earlier. (And the map screen has an ambient mode.... )
Click to expand...
Click to collapse
Hi ruggs1234, it was a long time since you wrote your experience with this app. I downloaded the demo today and I tested it. Looks like since last Google's update, the huawei watch 2 doesn't use its built-in standalone GPS. Please, would you mind to check whether you are having this problem now? The only way I got it work was by connecting the watch to a phone through Bluetooth.
Kind regards, Angel
angelrc96 said:
Hi ruggs1234, it was a long time since you wrote your experience with this app. I downloaded the demo today and I tested it. Looks like since last Google's update, the huawei watch 2 doesn't use its built-in standalone GPS. Please, would you mind to check whether you are having this problem now? The only way I got it work was by connecting the watch to a phone through Bluetooth.
Kind regards, Angel
Click to expand...
Click to collapse
Hello Angel,
The app still works ok on my watch, I tested it yesterday.
With my phone switched OFF I use my watches inbuilt sim to start the route (the app needs data to download the initial route, it can use the connected mobile but mine was switched off). I then switch off the sim in my watch and follow the route using only the gps in the watch. The app worked as it always has.
HOWEVER, my watch isn't running the latest version of Wear OS (it's running Wear OS 2.0, Home app 2.16). I never update anything Google if i'm not forced too, their updates often break more things than they fix. Everything I use on the watch works great and i'd like it to stay that way....
Hi,
well, I gave it a test (full paid version) - TicWatch 3 Pro 4g/LTE (all up to date). It doesn't work. All tested in standalone mode (no phone involved).
- app crashes when there is no GPS fix (GPS is on, but no fix yet)
- when I set an route to navigate (pin or search) it just endlessly shows progress circle and nothing else happens (GPS on with fix, LTE on and working)
So...
BR, Doman.
I installed the Demo version on my ticwatch 3 pro gps (updated everything to current versions and no modifications (yet))
App is starting, map is not showing, just the gps location button on the left and a white/grey screen. I can pin a location on the white screen and its actually getting a location next to me and tries to route there - but without any map showing.
Any app for Gear S3 ?

Happy Colour Offline Compatibility Android Pixel 6 Pro

Hey there guys, I have a question first and foremost.
If an app updates daily, is there any way to make an app still be able to be updated online daily, while also having the functions to work while you are offline?
There are many people that travel, and don't have internet or phone service while they are commuting or waiting for someone or something, relaxing at home, at a campground in the wilderness, or underground in the subway, or maybe even up high on a mountain.
If there is a way to make this work, I would like to know what you guys and gals would suggest on what to do to get this started.
Some of the requirements of my hypothetical project would be as follows;
Needs to retain the Daily Update Feature so that the app can withdraw from the Happy Colour Server.
Has to have some working code workaround where a certain allotment of storage space can be used to store the app data (including the scrolling and entering the Picture that you want to color and complete) on a device.
(Currently, you can scroll the app for a little while and the coloring options will appear, but when clicking on a selection, it is not able to load.
That's pretty much the jist of it.. if you guys can give me suggestions or even remark on if this can be done, that would be great. I know that it would take some work, but if it seems like its plausible, we can see where this thing goes as a team and maybe make it a paid project really depends on how much work would need to be done.
Thanks to those of you that have read this and really looking forward to hearing your ideas and thoughts.
-MCrandall

Categories

Resources