Q&A for [RECOVERY][YP-G70] PhilZ Touch v6.57.5 [METICULUS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][YP-G70] PhilZ Touch v6.57.5 [METICULUS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Error flashing the Recovery
Sorry if i am asking a noob question but when i flash the philz recovery from my current cwm recovery of rj's Kernel, it says error this file is for venturi usa and installation aborted and thus it does'nt get flashed . Can u please guide me i am relatively now to flashing things in my SGP 5.0 . Also i have the one with physical hardware button which i think is the international variant so is there any other installable file for it???? Please reply :fingers-crossed:
§h!t!j said:
Sorry if i am asking a noob question but when i flash the philz recovery from my current cwm recovery of rj's Kernel, it says error this file is for venturi usa and installation aborted and thus it does'nt get flashed . Can u please guide me i am relatively now to flashing things in my SGP 5.0 . Also i have the one with physical hardware button which i think is the international variant so is there any other installable file for it???? Please reply :fingers-crossed:
Click to expand...
Click to collapse
As noted it the thread, Philz Touch only works for the "NUTELLA" kernel. Further more, the NUTELLA kernel only works on KitKat ROMS. :good:
Meticulus said:
As noted it the thread, Philz Touch only works for the "NUTELLA" kernel. Further more, the NUTELLA kernel only works on KitKat ROMS. :good:
Click to expand...
Click to collapse
Oh I thought that Nutella kernel was required for the alternative recovery.
Anyway thank u for your quick and informative reply
Also can u tell me just 1 more thing that is I flash your carbon rom then will the Nutella kernel be flashed by itself or I have search it and then flash it :fingers-crossed:
§h!t!j said:
Oh I thought that Nutella kernel was required for the alternative recovery.
Anyway thank u for your quick and informative reply
Also can u tell me just 1 more thing that is I flash your carbon rom then will the Nutella kernel be flashed by itself or I have search it and then flash it :fingers-crossed:
Click to expand...
Click to collapse
Philz-Touch IS an "alternative recovery"...
Newest Carbon has Nutella.
Related
Q&A for [ROOT] 14.2.A.1.136 Stock Kernel with Dual Recovery and Ric disabled
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT] 14.2.A.1.136 Stock Kernel with Dual Recovery and Ric disabled. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
kanej2006 said:
Jackie or anyone else, please help me with one thing, pretty please!
I am using a custom 5.02 Lollipop rom. The Kernal used within the rom unfortunately uses CM source/Cyanogen recovery which is $hit!!!
When entering recovery, I'm unable to do anything. Flashing ANYTHING including apps or roms fails every time. I keep getting verification fail or something similar followed by errors... Aside from formatting data, cache the recovery is useless.
Previously I was using stock Lollipop 5.0. I used Jackie's dual recovery which is no doubt the best there. :laugh:
Also on Kitkat I was using Jackie's custom kernal which had the best of both, CWM & TWRP dual recovery.
This is just what I need on my custom Lollipop rom. I require dual recovery which includes CWM & TWRP.
Please could someone kindly assist on how I can flash Jackie's dual recovery CWM/TWRP WITHOUT losing data or experiencing bootloops!
I tried several times previously to flash Jackie's dual boot recovery and this resulted in constant bootloops. In the end I had to revert to stock and re-flash the rom all over again.
Many thanks for anyone who can assist.
Click to expand...
Click to collapse
I used Jackie kernel for my first successful ROOT.
I'm using multi ROM now. Gives very useful TWRP. Was very easy to install as I was running candy5 which was already kexec patched.
morestupidemailnames said:
I used Jackie kernel for my first successful ROOT.
I'm using multi ROM now. Gives very useful TWRP. Was very easy to install as I was running candy5 which was already kexec patched.
Click to expand...
Click to collapse
Thanks for the reply. However, Jackie said his dual boot kernal was not compatible with Lollipop.
kanej2006 said:
Thanks for the reply. However, Jackie said his dual boot kernal was not compatible with Lollipop.
Click to expand...
Click to collapse
That's why I use multirom.
morestupidemailnames said:
That's why I use multirom.
Click to expand...
Click to collapse
Is multirom compatible with Cyanogen Mod 12? If so could you please give me the link for multirom?
Thanks.
kanej2006 said:
Is multirom compatible with Cyanogen Mod 12? If so could you please give me the link for multirom?
Thanks.
Click to expand...
Click to collapse
I'm not 100% sure since I've not tried straight cm.
I have candy5 as a primary ROM. Then I got multirom manager from play store. Followed steps to get multirom.
Then I leave candy5 all set up functioning the way I want, and play with other ROMs as secondaries. I mainly use validus, but have successfully set up liquid smooth, aicp, resurrection as secondary ROMs to try. I download straight to phone then flash zips from the multirom twrp.
Works for me. Although it didn't like the scrubber gpe port.
There is a multirom thread under xzu original android development.
Good luck
morestupidemailnames said:
I'm not 100% sure since I've not tried straight cm.
I have candy5 as a primary ROM. Then I got multirom manager from play store. Followed steps to get multirom.
Then I leave candy5 all set up functioning the way I want, and play with other ROMs as secondaries. I mainly use validus, but have successfully set up liquid smooth, aicp, resurrection as secondary ROMs to try. I download straight to phone then flash zips from the multirom twrp.
Works for me. Although it didn't like the scrubber gpe port.
There is a multirom thread under xzu original android development.
Good luck
Click to expand...
Click to collapse
Thank you so much for all your help, much appreciated. I also tried several roms, unfortunately none were perfect. GPE Port is the best for battery and stability. However, other roms such as resurrection and Cyanogen were better for themes, customization and being much faster. However, battery life was twice as bad as Scrubber port...
All I want now is to use TWRP or Clock work mod recovery since I'm stuck with Cyanogen Mod recovery which is $hit. Previously I attempted to flash CWM recovery and I was left with boot loops...
Q&A for [RECOVERY] TWRP Recovery 2.8.5.0 for Samsung Galaxy V SM-G313HZ
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP Recovery 2.8.5.0 for Samsung Galaxy V SM-G313HZ. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Help
Tried flashing this custom recovery on my newly bought Galaxy V SM-G313HZ but somehow it didnt work, come out black and white screen when tried to go to recovery mode...followed ya instruction to the letter too...can you please help me out on this?
ya can see from the snapshot below...since i'm new in this can't post a link ehh...pffttt
s28.postimg.org/9jezuhqwd/IMG_20150311_235019_hdr.jpg
s28.postimg.org/lmowvsrcd/IMG_20150311_235132_hdr.jpg
s28.postimg.org/q4mma5i0d/IMG_20150311_235309_hdr.jpg
s28.postimg.org/5tjyfc4fh/IMG_20150311_235315_hdr.jpg
s28.postimg.org/pydiksy99/IMG_20150311_235321_hdr.jpg
:crying::crying::crying::crying:
Hi
Not working please fix.
flash missing !
when flashinh twrp via odin....it is completed in 4sec.but recovery is not flashed.what is the problem behind can u say pls.
rooting samsung galaxy v kitkat
kenapa hp sgv saya gabisa pasang twrp atau cwm ya? lewat odin juga sama.. pas masuk recovery beres instal cwm malah layarnya separo hitam separo putih
Thank you for your guide, managed to get TWRP and rooted using your guide.
My question, if i reflash stock recovery using twrp will i keep it root?
cattv said:
Thank you for your guide, managed to get TWRP and rooted using your guide.
My question, if i reflash stock recovery using twrp will i keep it root?
Click to expand...
Click to collapse
Recovery is in the different partition, so it doesn't affect the /system partition, which has your OS rooted unless you reflash the whole stock ROM.
doesntexits said:
Recovery is in the different partition, so it doesn't affect the /system partition, which has your OS rooted unless you reflash the whole stock ROM.
Click to expand...
Click to collapse
ok thx
I should ask , because of the rooted status (even tho i'm on stock recovery) i wouldn't get the OTA update right?
Whats the safest way to flash stock recovery? through TWRP or an apps like flashify?
cattv said:
ok thx
I should ask , because of the rooted status (even tho i'm on stock recovery) i wouldn't get the OTA update right?
Whats the safest way to flash stock recovery? through TWRP or an apps like flashify?
Click to expand...
Click to collapse
In fact, you can get OTA normally by installing Xposed then install Wanam Xposed, choose fake system status in security hacks and restart > You get official system status.
About that recovery, download the stock ROM and extract it (its tar.md5 or md5), get the recovery.img, copy it to your SD card then flash it with TWRP (remember to press the Image button on Install) >> You get stock recovery.
Press thanks if i helped
doesntexits said:
In fact, you can get OTA normally by installing Xposed then install Wanam Xposed, choose fake system status in security hacks and restart > You get official system status.
About that recovery, download the stock ROM and extract it (its tar.md5 or md5), get the recovery.img, copy it to your SD card then flash it with TWRP (remember to press the Image button on Install) >> You get stock recovery.
Press thanks if i helped
Click to expand...
Click to collapse
This is great, you gave me more than what i asked for
Thank u
cattv said:
This is great, you gave me more than what i asked for
Thank u
Click to expand...
Click to collapse
You welcome
xactor said:
Yes flashed using Odin 4 and as well as Odin 3.0.1
Click to expand...
Click to collapse
try to port this twrp before install it. and check the recovery.fstab. compare with your device partition.
Hi,
I have the samsung unlocked and rooted on a custom rom on 4.0.4
Wanamlite Rom
I would like to install the latest CyanogenMod 12.1 on it but i have read this:
Make sure you're using a Kitkat Compatible Recovery
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-cyanogenmod-12-t2955551
I have the clockworkmod recovery PhilZ Touch 3 6.0.1.5 but I am not sure if that one is a KitKat compatible (I imagine it is) or if I need to do something else to install the new ROM (apart from the standard instructions I mean, wipe, etc).
Thank you very much
darkpollo said:
Hi,
I have the samsung unlocked and rooted on a custom rom on 4.0.4
Wanamlite Rom
I would like to install the latest CyanogenMod 12.1 on it but i have read this:
http://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-cyanogenmod-12-t2955551
I have the clockworkmod recovery PhilZ Touch 3 6.0.1.5 but I am not sure if that one is a KitKat compatible (I imagine it is) or if I need to do something else to install the new ROM (apart from the standard instructions I mean, wipe, etc).
Thank you very much
Click to expand...
Click to collapse
Hi
Just flash the latest recovery from philz thread here
You want philz 6.48.4 .zip. Just flash it from recovery, reboot to recovery(not system), then flash the rom, gapps etc as normal after full wipe
noppy22 said:
Hi
Just flash the latest recovery from philz thread here
You want philz 6.48.4 .zip. Just flash it from recovery, reboot to recovery(not system), then flash the rom, gapps etc as normal after full wipe
Click to expand...
Click to collapse
Great info. Thanks!!
I was looking but there is too many posts here and search is difficult.
:good:
darkpollo said:
Great info. Thanks!!
Deleted
Click to expand...
Click to collapse
@gsstudios
Just FYI, I didn't post the direct link because of the request from the author of the thread in post #3. I know it was only an oversight on your part
<< Posting direct links to below files is not allowed. Please post links to this thread/post instead >>
Click to expand...
Click to collapse
noppy22 said:
@gsstudios
Just FYI, I didn't post the direct link because of the request from the author of the thread in post #3. I know it was only an oversight on your part
Click to expand...
Click to collapse
hehe, I guess it would be alright for only one person to see it. Will remove once the person has downloaded it. The project is dead, but of course I still respect the devs. I'm sure he'll understand that posting one link won't hurt. Thanks for point that out mate!
Technically it's not a direct link, moreover it is a link to the folder containing the files. So you could say it is a relative link (or something called like that).
gsstudios said:
hehe, I guess it would be alright for only one person to see it. Will remove once the person has downloaded it. The project is dead, but of course I still respect the devs. I'm sure he'll understand that posting one link won't hurt. Thanks for point that out mate!
Technically it's not a direct link, moreover it is a link to the folder containing the files. So you could say it is a relative link (or something called like that).
Click to expand...
Click to collapse
Thank you. I got it. You can remove the link if you want.
Q&A for [ROM] [5.0.2] [OFFICIAL] Pre rooted Lollipop 10.6.A.0.454
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.0.2] [OFFICIAL] Pre rooted Lollipop 10.6.A.0.454. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi there,
I first tried building my own stock pre-rooted rom with Flashtool and PRFCreator and ended up in getting a bootloop...
So then flashed 10.1.C.0.370, rooted it and installed XZDR. I did clean the Data and Dalvik cache and then, from TWRP, I flashed your zip.
But then again I ended up in a bootloop.
Any ideas on what I did wrong?
Thanks in advance!
Dalewn said:
Hi there,
I tried using your SGP311 flashable.zip, but I end up in getting a bootloop...
I first tried building my own stock pre-rooted with Flashtool and PRFCreator and ended up the same way.
I did clean the Data and Dalvik cache. I started off of a 10.1.C.0.370 with dualrecovery and root and flashed the zip via TWRP.
Any ideas on what I did wrong?
Thanks in advance!
Click to expand...
Click to collapse
Are you flashing 311 build on 312 or 311?
Also, I'd recommend to flash this over a kitkat build as that might solve your issue because the ROM components that you have might not be compatible with 5.0. Also, can you please specify which version of TWRP you have installed?
Thank you
Azar_98 said:
Are you flashing 311 build on 312 or 311?
Also, I'd recommend to flash this over a kitkat build as that might solve your issue because the ROM components that you have might not be compatible with 5.0. Also, can you please specify which version of TWRP you have installed?
Thank you
Click to expand...
Click to collapse
Forgot to mention: Yes, I'm using a SGP311 of cause.
I was using NUT's XZDualRecovery 2.8.15, which again (I think) is using TWRP v2.5
So, your suggestion is to go to 4.4 first and then try flashing L?
Dalewn said:
Forgot to mention: Yes, I'm using a SGP311 of cause.
I was using NUT's XZDualRecovery 2.8.15, which again (I think) is using TWRP v2.5
So, your suggestion is to go to 4.4 first and then try flashing L?
Click to expand...
Click to collapse
Yes I'd try with 4.4. However, you'll lose recovery when you install Lollipop, meaning no more flashing unless you decide to flash 4.4 back from 5.0
SGP312 Lollipop released
Hello,
Could it be possible to have now the SGP312 (32G) pre-rooted Lollipop 10.6.A.0.454 version ? It has been released by Sony now...
Thanks in advance
proceed78 said:
Hello,
Could it be possible to have now the SGP312 (32G) pre-rooted Lollipop 10.6.A.0.454 version ? It has been released by Sony now...
Thanks in advance
Click to expand...
Click to collapse
downloading and rooting right now, thanks for suggestion
EDIT: done!
Q&A for My phone stuck at cwm
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for My phone stuck at cwm. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Even my phone stuck at cwm recovery
mysteryno46 said:
If you know how to use odin and flash the clean stock rom, it has to boot. There is no way it won't until unless you make some mistake and the flashing fails in between. After flashing the stock rom, initial boot will take long time, you need to keep patience.
Go ahead and flash the stock rom via odin.
Click to expand...
Click to collapse
I have samsung galaxy grand quattro
I even flashed with stock recovery but then it shows grand quattro logo and it goes to android based recovery plz write to me at [email protected] Please help needed im facing this problem from about 2 days
Replied in your email.
Soma964 said:
I have samsung galaxy grand quattro
I even flashed with stock recovery but then it shows grand quattro logo and it goes to android based recovery plz write to me at [email protected] Please help needed im facing this problem from about 2 days
Click to expand...
Click to collapse
Replied in your email.
help me
Soma964 said:
I have samsung galaxy grand quattro
I even flashed with stock recovery but then it shows grand quattro logo and it goes to android based recovery plz write to me at [email protected] Please help needed im facing this problem from about 2 days
Click to expand...
Click to collapse
and also send me stock rom link
mastan786 said:
and also send me stock rom link
Click to expand...
Click to collapse
yo can download the stock rom from http://www.sammobile.com/firmwares/
You can enter in recovery mode irrespective of the ROM you flashed on your cell.
further i like you to clear your cache and dalvik cache while in recovery mode and restart your phone and see if it works.
i root my galaxy grand quattro and it stucked at cwm and i updated its firmware by u
i root my galaxy grand quattro and it stucked at cwm and i updated its firmware by using kies and again i tried to root my phone ,i installed cwm in my phone but while trying to install super su it says aborted help me plz
mastan786 said:
i root my galaxy grand quattro and it stucked at cwm and i updated its firmware by using kies and again i tried to root my phone ,i installed cwm in my phone but while trying to install super su it says aborted help me plz
Click to expand...
Click to collapse
It happn for evryone at first...uhave to go through all possible articles and reviews to understand it properly.... If it doesnt work initially keep trying agn and agn..
I advise u to find the xda link from which u get super su zip file and go through every post whether any one lese is having the same probln and how he resolved it...
Sent from my GT-I8552 using XDA Free mobile app