[Q&A] Gionee Pioneer P2 Root & Custom Recovery (CWM-Unofficial) - Android Q&A, Help & Troubleshooting

Q&A for Gionee Pioneer P2 Root & Custom Recovery (CWM-Unofficial)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Gionee Pioneer P2 Root & Custom Recovery (CWM-Unofficial). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

i tried the rom of walton primo f2 as told by you sir but its not booting up it only shows the logo of walton and nothing else is happening please help me sir or father will beat me

Hi sir,
I need TWRP new vesion....
---------- Post added at 08:34 AM ---------- Previous post was at 08:30 AM ----------
kunal.solanki.965 said:
i tried the rom of walton primo f2 as told by you sir but its not booting up it only shows the logo of walton and nothing else is happening please help me sir or father will beat me
Click to expand...
Click to collapse
You did wrong the steps above or you have not installed CWM

Related

[Q&A] LAVA E-Tab XTRON & XTRON+ (RK3066)- RileyROM's HERE!!![12.8.13]

Q&A for LAVA E-Tab XTRON & XTRON+ (RK3066)- RileyROM's HERE!!![12.8.13]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for LAVA E-Tab XTRON & XTRON+ (RK3066)- RileyROM's HERE!!![12.8.13]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can you please tell me how I could install Lolipop in this tab...
"Lava Etab Xtron+"
I have searched a lot but i couldn't find a solution...
I just rooted this tab and now i need to make it run in lolipop....
is there any way to do that?....
Lava Etab XTRON with Cynaogenmod
Can anyone please assist me on how to flash the lava e-tab xtron having jb 4.1.1 to cynanogen mod?
---------- Post added at 03:07 PM ---------- Previous post was at 02:55 PM ----------
Eldhose John said:
Can you please tell me how I could install Lolipop in this tab...
"Lava Etab Xtron+"
I have searched a lot but i couldn't find a solution...
I just rooted this tab and now i need to make it run in lolipop....
is there any way to do that?....
Click to expand...
Click to collapse
John, can you please let me know the steps you followed to root the lava etab xtron?

[Q&A] [Rom][MTK6572][JB 4.2.2]Cayno X3 Rom...

Q&A for [Rom][MTK6572][JB 4.2.2]Cayno X3 Rom...
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom][MTK6572][JB 4.2.2]Cayno X3 Rom.... If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
WoW
nice work bro.keep it up
Canyon X3 rom - Micromax A90s
Can i boot canyon X3 rom on micromax A90s.
http://forum.xda-developers.com/android/development/rom-cayno-x3-rom-t2958924
help
QA Bot said:
Q&A for [Rom][MTK6572][JB 4.2.2]Cayno X3 Rom...
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom][MTK6572][JB 4.2.2]Cayno X3 Rom.... If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Please help..system ui force close
Aayuda, Help.
Hi, how are you. congratulations on the Rom.
I have only one mistake which is: Sistem IU has stopped. :crying:
and thanks for the great help from my cell is a replica of the S5 mtk 6572
prithiv28 said:
Can i boot canyon X3 rom on micromax A90s.
http://forum.xda-developers.com/android/development/rom-cayno-x3-rom-t2958924
Click to expand...
Click to collapse
No bro...Its for mt6572 only...and mt6582 users can port it too...not mt6577....
---------- Post added at 03:20 AM ---------- Previous post was at 03:17 AM ----------
satri03 said:
Please help..system ui force close
Click to expand...
Click to collapse
Did this problem showed after flashing this rom?!!Or you tried to do something with SystemUI?!!

[Q&A] [Root][CWM] Gionee Pioneer P3 - Rooting & Custom Recovery

Q&A for [Root][CWM] Gionee Pioneer P3 - Rooting & Custom Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Root][CWM] Gionee Pioneer P3 - Rooting & Custom Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
cwm for gionee p6
cwm for gionee p6..can anyone help me??
Gionee p4

[Q&A] [Q] [Hisense HS-U980] Need help device bricked.

Q&A for [Q] [Hisense HS-U980] Need help device bricked.
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Q] [Hisense HS-U980] Need help device bricked.. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
J73 said:
someone out there who is using the same device? i really made the stupid move not backing up before flashing custom unofficial roms in my device.
for now i can access fastboot but i cant flash recovery, i need like the 'update.zip' file official, its like the only hope of reviving my phone, please. thank you
Click to expand...
Click to collapse
Hi J73,
Did you come right with this?
I've also posted regarding an issue with HS-U980:
http://forum.xda-developers.com/and...k-recovery-t3101546/post60562737#post60562737
I'm not sure how similar our issues are.
Hs-u980 complete dead.... Unbrick
https://mega.co.nz/#!b4BARYjB!F2Mygw0VP4gK3TASiRN9k6-kaR-33EwFRT3QUWMTyPk
---------- Post added at 12:31 PM ---------- Previous post was at 12:23 PM ----------
https://mega.co.nz/#!b4BARYjB!F2Mygw0VP4gK3TASiRN9k6-kaR-33EwFRT3QUWMTyPk
FOR PROBLEM WRITE ME TO: [email protected]

[Q&A] [Root+Recovery][E313]Micromax Xpress 2 Rooting + Phliz Touch Recovery

Q&A for [Root+Recovery][E313]Micromax Xpress 2 Rooting + Phliz Touch Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Root+Recovery][E313]Micromax Xpress 2 Rooting + Phliz Touch Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How to install the recovery image file?
What is the procedure to install the recovery image you posted...should i use flashify or fastboot method?
Using Mobile uncle tools
please make miui custom rom for it
There are no custom ROMs aveleble for it plz make custom ROMs
---------- Post added at 05:44 AM ---------- Previous post was at 05:38 AM ----------
Tere are no devlopment for this mobile plz make any custom rom

Categories

Resources