[Q&A] ★[ROM]★[Y-DROID v2.0]★[HCL ME Y2]★[GOOGLE PLAY]★
Q&A for ★[ROM]★[Y-DROID v2.0]★[HCL ME Y2]★[GOOGLE PLAY]★[OTA]★[ROOTED]★[Boot freeze solution]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ★[ROM]★[Y-DROID v2.0]★[HCL ME Y2]★[GOOGLE PLAY]★[OTA]★[ROOTED]★[Boot freeze solution]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
showin no zip file in d card like " no file found"
it is showing no file found when i selected to instll zip frm sd card even i
place it in sd card
wifi doesn't turn on
dear Concern,
After flashing with ydroid 2 it's going ga ga,but wifi is not turning on,neither the mac address nor the wifi address is showing.Provide me a solution.
Bro can U do it for connect V3 plz...
First of all thanks RIJU95 for this really good rom !
But the only problem I'm facing is that i'm unable to mount usb pendrives/flashdrives after installing this rom.This functionality was present in the stock firmware.When i insert a drive , the mount option gets showed up in settings/storage , but it never mounts it.
Apps like stick mount work fine for pendrives but are ineffective when i try to connect an android phone via usb(it never shows up that it is connected in the phone , only charging ) and for 3G Dongles.These worked before flashing the rom.
Plz release a patch/update/method to restore native usb host support.
Thanks again for the rom
Sent from HCL ME Y2 with XDA-Free App
how to remove nova launcher
I too would like to know how I can remove the nova launcher included in this modded rom for hcl 2 that I picked up and installed from here
http://forum.xda-developers.com/showthread.php?t=2500416
and has there been any recent development on the same?
custom rom for hcl me connect 2g 2.0
heyy
I was looking for custom rom for my tablet. hcl me connect 2g 2.0. can any body send me any link for stable custom rom.
is the rom for hcl me tablet y2 is supported by hcl me connect 2g 2.0.
i did not get uimage file
when i download file there was only one file of 1 so what should i done i didnt get file and the link 2and3 are not working
can i revert to stock rom after installing this rom . if yes, then how?
Related
[Q&A] [SLD3] SLD-ULTIMATE V3 for Micromax A116, Fastest + Flawless GAMING+BIZNESS Rom
Q&A for [SLD3] SLD-ULTIMATE V3 for Micromax A116, Fastest + Flawless GAMING+BIZNESS Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
External memory card doesn't show up in my computer
External memory card doesn't show up in my computer!! Need solution!!
QA Bot said:
Q&A for [SLD3] SLD-ULTIMATE V3 for Micromax A116, Fastest + Flawless GAMING+BIZNESS Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Click to expand...
Click to collapse
At first I was confused but later realized the concept. I dont know how it will workout later but will try to monitor whenever I can. Thanks a lot.
nitinarya09 said:
External memory card doesn't show up in my computer!! Need solution!!
Click to expand...
Click to collapse
SDCard works smoothly like any other rom. No such issue. Memory card should be in FAT32 format. Reformat your card if not FAT32 format in pc and try again.
Card is in FAT32, still doesnt work, shows please insert a disk error.
Is the problem related to busybox?
Stuck on startup logo (X)
Hello Mr.Mahendra, I've tried flashing this rom and I'm encountering a startup problem. I've tried flashing it about 4 times till now but the result is same. It get's stuck after its been flashed at startup screen. I've tried waiting for like 1hr but still it doesn't load up. Please help.
how to change iSerial
Hi All,
unfortunately i selected format option while flashing stock rom via SP Tools & i lost my imei, serial#, mac address etc. However i sucessfully managed to correct the same via MauiMETA tool. Now thing is that when i connect my device in meta mode & check my serial number in MauiMETA it displays right but when i check it via Settings > About Phone > Status then it displays 0123456789ABCDEF, which is not matching with my device's. serrial#. I googled & find somewhere on stack exchange that this can be corrected through /sys/class/android_usb/android0/iSerial but when i try to open this file in edit mode it does not display anything & i can not write the file. I read somewhere that this can be done via custom init.d script but i don't know how ? can some one please help me out ?????
Thanks,
SLD and XLD Drony issue
hello sir i tried your SLD, XLD and Colossus roms for a166.
i had a good experience with them except for one problem in both SLD and XLD roms.
i use wifi connection through a proxy server and for watsapp i use drony.
it worked fine with colossus rom but in SLD as well as XLD rom drony didnt work.
whenever i turn drony on wifi connection goes off, otherwise wifi works fine.
if any work around kindly guide me
thanks a lot for your hardwork and sharing such wonderful roms with us
sandy
Lenovo P780
can we install it on lenovo p780?
keyboard problem
There is no ENTER Button on keyboard....so while messaging, its a great problem...
No network
I installed this ROM because it seemed to be the best option.It seems to work fine, but I cannot make any calls. The first sim sometimes has a connection, the second one never. I tried a p 19 baseband I found here somewhere, but the problem is still the same. What can I try still.?
Problem solved
I was able to solve the network problems with the WCFP19 modem zip found in the thread. Connection now OK and stays OK for both sims.
Good Rom
Q&A for [APP][BETA]USB Cleaver - USB Password Recovery Tool
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APP][BETA]USB Cleaver - USB Password Recovery Tool. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
usb cleaver
i installed it in my s3 (4.4)..it says unfortunately, usb cleaver has stopped...i reinstalled it but its of no use
Same here, Xperia Z 4.4.2 stock rooted
this APP i have created a while back is using a very old source which doesn't understand the new SDcard system. i have abandon the project due to some harassment from the original thread. i have not revived the project but due to the amount of questions i am getting in my inbox i will reevaluate the source and see what i can do to fix and import the newer systems.
x3
Crash on start
hello
when ever i run USB cleaver it crashes I have root and the newest version of USB cleaver but I'm running android 4.4.2 could that be the problem?
Please help
reupload payloads may be?
can some1 reupload the payloads? i couldn't find it anymore on the internet
not working
Hi, I have a moto x 2013 running blisspop ROM. I tried both versions of the app up for download the first one goes to a black screen and starts prompting app not responding. The second download does not even launch. Would really like to try this, please update me.
closes right as it opens
Usbcleaver downloaded today may 19 2015 it closes immediately after opening
Can someone please provide the payloads? all sites mentioned in the posts are not reachable anymore.... thx
4.4.4 constantly getting crash massage
App wont start
I have android lollipop 5.1.1 on my rooted nexus 5, I also have Elemantal X kernel installed, and whenever i try to open usb cleaver, it crashes.
I have tried both apk's, and both seem to not work for me.
So, captain, is there any fix for this?
help?
Usb cleaver is not working on lg g3 rooted d855 , not opening ;-; help?
thats not working
if you run this program then your mobile crash
Q&A for [ROM] UBISLATE 7C+ EDGE Working ROM/Firmware
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] UBISLATE 7C+ EDGE Working ROM/Firmware. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
ubislate 7c+ edge
Hi, My tab is ubislate 7c+ Edge. and as you said completed the img to memory card. and i inserted the memory card into tab slot then started . but tab is not starting with out memory card it is working. pls. help.
sundarchaitanya said:
Hi, My tab is ubislate 7c+ Edge. and as you said completed the img to memory card. and i inserted the memory card into tab slot then started . but tab is not starting with out memory card it is working. pls. help.
Click to expand...
Click to collapse
Seems like problem with the firmware burn process, try burning the img again!
Inverted Sensors? Touch Not Working? Here is how to Fix
Thanks for ROM File to the OP!! After trying out pretty much every stock rom available this seemed to do the trick!
I just used a different approach.
Download the Rom Img File.
Download Live Suit:
Search on Goolge for Link, XDA wont let me post links
Run Live Suit, if it closes with Driver message, please install the same from the Live Suit Folder for your os.
Follow On Screen instructions for Live suit or use the instructions at (remove xx with tt, and remove spaces):
hxxp://androidxda . com/flash-stock-rom-using-livesuit
BUT REMEMBER TO USE THE ROM FILE PROVIDED BY OP.
Worked Like a charm for by Ubislate 7c+ Edge (Camera in Corner, No Home)
THANKS A TON OP!!!!!!
[Q&A] [ROM INDEX]Karbonn s5,CherryMobile skyfire2.0,Blu studio5.0s,5.3s,True Beyond
Q&A for [ROM INDEX]Karbonn s5,CherryMobile skyfire2.0,Blu studio5.0s,5.3s,True Beyond 3G
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM INDEX]Karbonn s5,CherryMobile skyfire2.0,Blu studio5.0s,5.3s,True Beyond 3G. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Question about True Beyond 3G phone and stock ROM
Hello.
I have a True Beyond 3G device from Thailand. Is it basically the same as the Karrbon S5 Platinum? The reason I ask is that the phone was messed up and was stuck at boot image and I flashed to it a supposed stock ROM known as 'Bunso ROM (Miui)' (version 1.1) and the phone can now boot up and everything works, except wifi which refuses to turn on and find and networks.
You tap Wifi to turn it on and it just gives a message saying wifi is being turned on and then it turns itself off (the wifi icon switches to Off) and it seems wifi is not working so I cannot apply any updates that may fix this. Is this a kernel issue? If so, how can I fix the issue so that wifi is working?
Also, is it really based on a Kaarbon S5 Platinum? It looks the same and the specs are the same but my phone is single SIM and not dual-SIM, would that make a difference?'
Any help is much appreciated - thank you!
blu studio
i have a crashed blu studio that boot to the isp logo.
how can i root it? i can not get to the GUI.
help please
Can't connect to the camera
My device is karbonn titanium s5.
I am getting error can't connect to the camera.
I think I lost my camera related folder from root directory.
Can you help me??? I am trying since 4 months.
After flashing custom ROM I am getting this error.
I tried every way and now I am on stock ROM .
Still camera error is coming.
Please help. Or try anyone to upload karbonn titanium s5 nandroid backup.
plz make s6 based rom
plz make samsung s6 based rom for karbonn s5. make all te features aviable in it. thank u
Q&A for [Rom] Aqua port Lenovo A319 (custom rom)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom] Aqua port Lenovo A319 (custom rom). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
rooting problem
After flashing supersu....the device gets rooted....BT after one reboot it's unroofed again.......
Root Access
kashifcactus said:
After flashing supersu....the device gets rooted....BT after one reboot it's unroofed again.......
Click to expand...
Click to collapse
This is not a rom Bug the problem is in the recovery when you click Reboot phone
you get this message :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
choose Yes fix root :good:
the phone will reboot and you should get root access :highfive:
flash failed
I'm installon on sd card root 2 zips aqua and update su but when I'm starting installation after some seconds installation failed .
do i make something wrong?thank u
How To Install This Rom With Odin Help Please
Hi How are you..
Thanks For This Post I Cant Try This On My Phone Because this post havent give any help for how to install this rom via odin so please help me and give me suggestion [[Thank You]]
Regards
Unknown Legend
(NOTE)
If you have any Pictures so please send me [email protected]
Lenovo a319
Hi guys, Someone could give us a list of bloatwares that they are safe to remove without affecting the system?
Lenovo a319 Aqua Port rom
hello i'm here to ask if any Aqua rom users have found any bugs or problems on it please let me know if this rom Is good to go
Launcher has stopped
Hi i have recentely installed AQUA PORT ROM on my phone Its working great but i get some launcher errors from time to time Please let me know how to fix this error or if there is any update to this awesome rom that fixes this problem
How To Do It?
Ok I already know how to do it so here are the bugs that you need to fix.
- Incompatible with Gravity Box (SystemUI and Launcher3 not responding upon Xposed Module Activation)
- Always Auto-rotate on for some apps and windows. (e.g. USB Mass Storage window)
I'll update the list once I stubble some.
bug storage..
i try to mount the sd card unfornately, settings has stopped..