Related
Q&A for AT&T Stock Backups, Recoveries, OTAs and Radio IMGs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for AT&T Stock Backups, Recoveries, OTAs and Radio IMGs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
When i resturned to stock. I only flash the stock recovery at rom. And i dont the radio. What radio does? Do i still need to flash it?
Little explanations needed !!!
Hi guys,just joined this HUGE community where you can find almost everything you need for your satisfaction:good: !
But since i`m noobie would appreciate some assistance in explaining how to unlock my M8,and install Android Revolution HD ROM !!!
I spent like 5 hours yesterday reading all kind`a info about how,where,why etc ... and the more i read,the more confused i got
Things i got to find out about my M8 = *software statusfficial* *Locked* HBoot-3.19.0.0000 Radio-1.22.30306251.27G CidNum- HTC__Y13 Version Main - 3.33.401.6
So the things i`m clearly too dumb to understand is STEPS from A-Z ,to get Android Revolution HD over Original(full with crap )ROM !?!
Would appreciate if some smart developer could explain step by step what should i do first,and what last... should i get S-off first,or should i unlock it first,or make it bootable ...as i told, i read so many info ,and got rally confused about all that process :silly:
Sorry for my bad english ,and tnx in advance for all who cared to shine some knowledge in my darkness :angel:
GruziiC said:
Things i got to find out about my M8 = *software statusfficial* *Locked* HBoot-3.19.0.0000 Radio-1.22.30306251.27G CidNum- HTC__Y13 Version Main - 3.33.401.6
Click to expand...
Click to collapse
This forum section is specifically for the AT&T version of the M8, which your phone is not.
You want to post here: http://forum.xda-developers.com/htc-one-m8/help
But all you need to do to install ARHD on your phone is unlock the bootloader via HTCDev.com, install custom recovery and flash the ROM.
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
xtiandrey said:
When i resturned to stock. I only flash the stock recovery at rom. And i dont the radio. What radio does? Do i still need to flash it?
Click to expand...
Click to collapse
Its not clear what you are trying to do, or what your current configuration is. The radio is the software that makes your phone work on the cell network.
If you did not specifically flash the radio (s-off required) its still on some stock radio. Although it might not correspond to the software (main version or OS) version you are on, since its also not clear what software you are on.
Ok really stupid question...what does AT&T mean ...this forum is FULL with different abbreviations ,i got no clue what does half of them mean ... there should be made a topic for noobs like me with only explanation of abbreviations:fingers-crossed:
GruziiC said:
Ok really stupid question...what does AT&T mean ...this forum is FULL with different abbreviations ,i got no clue what does half of them mean ... there should be made a topic for noobs like me with only explanation of abbreviations:fingers-crossed:
Click to expand...
Click to collapse
AT&T is a carrier in the US. If you didn't know what it meant, then you shouldn't have posted here.
If you don't know an abbreviation, than look it up. There are a variety of threads that already explain what you are asking about, or just Google for it. Here is one: http://forum.xda-developers.com/showthread.php?p=52484527
It doesn't tell you what AT&T is, but it explains a great many other common acronyms and terms.
AT&T is a mobile carrier...
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
Not an android term...just a mobile carrier network
where would i find the firmware for 4.4.4.? I tried downloading the android revolution custom rom 22.1 but i couldnt get any wifi after flashing.
didnt realize i had to update firmware(however when i received phone i was on 4.4.2 and i tried doing software update and was told up to date)
i was told go back to stock and take stock update but i never received one in the first place.
is there a way that i can flash 4.4.4. firmware now that im bootloader unlocked/rooted and s-off?
would i flash zip firmware then reflash android 22.1 or the other way around?
sorry for the noob questions but after searching for awhile i can say im honestly stuck without having to go back to 100 percent stock and hope i get an ota update
there is no att 4.4.4,if on an ATT variant,change your cid to BS_US001 and flash the 3.28.1540.5 ruu if you really want 4.4.4
nogaros4v8 said:
where would i find the firmware for 4.4.4.? I tried downloading the android revolution custom rom 22.1 but i couldnt get any wifi after flashing.
didnt realize i had to update firmware(however when i received phone i was on 4.4.2 and i tried doing software update and was told up to date)
i was told go back to stock and take stock update but i never received one in the first place.
is there a way that i can flash 4.4.4. firmware now that im bootloader unlocked/rooted and s-off?
would i flash zip firmware then reflash android 22.1 or the other way around?
sorry for the noob questions but after searching for awhile i can say im honestly stuck without having to go back to 100 percent stock and hope i get an ota update
Click to expand...
Click to collapse
nogaros4v8 said:
where would i find the firmware for 4.4.4.? I tried downloading the android revolution custom rom 22.1 but i couldnt get any wifi after flashing.
didnt realize i had to update firmware(however when i received phone i was on 4.4.2 and i tried doing software update and was told up to date)
i was told go back to stock and take stock update but i never received one in the first place.
is there a way that i can flash 4.4.4. firmware now that im bootloader unlocked/rooted and s-off?
would i flash zip firmware then reflash android 22.1 or the other way around?
Click to expand...
Click to collapse
This is discussed in a great many places. Euro firmware and instructions here: http://forum.xda-developers.com/showthread.php?t=2696282
US Dev Edition firmware here (included with WNC's ROM): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Assume you are on AT&T, since this forum section is specific to the AT&T version. Note that Euro ROMs may create some network issues on AT&T (most prominent of which is LTE issues with Google services). The best combo for AT&T is WNC's ROM and the matching firmware.
Wonders_Never_Cease said:
there is no att 4.4.4,if on an ATT variant,change your cid to BS_US001 and flash the 3.28.1540.5 ruu if you really want 4.4.4
Click to expand...
Click to collapse
i guess thats where the confusion lies. Its not that i want 4.4.4. i thought i needed 4.4.4. to run the custom rom.
---------- Post added at 04:07 PM ---------- Previous post was at 04:02 PM ----------
redpoint73 said:
This is discussed in a great many places. Euro firmware and instructions here: http://forum.xda-developers.com/showthread.php?t=2696282
US Dev Edition firmware here (included with WNC's ROM): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Assume you are on AT&T, since this forum section is specific to the AT&T version. Note that Euro ROMs may create some network issues on AT&T (most prominent of which is LTE issues with Google services). The best combo for AT&T is WNC's ROM and the matching firmware.
Click to expand...
Click to collapse
correct i followed those instructions and downloaded the latest firmware from that link and i still couldnt get wifi to work on the revolution 22.1 rom. i then followed the directions went s-off to try and find a firmware for me to run the rom and couldnt get anything to work.
Yes i am on att. currently 4.4.2 rooted with s-off running twrp as my customer recovery.
nogaros4v8 said:
correct i followed those instructions and downloaded the latest firmware from that link and i still couldnt get wifi to work on the revolution 22.1 rom. i then followed the directions went s-off to try and find a firmware for me to run the rom and couldnt get anything to work.
Click to expand...
Click to collapse
What did you try to flash ("couldn't get anything to work" doesn't' tell us a thing)? And what was the result?
redpoint73 said:
What did you try to flash ("couldn't get anything to work" doesn't' tell us a thing)? And what was the result?
Click to expand...
Click to collapse
your right i should be more specific. i went under the firmware section for the revolution rom and downloaded the firmware (3.32.531.2.zip). Now learning that this is euro rom and not att specific rom i guess the firmware i installed had nothing to do with att. the result didnt change. it was as if i flashed the rom without the firmware again. everything worked fine just no wifi. Before doing any of that i did a backup with twrp with just stock settings. right now im rooted and s-off. Looking into the rom you suggested and reading before i do anything. Its quite confusing this go around for me not too sure why.
appreciate everyones help though ! :good:
Backup your files [email protected] pics music etc,change cid and run the 3.28.1540.5 ruu,this is the same device(att variant) as us developer edition,will put you to latest compatable firmware and enable you to run any 4.4.4 builds out.
nogaros4v8 said:
your right i should be more specific. i went under the firmware section for the revolution rom and downloaded the firmware (3.32.531.2.zip). Now learning that this is euro rom and not att specific rom i guess the firmware i installed had nothing to do with att. the result didnt change. it was as if i flashed the rom without the firmware again. everything worked fine just no wifi. Before doing any of that i did a backup with twrp with just stock settings. right now im rooted and s-off. Looking into the rom you suggested and reading before i do anything. Its quite confusing this go around for me not too sure why.
appreciate everyones help though ! :good:
Click to expand...
Click to collapse
nogaros4v8 said:
your right i should be more specific. i went under the firmware section for the revolution rom and downloaded the firmware (3.32.531.2.zip). Now learning that this is euro rom and not att specific rom i guess the firmware i installed had nothing to do with att. the result didnt change. it was as if i flashed the rom without the firmware again. everything worked fine just no wifi. Before doing any of that i did a backup with twrp with just stock settings. right now im rooted and s-off. Looking into the rom you suggested and reading before i do anything. Its quite confusing this go around for me not too sure why.
Click to expand...
Click to collapse
Did you flash the firmware with fastboot, following the instructions from the first link I supplied?
I think you are doing something wrong, which is probably why WNC is suggesting the RUU (which is a executable, and pretty much self-running).
Wonders_Never_Cease said:
Backup your files [email protected] pics music etc,change cid and run the 3.28.1540.5 ruu,this is the same device(att variant) as us developer edition,will put you to latest compatable firmware and enable you to run any 4.4.4 builds out.
Click to expand...
Click to collapse
just realized you wrote the rom that was suggested lol. I think im going to go that route instead. Not sure how to change a CID but i will def read up on it. i noticed your rom says it doesnt need to be changed however. thanks for the support
---------- Post added at 05:07 PM ---------- Previous post was at 04:59 PM ----------
redpoint73 said:
Did you flash the firmware with fastboot, following the instructions from the first link I supplied?
I think you are doing something wrong, which is probably why WNC is suggesting the RUU (which is a executable, and pretty much self-running).
Click to expand...
Click to collapse
yes i flashed the firmware with fastboot. i read both those posts before attempting even watched a few vids to make sure i did everything correct. However i think i am just going to go with WNC rom. i honestly had no idea there were euro roms and att specific roms. I figured everything in the att section was att specific. live and learn
nogaros4v8 said:
yes i flashed the firmware with fastboot. i read both those posts before attempting even watched a few vids to make sure i did everything correct. However i think i am just going to go with WNC rom. i honestly had no idea there were euro roms and att specific roms. I figured everything in the att section was att specific. live and learn
Click to expand...
Click to collapse
What is your current hboot and radio numbers (both are displayed in bootloader).
Also, you often have to flash the firmware zip twice in order for all the modules to install.
Connect phone to computer with fastboot in power settings turned off, open a command prompt navigate to your adb/fastboot location and run adb reboot bootloader,once phone reboots it will connect to fastbootusb ,once this is established run this command fastboot oem writecid BS_US001then run fastboot reboot-bootloader,once this is done can run the ruu from fastboot connection.
nogaros4v8 said:
just realized you wrote the rom that was suggested lol. I think im going to go that route instead. Not sure how to change a CID but i will def read up on it. i noticed your rom says it doesnt need to be changed however. thanks for the support
---------- Post added at 05:07 PM ---------- Previous post was at 04:59 PM ----------
yes i flashed the firmware with fastboot. i read both those posts before attempting even watched a few vids to make sure i did everything correct. However i think i am just going to go with WNC rom. i honestly had no idea there were euro roms and att specific roms. I figured everything in the att section was att specific. live and learn
Click to expand...
Click to collapse
redpoint73 said:
What is your current hboot and radio numbers (both are displayed in bootloader).
Also, you often have to flash the firmware zip twice in order for all the modules to install.
Click to expand...
Click to collapse
hboot- 3.19.0.000
radio 1.22.21331147a1.296
yea i read that it will fail sometimes the first time and to just run the process again.
nogaros4v8 said:
hboot- 3.19.0.000
radio 1.22.21331147a1.296
yea i read that it will fail sometimes the first time and to just run the process again.
Click to expand...
Click to collapse
The hboot and radio numbers indicate you are on the latest firmware. If you did in fact flash the firmware twice, I would be confidant the firmware is all properly installed. I would try either:
1) Flash the desired ROM again after wiping data, cache and Dalvik
2) RUU as WNC suggests
3) Try WNC's ROM with corresponding firmware
Hi everyone i have a HTC m8 0p6b120 with WiFi problem, I can't turn on WiFi and Bluetooth
I buy that with that problem the seller say it's was firmware problem but I don't know.
I just s-off yesterday but I don't know what way can I follow for solve this problem can anyone help me please?
Broken WiFI (grayed out) is a common symptom of firmware that is mismatched from the ROM. Either a stock ROM or custom ROM was flashed to the device that does not match the firmware (Hboot, radio, and other modules like media, WiFi, etc.).
This also means the phone was almost certainly modded by the previous user. So hopefully they described it as such when it was sold to you. Otherwise it was dishonest and fraudulent (or at least negligent).
What hboot number show in bootloader, and what software number is shown in Settings?
Hboot 3.19
1.58.502.1
Michrlz said:
Hboot 3.19
1.58.502.1
Click to expand...
Click to collapse
Former user didn't know what they were doing and flashed a really old stock ROM that does not correspond to the firmware. 1.58 ROM goes with hboot 3.16.
What is the radio baseband number (also in Settings)?
Do you have a preference on what Android build you want to be on? Or whether stock or custom ROM?
Baseband versión
[email protected]_40.34.C35006.02_F
I wanna have lollipop firmware but I want to repair the WiFi first
Michrlz said:
Baseband versión
[email protected]_40.34.C35006.02_F
I wanna have lollipop firmware but I want to repair the WiFi first
Click to expand...
Click to collapse
Looks like you are on 4.4.4 firmware.
No need to "repair the WiFi" if you are just going to flash Lollipop firmware and a Lollipop ROM. Once you have matching firmware and ROM, WiFi will work again.
To confirm, you will be using this phone on AT&T's network?
In on 4.4.2 can u gimme links of lollipop and firmware for mid 0p6b120 My phone is unlocked in using that for other network
Michrlz said:
In on 4.4.2 can u gimme links of lollipop and firmware for mid 0p6b120 My phone is unlocked in using that for other network
Click to expand...
Click to collapse
What "other network"? What region and carrier?
For future reference, when asking for help please supply as much detail as possible. Being vague is not allow us to help you very easily.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
Michrlz said:
In on 4.4.2
Click to expand...
Click to collapse
Your OS (otherwise known as ROM, software, or "main version") is 4.4.2.
Your hboot and radio number indicate 4.4.4 firmware (firmware contains hboot, radio, WiFi, media modules, and others) and not to be confused with the OS/ROM.
Its the mismatch of 4.4.4 firmware and 4.4.2. ROM that is causing your WiFi issue.
I'm using that in Colombia in Togo network Ok thanks what firmware can I use I wanna lollipop can u gimme link ? Can I convert it on another mid and update it to 5.0.1?
Michrlz said:
I'm using that in Colombia in Togo network Ok thanks what firmware can I use I wanna lollipop can u gimme link ? Can I convert it on another mid and update it to 5.0.1?
Click to expand...
Click to collapse
Various ways you can do this. But my suggestion would be to change to US Developers's Edition CID (or SuperCID) than run the 3.28 Developers's Edition RUU. No need to change MID, as US Dev Ed the same MID as the AT&T version.
This will put you on a stock 5.0 ROM, with no AT&T bloatware, AT&T specific features, or disabled features. It will also mean you are "fully converted" to the Dev Edition, and will even get future Dev Edition OTA updates.
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
Then my solution is run that Ruu
http://dl3.htc.com/application/RUU_..._2G_20.63.4196.01_release_394319_signed_2.exe
And my problem will solve?
Do I need convert to sense first?
Thanks for all
Michrlz said:
Then my solution is run that Ruu
http://dl3.htc.com/application/RUU_..._2G_20.63.4196.01_release_394319_signed_2.exe
And my problem will solve?
Do I need convert to sense first?
Thanks for all
Click to expand...
Click to collapse
Yes, that is what you want. Change to SuperCID, and run the RUU, and it will be on stock Lollipop ROM with Lollipop firmware.
No need to convert to Sense if you are already on Sense. Converting to Sense is only needed if you did a full conversion to GPE.
redpoint73 said:
Yes, that is what you want. Change to SuperCID, and run the RUU, and it will be on stock Lollipop ROM with Lollipop firmware.
No need to convert to Sense if you are already on Sense. Converting to Sense is only needed if you did a full conversion to GPE.
Click to expand...
Click to collapse
No muy htc is reboting automatic and still without WiFi can i use another ROM or is hardware problem?
Michrlz said:
No muy htc is reboting automatic and still without WiFi can i use another ROM or is hardware problem?
Click to expand...
Click to collapse
Its not clear if you have tried to do what I've suggested (repeatedly now). And if so, did some step fail, or was it successful in updating you to Dev Edition Lollipop?
redpoint73 said:
Its not clear if you have tried to do what I've suggested (repeatedly now). And if so, did some step fail, or was it successful in updating you to Dev Edition Lollipop?
Click to expand...
Click to collapse
it was successful i just change it to super cid and updrage it by ruu .exe i use two ruu and same problem is rebooting automatic what i can do? thanks for all
Michrlz said:
it was successful i just change it to super cid and updrage it by ruu .exe i use two ruu and same problem is rebooting automatic what i can do? thanks for all
Click to expand...
Click to collapse
Strange. No reboot issues before you did RUU?
no, i dont had reboot issues before
and i install 1.58 rom and working without wifi
any working solution i will sell this phone
Michrlz said:
any working solution i will sell this phone
Click to expand...
Click to collapse
All I can think, is to try the AT&T 4.4.4 RUU, or even an older AT&T RUU (4.4.3 or 4.4.2).
If you are still getting random reboots, than I don't think there is much else you can do. RUU will usually solve any software issue, as its a complete factory software image.
I've been having the same issue with the Wi-Fi being greyed out. I think it's my fault, though. I got my One M8 yesterday and wanted to update to Lollipop. I might've done something wrong, and now I cannot use Wi-Fi.
Anyways, my HBOOT is 3.16.0.0000 and my RADIO is 1.16.21331831.A16G.
Should I follow the same steps mentioned above or...? I'm really new to this and I shouldn't have tried it out without researching first.
EDIT: I forgot to mention that I'm S-ON. Don't know if that helps.
i wanna get an s-off with sunshine and install arhd rom after but my firmware isnt up to date so i was told to get a stock rom and update there.
Any suggestions on where i start and how to do it please?
Thanks
dimakiller3 said:
i wanna get an s-off with sunshine and install arhd rom after but my firmware isnt up to date so i was told to get a stock rom and update there.
Any suggestions on where i start and how to do it please?
Thanks
Click to expand...
Click to collapse
I can't make sense of your post so I can't help you. Maybe you could reword what your trying to do because firmware has nothing to do with a stock ROM.
basically i installed a new custom rom ARHD and my wifi doesnt work there. After searching on the web apparently it's a firmware problem. I was told that if i install a stock rom and update the firmware there and reinstall the ARHD again my wifi will work.
dimakiller3 said:
basically i installed a new custom rom ARHD and my wifi doesnt work there. After searching on the web apparently it's a firmware problem. I was told that if i install a stock rom and update the firmware there and reinstall the ARHD again my wifi will work.
Click to expand...
Click to collapse
OK so you need the latest firmware are you S-Off? If so You need to download your device latest firmware an fastboot it. I would try that before I reflashed ROM..if you still don't have WiFi then I would a restore a stock backup you should have made or go to the development section an find an flash a stock rom
dimakiller3 said:
basically i installed a new custom rom ARHD and my wifi doesnt work there. After searching on the web apparently it's a firmware problem. I was told that if i install a stock rom and update the firmware there and reinstall the ARHD again my wifi will work.
Click to expand...
Click to collapse
No, for the AT&T version that actually will not work. OTA will only update you to 4.4.4, and current ARHD is 5.0 (assume current Lollipop based ARHD is what you want).
Further, if you update to 4.4.4 OTA, this will break sunshine, and you won't be able to get s-off. So you will be essentially stuck on 4.4.4 firmware until AT&T releases Lollipop.
If you want to run Lollipop now (and any current ROM based on it, like ARHD) my advice is to s-off now. Then update to LP firmware manually.
redpoint73 said:
No, for the AT&T version that actually will not work. OTA will only update you to 4.4.4, and current ARHD is 5.0 (assume current Lollipop based ARHD is what you want).
Further, if you update to 4.4.4 OTA, this will break sunshine, and you won't be able to get s-off. So you will be essentially stuck on 4.4.4 firmware until AT&T releases Lollipop.
If you want to run Lollipop now (and any current ROM based on it, like ARHD) my advice is to s-off now. Then update to LP firmware manually.
Click to expand...
Click to collapse
I have 4.4.4 and don't know the firmware number (because of the known bug in a previous version of TWRP).
You've probably described why I can't get S-Off with Sunshine to flash the latest AT&T rom so I can know my firmware number.
I need to know it so I can flash stock backup & recovery and then viper.
Any recommendations? My thanks in advance!
Wombat Pete said:
I have 4.4.4 and don't know the firmware number (because of the known bug in a previous version of TWRP).
Click to expand...
Click to collapse
Look at your hboot number in bootloader.
3.16 = 1.x software (Android 4.4.2)
3.17 = 2.x (4.4.3)
3.19 = 3.x (4.4.4)
Lollipop (Android 5.0) also uses hboot 3.19. But as already mentioned, AT&T hasn't released an offiicial LP update yet. So this can't be the case for you.
Wombat Pete said:
You've probably described why I can't get S-Off with Sunshine to flash the latest AT&T rom so I can know my firmware number.
Click to expand...
Click to collapse
If you are hboot 3.19, sunshine won't work. Any earlier hboot, and it should work. If you updated to 4.4.4 by official means (OTA or RUU) then you have hboot 3.19, and sunshine won't work.
Wombat Pete said:
I need to know it so I can flash stock backup & recovery and then viper.
Click to expand...
Click to collapse
I don't understand what you hope to accomplish by flashing stock back and recovery. Neither will affect your firmware.
If you want to run any Lollipop based ROM (including current Viper) you need to update firmware, and on the AT&T device that means you need s-off. At least until AT&T releases LP officially.
So no, what you suggested won't work.
redpoint73 said:
I don't understand what you hope to accomplish by flashing stock back and recovery. Neither will affect your firmware.
If you want to run any Lollipop based ROM (including current Viper) you need to update firmware, and on the AT&T device that means you need s-off. At least until AT&T releases LP officially.
So no, what you suggested won't work.
Click to expand...
Click to collapse
What I'm trying to do is simply what is described on this page: http://venomroms.com/viperonem8_3-0-0-requirements/
Am I misunderstanding it? I also felt there's something odd there - or, at least, I don't understand WHY flashing the stock back-up and recovery would be necessary to flash Viper. But isn't that what it says?
I would LOVE to understand the process - what's described in that process - better!
Any guidance will be greatly appreciated.
Wombat Pete said:
What I'm trying to do is simply what is described on this page: http://venomroms.com/viperonem8_3-0-0-requirements/
Am I misunderstanding it? I also felt there's something odd there - or, at least, I don't understand WHY flashing the stock back-up and recovery would be necessary to flash Viper. But isn't that what it says?
Click to expand...
Click to collapse
You're missing a key step(s): its restore stock ROM and stock recovery for the purpose of then updating via OTA. Reason for this, is that the OTA will update your firmware (for most carriers, that means updating firmware to Lollipop).
This won't work for you (having the AT&T version), since you appear to already be on the most current AT&T OTA (4.4.4). That means you are on KitKat firmware, but need Lollipop firmware to run any LP based Sense ROMs.
Also note that the page you linked is outdated, as it refers to 4.4.4, since that was what ViperOne was based on at the time (but its been updated to LP for a while now).
I have just read that sunshine has been updated to work on 4.4.4. I think this has literally happened just on the last day or so. So your options are to sunshine s-off and update your firmware. Or else wait for AT&T to release LP, and update by official OTA or RUU.
redpoint73 said:
You're missing a key step(s): its restore stock ROM and stock recovery for the purpose of then updating via OTA. Reason for this, is that the OTA will update your firmware (for most carriers, that means updating firmware to Lollipop).
This won't work for you (having the AT&T version), since you appear to already be on the most current AT&T OTA (4.4.4). That means you are on KitKat firmware, but need Lollipop firmware to run any LP based Sense ROMs.
Also note that the page you linked is outdated, as it refers to 4.4.4, since that was what ViperOne was based on at the time (but its been updated to LP for a while now).
I have just read that sunshine has been updated to work on 4.4.4. I think this has literally happened just on the last day or so. So your options are to sunshine s-off and update your firmware. Or else wait for AT&T to release LP, and update by official OTA or RUU.
Click to expand...
Click to collapse
Redpoint, thanks! As posted on the other site, the new Sunshine option worked perfectly - I now have S-Off. Very, very cool.
So I'm on to your option one - update firmware so I can get viper on the device. Is there a recommended firmware update? How would I find this myself the next time?
Wombat Pete said:
So I'm on to your option one - update firmware so I can get viper on the device. Is there a recommended firmware update? How would I find this myself the next time?
Click to expand...
Click to collapse
The "right" firmware is a tricky question. I'd start with the 4.16.1540 firmware posted along with the ROM here: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
This is US Dev Edition firmware, which is specifically intended for AT&T's network.
Now whether it plays well with Viper or ARHD, is another question. Or whether those ROMs play well on AT&T's network is also another complicated question. AT&T does some annoyingly unique things to their network, that doesn't always play well with the "international" based ROMs. In particular, AT&T's LTE seems to be playing havoc on some "international" ROMs; possibly due to AT&T beginning implementation of HD Voice (Voice over LTE or VoLTE).
Trial and error is the best you can do. Start with the 1540 firmware I suggested, and your desired ROM, and see how it goes. But WiFi will be fixed, I can tell you that.
Also, the ROM included on the link I provided is intended specifically for use on AT&T (one of the few current ROMs that is). So if you want a LP ROM that will work seamlessly on AT&T's network, flash WNC's ROM and the 1540 firmware.
redpoint73 said:
The "right" firmware is a tricky question. I'd start with the 4.16.1540 firmware posted along with the ROM here: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
This is US Dev Edition firmware, which is specifically intended for AT&T's network.
Now whether it plays well with Viper or ARHD, is another question. Or whether those ROMs play well on AT&T's network is also another complicated question. AT&T does some annoyingly unique things to their network, that doesn't always play well with the "international" based ROMs. In particular, AT&T's LTE seems to be playing havoc on some "international" ROMs; possibly due to AT&T beginning implementation of HD Voice (Voice over LTE or VoLTE).
Trial and error is the best you can do. Start with the 1540 firmware I suggested, and your desired ROM, and see how it goes. But WiFi will be fixed, I can tell you that.
Also, the ROM included on the link I provided is intended specifically for use on AT&T (one of the few current ROMs that is). So if you want a LP ROM that will work seamlessly on AT&T's network, flash WNC's ROM and the 1540 firmware.
Click to expand...
Click to collapse
Perfect, that's all helpful and good to know.
For full disclosure: I'm on T-Mobile; it's the same network, I believe, so that probably doesn't change anything, but I mention it just in case.
So the process I'm planning to do it:
1.) Flash the ATT_4_16_1540_8_M8_Lollipop_Firmware and ROM
http://goo.gl/iumj9r
2.) Flash the latest Viper ROM.
3.) If it gives me trouble, flash firmware & from 1., above, to go back to that.
Does that sound right?
Also, do people restore s-on when they have their desired setup, or just leave the phone S-off?
Wombat Pete said:
For full disclosure: I'm on T-Mobile; it's the same network, I believe, so that probably doesn't change anything, but I mention it just in case.
Click to expand...
Click to collapse
T-Mobile and AT&T are not even remotely the same network. I know for a fact, the 1540 firmware I previously suggested (thinking you were on AT&T) does not include the AWS band that T-Mobile most commonly uses for 3G. And T-Mobile uses some different bands for LTE than AT&T.
T-Mobile has deployed 1900 MHz 3G band in select markets, in hopes of luring AT&T users (without having to swap devices). But only in certain cities.
Its best you flash T-Mobile firmware, for use on T-Mobile's network.
Wombat Pete said:
Also, do people restore s-on when they have their desired setup, or just leave the phone S-off?
Click to expand...
Click to collapse
Typically, no. In fact, if you ever want to s-off again, I believe you have to pay the $25 for sunshine again.
For the most part, there is no real downside to staying s-off, in my opinion. Just be careful that you only flash anything meant specifically for the M8 (and the GSM version, at that, nothing for the CDMA). As s-off means many checks are bypassed, and you can accidentally flash something meant for another device that bricks the phone, if you are careless. But always be careful about what you flash, and staying s-off is fine.
redpoint73 said:
T-Mobile and AT&T are not even remotely the same network. I know for a fact, the 1540 firmware I previously suggested (thinking you were on AT&T) does not include the AWS band that T-Mobile most commonly uses for 3G. And T-Mobile uses some different bands for LTE than AT&T.
T-Mobile has deployed 1900 MHz 3G band in select markets, in hopes of luring AT&T users (without having to swap devices). But only in certain cities.
Its best you flash T-Mobile firmware, for use on T-Mobile's network.
Typically, no. In fact, if you ever want to s-off again, I believe you have to pay the $25 for sunshine again.
For the most part, there is no real downside to staying s-off, in my opinion. Just be careful that you only flash anything meant specifically for the M8 (and the GSM version, at that, nothing for the CDMA). As s-off means many checks are bypassed, and you can accidentally flash something meant for another device that bricks the phone, if you are careless. But always be careful about what you flash, and staying s-off is fine.
Click to expand...
Click to collapse
Understood. Is there a similar link to recommended firmware for T-Mobile?
And then the main thing - is the process I suggest right? 1.) Flash new LP firmware; 2.) Flash the latest viper ROM; 3.) If I have trouble with viper that I can't solve, flash a ROM made for T-Mobile. Does that sound right? If so, i just need to determine the best firmware choice... and what are criteria might I use for that?
Wombat Pete said:
Understood. Is there a similar link to recommended firmware for T-Mobile?
Click to expand...
Click to collapse
I can't actually find the Lollipop T-Mobile US firmware at first glance. The firmware collection is below (with instructions how to flash). But if you go to the firmware collection link (531 folder under HTC M8 is for T-Mobile) it only has 3.x firmware (Android 4.4.4):
http://forum.xda-developers.com/showthread.php?t=2696282
I'll look some more, but you can search as well.
Now, if I understand you have the AT&T version (please confirm)? If so, flashing T-Mobile firmware (once we find it) is a little more complicated than flashing AT&T firmware on an AT&T device. You will need to change your CID and MID to T-Mobile's, in order to flash the T-Mobile firmware.
The following guide shows how to change the CID and MID. But you will need to find the T-Mobile US CID. I don't know if off hand (or where to find it quickly), so you might do your own research on that one. Keeping in mind that T-Mobile is also a carrier in Europe, so make sure is the T-Mobile US CID.
http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
Wombat Pete said:
And then the main thing - is the process I suggest right? 1.) Flash new LP firmware; 2.) Flash the latest viper ROM; 3.) If I have trouble with viper that I can't solve, flash a ROM made for T-Mobile. Does that sound right? If so, i just need to determine the best firmware choice... and what are criteria might I use for that?
Click to expand...
Click to collapse
I don't think T-Mobile is nearly as troublesome as AT&T (although you might check the T-Mobile M8 forum section on that, or the Viper thread). I have a feeling that once you are on the T-Mobile firmware, and flash Viper, you will be fine.
redpoint73 said:
I can't actually find the Lollipop T-Mobile US firmware at first glance. The firmware collection is below (with instructions how to flash). But if you go to the firmware collection link (531 folder under HTC M8 is for T-Mobile) it only has 3.x firmware (Android 4.4.4):
http://forum.xda-developers.com/showthread.php?t=2696282
I'll look some more, but you can search as well.
Now, if I understand you have the AT&T version (please confirm)? If so, flashing T-Mobile firmware (once we find it) is a little more complicated than flashing AT&T firmware on an AT&T device. You will need to change your CID and MID to T-Mobile's, in order to flash the T-Mobile firmware.
The following guide shows how to change the CID and MID. But you will need to find the T-Mobile US CID. I don't know if off hand (or where to find it quickly), so you might do your own research on that one. Keeping in mind that T-Mobile is also a carrier in Europe, so make sure is the T-Mobile US CID.
http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
I don't think T-Mobile is nearly as troublesome as AT&T (although you might check the T-Mobile M8 forum section on that, or the Viper thread). I have a feeling that once you are on the T-Mobile firmware, and flash Viper, you will be fine.
Click to expand...
Click to collapse
Confirming: I am using T-Mobile as the carrier, but the device was made for AT&T.
Is this what we're looking for? http://www.htc.com/us/support/htc-one-m8-t-mobile/news/
And, if so... as I'm S-off, I don't need to go through the stock ROM/stock recovery steps, and there's also no need to re-lock, RIGHT? I'd like to be as sure as possible that I'm doing the right steps in the right order.
Wombat Pete said:
Is this what we're looking for? http://www.htc.com/us/support/htc-one-m8-t-mobile/news/
And, if so... as I'm S-off, I don't need to go through the stock ROM/stock recovery steps, and there's also no need to re-lock, RIGHT? I'd like to be as sure as possible that I'm doing the right steps in the right order.
Click to expand...
Click to collapse
You are correct. RUU will give you a complete stock T-Mobile image, not just the firmware you want, but also stock T-Mobile Lollipop ROM, stock recovery, etc. Its a bit of a nuclear option, if the main intent is to just update firmware and install Viper. But it will get the job done.
Also correct that there is no need to relock bootloader to RUU, since you are s-off. But you need to change to T-Mobile CID and MID to run the RUU.
What you will have after changing CID/MID and running the T-Mobile RUU is essentially a T-Mobile M8, in everything except the stupid AT&T logo on back of the phone!
If you want to install a custom ROM after that, just flash TWRP back onto the phone, and flash the desired ROM.
redpoint73 said:
You are correct. RUU will give you a complete stock T-Mobile image, not just the firmware you want, but also stock T-Mobile Lollipop ROM, stock recovery, etc. Its a bit of a nuclear option, if the main intent is to just update firmware and install Viper. But it will get the job done.
Also correct that there is no need to relock bootloader to RUU, since you are s-off. But you need to change to T-Mobile CID and MID to run the RUU.
What you will have after changing CID/MID and running the T-Mobile RUU is essentially a T-Mobile M8, in everything except the stupid AT&T logo on back of the phone!
If you want to install a custom ROM after that, just flash TWRP back onto the phone, and flash the desired ROM.
Click to expand...
Click to collapse
OK... so I think this makes sense. Is this the process, then?
1.) I change to T-Mobile CID and MID
2.) Then... to run the RUU, do I need to be in fastboot? Just have the phone plugged in? Run it from the fastboot directory? Put it in the phone memory?
I'd be running THIS, I gather: RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2.exe
Wait... that can't be right, given that the name includes "ATT" and "Cingular". I suppose they mean I have to find it myself... here? http://www.htc.com/us/support/htc-one-t-mobile/news/ Yes, the download at the end of this page, right? And it won't brick the phone so long as I'm S-off...
...does that seem right?
3.) Then I flash VIPER over that. If I have any problems with VIPER, I should be able to run this RUU again? Is that the best approach, do you think?
---------- Post added at 12:36 AM ---------- Previous post was at 12:24 AM ----------
Two additional things:
First, HTC (not surprisingly) refuses to say whether the RUU will work, even with S-off.
Second, a note from the chat, which I post for common interest here:
ME: T-Mobile and AT&T are the same, physically, right? Only SOFTWARE differences, right? Not hardware differences, right?
HTC Agent: Almost everything is the same. But the frequencies of the antenna are different.Don't know whether this affects our process here, but thought it might be interesting.
Also, after the RUU I'd be S-Off, but locked? Unlock again? Not that that should be difficult...
Wombat Pete said:
OK... so I think this makes sense. Is this the process, then?
1.) I change to T-Mobile CID and MID
2.) Then... to run the RUU, do I need to be in fastboot? Just have the phone plugged in? Run it from the fastboot directory? Put it in the phone memory?
I'd be running THIS, I gather: RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2.exe
Wait... that can't be right, given that the name includes "ATT" and "Cingular". I suppose they mean I have to find it myself... here? http://www.htc.com/us/support/htc-one-t-mobile/news/ Yes, the download at the end of this page, right? And it won't brick the phone so long as I'm S-off...
...does that seem right?
3.) Then I flash VIPER over that. If I have any problems with VIPER, I should be able to run this RUU again? Is that the best approach, do you think?
Click to expand...
Click to collapse
1) Correct
2) Normally, you just have the phone booted; and the RUU will reboot the phone to fastboot automatically. There are a few instances where some folk have to put the phone into fastboot mode manually. But it will normally work the way the instructions tell you.
Run the RUU executable from your PC. It doesn't matter where the file is located.
Use the RUU linked at the bottom of the HTC support page for the T-Mobile version.
3) After RUU, you will need to flash TWRP again; as RUU write stock recovery over whatever was there before (TWRP in your case). After flashing TWRP, then you can flash Viper.
Yes, if Viper give you trouble you can always use the RUU again.
Wombat Pete said:
Two additional things:
First, HTC (not surprisingly) refuses to say whether the RUU will work, even with S-off.
Click to expand...
Click to collapse
They won't say that the T-Mobile RUU will run on the AT&T version, if that is what you asked them. HTC doesn't want you "converting" the device from one carrier version to another; since it contrary to what the carriers want.
Similarly, they won't want to acknowledge s-off since they don't like the mod community hacking/exploiting s-off in the first place.
Wombat Pete said:
Second, a note from the chat, which I post for common interest here:
ME: T-Mobile and AT&T are the same, physically, right? Only SOFTWARE differences, right? Not hardware differences, right?
HTC Agent: Almost everything is the same. But the frequencies of the antenna are different.Don't know whether this affects our process here, but thought it might be interesting.
Click to expand...
Click to collapse
I think that agent is simply wrong here. Snapdragon 801, band support is software based, for all but CDMA bands (which require different hardware).
If you search the forums, I'm pretty certain there are other users on these forums that have done exactly what you are proposing: converting the AT&T version to T-Mobile. I may have even helped one or 2 users do it.
hi....
i have htc one m8 att and its in 4.4.2 and there is no update... i bought this from some guy in asia and its working with all carrier.... its not s_off or bootloa
der unlock.... what i can do now....?
i hope someone can help me
hosein.metro said:
hi....
i have htc one m8 att and its in 4.4.2 and there is no update... i bought this from some guy in asia and its working with all carrier.... its not s_off or bootloa
der unlock.... what i can do now....?
i hope someone can help me
Click to expand...
Click to collapse
Can't be certain from your post, but it sounds like you are not on AT&T's network, and possibly not even in the US.
You need to be on AT&T's network to get OTA update for the AT&T M8. This isn't true for most other versions of the M8, AT&T is fairly unique in this regard.
You can download the RUU to a PC, and update with your phone connected: http://dl3.htc.com/application/RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2.exe
Bear in mind, that updating to Android 4.4.4 will break sunshine s-off. You will not be able to s-off unless sunshine is updated to include a new exploit. So if you want s-off, its highly recommended to use sunshine (the only method at this time) before updating to 4.4.4.
tnx to reply.... if i convert to gpe can i get google update?
and i have noob qouestion...
if i update freamware will my phone sim lock?
i scare to updare freamware and my phone will not woking with other carrier...
sory for bad english [emoji12]
hosein.metro said:
tnx to reply.... if i convert to gpe can i get google update?
Click to expand...
Click to collapse
Yes you will. But you need to s-off and change CID/MID in order to do a "full conversion" (stock firmware, stock ROM, stock recovery, etc.).
hosein.metro said:
if i update freamware will my phone sim lock?
i scare to updare freamware and my phone will not woking with other carrier...
Click to expand...
Click to collapse
No, updating firmware, ROM flashing, etc. will not SIM lock the phone. The only way that will happen is if you lock it yourself.
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
redpoint73 said:
Bear in mind, that updating to Android 4.4.4 will break sunshine s-off. You will not be able to s-off unless sunshine is updated to include a new exploit. So if you want s-off, its highly recommended to use sunshine (the only method at this time) before updating to 4.4.4.
Click to expand...
Click to collapse
Hold on, I'm just reading that sunshine now supports 4.4.4 and 5.0! This is a very recent change:
http://theroot.ninja/download.html
But if you decide you want s-off, anyway; I'd still recommend you do it while still on a lower hboot number (before updating) just to be safe.
ok tnx again.... i dont risk... and i s_off before update...
last question is... what is the best way to convert to gpe... there is many tutorial in internet... if give me a link... its better
i searching for best and safe way
hosein.metro said:
last question is... what is the best way to convert to gpe... there is many tutorial in internet... if give me a link... its better
i searching for best and safe way
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2708589
Heres what i have noticed on verizon htc 10 with us unlocked firmware.pacrom,validus,aokp and rr roms will not flash.cm and beanstalk do.just some info for those wondering what roms work and what roms dont.
UPDATE!!! The 9/4 build of RR boots.no home button and same bugs as other cm.switch to global mode let it connect signal reboot let it connect again then switch back to cdma/lte/evdo and it will reconect with lte and stay connected.at least it did for me.
gillim74 said:
Heres what i have noticed on verizon htc 10 with us unlocked firmware.pacrom,validus,aokp and rr roms will not flash.cm and beanstalk do.just some info for those wondering what roms work and what roms dont.
Click to expand...
Click to collapse
Thanks a lot for the info.
Did you do a full conversion with an RUU or just flashed the US unlocked firmware? If you RUUed, did you follow the same basic process as described in the debranding thread?
Tarima said:
Thanks a lot for the info.
Did you do a full conversion with an RUU or just flashed the US unlocked firmware? If you RUUed, did you follow the same basic process as described in the debranding thread?
Click to expand...
Click to collapse
Just flashed the us unlocked firmware.
gillim74 said:
Just flashed the us unlocked firmware.
Click to expand...
Click to collapse
Can you let me know which firmware file you flashed? Did it have boot and recovery removed? Anything else specific you can share on how you flashed?
I want to flash the unlocked firmware and given how little people have posted about that I don't want to bork my phone. Thanks.
Tarima said:
Can you let me know which firmware file you flashed? Did it have boot and recovery removed? Anything else specific you can share on how you flashed?
I want to flash the unlocked firmware and given how little people have posted about that I don't want to bork my phone. Thanks.
Click to expand...
Click to collapse
Its on the cm13 discussion page its not the cm thread in roms and kernels its the other cm thread in discussio s i believe.i out it on my sd card not internal storage but your removable sd card.rebooted into download and folled the instructions to flash basically you hit volume up.i would start at page 55 to look for the firmware
gillim74 said:
Its on the cm13 discussion page its not the cm thread in roms and kernels its the other cm thread in discussio s i believe.i out it on my sd card not internal storage but your removable sd card.rebooted into download and folled the instructions to flash basically you hit volume up.i would start at page 55 to look for the firmware
Click to expand...
Click to collapse
Thanks for the lead. I followed everything in that thread and couldn't get a ROM to boot with U.S Unlocked firmware (short of formatting data), but it did help me gain confidence about flashing the Unlocked RUU on my Verizon 10. Working great now.
Tarima said:
Thanks for the lead. I followed everything in that thread and couldn't get a ROM to boot with U.S Unlocked firmware (short of formatting data), but it did help me gain confidence about flashing the Unlocked RUU on my Verizon 10. Working great now.
Click to expand...
Click to collapse
So you used the unlocked firmware ruu and you can boot cm with no problems and have data working and everything?
gillim74 said:
So you used the unlocked firmware ruu and you can boot cm with no problems and have data working and everything?
Click to expand...
Click to collapse
No I wasn't interested in CM, just wanted to see how people managed to flash Unlocked firmware/radio on their VZW 10s. That thread is pretty much the only place I've seen anyone talk about that actively.
Running Unlocked everything now (full debrand), stock ROM and rooted.
Tarima said:
No I wasn't interested in CM, just wanted to see how people managed to flash Unlocked firmware/radio on their VZW 10s. That thread is pretty much the only place I've seen anyone talk about that actively.
Running Unlocked everything now (full debrand), stock ROM and rooted.
Click to expand...
Click to collapse
And everything works for verizon? Have you tried to flash a cm rom to see if it would work or could you and let me know if it does please.and what ruu a us unlocked one or international one?
gillim74 said:
And everything works for verizon? Have you tried to flash a cm rom to see if it would work or could you and let me know if it does please.and what ruu a us unlocked one or international one?
Click to expand...
Click to collapse
Here's the thing, I'm using the phone in Canada on a non-Verizon network. So for me, everything works on the phone but I wouldn't be able to tell you about Verizon network services like Volte/advanced calling/etc. I'm guessing those wouldn't work, but the phone it itself is running well.
The RUU I used is directly from HTC:
http://www.htc.com/us/support/htc-10/news/
Does installing CM require anything other than a simple flash?
Wondering if anyone has tried flashing the latest firmware onto a VZW HTC 10, and if so, what the results were. Thanks.
pettigrew95 said:
Wondering if anyone has tried flashing the latest firmware onto a VZW HTC 10, and if so, what the results were. Thanks.
Click to expand...
Click to collapse
Latest firmware from who? U.S. Unlocked? W.W.E?
If you didn't see my earlier post I'm running a full Unlocked conversion on my VZW 10.
gillim74 said:
Heres what i have noticed on verizon htc 10 with us unlocked firmware.pacrom,validus,aokp and rr roms will not flash.cm and beanstalk do.just some info for those wondering what roms work and what roms dont.
UPDATE!!! The 9/4 build of RR boots.no home button and same bugs as other cm.switch to global mode let it connect signal reboot let it connect again then switch back to cdma/lte/evdo and it will reconect with lte and stay connected.at least it did for me.
Click to expand...
Click to collapse
Did you modify the firmware.zip? or did you just flash the firmware?
US unlocked is getting an update right now I believe and will be interested in flashing the new firmware and ROM.
Appreciate you making a thread on this as many as very confused and have this question about can we flash the firmware from other carriers, etc.
Have you tried flashing the verizon firmware back and seeing if verizon ROM will now flash, as you said Validius doesn't flash on the US unlocked firmware.
Curious if an RUU will be needed to be flashed to get fully back to Verizon.
Tarima said:
Here's the thing, I'm using the phone in Canada on a non-Verizon network. So for me, everything works on the phone but I wouldn't be able to tell you about Verizon network services like Volte/advanced calling/etc. I'm guessing those wouldn't work, but the phone it itself is running well.
The RUU I used is directly from HTC:
http://www.htc.com/us/support/htc-10/news/
Does installing CM require anything other than a simple flash?
Click to expand...
Click to collapse
First post already explains about CM and if it works.
So you ran the full RUU and stayed on the stock RUU ROM?
andybones said:
Did you modify the firmware.zip? or did you just flash the firmware?
US unlocked is getting an update right now I believe and will be interested in flashing the new firmware and ROM.
Appreciate you making a thread on this as many as very confused and have this question about can we flash the firmware from other carriers, etc.
Have you tried flashing the verizon firmware back and seeing if verizon ROM will now flash, as you said Validius doesn't flash on the US unlocked firmware.
Curious if an RUU will be needed to be flashed to get fully back to Verizon.
First post already explains about CM and if it works.
So you ran the full RUU and stayed on the stock RUU ROM?
Click to expand...
Click to collapse
The firmware was already modified and i havent tried a verizon rom but when i get home i can and report back.if you get the new unlocked us firmware can you post a link here please?UPDATE!! Flashed your verizon firmware Mr.Bones with no issues at all.
andybones said:
Did you modify the firmware.zip? or did you just flash the firmware?
US unlocked is getting an update right now I believe and will be interested in flashing the new firmware and ROM.
Appreciate you making a thread on this as many as very confused and have this question about can we flash the firmware from other carriers, etc.
Have you tried flashing the verizon firmware back and seeing if verizon ROM will now flash, as you said Validius doesn't flash on the US unlocked firmware.
Curious if an RUU will be needed to be flashed to get fully back to Verizon.
First post already explains about CM and if it works.
So you ran the full RUU and stayed on the stock RUU ROM?
Click to expand...
Click to collapse
I changed my cid to 22222222 and ran the latest Unlocked RUU and stayed on stock.
As additional info, I previously tried to flash the same modified (recovery/radio removed, android-info.txt edited to add VZW cid) firmware zip as the OP but could not get the Verizon stock or any other ROM to boot. It was suggested that a full data formatting be necessary first, but I didn't try that and you probably know more about that process than me anyway. After each unsuccessful attempt however I was able to revert by flashing a VZW no-wipe RUU and restore my backed up VZW ROM without problems.
Tarima said:
Latest firmware from who? U.S. Unlocked? W.W.E?
If you didn't see my earlier post I'm running a full Unlocked conversion on my VZW 10.
Click to expand...
Click to collapse
I would guess whatever FW is the latest and greatest. I have a VZW 10...When you converted what was the process like? After converting you still get VZW full 4G LTE and advanced calling/video/WiFi calling? I'm running the VZW 1.82 FW right now but my ROM (LeeDroid) is based off of the 1.95 I believe. I'd like my FW to match the FW my ROM was based off of. Thanks!
gillim74 said:
The firmware was already modified and i havent tried a verizon rom but when i get home i can and report back.if you get the new unlocked us firmware can you post a link here please?
Click to expand...
Click to collapse
Do you mind posting the edited firmware, or is it posted and I'm blind?
I think the firmware will be found in the main threads before I am able to acquire it, but once ibdo get it I'll check in here.
I may have actually jumped the gun on much of any firmware changes, as I saw that there is an update coming in Santods ROM thread, so once the update comes we will see, hopefully if there's changes they are of use to us.
Tarima said:
I changed my cid to 22222222 and ran the latest Unlocked RUU and stayed on stock.
As additional info, I previously tried to flash the same modified (recovery/radio removed, android-info.txt edited to add VZW cid) firmware zip as the OP but could not get the Verizon stock or any other ROM to boot. It was suggested that a full data formatting be necessary first, but I didn't try that and you probably know more about that process than me anyway. After each unsuccessful attempt however I was able to revert by flashing a VZW no-wipe RUU and restore my backed up VZW ROM without problems.
Click to expand...
Click to collapse
Thank you for the information my friend, it's much appreciated.
pettigrew95 said:
I would guess whatever FW is the latest and greatest. I have a VZW 10...When you converted what was the process like? After converting you still get VZW full 4G LTE and advanced calling/video/WiFi calling? I'm running the VZW 1.82 FW right now but my ROM (LeeDroid) is based off of the 1.95 I believe. I'd like my FW to match the FW my ROM was based off of. Thanks!
Click to expand...
Click to collapse
Please take a look at one of my previous posts I'm not able to tell you about VZW features since I'm using the phone on a different network. I would guess advanced calling /Volte/etc wouldn't work, else people with the Unlocked phone wouldn't need to do a Verizon conversion.
The conversion process was simple, changed CID and ran the RUU exe from my PC.
---------- Post added at 09:08 PM ---------- Previous post was at 08:57 PM ----------
andybones said:
Do you mind posting the edited firmware, or is it posted and I'm blind?
I think the firmware will be found in the main threads before I am able to acquire it, but once ibdo get it I'll check in here.
I may have actually jumped the gun on much of any firmware changes, as I saw that there is an update coming in Santods ROM thread, so once the update comes we will see, hopefully if there's changes they are of use to us.
Thank you for the information my friend, it's much appreciated.
Click to expand...
Click to collapse
Andy here is the modified fw, I believe it's the same one used by the OP:
http://forum.xda-developers.com/htc...evelopment-t3376014/post68800346#post68800346
Tarima said:
Please take a look at one of my previous posts I'm not able to tell you about VZW features since I'm using the phone on a different network. I would guess advanced calling /Volte/etc wouldn't work, else people with the Unlocked phone wouldn't need to do a Verizon conversion.
The conversion process was simple, changed CID and ran the RUU exe from my PC.
---------- Post added at 09:08 PM ---------- Previous post was at 08:57 PM ----------
Andy here is the modified fw, I believe it's the same one used by the OP:
http://forum.xda-developers.com/htc...evelopment-t3376014/post68800346#post68800346
Click to expand...
Click to collapse
After flashing go into recovery then wipe then select format data then reboot recovery wipe everything again reboot recovery and then flash the the best way it worked for me