Related
SOLVED -- Pilot Error: CFIG -- ref' post at bottom
An Amazon/Woot! G-tablet arrived yesterday, and I'm struggling to learn it as I have NO smart-phone (nor, obv., Android) experience. (I've 44 years of mostly UNIX computers, and I've been networking since dARPAnet days.)
From the start, I was able to CONNECT to my house Wireless router (and get an assigned IP#) BUT nothing that "should"[?] connect to the Internet did: the browser couldn't pull up Google, BBC.com, etc. and the email s/w didn't connect to my gmail acct.
I didn't let that bother me as the Big Goal was to load GingerBread, which I did: Android 2.3.3 (Kernel Version 2.6.32.36-aosp a.k.a. "G_Harmony_Gingerbreadv2.3.3"). Also loaded CWM and GAPPS. 'Took a long time to get that installation process right, but everything seems stable EXCEPT I still CONNECT to my wireless router but cannot get any program to interact with the Internet.
Any suggestions as to HOW to debug or fix this?
Android remains a puzzle to me; I don't grasp its organization and management:
I haven't figured out how to delete a Music file yet! (Once 'did -something- that momentarily displayed a garbage can, but haven't been able to reproduce that.)
I have a 32GB SD card which the Tablet acknowledges, but I haven't ever "seen" it over the USB connection (to Windows 7), not have I seen any Android tools to display/access it. Is it mounted on a UNIX-like directory? Or is it Invisible as an entity?
The #$%^'ing beast disconnected during my download of several books-on-CD (rip'd to MP3's) and now says the SC card is messed up... so I guess I have to erase it and download the data again... hoping it won't disconnect once more.
'Guess it's time to order a book on Android... sigh. If there are any online Primers you'd recommend, I'd appreciate a link!
Thanks, John
_______________
Edit: PS -- Erasing the SD card didn't fix the problem: I still get "an error was encountered on your SD card" when I go to the Music player. 'Guess that means using CWM to format something. More sighs....
_______________
Edit2: PPS -- Yet re-booting restored the Music files... however Windows 7 continues to think the tablet's "drive" needs an error scan/repair. O grief....
Do you have a file explorer installed? That wold easily let you delete and move files.
Your micro SD will not be detected by your computer. You will need to mount your device to the PC and load files onto internal SD then move them to the micro SD with a file explorer. Or you can get a usb SD reader and load them directly.
Do you have wpa or any other encryption running on your wifi? Different roms have trouble with certain protections. I suggest setting your router to accept only preset mac addresses you approve.
I might have disconnected with screen timeout. Set screen to never time out under settings.
Does your rom indicate internal mem as emmc or SD? Some are SD for internal and SD 2 for micro SD.
Mantara said:
Do you have a file explorer installed? That wold easily let you delete and move files.
Click to expand...
Click to collapse
I knew FE apps existed, but presumed there was SOME way to delete w/o them. And... since the beast won't communicate to the internet I have to find another way to load apps (via my W7 computer). [I've used Win7 to delete tablet files over the USB port -- gack... that's a nasty method.]
Your micro SD will not be detected by your computer. You will need to mount your device to the PC and load files onto internal SD then move them to the micro SD with a file explorer. Or you can get a suspect SD reader and load them directly.
Click to expand...
Click to collapse
I have a PC-attached SDHC reader and earlier looked at the SD card that way. However, I'm not sure what I can DO with data I load onto the SD card since I haven't been able to understand in what ways Android makes use of that SD card. [For example: if I placed a root-dir directory of Music on the card, would Android merge that with the internal Music files?]
Do you have wpa or any other encryption running on your wifi?
Click to expand...
Click to collapse
I have some encryption, perhaps WPA, but the Android wouldn't declare that it has a Connection if it hadn't properly matched the security methods on the router. [I vaguely recall seeing the tablet flash a box with the protocol details it found the router using.]
Very frustrating. I expected a more intuitive structure to Android, and fewer problems. I bought this for a trip I'm taking on Friday, but it looks like I won't have email and browsing on that trip.
Most roms have FE apps installed but I'm guessing the barebones GB doesn't.
Have you tried opening your wifi so no password is needed just to see if its a tab flaw in the wifi antenna?
Music players vary. Stock, no. Power AMP yes. With power amp and some free apps you can set the directorys they search for music in.
GB is nice but it is still very fresh and the kinks are still getting workred out in the version for Gtab. There still isn't drivers to enable hardware acceleration. I would seriously recommend vegan b5.1.1 or the clemsyn/calculin rom. Both are super stable and very streamlined. And both are fully tested by thousands of other moders. Worth a shot.
Router?
I have some encryption, perhaps WPA, but the Android wouldn't declare that it has a Connection if it hadn't properly matched the security methods on the router. [I vaguely recall seeing the tablet flash a box with the protocol details it found the router using.]
The fact it is connecting to the router leads me to believe you may have a configuration issue on the router. Do you have the router locked to Mac address filtering or restrictions on access? If that is the case, your tab could connect to the router but not the net.
Mantara said:
I might have disconnected with screen timeout. Set screen to never time out under settings.
Click to expand...
Click to collapse
I found where while-on-outlet timeouts could be turned off on the Initial Android (that came on the tablet); I have been unable to find anything which allows more than a 30 minute timeout period on GingerBread.
Does your rom indicate internal mem as emmc or SD? Some are SD for internal and SD 2 for micro SD.
Click to expand...
Click to collapse
I'm unsure where you're asking me to find this information: Within a PLUS/POwerOn boot (CWM)? or in the [lame] Storage information under Settings?
greymane98 said:
The fact it is connecting to the router leads me to believe you may have a configuration issue on the router. Do you have the router locked to Mac address filtering or restrictions on access? If that is the case, your tab could connect to the router but not the net.
Click to expand...
Click to collapse
I've set nothing fancy on the router beyond basic encryption. I often have friends' computers in here for repairs, and those aren't blocked. Still, opening the router up is an interesting test for manana. Friday a.m. I have to be up and off to the airport around 4am, so I shouldn't be floundering around with this just now!
You wouldn't be able to tell without a file explorer. Just realized that. There has been debate about standard android (emmc/sd) and tablet android (sd/sd2) drive labeling. Didn't know what the newest GB used for labeling drives. It has caused lots of confusion and lead many to accidently format their SD (internal mem ) with cwm.
BasiliskPie said:
I've set nothing fancy on the router beyond basic encryption. I often have friends' computers in here for repairs, and those aren't blocked. Still, opening the router up is an interesting test for manana. Friday a.m. I have to be up and off to the airport around 4am, so I shouldn't be floundering around with this just now!
Click to expand...
Click to collapse
Just to get it running for your trip you could at least try a froyo rom.
http://forum.xda-developers.com/showthread.php?t=884103
Mantara said:
Most roms have FE apps installed but I'm guessing the barebones GB doesn't.
Have you tried opening your wifi so no password is needed just to see if its a tab flaw in the wifi antenna?
Music players vary. Stock, no. Power AMP yes. With power amp and some free apps you can set the directorys they search for music in.
GB is nice but it is still very fresh and the kinks are still getting workred out in the version for Gtab. There still isn't drivers to enable hardware acceleration. I would seriously recommend vegan b5.1.1 or the clemsyn/calculin rom. Both are super stable and very streamlined. And both are fully tested by thousands of other moders. Worth a shot.
Click to expand...
Click to collapse
I'm worn out, and have to crash now. Those are good points, and I'll pursue them ASAP.
But I'll pursue snoring just now!
Thanks to all!
Ahhh, a new day... and yesterday's advice to follow up on... and a solution found!
Pilot Error: Controlled Flight Into Terrain [CFIT]
I went to turn off the WPA [or whaddeva] security on the wireless router... and couldn't! Couldn't open the router at the usual 192.168.1.1.
'Did an IPCONFIG and WHOA! Definitely non-standard IP addresses for a home Router/Gateway/etc. Very much like... oh Dang... like Modem-delivered addresses.
Now I recall: just before a recent trip I helped a friend in BudaPest set up a Vulkano link to his mother's ComCast TV service... and to test that it worked from my house I had to directly wire my computer onto the Modem -- Vulkano wouldn't work through my router w/o unknown configuration changes. And I never reconnected the router, nor turned it off, so my tablet was connecting to a disconnected router.
With the router re-cabled, everything works... almost: now the tablet works, but I can't get a stable connection through the WIRED connection to my main computer... the one which was working 15 minutes ago before I re-inserted the router!!! I'm NOT asking for help on that: a few more reboots or a cable change and it will resume working, but for now I've switched to wireless on the computer. [Do't even suggest the most-obvious! I rebooted the modem & switch several times, and the computer as well. But I've now removed Vulkano s/w so maybe that will get the WIRED connection back up after the next reboot.]
Sigh... mea cukpa, mea culpa, mea maxima culpa.
Now, back to packing for Colorado! Thanks again!
Able to connect to Wifi, But no Internet access
Hey guys. I am new to the forum, and I am sorry if this has been solved, but I have benn having a hell of a time trying to figure this out. I just gor my G-tab, and with some help from my friend, we rooted it, installed CW, and installed Vegan Ginger Edition. I have another friend who is running the Vegan 5.1, and he has the same issue. We are in a building that has a preinstalled wireless system. We can see the repeaters, and connect to them, but we are unable to connect to the internet. The system requires a login. Another friend has a Sprint HTC phone and he is unable to get the internet either. Any suggestions of ideas?
Hi,
I have a HTC Sensation XL running ICS, the device is not rooted. Does anyone know of any apps that I can use to remotely access a hard disc attached to my home router?
What I want to achieve is kind of my own cloud storage system, I have seen these networked hard drives that attach directly to your broadband router rather than being inside a P.C and then computers on the home network can access this hard drive via the router, kind of like a central storage area for every one in the household. Well I want to set up the same thing but with the added bonus of being able to access the HDD when I am out of the house as well, via my phone or android tablet. I spend a lot of time in the country on my own and fill my devices with music and films etc and basically I want to access my entire library of media remotely. I have tried drop box, sugar sync, Skydrive etc but they do not provide any where near enough storage space for my needs, at least not for free and if I can achieve the above I will not be limited by the storage capacity of the device.
I currently use Pocketcloud to access files on my PC when I am away from home and this is fine for when the computer is turned on but when its not obviously I cant access anything, my theory is that a HDD connected directly to my router would be accessible 24 hours day as it should be independent of my PC, the question is how to actually set this up.
I have tried using ES File explorer to detect my home network but it wont for some reason, I was hoping that if I got it to find my network it might allow me to do the above however I could be wrong so any advice that people could give regarding this would be great.
Thanks
Ben
I've searched around for some solid technique or, preferably, app that allows you to trick apps into thinking you are using Wifi when in reality you are still on 3g/4g.
- I am NOT looking for alternatives or workarounds for a specific app
I found it crazy that the iPhone has over a dozen apps, tweaks, etc that can easily do this type of thing, but the only stuff I've found on the subject for android were either ridiculous techniques that don't work, or people questioning WHY you'd want to do this...
If anyone has ANY information on this subject, please tell.
Is there a reason why this is so much harder on Android than on iPhone? I'd be happy to learn exactly what the problem is here.
bump
Im also interested on this. I have unlimited data and i find it ridiculous that devs make apps to only work on wifi. I use to use 3g unrestrictor all the time back when i had my iPhone.
bump
bump again...
Well i know this works with certain android games like zenonia and modern combat which require wifi not data connection so you can try it with other stuff. You have to be rooted.
The first step is to turn your Wi-Fi on and*download Android Wi-Fi tether app*available in Market.
Once you have the app downloaded, launch the app and go to Menu > Settings > Change > Setup Method and select Softap option.
Now start tethering and drag down the notification bar.
In case your Wi-Fi icon is still enabled, it means that you have done it right so far.
Do not press the Wi-Fi toggle icon and launch the game you want to play
-------------
I am a dishonest man, and you can always honestly trust a dishonest man to be dishonest. Honestly it's the honest ones you have to watch out for.
xMrArnoldx said:
Well i know this works with certain android games like zenonia and modern combat which require wifi not data connection so you can try it with other stuff. You have to be rooted.
The first step is to turn your Wi-Fi on and*download Android Wi-Fi tether app*available in Market.
Once you have the app downloaded, launch the app and go to Menu > Settings > Change > Setup Method and select Softap option.
Now start tethering and drag down the notification bar.
In case your Wi-Fi icon is still enabled, it means that you have done it right so far.
Do not press the Wi-Fi toggle icon and launch the game you want to play
-------------
I am a dishonest man, and you can always honestly trust a dishonest man to be dishonest. Honestly it's the honest ones you have to watch out for.
Click to expand...
Click to collapse
It didn't work.. My wifi is turned off as soon as the tethering starts. What app exactly am I supposed to use?
Thanks!
Try wifi tether for root users.
---------------------
Give me a thanks if i helped
Lg Lucid running Cm10
w/ Cm10 Kernel
Asus Tf700 running Cromi-X 4.6.5
w/ Max's v4 kernel
Some Android games and application require a Wi-Fi connection due to the large amount of data that they use. If you don't have Wi-Fi available, however, you won't be able to use the apps or play the games, even if you have a fast 3G connection. You can trick your phone into believing that the Wi-Fi is connected by saving a small text file to your SD card so the phone will play games and apps as if it's on Wi-Fi when it's only connected to 3G.
Things You'll Need
PC
Data cable
Text editing app
Instructions
1) Launch a text editing program on your computer and type "FALSE" in all caps. Save the file and give it the name "qaWifiOnlyMode.txt" exactly with all the lower-case and capital letters duplicated precisely, otherwise the Android operating system won't see the file. Close the text editing program.
2) Plug your Android device into your computer and drag your finger down from the top of the screen to open the notification area. Tap "USB Connected" and then confirm that you want to mount your SD card as a drive on the computer.
3) Find the qaWifiOnlyMode.txt file on your computer and click to select it. Press "Ctrl" and "C" to copy the file. Browse to the location of your Android device's SD card on your computer. In the base(root) directory, not in any sub-folder, press "Ctrl" and "V" to paste the text file to the card.
4) Drag down the notification area on your Android device and tap the USB connection to disconnect the device from the computer. Unplug the USB cable. Your device will now play games and apps as if it's on Wi-Fi even if it's only on 3G.
Diablo67 said:
Some Android games and application require a Wi-Fi connection due to the large amount of data that they use. If you don't have Wi-Fi available, however, you won't be able to use the apps or play the games, even if you have a fast 3G connection. You can trick your phone into believing that the Wi-Fi is connected by saving a small text file to your SD card so the phone will play games and apps as if it's on Wi-Fi when it's only connected to 3G.
Things You'll Need
PC
Data cable
Text editing app
Instructions
1) Launch a text editing program on your computer and type "FALSE" in all caps. Save the file and give it the name "qaWifiOnlyMode.txt" exactly with all the lower-case and capital letters duplicated precisely, otherwise the Android operating system won't see the file. Close the text editing program.
2) Plug your Android device into your computer and drag your finger down from the top of the screen to open the notification area. Tap "USB Connected" and then confirm that you want to mount your SD card as a drive on the computer.
3) Find the qaWifiOnlyMode.txt file on your computer and click to select it. Press "Ctrl" and "C" to copy the file. Browse to the location of your Android device's SD card on your computer. In the base(root) directory, not in any sub-folder, press "Ctrl" and "V" to paste the text file to the card.
4) Drag down the notification area on your Android device and tap the USB connection to disconnect the device from the computer. Unplug the USB cable. Your device will now play games and apps as if it's on Wi-Fi even if it's only on 3G.
Click to expand...
Click to collapse
Well, this whole text file thing didn't work for me. Do you have to be rooted for this to work?
It didn't work for me either and I'm rooted
Work for anyone
Did the above fix work for anyone?
.txt thing didn't work for me either and I'm rooted]
I am having a rooted phone with busybox and this text file trick doesn't work.
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
I've been searching for a way to fool apps into thinking their on WiFi. No luck.
I hate to beat the dead horse but I switched from an iPhone to a HTC One and its turning out to be a bad deal. Your telling me all these yrs and no one has been able to make one of the most basic apps the iPhone can get via cydia yet.
We should start a bounty ...
I'll throw in 100 to start it off with.
omf05 said:
I've been searching for a way to fool apps into thinking their on WiFi. No luck.
I hate to beat the dead horse but I switched from an iPhone to a HTC One and its turning out to be a bad deal. Your telling me all these yrs and no one has been able to make one of the most basic apps the iPhone can get via cydia yet.
We should start a bounty ...
I'll throw in 100 to start it off with.
Click to expand...
Click to collapse
It's pretty pathetic really
I'll be abroad next week and wanted to catch a bit of the French Open Tennis but one of the TV apps I'm using requires a wifi connection. The fact there is no workaround yet is almost as idiotic as the morons who implement this "feature" in their apps.
Why should I care if someone is dumb enough to rinse their 1GB Data limit when I have unlimited 4G internet?
I asked about this in the Xposed forum, since it seems like an Xposed module might be the way to trick apps into thinking you're on wi-fi.
For me, the issue is with PdaNet+. I have unlimited data with T-Mobile, and I can pair my tablet via bluetooth and use my phone's data on my tablet. However, some apps don't work because they don't detect a data connection (ie: wi-fi), even though there is one. I can browse the internet. I can browse Google Play. But I can't download anything from Google Play, because it keeps waiting for a network connection. I can use Facebook, but I can't use the Facebook Messenger.
The work-around I can use at home is to use a virtual wi-fi router program on my laptop, connect my tablet to my laptop's wifi, and then connect my tablet via PdaNet+ bluetooth. Even there's no data going through the wi-fi, it still "tricks" my tablet into thinking there's a network connection, and it proceeds to download through bluetooth. Of course, this only works at home or if I have my laptop with me.
Yeah, I can always just tether my phone to my laptop and run my tablet off the laptop's virtual wi-fi router (which I typically do), but that's slower, and again, only works when my computer is with me.
Planterz said:
I asked about this in the Xposed forum, since it seems like an Xposed module might be the way to trick apps into thinking you're on wi-fi.
For me, the issue is with PdaNet+. I have unlimited data with T-Mobile, and I can pair my tablet via bluetooth and use my phone's data on my tablet. However, some apps don't work because they don't detect a data connection (ie: wi-fi), even though there is one. I can browse the internet. I can browse Google Play. But I can't download anything from Google Play, because it keeps waiting for a network connection. I can use Facebook, but I can't use the Facebook Messenger.
The work-around I can use at home is to use a virtual wi-fi router program on my laptop, connect my tablet to my laptop's wifi, and then connect my tablet via PdaNet+ bluetooth. Even there's no data going through the wi-fi, it still "tricks" my tablet into thinking there's a network connection, and it proceeds to download through bluetooth. Of course, this only works at home or if I have my laptop with me.
Yeah, I can always just tether my phone to my laptop and run my tablet off the laptop's virtual wi-fi router (which I typically do), but that's slower, and again, only works when my computer is with me.
Click to expand...
Click to collapse
Could you provide a little more detail in how to do this? What program are you using on your laptop? So the phone is running PDANet and then you connect it to your laptop via Bluetooth. Then after that you connect your tablet to the laptop's virtual wifi router?
Don't know if I understood completely but thanks in advance.
taino211 said:
Could you provide a little more detail in how to do this? What program are you using on your laptop? So the phone is running PDANet and then you connect it to your laptop via Bluetooth. Then after that you connect your tablet to the laptop's virtual wifi router?
Don't know if I understood completely but thanks in advance.
Click to expand...
Click to collapse
I have T-Mobile's Unlimited plan, which has unlimited data and 5gb free hotspot. My phone is a T-Mobile branded Samsung Galaxy Light SGH T399. On my phone I have PdaNet+ installed, with the full unlock key purchased ($8).
There's a free one to try, to make sure it works with your phone; whether it works or not depends on the phone itself, the version of Android it runs, and the provider from which you got it (if you didn't get an unlocked version). For example, a particular phone might work fine with T-Mobile, but the Sprint version of that phone might not. That's why there's the free version - to test before purchasing. The limitation with the free version is that it times out after about ~10 minutes and you have to reconnect.
PdaNet can connect to your computer in 3 ways. Wifi, Bluetooth, or USB tethering. Again, depending on your phone, carrier branding, and Android version, some methods may work while others won't.
Wifi works just like any wifi hotspot. However, depending on the afore mentioned conditions, wifi hotspot might not work the way you want it to. For example, on my T-Mobile branded Samsung Galaxy Light SGH-T399, using the wifi hotspot on PdaNet also loads up the pre-installed T-Mobile hotspot, which drains the 5gb mobile hotspot allotment. I haven't found a way to break that on this phone. On other phones (like Nexus devices), I know there are ways to only use your phone's data, and not the hotspot allotment, but frankly, these are very complicated and need a VPN subscription (ie: more money) to work. Wifi hotspot use is often broken anyway, depending on your carrier and Android version.
Bluetooth and USB tethering work differently than wi-fi, but otherwise work essentially the same way as each other. Both require a companion program to be installed onto your computer. A good idea is to keep a copy of this program on your phone, so you can install it on other people's computers if necessary (and perhaps the USB drivers for your phone as well).
I haven't messed around with Bluetooth much, because the Bluetooth on my laptop (via a dongle) is glitchy as $#@!, and I've never been able to get PdaNet to work with it properly except for a couple times which didn't last. Actually, I've never gotten anything to work properly with Bluetooth on my laptop, so this is probably just a problem with my computer/dongle/drivers, and YMMV. On the few times I've gotten PdaNet or other internet via Bluetooth (which some phones have built-in, and don't require PdaNet at all), speeds have been much, much slower, and I'd rather tether via USB anyway.
I connect my phone's internet to my laptop with USB tether. Make sure USB debugging is enabled, and plug it in. Make sure it's set as a Mass Storage device (4.1 or earlier), or as a Media Device (4.2+). Then on your phone, open PdaNet+ and Activate USB Tether (you can do this before plugging it in, it doesn't matter). On your computer, load PdaNet, and select Connect Internet (USB). If everything has been set up correctly, it should say "Connected", and you can now use your phone's internet on your computer.
Here's the important part:
If you don't have an Unlimited plan, tethering (via any method) will suck down your data. If you do have an unlimited plan, there's an option in PdaNet's settings (on your computer) to "Hide Tether Usage". This uses a proxy or VPN (not sure which) to fool your provider into thinking you're on your phone, and not on your computer. This works for me, with my phone, on T-Mobile. No guarantees that this will work with other phones, or other providers. Try the free version first, monitor your data usage (use your provider's account app, not the built-in Android one), and see if it works for you.
As for the virtual wifi network, there are a couple ways to do this. The PdaNet program for your computer actually has this built into it. Once you're connected, select the "WiFi Share" option, and it'll set up a wi-fi network that you (and others) can use on other devices, like other phones, tablets, computers smart-TVs, etc. Obviously, the computer you're tethered to needs to have wi-fi capability for this to work. But as long as you have a wi-fi modem, it can be turned into a wi-fi router with this option. It's not as strong as a real wi-fi router, but you don't have to buy and network a different piece of equipment either.
There are also stand-alone virtual wi-fi router programs. The one I've used mainly is Virtual Router Manager beta 0.9. A while ago, I tried a newer, non-beta version, but it was extremely unstable, so I went back to the 0.9 beta. I haven't tried any newer version in quite some time. I used this when I had proper internet (cable) in my apartment, but wanted to use wi-fi instead of my phone's data to do downloads or updates on my phone.
Neither the Virtual Router Manager or the WiFi Share option on PdaNet are 100% stable. Every once in a while, something glitches out, and I have to reboot my computer (I usually reboot my phone at the same time, just to be sure). But hey, apart from the $8 for PdaNet+, I get unlimited mobile and home internet for $80/month, so I can't complain.
To recap, I have my phone USB tethered to my laptop (which is plugged into a 42" HDTV) via PdaNet+. I use a virtual wi-fi router option to give wi-fi to my tablet. One internet connection, 3 devices connected.
My problem is that, even though I own a laptop, it practically never goes with my anywhere. It sits on a cooling pad, plugged into 2 external HDDs and my 42" HDTV, and I sit at my couch with a wireless mouse/keyboard. But when I'm away from my apartment, and I have my tablet, there's certain things I can't do on the tablet connected via PdaNet and Bluetooth, because it doesn't have a wi-fi connection, and these certain apps don't detect a network connection.
Planterz said:
I have T-Mobile's Unlimited plan, which has unlimited data and 5gb free hotspot. My phone is a T-Mobile branded Samsung Galaxy Light SGH T399. On my phone I have PdaNet+ installed, with the full unlock key purchased ($8).
There's a free one to try, to make sure it works with your phone; whether it works or not depends on the phone itself, the version of Android it runs, and the provider from which you got it (if you didn't get an unlocked version). For example, a particular phone might work fine with T-Mobile, but the Sprint version of that phone might not. That's why there's the free version - to test before purchasing. The limitation with the free version is that it times out after about ~10 minutes and you have to reconnect.
PdaNet can connect to your computer in 3 ways. Wifi, Bluetooth, or USB tethering. Again, depending on your phone, carrier branding, and Android version, some methods may work while others won't.
Wifi works just like any wifi hotspot. However, depending on the afore mentioned conditions, wifi hotspot might not work the way you want it to. For example, on my T-Mobile branded Samsung Galaxy Light SGH-T399, using the wifi hotspot on PdaNet also loads up the pre-installed T-Mobile hotspot, which drains the 5gb mobile hotspot allotment. I haven't found a way to break that on this phone. On other phones (like Nexus devices), I know there are ways to only use your phone's data, and not the hotspot allotment, but frankly, these are very complicated and need a VPN subscription (ie: more money) to work. Wifi hotspot use is often broken anyway, depending on your carrier and Android version.
Bluetooth and USB tethering work differently than wi-fi, but otherwise work essentially the same way as each other. Both require a companion program to be installed onto your computer. A good idea is to keep a copy of this program on your phone, so you can install it on other people's computers if necessary (and perhaps the USB drivers for your phone as well).
I haven't messed around with Bluetooth much, because the Bluetooth on my laptop (via a dongle) is glitchy as $#@!, and I've never been able to get PdaNet to work with it properly except for a couple times which didn't last. Actually, I've never gotten anything to work properly with Bluetooth on my laptop, so this is probably just a problem with my computer/dongle/drivers, and YMMV. On the few times I've gotten PdaNet or other internet via Bluetooth (which some phones have built-in, and don't require PdaNet at all), speeds have been much, much slower, and I'd rather tether via USB anyway.
I connect my phone's internet to my laptop with USB tether. Make sure USB debugging is enabled, and plug it in. Make sure it's set as a Mass Storage device (4.1 or earlier), or as a Media Device (4.2+). Then on your phone, open PdaNet+ and Activate USB Tether (you can do this before plugging it in, it doesn't matter). On your computer, load PdaNet, and select Connect Internet (USB). If everything has been set up correctly, it should say "Connected", and you can now use your phone's internet on your computer.
Here's the important part:
If you don't have an Unlimited plan, tethering (via any method) will suck down your data. If you do have an unlimited plan, there's an option in PdaNet's settings (on your computer) to "Hide Tether Usage". This uses a proxy or VPN (not sure which) to fool your provider into thinking you're on your phone, and not on your computer. This works for me, with my phone, on T-Mobile. No guarantees that this will work with other phones, or other providers. Try the free version first, monitor your data usage (use your provider's account app, not the built-in Android one), and see if it works for you.
As for the virtual wifi network, there are a couple ways to do this. The PdaNet program for your computer actually has this built into it. Once you're connected, select the "WiFi Share" option, and it'll set up a wi-fi network that you (and others) can use on other devices, like other phones, tablets, computers smart-TVs, etc. Obviously, the computer you're tethered to needs to have wi-fi capability for this to work. But as long as you have a wi-fi modem, it can be turned into a wi-fi router with this option. It's not as strong as a real wi-fi router, but you don't have to buy and network a different piece of equipment either.
There are also stand-alone virtual wi-fi router programs. The one I've used mainly is Virtual Router Manager beta 0.9. A while ago, I tried a newer, non-beta version, but it was extremely unstable, so I went back to the 0.9 beta. I haven't tried any newer version in quite some time. I used this when I had proper internet (cable) in my apartment, but wanted to use wi-fi instead of my phone's data to do downloads or updates on my phone.
Neither the Virtual Router Manager or the WiFi Share option on PdaNet are 100% stable. Every once in a while, something glitches out, and I have to reboot my computer (I usually reboot my phone at the same time, just to be sure). But hey, apart from the $8 for PdaNet+, I get unlimited mobile and home internet for $80/month, so I can't complain.
To recap, I have my phone USB tethered to my laptop (which is plugged into a 42" HDTV) via PdaNet+. I use a virtual wi-fi router option to give wi-fi to my tablet. One internet connection, 3 devices connected.
My problem is that, even though I own a laptop, it practically never goes with my anywhere. It sits on a cooling pad, plugged into 2 external HDDs and my 42" HDTV, and I sit at my couch with a wireless mouse/keyboard. But when I'm away from my apartment, and I have my tablet, there's certain things I can't do on the tablet connected via PdaNet and Bluetooth, because it doesn't have a wi-fi connection, and these certain apps don't detect a network connection.
Click to expand...
Click to collapse
Thanks for the great explanation! This helps quite a bit. I'll give this a shot to see how it goes.
I have a grandfathered Unlimited Verizon Data Plan that my company is paying me to have. I do not like Verizon, and am out of contract, so I recently purchased a Nexus 5 and plan on paying monthly with Ting. I have to maintain a "company phone" but using Google Voice, and importing all my accounts, it is really trivial that I would be using the Nexus 5 on a different carrier, since they only subsidize their employees, the device does not actually belong to them.
Instead of leaving my GS3 in a shoe box somewhere or selling it, I wanted to try using it as a dedicated hotspot for my apartment since I live in an area that has capped data from ISP's and no real solution (read FIOS) yet.
I purchased a Netgear Wireless Bridge Adapter WNCE2001 and set it up to connect to the phone's wifi hotspot and plugged that into the WAN "internet" port of my router running Tomato 1.28 firmware.
All seemed ok as far as ability to surf the web, use netflix from my TV, etc however there was a huge problem with some of the things I host from my internal network, such as media servers Subsonic, and Plex.
I am not able to access anything hosted on my internal network from any external network, even though I have not touched or altered my configurations - just replaced the WAN / "internet" port of my router with the tethered data connection.
After days of research and reading I have attempted a few fixes, although none have truly worked so far:
1) I tried connecting the phone to an open VPN server and then routing that traffic through the built in wifi tethering . This indeed worked - I followed some threads linked below, and was able to verify that now everything on my network was using the Open VPN connection - however I could not figure out a way to forward the ports appropriately and access Subsonic or Plex from the outside world.
http://forum.xda-developers.com/showthread.php?t=1993689
http://forum.xda-developers.com/showthread.php?t=2317841
2) I attempted using SSH tunnel from a remote Linux Server and although I could verify tha the tunnel was getting data piped through, I could not actually access Subsonic or PLex from the outside world. I tried to use tsocks to force all traffic for each service to use an established SSH tunnel but did not have much success.
It is important to note that these methods were tested on a shared server of a friend of mines, as far as I know they do not have root access and can not alter the open VPN or Open SSH configs or manually open ports on the server side. I wanted to just test it out to verify that it could work because I do not have a dedi or vps at the moment, I would consider getting something small from digital ocean or Amazon EC2 if this could actually work.
3) Lastly, I tried to use this port forwarding app, which as far as I can tell did absolutely nothing
Any help or direction is much appreciated, at this point I am more frustrated because after hours of reading and trying things out I feel as though I am now even more confused as to why this isn't / can't / could be working?!?!
Another thread I found here that seems like maybe it could be similar is the ability of getting NAT free with XBL using tethered data. I dont play video games, but I am wondering if something similar could be done using a crossover cable to allow for opening up ports through the wireless ISP as well? The older computer I use to host my media stuff from is running Ubuntu, and I have a Macbook Laptop, I only run Win7/8 in VM's on occasion - ideally though I want to find a solution that only uses the Linux Laptop, the phone, and the router - I can't leave my laptop home.
TLDR;
Halp! :silly:
[old desktop]- - - - ->{ROUTER]- - - - - >[WIFI ADAPTER]- - - ->[TETHERED GS3]- - - >[VZW]- - -> INTERNETS :good:
How to I send media servers from one side to the other and avoid all the NATing and dynamic IP's ? :victory:
I use versavpn with verizon and connect with openvpn. They give 3 ports to forword and dedicated ip. You chose the ports u want to forward on there web site. I have plex and remote desktop and a ftp server running on my unlimited data Verizon plan 300 gigs used a month for 3 years now. This has worked OK for me. I also ditched the tethered phone and went for a 4glte router instead much less hassle.
Sent from my LG-VS980 using XDA-Developers mobile app
Should be easy as others have found this:
https://zepinventory.wordpress.com/2014/03/31/how-to-root-azpen-a727-tablet/
EDIT:
Must download the SDK for ADB drivers. No other generic ADB drivers worked. I tried a ton.
You can boot into stock Recovery by holding Volume+ when booting.
Google Root Genius. Worked like a charm on an AzpenA727 tablet. Had to try a couple of times but it was the simplest, quickest way to root. After rooting you'll have to go to the play store and get Root Checker and SU. To increase battery life get SetCPU which allows you to set CPU policy so that when the screen is off the cpu runs at a couple of hundred MHz, plus you can slow down the processor while it's in use also. Experiment to find the optimal settings between performance and battery life. You can also overclock the cpu but this may lockup the tablet. There are youtube videos explaining how to reset a locked up Android tablet.
I figured it out. I downloaded the SDK and used its drivers. Those were the only drivers that worked. None of my million ADB drivers worked in Android. So that did work. I actually manually pushed all the su files from adb shell. Just needed the missing link.
So follow the directions specifically.
Also, I'm rather impressed with the stock zippiness and battery life.
Microcenter is giving these away for $20. Worth every penny. I already have a Nexus 7 2013 and a HiSense Sero Pro. Couldn't pass up.
After I rooted. I installed Xposed and Gravity box. The screen sucks but I found lighter colors are better because the horrible viewing angles distort the darker colors. Changed the status/nav bar to white and its Much better.
sent from my Verizon G2
Thanks for the information folks. I just got one a few days ago from Microcenter as well. I was unhappy to find I could not set the External SD as the default download location for applications. Nor can I move apps to the external SD. I called customer service and was told the device was not able to do that because of how the developer set it up. Upon hear that I figured someone here if not a few would know how to do that. I'd really appreciate the information. Thanks
is there 4.4 for this tablet or any way to make it look like its 4.4
No 4.4 upgrade, but there's an app to make it look like it.
haldi15 said:
is there 4.4 for this tablet or any way to make it look like its 4.4
Click to expand...
Click to collapse
There's no 4.4 upgrade for it. If you install the Xposed framework and Gravity Box, there is an Android 4.4 KitKat app in the Play Store that claims to make it look like 4.4. I haven't tried it yet, and can't say how well it does.
The Xposed installer is here: http://dl.xposed.info/latest.apk
There's a thread on XDA Developers discussing a Gravity Box version for Jellybean here: http://forum.xda-developers.com/xposed/modules/app-gravitybox-v2-9-1-tweak-box-android-t2316070
There are a boatload of Xposed addons in the Play store.
---------- Post added at 02:16 PM ---------- Previous post was at 02:01 PM ----------
Lexx Diamond said:
Thanks for the information folks. I just got one a few days ago from Microcenter as well. I was unhappy to find I could not set the External SD as the default download location for applications. Nor can I move apps to the external SD. I called customer service and was told the device was not able to do that because of how the developer set it up. Upon hear that I figured someone here if not a few would know how to do that. I'd really appreciate the information. Thanks
Click to expand...
Click to collapse
Yeah, limited System Memory on this device is the biggest PITA.
There's an app on the Play Store called FolderMount that looks like it might be able to address the problem. (At a guess, it's creating symlinks pointing to the external card.) A search for FolderMount reveals several similar apps.
I have FolderMount downloaded, but haven't played with it yet. I want to make sure I understand the implications before I fiddle.
Curious to see how you make out with the folder mount bit. I just picked one of these up from Microcenter with coupon to get it for $20 and was wondering the same thing... but I'd rather not be the guinea pig
P.S. Used method in OP link to root no problem (Kingo method)
DMcCunney said:
There's no 4.4 upgrade for it. If you install the Xposed framework and Gravity Box, there is an Android 4.4 KitKat app in the Play Store that claims to make it look like 4.4. I haven't tried it yet, and can't say how well it does.
The Xposed installer is here: http://dl.xposed.info/latest.apk
There's a thread on XDA Developers discussing a Gravity Box version for Jellybean here: http://forum.xda-developers.com/xposed/modules/app-gravitybox-v2-9-1-tweak-box-android-t2316070
There are a boatload of Xposed addons in the Play store.
---------- Post added at 02:16 PM ---------- Previous post was at 02:01 PM ----------
Yeah, limited System Memory on this device is the biggest PITA.
There's an app on the Play Store called FolderMount that looks like it might be able to address the problem. (At a guess, it's creating symlinks pointing to the external card.) A search for FolderMount reveals several similar apps.
I have FolderMount downloaded, but haven't played with it yet. I want to make sure I understand the implications before I fiddle.
Click to expand...
Click to collapse
frieked said:
Curious to see how you make out with the folder mount bit. I just picked one of these up from Microcenter with coupon to get it for $20 and was wondering the same thing... but I'd rather not be the guinea pig
Click to expand...
Click to collapse
Where did you get yours? In my case, they opened locations in Brooklyn and Queens in NYC, and the Brooklyn store was a convenient subway trip for me.
If FolderMount is creating symlinks (and it's hard to imagine what else it could be doing), it shouldn't be too dangerous. You can get a system mightily confused with symlinks, but what you want to do here is mount a directory on /mnt/extsd to an appropriate location in the root file system.
I have to look around some more, as FolderMount seems to be sparsely documented. I want to make sure I understand what it's doing.
The other thing I don't know yet is external keyboard support. The device doesn't have Bluetooth, so a USB keyboard would be required. The FAQ says it can't use one, but I don't know it that's a limitation of the factory install that can be addressed by rooting, or if it's a hardware issue and USB host mode simply isn't supported, (Like no Bluetoioth, that may be a "design to cost" move.)
The device is useful enough as is that I'll live if I can't use a keyboard with it, but it would be nice. If nothing else, it's a good way to learn about Android in preparation for the sort of device I plan to get down the road.
Meanwhile, I've been having fun, and it's certainly worth what I paid for it.
Agree, totally worth the $20 even if I use it for nothing else than letting the kids watch netflix and play angry birds.
Got mine at the Long Island Microcenter.
I also found this thread which talks about swapping the mount points of sdcard and extsd but I dunno if I'm ready to take that step
http://forum.xda-developers.com/showthread.php?t=2263436
DMcCunney said:
Where did you get yours? In my case, they opened locations in Brooklyn and Queens in NYC, and the Brooklyn store was a convenient subway trip for me.
If FolderMount is creating symlinks (and it's hard to imagine what else it could be doing), it shouldn't be too dangerous. You can get a system mightily confused with symlinks, but what you want to do here is mount a directory on /mnt/extsd to an appropriate location in the root file system.
I have to look around some more, as FolderMount seems to be sparsely documented. I want to make sure I understand what it's doing.
The other thing I don't know yet is external keyboard support. The device doesn't have Bluetooth, so a USB keyboard would be required. The FAQ says it can't use one, but I don't know it that's a limitation of the factory install that can be addressed by rooting, or if it's a hardware issue and USB host mode simply isn't supported, (Like no Bluetoioth, that may be a "design to cost" move.)
The device is useful enough as is that I'll live if I can't use a keyboard with it, but it would be nice. If nothing else, it's a good way to learn about Android in preparation for the sort of device I plan to get down the road.
Meanwhile, I've been having fun, and it's certainly worth what I paid for it.
Click to expand...
Click to collapse
Swapping mount points
frieked said:
Agree, totally worth the $20 even if I use it for nothing else than letting the kids watch netflix and play angry birds.
Click to expand...
Click to collapse
My use case is eBook viewer. I have a lot of eBooks. I had been reading them on a Palm TX (yes, I still use a Palm OS PDA), but a bigger screen and more storage capacity is nice. I use the Android version of FBReader, an open source program by a Russian developer. It handles both Mobi (Amazon Kindle) and ePub (B&N Nook, Kobo Reader) formats, and I have books in both forms. (It doesn't handle DRM, but I don't get DRM protected books.)
I use a beta Android port of VLC for video, with video files stored on the external card.
Got mine at the Long Island Microcenter.
Click to expand...
Click to collapse
Didn't know they'd open one there. Where is it on LI?
I also found this thread which talks about swapping the mount points of sdcard and extsd but I dunno if I'm ready to take that step
http://forum.xda-developers.com/showthread.php?t=2263436
Click to expand...
Click to collapse
Thanks for the pointer. I'll go and look.
I'm an old *nix admin, who started on AT&T System V Unix long before Linux existed, so I grasp the concepts, and I've done stuff like that on larger machines. I just proceed very carefully. I prefer not to shoot myself in both feet...
This one, it's been there for years: http://www.microcenter.com/site/stores/westbury.aspx
DMcCunney said:
Didn't know they'd open one there. Where is it on LI?
Click to expand...
Click to collapse
I might try the mount point thing tomorrow. In theory it shouldn't break too much since it wouldn't be touching the system partition.
DMcCunney said:
Didn't know they'd open one there. Where is it on LI?
Click to expand...
Click to collapse
Merrick Ave. in Westbury. It's been there for at least 10 years.
Got my tablet yesterday as well, but can't seem to get either my Linux box or my Windows laptop to recognize it in ADB.
frieked said:
I might try the mount point thing tomorrow. In theory it shouldn't break too much since it wouldn't be touching the system partition.
Click to expand...
Click to collapse
The question is what you'll gain.
The scarce resource is System Memory. There's 787MB of it, and 1GB seen as SDcard. That hack lets you vastly expand the area seen as SDcard, but that's not the problem.
With my current set of apps loaded, and everything that can live on the SDcard moved there, the A727 thinks I have 118MB of System Memory free, and 728MB of the SDcard. I need more System Memory, but I don't believe that hack will provide it.
I'm still figuring out how the tablet divides up resources. I already had a case where there was a Google+ app upgrade, but it wouldn't install without a Google Play Services upgrade, and that wouldn't install because there was insufficient system memory. (How much system memory it wanted wasn't mentioned.) The fix was to uninstall Chrome (which can't be on the card.) That freed sufficient system memory to let me install the Google Play Services and the Google+ updates. After that, I could re-install Chrome. (I use Firefox as my usual browser, so could live without Chrome if need be, and Firefox can be moved to the card.)
If I can implement a hack that increases System Memory, I'll be a happy camper.
---------- Post added at 02:45 PM ---------- Previous post was at 02:38 PM ----------
gotroot801 said:
Merrick Ave. in Westbury. It's been there for at least 10 years.
Click to expand...
Click to collapse
My S.O. used to live in Bellmore, but I haven't had cause to be on LI for years. I missed MicroCenter opening there.
Got my tablet yesterday as well, but can't seem to get either my Linux box or my Windows laptop to recognize it in ADB.
Click to expand...
Click to collapse
Which flavor of Windows? The rooting method I used apparently can't be done from Linux.
I grabbed the 32bit version of the Android SDK, but couldn't get Windows to recognize the tablet from XP. It claimed it couldn't find the software to install the drivers, even though they were where I pointed. I grabbed the 64 bit version of the SDK and tried again from the SO's Win7 laptop, and it worked. From there, I could use Kingo Root to root the device.
Rooted, now can't connect to Internet
Went yesterday the new Microcenter in Flushing (actually Kew Garden HIlls) and Got the A727.
It worked fine with the store's wifi. Rooted it this morning now can't connect to internet at all through my home wifi. Other devices connect fine and I get a good private IP address on the A727, but I get the message " web page not available" in the browser and no other app can connect to the internet .
I tried everything including resetting, unrooting, restarting, turning off developer, nothing works.
thanks
You're probably connecting to your network but not authenticating.
thecensor said:
Went yesterday the new Microcenter in Flushing (actually Kew Garden HIlls) and Got the A727.
It worked fine with the store's wifi. Rooted it this morning now can't connect to internet at all through my home wifi. Other devices connect fine and I get a good private IP address on the A727, but I get the message " web page not available" in the browser and no other app can connect to the internet .
I tried everything including resetting, unrooting, restarting, turning off developer, nothing works.
Click to expand...
Click to collapse
I don't think rooting has anything to do with it. My A727 connected fine with my home network before and after rooting. In your case, it worked fine at the store because they run an open network with no authentication required.
What router do you have, and what security do you use? In my case, it's a Belkin router, and I use WPA2 encryption.
If I had to make a guess, your A727 is connecting to your network, but your network wants you to authenticate with a password, and you aren't seeing it.
Tap Settings, and select Wifi. If Wifi is off, you'll be prompted to turn it on. When Wifi is on, the A727 will scan for networks and display those it sees in range. Do you see your network SSID? Tap on it. You ought to be able to get to a place where you can provide your network password and properly authenticate.
DMcCunney said:
I don't think rooting has anything to do with it. My A727 connected fine with my home network before and after rooting. In your case, it worked fine at the store because they run an open network with no authentication required.
What router do you have, and what security do you use? In my case, it's a Belkin router, and I use WPA2 encryption.
If I had to make a guess, your A727 is connecting to your network, but your network wants you to authenticate with a password, and you aren't seeing it.
Tap Settings, and select Wifi. If Wifi is off, you'll be prompted to turn it on. When Wifi is on, the A727 will scan for networks and display those it sees in range. Do you see your network SSID? Tap on it. You ought to be able to get to a place where you can provide your network password and properly authenticate.
Click to expand...
Click to collapse
I use connectify on Windows 8.1 as the internet source.
I don't think it's an authentication issue. When I deliberately enter a wrong password authentication takes forever and connectify says no cliet connected. when I put the correct password it connects almost emmidietly and says 1 client connected, but still not able to load web pages or have any other app connect to the internet.
Try using an actual wireless router
thecensor said:
I use connectify on Windows 8.1 as the internet source.
I don't think it's an authentication issue. When I deliberately enter a wrong password authentication takes forever and connectify says no cliet connected. when I put the correct password it connects almost emmidietly and says 1 client connected, but still not able to load web pages or have any other app connect to the internet.
Click to expand...
Click to collapse
Hmmm. So your Win 8.1 box connects directly to your ISP feed, and you use Connectify to create a wifi hotspot and the Windows box as a wireless router?
According to Techend, at http://techzend.com/create-ad-hoc-wifi-hotspot-windows-81/ "I have read that many Android phones do not support ad-hoc connections, created by tools like connectify.", and you might be running into one of those cases. My wifi router isn't creating an ad hoc network, and I had no problems connecting to it with the A727 before or after routing.
You may need to get an honest-to-God external wireless router instead of trying to get your Windows machine to serve the purpose. (I'd recommend that in any case - your machine should be behind your router, not serving as your router.)
DMcCunney said:
Hmmm. So your Win 8.1 box connects directly to your ISP feed, and you use Connectify to create a wifi hotspot and the Windows box as a wireless router?
According to Techend, at http://techzend.com/create-ad-hoc-wifi-hotspot-windows-81/ "I have read that many Android phones do not support ad-hoc connections, created by tools like connectify.", and you might be running into one of those cases. My wifi router isn't creating an ad hoc network, and I had no problems connecting to it with the A727 before or after routing.
You may need to get an honest-to-God external wireless router instead of trying to get your Windows machine to serve the purpose. (I'd recommend that in any case - your machine should be behind your router, not serving as your router.)
Click to expand...
Click to collapse
Yes, my 8.1 is connected to a cable modem via Ethernet. I don't need a router because I don't connect other devices that often.
Connectify can create an encrypted access point, so that's not the issue. my Galaxy note 2 can connect withouth a problem to it, but not the ad-hoc.
Like I said, you may need a real router
thecensor said:
Yes, my 8.1 is connected to a cable modem via Ethernet. I don't need a router because I don't connect other devices that often
Click to expand...
Click to collapse
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can b used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Connectify can create an encrypted access point, so that's not the issue. my Galaxy note 2 can connect without a problem to it, but not the ad-hoc.
Click to expand...
Click to collapse
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
---------- Post added at 03:30 AM ---------- Previous post was at 03:19 AM ----------
thecensor said:
Yes, my 8.1 is connected to a cable modem via Ethernet. I don't need a router because I don't connect other devices that often
Click to expand...
Click to collapse
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can be used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Connectify can create an encrypted access point, so that's not the issue. my Galaxy note 2 can connect without a problem to it, but not the ad-hoc.
Click to expand...
Click to collapse
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
DMcCunney said:
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can b used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
---------- Post added at 03:30 AM ---------- Previous post was at 03:19 AM ----------
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can be used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
Click to expand...
Click to collapse
Thanks, but nevertheless I'd like a solution to this issue. I will try with a regular hotspot to see if that makes a difference.