Related
I had access to a Nexus Q, during the time i was using it, i flashed gapps on the Q's stock rom. My question is if i flashed gapps on the L9 (LP769) would gapps install properly? Is there a possibility of bricking my device (which i wouldn't mind because i have a backup)? Although the Nexus Q's bootloader was unlocked, I'm sure that would't have changed the outcome. The only thing that's truly bothering me is since the Q is a Nexus, and since gapps seems to be heavily based of of vanilla android, wouldn't that mean flashing gapps on the L9 more prone to failing? I wouldn't mind being the first to try, but i would like your suggestions.
My phone is dead and I'm not going to be home for about an hour and a half, if not i would try it.
It worked, but it didn't change much, PM me if you want details.
I'm sure people were getting pretty tired of hearing about the radio issues when people flashed cyanogenmod (ie, LTE worked, but no SMS, MMS, or voice calls, odin didn't fix, the only solution was to factory restore from WITHIN a TW ROM). After waiting a while for things to calm down, I'm ready to try to install Cyanogenmod again but I am naturally hesitant.
Has this issued resolved itself? I'm running rooted and unlocked MC3 with CWM installed. I heard somewhere that flashing the MJ9 radio BEFORE Cyanogenmod 10.2 / 11 fixed the problem?
I would really appreciate any input or personal experience here!
As far as I know, the issue has not resolved itself. I tried flashing the newest CM 11 a couple of days ago (I think it was the nightly build on the 22nd), and I still had the funky radio issues. However, I tried this, and it fixed all the radio issues with CM 11 (and any other Android 4.4 ROMS - I'm running Slim ROM at the moment)... Here is my post from another thread.
Hey all, I got it working (the data/network connection that is), with a little effort. Here is what I did in sequence...
1) Reflash the ORIGINAL VRALJB image via ODIN. I used the one found here. You want to make sure you get the one that replaces EVERYTHING, i.e., NOT the alternative restore.
2) I set up my phone and used it normally for about four hours. (This may or may not be necessary, I'm not entirely sure. I also rebooted the phone about five times during that time frame.)
3) I unlocked and rooted the phone via the method outlined here. After that was done, I installed CWM 6.0.4.3 via TWRP (which the unlocking process installs).
4) I then installed CM 11 and the respective Google apps. (I first did a backup, then a factory reset, then cache wipe, then dalvik wipe. The next thing I did was install CM 11, then Gapps.)
5) Restart the phone and success!
Click to expand...
Click to collapse
The reason why I found out that this method would work, is that I tried installing CM 11 on my dad's phone. He has had a TW ROM (Beans build to be exact) since the phone came out. And he has been running the stock VRALJB radio. With that said, I figured I would try flashing the stock ODIN files to restore my phone back to the VRALJB. (I think I was running the MJ9 prior to this) That worked, and the SlimROM has been working perfectly ever since!
[Also, if you wanted to check out SlimROM, you can find a link to it here.]
Still looking for some more feedback from users! Anyone successfully flashed CM 10.2 / CM 11 from MC3 without problems / fixed the problems?
I am currently running CM11 and dealing with a lot of the problems that cm10 had. So tried CM12. Basically dead in the water. Never got past registration.
Very sluggish and the keyboard keeps disappearing. The installation of CM11 went pretty smoothly following the install instructions. Not so with CM12.
Maybe there is something I am missing. The instructions say that repartitioning is not necessary !?!??!
Anyway followed the instructions to the letter. Got the suggested recovery and flashed it just like on cm11. The correct gapps to use is always a crap shoot so I tried several. I even installed without gapps still had problems.
So any help here would be appreciated.
thanks
I have been testing CM12 for a few weeks and have a few of the same problems. It seemed like at first it was pretty snappy, but now it's sluggish, keyboard disappears constantly, and my biggest pet peeve is that quite a few of my apps are now unavailable for this device. They worked before, so it's a bug in CM or one of the newer Android versions. I'm just going back to an older ROM for now.
Hi cosmic_kid
I'm asking these same questions in the cm12 QA and dev pages and not getting anywhere. They all tell me to go read some more or stop being rude !?!??!?!
I am currently running cm11 and only have the usual problems just like cm10 had. i.e. battery, black out, losing wallpaper.
So I thought cm12 should be a piece of cake !!! NOT SO !!
There must be something different with the install that is screwing something up.
I tried the recommended eng recovery and the latest TWRP and CWM. Same results. After gapps is installed things go to heck.
I did try running cm12 before installing gapps and it ran smooth. After gapps sluggish and never got past registration. Keyboard never came up !?!?!?
I don't know what to do so I will download the latest nightly and try again.
I Feel Your Pain!
Guys, I know exactly how you feel. I merged the partitions according to the other posts, formatted cache and userdata to f2fs and tried all the nightlies that came out, but keyboard problems, superuser problems and setup crashes just made it impossible to get anything going on my trusty 8gb Nook (BNTV250A). The closest I got to getting anywhere with CM 12 on it was when I updated the CM 12 March 26th nightly on CM 11-M12 and added pa_gapps-modular-nano-5.0.1-20150315-signed. Play store worked, I was able to get into developer options and enable root access and it looked hopeful, but alas it was so slow and lagging that I have given up for now. I used repart.img to go back to stock, (touch pad didn't work on stock since I had upgraded to 10 touch!) booted off SD and installed CMW recovery to restore my CM 11 -M12 configuration. I'm staying in touch through all the threads and hopefully we will one day have a smooth CM12 on our beloved Nooks!
CM12 is now working very smoothly on my 16gb nook. I didn't have to repartition anything. I just about got rid of my 16gb nook because it's older and slower than the newer 8gb nook. Glad I didn't.
So until there is a "how to" thread on how to get it to work on the 8gb nooks I will be using the older one.
The devs said that they didn't have a 8gb model to test their nightlys on. I'm wondering if they test them at all ???
What did you do to get it to run smoothly? I have the 16GB and it slows down all the time with CM12. I read gapps causes a lot of head-aches so I've been tempted to run without it and just side-load all my apps... :/
cosmic_kid said:
What did you do to get it to run smoothly? I have the 16GB and it slows down all the time with CM12. I read gapps causes a lot of head-aches so I've been tempted to run without it and just side-load all my apps... :/
Click to expand...
Click to collapse
pico gapps and Demetris' 16GB CM12 with the Tricker Mod stuff = faster than they day I bought it.
Now I just need 8GB working the same, since I have two of those!
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Atronid said:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Click to expand...
Click to collapse
Thanks for your reply!
Yes, I do have used ROMs compatible with my device as they've all are made for espresso3g (which is my device).
I know it's not really the best way but I'll keep on trying with custom recovery for some more time and then perhaps try buying a new cable, and see if that works.
Tried installing Google Play Store from APK both on a clean ROM without GApps and with, but it still doesn't run and keeps on saying that either Google Play Store or "com.google.process.gapps" has stopped.
Alright...
I'm out of idea x/
lordquestionmark said:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
r&xp said:
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
Click to expand...
Click to collapse
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first seems to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
lordquestionmark said:
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
Click to expand...
Click to collapse
Ok...
This is what I would do if it was my device and I was facing what you are describing. It might take some time and a little patience to do everything described here, but it might also work.
1. Usin Odin, flash latest available official rom for the device. Let it boot and complete setup.
2. Use odin and use CF autoroot to root. Again boot and complete setup.
3. Flash Twrp. Enter Twrp and flash latest flashable supersu.zip. At this time I believe is version 2.82. Again boot and let it reach your welcome screen.
4. Enter Twrp. Enter advanced wipe. Wipe everything except external SD and usb at least 3 times. Do not exit twrp.
5. Install you rom. Do not exit Twrp.
6. After installing your rom, Twrp will ask you if you want to wipe cache/dalvik. "Yes" but DO NOT reboot.
7. Install correct version of gapps for your custom rom (correct both android version and architecture version). Again twrp will ask you to wipe cache/dalvik. "Yes" and this time reboot.
See what happens. If it gets stuck, try entering twrp again and do a factory reset only, only once and reboot again.
If that fails again... I will at a loss here myself too...
I did a quick search here on xda on P5100, I am providing some links that you can take a look at. You probably already searched yourself but you never know...
https://forum.xda-developers.com/ga...-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-blissmallow-t3312320
https://forum.xda-developers.com/showthread.php?t=1686514
https://forum.xda-developers.com/showthread.php?t=2581782
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-candy-5-v2-5-5-t3136904
If nothing else helps, perhaps the best way to go around this would be to find a custom rom with at least some google apps pre-installed, in order to save you the trouble you are currently facing.
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
did you find a solution
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hey, just try uninstalling Google play services and install them again. I faced the same issue and now it's all working on my Samsung Galaxy Core 2
Hi everyone,
My phone has this restarting loop issue after flashing either Candy7 or CM13 ROM. Not sure if this is bootloop error because It got pass the Huawei booting logo, but as soon as it finish loading the Google App and go to the OS home screen it restart again and again. Worth noting that the phone restart from ROM loading logo (the blue face for CM13 or the Google Dot for Candy7), not all the way back from Huawei booting logo.
First I use TWRP to factory reset wipe, then advance wipe /system, /data, /cache / Dalvik, then install new ROM + Gapp, and got the sucess message, then reboot to system.
I also tried with out Gapp to save loading time, and it restart again when get to OS home screen.
Please advise what may cause this.
No issue when i restore back to B322 EMUI 3.1
I have US version unlocked MT2-L03, B322 version, unlocked bootloader, rooted, TWRP 3.1.1.0 installed.
I made a video clip of the looping: https://www.youtube.com/watch?v=Y7kRpdGN2qA
I'm going through the EXACT same thing. I tried CM13, CM14 and even CandyRom, and the same thing happened more or less. Even if I got the ROMs running for a while, eventually that LOD (Loop of Death) would hit and I'd have to again reflash. I'm now back to B322 (Lollipop) for stability.
Given that the SAME thing is happening on all those ROMs, it's leading me to think that perhaps there is a software issue with my phone. Not sure if this helps, but I do think it could be the way I updated to Lollipop (B322) from the original Jelly Bean (B148). I've done a LOT of digging, and it looks like the way I did it was not quite right, even though my phone has worked fine all this time.
Here is the XDA post that seems to detail the correct upgrade path to B322:
https://forum.xda-developers.com/ascend-mate2/help/how-to-update-unlocked-mt2-l03-to-t3422775
Basically, it looks like the correct path should be B148 (Jelly Bean) --> B309 (Lollipop) --> B322 (Lollipop)
Being rather new, I just flashed to B322 right off of B148. I am now wondering if this could be the source of my problems. Especially since I keep getting the "Error 7" for "unknown bootloader" whenever I use TWRP 3.1.1 to flash LineageOS or CandyRom.
But, if you successfully used TWRP 3.1.1 to flash, that means your bootloader was recognized (I got the Error 7). If that's the case, then we're both having the same issue and something else is indeed the culprit.
I strongly suspect that "something else" could be GAPPS. I've experimented with several GAPPS packages, and noticed that right before crashing and the dreaded infinite loop, something glitched involving Google apps.
Desperately want to leave Lollipop since Oreo is about to drop meaning we Android L users are in for a world of hurt if we can't migrate soon. :-\
I upgrade my phone B148-B309-B322. I also get error 7 whenever I flashed the ROM, so I have to manually delete '"assert" command line from ROM script to flash successfully.
Error screen shot: http://imgur.com/zzTbjRJ
hondaman82 said:
I upgrade my phone B148-B309-B322. I also get error 7 whenever I flashed the ROM, so I have to manually delete '"assert" command line from ROM script to flash successfully.
Error screen shot: http://imgur.com/zzTbjRJ
Click to expand...
Click to collapse
My phone has been rooted for over a year now, I've had many roms on it doing that time. This loop started with a app I updated from the play store. Not sure it may be substratum will look into it when I have more time..
These problems is because of the room. Try to install lineageOs.
Thanks Kevinoriej,
Same looping issue on LineageOS, after loading to OS homescreen , phone restart.
Also get error 7, and manually remove "assert" lines in the ROM script in order to flash.
hondaman82 said:
I upgrade my phone B148-B309-B322. I also get error 7 whenever I flashed the ROM, so I have to manually delete '"assert" command line from ROM script to flash successfully.
Error screen shot: http://imgur.com/zzTbjRJ
Click to expand...
Click to collapse
I believe the Error 7 message is because your bootloader is showing as "unknown". I downloaded an app from the Playstore that gave me my device's technical info, and sure enough, my bootloader is listed as "unknown". I forwarded a question to Huawei's EMUI team asking them if that happened due to unlocking it (using Huawei's official unlocking request). Still waiting for a replay. In order to get any of the ROMs to install, I had to downgrade TWRP to 2.8.7.0. Any version above that would trigger Error 7.
Out of curiosity, I then downgraded and flashed CandySix (with a corresponding GAPPS package) - and sure enough, the same looping happened. And again when I flashed CM13 AND LineageOS. The phone would successfully boot, get to the actual Start screen, and then boot again. I could NEVER predict exactly what triggered this. Also, I tried installing ROMs without GAPPS, and that didn't go well for me (couldn't get any of them to load properly without flashing a GAPPS package for some reason).
Something goofy seems to be happening between Google services and the custom ROMs on this phone. I'm not sure what's triggering it, but given the sheer number of different ROMs I've tried - ALL of which have the EXACT SAME ISSUE - I strongly suspect there is indeed a GAPPS problem lurking somewhere.
As a side note - I reflahsed B322 (restoring from backup) and the phone is again as stable as it has always been.
Is there an EMUI GAPPS package for Marshmallow and/or Nougat (i.e., pulled from Mate 7, 8 or 9) available for download? I'm game for testing.
RE: MT2 boot loop
(*** SEE POST #25 FOR UPDATED FIX!***)
I just noticed this thread, wish I found it earlier. I recently posted my discussion of the boot loop (and fix) here:
https://forum.xda-developers.com/ascend-mate2/orig-development/cm-nougat-mt2-t3478345/page14
Bratzilla was right when he said in his post, "I strongly suspect there is indeed a GAPPS problem lurking somewhere".
Thanks EndlessFall,
please help to check this link: github(dot)com/opengapps/arm/releases/download/20170811/open_gapps-arm-7.1-pico-20170811.zip
no files listed.
RE: dead link for Open GApps previous versions & boot loop fix
Strange, it seems that in the past day Open GApps has purged their GitHub archive. The "Older Releases" button at their website still redirects to the GitHub repo, but it no longer displays any version other than the current one.
As long as it does not violate any policy, I can always post a copy of the Open GApps 08/11/17 ARM 7.1 Pico package.
Although I have not tried other GApps distributions (Delta, Beans, etc), in theory there is no reason why they shouldn't work, as long as Google Play Services is not newer than v11.3.02. I recommend the minimal GApps available. Installing "pico" was an important part of isolating, and simplifying the search for, the culprit.
As I mentioned in my original post, I tested all versions of Google Play Services on apkmirror newer than v11.3.02 (build format 436 for MT2L03), up until 08/26. All newer builds induced an immediate boot loop. A future version may resolve the boot loop issue and work fine on the MT2L03, but it does not seem to be available as of today.
Have been running custom ROMs on my MT2L03 for years. Boot looping problem began for me two weeks ago when I completely wiped/formatted my CandyROMs v7.1.2 06/15 install and flashed MDMower's 08/19 LineageOS. Began digging deep into the cause (knowing MDMower would not release garbage) and discovered the connection to Play Services. Have been running MDMower's LineageOS & CandyROMs v7.1.2 ever since without any issues.
Remember to use MDMower's TWRP v3.1N0-0, it is much more stable on the MT2L03.
Thanks again Endless,
I follow your instruction to flash Candie ROM and the matching GAPP from 6/15, all went well, no more bootloop. I will check the phone from time to time to see if the Loop of death come back, maybe once GAPP get updated it may come back. LOL... hopefully not though.
RE: MT2 boot loop fix (workaround)
Great, hondaman82 - so glad it worked for you. Funny, the exact same environment that you are using (06/15 CandyROMs with the matching 06/15 Open GApps) is what served as my "proof of concept" that current Open GApps with updated Play Services was likely the problem.
Although the proper GApps package resolves the boot loop issue, it is important to point out that it's more of a workaround than a fix. The root cause might be a bug in the AOSP/LineageOS source code itself, preventing MT2L03 compatibility with the latest versions of Play Services.
MDMower has just released a new build of LineageOS dated 08/29/17. I'll continue to test the latest ROMs with the latest GApps & Play Services to see if new commits/updates fix the problem...
hondaman82 said:
Thanks again Endless,
I follow your instruction to flash Candie ROM and the matching GAPP from 6/15, all went well, no more bootloop. I will check the phone from time to time to see if the Loop of death come back, maybe once GAPP get updated it may come back. LOL... hopefully not though.
Click to expand...
Click to collapse
EndlessFall said:
Great, hondaman82 - so glad it worked for you. Funny, the exact same environment that you are using (06/15 CandyROMs with the matching 06/15 Open GApps) is what served as my "proof of concept" that current Open GApps with updated Play Services was likely the problem.
Although the proper GApps package resolves the boot loop issue, it is important to point out that it's more of a workaround than a fix. The root cause might be a bug in the AOSP/LineageOS source code itself, preventing MT2L03 compatibility with the latest versions of Play Services.
MDMower has just released a new build of LineageOS dated 08/29/17. I'll continue to test the latest ROMs with the latest GApps & Play Services to see if new commits/updates fix the problem...
Click to expand...
Click to collapse
Have you had the chance to try 0829 Build of Lineage OS with newer GApps? TIA.
Oh nooo.. the LOD (loop of death) come back, after 3 days of working OK... sigh.... back to EMUI stock
RE: new ROM builds, GApps, & boot loop issue
Yes, I tested MDMower's LineageOS 08/29 last night using the 08/29 Open GApps package. Unfortunately, the boot loop bug persists. However, the 08/29 LineageOS runs great with Open GApps 08/11 and is worth installing (at least for me). Hopefully MDMower will keep up the good work and release a build in the next week or two with the Sept security patch.
I'll continue to test and report back if there is any progress...
MT2-User said:
Have you had the chance to try 0829 Build of Lineage OS with newer GApps? TIA.
Click to expand...
Click to collapse
EndlessFall said:
Yes, I tested MDMower's LineageOS 08/29 last night using the 08/29 Open GApps package. Unfortunately, the boot loop bug persists. However, the 08/29 LineageOS runs great with Open GApps 08/11 and is worth installing. Hopefully MDMower will keep up the good work and release a build in the next week or two with the Sept security patch.
I'll continue to test and report back if there is any progress...
Click to expand...
Click to collapse
Thanks!
RE: return of boot loop
Sorry to hear that Hondaman82.
I can only speak from my own experience, which is that my MT2L03 has been stable for the past 2 weeks using Open GApps pico dated no later than 08/11. It is possible that your Google Play Services was auto-updated to a version newer than v11.3.02 (inducing the loop), but you won't be able to tell because you can't boot the corrupted OS to read the version number in app settings. If my boot loop returns, I'll do an ADB pull from TWRP to examine the Play Services package version (curious to see if there is an update correlation).
Goes to show what I mentioned yesterday, which is that the root cause is likely some incompatibility between the ROMs customized for MT2L03 and Play Services that can only be fixed by a commit to the ROM source code, a script, patch, or change to Play Services.
Let's see what happens, perhaps MDMower would be willing to offer his expertise? I visited Matt's website, GitHub and XDA profile, but it seems difficult to contact him directly....
hondaman82 said:
Oh nooo.. the LOD (loop of death) come back, after 3 days of working OK... sigh.... back to EMUI stock
Click to expand...
Click to collapse
RE: preventing Google Play Services auto-update
(***SEE UPDATED FIX IN POST #25!***)
For those of you willing to experiment further, there is a method that supposedly disables Google Play Services from updating. This might allow you to "lock in" v11.3.02 until there is a proper fix for the boot loop:
https://forum.xda-developers.com/android/help/delete-disable-downgrade-prevent-update-t3091832
Basically, this involves using a root file manager to create two empty folders entitled "com.google.android.gms-1.apk" and "com.google.android.gms-2.apk" in the "\data\app" directory, causing auto-update to fail.
I haven't used this hack, try at your own risk!
Of course, this works off of the assumption that updating Google Play Services beyond v11.3.02 is the only factor involved in the boot loop. I just haven't dug deep enough...
Mine (Candy 0725 build) went into LOD by itself a moment ago
Does anyone have a B322 TWRP backup ZIP? I as of this morning have 2 MT2 phones dead. One went into LOD about 3am and the other about 4am.