Hello
I installed firmware I9300XXUGMK6_I9300OXAGMK6_BTU.
I rooted the phone., downloaded the CSC changer and changed my product code from KOR to XEF (France).
Next I installed the French firmware I9300XXUGNA5_I9300OXXGNB2_XEF. Which works fine. The French firmware is slower than the UK firmware and there is no gallery app. So I downloaded the CSC changer again and tried to set my CSC to BTU but BTU was not showing in the list of CSC codes?
Nevertheless I reinstalled the BTU firmware without changing the CSC code. However the phone now will not boot. It's stuck on the Samsung Logo.
How can I change the CSC code to BTU when I have the XEF firmware installed?
Thanks
Factory reset after setting csc.
Related
Hi there, got s3 from 3 uk network, my phone kept saying this device is not up-datable though Samsung kies so i flashed lg8 firmware , i then changed the csc to BTU and everything was fine phone was seen as up-datable through kies but now when i go on to get the modem update thats out it seems kies is detecting my phone as H3G again, GRRRR.
I downloaded csc select app from the play store and it is saying that my product code is BTU but kies says H3G , any advice for me to keep it BTU ?
Cheers
I flashed a different stock firmware on my Samsung Galaxy Alpha. Previously I was on ORO but now I use DBT. To check the CSC I did the following:
dial *#1234# -> I see the correct DBT values: "AP: G850FXXU2BNK1", "CP: G850FXXU1BNK1", "CSC: G850FDBT2BNK1",
changed the values in the "efs/imei/mps_code.dat" and "system/csc/sales_code.dat" files to DBT.
booted in recovery and there I see it's applying DBT
However, Kies3 is showing a 4th value, which is still stuck on ORO. This is confirmed by the "Phone INFO" app, which shows "Product Code: SM-G850FZWEORO". DBT got just the other days an update, but Kies3 is telling me there isn't any. I've tried using a plethora of CSC changing apps but was unsuccessful.
What am I doing wrong and how can I completely change the CSC?
Resolved
It seams that the solution to "completely" change the CSC after flashing a new firmware is to do a factory reset of the phone. Of course all the data gets erased, but that's what backups are for.
After the factory reset, there's no track of the old CSC. Keis sees the device correctly on the new CSC.
I bought SGS6E from polish operator Plus - with CSC PLS.
I found polish XEO (i was thinking that):
XEO-G925FXXU1AOCV-20150410142820.zip
flashed via ODIN. Everything went ok. But the CSC that phone show is... TPH for Portugal.
It is possible to change CSC without waiting for new firmware (good) for XEO?
Did you perform a factory reset in recovery as that resets the csc.
Otherwise maybe phone tools Samsung from the marketplace?
On the screen i seen
Appiled multi-csc. Csc appiled: TPH
arybak said:
I bought SGS6E from polish operator Plus - with CSC PLS.
I found polish XEO (i was thinking that):
XEO-G925FXXU1AOCV-20150410142820.zip
flashed via ODIN. Everything went ok. But the CSC that phone show is... TPH for Portugal.
It is possible to change CSC without waiting for new firmware (good) for XEO?
Click to expand...
Click to collapse
Hey,
No way to do that. The problem is that even if you download FWs from sammobile that have different CSCs - based on my experience - they will default to something else. On my Galaxy Alpha which originally had XEH I flashed a XEF ROM and there was no way back. Sad but true.
The only good thing with the S6 is that with the currently available 5.0.2 ROMs you can still achieve root without loosing the warranty. And after root you can change the CSC and then can flash the original ROM which will NOW default to CSC you just set. But only if it contains that CSC package!
Hope I could help!
Cheers,
TT
arybak said:
I bought SGS6E from polish operator Plus - with CSC PLS.
I found polish XEO (i was thinking that):
XEO-G925FXXU1AOCV-20150410142820.zip
flashed via ODIN. Everything went ok. But the CSC that phone show is... TPH for Portugal.
It is possible to change CSC without waiting for new firmware (good) for XEO?
Click to expand...
Click to collapse
I had the same problem first get your firmware from sammobile flash it through odin
then factory reset from stock recovery it will chose a random CSC but dont worry once you setup your new device go into the setting>backup and reset>factory reset. make sure you dont have automatic restore.
after reset setup device again then Open your phone’s dialer and type the following code with your device IMEI number: *#272*Phone’s IMEI Here#
it should automaticaly take to your csc changer screen pick ur one then install
hope it works !
ishanmu said:
I had the same problem first get your firmware from sammobile flash it through odin
then factory reset from stock recovery it will chose a random CSC but dont worry once you setup your new device go into the setting>backup and reset>factory reset. make sure you dont have automatic restore.
after reset setup device again then Open your phone’s dialer and type the following code with your device IMEI number: *#272*Phone’s IMEI Here#
it should automaticaly take to your csc changer screen pick ur one then install
hope it works !
Click to expand...
Click to collapse
How it works : on devices where dialer NOT shown up CSC changer (e.g.: 920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !
Can I change the CSC on an 925F to something non F? Currently mine is coded THR (Iran) and I wish to change it to something USA related. I'm hoping to activate Samsung Pay but from what I've read the change will require root which will trip Knox which won't allow Samsung Pay to work. Am I right?
Working for Galaxy s6 Edge in COJ9 ? If yes I will restore it
damm i wish i found this thread some hours ago ... same prob with G925FXXU3COI9_G925FOXX3COJ1_G925FXXU3COI9_HOME.tar as XEO CSC declared ...
coming from DBT -->> BTU --> trying jump to XEO with Firmware found by SamFirm , but failed.. every try it switches to TPH anywhere with CSC/Firmware i come from.
after read this thread i give up my trys
so go back to BTU and hope OTA Update to marschmallow comes next days ...
greetings from germany
So finally there is no option to install CLEAR XEO when you have brand? The same as author. Comming from PLS (plus) / TPL (T-Mobile) to XEO, and i get TPH For portugal.
Or meybe ishanmu and tiborprogmed way is working to have clear XEO with LTE icon?
Hi i want to change CSC for my S9+ G965F/DS
My actual CSC is CAC/CAC CAC/PHN
CSC : G965FOXM2BRJ3
I tried to flash combination rom with odin but it failed
download odin 3.13.1., i've attached it below
extract it and run odin.exe as administrator
download the rom you want from sammobile
use HOME_CSC if you want to keep your files, otherwise flash the second CSC file
i think this should work
You will need sim card from country to wich one you wolud like to change CSC. OXM is universal multi CSC,and when you put that sim from that country it will ask you to restart phone and after that just do a factory reset and csc will be changed.Its only way without playing with combination files.Sorry for my english.
addy18 said:
You will need sim card from country to wich one you wolud like to change CSC. OXM is universal multi CSC,and when you put that sim from that country it will ask you to restart phone and after that just do a factory reset and csc will be changed.Its only way without playing with combination files.Sorry for my english.
Click to expand...
Click to collapse
This is pretty much the only way to do it now with the OXM multi-CSC.
Tried with UK sim but phone doesn't tell me to reboot or anything, i have the same CSC
Hi, I'm trying to change my CSC to XME (Malaysia). I downloaded the files using Frija. After flashing, my phone's CSC is now XXV (Vietnam) instead.
`XXV/XXV,XXV/EUY".
Note that I am unrooted and I'm trying to change the CSC region by using official firmware so I can still keep my Knox and warranty intact.
Wondering where did I do wrong? Help is greatly appreciated.
Update:
I've managed to change my CSC for Android 12.
When you flash a multi CSC firmware, it seems to be defaulting to a CSC which in my case, is the Vietnam XXV CSC.
I found a free tool that could change the CSC called SamFw FRP Tool 2.5
All I need to do is flash it with Odin again and when the initial setup screen shows up, go into an emergency call and type in *#0*# which will take you into the test mode.
After that, use the tool to change CSC with the tool then complete the rest of the setup on your phone.
P/s: Samsung Pay does not seem to work. When I add a card, it says invalid information when authenticating with the bank.
Hopefully the FRP tool is from a reliable source. The error message could mean the opposite. Normally the CSC from multi region is selected by the SIM cards country. Did you have 2x Malaysia inserted on first boot after flashing? Also there are dialer codes that bring up a menu to select a specific region, I think best chances are with Google phone app. You would need to search for these codes for your device.
Samsung Pay in german, CSC is EUX fix, 5 minutes
Hello This also works with most Samsung phones If anyone is struggling with Samsung pay being in German and has the csc being EUX, I know how to solve the issue and it only takes about 5 minutes. Basically the csc is set to EUX, which is the new European standard, but for some reason, Samsung...
eu.community.samsung.com
Another update, Samsung Pay works after I register with another bank. It was the old bank's fault. Not the phone or CSC region change. The CSC region change worked for Samsung Pay as well from the very begining.
Samkey for changing CSC