Related
This is a more detailed edited version of how to install the Resurrection ROM by westcrip...
as have seen too many users that seem to be skipping parts or confused of the installation.
This is also for users like myself, who just started on this site and can't post on Development side to find their answers.
BACKUP your apps of course...but DO NOT backup system data.Repeat!! DO NOT BACKUP SYSTEM DATA. Restoring system data can give you some problems because if you don't know what you're doing, can accidentally replace something from the fixes that screws things up!
-----------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
PART-1
Rom Installation (you MUST follow these steps! )
**Go to recovery mode( Vol UP + Power+ Home and hold until the Samsung Galaxy screen comes on)
1- Wipe data / Factory reset then (can Wipe cache partition or go straight to)
Install ResurrectionV1.1_official_remix_ics_4.0.3_XXLPE_FULL-WiPE.zip
*if you did not Wipe cache, can go straight to install from cache...
but if you Wiped cache then you go to install from external SD card and install 1.0_CWM.zip (this will be touch version)...
then choose - install zip from sdcard. - choose zip from sdcard. Scroll down to Download folder and select ResurrectionV1.1_official_remix_ics_4.0.3_XXLPE_FULL-WiPE.zip.
Please wait a moment.
2-Install gapps_for_remix_v1.1.zip
3-Install gapps_fixer.zip then go back and go to Advanced.
4-Wipe dalvik cache (required)
and Fix permissions and go back to
5-Reboot system
(at this stage it may take a while for first bootup, because we have wiped cache. It needs to rebuild it, so don`t panic.
It may take a while *average around 3-5min before getting to Installing applications screen)
At this stage, boot to system and configure the phone (change language settings, etc).
When finished, again reboot into recovery and follow PART-2
PART-2 (required)
This part it's mandatory here are contained the language, theme, AOSP apps and the T9 dialer if you want it...
or use default. ONLY install one of these:
*note: you're in regular CWM using up and down volue + power button to enter.
If you want the touch - reinstall it like before.
1.- Install the SMSfixupdate-afterboot+T9 Dialler.zip
or
SMSfixupdate-afterboot+default remix dialler.zip
go back
2.- Reboot into system
After finishing the boot it's highly probably that you receive a force close from android phone.
It's normal and it's the only FC that you should get.
Enjoy!
**There is a RAM Manager Fix (When you open the Task Manager app, there's a section called RAM and a button to Clear Memory.
The fix enables that button again... for those not working).
Here is a mirror link for this and other files: RAM Manager Fix and others
PART-3 (optional)
*This can apply to many other files you want to flash.
If you want to install Siyah kernel:
Place Siyah-v3.0rc4-CWM.zip (or whichever version you're using) in the root of internal SDcard memory ("download" folder) and go to recovery mode (Vol Up + Power + Home).
Go to Install zip from SDCard... and select it.
Yes and install... Fix permissions... Reboot.
**battery issues with Siyah?
go to recovery
wipe dalvik
go to "kernel specific options" to reset them or other performance tweaks.
reset kernal
fix permission
reboot
**No more video player?
Get the VideoPlayer.apk file (*have to do a search for it now until I find another working link to it)
and copy it to system/app using something like Root Explorer
Reboot
Hope this helps. I'll edit this when I have time (usually busy with other projects).
*Version 1.2 is out now Check it here.
Good job
Tho make sure you spend a bit of time regularly checking the thread (depending on how much action the thread gets, obviously). Once you make threads like these people invariably ask questions & it's best if the person who detailed the method answers most of them.
Thank you sir.
I will give as much time as I can on this, when questions come up... and I'll be sure to keep up with bugs going on on original thread... though they will be updating this ROM soon to 4.0.4.
When that happens, guess will have to update this lol.
(oh no, what have I gotten myself into )
Language problem
Hello!
Thanks for the thread, really useful for noobs needing help to fix some problems.
I am a noob... and I have a problem.
Everything is working fine, battery is ok, no fc... but language seems to be messed up, I get my language (spanish) in almost all settings and menus, but dialer is invariably in english. Some contacts dialogs show this behaviour too.
Thank you very much in advance!
Thanx a lot, really useful...cant wait for 1.2
SMSafter-reboot is the only fix i needed to fix my dialer fcs issue, after a dalvik cache clean and permission fixing. That was the only way, if some1 has same issue.
Sent from my GT-I9100 using XDA
Hi Miguel. The ROM is mostly for English and some language settings are off here and there. Mine too shows Chinese characters in some parts. I think this has to do with where the phone is originally from.
Version 1.2 will be out soon (based on 4.0.4) and should have more bugs fixed. I will see if there's anything can be done to help you with Spanish settings.
*glad it's helpful for you guys.
Thanks for a good simple guide.... it is getting pretty difficult to find answers with so many posts in the main thread.
Will you be making a similar step by step guide for ver 1.2 that should be out soon?
If it is needed I will. Will have to wait for it to come out and see if instructions changed. The process will be easier (after what westcrip said), not needing to add gapps fix, etc now I think.
Anyways, if I think needs more detail for newer users, I'll add a new thread for it and post a link here to it too.
Which dialler
I'm a true noob and I'm rooted with CWM installed and I'm giving serious consideration to this rom. My only question at this point is what are the differences btw the 2 diallers and do most folks prefer one over the other?
Hi tlmacson. It's a very good fast and smooth rom with good support. 1 dialer gives you T9 abilities... which means when you start dialing some number, it shows you contact(s) that much those numbers.
But there are some bugs in it not working for some, so recommended to install the default one and add some other app that does the same, or install T9 on after the default.
PS
If you want to give this ROM a try... the new 1.2 version will be out any moment which should have easier installation with hopefully less bugs ^^
I have been using it for a few weeks now. It has run really smooth, the only bugs are very small and do not effect the use of it daily.
I had a few problems with the dialler, so I installed exDialler. I actually prefer it, it has t9 searching and can be skinned to look like ics dialler.
I will definatly give ver 1.2 of the rom a try too.
Yes, that's the 3rd party app people like for T9 use: exDialer
It also allows you to give it black theme.
HELP!
Cyber i'm wondering if you did test the 1.2 PRO resurrection I want to upgrade to it but i don't know if it is a FULL WIPE or not because westscript didn't mention it also there are no GAPPS and FIXER within the thread can you please confirm for me this?
I think that I may just do that since I'm not having any real issues with the leaked "stock" XXLPQ. I appreciate your advice and dialer explanation.
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Test
Thank you cyberboob.
I will try 1.2 and see how it goes, anyway I will install exDialer to fix my languages "problems" (it is not a dealbreaker but is disturbing seeing some dalogues in other language).
According to 1.2 changelog this version is promising.
cyberboob said:
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Click to expand...
Click to collapse
thank you. i'll try without the wipes
Sorry.. a full wipe is needed again (or more bugs will be present).
Follow these steps:
Do a full wipe(factory reset+cache+dalvik cache)
Install the Main ROM
Install Siyah-v3.0.1-CWM.zip
Reboot
Do the initial setup of things
Go back to CWM and install navigation button fix
Reboot
Then go back to CWM and install app themes (there are some bugs, but if you want the black themes, then install classic first, then black)
Reboot
Some people have other issues after, but see how this goes.
I would change the DPI settings to 184 or 210 for everything to work fine from market apps.
*Also westcrip will post a new fix update for some new bugs reported by some users.
cyberboob said:
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Click to expand...
Click to collapse
I know I'm showing my "noobness" but I thought that the kernel was part of the ROM; so how do I install the kernel after the ROM?
Same way you installed the main ROM.. go into recovery mode and select the folder you placed it in (usually internal sd card "download" folder) and flash it "yes". Fix permissions if want and reboot. Same with anything else you need to flash/CWM after/before.
Another.... One.
AOSP ROM for Lenovo P780
Original Link:
http://4pda.ru/forum/index.php?showtopic=475747&st=8260#entry29011125
Miror:
https://drive.google.com/folderview?id=0B2ORIgaV4iacZTdKSXVyYXBWVlU&usp=sharing
Instructions:
China ROM Vibex installed;
Copy the ARCHIVE:AOSP 4.4.2 v.1.8.zip on phone memory or SD;
Restart in Recovery(TWRP or CWM)
Install the ARCHIVE:AOSP 4.4.2 v.1.8.zip from Recovery and then Wipe Data,Cache, Dalvik Cache,etc,etc;
Restart the phone.
WARRNING: ROW AOSP DEVELOPMENT HAS STOP. THIS ARE THE LAST ARCHIVES FOR ROW ROM
ROW ROM rooted from satanduk post installed;
Copy the ARCHIVES:AOSP 4.2.2 ROW V1.3, AOSP 4.2.2 V1.4.zip on phone memory or SD;
Restart in Recovery(TWRP or CWM)
Install the ARCHIVES:AOSP 4.2.2 ROW V1.3, AOSP 4.2.2 V1.4.zip from Recovery and then Wipe Data,Cache, Dalvik Cache,etc,etc;
Restart the phone.
V1.8 ONLY FOR CHINA FIRMWARE
-new start animation
-Zoom button in the dialer
-Updated all Google's services, in particular keyboard
-ZipAlign Full
-Added standard live wallpaper
Added Mx-Pro Player
-item in the Startup settings
-install script now vaypaet not date
-Standard oboina of 4.4
V1.7 ONLY FOR CHINA FIRMWARE
-screen Edited outgoing call - thanks mixmax1982
-mode processor upgraded to Ondemand (full, not clipped ) - uniform load on all cores. Power consumption should fall
-Added support init.d
-Updated BusyBox
-Added support for RDS in FM-radio
V1.5
-Fixed crash in live wallpaper
-Camera replaced by Lenovo camera-so now the camera is fully functional and there is no any problem.
-processor operating normally while all active sensors
-Fixed Auto Brightness. Now it works correctly translated app-notes (NoteBook)
Changes in 1.4
-Item Display settings (Used Light Flow)
Pips-density screen, and change the font to Settings-Screen
-CPU management in Settings-For developers
-Fixed phone information to Settings-About phone - Device Information
Changes in 1.3
-Built-in Adobe Flash Player 11 and AdAway (ad blocker)
-Removed some unimportant Google services (You can download from the Market)
-call button on the center -Added ROW version Updated Xposed-Installer -Updated Google services and Superuser VIPER-Updated -Fixed translation errors New bot-logo
Changes in 1.2
Strip-"tails" from Acer. Now Lenovo
-Gravity Box Updated to version 3.0.2
Changes in 1.1
Ganitura-
Vibration-soft keys
, good sound library (old sound sloppy)
-Sensor Calibration
-Returned original SMS. Modified crash.
V52 Modem
Changes in 1.0
-Setting ringtones for each Sim : Blush:
-Advanced menu. For me it's more convenient than a GB -launcher now Nova. As he only has a bunch of stock options , returned to standard camera android -Built into ViperFX -Firmware altered under Chinese markup -In setting the added items Atozagruzki, ViperFX, turn mute on schedule. Added-Noise -Fixed an issue where if you disable one of the SIM icon has not changed -Removed problem where when you press the power button when the phone is locked, soft keys light up , now there is no delay release -Updated all software to the newest versions Made-view stock dialer -Engineering menu in step 180 c Russian language (For enthusiasts ) -Added engineering menu item in the setup developer
Indications:
Customizable display through LightFlow.
1. Run Light Flow, in "Settings" program:
2. "Direct method".
3. Insert "mode Root".
4. "Control LED" -> manage LightFlow
5. Include "Spec. Opportunities" (Settings-> All Settings-> Spets.vozmozhnosti-> Services-> LightFlow -> ON)
6. Set up a "notice" for themselves, not forgetting that we have only the green LED.
Custom Calls and Message Tones How To:
Create a folder on the main memory ringtones and throw back a desired tone. Then go to settings-sound-melody and choose that tune that threw into ringtones (it appears). Voila!
Gravity Box is stable. Nowhere else did not observe such stability.
For magnetic cases apply the patch from recovery without wipe.
Everything you do, you do at your own risk.
And now some screenshots!
I am currently on this rom and it is excellent.
Trimis de pe al meu P780 folosind Tapatalk
am on Vibe 1.5 kitkat, can I straight flash this rom?
btw am using a P780 china 4gb version,
thanks
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
stympy said:
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
thanks, but just want to confirm that its ok to flash the ASOP rom for China 'KIT" rom even is on Vibe1.5 kitkat, don't want to brick the phone,
thanks for anyone who can confirm, thanks
Only one SIM detected
After flashing the ROM, it appears to be detecting only one SIM. I have cleared the possibility defecting SIM card by trying it out in other Mobiles. Is it that I have to again rewrite the IMEI codes from the back up using Mobile uncle? Super camera and super gallery are not thare should we get the apk and install?
Hi, am on Chinese Firmware 4gb with Vibe 1.5 Kitkat, want to go bloat free, which rom would you recommend? AOSP or SLX? why?
willl I lose IMEI if switching from Chinese to ROW? thanks
DON2003 said:
Hi, am on Chinese Firmware 4gb with Vibe 1.5 Kitkat, want to go bloat free, which rom would you recommend? AOSP or SLX? why?
willl I lose IMEI if switching from Chinese to ROW? thanks
Click to expand...
Click to collapse
SLX sxeems to be better ! I use LiFe v.0.7. For me is the best.
Sorry stympy i dont read this thread, once again sorry my friend
btw, stympy how must i doing when from this rom -> http://goo.gl/oAAKPU ???
thanks before
Excellent ROM, in v1.6 is more stable and faster. I flashed after full wipes. The only problem, is some animations with some lag and Quick and extra settings with GravityBox not works fine, but this is problem cause for compatibility of MTK and kitkat.
But Lenovo released the Vibe UI from ROW versions, I will expect ROW AOSP versions and repartition tool from India forums. The best ROMs actually are, SLXROM (by Silentxxx) and AOSP versions (by power19), from Russian Lenovo forum and 4pda forum respectelly.
Flashtool version
Any one have a backup this rom with mtkdroid tool & make flashtool version??.
haahaaah said:
Any one have a backup this rom with mtkdroid tool & make flashtool version??.
Click to expand...
Click to collapse
Better you install or follow the thread at needrom discussion of p780 and follow the step by step tutorial. You don't need flashtool except for installing chinese version of p780 firmware prior to this aosp rom.
stympy said:
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
I have v1.7 , is there any way to upgrade to v1.8 without losing or restoring the entire data from scratch ?
Also, is there any way to skip the data to be installed in SD card because for the security reason I am looking for an option which could install all the apps in phone internal memory instead of SD card because SD card can be removed and data can be accessed anytime if the phone is lost.
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I just flashed v1.8 and then wiped dalvik cache and thats it. I am on v1.8 and I must say BOOT ANIMATION plus STARTUP ITEMS is a charm.
My tests and solutions on the AOSP 1.8:
- The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
- StandardCamera.zip it's SnapCamera. So I intalled the Google Camera from Plays Store and tested HDR, that doesn't work. PHOTOSPHERE and LENS BLUR works. Gallery Crashes while trying to edit a picture.
- Google launcher.zip works but overwrite nova prime. Titanium backup is recomanded.
- Gravity Box is stable, but a lot of tweaks are not applied.
Here there are my steps for the INSTALLATION and to solve the ISSUE ABOUT GOOGLE ACCOUNTS :
- I installed Vibe UI with Flashtools, just booted to check it then I rebooted in recovery. I didn't put any google account on it.
- From recovery I installed the AOSP 1.8 4.4.2
- At the first boot I get this 2 messages: "Unfortunately, the process android.process.media has stopped" "Unfortunately, the process com.android.systemui has stopped" and I can't go on seting up the phone.
- Back in recovery tried a wipe to factory settings, it works, so I enter in the O.S.
Then
- Once in the O.S. I cant get to login in my Google Accounts, I get "there was a problem communicating with Google Servers"
- Back in recovery tried another wipe to factory settings, it DOES NOT works.
- From recovery I flashed again AOSP 1.8 over the AOSP 1.8, it DOES NOT works.
- Downloaded the GApps_Light_4.4.2_signed.zip, it DOES NOT works.
- So i was tired, and I installed from recovery SLX v26a CHINA.
- In SLX v26 I tried to log in with Google Play, and I logged in with success.
- Back in recovery I flashed again AOSP 1.8 over the SLX v26 china.
- Booting the AOSP 1.8, Google Play icon and files exist, but in SETTINGS->ACCOUNT there is no option to put a Google Account (only standard EMAIL ICON) and if you try adding it from Google Play, it crashes.
- Again, back in recovery, I Installed again GApps_Light_4.4.2_signed.zip
- Still in recovery, I tried a Wipe to Factory
- Back in the O.S. I tried to add an account in Settings->Accounts, and finally it works.
I found GApps_Light_4.4.2_signed.zip on XDA but i cant remember the address of the discussion. Mine was of size of 47.4 MB not the one of 50 MB, the second ones gave me an error in recovery.
Here there is the file from my GDrive: https://drive.google.com/file/d/0BwGOPBqfPRJXUzJvc0JOT2NfYlU/edit?usp=sharing
DIALER
After installation I found a DIALER with russian alphabet.
The solution is HERE:
XDA: [Port] [APK] KitKat Google Caller ID Dialer - xda-developers
More about Google caller id https://plus.google.com/photos/+andr...70061497141729
Download: http://forum.xda-developers.com/attachment.php?attachmentid=2413224&d=1385365522
At the end I have 2 dialer, one with russian alphabetand the second one by google with Caller ID funcion.
-
-
UPDATE: I just noticed that the screen remains ON while you are in a conversation with BLUETOOTH erarpiece. The proximity sensor and the SCREEN TIME OUT doen't work during the calls with bluetooth, screen remains ON
What works:
Tethering
Car Mode.
PHOTOSPHERE
LENS BLUR
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
What doent' works:
The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
UPDATE: I just noticed that the screen remains ON while you are in a conversation with BLUETOOTH erarpiece. The proximity sensor and the SCREEN TIME OUT doen't work during the calls with bluetooth, screen remains ON
HDR
Gallery crashes while trying to edit a picture.
A lot of Gravity box Tweaks doesn't works
Lenovo Power Centers 1.3 and 2.5
STRANGE BATTERY BEHAVIOUR
The very first day I put the phone in AIRPLANE MODE with 35% at 00.00.
At 06.00 the battery was at 32%. Usually with other roms there is no such consumption of energy, with no variation of percentage displayed.
Around 8 it starts with a drammatic dropdown of enery, quicly decreasing from 30% to 11%, as in the screen.
This behaviour never happen again.
54d7d1ef
The second day, after a full charge, I installed a System App and rebboted the phone. After reboot from 100% I get 76 % of battery indication, with a "hole" in the battery graph and stats. I rebooted again and the indicator displayed 99%.
This behaviour never happen again.
--update--
Tonight I put my phone in ariplane mode at 50% of charge. This morning I found the battery at 41%. I was quite sure that were no apps using GPS, but from the following screen it seems that GPS was turned ON all nigth long.
Does airplane mode should turn off ALL the signals? Why GPS remain ON?
-end of update--
Lenovo Power centers
All the Power Centers that I had from my backups doesn't works, they crash at boot, or doesn't install at all.
Lenovo Power version 1.3. - Installed, works in background, GUI crash opening it.
Lenovo Power Version 2.5. from ROW s116.- Installed, doesn't works in background, GUI crash opening it.
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
Dagon84 said:
My test and solution on the AOSP 1.8:
- StandardCamera.zip it's SnapCamera. HDR doesn't work. PHOTOSPHERE and LENS BLUR works. Gallery Crashes while trying to edit a picture.
- Google launcher.zip works but overwrite nova prime. Titanium backuop is recomanded.
- Gravity Box is stable, but a lot of tweaks ar not applied.
- The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
DIALER
After installation I found a DIALER with russian characters.
The solution is HERE:
XDA: [Port] [APK] KitKat Google Caller ID Dialer - xda-developers
More about Google caller id https://plus.google.com/photos/+andr...70061497141729
Download: http://forum.xda-developers.com/attachment.php?attachmentid=2413224&d=1385365522
At the end i have 2 dialer, one with russian character and the second one by google with Caller ID funcion.
-
-
What works:
Tethering
Car Mode.
PHOTOSPHERE
LENS BLUR
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
What doent' works:
The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
HDR
Gallery crashes while trying to edit a picture.
A lot of Gravity box Tweaks doesn't works
Lenovo Power Centers 1.3 and 2.5
STRANGE BATTERY BEHAVIOUR
The very first day I put the phone in AEROPLANE MODE with 35% at 00.00.
At 06.00 the battery was at 32%. Usually with other roms there is no such consumption of energy, with no variation of percentage displayed.
Around 8 it starts with a drammatic dropdown of enery, quicly decreasing from 30% to 11%, as in the screen.
This behaviour never happen again.
54d7d1ef
The second day, after a full charge, I installed a System App and rebboted the phone. After reboot from 100% I get 76 % of battery indication, with a "hole" in the battery graph and stats. I rebooted again and the indicator displayed 99%.
This behaviour never happen again.
Lenovo Power centers
All the Power Centers that I had from my backups doesn't works, they crash at boot, or doesn't install at all.
Lenovo Power version 1.3. - Installed, works in background, GUI crash opening it.
Lenovo Power Version 2.5. from ROW s116.- Installed, doesn't works in background, GUI crash opening it.
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
Click to expand...
Click to collapse
Thanks for this best review.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Q: How to Change Modem?
How to change modem version in this ROM?
with default modem from v1.8, one of my SIM not have signal. I tried to install different modem from another post from recovery but still no signal. I did the same method for another ROM (SLX 26 CN/KIT) and it worked.
Tried to installed another Android 4.4.2 (vibe), have the same problem, and still can not change the modem
Any one can help?
momothecat said:
How to change modem version in this ROM?
Click to expand...
Click to collapse
the modem-file in this Rom is:
modem_1_3g_n.img
that file must be replaced with root explorer par example, but don't forget to set the same permissions than before.
For me the baseband v101 works fine.
EDIT:
Maybe you need to replace both modem files. I did it first with modem.img, but there was no effect und then I replaced modem_1_3g_n.img.
naish8.5 said:
the modem-file in this Rom is:
modem_1_3g_n.img
that file must be replaced with root explorer par example, but don't forget to set the same permissions than before.
For me the baseband v101 works fine.
EDIT:
Maybe you need to replace both modem files. I did it first with modem.img, but there was no effect und then I replaced modem_1_3g_n.img.
Click to expand...
Click to collapse
Yes you are right. The files must be replaced together.
stympy said:
Yes you are right. The files must be replaced together.
Click to expand...
Click to collapse
Hi, what do you mean that BOTH FILES MUST BE REPLEACED?
In etc/firmware I have only one file called modem_1_3g_n.img, there is nothing more.
It's another modem in another folder?
Dagon84 said:
Hi, what do you mean that BOTH FILES MUST BE REPLEACED?
In etc/firmware I have only one file called modem_1_3g_n.img, there is nothing more.
It's another modem in another folder?
Click to expand...
Click to collapse
Hi. You must look in /system/etc/firmware and /system/etc/mddb. This are the 2 directories or folders you must use.
Example:
In:/system/etc/firmware you will find the file called: modem.img
In:/system/etc/mddb you will find the file called: BPLGUInfoCustomAppSrcP_MT6589_S00_P780_V23
Do you understand now?
Look in my post:
http://forum.xda-developers.com/lenovo-p780/development/how-modems-t2757923
There you will find a bunch of modems to patch from TWRP.
First backup your modem files then HAPPY PATCHING.
My first attempt at ROM cooking, a (relatively) lightweight ROM based on the stock Samsung Touchwiz ROM but with most of the Samsung apps removed and/or replaced with either stock or 3rd party apps.
Still under development. Current release: 1.0
Features:
-Mini launcher (stock-like look but reasonably fast)
-Google keyboard
-Cyanogenmod mms app
-NiLS notifications
-Gravitybox transparent notification bar
-Screenshot option in power menu
-StatusbarVolume
-Dialer2 and fastcontacts as default dialer and contacts app. (Super fast but very limited. Stock Samsung apps included)
-(more to come in the future)
Installation procedure:
1. wipe data/cache
2. flash otonrom.zip (takes a while)
3. reboot (first boot takes longer than usual)
4. get through setup wizard. The only importand thing here is that you connect to wifi, you can do everything else later. (I'm thinking of removing the wizard entirely)
5. When asked, choose the Mini launcher. Touchwiz is only required on first boot for the lock screen and home button to work. You can remove it later with the Uninstall app.
6. go into the app drawer and open the xposed installer. Go into the framework menu and click on install/update. Grant superuser permission, then click cancel when asked to reboot.
7. go into the modules menu of the xposed installer and check all three modules. Now power off the device and boot into CWM
8. flash update_otonrom.zip. It will reboot automatically.
9. unlock the device and wait a bit. Grant superuser permission to Titanium backup. Wait for it to restore data. This is needed for restoring the settings of Xposed modules (I'm sure there's a better way to do this but this works so whatever. Might change it in the future)
10. The device will reboot. Once it loads up everything, reboot it again just to be safe.
11. To get rid of that annoying 'set up software update' notification, just click on it and click 'later'.
12. Open NILS, a great notification app, and set it up. You can remove if you want to, though.
13. That's it. Check if everything is working and please report any bugs. The default applications for dialing and contacts are dialer2 and fastcontacts, but the stock dialer and contacts are included.
Known bugs:
-After unplugging the charger, the battery indicator sometimes either stops working completely or just stops displaying the battery percentage. C̶h̶a̶n̶g̶i̶n̶g̶ ̶t̶h̶e̶ ̶b̶a̶t̶t̶e̶r̶y̶ ̶i̶n̶d̶i̶c̶a̶t̶o̶r̶ ̶i̶n̶ ̶G̶r̶a̶v̶i̶t̶y̶b̶o̶x̶ ̶t̶o̶ ̶s̶o̶m̶e̶t̶h̶i̶n̶g̶ ̶e̶l̶s̶e̶ ̶a̶n̶d̶ ̶t̶h̶e̶n̶ ̶b̶a̶c̶k̶ ̶s̶e̶e̶m̶s̶ ̶t̶o̶ ̶f̶i̶x̶ ̶i̶t̶.̶ ̶ (UPDATE: It appears to be incapable of displaying 100%. Once the battery level drops to 99% it should start displaying it properly.)
-sending an mms crashes the messaging app. sms works fine. haven't tried if recieving an mms works (UPDATE: It doesn't)
-(probably a lot more. You tell me)
Future plans:
-do something with those ugly green quick toggles
-remove even more unnecessary apps (It's still pretty cluttered)
-simplify installation process
-(you tell me)
Downloads:
otonrom.zip:
http://www.filedropper.com/otonrom11
update_otonrom.zip: see attachments
Screenshots: see attachments
reserved
Oh, I forgot. Any version of CWM should work, but just to make sure, this is the one that works for me. (see attachment)
Hi,
I would like to try out your ROM, but the filedropper-link is broken.
Can you help me out?
biopoit
Well thank you.
Hi, I would like to try out this ROM, but the download link is broken.
Can someone reupload this ROM and give link?
Thanks.
Hi,
I have some really strange App crashes since a few weeks: Google Photos won't run, an app from my carrier (MeinVodafone) and Google Search. The strangest thing is that Google Search is working...partially. I can not open the app directly, but I can open it via voice (timer etc is working and search also has no problems) and I can open the settings in Google Settings (Play Services). Attached are some catlog logs.
I'm running ParanoidAndroid 5.1 (5.1.1) on an d802. Build is from 1st june.
I'm also running XPosed Framework. I already thougt that WebViewGoogle could be the cause for that, but that would affect more apps and I haven't found any hint on that in the logs.
Any tips what could cause these strange crashes?
UPDATE: I just changed my system language to english (from German) and at least Photos is running without problems...
I have 3 possible solutions..
1. Reinstall apps
2. Wipe /data, /cache from recovery
3. Reinstall the rom or choose another rom.
Third should work but idk if you want that.
I already reinstalled them and I'm already running the second or third update. I'll try it with wiping /cache and /dalvik-cache, /data would delete all apps
Ok please update the thread with news
It looks like I cannot wipe /cache, it says done but shows the old "E: cannot mount storage" and then I stuck on boot animation for over 15 minutes, way longer than normal. Repair it also doesn't help that.
I know I can delete dalvik-cache by deleting the files in /data/dalvik-cache/arm. Is there a way for cache too? That would be the only way to do that
@Artim_96 yes there is a way but I think its pointless. Try flashing stock rom or any other non-lollipop rom and then return to lollipop.
I don't think that's the only possible solution. I'm on PA since January, the bug with Google Search and MeinVodafone is only since a few weeks.
It surely isn't only possible solution but it is recommended.
it is pointless to flash a KK ROM, restore the apps, install an LP ROM and restore the apps again. It just makes no sense to do so.
I never said to restore apps, wipe everything (system,data,cache) and flash rom and gapps.
So you want me to reinstall everything, right? Are you kidding me? And what should I use? A blank system just with Google Apps?
I now got search to work again, the problem was the XPosed Module "Force Immersive mode", the other app is still not working, so I made another log with all modules disabled.
But I found another bug: the location service seems to be not working properly: no app that should be shown is there and Google Fit was not working today. (I never really use it, so I just saw that and because Fit was draining the battery to much I just reinstalled it to test it)
Hi guys,
I've developed my personal custom rom. Italian people can read this article instead of this one.
These are all the features (I hope to remember all of them ) :
- based on CherrugKernel
- OTA updates for rom and kernel too
- Removed all chinese stuffs
- Gapps included
- Rooted with magisk 16.0
- Build.prop tweaks
- Increased volume step to 45
- Added support to su.d
- Better doze
- Better ram managment by crok
- Camera API 2 enabled
- Ads block integrated
- Face unlock support
- Google lens enabled
- Bigger space for Google photos' drive
- Developer options pre-activated
- Removed some futile voices in settings
- Removed some unused lib
- Busybox included
Tips:
1) For any problem with notifications open the dialer and call *#*#46360000#*#*. Disable the last voice of menu that will appears. Go to Settings.apk -> Battery -> Smart battery for apps and select all the apps of wich you want to receive notification. Now come back and select Align Wake-up and disable Align Wake-up voice. Now come back to the first Settings.apk page and select Permissions. Go to "You have allowed x apps to auto launch" voice and choose the same apps you have choose in smart battery menu. Done
2) Choose USA region to remove yellowpage's tab in phone and contacts and allow icons in notifications.
3) To enable Face recognition go to Settings.apk -> Security centre and set a screen lock. Now go to Smart Lock, insert your pattern/code/password and choose Trusted face then SET-UP, NEXT and memorize your face. To better unlock your phone memorize your face in different light's conditions.
4) For problem with camera go in camera's settings, scroll down to Use Camera2 API and enable it.
5) To pass CTS Profile in Magisk boot one time then use the universalsafetynetfix in download.
6) If u have problem with OTA updater clear app's download history, force close it, clear app's data and then reopen it.
The rom has been tested on my x829 6/128Gb and a x820 6/64Gb too. I granted that it's stable but I'm not responsible for any problems to your phone. Flash at your own risk.
How to install?
I advice to do a complete clean install. To do this go to twrp -> wipe -> advanced wipe -> select cache,dalvik,system,data and internal storage. First time I do also format data but isn't necessary. Now go to Advanced -> Adb sideload and check all the voices. Download rom's zip on pc. Now go to adb and fastboot drivers' folder and click right mouse's button + shift on an empty part of the folder. Choose open command line here or something like that from showed menu. Now write adb sideload and drag rom's zip on the window. For Windows 10 put ./ before adb command. On the phone do swipe. Wait some seconds and push enter on pc. If you're italian and want to install by conventional mode check this.
Andoidfilehost mirror
Andoidfilehost mirror NoGapps' Rom Alpha
This is a version without Gapps. I replace Google package installer with stock one, root browser with es file explorer, removed Truecaller and put in Opera Touch to allow u download your prefered apk. Maybe Pi Music Player will crash due Google play services dependence. I called it Alpha because I don't have tested it yet, let me know for any problem.
Telegram group
If you could join the group and partecipate to future update for the rom with your feedback, your advice, sharing logs, screen shoots the entire community will thanks u. :good:
CherrugRom, ROM for the LeEco Le Max 2
Contributors
- CherrugDeveloper
- @Lucchetto00, to help me with kernel and some stuffs
- CornFlaix, for the logo
- @arielaco, for the great help for toggles and so on
- @mauronofrio, for universalsafetynetfix
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Current Beta Version: v1.0
Beta Release Date: 2018-05-30
Created 2018-05-30
Last Updated 2018-05-30
Thanks for tour ROM. It is based on EUi5
Enviado desde mi LEX820 mediante Tapatalk
yes it is based on eui 5.9.028s
AFH link not correct is this one
https://androidfilehost.com/?fid=818222786056033733
i install this rom
fast
ram managment is good
Camera good
ringing volume clear and loud
fingerprint is good
face unlock not working FC
battery draining fast
slow internet
4g/volte unstable
Thnax for this Rom keep doing best things
Best of luck bro:good:
face unlock FC
Can you download matlog and send me the error please? Do u have done a clean installation?
CherrugDeveloper said:
Can you download matlog and send me the error please? Do u have done a clean installation?
Click to expand...
Click to collapse
yup clean install.. how get matlog?
From the store. Is an app which show you logcat. Grant superuser permission and set errors only, after that run face unlock and send me the log.
Link works for me and there are 25 downloads so for the others too
CherrugDeveloper said:
From the store. Is an app which show you logcat. Grant superuser permission and set errors only, after that run face unlock and send me the log.
Click to expand...
Click to collapse
I get this file bro... hope so is it right?
please made telegrame group for discussion
Great idea I forget to do it ahahahah I'm so busy today and tomorrow too
The log is strange I don't know if you have pick it right way but it seems to be a libs' error. First try do delete data to facelock app and after reboot in recovery and wipe cache and dalvik. Try again and let us know. Thank you for your time
CherrugDeveloper said:
The log is strange I don't know if you have pick it right way but it seems to be a libs' error. First try do delete data to facelock app and after reboot in recovery and wipe cache and dalvik. Try again and let us know. Thank you for your time
Click to expand...
Click to collapse
sorry bro not working
fromjeet said:
sorry bro not working
Click to expand...
Click to collapse
I will try to make a zip for you maybe tomorrow. I added telegram group's link on thread.
Can u also look if smart locks are activated under security center -> other security options -> trusted agents?
I've uploaded an OTA update for kernel. I hope new profiles will drain less battery. Waiting yours feedbacks
CherrugDeveloper said:
I've uploaded an OTA update for kernel. I hope new profiles will drain less battery. Waiting yours feedbacks
Click to expand...
Click to collapse
Ok I will try
fromjeet said:
Ok I will try
Click to expand...
Click to collapse
Jeet have u verified smart agents?