Hello. I bought phone Samsung Galaxy s4 copy but i don't know the real model of it. I try to run it but its only blue light clicks on the up of phone. When i try to run it on cwm recorvery by clicking vol up + power cwm runs but its turning off with 5 max 10 seconds and then the phone turn off. Its CWM-based Recorvery v.6.0.2.8 (compiled by Bruno Martins) and when i have the 10 seconds i search phone for some rom and i see there smart-stayV9-deodexed.zip its HDC rom i see on google but meabe someone want flash that rom on this phone and its now bricked. What to do now, how to give it android life again please help me. On the back of phone without battery i see this:
SAMSUNG LOGO MOBILE PHONE
MODEL: GT-I9500
FCC ID: A3LGTI9500
SSN:-I9500GSMH
RATED:3.8V===; 1300mA
MADE IN KOREA BY SAMSUNG
IMEI: 355236030125604
THE LINE CODE
S/N:R21D482HDDA
Thanks for any answers, and sorry for my english language
Related
My Galaxy Note SHV-e160S Korean version wont turn on no samsung logo, no vibration no nothing. Nothing shows up even if i connect it with the PC. I tried to install CWM Recovery and it happened. Please help me on what i should do. I do not have Samsung Warranty as i bought it second hand and i dont know what i should do now ((( Please help me! I will really appreciate it!
Make sure you fully charge it (four hours) using the stock cable and wall charger.
Will the device go into download mode ?
If so...simply push the file to the device again using odin...
If you are unable to get into the download mode screen.....then the device may need a JTAG repair.
You may also be able to emergency restore using Kies..........g
I have the same problem. Same model unit. It just shutdown and no power at all. Fully charged battery.
Sounds like either the battery went kaput, or the phone itself.
ok, so i used this to tweak my build.prop -> http://forum.xda-developers.com/showthread.php?t=1709836
I saved a original build.prop on my sdcard just in case...
I only changed the build.prop with that guide(changed or added properties)
I rebooted the phone after i finished those tweaks, and after the logo screen the display shutsdown, it has the battery charging gif running. if i press longer to power on, it gives me the logo and then dark..
Is there anyway i can replace the twaked build.prop with my original build.prop ?
//edit: if i remove the sdcard and usb, it freezes with the logo on.
anyone ?
it doesn't recognize my device on recovery mode... i'm trying to pull the build.prop through adb
I have a sgh-i747 galaxy s3 at & t and I'm using it in mexico with telcel ... aokp had the rom and switch to omega v37 was installed and then reboot and stay lit longer dead .. I could help?
s3 clone dead
Hello, I have a phone model e1901 V77 jbl1 9p017 e1901 mtk dual core 1.0 ghz 6577
Chinese android 4.1.1
known as s3.
I install a rom (preloader_e1911_v77_ht_6628_s3_9p017) and the phone will not turn over, nor is it recognized by the computer. I have all drivers mtk and flash tools.
would otherwise install the original rom device?
thank you
(I apologize for the text, but I am Brazilian and I do not speak english)
Hello all, I need help to solve my phone problem. I'm from Malaysia and this is a local brand phone called Ninetology Black Pearl 2.
I'll give you guys the link about the phone and it might can help me to solve the problem:
Phone Full Spec and the phone official Website.
Situation:
I was surfing the internet and the phone suddenly freeze. I thought i just a normal lag, but i waited too long and pulled out the battery. Reattached battery and try to switch it on, but there's only a logo appeared and it off and on over and over again. I've tried to go to recovery but failed! I totally need some expert advise how to revive my phone. Thank you in advance.
Video of the phone : Ninetology Black Pearl 2
This is what happened to the phone: Bootloop
I've tried:
1. Reflash stock ROM - Failed!
2. Enter Recovery mode - Failed!
Help needed, thank you.
Hello.
I am new to xda so sorry if i posted this thread in wrong place.
I don't live in US and i am sorry if i made any grammar mistakes .
Yesterday i rooted my phone and i tried to find kit kat rom for my device. I had no luck but i found "solution" i decided to install kit kat UI. Then every time i pressed home button android asked me which launcher i want to use. That annoyed me so i decided to UNINSTALL old (stock) launcher via app called APK master. Everything worked fine untill i installed new boot animation. After reboot my phone is in infinite boot animation loop. Please help me!
Some info:
Model: Quadro sq 50e85f(SOWA 8880) Chinese clone of samsung galaxy s4.
Manufacturer: alps
Android OS: 4.2.2(Jelly Bean)
Processor: MTK A7 Dual core(6579 i guess but i am not 100% sure)
RAM: 512 MB
And yeah i have 2 backups but that is useless because after root my recovery can wipe data/factory reset and it can't restore backups. I mean it can but after that everything is same!
I also can access meta mode :-/
Please help me!
Specs: I have a Samsung Galaxy s3 phone from AT&T
*Model: SGH-I747
*Purple/Blue Version
*AT&T Version
What I have done:
*I rooted my phone today then tried to install Android Revolution HD ROM due to the terrible battery life of my phone ( would die after a few hours when the phone was locked and inactive!)
*Phone won't turn on.
*There is no logo boot
*Can't go into recovery mode
*LED only comes on when battery is out. Still won't turn on.
I saw this video for the SGH-I747M that could recover Hard Bricked is there one for my version?
I cannot post a link apparently so I will have to say later in the post