Any particular tempered glass screen protector on ebay better than another? Thanks
I had skinomi tempered glass, it was awesome, very good against fingerprints
Thanks. Was it easy to apply without bubbles?
Every glass screen protector is easy to apply without bubbles. I've tried 5 different ones.
Carefully place it down, align it with something, i used a small screwdriver, then just push it down in the middle with your finger.
The only tricky part is to clean your screen good before applying. Any so small dust particle will be seen if not removed.
Sent from my N9005
Spigen and iloome is good :thumbup:
Xtremeguard spartan is what I have and can't complain. Coupon is 90off1 for 90% discount
recDNA said:
Thanks. Was it easy to apply without bubbles?
Click to expand...
Click to collapse
Yes, no bubbles at all
I have the spigen 9H tempered glass protector and it's awesome, no finger-steps, no scratches, zero bubbles, ultra resistant and it's work great ( no lag ) with the note's pen! You have lots of review at youtube.
Only have a negative point, the price, but it's ok, it's only one time you buy them
I've used 2 tech armor glass protectors on different phones, both worked perfectly.
http://www.ebay.com/itm/111225255839?_trksid=p2059210.m2749.l2648&ssPageName=STRK:MEBIDX:IT
Been using one of these for about ten months. The anti finger print was still good. There were some tiny scratches, but only seen at the right angle and the right lightning (but only when the screen was turned off !)
But i work in a forging factory, so that was expected, because of the steel dust. And i use my phone 24/7.
I even dropped it two times face down from my hand while standing. There was just a dent on the plastic rim of the phone.
So in my experience a very very good protector for a small price. And you get all you need for the installation, even a nice home button sticker.
I bought two more, just for the sake of it.
Nillkin H tempered glass, or if you want 2.5D rounded edges glass like the note 4 then Nillkin H+
I'm using the normal H (not 2.5D) and it's amazing. It actually feels better than original glass, very soft touch + no scratches so far.
I'm recommending.
Related
What is the best (quality and cost) tempered glass screen protector for the G3? I previously had an M8 and bought my first ever tempered glass screen protector, Zagg Glass. It was fantastic, looked and felt like there was nothing there and the application process took 20 seconds. However, I'm sure there are other ones out there that are just as good quality wise but far less expensive. Thanks.
I use this one myself and like it a lot. Nice fit, ultra thin, rounded edges, crystal clear and a 9 hardness. Very satisfied with this one.
Orzly
Just perfect
I use one by Pthink. 9H hardness, very clear, and very very smooth coating which does not leave fingerprints or oil! very satisfied with this purchase and was around $12 on amazon. I prefer this one due to the cutouts up top.
Can you please use the long thread already dedicated to this tooic instead of making a New one please...
Please search before making new threads
Sent from my LG-D851 using XDA Free mobile app
I recommend Bepak H+ have used it on my G3 and HTC M8
My nano.tr was great for about 3 days. Now its coming up in 2 places
I refuse to buy another Spigen Nano t.r after 5 of them with countless issues. Ive had them stop sticking for no reason, crack without ever dropping my phone and the list goes on.
I bought a Mime ghost glass and its a huge improvement. It also only cost 28 with free shipping from their website. Great screen protector especially compared to Spigen.
pic
fullyflaredfred said:
I use one by Pthink. 9H hardness, very clear, and very very smooth coating which does not leave fingerprints or oil! very satisfied with this purchase and was around $12 on amazon. I prefer this one due to the cutouts up top.
Click to expand...
Click to collapse
Any chance you could post a pic, I ordered one and am anxious to see what it looks like exactly.
I use zagg, and it's amazing. I also have the circle wireless case, and the front flap was not affected in any way.
I just got my pThink screen protector in today. It is a perfect fit. Couldn't be happier with the quality and price. I definitely recommend compared to the ones with the big cutout up top...this just has one for the speaker grill and ambient light sensors.
are there any tempered glass screen protector that does not leave any fingerprint behind?
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
If there were I would assume the same layer/technique would be applied on the original Gorilla Glass screen as well.
Some do claim they repel finger prints, that's usually just marketing BS though
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
I've been using a Tech Armor glass screen saver for the last few days and it shows fewer fingerprints than the stock screen. It feels smoother than the regular screen which may have something to do with it. It still gets prints, just not as many and they seem to wipe off easier. Very please with it for $10.
jksigmon said:
I just got my pThink screen protector in today. It is a perfect fit. Couldn't be happier with the quality and price. I definitely recommend compared to the ones with the big cutout up top...this just has one for the speaker grill and ambient light sensors.
Click to expand...
Click to collapse
this looks like it only has a cutout for the speaker grille?
[email protected] said:
this looks like it only has a cutout for the speaker grille?
Click to expand...
Click to collapse
The cutout is for the speaker grill and the proximity sensor etc. It does not have an opening for the front facing camera. I've had it for a few days now and LOVE it. The beveled edge is super smooth on the outside edge and the cutout.
jksigmon said:
The cutout is for the speaker grill and the proximity sensor etc. It does not have an opening for the front facing camera. I've had it for a few days now and LOVE it. The beveled edge is super smooth on the outside edge and the cutout.
Click to expand...
Click to collapse
I bought this protector last night and the slim guard case the other day i think ill be good to go! ill post picutres:good:
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
I bought the one carried in the VZW stores and it really cut down on the fingerprint / smudges - I could really tell the difference. But that protector was .4mm thickness and touch sensitivity became an issue for me. So I bought the .2mm iCarez protector. The thickness was just right, but the oleophobic properties are not as good as the VZW protector.
As always, YMMV.
Based on the reviews in this thread I ordered the pThink protector (Free Prime 2-Day shipping FTMFW).
I can't say enough good stuff about this screen protector. It is available on Amazon for around $11(with free prime shipping if you have it). There are a variety of good tempered glass screen protectors. Most of them simply notch out the top near where the speaker, light sensor and proximity sensor are located. This one has a perfectly aligned oval shaped cutout giving it a much more OEM looking appearance. Like most, the edges are pleasantly rounded.
The package is straight forward, complete with requisite chinglish on the outside. The package is generic, saying it includes a 'homer(sic) button' cover. Which doesn't make sense, and sure enough it doesn't include. Opening it up, you see all of the included materials. Nothing outstanding here other than the actual instructions seem to be in normal English! I didn't look closely but I didn't see any chinglish.
Installation is a breeze but good prep ensures success. I cleaned the screen extensively to remove all traces of oil and dust. Since I am a chemist I used chloroform to degrease the screen. I also used it to degrease my fingers (not something I recommend but it works). Once the screen was clean, I applied the tempered glass screen protector by VERY VERY VERY gently lowering it by its sides. I can't stress the very gently enough. If you do it gentle enough it will rest just above the surface and you can use your fingernail to maneuver the screen protector into perfect position. Then just touch down on the screen and watch the "bubble" of bonding spread across the screen, it just drives the air out. The rigidity of the screen protector results in a perfect bubble-free finish. I couldn't believe how easy it was. Once the screen protector was on, I wiped it down with the included microfiber cloth.
Initial impressions? Damn! It's truly crystal clear, I can't seem to find any visual distortion. Touch feels slightly changed due to the oleophobic surface but its clearly glass and feels like a touchscreen. There is ZERO effect on the touchscreen performance. Also, the oleophobic surface DRAMATICALLY reduces the amount of smudges, it doesn't prevent them but its a huge reduction. I have a few pics of the package before installation. Once I cleaned the screen, I lost my camera (my phone is the camera so I couldn't use it). The edges of the screen protector are within fractions of a mm of the display edges. This is necessary to make installation a little easier and to prevent bubbles. I truly could NOT be happier!
I'm really happy with a Bepak one. Rounded edges, smooth, and feels really great to touch. No scratches at all till now with some rough usage.
Although reading the reviews about the pThink one, I'm going to give that a try when something happens to the current Bepak one.
Most of the screen protecors I have used have been garbage. I hate the peel ones becauase some small piece of dust always seems to get trapped under them. The ones where you use water to stick them are pretty cool, but I haven't found any that are amazing. What I'm looking for is a screen protector that isn't a fingerprint magnent, but also one that is easy to install. Any suggestions?
DroidsEATapples86 said:
Most of the screen protecors I have used have been garbage. I hate the peel ones becauase some small piece of dust always seems to get trapped under them. The ones where you use water to stick them are pretty cool, but I haven't found any that are amazing. What I'm looking for is a screen protector that isn't a fingerprint magnent, but also one that is easy to install. Any suggestions?
Click to expand...
Click to collapse
Have you tried note 3 tempered glass screen protector? They are amazing and easy to apply.
I have a tempered glass screen that I haven't put on yet. They sound good, but I'm worried about two things: the screen being a fingerprint and smudge magnet and if a case would be able to go over the phone with a tempered glass screen.
I have one that I haven't used yet because I am worried about a few things:
Will it attract fingerprints and smudges and will a case be able to fit the phone with that particular screen protector?
I can highly recommend the Nillkin 9H tempered screen protector. It costs around ₹800 here in my country (so should be around 12-13 USD/10 EURO) and it is an extreme value for money product. I really love mine.
Finger print magnet? I don't know! All the hard type screen protectors catch finger prints and smudges, I think, but I won't call it to the extent of being a magnet. With any tempered screen protector one thing a person should do, clean it whenever you get a chance.
If you're truly worried about fingerprints you may want to consider buying an oleophobic coating kit. It's a liquid/gel based coating that is fingerprint resistant. It's already applied to phones in the factory by default, but it wears off.
Most cases have no problem with tempered glass screen protectors.
Spigen is really good. I think they also have a fingerprint resistant one.
Sent from my SM-N9005 using Tapatalk 2
Over a year has passed since the Note PRO came out. Which is the best screen protector as of today? Has any of you used the Anoke Tempered Glass Screen Protectors 9h hardness, 2.5d Rounded Edges, 0.3mm Thickness? It seems to have received very good overall reviews.
I am still using a plastic-like screen protector from Samsung. I got it as a gift from an electronics store. The problem with it is that it is a finger print magnet. Also, as I use the device as a phone, it is easy to see lots of saliva droplets as I talk to the screen sometimes.
petercohen said:
Over a year has passed since the Note PRO came out. Which is the best screen protector as of today? Has any of you used the Anoke Tempered Glass Screen Protectors 9h hardness, 2.5d Rounded Edges, 0.3mm Thickness? It seems to have received very good overall reviews.
I am still using a plastic-like screen protector from Samsung. I got it as a gift from an electronics store. The problem with it is that it is a finger print magnet. Also, as I use the device as a phone, it is easy to see lots of saliva droplets as I talk to the screen sometimes.
Click to expand...
Click to collapse
I wont recommend a tempered glass as the extra thickness will interfere with the S-pen
petercohen said:
Over a year has passed since the Note PRO came out. Which is the best screen protector as of today? Has any of you used the Anoke Tempered Glass Screen Protectors 9h hardness, 2.5d Rounded Edges, 0.3mm Thickness? It seems to have received very good overall reviews.
I am still using a plastic-like screen protector from Samsung. I got it as a gift from an electronics store. The problem with it is that it is a finger print magnet. Also, as I use the device as a phone, it is easy to see lots of saliva droplets as I talk to the screen sometimes.
Click to expand...
Click to collapse
I used a tempered glass that i bought from aliexpress for 4.4 USD
It is good but finger prints are there too
I applied it for protection only
There are no problems with the spen as far as i know
I was going to post the link but the item is already removed
Still perfectly satisfied with my Mime tempered glass screen protector. I have no significant issue with pen use. The only issue is the gap around the bezel but I don't care one iota about that.
Sent from my SM-P900 using Tapatalk
Hi all,
I'm looking for a good glass screen protector that covers the whole screen (usually they are ones with a black or white border), but I'm really struggling to find good makes. I tried a protector from LK, but the glass was pretty cloudy and had a 'rainbow' effect raising our from the centre of the protector, it also turned out to be a disaster to remove, with the strong adhesive leaving adhesive marks and shattered glass as I tried to remove it!
Anyone else had any experience with other protectors and could make a recommendation?
I tried the 2 from Nillkin, but only one had full coverage with black edges. The glass was fine, but the edges looked cheap and tacky.
There is a video of full screen glass on YT and the guy that posted the video has posted videos here (unofficial Huawei), but he's just a shill and has no interest in answering questions, just promoting products.
https://www.youtube.com/watch?v=BxZzXd_JG4M
I use Mofis tempered glass (full coverage). It's working like a charm.
Skickat från min VTR-L29 via Tapatalk
c411umuk said:
I tried the 2 from Nillkin, but only one had full coverage with black edges. The glass was fine, but the edges looked cheap and tacky.
There is a video of full screen glass on YT and the guy that posted the video has posted videos here (unofficial Huawei), but he's just a shill and has no interest in answering questions, just promoting products.
https://www.youtube.com/watch?v=BxZzXd_JG4M
Click to expand...
Click to collapse
He called Jozinek in this forum.
---------- Post added at 11:35 AM ---------- Previous post was at 11:27 AM ----------
A friend of mine got this brand, he got it from china, it's called called smartdevil, although it's only a OEM brand, anyway, it includes a frame for accurate placement of the protector, full coverage glass protector with about 1/2mm rim to accommodate a case, liquid filler to fill up the sids rim.
no link will be provided unless you intend to flight to china to buy it, just to let you know they are available so may be some searching you can find it online or similar item since it's only a oem product.
I also had a horrible experience with the LK screen protector. Rainbow effect in the middle and really annoying adhesive at the top and bottom. The transparent screen itself was also not very clear.
I then switched to an OMOTON brand one and it is amazing! Fingerprint and smudge resistant. Fits perfectly, full coverage across the screen. Looks sturdy. Cutouts perfect. Only downside is that it ends a bit short at the top and bottom, so still exposed there unless you use a case with a lip.
Avoid LK, and give the OMOTON one a try.
DeedsOfTheDead said:
I use Mofis tempered glass (full coverage). It's working like a charm.
Skickat från min VTR-L29 via Tapatalk
Click to expand...
Click to collapse
Do you have a link to where I can find them? Tried Amazon UK and Googling, bit couldn't find anything.
boonkoh said:
I also had a horrible experience with the LK screen protector. Rainbow effect in the middle and really annoying adhesive at the top and bottom. The transparent screen itself was also not very clear.
I then switched to an OMOTON brand one and it is amazing! Fingerprint and smudge resistant. Fits perfectly, full coverage across the screen. Looks sturdy. Cutouts perfect. Only downside is that it ends a bit short at the top and bottom, so still exposed there unless you use a case with a lip.
Avoid LK, and give the OMOTON one a try.
Click to expand...
Click to collapse
Glad I'm not the only one with a bad experience with LK. Looks like the transparent Omoton protectors that don't cover the full screen are easy enough to find, but I'm struggling to find the full coverage one where did you get yours from?
https://m.aliexpress.com/item/32803815777.html#autostay
@Ally153
Skickat från min VTR-L29 via Tapatalk
Glad I'm not the only one with a bad experience with LK. Looks like the transparent Omoton protectors that don't cover the full screen are easy enough to find, but I'm struggling to find the full coverage one where did you get yours from?
Click to expand...
Click to collapse
I got my OMOTON screen protector from Amazon (prime delivery - fulfilled by Amazon). You're right, it isn't full coverage (smaller than LK's one). But its close enough to full coverage if you have a tpu case that has a good lip.
Yesterday I got my Omoton tempered glass (Amazon.co.uk), and I am dissatisfied - the glass does not fit properly on the display (air space on both sides)...
This is Nillkin's. Similar size* but adheres perfectly (sorry for crap picture).
I also tried their 3D version (full screen) but it makes the phone look very cheap.
*Actually the Omoton looks wider.
bolek007 said:
Yesterday I got my Omoton tempered glass (Amazon.co.uk), and I am dissatisfied - the glass does not fit properly on the display (air space on both sides)...
Click to expand...
Click to collapse
My friend has the same protector and it comes with a liquid adhesive to fill the gaps.
c411umuk said:
This is Nillkin's. Similar size* but adheres perfectly (sorry for crap picture).
I also tried their 3D version (full screen) but it makes the phone look very cheap.
*Actually the Omoton looks wider.
Click to expand...
Click to collapse
What was it about the 3D version you felt looked cheap? Was it easy to remove the screen protector?
Right now I'm using the GhostShield by TechGear. They are relatively cheap and difficult to install, but after watching a video on installing them, it was a little easier. They are extremely thin - almost invisible and are self healing, but any dust caught under the protector will result in a bumpy surface. I'm also not entirely sure how great the protection is they offer. My Ringke Fusion case started lifting the to corners of the protector, but I think I stretched the protector (really easy to do with a membrane protector this thin!) slightly as I tried to get the bubbles off the surface.
Still looking for the best solution to protect my screen...
Ally153 said:
What was it about the 3D version you felt looked cheap? Was it easy to remove the screen protector?
...
Click to expand...
Click to collapse
The plastic borders. It was very easy to remove as the plastic borders don't really have much in the way of adhesive.
I will try a Cafele next, when I can be bothered to order one.
Just got both of these two delivered from www.taobao.cn
first one is a anti blue ray with installation frame for exact right positioning and liquid filler for those air gaps along the edges of the protector, the second one is a normal tempered glass protector as a two piece package with the same accessories.
kms108 said:
Just got both of these two delivered from www.taobao.cn
first one is a anti blue ray with installation frame for exact right positioning and liquid filler for those air gaps along the edges of the protector, the second one is a normal tempered glass protector as a two piece package with the same accessories.
Click to expand...
Click to collapse
Could you share full link, please? Would like to buy one for mom Thank you
I got Omoton full coverage tempered glass but i am afraid its not compatible with silicone cases? It is good screen protector but sadly not ideal for cases.
It looks like cases lift screen protector on edges slightly so air gets underneath... Any good screen protectors that are not full coverage so i can still use case?
I bought the nilkin glas but the black borders around the screen protector takes a lot of screen space, I don't recommend it!
Sent from my VTR-L29 using XDA-Developers Legacy app
Benks have a really good one, it's a full coverage with white or black boarder (adhesive covers throughout the whole glass, not just the edges), just like those on the iphone, it curves and cover the edges.
Benks have two version, KR PRO this is also full coverage, glass & plastic sided and XPro+ full glass coverage.
I am using the Benks XPro+ full glass cover and I think it's great. It's a 3D glass screen protector, covers the screen perfectly, right to the edges, with no air bubles. Also it has an oleophobic coating.
D_Grunt said:
I am using the Benks XPro+ full glass cover and I think it's great. It's a 3D glass screen protector, covers the screen perfectly, right to the edges, with no air bubles. Also it has an oleophobic coating.
Click to expand...
Click to collapse
its a good product, i just got a spare one yesterday incase I need it, slightly cheap than my first one.
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs