Hello All ,
Need to install cyanogenmod 10 , but my boot loader is locked .
Can someone please upload files as all most all links are broken.
Or if you could send files through Email.
[email protected]
im still running on Android 2.3.4..
r_grsh said:
Hello All ,
Need to install cyanogenmod 10 , but my boot loader is locked .
Can someone please upload files as all most all links are broken.
Or if you could send files through Email.
[email protected]
im still running on Android 2.3.4..
Click to expand...
Click to collapse
I had nothing to do so I searched for the files, specially the photon_pudding.rar . Most of the links were dead but fortunately I found one that still alive. The site is the following: http://forum.motofan.ru/?showtopic=1731307
I attached some of the files to this post.
Thank you Reiki21
Thanks a lot.
I was about to loose hope on this.
Can you please guide me on how to unlock bootloader.
Do i keep them in ZIP format or will have to use RAR format.
r_grsh said:
Thanks a lot.
I was about to loose hope on this.
Can you please guide me on how to unlock bootloader.
Do i keep them in ZIP format or will have to use RAR format.
Click to expand...
Click to collapse
There's a guide to unlocking the Photon 2.3.4 bootloader here: http://androidforums.com/photon-4g-...-all-things-mopho-06-11-12-a.html#post4270549
Trying to install cyanogenmod 10
This is the error message i get::
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
Installation aborted
not sure whats wrong
When i reboot it say unlocked at the top but when i try to access android recovery to install cyogenmod 10 i just get a ! in a triangle and android symbol.I try pressing both volume up n down button together i just get the following screen(attached)
which has following options
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
On trying :: apply update from sd card
This is the error message i get::
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
Installation aborted
r_grsh said:
When i reboot it say unlocked at the top but when i try to access android recovery to install cyogenmod 10 i just get a ! in a triangle and android symbol.I try pressing both volume up n down button together i just get the following screen(attached)
which has following options
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
On trying :: apply update from sd card
This is the error message i get::
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
Installation aborted
Click to expand...
Click to collapse
Did you flash cwm recovery? If not then you can download it from here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.8-sunfire.img
To flash it go into fastboot mode and use the following comand:
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img
unlock failed
I tried to unlock again , this time it ran for 98% and failed , but still when i boot it shows unlocked
I wouldn't use RSD after unlocking my phone, if the process of RSD flashing is interrupted (The usb cable got disconected, a black out, etc) the phone would most likely hard brick. You said it flashed until 98%, can you still access the menu by pressing power and vol -?
yes
yes can access menu can you still access the menu by pressing power and vol
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img this img doesnot run in demon tool
Can you msg ur num to [email protected] , ill msg u on watsup all pics step by step
r_grsh said:
yes can access menu can you still access the menu by pressing power and vol
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img this img doesnot run in demon tool
Can you msg ur num to [email protected] , ill msg u on watsup all pics step by step
Click to expand...
Click to collapse
Sadly I don't have whatsup, anyways I think you just need to flash the custom recovery to be able to flash cm10. If you downloaded moto-fastboot from my attachments, unzip it on the root of you hard disk (C:\). After that copy the recovery-clockwork-5.0.2.8-sunfire.img inside moto-fastboot-win32 folder (C:\moto-fastboot-win32) See the attachment
Put your phone into fastboot mode by pressing the power button and vol -, when you see fastboot below the word unlocked press vol +
Open CMD and type:
cd \moto-fastboot-win32
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img
moto-fastboot reboot
After that you should have a new recovery menu.
done
On doing this i got the following message::
flashing partition recovery
flashing mbr to device
flashing stormgr partition : sos
what would be the next step
After that reboot your phone using moto-fastboot reboot. Now enter the recovery menu and try to flash your rom.
unable to restart
r_grsh said:
On doing this i got the following message::
flashing partition recovery
flashing mbr to device
flashing stormgr partition : sos
what would be the next step
Click to expand...
Click to collapse
now the only way to restart is by removing battery .as nothing happens on power button nor volume keys
after that trying to install cyo10 says error in \sdcard\cm-....
(status 0)
CM 10
Can you please upload any working CM 10 \ 9 .
Might be the rom im trying to install is corrupt
Which CM10 version are you trying to install? Can you provide me the link to the thread?
cm-10.1.3-xt897
cm-10.1.3-xt897
this is the one im trying , not sure where i found it .
think this is the one
https://download.cyanogenmod.org/?device=xt897
I see what's wrong that CM10 rom is for another phone, the Photon Q. This phone is the Photon 4G (MB855) which I know would confuse anyone >.< You just need to find the right CM10 for your phone and install it. I'll try to find some links and provide them to you if you can't find any.
---------- Post added at 11:44 AM ---------- Previous post was at 11:24 AM ----------
These are some JB roms I found by Th3Bill on https://www.androidfilehost.com/?w=files&flid=1911
cm-10.1-20130212-UNOFFICIAL-sunfire_fixed.zip
https://www.androidfilehost.com/?fid=9390288116658474446
cm_10_20121127_UNOFFICIAL_sunfire.zip
https://www.androidfilehost.com/?fid=9390225151984926850
BeanStalk-1.168-sunfire.zip
https://www.androidfilehost.com/?fid=9390362690511176432
sunfire_PAC_jb_alpha_v18.0.0.zip
https://www.androidfilehost.com/?fid=9390225151984926883
pa_sunfire_2.99_22NOV2012_094228.zip
https://www.androidfilehost.com/?fid=9390225151984927016
MIUIAndroid_Sunfire_3.2.8.zip
https://www.androidfilehost.com/?fid=9390288116658473841
MIUI.us.Sunfire_3.5.31_Eng_Deo_ZipA_Signed.zip
https://www.androidfilehost.com/?fid=22979706399754725
Liquid_JB_v2.0_RC9_sunfireB.zip
https://www.androidfilehost.com/?fid=9390225151984927186
kingkang_sunfire_ota_20121206B.zip
https://www.androidfilehost.com/?fid=9390225151984927184
Gapps contain the playstore and you should install it after the rom is installed
th3bill_gapps_jb_4.2.zip
https://www.androidfilehost.com/?fid=9390248398092765283
Note that these are roms ranging from 2012 to 2013, unfortunately Th3Bill had to leave development and there seem to be no new roms.
Failed again
cm-10.1-20130212-UNOFFICIAL-sunfire_fixed.zip
https://www.androidfilehost.com/?fid...88116658474446
cm_10_20121127_UNOFFICIAL_sunfire.zip
https://www.androidfilehost.com/?fid...25151984926850
downloaded both
Followed video
http://www.youtube.com/watch?v=RwmjnqDEO-I
option for rom
tweaked and standard
tried both
emmc or ext sd as primary sd
Selected EMMC
after instaling
Installer finished
while rebooting
e: error in sdcard\.....
(Status 0)
Installation aborted
After which installed gapps which completes , on rebooting i just get the logo screen with unlocked on top left and sits there for eternity
Try to follow these steps in recovery
Wipe Data / Cache
Install CM10
Reboot and wait until the device starts cm10, this may take some minutes
If CM10 starts successfully, then reboot to recovery and install gapps, after that reboot the device
If this did not work and you still in the motorola logo, then we are missing something
Related
Hi, ive been trying to load the new honeycomb update zip, comeing from cm7. Everytime i try update i get instalation aborted. Im assuming i need to fatboot erase data however ive not done this before.
Could someone give me a step by step guide on how to do this please?
chriscam09 said:
Hi, ive been trying to load the new honeycomb update zip, comeing from cm7. Everytime i try update i get instalation aborted. Im assuming i need to fatboot erase data however ive not done this before.
Could someone give me a step by step guide on how to do this please?
Click to expand...
Click to collapse
I had same problem, i think that problem is the CM recovery image that is loaded in the last CM build...
I solved the problem extracting the FolioMod1.4 recovery.img from update.zip and flashing that in recovery partition on fastboot mode...
after that you must have the foliomod recovery and can update every rom...
Maybe when you flash the new rom and make the wipe... is possible that you must erase data and erase cache...
the Step by Step:
1 - extract update.zip from foliomod to C:\ or also you can extract update.zip from ClockworkMod that are also on this forum.
2 - take your folio and enter in fastboot mode: 3 times POWER + 1 time VolUP (DON'T CLICK POWER BUTTON 4 TIMES... THIS WILL BRICK YOUR FOLIO)
3 - connect via usb your folio to your pc.
4 - in cmd, you must go to android-sdk directory and then to tools directory.
5 - enter this command: "fastboot.exe"
6 - now you can flash with this command: fastboot flash recovery C:\recovery.img
7 - now you must exit... restart folio.
8 - now you must be able to flash every rom you want...
(I recommend the clockworkmod recovery because this recovery allow you to erase data and erase cache after the rom flash)
sergi711 said:
I had same problem, i think that problem is the CM recovery image that is loaded in the last CM build...
I solved the problem extracting the FolioMod1.4 recovery.img from update.zip and flashing that in recovery partition on fastboot mode...
after that you must have the foliomod recovery and can update every rom...
Maybe when you flash the new rom and make the wipe... is possible that you must erase data and erase cache...
Click to expand...
Click to collapse
Thanks for the reply. I tried going back to foliomod 1.3. This give me the foliomod recovery menu. It still would not install tho.
Is this what you mean?
chriscam09 said:
Thanks for the reply. I tried going back to foliomod 1.3. This give me the foliomod recovery menu. It still would not install tho.
Is this what you mean?
Click to expand...
Click to collapse
I edited my first reply with a step by step
If your problem is that you try to flash foliomod and you get the exclamation and a not such file or directory error... you must follow the step by step...
hey did u tried the original toshiba ROM?
that may be useful i think
anyway, good luck to you
I have really been trying to research this on the forums...but can't really find the answers, at least not in the dumbed down version I seem to require.
I have my rezound unlocked, and rooted using zerg. I don't have a "recovery", I don't think anyway..and I can't install one, or any roms...which I really want to do.
My main problem right now is when I boot into recovery, I get to the red exclamation point, hit volume up and power, I get the message: E: Can't open/ cache/ recovery/ command...... Then when I navigate to install zip from sd card, and try to select it with the power button, I get the messages: Invalid operations. Success rebooting by reason oem-00....
I am really anxious to get this device set up the way I want it, I'm VERY excited by the potential for customization....that's the biggest reason I got it..and I will REALLY appreciate any help I can get! Thanks in advance! Scott
Con247 has a guide in the development section. I'm using the Amon Ra recovery which seems to be the only stable one right now. CWM seems to be a little quirky right now. Srosler has some good tools to use and clean rom is sense but with vz bloat removed. There are several other good ones from Nils, BAMF and others. Good luck.
sent from either NC running CM9 or Rez on Clean 1.5
I appreciate it sout....my problem now is I can't install amon ra...or anything else for that matter...because of my issues in recovery mode.
3oclockslop said:
I appreciate it sout....my problem now is I can't install amon ra...or anything else for that matter...because of my issues in recovery mode.
Click to expand...
Click to collapse
u need to install a recovery to so u can go into recover mode the most stable one i amon ra..after that is install then you be able to install roms..jus pm me ill i go thru the steps with u
Naisaelee21 said:
u need to install a recovery to so u can go into recover mode the most stable one i amon ra..after that is install then you be able to install roms..jus pm me ill i go thru the steps with u
Click to expand...
Click to collapse
How do you install the custom recovery image if i have S-on and get the same reboot by oem-00 message? i tried flashing back using H-boot and get a "Main Version is older!" message when running the update to flash back to stock n i cant boot up? i can use adb but it doesnt recognize device?!? Plz help =( i tried to reboot oem with adb and i just get .... then it sits forever till i unplug it and it says read failure wtf?!? Im not a complete idiot so what am i not seeing here?
IVXX said:
How do you install the custom recovery image if i have S-on and get the same reboot by oem-00 message? i tried flashing back using H-boot and get a "Main Version is older!" message when running the update to flash back to stock n i cant boot up? i can use adb but it doesnt recognize device?!? Plz help =( i tried to reboot oem with adb and i just get .... then it sits forever till i unplug it and it says read failure wtf?!? Im not a complete idiot so what am i not seeing here?
Click to expand...
Click to collapse
Have you put a custom recovery on this phone before? You say you are trying to flash back to stock so it sounds like you have flashed a ROM? And your message about "Main Version is older" makes me think you may have updated your mainver.... did you play with the ICS leak?
If you did try out the ICS leak check out this post for help:
http://forum.xda-developers.com/showpost.php?p=21442702&postcount=3
Its actually a friends so i dont know what happened exactly that messed it up but heres what i get when i boot into recovery,
E:Can't open /cache/recovery/command
E:set_bootloader_message_block: emmc_read_data_fail!
E:Can't mount /data/data/recovery/log
E:Can't open /data/data/recovery/log
E:set_bootloader_message_block: emmc_read_data_fail!
if i try to run anything from recovery i always get,
E:Can't mount /data/data/recovery/HTCFOTA/update_result.log
E:Can't mount /data/data/recovery/OMADM/update_result.log
E:Can't mount /data/data/recovery/log
E:Can't open /data/data/recovery/log
E:set_bootloader_message_block: emmc_read_data fail!
so i assume she had a bad update but im stumped for a way to fix it
Download Amon ra and place it on the root of your SD card. Power off the phone, remove the battery, and then replace the battery. After this is done, hold volume down and power until you boot in to fastboot. After that, it should install Amon Ra automatically.
htcdesirezgeorge said:
Download Amon ra and place it on the root of your SD card. Power off the phone, remove the battery, and then replace the battery. After this is done, hold volume down and power until you boot in to fastboot. After that, it should install Amon Ra automatically.
Click to expand...
Click to collapse
This.
Alternate directions.
Unzip the boot.img file. Reboot the phone using "adb reboot bootloader". Once in fastboot run "fastboot flash recovery recovery.img" then "fastboot reboot" and you're all done.
MrSmith317 said:
This.
Alternate directions.
Unzip the boot.img file. Reboot the phone using "adb reboot bootloader". Once in fastboot run "fastboot flash boot boot.img" then "fastboot reboot" and you're all done.
Click to expand...
Click to collapse
C:\AndroidSDK\tools\fastboot flash boot boot.img
error: cannot load 'boot.img'
I placed it on the root of my SD and and in C:\AndroidSDK\tools folder so why wont it load?
MrSmith317 said:
This.
Alternate directions.
Unzip the boot.img file. Reboot the phone using "adb reboot bootloader". Once in fastboot run "fastboot flash boot boot.img" then "fastboot reboot" and you're all done.
Click to expand...
Click to collapse
C:\AndroidSDK\tools\fastboot flash boot C:\AndroidSDK\tools\boot.
img
sending 'boot' (2560 KB)...
OKAY [ 0.436s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.760s
IVXX said:
C:\AndroidSDK\tools\fastboot flash boot C:\AndroidSDK\tools\boot.
img
sending 'boot' (2560 KB)...
OKAY [ 0.436s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.760s
Click to expand...
Click to collapse
That's my fault.. one too many kernel flashes. fastboot flash recovery <whatever recovery file>.img .
IVXX said:
C:\AndroidSDK\tools\fastboot flash boot boot.img
error: cannot load 'boot.img'
I placed it on the root of my SD and and in C:\AndroidSDK\tools folder so why wont it load?
Click to expand...
Click to collapse
You need to put the exact name of the Amon Ra recovery image in the line and it should be fastboot flash recovery "name of recovery.img" at least that's how I have flashed recovery and I have flashed the last 3 versions.
Oh , you don't place it at the root of the SD just in the same folder as fastboot unless you have a path in variables to use abd from anywhere.
I get the same signature verificationfailed message no matter what I seem to do ={ if I had the proper androidinfo.txt file could I run an update through fastboot without the signature failing? If so where can I get that info I tried to get the Cid but I got another error in fastboot.
Sent from my ADR6300 using XDA Premium App
OK so I got the phone to get passed the signature verification and got this message in recovery.
--Install /sdcard ...
E:set_boot loader_message_block: emmc_read_data fail!
Finding update package...
Opening update package...
Verifying update package...
Installing update...
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /temp/sideload/package.zip
(Status 7)
Installation aborted.
E:Can't mount /data/data/recovery/HTCFOTA/update_result.log
E:Can't mount /data/data/recovery/OMADM/update_result.log
E:Can't mount /data/data/recovery/log
E:Can't open /data/data/recovery/log
E:set_bootloader_message_block: emmc_read_data fail!
Any thoughts how to properly correct this??
Sent from my ADR6300 using XDA Premium App
Hi,
I'm currently trying to install CyanogenMod onto my HTC One X+, but keep running into problems.
I unlocked the bootloader, and installed TWRP v2.8.7.0.
I went into recovery fine, and used "adb push" to push cm-11-20150906-NIGHTLY-enrc2b.zip onto the device and install it through TWRP.
I then tap "reboot" but it always tells me that "No OS Installed", and rebooting into the bootloader to flash the boot.img and erase the cache doesn't seem to fix this issue.
I've tried a few different versions of recoveries, like CyanogenMod's recovery, but still can't seem to get it to install any OS. Always just get stuck on the HTC logo.
Am I missing an important step, or something? Thanks for your time.
hmm...sounds correct. just try it again.
1. boot into bootloader
2. flash the boot.img from the zip you want to install (for cm11 i recommend to flash nik3rs kernel http://forum.xda-developers.com/showthread.php?t=2012320)
3. reboot into recovery
4. select wipe from twrp menu
5. install the zip
6. reboot
why dont you try cm12? much better performance!
.
el-Loko said:
hmm...sounds correct. just try it again.
1. boot into bootloader
2. flash the boot.img from the zip you want to install (for cm11 i recommend to flash nik3rs kernel http://forum.xda-developers.com/showthread.php?t=2012320)
3. reboot into recovery
4. select wipe from twrp menu
5. install the zip
6. reboot
Click to expand...
Click to collapse
Ok, I tried again.
I went into the bootloader and flashed boot.img.
Then went into recovery, and did a factory reset via the wipe menu.
Then used "adb push" to push cm-11.zip to my /sdcard/.
Then I installed the zip without any issues.
But then when restarting, it still warned me no OS was installed.
Booting anyways just got me stuck at the HTC logo.
I then tried again, this time flashing the kernel with Nik3r's file.
And then doing all the same stuff as before, but still getting the no OS was installed message and stuck on the HTC logo.
Perhaps it's the ROM I'm using? I'm not sure why it's telling me "no OS is installed" right after installing one.
el-Loko said:
why dont you try cm12? much better performance!
Click to expand...
Click to collapse
I actually can't find a ROM for CM12. I just grabbed the latest from http://download.cyanogenmod.org/?device=enrc2b.
KindDino said:
Ok, I tried again.
I went into the bootloader and flashed boot.img.
Then went into recovery, and did a factory reset via the wipe menu.
Then used "adb push" to push cm-11.zip to my /sdcard/.
Then I installed the zip without any issues.
But then when restarting, it still warned me no OS was installed.
Booting anyways just got me stuck at the HTC logo.
Click to expand...
Click to collapse
I never used "adb push" to push the ROM installation .zip onto my phone.
If you've made a nandroid backup, then go back to stock and give it a try to transfer the .zip in normal USB/Phone mode.
Afterwards repeat the process as described above.
When I flashed my last CM11 ROM, I used CWM as recovery and I flashed the boot.img after full wipe and rom/gapps installation.
After flash process I restarted the phone into bootloader and flashed the boot.img via adb. Then first normal reboot of the phone.
Worked without any issues...
KindDino said:
I actually can't find a ROM for CM12. I just grabbed the latest from http://download.cyanogenmod.org/?device=enrc2b.
Click to expand...
Click to collapse
http://forum.xda-developers.com/htc...ent/rom-cyanogenmod-12-international-t2948462
Njoatun said:
I never used "adb push" to push the ROM installation .zip onto my phone.
If you've made a nandroid backup, then go back to stock and give it a try to transfer the .zip in normal USB/Phone mode.
Afterwards repeat the process as described above.
Click to expand...
Click to collapse
Sadly, I didn't know to make a backup when I started, so I cannot go back to stock at this time.
Njoatun said:
When I flashed my last CM11 ROM, I used CWM as recovery and I flashed the boot.img after full wipe and rom/gapps installation.
After flash process I restarted the phone into bootloader and flashed the boot.img via adb. Then first normal reboot of the phone.
Worked without any issues...
http://forum.xda-developers.com/htc...ent/rom-cyanogenmod-12-international-t2948462
Click to expand...
Click to collapse
I tried with TWRP again and actually decided to write down the entire log for installing the zip, maybe that'll help. It does say some things about errors, unsure if they're actual bad, or not, as it does succeed.
Of course after installing the zip, I selected 'Reboot' then 'Reboot into Bootloader', then used 'fastboot flash' to flash the boot.img with the boot.img from within the cm-12.zip.
Code:
Installing '/sdcard/cm-12.zip'..
Check for MD5 file..
Skipping MD5 check: no MD5 file found
could not detect filesystem for /dev/block/platform/sdhci-tegra.3/by-name/APP, assuming ext4
mount: failed to mount /dev/block/platform/sdhci-tegra.3/by-name/APP at /system: Invalid argument
unmount of /system failed; no such volume
Patching system image unconditionally...
could not detect filesystem for /dev/block/platform/sdhci-tegra.3/by-name/APP, assuming ext4
mount: failed to mount /dev/block/platform/sdhci-tegra.3/by-name/APP at /system: Invalid argument
unmount of /system failed: no such volume
script succeeded: result was [0.200000]
Updating partition details...
E:unable to mount '/system'
E:unable to mount '/cache'
...done
I tried CWM a few days ago while attempting this ( as it's linked in the CyanogenMod wiki ), and I just attempted it again with it and still cannot get past the logo.
Here is the log from CWM.
Code:
-- Installing: /sdcard/cm-12.zip
Finding update package...
OPening update package...
Installing update...
detected filesysystem extr4 for /dev/block/platform/sdhci-tegra.3/by-name/APP
Patching system image unconditionally...
detected filesysystem extr4 for /dev/block/platform/sdhci-tegra.3/by-name/APP
script succeeded: result was [0.200000]
Install from sdcard complete.
When rebooting back into the bootloader, I got an error about lost root access. I selected yes.
Code:
Root access possibly lost. Fix? THIS CAN NOT BE UNDONE.
- No
- Yes - Fix root (/system/xbin/su)
Seems like you've wiped your internal SD card partition, if it's unable to detect the ext4 format.
It's mentioned under Post 2 http://forum.xda-developers.com/showthread.php?t=2066390
If so... Search the forum for a solution. Never had this issue. Good luck
Njoatun said:
Seems like you've wiped your internal SD card partition, if it's unable to detect the ext4 format.
It's mentioned under Post 2 http://forum.xda-developers.com/showthread.php?t=2066390
If so... Search the forum for a solution. Never had this issue. Good luck
Click to expand...
Click to collapse
I read the post, and maybe I did wipe my SD Card. I have no idea on how to fix that, and I'll have to research more.
I would like to just use Hasoon2000's toolkit but sadly can't find a working download for it.
Same problem here! Nothing is working. It is saying no OS. Always booting into fastboot mode. Someone help. I have a Moto G3 1540
---------- Post added at 11:27 AM ---------- Previous post was at 11:18 AM ----------
Follow these steps and recover your device.
1. Unlock your bootloader if you have it locked
2. Boot into TWRP
3. Go to Wipe
4. Go to Advanced
5. Select everything except USB - OTG and SD Card
6. Boot into fastboot
7. Download the stock image of your phone
8. Flash it to your phone ( Please find it online)
9. After flashing do not reboot!!!
10. Download Cyanogenmod recovery and flash it to your device.
11. Boot into the newly installed recovery.
12. Go into Apply Update
13. Go into Apply Update from ADB
14. Sideload the Cyanogenmod using the command adb sideload filename.zip ( Replace filename with the name of your zip)
15. After Sideloading, boot into fastboot mode.
16. In fastboot mode, Select BP Tools.
17. Boom! Your device will start booting
Hope this helps you:good::good:
I had the same issue - here's how I went about this...
KindDino said:
Hi,
I'm currently trying to install CyanogenMod onto my HTC One X+, but keep running into problems.
I unlocked the bootloader, and installed TWRP v2.8.7.0.
I went into recovery fine, and used "adb push" to push cm-11-20150906-NIGHTLY-enrc2b.zip onto the device and install it through TWRP.
I then tap "reboot" but it always tells me that "No OS Installed", and rebooting into the bootloader to flash the boot.img and erase the cache doesn't seem to fix this issue.
I've tried a few different versions of recoveries, like CyanogenMod's recovery, but still can't seem to get it to install any OS. Always just get stuck on the HTC logo.
Am I missing an important step, or something? Thanks for your time.
Click to expand...
Click to collapse
I have a Nexus 7 2013 that I commonly use as both my daily driver (tablet-only) and as my ROM-testing guinea-pig. I had AOSP Android 7 installed before I wiped everything, due to an issue with Google Play (which I just couldn't fix for the life of me). When I went to flash a new ROM (AOSP Android 7.1.1), TWRP claimed that there was 'No OS'. This would mean that you definitely wiped everything - possibly including the partitions. My guess is:
If there are no partitions (esp. System, Recovery, Boot, Cache, etc.), the data meant for them may still get written to the device's storage. But the bootloader/kernel won't recognize where to pass the torch to when it's time for the system/userspace to come in.
In order to get this back , you may need either:
A) a ROM that has images for at least the System, Cache, and Boot partitions (add your own recovery if need-be).
B) a Stock ROM from the manufacturer's website, which tends to come with all of these images ready in the .zip
Once you flash one of those, you should confirm that your bootloader is unlocked. Once that is done, flash the ROM of your dreams
I hope this helped...
TWRP bootloop
el-Loko said:
hmm...sounds correct. just try it again.
1. boot into bootloader
2. flash the boot.img from the zip you want to install (for cm11 i recommend to flash nik3rs kernel http://forum.xda-developers.com/showthread.php?t=2012320)
3. reboot into recovery
4. select wipe from twrp menu
5. install the zip
6. reboot
why dont you try cm12? much better performance!
.
Click to expand...
Click to collapse
I have quite same issue.
I have TWRP 3.0.3 (that's the only version that i found and works) on my Doogee X9 Pro (MTK chip inside).
But after flashing successfully a ROM it still reboots to the recovery. (I tried it with 3 different ROMs.)
Any idea what else should/could try?
Hello, fellow Android hackers.
Short: I am trying to install CM on a L21, but fail booting into TWRP (getting only stock recovery).
What I did, working with a brand-new phone:
Unlock bootloader.
Flash TWRP 3.0.2.
Boot to TWRP. It worked.
Try flashing CM, which failed due to some failed assert. Googling revealed a thread on these forums which suggested I had to do a stock update to Marshmallow first.
Downloaded the update through EMUI's updater.
The updater booted to TWRP which aborted the installation because of a failed zip signature check.
I disabled signature checking and ran the installation again. It succeeded.
Tried to directly install CM over it. I got the error message stating I couldn't flash on top of incompatible data.
At this point, I probably should just have wiped system and flash CM, but for some reason I decided to boot to stock.
Here is where it all seems to have gone wrong.
Try to flash and boot to TWRP, like in steps 13 to 18.
Push the B340 UPDATE.APP to /sdcard/dload.
Start the phone using power + vol down + vol up.
I have verified that the phone is on B340 and the builtin updater won't find further updates.
(I have repeated this step and the following ones countless times.)
Boot to bootloader and flash TWRP. Yes, the command succeeds.
Code:
…$ sudo fastboot flash recovery twrp-3.0.2-0-kiwi.img
target reported max download size of 266338304 bytes
sending 'recovery' (45202 KB)...
OKAY [ 1.418s]
writing 'recovery'...
OKAY [ 0.641s]
finished. total time: 2.059s
fastboot reboot
adb reboot recovery # boots to stock recovery
Boot to bootloader and flash TWRP.
Hold power + vol up
I read that the duration holding the keys matters, so I tried this very often, but I always got to one of two different stock recoveries.
Factory reset and cache wipe with one of the two stock recoveries.
I also considered crushing the phone on the wall on multiple occasions, but then decided it would not help me with my goal.
Okay.
L21 with B340, how u boot to TWRP? -_-
Also, the two stock recoveries have the menu options "Download latest version and recovery, Reboot, Shutdown" and "Reboot, Wipe data/factory reset, Wipe cache partition".
I humbly thank everyone in advance who might have some contributions to share.
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b34p, but b320 is a great base and supports all custom roms..try it
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
Romiui said:
ok . as i understand ,
First Charge Ur Phone Up To 50%+
Second : Go Back To Stock L 5.0.1
Third : download The latest Nightly Version OF CM + Recovery Rom | Recovey
Forth : Flash Recovery Only Throw ADB if u got any error please Attach here if success Go to step 5
Fifth : Shut Down And HOLD Volume-up + Power As soon u see Honor logo Release Power But Keep Volume Rocked Pressed !
Last : Install The Cm After U already copy To SD Card .
Gd Luck ! .
Click to expand...
Click to collapse
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
thilak devraj said:
i will presume that you are on stock recovery,
now go to honor 5x repository and download b320 firmware
now place it in dload folder and flash
now boot to bootlader and try flashing twrp
then do not directly boot to revovery
just do fastboot reboot
then now do adb reboot recovery
youl be with twrp and forst things first ,compulsarily do a backup
then now assuming that you have transfered layest cm to sd card,
first goto wipe , then select all except internal and external sd cards , then wipe
now install, you should be good to go,
i had your issue when i was on b340, but b320 is a great base and supports all custom roms..try it
Click to expand...
Click to collapse
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears pretends to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
but I know of no way to flash recoveries via ADB.
D
Click to expand...
Click to collapse
All recoveries can be Flashed throw Fast-boot ADB Boss .
ksdug said:
(I am sorry for not answering sooner, but I have a lot on my plate right now. :/ )
Thanks for the replies.
2: As I understood it I only had to upgrade to M in the first place to be able to install CM. The downgrade will not undo whatever happened there?
3: I am not sure that I understand what you're trying to say, but I know of no way to flash recoveries via ADB. The point is that, as posted in the OP, flash via fastboot allegedly succeeds and as soon as I boot to the recovery, I'm back to stock.
Thanks. I actually tried the dload method with B140 after writing this post, but it doesn't seem to work—same with B330 (the repo doesn't contain a B320 for L21). As far as I can tell, the dload install appears to work fine: I'm getting a successful archive verification, an install meter and no error message. But the OS is not replaced.
I am uncertain if I need an actual microSD card—different sources seem to suggest different things here—but I generally would assume that, if there was no valid image in the right place, I would be getting an error message.
I am fine with whatever suggestion that wouldn't result in a brick. Data loss is fine, there's nothing on it.
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
muradulislam said:
A dumb question but do you disconnect the phone from PC or Mac after flashing twrp, firing fastboot reboot and quickly press power and vol up to boot to twrp.
If you already did that, try unlocking command once more and then try flashing it...
Click to expand...
Click to collapse
I did, but to no avail. Reunlocking had no effect either.
muradulislam said:
You can also try
Fastboot boot twrp_kiwi.img
To boot directly to twrp without flashing.
Hope any of it works.
Click to expand...
Click to collapse
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
ksdug said:
I rephrased that part as it was unclear. I didn't manage to pull off a downgrade.
I did, but to no avail. Reunlocking had no effect either.
I love you. I had totally forgotten about that. Using the boot command I managed to install CM, but I still cannot replace the stock recovery. Maybe I'll try letting CM write its own recovery with its next update, but I guess I'll leave it at that. The only downside is that my dad now needs me for doing updates. :/
Thanks very much.
Click to expand...
Click to collapse
wait......
you couldnt make it?? ok right now were are you at??
how to boot Honor 5x into TWRP
I know this is an old post, but since I tried for nearly a week to get my Honor 5x to boot in TWRP when pushing volume up + power button, I just wanted to post how I finally got it working, just in case anyone else should have the same problem...
1. First, I downloaded the latest stock rom. On my Honor 5x Android 5 (Lollipop) was installed, so I downloaded an Android 6 (marshmallow) stock rom. Make sure to get the correct version for your region (e.g. C432 for Europe). I found the correct rom file by simply googeling. If you are in a boot loop or do not have a working android on your phone, read instructions below.
2. I un-zipped the rom file and copied the update.app to my sd card to folder "dload"
3. I booted regularly into Android and started the update installation from the settings, where I could select option to install from SD card.
4. once that was done, i enabled USB debugging in developer tools and booted into TWRP from ADB with command
fastboot boot twrp-3.1.0-0-kiwi.img
5. Then, I installed SuperSu (SuperSU-v2.82-201705271822.zip)
6. Then, I flahed TWRP directly FROM TWRP. To do so, I clicked "Install" button, clicked "Install Image" and then selected TWRP file (which i copied to my SD card earlier). BE CAREFUL TO FLASH TWRP as Revovery (NOT boot). Actually, I first flashed twrp-3.0.0-0-kiwi.img, then directly after flashed twrp-3.0.2-0-kiwi.img and then I flashed twrp-3.0.0-1-kiwi.img (you see I was kind of desperate...). After that, from TWRP I booted into bootloader and again flashed twrp image from PC using adb:
fastboot flash recovery twrp-3.1.1-0-kiwi.img
7. from ADB, I again booted into TWRP
fastboot boot twrp-3.1.1-0-kiwi.img
8. ... where I once more installed TWRP.
After that I clicked reboot and selected to boot into Recovery. Then it finally worked.
After endless tries to get my phone to boot into TWRP when pushing volume up and power button, I am not sure which of the above steps made the difference. I think the important part is to update to the latest android version.
BTW: my first problem was I bricked my phone by trying to install lineageos from TWRP 3.1.1.1 and was in an endless bootloop. Here is how I got a regular android running:
I booted into bootloader (power + vol DOWN) and flashed the following files from adb (i got the files by extracting an android stock rom with Huawei Update Extractor (HuaweiUpdateExtractor_0.9.9.3.zip)):
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
Hope this helps...
It's better to post in a new thread, that will be more helpful for you
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
sk.shehbaz said:
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
Click to expand...
Click to collapse
Thanks alot bro successfully updated to cm 14.1 and volte method working now i can call directly from phone app no need of jio4g voice app thanks alot
can someone guide me how to unlock bootloader on mac via terminal
i cant seem to unlock bootloader & thus everything else fails.
& now its stuck on bootlogo..
./fastboot-mac -i 0x1ebf devices (give me no response)
./fastboot-mac -i 0x1ebf oem unlock (says OKAY - but i dont think its unlocked)
Then i did :
Advanced reboot – turn it ON
Update Cyanogen recovery – turn it OFF
Android debugging – turn it ON
Now, turn off your phone.
then i did this :
./fastboot-mac -i 0x1ebf flash recovery yu-twrp-recoveryx64.img
after this i cannot boot into recovery. the bootlogo is stuck & if i press vol+ & vol- & power, it jusst keep rebooting.
now just stuck on YU bootlogo..
i can get into fastboot mode only & from fastboot, i can do this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
this brings me to cynogen recovery 6 & from there i did a wipe everything but no custom rom can be installed... all show errors, obviously, cause theres not root.
HELP !!
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
hypermaster said:
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
Click to expand...
Click to collapse
Kindly Share me your model no. And details of your mobile
sk.shehbaz said:
Kindly Share me your model no. And details of your mobile
Click to expand...
Click to collapse
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
I tried you steps but when I place call phone restarts and goes into bootloop
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
jatintomar said:
I tried you steps but when I place call phone restarts and goes into bootloop
Click to expand...
Click to collapse
Wipe the mobile completely then first install your OS then flash the VOLTE files and see there on fastboot if any error pops up and let me know when you are entering the commands to flash VOLTE what exactly is there on fastboot showing.
hypermaster said:
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
Click to expand...
Click to collapse
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow the tutorial and first uninstall each and every drivers from windows and then start the procedure again.
And quote me so I'll get a notification of your reply.
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow this steps bro and yeah first uninstall each n every drivers from your windows then start the whole procedure again.
Update me soon will be waiting for your reply
sk.shehbaz said:
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
Click to expand...
Click to collapse
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
Did you install the drivers first Coz Pda drivers are the only one which detects my yureka in fastboot mode on windows 10
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
sk.shehbaz said:
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
Click to expand...
Click to collapse
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
Click to expand...
Click to collapse
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
Click to expand...
Click to collapse
Message me in PM bro we will sort it out bdw m also Mumbaikar