Q&A for [KERNEL][JB] fulmix.Kernel #12 [17/10/2013]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][JB] fulmix.Kernel #12 [17/10/2013]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
need help with process
xpirt said:
DOWNLOAD #12
DOWNLOAD #8
DOWNLOAD #7
DOWNLOAD #5
DOWNLOAD #3
DOWNLOAD #2
DOWNLOAD #1
SOURCES
Instructions
Changelog
F.A.Q.
Click to expand...
Click to collapse
i m new to this, i have downloaded #12.
now i cant understand the process. can you write it in detail?
Milind.joshi said:
i m new to this, i have downloaded #12.
now i cant understand the process. can you write it in detail?
Click to expand...
Click to collapse
I assume you know what a kernel and adb is, also that you have adb drivers installed and have a custom recovery. If not stop here! and do some research.
If you do then download the aptly named zip file and extract and run the bat file.
Credit: Ckpv5
Also don't quote the OP.
thanks!
Will_Xda said:
I assume you know what a kernel and adb is, also that you have adb drivers installed and have a custom recovery. If not stop here! and do some research.
If you do then download the aptly named zip file and extract and run the bat file.
Credit: Ckpv5
Also don't quote the OP.
Click to expand...
Click to collapse
yes i got it. now i m stuck with another problem. i have downloaded init.d-autorunner-stock.zip and i m trying to flash this zip file through twrp but everytime i do this , it says "Failed". is there any way to fix this?
any other way to flash the above zip file using adb?
I'm going to try this kernel. But by doing some reading about flashing kernels I really want to confirm some things before attempting to do this.
1. Is this kernel compatible with HTC desire X single sim running jelly bean stock ROM
2. Can I flash this kernel from twrp recovery.
3. Has it got OTG Support.
4. Can I revert back to stock if anything bad occurs.
Also what is the difference between this kernel and infinity kernel v7
Thanks
Sent from my HTC Desire X using XDA Free mobile app
Dev-Host is down
Hello,
since there are no devices (especially HTC devices) with less or at most the dimensions of the Desire X, I want/have to keep using the DX - even after 4.5 years. Now, I get finally troubles with updating the gApps even with only a few apps installed because of the size of the gApps and the limited internal memory. Hence, I would like to use some data2sd variant as it is still running properly on my mother's Wildfire S.
For that, I need a kernel with init.d support. Thus, I would really like to test the fulmix-kernel. Unfortunately, dev-host.st is not working for a couple of days and xpirt does not have the files anymore. Does anybody else still have a copy of the kernel or a mirror link, please?
Related
Q&A for [ROM] HDX Nexus v1.4.3
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
This rom is perfect with xposed framework and google service
As what I typed as the title, this rom is perfect. I'm running it on thor. I know that hdx 8.9 4rd gen has been released. Will there be any team working on the device of next generation? I'll be excited running a AOSP rom on my apollo of next gen.
I'll appreciate your deliberate reply.
help
I have a lack of Vietnamese
works great!
I am loving this thank you for your work. I have been running it for the last couple days and I only have a problem with Amazon music where it crashes whenever I click on or download an album in my cloud so it isn't usable. other than that minor issue it is wonderful.
Is there a step by step to do this pleaee
Plague Inc
thank u ggow for the awsome rom =)
could u please take a look on the app "plague inc"?
for me its the last thing the rom need for perfection xD
Hartley001 said:
Is there a step by step to do this pleaee
Click to expand...
Click to collapse
The basic procedure is described in first of the main thread: http://forum.xda-developers.com/kindle-fire-hdx/development/apollo-nexus-v1-1-t2835838
Unfortunately, there's no detailed step-by-step guide that describes everything in one place. If you look around the forum, you'll find the different steps.
Here are some links that might help:
Here's a thread for towelroot: http://forum.xda-developers.com/showthread.php?t=2783855
The HDX Toolkit might be another option: http://forum.xda-developers.com/showthread.php?t=2665683
Here's the thread for Safestrap: http://forum.xda-developers.com/showthread.php?t=2612772
---------- Post added at 11:16 PM ---------- Previous post was at 11:03 PM ----------
Here are some notes I took when I did the install a few weeks ago, but no guarantees that this is working or up to date.
- Apps -> Settings:
- Device: Enable ADB
- Applications -> Apps from Unknown Sources
- Host: install android-tools-adb
- Install towelroot: use Silk to download and install
https://www.towelroot.com/tr.apk
- Disable automatic updates
http://forum.xda-developers.com/showpost.php?p=53433158&postcount=72
http://forum.xda-developers.com/showthread.php?t=2036978
- Install su
http://forum.xda-developers.com/showthread.php?t=2542456
stock rom
Can i install this NexusRom on my StockRom?
Can i wipe Data, Dalvik and Cache and System on StockRom? And then install NexusRom. Does it possible?
StockRom
Can i install this ROM over StockRom?
If yes, Can i wipe dalwik, data, cache and system and then install NexusRom?
n1cklan said:
Can i install this ROM over StockRom?
If yes, Can i wipe dalwik, data, cache and system and then install NexusRom?
Click to expand...
Click to collapse
Yes you can install on stock slot. Make sure you are running stock 1x.3.1.0 before installing nexus ROM. If you are not then downgrade.
Sent from my Xperia Z using Tapatalk
I installed on my new Kindle. Dirty flash. It stuck on android logo. Tried again. Same thing. Made ROM slot. Installed all. Booted up fine. Back to safestrap and backup ROM slot. Went to stock ROM and restored. All is perfect. Just make sure you follow all the details. Don't want to make a small mistake.
Sent from my SM-N900A using XDA Premium 4 mobile app
ggow said:
Yes you can install on stock slot. Make sure you are running stock 1x.3.1.0 before installing nexus ROM. If you are not then downgrade.
Sent from my Xperia Z using Tapatalk
Click to expand...
Click to collapse
I already have NexusRom on my ROm slot1. Everything is perfect. (except last digit in time on main window)
So, can i wipe System with Data, Dalvik and Cache?
n1cklan said:
I already have NexusRom on my ROm slot1. Everything is perfect. (except last digit in time on main windows)
So, can i wipe System with Data, Dalvik and Cache?
Click to expand...
Click to collapse
In that case backup your Nexus ROM on slot1.
Then restore the backup to your stock slot.
Is there anyway to keep my apps and install this Rom? Either by backup or otherwise.
miketh2005 said:
Is there anyway to keep my apps and install this Rom? Either by backup or otherwise.
Click to expand...
Click to collapse
I always use titanium backup for all of my devices.
Sent from my SM-N900A using XDA Premium 4 mobile app
Time reset after reboot in apollo-nexus-rom-v1.4.3
Do anyone know the issue : "Time always reset to 2013/7/30 8:00am after reboot in apollo-nexus-rom-v1.4.3"?
Could you suggest how to fix it?
mark5fox said:
Do anyone know the issue : "Time always reset to 2013/7/30 8:00am after reboot in apollo-nexus-rom-v1.4.3"?
Could you suggest how to fix it?
Click to expand...
Click to collapse
It's a known issue, already reported in bugs section.
Thanks ggow!
After hours of figuring out how to get the adb drivers on my Kindle Fire HDX 7", I rollbacked firmware, followed your instructions exactly and flashed the ROM (I accidentally flashed it on "Stock ROM" in Safestrap without wiping and was wondering why it didn't work lol)
Now I can kiss goodbye to the Fire OS until this thing spoils!
THANK YOU SO MUCH ggow I LOVE YOU HOPE YOU HAD A GOOD HALLOWEEN!
Oh great! Im waiting, thanks you
Thank you vert much!
QA Bot said:
Q&A for [ROM] HDX Nexus v1.4.3
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Click to expand...
Click to collapse
@ggow , thank you very much for your work. The HDX rom work perfectly on both my Apollo and Thor.
Another question, will we get a Kikat upgrade or so?
Q&A for [ROM][UNOFFICIAL][Lollipop 5.0][Sirius] PAC-man Alpha
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][Lollipop 5.0][Sirius] PAC-man Alpha. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
script aborted: This package is for "D6502,D6503,D6506,D6543,sirius" devices; this is a "yuga".
i got this error every time i want to flash a custom rom,
i got d6503, 4.4.4 .167 rooted
team win recovery 2.7.1.0
I tried :
pac_sirius_KK.RC-3.dev_20141116-000514
pac_sirius_4.4.4.RC-2_20141031-034645
aosb_kk_1.3.7_sirius (4.4.4)
but the same error in recovery
pleeeeaaase help me.
tnx
Hello
I tgink you download the wrong rim you have an xperia z (yuga) and this rom is for an xperia z2 (sirius)
Other problem could be a wrong recovery please use the correct one for your device and than the problem should solved
Install this one via fastboot https://mega.co.nz/#!rMQ2BBBQ!4_JnRRU6tYUGerz-CxGMpk9UL89jeywL-uXvyNT0ZnY
Btw merry christmas
i got d6503
i downloaded pac_sirius_KK.RC-3.dev_20141116-000514 for it
and after i flashed it , i got no mobile network
in the zip file it has file named d6502(which this could be the problem) but i didn't find anything for d6503
any ideas?
No this is not the problem, this is a script which choose the right gsm modem for the correct device its only needed for 6502. if you have the 6503 the rom should work because i use it at my own 6503. do you have full wipe your fon and format system before flashing?? Did you flash the boot.img from the rom after installing via fastboot ?? If not do this now but it could be possible that you need to flash the baseband from a sony rom. only if you don't see your imei in settings look on it !!
rcstar6696 said:
No this is not the problem, this is a script which choose the right gsm modem for the correct device its only needed for 6502. if you have the 6503 the rom should work because i use it at my own 6503. do you have full wipe your fon and format system before flashing?? Did you flash the boot.img from the rom after installing via fastboot ?? If not do this now but it could be possible that you need to flash the baseband from a sony rom. only if you don't see your imei in settings look on it !!
Click to expand...
Click to collapse
tnx for quick reply
i did full wipe
both baseband and IMEI are unknown
how could i flash the baseband from sony rom?
---------- Post added at 10:26 PM ---------- Previous post was at 09:50 PM ----------
Plogm said:
tnx for quick reply
i did full wipe
both baseband and IMEI are unknown
how could i flash the baseband from sony rom?
Click to expand...
Click to collapse
I got it to work, thank you soon much
E: Cannot load volume /misc!
Hi guys!
I was running the latest build of Pac Rom KK (because Pac Rom is awesome).
Then I realized that there was a nightly out for Pac Rom LP that seemed to work quite well, so I decided to try and intall that (because Pac Rom is awesome).
When I tried running the installs (1. Rom, 2. Gapps, 3. SuperSU) it kept saying the above statement "E: Cannot load volume /misc!", and upon booting the phone will boot the OS, but the setup manager will crash (over and over), and the OS will be flickering and non-responsive to inputs. I'm guessing I might have busted something.
Worth noting: 1. The install did successfully install a new kernel because it is not the same as it was in the previous version.
2. It will install some of the fails, but seeing how it's lacking permissions, the install fails (goes for all three)
3. It does boot the OS, only that the OS doesn't work.
Judged by a google search, plenty of people have had this problem. However, I'm highly dependent on my phone, so I'm reaching out to you guys, hoping one of you could give me an answer faster than I can research (which I of course will continue doing. I'm not a lazy bum).
Does anyone have a fix for this or anyway to point me in the right direction?
Thank you guys so much in advance!
Did you do a full wipe? It's required
Sent from my Xperia Z2 using Tapatalk
Hello, thank you for your work.
The ROM is very good, but I found some bugs:
-The Application Audio does not open.
-Double-Tap to wake does not work
-The Non-fixed phone ringtone what I choose.
-The Alarm does not work and is changing all the time in the status bar.
-When Choose the standard for screen unlock the RELEASE is only done in two steps: Step 1 finger up and then is that drawing the unlock pattern.
Continue this great work.
Thank U,
Alexandre
Brazil
Translated by Google
recovery
can i use dual recovery?
Yes although I don't see why you would want to when you can flash any recovery you want to fota partition
Bluetooth issues
Since today my bluetooth will turn off, or not turn on at all, and will refuse to turn back on until I reboot the phone. The phone will also reset itself about once a day.
Is there anything I can send over to help track down the problem? I'm using a clean install of the latest build. I've not tried re-flashing the rom as of yet.
Pac Man beta last update
Hi,
I have last Pac Man Rom beta 1. It is very good Rom. Acc last my trips I found some issues:
1. Problem with find connection to roaming operatots. All time I needed reset my fone and connected manualy. The time to new connect was so long without waranty to success.
2. Lost galery app all time.
3. Problem with wi fi connection. Sometime it is no possible to connect with open service.
And we all are waiting for fix version !
usb otg?
hi,
this pac rom supports usb otg? running cm12.1 from infected everything works great but no otg support...
It's based on cm so if it's not in cm it's not in pac
my lock gesture doesnt work after the update, it says its wrong
Krummschi said:
my lock gesture doesnt work after the update, it says its wrong
Click to expand...
Click to collapse
Okay in PAC Gerrit it shows that something in gesture settings have changed but this should not change if its works or not
I hope you can unlock your phone and maybe you should change your gesture or set it New
Can I just flash twrp via fastboot on top of this?
Sent from my Xperia Z2 using XDA Free mobile app
JonnyZaggi said:
Can I just flash twrp via fastboot on top of this?
Sent from my Xperia Z2 using XDA Free mobile app
Click to expand...
Click to collapse
Yes look in second post in Main thread there are instructions how you should do it
rcstar6696 said:
Yes look in second post in Main thread there are instructions how you should do it
Click to expand...
Click to collapse
Thanks, saw the admin note so i posted question here so it wouldn't further spam the ROM thread
Sent from my Xperia Z2 using XDA Free mobile app
Q&A for [!UPDATE!][MOGAMI][KERNEL][ROM]//OptKernel\\[27.12.2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [!UPDATE!][MOGAMI][KERNEL][ROM]//OptKernel\\[27.12.2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wifi doesn't work
I flashed new kernel to my anzu and wifi didn't work.
So, I flashed the module in the drive, but it still doesn't work.
Is there any way for it?
taken_takezou said:
I flashed new kernel to my anzu and wifi didn't work.
So, I flashed the module in the drive, but it still doesn't work.
Is there any way for it?
Click to expand...
Click to collapse
Same for coconut...
Guys, try these ones.
Follow the intructions properly - flash kernel, then modules, eventually wipe cache.
If it doesn't work, download coconut ROM and extract /system/lib/modules to your system.
Vynikal said:
Guys, try these ones.
Follow the intructions properly - flash kernel, then modules, eventually wipe cache.
If it doesn't work, download coconut ROM and extract /system/lib/modules to your system.
Click to expand...
Click to collapse
Thank you.
Unfortunatly this module doesn't solve it.
I'll try files of the coconut ROM.
Vynikal said:
Guys, try these ones.
Follow the intructions properly - flash kernel, then modules, eventually wipe cache.
If it doesn't work, download coconut ROM and extract /system/lib/modules to your system.
Click to expand...
Click to collapse
Not working on my urushi
Can you fix the problem , your kernel is best for cm11
Rom Problem
Also when i flashed your whole rom my sd-card went crazy. Half of folders were recognized as files and the other half couldn't be opened...
But clean CM11 + modules from coconut worked fine
I tried files in your coconut rom, but it doesn't work.
Sent from my Nexus 9 using XDA Free mobile app
taken_takezou said:
I tried files in your coconut rom, but it doesn't work.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Well then, bad news. I have already deleted all cm-11.0 trees with all builded binaries and now I only focus on cm-12.0 and my new device. I'm not going to release CM11 builds anymore, but as my brother will definitely want to see Lollipop, I'll try to support it.
Q&A for Rom MIUI V5 V11.18 4.4.4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Rom MIUI V5 V11.18 4.4.4. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
mila4me said:
and if u like u can also flash miui-Hide Navigation Bar
Click to expand...
Click to collapse
How can I make transparent Navigation Bar?
/7ABEJI said:
How can I make transparent Navigation Bar?
Click to expand...
Click to collapse
go to themes app and looks online for free themes maybe u will find something idk
or try mi-tools apk but i'm not sure if its can do that
also check here maybe there http://xiaomi.eu/community/threads/mod-extended-settings-menu-options.7738/
mila4me said:
or try mi-tools apk but i'm not sure if its can do that
Click to expand...
Click to collapse
I'm try mi-tools apk (Nexus navbar options), but it's not work.
My phone has brick
i'm on .167 but when i flash miui rom my phone turn off and can't turn on. i flashed stock!
Crown.Krystal said:
i'm on .167 but when i flash miui rom my phone turn off and can't turn on. i flashed stock!
Click to expand...
Click to collapse
Looks like you haven't wiped data.
no i had wiped done then i flashed rom
no i had wiped done then i flashed rom
Crown.Krystal said:
no i had wiped done then i flashed rom
Click to expand...
Click to collapse
Then you either have a wrong kernel or your rom didn't install correctly.
Crown.Krystal said:
i'm on .167 but when i flash miui rom my phone turn off and can't turn on. i flashed stock!
Click to expand...
Click to collapse
idk man go back to stock /root/dualboot recovery then from PhilzRec. Clean to install new rom then flash stock rooted 167 boot it up turn of then again Clean to install new rom from Philz /flash rom chose your model unlocked or locked /flash gaps then restart your phone 1st boot can take a while or if your battery low it can not boot it up too. If you need rooted with dualboot recovery stock 167 4.4.4 i can upload it
good luck
here is a 167. (US - Unbranded) 4.4.4 root and dual recovery if you need it https://mega.co.nz/#!f9AyiayQ!vfHne7yyTiZl3Sql0pOPoERDJYSQXIXJEtjRllZzB6U
can you have me a kernel for miui
pec0ra said:
Then you either have a wrong kernel or your rom didn't install correctly.
Click to expand...
Click to collapse
can you give me a kernel for miui
Crown.Krystal said:
can you give me a kernel for miui
Click to expand...
Click to collapse
If you have an unlocked bootloader, the one in the zip should work fine. Otherwise you need to flash the kernel from a .167 ftf (with flashtool; select only the kennel.sin and don't check wipe data)
hey guys im interested in flashing this rom can someone give me a step by step of how to flash and what to flash, i currently have an unlocked bootloader, running eXistenZ Ultimate 4.5.0, with nut dual recovery in case anyone wanted to know, also how is the battery life and camera quality?
port miui to xperia z3
Can we port miui buy using Z2 to Z3 Rom Patcher from z3 threat...
MIUI6 - 4.4.4 for Locked and Unlocked Bootloader
Hi , i can't post in the good topic and i can't post the link too (i have less than 10 posts ...) but there's a MIUIV6 4.4.4 based released for the Z2
Try to copy miui.com/thread-2529681-1-1(.html) without the "( )"
Hope there will be a complete guide soon , thanks
miui v6
No just install boot.img in miui v6 folder join revocery and flash rom
---------- Post added at 01:06 AM ---------- Previous post was at 12:52 AM ----------
Anyone has tryed miui v6 xposed with another kernel i have lb and not working xposed
Does Anybody Have An Idea How To Get Away With Navbar On Lockscreen.?
Sent from my D6502 using XDA Free mobile app
MIUI V6
i can't do the OTA update from 5.5.1 to 5.5.8 and all the zips that i found and download on my computer are corrupted ...
It's me or general ?
Sorry for my english :angel:
I personnaly use GMD auto hide softkeys , it's a paid app but it works fine , just allow pop-up and make it unkillable .
Sent from my D6503 using XDA Free mobile app
xjerem34x said:
i can't do the OTA update from 5.5.1 to 5.5.8 and all the zips that i found and download on my computer are corrupted ...
It's me or general ?
Sorry for my english :angel:
Click to expand...
Click to collapse
I had a problem installing the ota too. Once it failed, I just went to recovery and flashed manually the zip in the "downloaded_rom" folder.
miui 6
pec0ra said:
I had a problem installing the ota too. Once it failed, I just went to recovery and flashed manually the zip in the "downloaded_rom" folder.
Click to expand...
Click to collapse
That's my error :
assert failed : apply_patch_check ("/system/app/QuickSearchBox.apk" , ... )
E: Error executing updater binary in zip '/external_sd/miui_ota_Z2_liupan_5.5.1_5.5.8_b93b291540_4.4.zip
Error flashing zip '/external ...blabla
I tried with the zip in the external sd and in the "downloaded rom" folder , same error
Q&A for [ROM] PAC Man rom for Lenovo A6000
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] PAC Man rom for Lenovo A6000. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
sunil.athavale said:
does app2sd work in pacrom?
---------- Post added at 02:59 PM ---------- Previous post was at 02:55 PM ----------
also can this rom be flashed with philz recovery?
Click to expand...
Click to collapse
app2sd not working.
yes,it can be flashed with philz recovery.i had flashed through that.
and i fixed browser problem.
How is the performance of this ROM compared with cyanogen OS ROM for lenovo and are you satisfied with this ROM?
sir why do i experiencing random reboot while playing music?...whatever music player i use?
I've rooted my phone using kingroot app initially, but unable to Flash recovery,
Then I tried your method with computer taken from XDA
ie using adb n bootloader then taken full backup in last step n installed SuperSU zip
But even now unable to flash CWM recovery, The kinguser of kingroot app has all root privilege instead of SuperSU.... I tried terminal emulator to transfer the root app privilege but the SuperSU did not get the privilege n ....... So with this method I am unable to install CWM recovery even I did follow the whole instructions but did not work* bcoz of that kingroot ...... I unrooted phone with the same kingroot n tried accordingly again but that kingroot app is neither uninstalling nor allowing others to do anything....
Pls help*
me to install CWM recovery, I wanna try new ROMs on my phone.
Sent from my Lenovo A6000
Sent from my Lenovo A6000 using XDA Free mobile app
Well u can use adb n temporarily boot CWM whenever u want
Use the codes in adb+fastboot
Download the recovery.img of cwm first n put in the adb folder
adb reboot bootloader
When boot loader comes up
fastboot boot recovery.img
Voila u r in ur cwm.. This is not a permanent flash. U can use this whenever u. Want
Well I have using this temporary method in lenovo a6000 but I want to permanently install either one ( CWM Or ,T....)
And one question
Can I flash a new rom like PAC with temporary recovery method?
And when press Vol+ n power button to in recovery mode, it shows PCB n other hardware device failed with a option of Recovery, n when I click on Recovery it does not show Install from sdcard or backup/restore.
My prime concern it Su Binary is not working it says to update but fails to update by both method automatically n manually.
Sent from my Lenovo A6000 using XDA Free mobile app
Lenovo a6000 running on PAC Man ROM RC3 cannot lock GPS
Hi guys,
I cannot get my waze apps to lock my gps coordinate. I installed CM 11 before PAC Man and the GPS is working fine. Due the problem that i have with capturing video and viewing videos, i changed to PAC Man rom. Everything works fine except the GPS functionality. Please help!
set goggle keyboard as default the back key will work
Need Update1 download link.
Hello Bass_Face bro,
You have mentioned two downloads 1. PACMAN ROM 2. UPDATE1.
In ROM downloads I can see only PACMAN ROM for download. I don't see UPDATE1 link for download. Please give me the link.
thanks.
Link for update 1?
In the downloads section,only the ROM link is given.plz give me link for update 1 .Thank You.
Vip.