Q&A for [CWM][DEV] ClockWorkMod 6.0.1.2 - BroadcomCM [COOPERVE]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CWM][DEV] ClockWorkMod 6.0.1.2 - BroadcomCM [COOPERVE]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
thanks
but dude , its not working after reboot recovery
I did install the cwm 6 via 5 one but after rebooting the recovery it goes to simple recovery mod not even cwm 5 as always does and when I restart the phone it just stacks on Logo !
Hi,
does the update.zip file work now? I read firts posts and it seems has problem installation. Or is better to flash 5.0.2.8 version?
Giobio said:
Hi,
does the update.zip file work now? I read firts posts and it seems has problem installation. Or is better to flash 5.0.2.8 version?
Click to expand...
Click to collapse
It depends, what kind of stock/custom kernel + custom mod you are referring to mate, this topic is quite old (CM9), for new stable revision (CM11) find ClockworkMod_v6.0.5.3-Cooperve ( accessible via my attachment : C7D971EC4CC8585A79903036C9AB9F82)
new version is based on MTD build, so old recovery as you mentioned, would not work on it . Restore back to stock and flash again with odin . if your sim card problems persist after flashing CM11, your baseband is probably old , so reflash some new stock firmware ( may or may not work )
ehsanotaku said:
It depends, what kind of stock/custom kernel + custom mod you are referring to mate, this topic is quite old (CM9), for new stable revision (CM11) find ClockworkMod_v6.0.5.3-Cooperve ( accessible via my attachment : C7D971EC4CC8585A79903036C9AB9F82)
new version is based on MTD build, so old recovery as you mentioned, would not work on it . Restore back to stock and flash again with odin . if your sim card problems persist after flashing CM11, your baseband is probably old , so reflash some new stock firmware ( may or may not work )
Click to expand...
Click to collapse
Thanks for your reply mate...
I've tried 2 or 3 roms and got problem with space memory(only a few MB). I decide to back to a stockrom and the file I installed is bigger than the old firmware. Anyway avery roms I installed, leaves no space to install apps. I read about cm11 and cm9 thay are pretty unstables so I decide to not instal them (I'm a cm fan).
Could be useful to change pit files? Or do you know where find an original stock samsung s5830i firmware?
@Giobio, yep, most of the stock/custom kernel and roms are full of bugs, but I am experimenting with cm11 without major problems though. Getting OTA update constantly without breaking my delta is very good . For official stock firmware the only reliable source is sammobile.com database from best of my knowledge mate ,, just go there and choose firmware from top side and you will be directed to another page with couple of choices. If you know your original PDA/CSC/MODEM choose check firmware,, not so sure ,, choose firmware database , which requires fewer queries such as your preference country/region , model and OS type.
ehsanotaku said:
@Giobio, yep, most of the stock/custom kernel and roms are full of bugs, but I am experimenting with cm11 without major problems though. Getting OTA update constantly without breaking my delta is very good . For official stock firmware the only reliable source is sammobile.com database from best of my knowledge mate ,, just go there and choose firmware from top side and you will be directed to another page with couple of choices. If you know your original PDA/CSC/MODEM choose check firmware,, not so sure ,, choose firmware database , which requires fewer queries such as your preference country/region , model and OS type.
Click to expand...
Click to collapse
Thanks again, I downloaded the stock firmware from sammobile.com. It seems different from the one I found on the web so maybe the other one wasn't so original...
fix for CWM for CM11+ ROMs
Step by step Guide for this solution is here : forum.xda-developers.com/showpost.php?p=57964725&postcount=16
Related
hello,
i have been unable to install custom ROMs on my galaxy s2, various forums indicate the installation took place but in my own case the installation process stops when ever the kernel is trying to unpack the .zip file in order to commence installation. i have followed the step by step procedures of the devs but still havent been able to. especially resurrection and batista. are there any prerequisites i need to follow. i am currently using a rooted SGS2, kernel cf-root 5.2, stockROM XXLPH 4.0.3. thnks much.
i am not an expert when it comes to resurrection or batista, but i believe that some newer roms need at least the cwm recovery that comes with cf-root 5.4 or above, so maybe you should flash a newer stock rom with a corresponding newer cf-root to begin flashing.
or, if you want, you could flash the latest siyah kernel through odin, which is compatible with both stock and aosp/aokp roms and have a nice new touch recovery that is certainly able to flash all roms as well.
also, a problem is also a question and this thread belongs in the q&a section. reported. this time someone will move it for you, in the future, please post in the correct section in the first place, for reference have a look at the thread Questions belong in Q&A.
thank you for the response. kindly advice on what stable stock roms i could try. cus i believe i have also tried with a 5.3 but still same.
just also tried the F1 nexus rom still same. maybe i need to take the S2 back to factory, like repartitioning and all, pls what do you advice cus i think something behind has been messed up.
i also noticed something, when i flash with a stock ROM, the fone reboots into the android sytem recovery and i get an error "dst read(I/0 error)". please what does this mean.
please can someone help , i can only flash ROM's through ODIN, but cannot install zip files through recovery. recovery never unpacks the files and all ROM's come as zip files. please help
Hi there
I am a total novice so i apologize if my questions are a completely non-sense.
First of all a really big thanks to the developer who built this amazing and helpful toolkit.
My father is using an S3 European version Orange branded 4.1.2 Android version .I wanted to unlock it so it can work on different gsm carrier.I've installed ALLINONE option(Flashed Insecure boot,Recovery,Root,Busybox,Rename restore Files) Twrp Custom Recovery using the UNIFIED TOOLKIT.Then i used GalaxySimUnlock apk to unlock it.All went smoothly everything is working perfect the phone is unlocked.
Now i have 1 question:
If i'd like to use the official samsung software update because now is not working due to the rooting i am guessing or send the device back to warranty (unexpected undesirable event) I will have to use option no.8 present in the toolkit(Download extract +Flash Stock Rom via Odin).And will my phone remain unlocked OR option number 2-Unroot Option will be enough?(I mention that i didn't yet installed any Custom Rom).
Thank you so much!
The most stable custom Rom available
Going to flash my first custom Rom.Need your professional advice.Which one is being considered the most stable Custom Rom?Which version of Omega Series to be more precise,already downloaded the latest version V42 but read on the forum there are some little bugs I will be very grateful for your help Thanks
hapciu90 said:
Going to flash my first custom Rom.Need your professional advice.Which one is being considered the most stable Custom Rom?Which version of Omega Series to be more precise,already downloaded the latest version V42 but read on the forum there are some little bugs I will be very grateful for your help Thanks
Click to expand...
Click to collapse
What rom best rom posts are banned .
You choose .
No custom rom is bug free decide if the bugs rule the rom out or not .
Later is generally better for any rom build .
Omega is updated very frequently .
jje
[Q&A] Galaxy Mega 6.3 Sprint Version : SPH-L600 Stock firmwares with root: Flashable
Q&A for Galaxy Mega 6.3 Sprint Version : SPH-L600 Stock firmwares with root: Flashable Zips
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Galaxy Mega 6.3 Sprint Version : SPH-L600 Stock firmwares with root: Flashable Zips. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank you )
Silesh.Nair said:
I do not own this phone.
This thread will provide custom recovery ( CWM/TWRP ) flashable zip files of the stock frmware without knox software. This way you need not upgrade using OTA and hence will be able to move between stock and custom firmware if need to.
If you use OTA to upgrade to the latest firmware, your bootloader will be upgraded to facilitate knox. Once updated there is no going back. The roms in this thread will help you overcome this issue.
The only prerequisite is that you are not already running a knox enabled bootloader. You can find this out by going into download mode and checking if knox entries are shown in bootloader screen.
You will have the following advantages.
Bootloader is not touched, hence any compatible rom can be flashed, including custom roms
Only Samsung knox files are removed
Root & Busybox
Stock kernel
Deodexed
Zipaligned
Procedure
Download the Odin version of Philz recovery or my custom twrp recovery and flash.
Reboot to recovery first else custom recovery will be replaced by stock recovery.
Flash the ROM zip file
Reboot and Njoy...
As an additional step, you can flash the modem that comes with the ROM. The procedure to flash the modem is given below.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Downloads
All files can be downloaded from my Mega folder. Choose the mega link and select SPH-L600 STOCK FIRMWARE folder. MD5 hash values are available in a separate file inside the folder.
Credits
@dsixda for creating android kitchen which makes it so easy to create a stock rom in zip format. I modified the kitchen to make it compatible with the Mega...
@MikeyMike for testing the build....
Click to expand...
Click to collapse
My Dear Friend;
You are a saviour; you saved me from a lot of hassles. The modem worked very much. I had searched this whole over the net. Tried a lot of ways but this has restored my IMEI, and the phone works perfect.
It was after the last OTA that samsung had released and blocked my touch screen, I rooted the device, and then loaded one wrong recovery and everthing was gone. I did manage to find philz recovery and loaded an original rom of samsung, but withit together I lost the IMEI. Now thanks to you I have restored my phone )
Take Care my friend ....
Glad to be of some help.
Filling EXTREMELY STUPID
I clearly can not find the Mega link I have read ever single world of this entire thread for the past 3 hours while waiting on a VERY slow download of another stock rom.
I can not what so ever find the mega link. Is there any way you can guide me.
I'm in the same boat, i can't find the mega link, any help?
Are we being trolled?
Q&A for Stock Deodexed Jellybean ROMS | DXLS8 Added [19/5]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Stock Deodexed Jellybean ROMS | DXLS8 Added [19/5]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Slimkat 4.4.4 to Stock Deodexed JB ROM
Alipk52 said:
Hope is intact for me though btw I flashed france & indian stock firmware directly from odin, and then just rooted it with stock recovery and without flashing cwm, now i haven't find a single sod or freeze issues yet, but france one is perfect and smoothest of all, inu version is bit laggy, but I am happy my measure issue is sorted now, btw 4.4 kitkat is designed to run smoothly even on a single core cpu with like 512mb ram, but as you said, they'll not gonna waste their presious time to work on our outdated phones
Click to expand...
Click to collapse
Hi there, I like to use this Deodexed JB ROM, currently on Slim-4.4.4 9 official 8260 (GT-I9100G; XXLSP; Kernal - 3.0.85+; CWM recovery 6.0.5.1). My question is will CWM 6.0.5.1 recovery will serve the purpose? what are the steps involve for flashing? Is odin is mandatory? a post outlines the following steps, is this ok? It also says to use temporary CWM, will my current CWM will do?
"Quote:
Originally Posted by iXanza
Note : You need to have CWM to flash this
Wipe data/factory reset
Format System
Flash ROM
Wipe data/factory reset
Reboot.
This comes with STOCK KERNEL WITH NO CWM. Be sure to grab the Temporary CWM Zip"
looking forward
Q&A for [ROM][STOCK][5.0.2][D620] V20C Flashable Zip
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][5.0.2][D620] V20C Flashable Zip. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
then the wifi with KDZ work?
KDZ with CSE FLASH works and WIFI NETWORK : D
nanni1989 said:
KDZ with CSE FLASH works and WIFI NETWORK : D
Click to expand...
Click to collapse
Actually, all that's needed is modem.img from the KDZ for the WiFi to work. Also normal flash should do it too.
Sent from my D620r [Stock 4.4.2 , -V- Kernel]
:good::good:
it's ok
Upload the screen shots.
Can I flash this with twrp recovery over stock kk?
D620r lolipop
When flashed via TWRP it works wifi, but not GSM. When flashed via KDZ, everything works.
Boot loop
I have a d620 that came with a v10e firmware. Two nights ago my phone updated to the 5.0.2 and I got stucked on the lg logo. Fortunately I've managed to flash it back using the stock rom. I really want to update to lollipop and I was wondering if any of you guys know how to get around the bootloop problem.
sviktoro said:
When flashed via TWRP it works wifi, but not GSM. When flashed via KDZ, everything works.
Click to expand...
Click to collapse
Use the latest version and it will work.
Can't install
IH after i'm try to install vkernel the phone is bricked now i flash stock and reunlock but when i try to install the phone doeasn't boot . is stucks on lg bootanimation, any solution?sorry for my bad english
Will It work when ive flashed another kernel?
Ive got a D620 with CM 12 installed and an Overclocking Kernel that (as far as I know) only works with the CM Rom...
How can I undo this and flash the stock kernel? I havent found it as download here...
D618 V20b lollipop BUG on COC
is there any bug on COC graphic failures on war logs and etc.? on clash of clans?
im using the stock-rom lollipop - CIS version and the bug on the COC game.
you have Screen wake up notifications with Glimpse Notifications from google play, for all lg g2 mini. perfect.
I've flashed the zip on my d620r, everything works great. There are no bugs, battery life is very good compared with KitKat 4.4.2, and smoother overall. Great job!
Upgrade from V10g to V20a keeping data
First of all, thanks to all putting effort into this development.
I own a D620r with software V10g and KitKat 4.4.2, unlocked bootloader and TWRP. I used towelroot to root it. Everything runs fine so far.
I got a notification for the official OTA update to V20a and downloaded it to the device. I tried to apply it but were stuck in a recovery loop. I learned that official OTA updates need stock recovery and I cannot apply them having TWRP installed. I applied this fix to escape from recovery loop. The device is alive again, but the LG updater app asks to apply the downloaded update once a day.
Now I found this thread. The phone is my main device and contains lots of apps and settings. I want to keep the data if possible.
A) Do I have to expect trouble when I flash the V20a from this thread without wiping the data partition?
B.1) Or would the following procedure be an alternative:
Flash stock recovery (I made a backup using Rashr)
Revert bootloader to original locked aboot
Apply OTA update
Root
Replace bootloader with the unlocked one
Flash TWRP
B.2) I read that towelroot is based on a security vulnerability of the linux kernel that is fixed with Lollipop . If that is true, can someone give a hint how to root on Lollipop?
C) Can I choose between V20c/D620 and V20a/D620r or do they belong to different devices and are incompatible?
Thanks for your time reading this post.
Thanks
Thank you for the Rom and the instructions. It works great, there are no functions that are not working.
It also solves the bug for the smartwatches that caused battery drains on Kitkat.
when a version with xposed???
peligropowers said:
when a version with xposed???
Click to expand...
Click to collapse
Never, because this is the stock rom in a flashable .zip for custom recovery.
And xposed for android 5 ist still alpha and doesn't work correct on our phone.
If you want to try xposed you can just install it.
Read the xposed thread for that.
Please don't ask any further questions about xposed here, this thread is only about zip flashable stock rom.
Thank you.
Installing this ROM
This post was a mistake. Question is below this.
I just flashed this ROM and a problem appeared
Every time I boot my phone up I get this message.
WARNING!
Current version is not available for user. Can't find matched cust for NT-code mcc/mnc[29403],subset[FF]
What does it mean?
EDIT:
Also one more question, can I update my phone OTA in case there is a new software?