Hey everyone
Having read many threads on this issue I would appreciate help for my specific case. I got a defective device from a friend that wouldn't start anymore (introductory Samsung animation was playing repeatedly). I then tried to flash "GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9" to eventually install CM 10.1.3 and then factory reset to make sure the brick bug is not an issue. However, I was not able to flash CWM, because it gets stuck at "NAND Write Start" and eventually fails (see below). Interestingly, I flashed another i9100 flawlessly only a few days ago with the exact same setting. Nonetheless I tried different Odin versions as well as different usb ports and cables.
I have no idea what kind of kernel or android version was running on the device and I can now only get into download mode.
When reading this guide I came across two problems. First, flashing a kernel - some other thread recommended "Siyah-s2-v5.0.1" - was unsuccessful. Second, I wasn't sure if I should try to flash the ICS version mentioned in this thread.
Some mentioned falling back to flashing PIT-files, but because recovery mode is not available, I cannot use the "emmc partition scanner" to identify the correct PIT-file to flash.
I would really like to save this device, so someone else may enjoy using it again in the future. Thanks in advance for any help!
Cheers
sNiXx
ODIN 3.09
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.3
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Could anyone please help me out with this issue? I would appreciate it, if I could get the device running again.
Thanks in advance for help or tips!
Related
I was on ICS 4.0.2, I downloaded 4.1.2 and tried to install using ODIN 3.04 but it does not work... ODIN shows this...
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Now I can enter download mode but phone does not boot anymore...
When I start phone normaly shows:
"firmware upgrade encountered an issue. Please select recovery mode in Kies 6 try again"
Can anyone help me figure out what to do please?
Thank you
===========================================================================
And now one error shows that can't open COM port
this is weird u.u
Turn off device, pull battery, leave for 10 mins. Install kies, reboot and try ODIN again.
Also go browse forum there are plenty of topics about flashing via ODIN. Read and learn.
I have tried many different tutorials and followed them exactly and carefully but no matter what happens Odin gets stuck on "get PIT for mapping" any ideas on what to do to fix this problem?
jonahgerber1 said:
I have tried many different tutorials and followed them exactly and carefully but no matter what happens Odin gets stuck on "get PIT for mapping" any ideas on what to do to fix this problem?
Click to expand...
Click to collapse
I got the same issue as well. One thing I noticed while in ODIN mode was that "Write Protection" is "On". Perhaps this is the reason why.
Here's what I have in ODIN
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> boot.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
What build are you guys on and what Odin files are you using?
Have either of you tried using the PIT file Surge provided?
Sent from my SCH-I545 using Tapatalk
I have a verizon samsung galaxy s3 (sch-i535) and everytime i try to flash cwm on my phone using odin it always says fail. I have tried like 5 different videos on youtube that should work but i keep getting failed because "SECURE CHECK FAIL : recovery". That's what it says on the phone. On Odin it says
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me please?! Thanks in advance.
I was going to flash a new pit file and a kernel along with that but somehow it didn't work, I got stuck at Samsung Galaxy S2 logo and couldn't boot into recovery. I assume I soft bricked my device. Then I searched some guides on how to fix it but I couldn't, and the download links are often broken in those guides. In Odin3 flash get stuck at "<ID:0/005> NAND Write Start!!" and then ERROR. Is this fixable and in that case how? Please provide download links that work if I need any file.
This is the Odin3 log when I try to flash. I try to flash the files (PDA,PHONE,CSC) in this thread ("Another option for i9100" section). I have tried with pit file and without (I think it was wrong pit though) but same result...
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well after having this problem in over 24 hours I try to flash my old stock gingerbread rom with odin and it worked. I then flashed CWM kitkat compatible Kernel and that also works. So no help needed here anymore I think.
So i haven't rooted a phone in quite some time, And decided to root my Unlocked S6 Edge (SM-G925F). Downloaded ODIN, Latest version of TWRP for my device and model, Put phone in download mode, Opened odin on computer and connected my edge, Selected TWRP and hit start then it said FAILED.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Phone is stuck on blue error screen now "An error has occured while updating....."
Any idea how to fix ?
fml12345 said:
So i haven't rooted a phone in quite some time, And decided to root my Unlocked S6 Edge (SM-G925F). Downloaded ODIN, Latest version of TWRP for my device and model, Put phone in download mode, Opened odin on computer and connected my edge, Selected TWRP and hit start then it said FAILED.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Phone is stuck on blue error screen now "An error has occured while updating....."
Any idea how to fix ?
Click to expand...
Click to collapse
What version of twrp did you try to flash?
Try a different cable. Sometimes fail at __XmitData_write occurs with a non Samsung cable.
If not just restore with smart switch or flash stock firmware with Odin then it will be back on. Then try twrp again.